1 <?xml version="1.0" encoding="UTF-8"?>
2 <!-- This document is maintained with oXygen. -->
3 <!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN" "http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd">
6 <title>Koha 16.05 Manual (en)</title>
8 <author id="manualauthor">
9 <firstname>Nicole C.</firstname>
11 <surname>Engard</surname>
14 <orgname>ByWater Solutions/BibLibre</orgname>
18 <copyright id="manualcopy">
20 <holder>Nicole C. Engard/ByWater Solutions/BibLibre</holder>
23 <legalnotice id="manuallegal">
24 <para>This manual is licensed under the <ulink url="http://www.gnu.org/licenses/gpl.html">GNU General Public License,
25 version 3</ulink> or later</para>
27 <para>Learn more about this license in the <link linkend="gpl">GPL3
28 Appendix</link></para>
31 <pubdate id="manualpubdate">Published: 2016</pubdate>
33 <chapter id="introchapter">
34 <title>Introduction</title>
35 <section id="introbasics">
36 <title><link linkend="introbasics">Koha Basics</link></title>
37 <para>Koha is the first free and open source software library automation package (ILS).
38 Development is sponsored by libraries of varying types and sizes, volunteers, and support
39 companies from around the world.</para>
40 <para>Learn more about Koha by visiting the official Koha website: <ulink url="http://koha-community.org">http://koha-community.org</ulink></para>
42 <section id="introrecommend">
43 <title><link linkend="introrecommend">Koha Recommendations</link></title>
44 <para>Full system recommendations can be found on the official Koha wiki along with the
45 developer documentation: <ulink url="http://wiki.koha-community.org">
46 http://wiki.koha-community.org</ulink></para>
47 <para>When working in the Koha staff client it is strongly recommended that you use the
48 Firefox browser. Koha's staff client is not supported in Internet Explorer and has not yet
49 been fully optimized for Google Chrome.</para>
51 <section id="usingmanual">
52 <title><link linkend="usingmanual">Using this Manual</link></title>
53 <para>This manual is always changing and suggestions for edits can be sent to the
54 Documentation Manager via the <ulink url="https://lists.koha-community.org/cgi-bin/mailman/listinfo/koha-docs">DOCS mailing
55 list</ulink>. The manual is organized by Koha module. At the start of most sections (and
56 throughout) you will find 'Get there' tips. These lines tell you how to get to the section
58 <para>For example: <emphasis>Get there:</emphasis> More > Administration > Global System
62 <screeninfo>Get there: More > Administration > Global System Preferences</screeninfo>
65 <imagedata fileref="images/intro/getthere.png"/>
70 <para>The instruction tells you where to find the necessary menu option at the top of the Koha
72 <para>Links will be found throughout the manual to other sections in the manual and images
73 will depict what should be seen on the screen. </para>
74 <para>The manual can be searched using the custom Google search on the <ulink url="http://koha-community.org/documentation/">Koha Documentation</ulink> page.</para>
76 <section id="contributing">
77 <title><link linkend="contributing">Contributing to the Manual</link></title>
78 <para>This manual is an ever-changing document and edits to the manual are welcome at any
80 <para>The <ulink url="http://manual.koha-community.org/">Koha Manual</ulink> is managed by the
81 Documentation Manager, but that doesn't mean we can't all participate in making the best
82 manual possible. </para>
83 <para>The manual is stored in git at: <ulink url="http://git.koha-community.org/gitweb/?p=kohadocs.git;a=summary">http://git.koha-community.org/gitweb/?p=kohadocs.git;a=summary</ulink></para>
84 <para>To edit the manual we recommend <ulink url="http://www.oxygenxml.com">oXygen</ulink> or
85 other XML/DocBook editor. We ask that every chapter and section have an ID tag associated
86 with it to enable permanent linking and searching. </para>
87 <para>Patches to the manual should be emailed to the <ulink url="https://lists.koha-community.org/cgi-bin/mailman/listinfo/koha-docs">DOCS mailing
88 list</ulink> and will be reviewed by the Documentation Manager before inclusion. </para>
92 <chapter id="administration">
93 <title>Administration</title>
95 <section id="globalsysprefs">
96 <title><link linkend="globalsysprefs">Global System Preferences</link></title>
98 <para>Global system preferences control the way your Koha system works
99 in general. Set these preferences before anything else in Koha.</para>
103 <para><emphasis>Get there:</emphasis> More > Administration > Global System
109 <screeninfo>Global System Preferences Link and Search</screeninfo>
113 <imagedata fileref="images/admin/globalprefs/prefsearch.png"/>
118 <para>System preferences can be searched (using any part of the
119 preference name or description) using the search box on the
120 'Administration' page or the search box at the top of each system
121 preferences page.</para>
124 <screeninfo>Preferences search at the top of System Preference
129 <imagedata fileref="images/admin/globalprefs/prefsearch1.png"/>
134 <para>When editing preferences a '(modified)' tag will appear next to
135 items you change until you click the 'Save All' button:</para>
138 <screeninfo>After editing TagsModeration the '(modified)' label
143 <imagedata fileref="images/admin/globalprefs/saveallprefs.png"/>
148 <para>After saving your preferences you'll get a confirmation message
149 telling you what preferences were saved:</para>
152 <screeninfo>Preference save confirmation message</screeninfo>
156 <imagedata fileref="images/admin/globalprefs/saveconfirmation.png"/>
161 <para>Each section of preferences can be sorted alphabetically by
162 clicking the small down arrow to the right of the word 'Preference' in
163 the header column</para>
166 <screeninfo>Sort option at the top right of each section of
167 preferences</screeninfo>
171 <imagedata fileref="images/admin/globalprefs/sortprefs.png"/>
176 <para>If the preference refers to monetary values (like <link linkend="maxoutstanding">maxoutstanding</link>) the currency displayed will be the default you set in your <link linkend="currexchangeadmin">Currency and Exchange Rate</link> administration area. In the
177 examples to follow they will all read USD for U.S. Dollars.<important>
178 <para>For libraries systems with unique URLs for each site the system preference can be
179 overridden by editing your koha-http.conf file this has to be done by a system
180 administrator or someone with access to your system files. For example if all libraries
181 but one want to have search terms highlighted in results you set the
182 OpacHighlightedWords preference to 'Highlight' then edit the koha-http.conf for the
183 library that wants this turned off by adding 'SetEnv
184 OVERRIDE_SYSPREF_OpacHighlightedWords "0"'. After restarting the web server that one
185 library will no longer see highlighted terms. Consult with your system administrator
186 for more information.</para>
189 <section id="acqprefs">
190 <title><link linkend="acqprefs">Acquisitions</link></title>
192 <para><emphasis>Get there:</emphasis> More > Administration >
193 Global System Preferences > Acquisitions</para>
195 <section id="acqprefspolicy">
196 <title><link linkend="acqprefspolicy">Policy</link></title>
198 <section id="AcqCreateItem">
199 <title><link linkend="AcqCreateItem">AcqCreateItem</link></title>
201 <para>Default: placing an order</para>
203 <para>Asks: Create an item when ___.</para>
209 <para>cataloging a record</para>
213 <para>placing an order</para>
217 <para>receiving an order</para>
221 <para>Description:</para>
225 <para>This preference lets you decide when you'd like to
226 create an item record in Koha. If you choose to add an item
227 record when 'placing an order' then you will enter item
228 information in as you place records in your basket. If you
229 choose to add the item when 'receiving an order' you will be
230 asked for item record information when you're receiving orders
231 in acquisitions. If you choose to add the item when
232 'cataloging a record' then item records will not be created in
233 acquisitions at all, you will need to go to the cataloging
234 module to add the items.</para>
238 <section id="AcqEnableFiles">
239 <title><link linkend="AcqEnableFiles">AcqEnableFiles</link></title>
240 <para>Default: Don't</para>
241 <para>Asks: ___ enable the ability to upload and attach arbitrary files to invoices. </para>
242 <para>Values:<itemizedlist>
249 </itemizedlist></para>
250 <para>Description:<itemizedlist>
252 <para>This preference controls whether or not you allow the uploading of invoice
253 files via the acquisitions module.</para>
255 </itemizedlist></para>
257 <section id="AcqItemSetSubfieldsWhenReceiptIsCancelled">
258 <title><link linkend="AcqItemSetSubfieldsWhenReceiptIsCancelled">AcqItemSetSubfieldsWhenReceiptIsCancelled</link></title>
259 <para>Asks: Upon cancelling a receipt, update the item's subfields if they were created
260 when placing an order (e.g. o=5|a="bar foo""). ___</para>
261 <para>Description:<itemizedlist>
263 <para>This preference is used in conjunction with the <link linkend="AcqItemSetSubfieldsWhenReceived">AcqItemSetSubfieldsWhenReceived</link> preference. If you have the system set
264 to enter default values when you receive you will want to have those values
265 revert back if reeipt is cancelled. This preference allows you to do
268 </itemizedlist></para>
270 <section id="AcqItemSetSubfieldsWhenReceived">
271 <title><link linkend="AcqItemSetSubfieldsWhenReceived">AcqItemSetSubfieldsWhenReceived</link></title>
272 <para>Asks: Upon receiving items, update their subfields if they were created when
273 placing an order (e.g. o=5|a="foo bar"). ___</para>
274 <para>Description:<itemizedlist>
276 <para>This preference allows you to set default values for items that you receive
277 via acquisitions. Enter the data as subfield=value and split your values with a
278 bar ( | ). For example you can remove the Ordered status on the item
279 automatically when you receive it just by entering 7=0 in this preference. That
280 will set the Not for Loan status (subfield 7) to 0 which is available.</para>
282 </itemizedlist></para>
285 <section id="AcqViewBaskets">
286 <title><link linkend="AcqViewBaskets">AcqViewBaskets</link></title>
288 <para>Default: created by staff member</para>
290 <para>Asks: Show baskets ___</para>
296 <para>created by staff member</para>
300 <para>from staff member's branch</para>
304 <para>in system, regardless of owner</para>
308 <para>Description:</para>
312 <para>When in acquisitions this preference allows you to
313 control whose baskets you can see when looking at a vendor.
314 The default value of 'created by staff member' makes it so
315 that you only see the baskets you created. Choosing to see
316 baskets 'from staff member's branch' will show you the baskets
317 created by anyone at the branch you're logged in at. Finally,
318 you can choose to set this preference to show you all baskets
319 regardless of who created it ('in system, regardless of
320 owner). Regardless of which value you choose for this
321 preference, superlibrarians can see all baskets created in the
326 <section id="AcqWarnOnDuplicateInvoice">
327 <title><link linkend="AcqWarnOnDuplicateInvoice">AcqWarnOnDuplicateInvoice</link></title>
328 <para>Default: Do not warn</para>
329 <para>Asks: ___ when the librarian tries to create an invoice with a duplicate
331 <para>Values: <itemizedlist>
333 <para>Do not warn</para>
338 </itemizedlist></para>
341 <section id="BasketConfirmations">
342 <title><link linkend="BasketConfirmations">BasketConfirmations</link></title>
344 <para>Default: always ask for confirmation</para>
346 <para>Asks: When closing or reopening a basket, ___.</para>
352 <para>always ask for confirmation</para>
356 <para>do not ask for confirmation</para>
360 <para>Descriptions:</para>
364 <para>This preference adds the option to skip confirmations on
365 closing and reopening a basket. If you skip the confirmation,
366 you do not create a new basket group.</para>
370 <section id="ClaimsBccCopy">
371 <title><link linkend="ClaimsBccCopy">ClaimsBccCopy</link></title>
372 <para>Default: Don't send</para>
373 <para>Asks: ___ blind copy (BCC) to logged in user when sending serial or acquisitions
374 claims notices. </para>
375 <para>Values:<itemizedlist>
377 <para>Don't send</para>
382 </itemizedlist></para>
383 <para>Description:<itemizedlist>
385 <para>When filing a claim in the <link linkend="serialclaims">serials</link> or
386 <link linkend="acqclaims">acquisitions</link> module this preference will
387 allow for the sending of a copy of the email to the librarian.</para>
389 </itemizedlist></para>
392 <section id="CurrencyFormat">
393 <title><link linkend="CurrencyFormat">CurrencyFormat</link></title>
395 <para>Default: 360,000.00 (US)</para>
397 <para>Asks: Display currencies using the following format
404 <para>360,000.00 (US)</para>
408 <para>360 000,00 (FR)</para>
414 <title><link linkend="gist">gist</link></title>
416 <para>Default: 0</para>
418 <para>Asks: The default tax rate is ___</para>
420 <para>Description:</para>
424 <para>This preference will allow the library to define a
425 default Goods and Services Tax rate. The default of value of 0
426 will disable this preference.</para>
431 <para>Enter this value as a number (.06) versus a percent
435 <section id="MarcFieldsToOrder">
436 <title><link linkend="MarcFieldsToOrder">MarcFieldsToOrder</link></title>
437 <para>Asks: Set the mapping values for a new order line created from a MARC record in a
439 <para>Description:<itemizedlist>
441 <para>This preference includes MARC fields to check for order information to use
442 when <link linkend="orderfromstagedfile">ordering from a staged file</link> in
443 acquisitions. You can use the following fields: price, quantity, budget_code,
444 discount, sort1, sort2.</para>
446 example:<programlisting>price: 947$a|947$c
448 budget_code: 922$a</programlisting></para>
450 </itemizedlist></para>
453 <section id="UniqueItemFields">
454 <title><link linkend="UniqueItemFields">UniqueItemFields</link></title>
456 <para>Default: barcode</para>
458 <para>Asks:___ (space-separated list of fields that should be
459 unique for items, must be valid SQL fields of <ulink url="http://schema.koha-community.org/tables/items.html">items</ulink>
462 <para>Description:</para>
466 <para>If this preference is left blank when adding items in
467 acquisitions there will be no check for uniqueness. This means
468 that a duplicate barcode can be created in acquisitions which
469 will cause errors later when checking items in and out.</para>
475 <section id="acqprefsprinting">
476 <title><link linkend="acqprefsprinting">Printing</link></title>
478 <section id="OrderPdfFormat">
479 <title><link linkend="OrderPdfFormat">OrderPdfFormat</link></title>
481 <para>Default: pdfformat::layout2pages</para>
483 <para>Asks: Use ___ when printing basket groups.</para>
488 <section id="adminprefs">
489 <title><link linkend="adminprefs">Administration</link></title>
491 <para>These preferences are general settings for your system.</para>
493 <para><emphasis>Get there:</emphasis> More > Administration >
494 Global System Preferences > Administration</para>
496 <section id="casauthentication">
497 <title><link linkend="casauthentication">CAS Authentication</link></title>
499 <para>The Central Authentication Service (CAS) is a single sign-on
500 protocol for the web. If you don't know what this is, leave these
501 preferences set to their defaults.</para>
503 <section id="AllowPKIAuth">
504 <title><link linkend="AllowPKIAuth">AllowPKIAuth</link></title>
506 <para>Default: no</para>
508 <para>Asks: Use ___ field for SSL client certificate
509 authentication</para>
519 <para>the common name</para>
523 <para>the email address</para>
528 <section id="casAuthentication">
529 <title><link linkend="casAuthentication">casAuthentication</link></title>
531 <para>Default: Don't use</para>
533 <para>Asks: ___ CAS for login authentication.</para>
536 <section id="casLogout">
537 <title><link linkend="casLogout">casLogout</link></title>
539 <para>Default: Don't logout</para>
541 <para>Asks: ___ of CAS when logging out of Koha.</para>
544 <section id="casServerUrl">
545 <title><link linkend="casServerUrl">casServerUrl</link></title>
547 <para>Asks: The CAS Authentication Server can be found at
551 <section id="googleopenid">
552 <title><link linkend="googleopenid">Google OpenID Connect</link></title>
553 <para>Visit the <ulink url="https://console.developers.google.com/">Google Developers
554 Console</ulink> to obtain OAuth 2.0 credentials such as a client ID and client secret
555 that are known to both Google and your application.<screenshot>
556 <screeninfo>Developers Console</screeninfo>
559 <imagedata fileref="images/admin/globalprefs/Google/1project.png"/>
562 </screenshot><itemizedlist>
564 <para>Create a project, and give it some details to help you identify it
567 <screeninfo>New Project</screeninfo>
570 <imagedata fileref="images/admin/globalprefs/Google/2newproject.png"/>
576 <para>Next search for the Google Identity and Access Management API</para>
578 <screeninfo>API Search</screeninfo>
581 <imagedata fileref="images/admin/globalprefs/Google/3identity.png"/>
587 <para>Enable the Google Identity and Access Management API</para>
589 <screeninfo>Enable Google Identity</screeninfo>
592 <imagedata fileref="images/admin/globalprefs/Google/4enable.png"/>
598 <para>Go to 'Credentials' and set the OAuth cosent screen values</para>
600 <screeninfo>OAuth Consent Screen</screeninfo>
603 <imagedata fileref="images/admin/globalprefs/Google/5consent.png"/>
609 <para>Next choose to 'Create credentials' from the 'Credentials' page</para>
611 <screeninfo>Create credentials</screeninfo>
614 <imagedata fileref="images/admin/globalprefs/Google/6credtype.png"/>
620 <para>Choose 'Web application' from the 'Application type' menu and fill in the form
623 <screeninfo>Create Client ID</screeninfo>
626 <imagedata fileref="images/admin/globalprefs/Google/7creds.png"/>
632 <para>Set 'Authorized JavaScript origins' to your OPACBaseURL </para>
635 <para>Change the 'Authorized Redirect URIs' to
636 http://YOUROPAC/cgi-bin/koha/svc/auth/googleopenidconnect</para>
641 <para>You will be presented with your values for your client ID and your client
642 secret after saving </para>
644 <screeninfo>OAuth Client ID and Secret</screeninfo>
647 <imagedata fileref="images/admin/globalprefs/Google/8oauth.png"/>
652 </itemizedlist></para>
653 <section id="GoogleOAuth2ClientID">
654 <title><link linkend="GoogleOAuth2ClientID">GoogleOAuth2ClientID</link></title>
655 <para>Asks: Google OAuth2 Client ID ___</para>
657 <section id="GoogleOAuth2ClientSecret">
658 <title><link linkend="GoogleOAuth2ClientSecret">GoogleOAuth2ClientSecret</link></title>
659 <para>Asks: Google OAuth2 Client Secret ___</para>
661 <section id="GoogleOpenIDConnect">
662 <title><link linkend="GoogleOpenIDConnect">GoogleOpenIDConnect</link></title>
663 <para>Default: Don't use</para>
664 <para>Asks ___ Google OpenID Connect login. <important>
665 <para>You will need to select OAuth2 when creating an app in the google cloud
666 console, and set the web origin to your_opac_url and the redirect url to
667 your_opac_url/cgi-bin/koha/svc/auth/googleopenidconnect . </para>
669 <screeninfo>Create Client ID</screeninfo>
672 <imagedata fileref="images/admin/globalprefs/Google/7creds.png"/>
677 <para>Values:<itemizedlist>
679 <para>Don't use</para>
684 </itemizedlist></para>
686 <section id="GoogleOpenIDConnectDomain">
687 <title><link linkend="GoogleOpenIDConnectDomain">GoogleOpenIDConnectDomain</link></title>
688 <para>Asks: Google OpenID Connect Restrict to domain (or subdomain of this domain) ___. <note>
689 <para>Leave blank for all google domains </para>
694 <section id="adminprefsinterface">
695 <title><link linkend="adminprefsinterface">Interface options</link></title>
697 <para>These preference are related to your Koha interface</para>
699 <section id="DebugLevel">
700 <title><link linkend="DebugLevel">DebugLevel</link></title>
702 <para>Default: lots of</para>
704 <para>Asks: Show ___ debugging information in the browser when an
705 internal error occurs.</para>
711 <para>lots of - will show as much information as
716 <para>no - will only show basic error messages</para>
720 <para>some - will show only some of the information
725 <para>Description:</para>
729 <para>This preference determines how much information will be
730 sent to the user's screen when the system encounters an error.
731 The most detail will be sent when the value level is set at 2,
732 some detail will be sent when the value is set at 1, and only
733 a basic error message will display when the value is set at 0.
734 This setting is especially important when a system is new and
735 the administration is interested in working out the bugs
736 (errors or problems) quickly. Having detailed error messages
737 makes quick fixes more likely in problem areas.</para>
741 <section id="DefaultToLoggedInLibraryCircRules">
742 <title><link linkend="DefaultToLoggedInLibraryCircRules">DefaultToLoggedInLibraryCircRules</link></title>
743 <para>Default: all libraries</para>
744 <para>Asks: When editing circulation rules show ___ the rules by default. </para>
745 <para>Values: <itemizedlist>
747 <para>all libraries</para>
750 <para>logged in library's</para>
752 </itemizedlist></para>
753 <para>Description:<itemizedlist>
755 <para>This preference controls the default value in the branch pull down found at
756 the top of the <link linkend="circfinerules">circulation and fine
759 </itemizedlist></para>
761 <section id="DefaultToLoggedInLibraryNoticesSlips">
762 <title><link linkend="DefaultToLoggedInLibraryNoticesSlips">DefaultToLoggedInLibraryNoticesSlips</link></title>
763 <para>Default: all libraries</para>
764 <para>Asks: When editing notices and slips show the ___ notices and slips by default. </para>
765 <para>Values: <itemizedlist>
767 <para>all libraries</para>
770 <para>logged in library's</para>
772 </itemizedlist></para>
773 <para>Description:<itemizedlist>
775 <para>This preference controls the default value in the branch pull down found at
776 the top of the <link linkend="notices">notices and slips</link> tool.</para>
778 </itemizedlist></para>
780 <section id="DefaultToLoggedInLibraryOverdueTriggers">
781 <title><link linkend="DefaultToLoggedInLibraryOverdueTriggers">DefaultToLoggedInLibraryOverdueTriggers</link></title>
782 <para>Default: all libraries</para>
783 <para>Asks: When editing overdue notice/status triggers show the ___ rules by default. </para>
784 <para>Values: <itemizedlist>
786 <para>all libraries</para>
789 <para>logged in library's</para>
791 </itemizedlist></para>
792 <para>Description:<itemizedlist>
794 <para>This preference controls the default value in the branch pull down found at
795 the top of the <link linkend="noticetriggers">overdue notices and
796 triggers</link>.</para>
798 </itemizedlist></para>
801 <section id="delimiter">
802 <title><link linkend="delimiter">delimiter</link></title>
804 <para>Default: semicolons</para>
806 <para>Asks: Separate columns in an exported report file with ___
817 <para>backslashes</para>
825 <para>semicolons</para>
837 <para>Description:</para>
841 <para>This preference determines how reports exported from
842 Koha will separate data. In many cases you will be able to
843 change this option when exporting if you'd like.</para>
848 <section id="KohaAdminEmailAddress">
849 <title><link linkend="KohaAdminEmailAddress">KohaAdminEmailAddress</link></title>
851 <para>This is the default 'From' address for emails unless there
852 is one for the particular branch, and is referred to when an
853 internal error occurs.</para>
855 <para>Asks: Use ___ as the email address for the administrator of
858 <para>Description:</para>
862 <para>This preference allows one email address to be used in
863 warning messages set to the OPAC. If no email address is set
864 for the branch this address will receive messages from patrons
865 regarding modification requests, purchase suggestions, and
866 questions or information regarding overdue notices. It is
867 recommended that a email address that can be accessed by
868 multiple staff members be used for this purpose so that if one
869 librarian is out the others can address these requests. This
870 email address can be changed when needed.</para>
875 <section id="noItemTypeImages">
876 <title><link linkend="noItemTypeImages">noItemTypeImages</link></title>
878 <para>Default: Show</para>
880 <para>Asks: ___ itemtype icons in the catalog.</para>
890 <para>Don't show</para>
894 <para>Description:</para>
898 <para>This preference allows the system administrator to
899 determine if users will be able to set and see an <link linkend="itemtypeadmin">item type icon</link> the catalog on
900 both the OPAC and the Staff Client. The images will display in
901 both the OPAC and the Staff Client/Intranet. If images of item
902 types are disabled, text labels for item types will still
903 appear in the OPAC and Staff Client.</para>
907 <section id="ReplytoDefault">
908 <title><link linkend="ReplytoDefault">ReplytoDefault</link></title>
909 <para>Asks: Use ___ as the email address that will be set as the replyto in emails </para>
910 <para>Description:<itemizedlist>
912 <para>By default replies to notice emails will go to the <link linkend="libsgroups">library email address</link>, if you would like to
913 specify a default email address for all replies to notices you can do that
916 </itemizedlist></para>
918 <section id="ReturnpathDefault">
919 <title><link linkend="ReturnpathDefault">ReturnpathDefault</link></title>
920 <para>Asks: Use ___ as the email address set as the return path, if you leave this empty
921 the KohaAdminEmailAddress will be used. </para>
922 <para>Description:<itemizedlist>
924 <para>The return path is the email address that bounces will be delivered to. By
925 default bounced notices will go to the <link linkend="libsgroups">library email
926 address</link>, if you would like to specify a default email address for
927 bounces to go to then fill in this preference.</para>
929 </itemizedlist></para>
932 <section id="virtualshelves">
933 <title><link linkend="virtualshelves">virtualshelves</link></title>
935 <para>Default: Allow</para>
937 <para>Asks: ___ staff and patrons to create and view saved lists
948 <para>Don't Allow</para>
952 <para>Description:</para>
956 <para>This preference controls whether the lists functionality
957 will be available in the staff client and OPAC. If this is set
958 to "Don't allow" then no one will be able to save items to
959 public or private lists.</para>
965 <section id="adminprefslogin">
966 <title><link linkend="adminprefslogin">Login options</link></title>
968 <para>These preferences are related to logging into your Koha
971 <section id="AutoLocation">
972 <title><link linkend="AutoLocation">AutoLocation</link></title>
974 <para>Default: Don't require</para>
976 <para>Asks: ___ staff to log in from a computer in the IP address
977 range specified by their library (if any).</para>
981 <para>Set IP address range in the library administration
986 <para><emphasis>Get there:</emphasis> More >
987 Administration > Basic Parameters > <link linkend="libsgroups">Libraries & Groups</link></para>
997 <para>Don't require</para>
1001 <para>Require</para>
1005 <para>Description:</para>
1009 <para>This preference protects the system by blocking
1010 unauthorized users from accessing the staff client program and
1011 settings. Authorized and unauthorized users are determined by
1012 their computer's IP addresses. When the preference is set to
1013 'Require', IP authorization is in effect and unauthorized IP
1014 addresses will be blocked. This means that staff cannot work
1015 from home unless their IP address has been authorized. When
1016 set to 'Don't require', anyone with a staff client login will
1017 have access no matter which IP address they are using.</para>
1022 <section id="IndependentBranches">
1023 <title><link linkend="IndependentBranches">IndependentBranches</link></title>
1024 <para>Default: Don't prevent</para>
1025 <para>Asks: ___ staff (but not superlibrarians) from modifying objects (holds, items,
1026 patrons, etc.) belonging to other libraries.</para>
1027 <para>Values:</para>
1030 <para>Don't prevent</para>
1033 <para>Prevent</para>
1036 <para>Description:</para>
1039 <para>This preference should only be used by library systems which are sharing a
1040 single Koha installation among multiple branches but are considered independent
1041 organizations, meaning they do not share material or patrons with other branches
1042 and do not plan to change that in the future. If set to 'Prevent' it increases the
1043 security between library branches by: prohibiting staff users from logging into
1044 another branch from within the staff client, filtering out patrons from patron
1045 searches who are not a part of the login branch conducting the search, limiting
1046 the location choices to the login branch when adding or modifying an item record,
1047 preventing users from other branch locations from placing holds or checking out
1048 materials from library branches other than their own, and preventing staff from
1049 editing item records which belong to other library branches. All of these security
1050 safeguards can be overridden only by the superlibrarian, the highest level of
1055 <para>It is important that this value be set before going live and that it NOT be
1059 <section id="SessionRestrictionByIP">
1060 <title><link linkend="SessionRestrictionByIP">SessionRestrictionByIP</link></title>
1061 <para>Default: Enable</para>
1062 <para>Asks: ___ check for change in remote IP address for session security. Disable only
1063 when remote IP address changes frequently. </para>
1064 <para>Values:<itemizedlist>
1066 <para>Disable</para>
1071 </itemizedlist></para>
1072 <para>Description:<itemizedlist>
1074 <para>When this preference is set to 'Enable' Koha will log you out of the staff
1075 client if your IP address changes as a security measure. For some systems the
1076 IP address changes frequently so you'll want to set this preference to 'Disable'
1077 to prevent Koha from logging you out of the staff client every time that
1080 </itemizedlist></para>
1082 <para>This is meant to help those whose IP address changes several times during the
1083 day, setting this preference to 'Disable' is not recommended otherwise because it is
1084 removing important security features from your staff client.</para>
1088 <section id="SessionStorage">
1089 <title><link linkend="SessionStorage">SessionStorage</link></title>
1091 <para>Default: in the MySQL database</para>
1093 <para>Asks: Store login session information ___</para>
1095 <para>Values:</para>
1099 <para>as temporary files</para>
1103 <para>in the MySQL database</para>
1107 <para>in the PostgreSQL database</para>
1112 <para>PostgreSQL is not yet supported</para>
1119 <para>Description:</para>
1123 <para>This preference allows administrators to choose what
1124 format session data is stored in during web sessions.</para>
1129 <section id="timeout">
1130 <title><link linkend="timeout">timeout</link></title>
1132 <para>Default: 12000000</para>
1134 <para>Asks: Automatically log out users after ___ seconds of inactivity.</para>
1136 <para>Description:</para>
1140 <para>This preference sets the length of time the Staff Client
1141 or OPAC accounts can be left inactive before re-logging in is
1142 necessary. The value of this preference is in seconds. At this
1143 time, the amount of time before a session times out must be
1144 the same for both the Staff Client and the OPAC.</para>
1149 <section id="mozillapersona">
1150 <title><link linkend="mozillapersona">Mozilla Persona</link></title>
1151 <section id="persona">
1152 <title><link linkend="persona">Persona</link></title>
1153 <para>Default: Don't allow</para>
1154 <para>Asks: ___ Mozilla persona for login.</para>
1155 <para>Values:</para>
1160 <screeninfo>Persona login on OPAC</screeninfo>
1163 <imagedata fileref="images/admin/globalprefs/persona.png"/>
1169 <para>Don't allow</para>
1172 <para>Description:<itemizedlist>
1174 <para>Mozilla Persona is an OpenID-like service that lets you log in to multiple
1175 websites with your Mozilla credentials. If you allow Persona log in for Koha
1176 then your patrons can log in to the OPAC using their Mozilla Persona. Learn
1177 more about Persona on the <ulink url="http://www.mozilla.org/en-US/persona/">official Mozilla site</ulink>.<important>
1178 <para>For Persona log in to work you will need you <link linkend="OPACBaseURL">OPACBaseURL</link> preference to be set correctly.</para>
1181 </itemizedlist></para>
1184 <section id="heaprefs">
1185 <title><link linkend="heaprefs">Share anonymous usage statistics</link></title>
1186 <para>As an open source project Koha is used all over the world. These preference will
1187 help us keep more accurate statistics on where Koha is being used. If you choose to
1188 share your information, it will be published on the <ulink url="http://hea.koha-community.org">Hea Koha community website</ulink>. You will need
1189 to enable the <link linkend="usagecron">matching cron job</link> to send this
1190 information at regular intervals to the community.</para>
1191 <section id="UsageStats">
1192 <title><link linkend="UsageStats">UsageStats</link></title>
1193 <para>Default: Don't share</para>
1194 <para>Asks: ___ anonymous Koha usage data with the Koha community.</para>
1195 <para>Values:<itemizedlist>
1197 <para>Don't share</para>
1202 </itemizedlist></para>
1203 <para>Description:<itemizedlist>
1205 <para>This data is stored to help track usage of Koha around the world. If you
1206 choose to share your information, it will be published on the <ulink url="http://hea.koha-community.org">Hea Koha community website</ulink>. This
1207 information is sent using the <link linkend="usagecron">Usage Sharing Cron
1210 </itemizedlist></para>
1212 <section id="UsageStatsCountry">
1213 <title><link linkend="UsageStatsCountry">UsageStatsCountry</link></title>
1214 <para>Asks: The country where your library is located: ___</para>
1215 <para>Description:<itemizedlist>
1217 <para>This data is stored to help track usage of Koha around the world. If you
1218 choose to share your information, it will be published on the <ulink url="http://hea.koha-community.org">Hea Koha community website</ulink>. This
1219 information is sent using the <link linkend="usagecron">Usage Sharing Cron
1222 </itemizedlist></para>
1224 <para>This preference depends on the <link linkend="UsageStats">UsageStats</link>
1225 preference. Set that to 'Share' to share your information.</para>
1228 <section id="UsageStatsLibraryName">
1229 <title><link linkend="UsageStatsLibraryName">UsageStatsLibraryName</link></title>
1230 <para>Asks: The library name ___ will be shown on the <ulink url="http://hea.koha-community.org">Hea Koha community website</ulink>.</para>
1231 <para>Description:<itemizedlist>
1233 <para>This data is stored to help track usage of Koha around the world. If you
1234 choose to share your information, it will be published on the <ulink url="http://hea.koha-community.org">Hea Koha community website</ulink>. This
1235 information is sent using the <link linkend="usagecron">Usage Sharing Cron
1238 </itemizedlist></para>
1240 <para>This preference depends on the <link linkend="UsageStats">UsageStats</link>
1241 preference. Set that to 'Share' to share your information. If this field is empty
1242 data will be sent anonymously if you choose 'Share' for the <link linkend="UsageStats">UsageStats</link> preference. </para>
1245 <section id="UsageStatsLibraryType">
1246 <title><link linkend="UsageStatsLibraryType">UsageStatsLibraryType</link></title>
1247 <para>Default: public</para>
1248 <para>Asks: The library type ___ will be shown on the <ulink url="http://hea.koha-community.org">Hea Koha community website</ulink>.</para>
1249 <para>Values:<itemizedlist>
1251 <para>academic </para>
1254 <para>corporate </para>
1257 <para>government </para>
1260 <para>private </para>
1263 <para>public </para>
1266 <para>religious organization </para>
1269 <para>research </para>
1272 <para>school </para>
1275 <para>society or association </para>
1278 <para>subscription</para>
1280 </itemizedlist></para>
1281 <para>Description:<itemizedlist>
1283 <para>This data is stored to help track usage of Koha around the world. If you
1284 choose to share your information, it will be published on the <ulink url="http://hea.koha-community.org">Hea Koha community website</ulink>. This
1285 information is sent using the <link linkend="usagecron">Usage Sharing Cron
1288 </itemizedlist></para>
1290 <para>This preference depends on the <link linkend="UsageStats">UsageStats</link>
1291 preference. Set that to 'Share' to share your information. </para>
1294 <section id="UsageStatsLibraryUrl">
1295 <title><link linkend="UsageStatsLibraryUrl">UsageStatsLibraryUrl</link></title>
1296 <para>Asks: The library URL ___ will be shown on the <ulink url="http://hea.koha-community.org">Hea Koha community website</ulink>.</para>
1297 <para>Description:<itemizedlist>
1299 <para>This data is stored to help track usage of Koha around the world. If you
1300 choose to share your information, it will be published on the <ulink url="http://hea.koha-community.org">Hea Koha community website</ulink>. This
1301 information is sent using the <link linkend="usagecron">Usage Sharing Cron
1304 </itemizedlist></para>
1306 <para>This preference depends on the <link linkend="UsageStats">UsageStats</link>
1307 preference. Set that to 'Share' to share your information. </para>
1313 <section id="authprefs">
1314 <title><link linkend="authprefs">Authorities</link></title>
1316 <para><emphasis>Get there:</emphasis> More > Administration >
1317 Global System Preferences > Authorities</para>
1319 <section id="generalauthorities">
1320 <title><link linkend="generalauthorities">General</link></title>
1322 <section id="AuthDisplayHierarchy">
1323 <title><link linkend="AuthDisplayHierarchy">AuthDisplayHierarchy</link></title>
1325 <para>Default: Don't display</para>
1327 <para>Asks: ___ broader term/narrower term hierarchies when
1328 viewing authorities.</para>
1330 <para>Values:</para>
1334 <para>Display</para>
1337 <screeninfo>AuthDisplayHierarchy</screeninfo>
1341 <imagedata fileref="images/admin/globalprefs/AuthDisplayHierarchy.png"/>
1348 <para>Don't display</para>
1352 <para>Description:</para>
1356 <para>If your authority records includes 5xx fields with
1357 linked references to broader and/or narrower see also
1358 references this preference will turn on a display of those
1359 authorities at the top of the record.</para>
1364 <section id="AutoCreateAuthorities">
1365 <title><link linkend="AutoCreateAuthorities">AutoCreateAuthorities</link></title>
1367 <para>Default: do not generate</para>
1369 <para>Asks: When editing records, ___ authority records that are
1372 <para>Values:</para>
1376 <para>do not generate</para>
1380 <para>generate</para>
1385 <para><link linkend="BiblioAddsAuthorities">BiblioAddsAuthorities</link>
1386 must be set to "allow" for this to have any effect</para>
1389 <para>Description:</para>
1393 <para>When this and <link linkend="BiblioAddsAuthorities">BiblioAddsAuthorities</link>
1394 are both turned on, automatically create authority records for
1395 headings that don't have any authority link when cataloging.
1396 When BiblioAddsAuthorities is on and AutoCreateAuthorities is
1397 turned off, do not automatically generate authority records,
1398 but allow the user to enter headings that don't match an
1399 existing authority. When BiblioAddsAuthorities is off, this
1400 has no effect.</para>
1405 <section id="BiblioAddsAuthorities">
1406 <title><link linkend="BiblioAddsAuthorities">BiblioAddsAuthorities</link></title>
1408 <para>Default: allow</para>
1410 <para>Asks: When editing records, ___ them to automatically create
1411 new authority records if needed, rather than having to reference
1412 existing authorities.</para>
1414 <para>Values:</para>
1422 <para>This setting allows you to type values in the fields
1423 controlled by authorities and then adds a new authority if
1424 one does not exist</para>
1430 <para>don't allow</para>
1434 <para>This setting will lock the authority controlled
1435 fields, forcing you to search for an authority versus
1436 allowing you to type the information in yourself.</para>
1443 <section id="dontmerge">
1444 <title><link linkend="dontmerge">dontmerge</link></title>
1446 <para>Default: Don't</para>
1448 <para>Asks: ___ automatically update attached biblios when
1449 changing an authority record.</para>
1451 <para>Values:</para>
1463 <para>Description:</para>
1467 <para>This preference tells Koha how to handle changes to your Authority records. If
1468 you edit an authority record and this preference is set to 'Do' Koha will
1469 immediately update all of the bib records linked to the authority with the new
1470 authority record's data. If this is set to "Don't" then Koha won't edit bib
1471 records when changes are made to authorities, rather, this is done later by the
1472 <link linkend="mergeauthcron">merge_authority.pl cronjob</link>.</para>
1477 <para>If this is set to "Don't automatically update" you will need to ask your
1478 administrator to enable the <link linkend="mergeauthcron">merge_authority.pl
1479 cronjob</link>.</para>
1483 <section id="MARCAuthorityControlField008">
1484 <title><link linkend="MARCAuthorityControlField008">MARCAuthorityControlField008</link></title>
1486 <para>Default: || aca||aabn | a|a d</para>
1488 <para>Asks: Use the following text for the contents of MARC21 authority control field
1489 008 position 06-39 (fixed length data elements).</para>
1492 <para>Do not include the date (position 00-05) in this
1493 preference, Koha will calculate automatically and put that in
1494 before the values in this preference.</para>
1495 </important>Description:</para>
1499 <para>This preference controls the default value in the 008
1500 field on Authority records. It does not effect bibliographic
1505 <section id="UNIMARCAuthorityField100">
1506 <title><link linkend="UNIMARCAuthorityField100">UNIMARCAuthorityField100</link></title>
1507 <para>Default: afrey50 ba0</para>
1508 <para>Asks: Use the following text for the contents of UNIMARC authority field 100
1509 position (fixed length data elements). <important>
1510 <para>Do not include the date (position 00-07) in this preference, Koha will
1511 calculate automatically and put that in before the values in this
1514 <para>Description:<itemizedlist>
1516 <para>This preference controls the default value in the 100 field on Authority
1517 records cataloged in UNIMARC. It does not effect bibliographic records.</para>
1519 </itemizedlist></para>
1522 <section id="UseAuthoritiesForTracings">
1523 <title><link linkend="UseAuthoritiesForTracings">UseAuthoritiesForTracings</link></title>
1525 <para>Default: Don't use</para>
1527 <para>Asks: ___ authority record numbers instead of text strings
1528 for searches from subject tracings.</para>
1530 <para>Values:</para>
1534 <para>Don't use</para>
1538 <para>Search links look for subject/author keywords
1539 (example: opac-search.pl?q=su:Business%20networks)</para>
1549 <para>Search links look for an authority record (example:
1550 opac-search.pl?q=an:354)</para>
1556 <para>Description:</para>
1560 <para>For libraries that have authority files, they may want
1561 to make it so that when a link to an authorized subject or
1562 author is clicked on the OPAC or staff client it takes the
1563 searcher only to a list of results with that authority record.
1564 Most libraries do not have complete authority files and so
1565 setting this preference to 'Don't use' will allow searchers to
1566 click on links to authors and subject headings and perform a
1567 keyword search against those fields, finding all possible
1568 relevant results instead.</para>
1574 <section id="linkerauthorities">
1575 <title><link linkend="linkerauthorities">Linker</link></title>
1577 <para>These preferences will control how Koha links bibliographic records to authority
1578 records. All bibliographic records added to Koha after these preferences are set will
1579 link automatically to authority records, for records added before these preferences are
1580 set there is a script (misc/link_bibs_to_authorities.pl) that your system administrator
1581 can run to link records together.</para>
1583 <section id="CatalogModuleRelink">
1584 <title><link linkend="CatalogModuleRelink">CatalogModuleRelink</link></title>
1586 <para>Default: Do not</para>
1588 <para>Asks: ___ automatically relink headings that have previously
1589 been linked when saving records in the cataloging module.</para>
1591 <para>Values:</para>
1603 <para>Description:</para>
1607 <para>Longtime users of Koha don't expect the authority and
1608 bib records to link consistently. This preference makes it
1609 possible to disable authority relinking in the cataloging
1610 module only (i.e. relinking is still possible if
1611 link_bibs_to_authorities.pl is run). Note that though the
1612 default behavior matches the previous behavior of Koha
1613 (retaining links to outdated authority records), it does not
1614 match the intended behavior (updating biblio/authority link
1615 after bibliographic record is edited). Libraries that want the
1616 intended behavior of authority control rather than the way
1617 Koha used to handle linking should set CatalogModuleRelink to
1618 'Do'. Once setting this to 'Do' the following preferences can
1624 <section id="LinkerKeepStale">
1625 <title><link linkend="LinkerKeepStale">LinkerKeepStale</link></title>
1627 <para>Default: Do not</para>
1629 <para>Asks: ___ keep existing links to authority records for
1630 headings where the linker is unable to find a match.</para>
1632 <para>Values:</para>
1644 <para>Description:</para>
1648 <para>When set to 'Do', the linker will never remove a link to
1649 an authority record, though, depending on the value of <link linkend="LinkerRelink">LinkerRelink</link>, it may change the
1655 <section id="LinkerModule">
1656 <title><link linkend="LinkerModule">LinkerModule</link></title>
1658 <para>Default: Default</para>
1660 <para>Asks: Use the ___ linker module for matching headings to
1661 authority records.</para>
1663 <para>Values:</para>
1667 <para>Default</para>
1671 <para>Retains Koha's previous behavior of only creating
1672 links when there is an exact match to one and only one
1673 authority record; if the <link linkend="LinkerOptions">LinkerOptions</link> preference is
1674 set to 'broader_headings', it will try to link headings to
1675 authority records for broader headings by removing
1676 subfields from the end of the heading</para>
1682 <para>First match</para>
1686 <para>Creates a link to the first authority record that
1687 matches a given heading, even if there is more than one
1688 authority record that matches</para>
1694 <para>Last match</para>
1698 <para>Creates a link to the last authority record that
1699 matches a given heading, even if there is more than one
1700 record that matches</para>
1706 <para>Description:</para>
1710 <para>This preference tells Koha which match to use when
1711 searching for authority matches when saving a record.</para>
1716 <section id="LinkerOptions">
1717 <title><link linkend="LinkerOptions">LinkerOptions</link></title>
1719 <para>Asks: Set the following options for the authority linker
1721 <para>This feature is experimental and shouldn't be used in a
1722 production environment until further expanded upon.</para>
1725 <para>Description:</para>
1729 <para>This is a pipe separated (|) list of options. At the
1730 moment, the only option available is "broader_headings." With
1731 this option set to "broader_headings", the linker will try to
1732 match the following heading as follows:<programlisting>=600 10$aCamins-Esakov, Jared$xCoin collections$vCatalogs$vEarly works to 1800.</programlisting></para>
1734 <para>First: Camins-Esakov, Jared--Coin
1735 collections--Catalogs--Early works to 1800</para>
1737 <para>Next: Camins-Esakov, Jared--Coin
1738 collections--Catalogs</para>
1740 <para>Next: Camins-Esakov, Jared--Coin collections</para>
1742 <para>Next: Camins-Esakov, Jared (matches! if a previous
1743 attempt had matched, it would not have tried this)</para>
1748 <section id="LinkerRelink">
1749 <title><link linkend="LinkerRelink">LinkerRelink</link></title>
1751 <para>Default: Do</para>
1753 <para>Asks: ___ relink headings that have previously been linked
1754 to authority records.</para>
1756 <para>Values:</para>
1768 <para>Description:</para>
1772 <para>When set to 'Do', the linker will confirm the links for
1773 headings that have previously been linked to an authority
1774 record when it runs, correcting any incorrect links it may
1775 find. When set to 'Do not', any heading with an existing link
1776 will be ignored, even if the existing link is invalid or
1784 <section id="catprefs">
1785 <title><link linkend="catprefs">Cataloging</link></title>
1787 <para><emphasis>Get there:</emphasis> More > Administration >
1788 Global System Preferences > Cataloging</para>
1790 <section id="catdisplayprefs">
1791 <title><link linkend="catdisplayprefs">Display</link></title>
1794 <section id="AcquisitionDetails">
1795 <title><link linkend="AcquisitionDetails">AcquisitionDetails</link></title>
1796 <para>Default: Display</para>
1797 <para>Asks: ___ acquisition details on the biblio detail page. </para>
1798 <para>Values:<itemizedlist>
1800 <para>Display</para>
1803 <para>Don't display</para>
1805 </itemizedlist></para>
1806 <para>Description:<itemizedlist>
1808 <para>This preference controls whether a tab will show on the detail page in the
1809 staff client that includes detailed acquisitions information for the title. This
1810 tab will include links to order information stored in the acquisitions module.<screenshot>
1811 <screeninfo>AcquisitionDetails</screeninfo>
1814 <imagedata fileref="images/admin/globalprefs/AcquisitionDetails.png"/>
1817 </screenshot></para>
1819 </itemizedlist></para>
1822 <section id="authoritysep">
1823 <title><link linkend="authoritysep">AuthoritySeparator</link></title>
1825 <para>Default: --</para>
1827 <para>Asks: Separate multiple displayed authors, series or
1828 subjects with ___.</para>
1831 <section id="hide_marc">
1832 <title><link linkend="hide_marc">hide_marc</link></title>
1834 <para>Default: Display</para>
1836 <para>Asks: ___ MARC tag numbers, subfield codes and indicators in
1839 <para>Values:</para>
1843 <para>Display -- shows the tag numbers on the cataloging
1847 <screeninfo>MARC editor with tags showing</screeninfo>
1851 <imagedata fileref="images/admin/globalprefs/hide_marc-display.png"/>
1858 <para>Don't display -- shows just descriptive text when
1862 <screeninfo>MARC editor without tags showing</screeninfo>
1866 <imagedata fileref="images/admin/globalprefs/hide_marc-dont.png"/>
1874 <section id="IntranetBiblioDefaultView">
1875 <title><link linkend="IntranetBiblioDefaultView">IntranetBiblioDefaultView</link></title>
1877 <para>Default: ISBD form</para>
1879 <para>Asks: By default, display biblio records in ___</para>
1881 <para>Values:</para>
1885 <para>ISBD form -- displays records in the staff client in the
1886 old card catalog format</para>
1890 <para>See <link linkend="isbdpref">ISBD</link> preference
1891 for more information</para>
1897 <para>Labelled MARC form -- displays records in the staff
1898 client in MARC with text labels to explain the different
1903 <para>MARC form -- displays records in the staff client in
1908 <para>normal form -- visual display in the staff client (for
1909 the average person)</para>
1913 <para>Description:</para>
1917 <para>This setting determines the bibliographic record display
1918 when searching the catalog on the staff client. This setting
1919 does not affect the display in the OPAC which is changed using
1920 the <link linkend="BiblioDefaultView">BiblioDefaultView</link>
1921 preference under the OPAC preference tab. This setting changes
1922 the look of the record when first displayed. The MARC and ISBD
1923 views can still be seen by clicking in the sidebar.</para>
1928 <section id="isbdpref">
1929 <title><link linkend="isbdpref">ISBD</link></title>
1931 <para>Default: <link linkend="isbddefault">MARC21 Default
1932 Appendix</link> or <link linkend="unimarcdefault">UNIMARC Default
1933 Appendix</link></para>
1935 <para>Asks: Use the following as the ISBD template:</para>
1937 <para>Description:</para>
1941 <para>This determines how the ISBD information will display in the staff client.
1942 Elements in the list can be reordered to produce a different ISBD view. ISBD, the
1943 International Standard Bibliographic Description, was first introduced by IFLA
1944 (International Federation of Library Associations) in 1969 in order to provide
1945 guidelines for descriptive cataloging. The purpose of ISBD is to aid the
1946 international exchange of bibliographic records for a variety of materials.</para>
1951 <section id="LabelMARCView">
1952 <title><link linkend="LabelMARCView">LabelMARCView</link></title>
1954 <para>Default: Don't</para>
1956 <para>Asks: ___ collapse repeated tags of the same type into one
1959 <para>Values:</para>
1963 <para>Do -- will combine all identical tag numbers under one
1964 heading in the MARC view in the OPAC and Staff Client</para>
1967 <screeninfo>MARC View in the Staff Client with LabelMARCView
1968 set to Do</screeninfo>
1972 <imagedata fileref="images/admin/globalprefs/LabelMARCView-do.png"/>
1979 <para>Don't -- will list all of the tags individually in the
1980 MARC view in the OPAC and Staff Client</para>
1983 <screeninfo>MARC View in the Staff Client with LabelMARCView
1984 set to Don't</screeninfo>
1988 <imagedata fileref="images/admin/globalprefs/LabelMARCView-dont.png"/>
1995 <section id="MergeReportFields">
1996 <title><link linkend="MergeReportFields">MergeReportFields</link></title>
1997 <para>Asks: ___ fields to display for deleted records after merge </para>
1998 <para>Description:<itemizedlist>
2000 <para>When merging records together you can receive a report of the merge process
2001 once it's done, this preference lets you set the default values for this
2004 </itemizedlist></para>
2005 <para>Example: '001,245ab,600' displays: <itemizedlist>
2007 <para>value of 001</para>
2010 <para>subfields a and b of fields 245</para>
2013 <para>all subfields of fields 600</para>
2015 </itemizedlist></para>
2017 <section id="NotesBlacklist">
2018 <title><link linkend="NotesBlacklist">NotesBlacklist</link></title>
2019 <para>Asks: Don't show these ___ note fields in title notes separator (OPAC record
2020 details) and in the description separator (Staff client record details). </para>
2021 <para>Description:<itemizedlist>
2023 <para>This preference lets you define which of your note fields are hidden from
2024 the title notes (OPAC) and descriptions (Staff) tabs. Enter the values as a
2025 comma separated list. For example to hide the local note and the bibliography
2026 note in MARC21 enter 504, 590.</para>
2028 </itemizedlist></para>
2031 <section id="OpacSuppression">
2032 <title><link linkend="OpacSuppression">OpacSuppression, OpacSuppressionByIPRange, OpacSuppressionRedirect, and
2033 OpacSuppressionMessage</link></title>
2034 <para>OpacSuppression Default: Don't hide</para>
2036 <para>Asks: ___ items marked as suppressed from OPAC search results. Note that you must
2037 have the Suppress index set up in Zebra and at least one suppressed item, or your
2038 searches will be broken. Restrict the suppression to IP adresses outside of the IP
2039 range ___ (Leave blank if not used. Define a range like 192.168..) Redirect the opac
2040 detail page for suppressed records to ___ Display the following message on the
2041 redirect page for suppressed biblios ___.</para>
2043 <para>OpacSuppression Values:</para>
2047 <para>Don't hide</para>
2051 <para>Will show records in OPAC search results if they are marked
2062 <para>Will not show records in OPAC search results if they're marked as
2068 <para>OpacSuppressionRedirect Values:<itemizedlist>
2070 <para>an explanatory page ('This record is blocked').</para>
2073 <para>the 404 error page ('Not found').</para>
2075 </itemizedlist></para>
2077 <para>Description:</para>
2081 <para>These preferences control hiding of bibliographic records from display in the
2082 OPAC. Each bibliogrphic record you want to hide from the OPAC simply needs to have
2083 the value "1" in the field mapped with Suppress index (942$n field in MARC21, no
2084 official field in UNIMARC). The indexer then hides it from display in OPAC but
2085 will still display it in the Staff Client. If you want to further control
2086 suppression you can set an IP address range to still show suppressed items to.
2087 Define a range like 192.168.. If you don't want to limit suppression in this way,
2088 leave the IP field blank. You can also decide what the patrons will see in the
2089 OPAC when a title is suppressed by setting the OpacSuppressionRedirect and
2090 OpacSuppressionMessage preferences. You can either show the patron a 404 page if
2091 they try to see a suppressed record or you can create a custom page by entering
2092 the HTML in the OpacSuppressionMessage part of this preference.</para>
2095 <para>An <link linkend="authorizedvalues">authorized value</link> for the MARC21
2096 942$n field (or the equivalent UNIMARC field) should be set to eliminate
2097 errors. One example would be to create an authorized value titled SUPPRESS
2098 with a value of 0 for don't suppress and 1 for suppress.</para>
2105 <para>If this preference is set to 'hide' and you have the 942n
2106 field set to 1, it will hide the entire bib record - not just an
2107 individual item.</para>
2111 <para>You must have the Suppress index set up in Zebra and at least one record with
2112 the value "1" in the field mapped with this index, or your searches will be
2113 completely broken in OPAC (you won't get any results at all).</para>
2116 <para>Suppressed records will show a note in the staff client indicating that they are
2117 suppressed from view in the OPAC.<screenshot>
2118 <screeninfo>Suppressed in Staff</screeninfo>
2121 <imagedata fileref="images/admin/globalprefs/suppressedstaff.png"/>
2124 </screenshot></para>
2125 <para>This note can be styled by using the <link linkend="IntranetUserCSS"
2126 >IntranetUserCSS</link> preference to stand out more if you'd like.<screenshot>
2127 <screeninfo>Style suppression note</screeninfo>
2130 <imagedata fileref="images/admin/globalprefs/suppressedstyled.png"/>
2133 </screenshot></para>
2136 <section id="SeparateHoldings">
2137 <title><link linkend="SeparateHoldings">SeparateHoldings & SeparateHoldingsBranch </link></title>
2138 <para>SeparateHoldings default: Don't separate</para>
2139 <para>SeparateHoldingsBranch default: home library </para>
2140 <para>Asks: ___ items display into two tabs, where the first tab contains items whose
2141 ___ is the logged in user's library. The second tab will contain all other items. </para>
2142 <para>SeparateHoldings values:<itemizedlist>
2144 <para>Don't separate</para>
2147 <para>Separate</para>
2149 </itemizedlist></para>
2150 <para>SeparateHoldingsBranch values:<itemizedlist>
2152 <para>holding library</para>
2155 <para>home library</para>
2157 </itemizedlist></para>
2158 <para>Description:</para>
2161 <para>This preference lets you decide if you would like to have the holding
2162 information on the bibliographic detail page in the staff client split in to
2163 multiple tabs. The default is to show all holdings on one tab.</para>
2165 <screeninfo>Separate holdings tabs</screeninfo>
2168 <imagedata fileref="images/admin/globalprefs/SeparateHoldings.png"/>
2176 <section id="URLLinkText">
2177 <title><link linkend="URLLinkText">URLLinkText</link></title>
2179 <para>Default: Online Resource</para>
2181 <para>Asks: Show ___ as the text of links embedded in MARC
2184 <para>Description:</para>
2188 <para>If the 856 field does not have a subfield 3 or y
2189 defined, the OPAC will say 'Click here to access online.' If
2190 you would like the field to say something else enter that in
2196 <section id="UseControlNumber">
2197 <title><link linkend="UseControlNumber">UseControlNumber</link></title>
2199 <para>Default: Don't use</para>
2201 <para>Asks: ___ record control number ($w subfields) and control
2202 number (001) for linking of bibliographic records.</para>
2204 <para>Values:</para>
2208 <para>Don't use</para>
2212 <para>When clicking on links to titles that appear next to
2213 'Continues' and 'Continued by' in the detail display Koha
2214 will perform a title search</para>
2224 <para>When clicking on links to titles that appear next to
2225 'Continues' and 'Continued by' in the detail display Koha
2226 will perform a control number (MARC field 001)
2234 <para>Unless you are going in and manually changing 773$w to
2235 match your rigorously-defined bibliographic relationships, you
2236 should set this preference to "Don't use" and instead set <link linkend="EasyAnalyticalRecords">EasyAnalyticalRecords</link> to
2240 <para>Description:</para>
2244 <para>If you have a serial called "Journal of Interesting
2245 Things" which has a separate record from when it was called
2246 "Transactions of the Interesting Stuff Society," you could add
2247 linking fields to indicate the relationship between the two
2248 records. UseControlNumber allows you to use your local
2249 accession numbers for those links. In MARC21, the relevant
2250 sections of the two records might look like
2251 this:<programlisting> =001 12345
2252 =110 2_$aInteresting Stuff Society.
2253 =245 10$aTransactions of the Interesting Stuff Society.
2254 =785 00$aInteresting Stuff Society$tJournal of Interesting Things.$w12346
2257 =110 2_$aInteresting Stuff Society.
2258 =245 10$aJournal of Interesting Things.
2259 =780 00$aInteresting Stuff Society$tTransactions of the Interesting Stuff Society.$w12345</programlisting></para>
2261 <para>With UseControlNumber set to 'Use', the 78x links will
2262 use the Control Numbers is subfield $w, instead of doing a
2263 title search on "Journal of Interesting Things" and
2264 "Transactions of the Interesting Stuff Society"
2265 respectively.</para>
2270 <section id="catexportprefs">
2271 <title><link linkend="catexportprefs">Exporting</link></title>
2272 <section id="BibtexExportAdditionalFields">
2273 <title><link linkend="BibtexExportAdditionalFields">BibtexExportAdditionalFields</link></title>
2274 <para>Asks: Include following fields when exporting BibTeX</para>
2275 <para>Description: <itemizedlist>
2277 <para>Use one line per tag in the format BT_TAG: TAG$SUBFIELD ( e.g. lccn: 010$a )
2281 <para>To specificy multiple marc tags/subfields as targets for a repeating BibTex
2282 tag, use the following format: BT_TAG: [TAG2$SUBFIELD1, TAG2$SUBFIELD2] ( e.g.
2283 notes: [501$a, 505$g] )</para>
2286 <para>All values of repeating tags and subfields will be printed with the given
2290 <para>Use '@' ( with quotes ) as the BT_TAG to replace the bibtex record type with
2291 a field value of your choosing. </para>
2293 </itemizedlist></para>
2295 <section id="RisExportAdditionalFields">
2296 <title><link linkend="RisExportAdditionalFields">RisExportAdditionalFields</link></title>
2297 <para>Asks: Include following fields when exporting RIS</para>
2298 <para>Description: <itemizedlist>
2300 <para>Use one line per tag in the format RIS_TAG: TAG$SUBFIELD ( e.g. LC: 010$a )
2304 <para>To specificy multiple marc tags/subfields as targets for a repeating RIS
2305 tag, use the following format: RIS_TAG: [TAG2$SUBFIELD1, TAG2$SUBFIELD2] ( e.g.
2306 NT: [501$a, 505$g] ) </para>
2309 <para>All values of repeating tags and subfields will be printed with the given
2313 <para>Use of TY ( record type ) as a key will <emphasis role="italic">replace</emphasis> the default TY with the field value of your choosing.
2316 </itemizedlist></para>
2319 <section id="catimportprefs">
2320 <title><link linkend="catimportprefs">Importing</link></title>
2321 <section id="AggressiveMatchOnISBN">
2322 <title><link linkend="AggressiveMatchOnISBN">AggressiveMatchOnISBN</link></title>
2323 <para>Default: don't</para>
2324 <para>Asks: When matching on ISBN with the record import tool, ___ attempt to match
2325 aggressively by trying all variations of the ISBNs in the imported record as a phrase
2326 in the ISBN fields of already cataloged records. </para>
2327 <para>Values:<itemizedlist>
2334 </itemizedlist>Description:<itemizedlist>
2336 <para>This preference allows you to choose to alter the ISBN matching rule used
2337 when staging records for import to be more aggressive. This means that all text
2338 will be stripped from the ISBN field so that a pure number match is possible. If
2339 this preference is set to "Don't" then Koha will find a match only if the ISBN
2340 fields are identical.</para>
2342 </itemizedlist><important>
2343 <para>Note that this preference has no effect if <link linkend="UseQueryParser">UseQueryParser</link> is on. </para>
2348 <section id="catinterfaceprefs">
2349 <title><link linkend="catinterfaceprefs">Interface</link></title>
2353 <section id="advancedMARCeditor">
2354 <title><link linkend="advancedMARCeditor">advancedMARCeditor</link></title>
2356 <para>Default: Don't display</para>
2358 <para>Asks: ___ descriptions of fields and subfields in the MARC
2361 <para>Description:</para>
2365 <para>This preference determines whether or not MARC field
2366 names will be present when editing or creating MARC
2371 <para>Values:</para>
2375 <para>Display</para>
2378 <screeninfo>MARC editor with text labels</screeninfo>
2382 <imagedata fileref="images/admin/globalprefs/advancedMARCeditor-display.png"/>
2389 <para>Don't display</para>
2392 <screeninfo>MARC editor without text labels</screeninfo>
2396 <imagedata fileref="images/admin/globalprefs/advancedMARCeditor-dontdisplay.png"/>
2404 <section id="DefaultClassificationSource">
2405 <title><link linkend="DefaultClassificationSource">DefaultClassificationSource</link></title>
2407 <para>Default: Dewey Decimal System</para>
2409 <para>Asks: Use ___ as the default classification source.</para>
2411 <para>Values:</para>
2415 <para>ANSCR (Sound Recordings)</para>
2419 <para>Dewey Decimal Classification</para>
2423 <para>Library of Congress Classification</para>
2427 <para>Other/Generic Classification Scheme</para>
2431 <para>SuDoc Classification (U.S. GPO)</para>
2435 <para>Universal Decimal Classification</para>
2440 <section id="EasyAnalyticalRecords">
2444 <firstname>Linda</firstname>
2445 <surname>Culberson</surname>
2447 <orgname>Ms. Dept. of Archives and History</orgname>
2452 <firstname>Nicole C.</firstname>
2453 <surname>Engard</surname>
2454 <contrib>Fixed typos, changed content
2455 where necessary and added new screenshots.</contrib>
2459 <pubdate>October 2011</pubdate>
2462 <title><link linkend="EasyAnalyticalRecords">EasyAnalyticalRecords</link></title>
2463 <para>Default: Don't Display</para>
2465 <para>Asks: ___ easy ways to create analytical record
2466 relationships</para>
2468 <para>Values:</para>
2472 <para>Display</para>
2476 <para>Don't Display</para>
2481 <para>If you decide to use this feature you'll want to make sure
2482 that your <link linkend="UseControlNumber">UseControlNumber</link> preference is
2483 set to "Don't use" or else the "Show analytics" links in the
2484 staff client and the OPAC will be broken.</para>
2487 <para>Description:</para>
2491 <para>An analytic entry in a catalog is one that describes a
2492 part of a larger work that is also described in the catalog.
2493 In bibliographic cataloging, analytic entries may be made for
2494 chapters in books or special issues of articles in
2495 periodicals. In archival cataloging, analytic entries may be
2496 made for series or items within a collection. This feature in
2497 Koha allows for an easy way of linking analytic entries to the
2498 host records, and this system preference adds several new menu
2499 options to the staff cataloging detail pages to allow that to
2506 <section id="catrecordprefs">
2507 <title><link linkend="catrecordprefs">Record Structure</link></title>
2511 <section id="AlternateHoldingsField">
2512 <title><link linkend="AlternateHoldingsField">AlternateHoldingsField &
2513 AlternateHoldingsSeparator</link></title>
2515 <para>Asks: Display MARC subfield ___ as holdings information for
2516 records that do not have items, with the subfields separated by
2519 <para>Description:</para>
2523 <para>Sometimes libraries migrate to Koha with their holding
2524 info in the 852 field (OCLC holdings information field) and
2525 choose not to transfer that information into the 952 (Koha
2526 holdings information field) because they don't plan on
2527 circulating those items. For those libraries or other
2528 libraries that have data in the 852 fields of their records
2529 that they want to display, these preferences let you choose to
2530 display holdings info from a field other than the 952 field.
2531 The AlternateHoldingsField preference can contain multiple
2532 subfields to look in; for instance 852abhi would look in 852
2533 subfields a, b, h, and i.</para>
2537 <para>With AlternateHoldingsField set to 852abhi and
2538 AlternateHoldingsSeparator set to a space the holdings would
2539 look like the following:</para>
2542 <screeninfo>Alternate Holdings Display</screeninfo>
2546 <imagedata fileref="images/admin/globalprefs/AlternateHoldingsField.png"/>
2554 <section id="autoBarcode">
2555 <title><link linkend="autoBarcode">autoBarcode</link></title>
2557 <para>Default: generated in the form
2558 <branchcode>yymm0001</para>
2560 <para>Asks: Barcodes are ___</para>
2562 <para>Values:</para>
2566 <para>generated in the form <branchcode>yymm0001</para>
2570 <para>generated in the form <year>-0001, <year>-0002</para>
2574 <para>generated in the form 1, 2, 3</para>
2578 <para>incremental EAN-13 barcodes</para>
2582 <para>not generated automatically</para>
2586 <para>Description:</para>
2590 <para>This setting is for libraries wishing to generate
2591 barcodes from within Koha (as opposed to scanning in
2592 pre-printed barcodes or manually assigning them). The default
2593 behavior makes it so that when you click in the barcode field
2594 (952$p in MARC21) it will populate with the automatic barcode
2595 you have chosen. If you would rather it only enter an
2596 automatic barcode when you click on the plugin (the ... to the
2597 right of the field) you can change the plugin used for that
2598 field in the framework. Set the plugin for 952$p (if using
2599 MARC21 or equivalent field mapped to items.barcode in your
2600 local MARC format) for your frameworks to barcode_manual.pl
2601 instead of barcode.pl. Learn more about editing frameworks
2602 under the <link linkend="marcbibframeworks">MARC Bibliographic
2603 Frameworks</link> section of this manual.</para>
2608 <section id="DefaultLanguageField008">
2609 <title><link linkend="DefaultLanguageField008">DefaultLanguageField008</link></title>
2610 <para>Default: Empty defaults to eng</para>
2612 <para>Asks: Fill in the default language for field 008 Range 35-37 of MARC21 records
2615 <para>Description:</para>
2619 <para>This preference will allow you to set the language for your MARC21 008 field
2620 by default. If this is left empty it will default to English (eng). See the <ulink url="http://www.loc.gov/marc/languages/language_code.html">MARC Code List for
2621 Languages</ulink> for additional values for this preference.</para>
2625 <para>This preference won't have any effect if your records are in UNIMARC.</para>
2629 <section id="item-level_itypes">
2630 <title><link linkend="item-level_itypes">item-level_itypes</link></title>
2632 <para>Default: specific item</para>
2634 <para>Asks: Use the item type of the ___ as the authoritative item
2635 type (for determining circulation and fines rules, etc).</para>
2637 <para>Values:</para>
2641 <para>biblio record</para>
2645 <para>specific item</para>
2649 <para>Description:</para>
2653 <para>This preference determines whether the item type Koha
2654 uses for issuing rules will be an attribute of the
2655 bibliographic record or the item record. Most libraries refer
2656 to the item record for item types. It also determines if the
2657 item type icon appears on the OPAC search results. If you have
2658 the preference set to 'biblio record' then Koha displays the
2659 item type icon on the search results to the left of the result
2663 <screeninfo>Item Type Icons to the Left of Result
2664 Information</screeninfo>
2668 <imagedata fileref="images/admin/globalprefs/item-level_itypes.png"/>
2676 <section id="itemcallnumber">
2677 <title><link linkend="itemcallnumber">itemcallnumber</link></title>
2679 <para>Default: 082ab</para>
2681 <para>Asks: Map the MARC subfield to an item's callnumber.</para>
2684 <para>This can contain multiple subfields to look in; for
2685 instance 082ab would look in 082 subfields a and b.</para>
2688 <para>Description:</para>
2692 <para>This setting determines which MARC field will be used to determine the call
2693 number that will be entered into item records automatically (952$o). The value is
2694 set by providing the MARC field code (050, 082, 090, 852 are all common in MARC21)
2695 and the subfield codes without the delimiters ($a, $b would be ab).</para>
2699 <para>Examples:</para>
2703 <para>Dewey: 082ab or 092ab; LOC: 050ab or 090ab; from the
2704 item record: 852hi</para>
2709 <section id="marcflavour">
2710 <title><link linkend="marcflavour">marcflavour</link></title>
2712 <para>Default: MARC21</para>
2714 <para>Asks: Interpret and store MARC records in the ___
2717 <para>Values:</para>
2721 <para>MARC21<itemizedlist>
2723 <para>The standard style for the US, Canada, Australia, New Zealand, United
2724 Kingdom, Germany and other countries</para>
2726 </itemizedlist></para>
2730 <para>UNIMARC<itemizedlist>
2732 <para>The standard style used in France, Italy, Portugal, Russia, and other
2735 </itemizedlist></para>
2738 <para>NORMARC<itemizedlist>
2740 <para>The standard style for Norway</para>
2742 </itemizedlist></para>
2745 <para>Description:</para>
2748 <para>This preference defines global MARC style (MARC21, UNIMARC or NORMARC) used
2749 for encoding.</para>
2753 <para>Changing the value of this preference will not convert your records from one
2754 MARC style to an other.</para>
2758 <section id="MARCOrgCode">
2759 <title><link linkend="MARCOrgCode">MARCOrgCode</link></title>
2761 <para>Default: OSt</para>
2763 <para>Asks: Fill in the MARC organization code ___ by default in new MARC21 records
2764 (leave blank to disable). </para>
2766 <para>Description:</para>
2770 <para>The MARC Organization Code is used to identify libraries
2771 with holdings of titles and more.</para>
2775 <para>Learn more and find your library's MARC21 code on the <ulink url="http://www.loc.gov/marc/organizations/orgshome.html">MARC Code list for
2776 Organizations</ulink> or in Canada on the <ulink url="http://www.collectionscanada.gc.ca/illcandir-bin/illsear/l=0/c=1">Canadian
2777 Symbols Directory</ulink>.<note>
2778 <para>This preference won't have any effect if your records are in UNIMARC.</para>
2782 <section id="NewItemsDefaultLocation">
2783 <title><link linkend="NewItemsDefaultLocation">NewItemsDefaultLocation</link></title>
2785 <para>Asks: When items are created, give them the temporary
2786 location of ___ (should be a location code, or blank to
2789 <section id="PrefillItem">
2790 <title><link linkend="PrefillItem">PrefillItem</link></title>
2791 <para>Default: the new item is not prefilled with last created item values.</para>
2792 <para>Asks: When a new item is added ___</para>
2793 <para>Values:<itemizedlist>
2795 <para>the new item is not prefilled with last created item values.</para>
2798 <para>the new item is prefilled with last created item values.</para>
2800 </itemizedlist></para>
2801 <para>Description:<itemizedlist>
2803 <para>This preference controls the behavior used when adding new items. Using the
2804 options here you can choose to have your next new item prefill with the values
2805 used in the last item was added to save time typing values or to have the item
2806 form appear completely blank. Using <link linkend="SubfieldsToUseWhenPrefill">SubfieldsToUseWhenPrefill</link> you can control specifically which fields
2807 are prefilled.</para>
2809 </itemizedlist></para>
2811 <section id="SubfieldsToAllowForRestrictedBatchmod">
2812 <title><link linkend="SubfieldsToAllowForRestrictedBatchmod">SubfieldsToAllowForRestrictedBatchmod</link></title>
2813 <para>Asks: Define a list of subfields for which editing is authorized when <link linkend="items_batchmod_restricted">items_batchmod_restricted</link> permission is
2814 enabled, separated by spaces. ___</para>
2815 <para>Examples:<itemizedlist>
2817 <para>UNIMARC: "995$f 995$h 995$j" </para>
2820 <para>MARC21: "952$a 952$b 952$c" </para>
2822 </itemizedlist></para>
2823 <para>Description:<itemizedlist>
2825 <para>This preference lets you define what fields can be edited via the <link linkend="batchmodifyitems">batch item modification tool</link> if the
2826 items_batchmod_restricted permission is enabled.</para>
2829 <para>The FA framework is excluded from the permission. If the pref is empty,
2830 no fields are restricted. </para>
2834 </itemizedlist></para>
2836 <section id="SubfieldsToAllowForRestrictedEditing">
2837 <title><link linkend="SubfieldsToAllowForRestrictedEditing">SubfieldsToAllowForRestrictedEditing</link></title>
2838 <para>Asks: Define a list of subfields for which editing is authorized when
2839 edit_items_restricted permission is enabled, separated by spaces. ___</para>
2840 <para>Examples:<itemizedlist>
2842 <para>UNIMARC: "995$f 995$h 995$j"</para>
2845 <para>MARC21: "952$a 952$b 952$c"</para>
2847 </itemizedlist></para>
2848 <para>Description:<itemizedlist>
2850 <para>This preference lets you define what fields can be edited via cataloging if
2851 the <link linkend="edit_items_restricted">edit_items_restricted</link>
2852 permission is enabled<note>
2853 <para>The Fast Add (FA) framework is excluded from the permission. If the pref
2854 is empty, no fields are restricted. </para>
2857 </itemizedlist></para>
2859 <section id="SubfieldsToUseWhenPrefill">
2860 <title><link linkend="SubfieldsToUseWhenPrefill">SubfieldsToUseWhenPrefill</link></title>
2861 <para>Asks: Define a list of subfields to use when prefilling items ___<important>
2862 <para>Separate values with a space.</para>
2864 <para>Description:<itemizedlist>
2866 <para>When the <link linkend="PrefillItem">PrefillItem</link> preference is set to
2867 prefill item values with those from the last added item, this preference can
2868 control which fields are prefilled (and which are not). Enter a space separated
2869 list of fields that you would like to prefill when adding a new item.</para>
2871 </itemizedlist></para>
2874 <section id="z3950NormalizeAuthor">
2875 <title><link linkend="z3950NormalizeAuthor">z3950NormalizeAuthor & z3950AuthorAuthFields</link></title>
2877 <para>Defaults: Don't copy & 701,702,700</para>
2879 <para>Asks: ___ authors from the UNIMARC ___ tags (separated by
2880 commas) to the correct author tags when importing a record using
2883 <para>Description for z3950NormalizeAuthor:</para>
2887 <para>This preference allows for 'Personal Name Authorities'
2888 to replace authors as the bibliographic authority. This
2889 preference should only be considered by libraries using
2894 <para>Values for z3950NormalizeAuthor:</para>
2902 <para>Don't copy</para>
2906 <para>Description for z3950AuthorAuthFields:</para>
2910 <para>This preference defines which MARC fields will be used
2911 for 'Personal Name Authorities' to replace authors as the
2912 bibliographic authorities. This preference only applies to
2913 those using UNIMARC encoding. The MARC fields selected here
2914 will only be used if 'z3950NormalizeAuthor' is set to "Copy".
2915 The default field are 700, 701, and 702.</para>
2921 <section id="catspineprefs">
2922 <title><link linkend="catspineprefs">Spine Labels</link></title>
2926 <section id="SpineLabelAutoPrint">
2927 <title><link linkend="SpineLabelAutoPrint">SpineLabelAutoPrint</link></title>
2929 <para>Default: don't</para>
2931 <para>Asks: When using the quick spine label printer, ___
2932 automatically pop up a print dialog.</para>
2934 <para>Values:</para>
2947 <section id="SpineLabelFormat">
2948 <title><link linkend="SpineLabelFormat">SpineLabelFormat</link></title>
2950 <para>Default: <itemcallnumber><copynumber></para>
2952 <para>Asks: Include the following fields on a quick-printed spine
2953 label: (Enter in columns from the biblio, biblioitems or items
2954 tables, surrounded by < and >.)</para>
2957 <section id="SpineLabelShowPrintOnBibDetails">
2958 <title><link linkend="SpineLabelShowPrintOnBibDetails">SpineLabelShowPrintOnBibDetails</link></title>
2960 <para>Default: Don't display</para>
2962 <para>Asks: ___ buttons on the bib details page to print item
2963 spine labels.</para>
2965 <para>Values:</para>
2969 <para>Display</para>
2972 <screeninfo>'Print Label' link appears on bibliographic
2973 record in the staff client</screeninfo>
2977 <imagedata fileref="images/admin/globalprefs/SpineLabelShowPrintOnBibDetails.png"/>
2984 <para>Don't display</para>
2991 <section id="circprefs">
2992 <title><link linkend="circprefs">Circulation</link></title>
2994 <para><emphasis>Get there:</emphasis> More > Administration >
2995 Global System Preferences > Circulation</para>
2996 <section id="batchcheckoutprefs">
2997 <title><link linkend="batchcheckoutprefs">Batch Checkout</link></title>
2998 <section id="BatchCheckouts">
2999 <title><link linkend="BatchCheckouts">BatchCheckouts</link></title>
3000 <para>Default: Don't allow</para>
3001 <para>Asks: ___ batch checkouts </para>
3002 <para>Values:<itemizedlist>
3007 <para>Don't allow</para>
3009 </itemizedlist></para>
3011 <section id="BatchCheckoutsValidCategories">
3012 <title><link linkend="BatchCheckoutsValidCategories">BatchCheckoutsValidCategories</link></title>
3013 <para>Asks: Patron categories allowed to checkout in a batch ___ (list of patron
3014 categories separated with a pipe '|') </para>
3017 <section id="checkinpolicyprefs">
3018 <title><link linkend="checkinpolicyprefs">Checkin Policy</link></title>
3020 <section id="AllowMultipleIssuesOnABiblio">
3021 <title><link linkend="AllowMultipleIssuesOnABiblio">AllowMultipleIssuesOnABiblio</link></title>
3022 <para>Default: Allow</para>
3023 <para>Asks: ___ patrons to check out multiple items from the same record. </para>
3024 <para>Values:<itemizedlist>
3029 <para>Don't allow</para>
3031 </itemizedlist></para>
3032 <para>Description:<itemizedlist>
3034 <para>If this preference is set to 'Allow' then patrons will be able to check out
3035 multiple copies of the same title at the same time. If it's set to "Don't allow"
3036 then patrons will only be allowed to check out one item attached to a record at
3037 a time. Regardless of the option chosen in this preference records with
3038 subscriptions attached will allow multiple check outs.<important>
3039 <para>This will only effect records without a subscription attached.</para>
3042 </itemizedlist></para>
3044 <section id="BlockReturnOfWithdrawnItems">
3045 <title><link linkend="BlockReturnOfWithdrawnItems">BlockReturnOfWithdrawnItems</link></title>
3046 <para>Default: Block</para>
3047 <para>Asks: ___ returning of items that have been withdrawn. </para>
3048 <para>Values:<itemizedlist>
3053 <para>Don't block</para>
3055 </itemizedlist>Description:<itemizedlist>
3057 <para>This preference controls whether and item with a withdrawn status (952$0 in
3058 MARC21) can be checked in or not.</para>
3060 </itemizedlist></para>
3062 <section id="CalculateFinesOnReturn">
3063 <title><link linkend="CalculateFinesOnReturn">CalculateFinesOnReturn</link></title>
3064 <para>Default: Do</para>
3065 <para>Asks: ___ calculate and update overdue charges when an item is returned.</para>
3066 <para>Values:<itemizedlist>
3073 </itemizedlist></para>
3074 <para>Description:<itemizedlist>
3076 <para>If this preference is set to "Do" and the <link linkend="finescronjob">fines
3077 cron job</link> is off then Koha will calculate fines only when items are
3078 returned. If you have the fines cron job on and this preference set to "Do" then
3079 this preference will calculate fines based on the cron (usually run nightly) and
3080 then again when you check the item in. This option is best for those who are
3081 doing hourly loans. If this preference is set to "Don't" then fines will only
3082 be accrued if the fines cron job is running.</para>
3084 </itemizedlist></para>
3087 <para>If you are doing hourly loans then you should have this set to 'Do'.</para>
3091 <section id="RentalFeesCheckoutConfirmation">
3092 <title><link linkend="RentalFeesCheckoutConfirmation">RentalFeesCheckoutConfirmation</link></title>
3093 <para>Default: do not ask</para>
3094 <para>Asks: When checking out an item with rental fees, ___ for confirmation.</para>
3095 <para>Values:<itemizedlist>
3097 <para>ask<screenshot>
3098 <screeninfo>RentalFeesCheckoutConfirmation</screeninfo>
3101 <imagedata fileref="images/admin/globalprefs/RentalFeesCheckoutConfirmation.png"/>
3104 </screenshot></para>
3107 <para>do not ask</para>
3109 </itemizedlist></para>
3110 <para>Description:<itemizedlist>
3112 <para>If you are charging rental fees for items this preference will make it so
3113 that you can show (or not show) a confirmation before checking out an item that
3114 will incur a rental charge.</para>
3116 </itemizedlist></para>
3118 <section id="UpdateNotForLoanStatusOnCheckin">
3119 <title><link linkend="UpdateNotForLoanStatusOnCheckin">UpdateNotForLoanStatusOnCheckin</link></title>
3120 <para>Asks: This is a list of value pairs. When an item is checked in, if the not for
3121 loan value on the left matches the items not for loan value it will be updated to the
3122 right-hand value. E.g. '-1: 0' will cause an item that was set to 'Ordered' to now be
3123 available for loan. Each pair of values should be on a separate line. </para>
3127 <section id="circcheckoutpolicy">
3128 <title><link linkend="circcheckoutpolicy">Checkout Policy</link></title>
3132 <section id="AgeRestrictionMarker">
3133 <title><link linkend="AgeRestrictionMarker">AgeRestrictionMarker</link></title>
3135 <para>Asks: Restrict patrons with the following target audience
3136 values from checking out inappropriate materials: ___</para>
3138 <para>Description:</para>
3142 <para>This preference defines certain keywords that will
3143 trigger Koha to restrict checkout based on age. These
3144 restrictions can be overridden by the <link linkend="AgeRestrictionOverride">AgeRestrictionOverride</link>
3145 preference. Enter in this field a series of keywords separated
3146 by bar (|) with no spaces. For example PG|R|E|EC|Age| will
3147 look for PG followed by an age number, R folllowed by an age
3148 number, Age followed by an age number, and so on. These values
3149 can appear in any MARC field, but Library of Congress
3150 recommends the 521$a (Target Audience Note). Whatever field
3151 you decide to use you must map the word agerestriction in the
3152 biblioitems table to that field in the <link linkend="kohamarcmapping">Koha to MARC Mapping</link>. When
3153 cataloging you can enter values like PG 13 or E 10 in the
3154 521$a and Koha will then notify circulation librarians that
3155 the material may not be recommended for the patron based on
3156 their age.<important>
3157 <para>You must map the word agerestriction in the biblioitems table to the MARC
3158 field where this information will appear via the <link linkend="kohamarcmapping">Koha to MARC Mapping</link> administration
3165 <section id="AgeRestrictionOverride">
3166 <title><link linkend="AgeRestrictionOverride">AgeRestrictionOverride</link></title>
3168 <para>Default: Don't allow</para>
3170 <para>Asks: ___ staff to check out an item with age
3173 <para>Values:</para>
3180 <screeninfo>Allow age restriction override</screeninfo>
3184 <imagedata fileref="images/admin/globalprefs/AgeRestrictionOverride.png"/>
3191 <para>Don't allow</para>
3194 <screeninfo>Don't allow age restriction
3195 override</screeninfo>
3199 <imagedata fileref="images/admin/globalprefs/AgeRestrictionMarker.png"/>
3206 <para>Description:</para>
3210 <para>When the <link linkend="AgeRestrictionMarker">AgeRestrictionMarker</link>
3211 preference is set, Koha will try to warn circulation
3212 librarians before checking out an item that might have an age
3213 restriction listed in the MARC record. This preference asks if
3214 you would like the staff to be able to still check out these
3215 items to patrons under the age limit.</para>
3220 <section id="AllFinesNeedOverride">
3221 <title><link linkend="AllFinesNeedOverride">AllFinesNeedOverride</link></title>
3223 <para>Default: Require</para>
3225 <para>Asks: ___ staff to manually override all fines, even fines
3226 less than <link linkend="noissuescharge">noissuescharge</link>.</para>
3228 <para>Values:</para>
3232 <para>Don't require</para>
3236 <para>Require</para>
3240 <para>Description:</para>
3244 <para>This preference let's you decide if you want to always
3245 be warned that the patron has fines when checking out. If you
3246 have it set to 'Require' then no matter how much money the
3247 patron owes a message will pop up warning you that the patron
3253 <section id="AllowFineOverride">
3254 <title><link linkend="AllowFineOverride">AllowFineOverride</link></title>
3256 <para>Default: Don't allow</para>
3258 <para>Asks: ___ staff to manually override and check out items to
3259 patrons who have more than <link linkend="noissuescharge">noissuescharge</link> in fines.</para>
3261 <para>Values:</para>
3269 <para>Don't allow</para>
3273 <para>Description:</para>
3277 <para>This preference lets you decide if you staff can check
3278 out to patrons who owe more money than you usually let them
3279 carry on their account. If set to 'Allow' staff will be warned
3280 that the patrons owes money, but it won't stop the staff from
3281 checking out to the patron.</para>
3286 <section id="AllowItemsOnHoldCheckout">
3287 <title><link linkend="AllowItemsOnHoldCheckout">AllowItemsOnHoldCheckout</link></title>
3289 <para>Default: Don't allow</para>
3291 <para>Asks: ___ checkouts of items reserved to someone else. If
3292 allowed do not generate RESERVE_WAITING and RESERVED warning. This
3293 allows self checkouts for those items.</para>
3295 <para>Values:</para>
3303 <para>Don't allow</para>
3308 <para>This system preference relates only to SIP based self
3309 checkout, not Koha's web based self checkout.</para>
3312 <para>Description:</para>
3316 <para>When this preference is set to 'Allow' patrons will be
3317 able to use your external self check machine to check out a
3318 book to themselves even if it's on hold for someone else. If
3319 you would like Koha to prevent people from checking out books
3320 that are on hold for someone else set this preference to
3321 "Don't allow."</para>
3326 <section id="AllowNotForLoanOverride">
3327 <title><link linkend="AllowNotForLoanOverride">AllowNotForLoanOverride</link></title>
3329 <para>Default: Allow</para>
3331 <para>Asks: ___ staff to override and check out items that are
3332 marked as not for loan.</para>
3334 <para>Values:</para>
3342 <para>Don't allow</para>
3346 <para>Description:</para>
3350 <para>This parameter is a binary setting which controls the
3351 ability of staff (patrons will always be prevented from
3352 checking these items out) to check out items that are marked
3353 as "not for loan". Setting it to "Allow" would allow such
3354 items to be checked out, setting it to "Don't allow" would
3355 prevent this. This setting determines whether items meant to
3356 stay in the library, such as reference materials, and other
3357 library resources can be checked out by patrons.</para>
3362 <section id="AllowRenewalLimitOverride">
3363 <title><link linkend="AllowRenewalLimitOverride">AllowRenewalLimitOverride</link></title>
3365 <para>Default: Allow</para>
3367 <para>Asks: ___ staff to manually override the renewal limit and
3368 renew a checkout when it would go over the renewal limit.</para>
3370 <para>Values:</para>
3378 <para>Don't allow</para>
3382 <para>Description:</para>
3386 <para>This preference is a binary setting which controls the
3387 ability of staff to override the limits placed on the number
3388 of times an item can be renewed. Setting it to "Allow" would
3389 allow such limits to be overridden, setting it to "Don't
3390 allow" would prevent this. This is a preference in which if it
3391 is set to "allow" it would allow the library staff to use
3392 their judgment for overriding the renew limit for special
3393 cases, setting it to "Don't allow" prevents an opportunity for
3394 abuse by the library staff.</para>
3399 <section id="AllowReturnToBranch">
3400 <title><link linkend="AllowReturnToBranch">AllowReturnToBranch</link></title>
3402 <para>Default: to any library</para>
3404 <para>Asks: Allow materials to be returned to ___</para>
3406 <para>Values:</para>
3410 <para>either the library the item is from or the library it
3411 was checked out from.</para>
3415 <para>only the library the item is from.</para>
3419 <para>only the library the item was checked out from.</para>
3423 <para>to any library.</para>
3427 <para>Description:</para>
3431 <para>This preference lets the library system decide how they
3432 will accept returns. Some systems allow for items to be
3433 returned to any library in the system (the default value of
3434 this preference) others want to limit item returns to only
3435 specific branches. This preference will allow you to limit
3436 item returns (checkins) to the branch(es) set in the
3441 <section id="AllowTooManyOverride">
3442 <title><link linkend="AllowTooManyOverride">AllowTooManyOverride</link></title>
3443 <para>Default: Allow</para>
3444 <para>Asks: ___ staff to override and check out items when the patron has reached the
3445 maximum number of allowed checkouts.</para>
3446 <para>Values:</para>
3451 <screeninfo>Allow too many checkouts override</screeninfo>
3454 <imagedata fileref="images/admin/globalprefs/AllowTooManyOverride-yes.png"/>
3460 <para>Don't allow</para>
3462 <screeninfo>Don't allow too many checkouts override</screeninfo>
3465 <imagedata fileref="images/admin/globalprefs/AllowTooManyOverride-no.png"/>
3471 <para>Description:<itemizedlist>
3473 <para>If this preference is set to "Allow" then staff all will be presented with
3474 an option to checkout more items to a patron than are normally allowed in the
3475 <link linkend="circfinerules">Circulation and Fine Rules</link>. If this
3476 preference is set to "Don't allow" then no staff member will be able to check
3477 out more than the circulation limit.</para>
3479 </itemizedlist></para>
3482 <section id="AutomaticItemReturn">
3483 <title><link linkend="AutomaticItemReturn">AutomaticItemReturn</link></title>
3485 <para>Default: Do</para>
3487 <para>Asks: ___ automatically transfer items to their home branch
3488 when they are returned.</para>
3490 <para>Values:</para>
3502 <para>Description:</para>
3506 <para>This preference is a binary setting which determines
3507 whether an item is returned to its home branch automatically
3508 or not. If set to "Don't", the staff member checking an item
3509 in at a location other than the item's home branch will be
3510 asked whether the item will remain at the non-home branch (in
3511 which case the new location will be marked as a holding
3512 location) or returned. Setting it to "Do" will ensure that
3513 items checked in at a branch other than their home branch will
3514 be sent to that home branch.</para>
3518 <section id="AutoRemoveOverduesRestrictions">
3519 <title><link linkend="AutoRemoveOverduesRestrictions">AutoRemoveOverduesRestrictions</link></title>
3520 <para>Default: Do not</para>
3521 <para>Asks: ___ allow OVERDUES restrictions triggered by sent notices to be cleared
3522 automatically when all overdue items are returned by a patron. </para>
3523 <para>Values:<itemizedlist>
3530 </itemizedlist></para>
3531 <para>Description:<itemizedlist>
3533 <para>Using the <link linkend="noticetriggers">Overdue Notice/Status
3534 Triggers</link> you can restrict patrons after they receive an overdue notice.
3535 This preference lets you define whether Koha will automatically remove that
3536 restriction once the overdue items in question are returned or not.</para>
3538 </itemizedlist></para>
3541 <section id="CircControl">
3542 <title><link linkend="CircControl">CircControl</link></title>
3544 <para>Default: the library the item is from</para>
3546 <para>Asks: Use the checkout and fines rules of ___</para>
3548 <para>Values:</para>
3552 <para>the library the item is from</para>
3556 <para>The <link linkend="circfinerules">circulation and fines policies</link>
3557 will be determined by the item's library where <link linkend="HomeOrHoldingBranch">HomeOrHoldingBranch</link> chooses if item's
3558 home library is used or holding library is used.</para>
3564 <para>the library the patron is from</para>
3568 <para>The <link linkend="circfinerules">circulation and fines policies</link>
3569 will be determined the patron's home library</para>
3575 <para>the library you are logged in at</para>
3579 <para>The <link linkend="circfinerules">circulation and fines policies</link>
3580 will be determined by the library that checked the item out to the
3587 <section id="ConsiderOnSiteCheckoutsAsNormalCheckouts">
3588 <title><link linkend="ConsiderOnSiteCheckoutsAsNormalCheckouts">ConsiderOnSiteCheckoutsAsNormalCheckouts</link></title>
3589 <para>Default: Consider</para>
3590 <para>Asks: ___ on-site checkouts as normal checkouts. If enabled, the number of
3591 checkouts allowed will be normal checkouts + on-site checkouts. If disabled, both
3592 values will be checked separately. </para>
3593 <para>Values:<itemizedlist>
3595 <para>Consider</para>
3598 <para>Don't consider</para>
3600 </itemizedlist></para>
3601 <para>Description:<itemizedlist>
3603 <para>This preference allows you to decide if checkouts that are <link linkend="OnSiteCheckouts">OnSiteCheckouts</link> are counted toward the total
3604 checkouts a patron can have. You can also set your <link linkend="circfinerules">circulation and fine rules</link> to allow only a certain number of normal
3605 and OnSite checkouts.</para>
3607 </itemizedlist></para>
3609 <section id="DefaultLongOverdueChargeValue">
3610 <title><link linkend="DefaultLongOverdueChargeValue">DefaultLongOverdueChargeValue</link></title>
3611 <para>Asks: Charge a lost item to the borrower's account when the LOST value of the item
3612 changes to ___</para>
3613 <para>Description: <itemizedlist>
3615 <para>Leave this field empty if you don't want to charge the user for lost items.
3616 If you want the user to be charged enter the <link linkend="lost">LOST
3617 authorized value</link> you are using in the <link linkend="DefaultLongOverdueLostValue">DefaultLongOverdueLostValue</link>
3618 preference. This preference is used when the <link linkend="longoverduecron">longoverdue cron job</link> is called without the --charge parameter.</para>
3620 </itemizedlist></para>
3622 <section id="DefaultLongOverdueLostValue">
3623 <title><link linkend="DefaultLongOverdueLostValue">DefaultLongOverdueLostValue & DefaultLongOverdueDays </link></title>
3624 <para>Asks: By default, set the LOST value of an item to ___ when the item has been
3625 overdue for more than ___ days. </para>
3626 <para>Description:<itemizedlist>
3628 <para>These preferences are used when the <link linkend="longoverduecron">longoverdue cron job</link> is called without the --lost parameter. It allows
3629 users to set the values of the <link linkend="longoverduecron">longoverdue
3630 cron</link> without having to edit the crontab. Setting the values to 1 and
3631 30 for example will mark the item with the <link linkend="lost">LOST authorized
3632 value</link> of 1 after the item is 30 days overdue. </para>
3634 </itemizedlist></para>
3636 <section id="HoldsInNoissuesCharge">
3637 <title><link linkend="HoldsInNoissuesCharge">HoldsInNoissuesCharge</link></title>
3638 <para>Default: Don't include</para>
3639 <para>Asks: ___ hold charges when summing up charges for noissuescharge.</para>
3640 <para>Values:<itemizedlist>
3642 <para>Don't include</para>
3645 <para>Include</para>
3647 </itemizedlist></para>
3650 <section id="HomeOrHoldingBranch">
3651 <title><link linkend="HomeOrHoldingBranch">HomeOrHoldingBranch</link></title>
3653 <para>Default: the library the item was checked out from</para>
3655 <para>Asks: Use the checkout and fines rules of ___</para>
3657 <para>Values:</para>
3661 <para>the library the item is from<itemizedlist>
3663 <para>This is equivalent to 'home library'</para>
3665 </itemizedlist></para>
3669 <para>the library the item was checked out from<itemizedlist>
3671 <para>This is equivalent to 'holding library'</para>
3673 </itemizedlist></para>
3676 <para>Description:</para>
3679 <para>This preference does several things. <itemizedlist>
3681 <para>If <link linkend="CircControl">CircControl</link> is set to 'the library
3682 the item is from' then the <link linkend="circfinerules">circulation and
3683 fines policies</link> will be determined by the item's library where
3684 HomeOrHoldingBranch chooses if item's home library is used or holding
3685 library is used.</para>
3688 <para>If <link linkend="IndependentBranches">IndependentBranches</link> is set
3689 to 'Prevent' then the value of this preference is used in figuring out if
3690 the item can be checked out. If the item's home library does not match the
3691 logged in library, the item cannot be checked out unless you are a <link linkend="patronpermsdefined">superlibrarian</link>.</para>
3693 </itemizedlist></para>
3697 <para>It is not recommend that this setting be changed after initial setup of Koha
3698 because it will change the behavior of items already checked out.</para>
3702 <section id="InProcessingToShelvingCart">
3703 <title><link linkend="InProcessingToShelvingCart">InProcessingToShelvingCart</link></title>
3705 <para>Default: Don't move</para>
3707 <para>Asks: ___ items that have the location PROC to the location
3708 CART when they are checked in.</para>
3710 <para>Values:</para>
3714 <para>Don't move</para>
3721 <para>Description:<itemizedlist>
3723 <para>This preference is used to manage automatically changing item locations from
3724 processing (PROC) to the book cart (CART). A <link linkend="proccartcron">cron
3725 job</link> needs to be set to run at specified intervals to age items from
3726 CART to the permanent shelving location. (For example, an hourly cron entry of
3727 cart_to_shelf.pl --hours 3 where --hours is the amount of time an item should
3728 spend on the cart before aging to its permanent location.) More information can
3729 be found in the <link linkend="processinglocations">related chapter</link> in
3735 <para>If the <link linkend="ReturnToShelvingCart">ReturnToShelvingCart</link> system preference is turned on, any newly
3736 checked-in item is also automatically put into the shelving cart, to be
3737 covered by the same script run.</para>
3742 <para>Checkins with confirmed holds will not go into the shelving cart. If
3743 items on the shelving cart are checked out, the cart location will be
3750 </itemizedlist></para>
3753 <section id="IssuingInProcess">
3754 <title><link linkend="IssuingInProcess">IssuingInProcess</link></title>
3756 <para>Default: Don't prevent</para>
3758 <para>Asks: ___ patrons from checking out an item whose rental
3759 charge would take them over the limit.</para>
3761 <para>Values:</para>
3765 <para>Don't prevent</para>
3769 <para>Prevent</para>
3773 <para>Description:</para>
3777 <para>This preference determines if a patron can check items
3778 out if there is an overdue fine on the account and any of the
3779 materials the patron wishes to check out will potentially tip
3780 the account balance over the maximum fines policy the library
3781 has in place.</para>
3785 <para>Example: Your library has a $5 limit set for 'fines' (ie,
3786 after incurring $5 in fines, a patron can no longer check out
3787 items). A patron comes to the desk with 5 items to check out (4
3788 books and a video) The patron has $4 in charges already on their
3789 account. One of the videos has a rental charge of $1, therefore
3790 making the total fines on the patron's account suddenly $5 (the
3794 <section id="IssueLostItem">
3795 <title><link linkend="IssueLostItem">IssueLostItem</link></title>
3797 <para>Default: display a message</para>
3799 <para>Asks: When issuing an item that has been marked as lost,
3802 <para>Values:</para>
3806 <para>display a message</para>
3809 <screeninfo>Lost message when checking out</screeninfo>
3813 <imagedata fileref="images/admin/globalprefs/IssueLostItem-msg.png"/>
3820 <para>do nothing</para>
3824 <para>This option will just check the item out without
3825 notifying you that the item was marked lost.</para>
3831 <para>require confirmation</para>
3834 <screeninfo>Confirm checkout of lost item</screeninfo>
3838 <imagedata fileref="images/admin/globalprefs/IssueLostItem-confirm.png"/>
3845 <para>Description:</para>
3849 <para>This preference lets you define how library staff are
3850 notified that an item with a lost status is being checked out.
3851 This will help staff mark items as 'available' if you choose
3852 to 'display a message' or 'require confirmation.' If you
3853 choose to 'do nothing,' there will be no notification that the
3854 item being checked out is marked as 'lost.'</para>
3858 <section id="ManInvInNoissuesCharge">
3859 <title><link linkend="ManInvInNoissuesCharge">ManInvInNoissuesCharge</link></title>
3860 <para>Default: Include</para>
3861 <para>Asks: ___ MANUAL_INV charges when summing up charges for noissuescharge. </para>
3862 <para>Values:<itemizedlist>
3864 <para>Don't include</para>
3867 <para>Include</para>
3869 </itemizedlist></para>
3870 <para>Description:<itemizedlist>
3872 <para>This preference lets you decide if charges entered as manual invoices are
3873 included when calculating the <link linkend="noissuescharge">noissuescharge</link>. If this is set to include then Koha will include all
3874 manual invoices when deciding if the patron owes too much money to check
3875 anything else out of the library. If it's set to Don't include then Koha will
3876 ignore all manual invoice charges when figuring out if the patron owes too much
3877 money to checkout additional materials.</para>
3879 </itemizedlist></para>
3882 <section id="maxoutstanding">
3883 <title><link linkend="maxoutstanding">maxoutstanding</link></title>
3885 <para>Default: 5</para>
3887 <para>Asks: Prevent patrons from making holds on the OPAC if they
3888 owe more than ___ USD in fines.</para>
3891 <section id="noissuescharge">
3892 <title><link linkend="noissuescharge">noissuescharge</link></title>
3894 <para>Default: 5</para>
3896 <para>Asks: Prevent patrons from checking out books if they have
3897 more than ___ USD in fines.</para>
3899 <para>Description:</para>
3903 <para>This preference is the maximum amount of money owed to the library before the
3904 user is banned from borrowing more items. Using the <link linkend="ManInvInNoissuesCharge">ManInvInNoissuesCharge</link> and <link linkend="RentalsInNoissuesCharge">RentalsInNoissuesCharge</link> preferences you
3905 can control which types of charges are considered in this total. This also
3906 coincides with <link linkend="maxoutstanding">maxoutstanding</link> that limits
3907 patrons from placing holds when the maximum amount is owed to the library.</para>
3911 <section id="NoIssuesChargeGuarantees">
3912 <title><link linkend="NoIssuesChargeGuarantees">NoIssuesChargeGuarantees</link></title>
3913 <para>Asks: Prevent a patron from checking out if the patron has guarantees owing in
3914 total more than ___ USD in fines. </para>
3915 <para>Description:<itemizedlist>
3917 <para>Allows a library to prevent patrons from checking out items if his or her
3918 guarantees owe too much in fines.</para>
3920 </itemizedlist></para>
3922 <section id="NoRenewalBeforePrecision">
3923 <title><link linkend="NoRenewalBeforePrecision">NoRenewalBeforePrecision</link></title>
3924 <para>Default: date</para>
3925 <para>Asks: Calculate "No renewal before" based on ___. </para>
3926 <para>Values:<itemizedlist>
3931 <para>exact time</para>
3933 </itemizedlist><note>
3934 <para>Only relevant for loans calculated in days, hourly loans are not affected.
3937 <para>Description:<itemizedlist>
3939 <para>This preference allows you to control how the 'No renewal before" option in
3940 the <link linkend="circfinerules">Circulation and fine rules</link>
3941 administration area.</para>
3943 </itemizedlist></para>
3945 <section id="OnSiteCheckouts">
3946 <title><link linkend="OnSiteCheckouts">OnSiteCheckouts</link></title>
3947 <para>Default: Disable</para>
3948 <para>Asks: ___ the on-site checkouts feature.</para>
3949 <para>Values:<itemizedlist>
3951 <para>Disable</para>
3954 <para>Enable<screenshot>
3955 <screeninfo>OnSiteCheckouts</screeninfo>
3958 <imagedata fileref="images/admin/globalprefs/OnSiteCheckouts.png"/>
3961 </screenshot></para>
3963 </itemizedlist></para>
3964 <para>Description:<itemizedlist>
3966 <para>This preference lets you check out items that are 'not for loan' to patrons.
3967 A checkbox is added to the checkout screen when this preference is set to
3968 'Enable' labeled 'On-site checkout'. This allows you to track who's using items
3969 that are normally not for loan or are in a closed stack setting.</para>
3971 </itemizedlist></para>
3973 <section id="OnSiteCheckoutsForce">
3974 <title><link linkend="OnSiteCheckoutsForce">OnSiteCheckoutsForce</link></title>
3975 <para>Default: Disable</para>
3976 <para>Asks: ___ the on-site for all cases (Even if a user is debarred, etc.).</para>
3977 <para>Values:<itemizedlist>
3979 <para>Disable</para>
3984 <screeninfo>Force checkouts on restricted patrons</screeninfo>
3987 <imagedata fileref="images/admin/globalprefs/OnSiteCheckoutsForce.png"/>
3993 </itemizedlist></para>
3994 <para>Description:<itemizedlist>
3996 <para>This preference lets the staff override any restrictions a patron might have
3997 and check out items for use within the library. The <link linkend="OnSiteCheckouts">OnSiteCheckouts</link> preference must first be set
3998 to 'Enable' for this preference to be considered.</para>
4000 </itemizedlist></para>
4003 <section id="OverduesBlockCirc">
4004 <title><link linkend="OverduesBlockCirc">OverduesBlockCirc</link></title>
4006 <para>Default: Ask for confirmation</para>
4008 <para>Asks: ___ when checking out to a borrower that has overdues
4011 <para>Values:</para>
4015 <para>Ask for confirmation</para>
4019 <para>Will not let you check an item out to patrons with
4020 overdues until a librarian confirms that it is okay</para>
4030 <para>Block all patrons with overdue items from being able
4037 <para>Don't block</para>
4041 <para>Allow all patrons with overdue items to continue to
4048 <section id="OverduesBlockRenewing">
4049 <title><link linkend="OverduesBlockRenewing">OverduesBlockRenewing</link></title>
4050 <para>Default: allow renewing</para>
4051 <para>Asks: When a patron's checked out item is overdue, ___</para>
4052 <para>Values:<itemizedlist>
4054 <para>allow renewing</para>
4057 <para>block renewing for all the patron's items</para>
4060 <para>block renewing for only this item</para>
4062 </itemizedlist></para>
4065 <section id="OverdueNoticeBcc">
4066 <title><link linkend="OverdueNoticeBcc">OverdueNoticeBcc</link></title>
4068 <para>Asks: Send all notices as a BCC to this email address
4071 <para>This preference makes it so that a librarian can get a copy of every notice sent
4072 out to patrons.<note>
4073 <para>If you'd like more than one person to receive the blind copy you can simply
4074 enter in multiple email addresses separated by commas.</para>
4076 <para>The name of this preference is misleading, it does not only send overdues, but
4077 all notices to the BCC address.</para>
4080 <section id="OverdueNoticeCalendar">
4081 <title><link linkend="OverdueNoticeCalendar">OverdueNoticeCalendar</link></title>
4082 <para>Default: Ignore calendar</para>
4083 <para>Asks: ___ when working out the period for overdue notices</para>
4084 <para>Values:<itemizedlist>
4086 <para>Ignore calendar<itemizedlist>
4088 <para>Notices do not take holidays into account, so they will be sent even
4089 if holidays have meant the item is not actually overdue yet</para>
4091 </itemizedlist></para>
4094 <para>Use calendar<itemizedlist>
4096 <para>Notices take holidays into account, so they will not be sent if
4097 holidays mean the item is not actually overdue yet</para>
4099 </itemizedlist></para>
4101 </itemizedlist></para>
4104 <section id="PrintNoticesMaxLines">
4105 <title><link linkend="PrintNoticesMaxLines">PrintNoticesMaxLines</link></title>
4107 <para>Asks: Include up to ___ item lines in a printed overdue
4111 <para>If the number of items is greater than this number, the
4112 notice will end with a warning asking the borrower to check
4113 their online account for a full list of overdue items.</para>
4117 <para>Set to 0 to include all overdue items in the notice, no
4118 matter how many there are.</para>
4122 <para>This preference only refers to the print notices, not
4123 those sent via email.</para>
4127 <section id="RenewalPeriodBase">
4128 <title><link linkend="RenewalPeriodBase">RenewalPeriodBase</link></title>
4130 <para>Default: the old due date of the checkout</para>
4132 <para>Asks: When renewing checkouts, base the new due date on
4135 <para>Values:</para>
4139 <para>the old due date of the checkout</para>
4143 <para>the current date</para>
4147 <section id="RenewalSendNotice">
4148 <title><link linkend="RenewalSendNotice">RenewalSendNotice</link></title>
4149 <para> Default: Don't send </para>
4150 <para>Asks: ____ a renewal notice according to patron checkout alert preferences. </para>
4151 <para>Values: <itemizedlist>
4153 <para>Don't send</para>
4158 </itemizedlist></para>
4159 <para>Description:<itemizedlist>
4161 <para>If a patron has chosen to receive a check out notice in their messaging
4162 preferences and this preference is set to 'Send' then those patrons will also
4163 receive a notice when they renew materials. You will want to set up a <link linkend="addnotices">new notice</link> with the code of RENEWAL (if you don't
4164 already have it) with custom text for renewing items.<important>
4165 <para>This preference requires that you have <link linkend="EnhancedMessagingPreferences">EnhancedMessagingPreferences</link>
4166 set to 'Allow'</para>
4169 </itemizedlist></para>
4171 <section id="RentalsInNoissuesCharge">
4172 <title><link linkend="RentalsInNoissuesCharge">RentalsInNoissuesCharge</link></title>
4173 <para>Default: Include</para>
4174 <para>Asks: ___ rental charges when summing up charges for noissuescharge. </para>
4175 <para>Values:<itemizedlist>
4177 <para>Don't include</para>
4180 <para>Include</para>
4182 </itemizedlist></para>
4183 <para>Description:<itemizedlist>
4185 <para>This preference lets you decide if rental charges are included when
4186 calculating the <link linkend="noissuescharge">noissuescharge</link>. If this is
4187 set to include then Koha will include all rental charges when deciding if the
4188 patron owes too much money to check anything else out of the library. If it's
4189 set to Don't include then Koha will ignore all rental charges when figuring out
4190 if the patron owes too much money to checkout additional materials.</para>
4192 </itemizedlist></para>
4194 <section id="RestrictionBlockRenewing">
4195 <title><link linkend="RestrictionBlockRenewing">RestrictionBlockRenewing</link></title>
4196 <para>Default: Allow</para>
4197 <para>Asks: If patron is restricted, ___ renewing of items. </para>
4198 <para>Values:<itemizedlist>
4205 </itemizedlist></para>
4208 <section id="ReturnBeforeExpiry">
4209 <title><link linkend="ReturnBeforeExpiry">ReturnBeforeExpiry</link></title>
4211 <para>Default: Don't require</para>
4213 <para>Asks: ___ patrons to return books before their accounts
4214 expire (by restricting due dates to before the patron's expiration
4217 <para>Values:</para>
4221 <para>Don't require</para>
4225 <para>Require</para>
4229 <para>Description:</para>
4233 <para>This is preference may prevent a patron from having
4234 items checked out after their library card has expired. If
4235 this is set to "Require", then a due date of any checked out
4236 item can not be set for a date which falls after the patron's
4237 card expiration. If the setting is left "Don't require" then
4238 item check out dates may exceed the expiration date for the
4239 patron's library card.</para>
4244 <section id="ReturnToShelvingCart">
4245 <title><link linkend="ReturnToShelvingCart">ReturnToShelvingCart</link></title>
4247 <para>Default: Don't move</para>
4249 <para>Asks: ___ all items to the location CART when they are
4252 <para>Values:</para>
4256 <para>Don't move</para>
4263 <para>Description:<itemizedlist>
4265 <para>More information can be found in the <link linkend="processinglocations">related chapter</link> in this manual.</para>
4267 </itemizedlist></para>
4269 <section id="StaffSearchResultsDisplayBranch">
4270 <title><link linkend="StaffSearchResultsDisplayBranch">StaffSearchResultsDisplayBranch</link></title>
4271 <para>Default: the library the item is held by</para>
4272 <para>Asks: For search results in the staff client, display the branch of ___</para>
4273 <para>Values:<itemizedlist>
4275 <para>the library the item is from</para>
4278 <para>the library the items is held by</para>
4280 </itemizedlist></para>
4283 <section id="TransfersMaxDaysWarning">
4284 <title><link linkend="TransfersMaxDaysWarning">TransfersMaxDaysWarning</link></title>
4286 <para>Default: 3</para>
4288 <para>Asks: Show a warning on the "Transfers to Receive" screen if
4289 the transfer has not been received ___ days after it is
4292 <para>Description:</para>
4296 <para>The TransferMaxDaysWarning preference is set at a
4297 default number of days. This preference allows for a warning
4298 to appear after a set amount of time if an item being
4299 transferred between library branches has not been received.
4300 The warning will appear in the <link linkend="transferstoreceive">Transfers to Receive</link>
4306 <section id="UseBranchTransferLimits">
4307 <title><link linkend="UseBranchTransferLimits">UseBranchTransferLimits &
4308 BranchTransferLimitsType</link></title>
4310 <para>Defaults: Don't enforce & collection code</para>
4312 <para>Asks: ___ branch transfer limits based on ___</para>
4314 <para>UseBranchTransferLimits Values:</para>
4318 <para>Don't enforce</para>
4322 <para>Enforce</para>
4326 <para>BranchTransferLimitsType Values:</para>
4330 <para>collection code</para>
4334 <para>item type</para>
4338 <para>BranchTransferLimitsType Description:</para>
4342 <para>This parameter is a binary setting which determines
4343 whether items are transferred according to item type or
4344 collection code. This value determines how the library manager
4345 is able to restrict what items can be transferred between the
4351 <section id="useDaysMode">
4352 <title><link linkend="useDaysMode">useDaysMode</link></title>
4354 <para>Default: Don't include</para>
4356 <para>Asks: Calculate the due date using ___.</para>
4358 <para>Values:</para>
4362 <para>circulation rules only.</para>
4366 <para>the calendar to push the due date to the next open
4371 <para>the calendar to skip all days the library is
4376 <para>Description:</para>
4380 <para>This preference controls how scheduled library closures
4381 affect the due date of a material. The 'the calendar to skip
4382 all days the library is closed' setting allows for a scheduled
4383 closure not to count as a day in the loan period, the
4384 'circulation rules only' setting would not consider the
4385 scheduled closure at all, and 'the calendar to push the due
4386 date to the next open day' would only effect the due date if
4387 the day the item is due would fall specifically on the day of
4392 <para>Example:</para>
4396 <para>The library has put December 24th and 25th in as
4397 closures on the calendar. A book checked out by a patron has a
4398 due date of December 25th according to the circulation and
4399 fine rules. If this preference is set to 'circulation rules
4400 only' then the item will remain due on the 25th. If the
4401 preference is set to 'the calendar to push the due date to the
4402 next open day' then the due date will be December 26th. If the
4403 preference is set to 'the calendar to skip all days the
4404 library is closed' then the due date will be pushed to the
4405 27th of December to accommodate for the two closed
4410 <para>The calendar is defined on a branch by branch basis. To
4411 learn more about the calendar, check out the '<link linkend="calholidays">Calendar & Holidays</link>' section of
4414 <section id="UseTransportCostMatrix">
4415 <title><link linkend="UseTransportCostMatrix">UseTransportCostMatrix</link></title>
4416 <para>Default: Don't use</para>
4417 <para>Asks: ___ Transport Cost Matrix for calculating optimal holds filling between
4419 <para>Values:<itemizedlist>
4421 <para>Don't use</para>
4426 </itemizedlist></para>
4427 <para>Description:<itemizedlist>
4429 <para>If the system is configured to use the <link linkend="transportcostmatrix">Transport cost matrix</link> for filling holds, then when attempting to fill
4430 a hold, the system will search for the lowest cost branch, and attempt to fill
4431 the hold with an item from that branch first. Branches of equal cost will be
4432 selected from randomly. The branch or branches of the next highest cost shall be
4433 selected from only if all the branches in the previous group are unable to fill
4435 <para>The system will use the item's current holding branch when determining
4436 whether the item can fulfill a hold using the Transport Cost Matrix. </para>
4438 </itemizedlist></para>
4441 <section id="coursereserveprefs">
4442 <title><link linkend="coursereserveprefs">Course Reserves</link></title>
4443 <section id="UseCourseReserves">
4444 <title><link linkend="UseCourseReserves">UseCourseReserves</link></title>
4445 <para>Default: Don't use</para>
4446 <para>Asks: ___ course reserves</para>
4447 <para>Values:</para>
4450 <para>Don't use</para>
4456 <para>Description:<itemizedlist>
4458 <para>The <link linkend="coursereserves">Course Reserves</link> module in Koha
4459 allows you to temporarily move items to 'reserve' and assign different
4460 circulation rules to these items while they are being used for a specific
4463 </itemizedlist></para>
4467 <section id="circfinespolicy">
4468 <title><link linkend="circfinespolicy">Fines Policy</link></title>
4472 <section id="finesCalendar">
4473 <title><link linkend="finesCalendar">finesCalendar</link></title>
4475 <para>Default: not including the days the library is closed</para>
4477 <para>Asks: Calculate fines based on days overdue ___</para>
4479 <para>Values:</para>
4483 <para>directly</para>
4487 <para>not including the days the library is closed</para>
4491 <para>Description:</para>
4495 <para>This preference will determine whether or not fines will
4496 be accrued during instances when the library is closed.
4497 Examples include holidays, library in-service days, etc.
4498 Choosing "not including the days the library is closed"
4499 setting will enable Koha to access its <link linkend="calholidays">Calendar</link> module and be
4500 considerate of dates when the library is closed. To make use
4501 of this setting the administrator must first access Koha's
4502 calendar and mark certain days as "holidays" ahead of
4507 <para>The calendar is defined on a branch by branch basis. To
4508 learn more about the calendar, check out the '<link linkend="calholidays">Calendar & Holidays</link>' section of
4511 <section id="FinesIncludeGracePeriod">
4512 <title><link linkend="FinesIncludeGracePeriod">FinesIncludeGracePeriod</link></title>
4513 <para>Default: Include</para>
4514 <para>Asks: ___ the grace period when calculating the fine for an overdue item.</para>
4515 <para>Values:<itemizedlist>
4517 <para>Don't include</para>
4520 <para>Include</para>
4522 </itemizedlist></para>
4523 <para>Description:<itemizedlist>
4525 <para>This preference lets you control how Koha calculates fines when there is a
4526 grace period. If you choose to include the grace period when calculating fines
4527 then Koha will charge for the days in the grace period should the item be
4528 overdue more than those days. If you choose not to include the grace period then
4529 Koha will only charge for the days overdue after the grace period.</para>
4531 </itemizedlist></para>
4534 <section id="finesMode">
4535 <title><link linkend="finesMode">finesMode</link></title>
4537 <para>Default: Calculate (but only for mailing to the
4540 <para>Asks: ___ fines</para>
4542 <para>Values:</para>
4546 <para>Calculate (but only for mailing to the admin)</para>
4550 <para>Calculate and charge</para>
4554 <para>Don't calculate</para>
4559 <para>Requires that you have the fines cron job running
4560 (misc/cronjobs/fines.pl)</para>
4563 <section id="RefundLostItemFeeOnReturn">
4564 <title><link linkend="RefundLostItemFeeOnReturn">RefundLostItemFeeOnReturn</link></title>
4565 <para>Default: Refund</para>
4566 <para>Asks: ___ lost item fees charged to a borrower when the lost item is
4568 <para>Values:<itemizedlist>
4570 <para>Don't refund</para>
4575 </itemizedlist></para>
4576 <para>Description:<itemizedlist>
4578 <para>When an item is marked lost in Koha the system charges the patron the
4579 replacement fee for the item. This preference lets you control how Koha handles
4580 returns of these items. By default when an item that was previously marked lost
4581 is checked in Koha refunds the patron the replacement fee. Change this
4582 preference to "Don't refund" if you would like Koha to not refund the
4583 replacement fee.</para>
4585 </itemizedlist></para>
4587 <section id="WhenLostChargeReplacementFee">
4588 <title><link linkend="WhenLostChargeReplacementFee">WhenLostChargeReplacementFee</link></title>
4589 <para>Default: Charge</para>
4590 <para>Asks: ___ the replacement price when a patron loses an item. </para>
4591 <para>Values:<itemizedlist>
4596 <para>Don't charge</para>
4598 </itemizedlist></para>
4599 <para>Description:<itemizedlist>
4601 <para>This preference lets you tell Koha what to do with an item is marked lost.
4602 If you want Koha can 'Charge' the patron the replacement fee listed on the item
4603 they lost or it can do nothing in reference to the patron and just mark the item
4604 lost in the catalog.</para>
4606 </itemizedlist></para>
4608 <section id="WhenLostForgiveFine">
4609 <title><link linkend="WhenLostForgiveFine">WhenLostForgiveFine</link></title>
4610 <para>Default: Don't forgive</para>
4611 <para>Asks: ___ the fines on an item when it is lost.</para>
4612 <para>Values:<itemizedlist>
4614 <para>Don't forgive</para>
4617 <para>Forgive</para>
4619 </itemizedlist></para>
4620 <para>Description:<itemizedlist>
4622 <para>This preference allows the library to decide if fines are charged in
4623 addition to the replacement fee when an item is marked as lost. If this
4624 preference is set to 'Forgive' then the patron won't be charged fines in
4625 addition to the replacement fee.</para>
4627 </itemizedlist></para>
4631 <section id="circholdspolicy">
4632 <title><link linkend="circholdspolicy">Holds Policy</link></title>
4636 <section id="AllowHoldDateInFuture">
4637 <title><link linkend="AllowHoldDateInFuture">AllowHoldDateInFuture</link></title>
4639 <para>Default: Allow</para>
4641 <para>Asks: ___ hold requests to be placed that do not enter the
4642 waiting list until a certain future date.</para>
4644 <para>Values:</para>
4652 <para>Don't allow</para>
4656 <section id="AllowHoldItemTypeSelection">
4657 <title><link linkend="AllowHoldItemTypeSelection">AllowHoldItemTypeSelection</link></title>
4658 <para>Default: Don't allow</para>
4659 <para>Asks: ___ hold fulfillment to be limited by itemtype.</para>
4660 <para>Values:</para>
4666 <para>Don't allow</para>
4671 <section id="AllowHoldsOnDamagedItems">
4672 <title><link linkend="AllowHoldsOnDamagedItems">AllowHoldsOnDamagedItems</link></title>
4674 <para>Default: Allow</para>
4676 <para>Asks: ___ hold requests to be placed on damaged
4679 <para>Values:</para>
4687 <para>Don't allow</para>
4691 <para>Description:</para>
4695 <para>This parameter is a binary setting which controls
4696 whether or not hold requests can be placed on items that are
4697 marked as "damaged" (items are marked as damaged by editing
4698 subfield 4 on the item record). Setting this value to "Don't
4699 allow" will prevent anyone from placing a hold on such items,
4700 setting it to "Allow" will allow it. This preference is
4701 important because it determines whether or not a patron can
4702 place a request for an item that might be in the process of
4703 being repaired or not in good condition. The library may wish
4704 to set this to "Don't allow" if they were concerned about
4705 their patrons not receiving the item in a timely manner or at
4706 all (if it is determined that the item is beyond repair).
4707 Setting it to "Allow" would allow a patron to place a hold on
4708 an item and therefore receive it as soon as it becomes
4713 <section id="AllowHoldsOnPatronsPossessions">
4714 <title><link linkend="AllowHoldsOnPatronsPossessions">AllowHoldsOnPatronsPossessions</link></title>
4715 <para>Default: Allow </para>
4716 <para>Asks: ____ a patron to place a hold on a record where the patron already has one
4717 or more items attached to that record checked out. </para>
4718 <para>Values:<itemizedlist>
4723 <para>Don't allow</para>
4725 </itemizedlist></para>
4726 <para>Description:<itemizedlist>
4728 <para>By setting to "Don't allow," you can prevent patrons from placing holds on
4729 items they already have out, thus preventing them from blocking anyone else from
4730 getting an item. </para>
4732 </itemizedlist></para>
4735 <section id="AllowHoldPolicyOverride">
4736 <title><link linkend="AllowHoldPolicyOverride">AllowHoldPolicyOverride</link></title>
4738 <para>Default: Allow</para>
4740 <para>Asks: ___ staff to override hold policies when placing
4743 <para>Values:</para>
4751 <para>Don't allow</para>
4755 <para>Description:</para>
4759 <para>This preference is a binary setting which controls
4760 whether or not the library staff can override the circulation
4761 and fines rules as they pertain to the placement of holds.
4762 Setting this value to "Don't allow" will prevent anyone from
4763 overriding, setting it to "Allow" will allow it. This setting
4764 is important because it determines how strict the libraries
4765 rules for placing holds are. If this is set to "Allow",
4766 exceptions can be made for patrons who are otherwise normally
4767 in good standing with the library, but there is opportunity
4768 for the staff to abuse this function. If it is set to "Don't
4769 allow", no abuse of the system is possible, but it makes the
4770 system entirely inflexible in respect to holds.</para>
4774 <section id="AllowRenewalIfOtherItemsAvailable">
4775 <title><link linkend="AllowRenewalIfOtherItemsAvailable">AllowRenewalIfOtherItemsAvailable</link></title>
4776 <para>Default: Don't allow</para>
4777 <para>Asks: ___ a patron to renew an item with unfilled holds if other available items
4778 can fill that hold.</para>
4779 <para>Values:<itemizedlist>
4784 <para>Don't allow</para>
4786 </itemizedlist></para>
4789 <section id="AutoResumeSuspendedHolds">
4790 <title><link linkend="AutoResumeSuspendedHolds">AutoResumeSuspendedHolds</link></title>
4792 <para>Default: Allow</para>
4794 <para>Asks: ___ suspended holds to be automatically resumed by a
4797 <para>Values:</para>
4805 <para>Don't allow</para>
4809 <para>Description:</para>
4813 <para>If this preference is set to 'Allow' then all suspended holds will be able to
4814 have a date at after which they automatically become unsuspended. If you have this
4815 preference set to 'Allow' you will also need the <link linkend="unsuspendholdcron">Unsuspend Holds</link> cron job running.</para>
4819 <para>The holds will become unsuspended the date after that entered by the
4824 <section id="canreservefromotherbranches">
4825 <title><link linkend="canreservefromotherbranches">canreservefromotherbranches</link></title>
4827 <para>Default: Allow</para>
4829 <para>Asks: ___ a user from one library to place a hold on an item
4830 from another library</para>
4832 <para>Description:</para>
4836 <para>This preference is a binary setting which determines
4837 whether patrons can place holds on items from other branches.
4838 If the preference is set to "Allow" patrons can place such
4839 holds, if it is set to "Don't allow" they cannot. This is an
4840 important setting because it determines if users can use Koha
4841 to request items from another branch. If the library is
4842 sharing an installation of Koha with other independent
4843 libraries which do not wish to allow interlibrary borrowing it
4844 is recommended that this parameter be set to "Don't
4849 <para>Values:</para>
4857 <para>Don't allow (with <link linkend="IndependentBranches">independent
4858 branches</link>)</para>
4862 <section id="ConfirmFutureHolds">
4863 <title><link linkend="ConfirmFutureHolds">ConfirmFutureHolds</link></title>
4864 <para>Default: 0</para>
4865 <para>Asks: Confirm future hold requests (starting no later than ___ days from now) at
4866 checkin time. </para>
4867 <para>Description:<itemizedlist>
4869 <para>When confirming a hold at checkin time, the number of days in this
4870 preference is taken into account when deciding which holds to show alerts for.
4871 This preference does not interfere with renewing, checking out or transferring a
4874 </itemizedlist></para>
4876 <para>This number of days will be used too in calculating the default end date for the
4877 Holds to pull-report. But it does not interfere with issuing, renewing or
4878 transferring books.</para>
4881 <para>This preference is only looked at if you're allowing hold dates in the future
4882 with <link linkend="AllowHoldDateInFuture">AllowHoldDateInFuture</link> or <link linkend="OPACAllowHoldDateInFuture">OPACAllowHoldDateInFuture</link></para>
4885 <section id="decreaseLoanHighHolds">
4886 <title><link linkend="decreaseLoanHighHolds">decreaseLoanHighHolds, decreaseLoanHighHoldsDuration, decreaseLoanHighHoldsValue,
4887 decreaseLoanHighHoldsControl, and decreaseLoanHighHoldsIgnoreStatuses </link></title>
4888 <para>Asks: ___ the reduction of loan period ___ to days for items with more than ___
4889 holds ___ . Ignore items with the following statuses when counting items ___</para>
4890 <para>decreaseLoanHighHolds default: Don't enable</para>
4891 <para>decreaseLoanHighHoldsControl default: on the record</para>
4892 <para>decreaseLoanHighHolds values:<itemizedlist>
4893 <para>Don't enable</para>
4897 </itemizedlist></para>
4898 <para>decreaseLoanHighHoldsControl values:<itemizedlist>
4900 <para>over the number of holdable items on the records</para>
4903 <para>on the record</para>
4905 </itemizedlist></para>
4906 <para>decreaseLoanHighHoldsIgnoreStatuses values:<itemizedlist>
4908 <para>[Select All]</para>
4911 <para>Damages</para>
4917 <para>Not for loan</para>
4920 <para>Withdrawn</para>
4922 </itemizedlist></para>
4923 <para>Description:<itemizedlist>
4925 <para>These preferences let you change the loan length for items that have many
4926 holds on them. This will not effect items that are already checked out, but
4927 items that are checked out after the decreaseLoanHighHoldsValue is met will only
4928 be checked out for the number of days entered in the
4929 decreaseLoanHighHoldsDuration preference.</para>
4931 <screeninfo>Warning on checkout</screeninfo>
4934 <imagedata fileref="images/admin/globalprefs/decreaseLoanHighHoldsDuration.png"/>
4939 </itemizedlist></para>
4942 <section id="DisplayMultiPlaceHold">
4943 <title><link linkend="DisplayMultiPlaceHold">DisplayMultiPlaceHold</link></title>
4945 <para>Default: Don't enable</para>
4947 <para>Asks: ___ the ability to place holds on multiple biblio from
4948 the search results</para>
4950 <para>Values:</para>
4954 <para>Don't enable</para>
4963 <section id="emailLibrarianWhenHoldIsPlaced">
4964 <title><link linkend="emailLibrarianWhenHoldIsPlaced">emailLibrarianWhenHoldIsPlaced</link></title>
4966 <para>Default: Don't enable</para>
4968 <para>Asks: ___ sending an email to the Koha administrator email
4969 address whenever a hold request is placed.</para>
4971 <para>Values:</para>
4975 <para>Don't enable</para>
4983 <para>Description:</para>
4987 <para>This preference enables Koha to email the library staff
4988 whenever a patron requests an item to be held. While this
4989 function will immediately alert the librarian to the patron's
4990 need, it is extremely impractical in most library settings. In
4991 most libraries the hold lists are monitored and maintained
4992 from a separate interface. That said, many libraries that
4993 allow on shelf holds prefer to have this preference turned on
4994 so that they are alerted to pull an item from the
5000 <para>In order for this email to send you must have a <link linkend="notices">notice</link> template with the code of HOLDPLACED</para>
5004 <para>This notice will only be sent if the <link linkend="msgqueuecron">process_message_queue.pl cronjob</link>
5005 being run periodically to send the messages.</para>
5009 <section id="ExpireReservesMaxPickUpDelay">
5010 <title><link linkend="ExpireReservesMaxPickUpDelay">ExpireReservesMaxPickUpDelay</link></title>
5012 <para>Default: Don't allow</para>
5014 <para>Asks: ___ holds to expire automatically if they have not
5015 been picked by within the time period specified in <link linkend="ReservesMaxPickUpDelay">ReservesMaxPickUpDelay</link></para>
5017 <para>Values:</para>
5025 <para>Don't allow</para>
5029 <para>Description:</para>
5033 <para>If set to 'allow' this will cancel holds that have been
5034 waiting for longer than the number of days specified in the
5035 <link linkend="ReservesMaxPickUpDelay">ReservesMaxPickUpDelay</link>
5036 system preference. Holds will only be cancelled if the <link linkend="expiredholdscron">Expire Holds cron job</link> is
5042 <section id="ExpireReservesMaxPickUpDelayCharge">
5043 <title><link linkend="ExpireReservesMaxPickUpDelayCharge">ExpireReservesMaxPickUpDelayCharge</link></title>
5045 <para>Default: 0</para>
5047 <para>Asks: If using <link linkend="ExpireReservesMaxPickUpDelay">ExpireReservesMaxPickUpDelay</link>,
5048 charge a borrower who allows his or her waiting hold to expire a
5049 fee of ___ USD</para>
5051 <para>Description:</para>
5055 <para>If you are expiring holds that have been waiting too
5056 long you can use this preference to charge the patron for not
5057 picking up their hold. If you don't charge patrons for items
5058 that aren't picked up you can leave this set to the default
5059 which is 0. Holds will only be cancelled and charged if the
5060 <link linkend="expiredholdscron">Expire Holds cron job</link>
5065 <section id="ExpireReservesOnHolidays">
5066 <title><link linkend="ExpireReservesOnHolidays">ExpireReservesOnHolidays</link></title>
5067 <para>Default: Allow</para>
5068 <para>Asks: ___ expired holds to be cancelled on days the library is closed.</para>
5069 <para>Values:<itemizedlist>
5074 <para>Don't allow</para>
5076 </itemizedlist></para>
5078 <section label="" id="LocalHoldsPriority">
5079 <title><link linkend="LocalHoldsPriority">LocalHoldsPriority, LocalHoldsPriorityPatronControl,
5080 LocalHoldsPriorityItemControl</link></title>
5081 <para>Asks: ___ priority for filling holds to patrons whose ___ matches the item's
5083 <para>LocalHoldsPriority Values:<itemizedlist>
5085 <para>Don't give</para>
5090 </itemizedlist></para>
5091 <para>LocalHoldsPriorityPatronControl Values:<itemizedlist>
5093 <para>home library</para>
5096 <para>pickup library</para>
5098 </itemizedlist></para>
5099 <para>LocalHoldsPriorityItemControl Values:<itemizedlist>
5101 <para>holding library</para>
5104 <para>home library</para>
5106 </itemizedlist></para>
5107 <para>Description:<itemizedlist>
5109 <para>This feature will allow libraries to specify that, when an item is returned,
5110 a local hold may be given priority for fulfillment even though it is of lower
5111 priority in the list of unfilled holds. </para>
5113 </itemizedlist></para>
5116 <section id="maxreserves">
5117 <title><link linkend="maxreserves">maxreserves</link></title>
5119 <para>Default: 50</para>
5121 <para>Asks: Patrons can only have ___ holds at once.</para>
5124 <section id="OPACAllowHoldDateInFuture">
5125 <title><link linkend="OPACAllowHoldDateInFuture">OPACAllowHoldDateInFuture</link></title>
5127 <para>Default: Allow</para>
5129 <para>Asks: ___ patrons to place holds that don't enter the
5130 waiting list until a certain future date.</para>
5132 <para>Values:</para>
5140 <para><link linkend="AllowHoldDateInFuture">AllowHoldDateInFuture</link>
5141 must also be enabled for this to work</para>
5147 <para>Don't allow</para>
5152 <section id="OPACAllowUserToChooseBranch">
5153 <title><link linkend="OPACAllowUserToChooseBranch">OPACAllowUserToChooseBranch</link></title>
5155 <para>Default: Allow</para>
5157 <para>Asks: ___ a user to choose the branch to pick up a hold
5160 <para>Values:</para>
5168 <para>Don't allow</para>
5172 <para>Description:</para>
5176 <para>Changing this preference will not prevent staff from
5177 being able to transfer titles from one branch to another to
5178 fill a hold, it will only prevent patrons from saying they
5179 plan on picking a book up at a branch other than their home
5185 <section id="ReservesControlBranch">
5186 <title><link linkend="ReservesControlBranch">ReservesControlBranch</link></title>
5188 <para>Default: item's home library</para>
5190 <para>Asks: Check the ___ to see if the patron can place a hold on
5193 <para>Values:</para>
5197 <para>item's home library.</para>
5201 <para>patron's home library.</para>
5206 <section id="ReservesMaxPickUpDelay">
5207 <title><link linkend="ReservesMaxPickUpDelay">ReservesMaxPickUpDelay</link></title>
5209 <para>Default: 7</para>
5211 <para>Asks: Mark a hold as problematic if it has been waiting for
5212 more than ___ days.</para>
5214 <para>Description:</para>
5218 <para>This preference (based on calendar days, not the <link linkend="calholidays">Koha holiday calendar</link>) puts an
5219 expiration date on an item a patron has on hold. After this
5220 expiration date the staff will have the option to release the
5221 unclaimed hold which then may be returned to the library shelf
5222 or issued to the next patron on the item's hold list. Items
5223 that are 'expired' by this preference are moved to the 'Holds
5224 Over' tab on the '<link linkend="holdspickup">Holds Awaiting
5225 Pickup</link>' report.</para>
5230 <section id="ReservesNeedReturns">
5231 <title><link linkend="ReservesNeedReturns">ReservesNeedReturns</link></title>
5233 <para>Default: Don't automatically</para>
5235 <para>Asks: ___ mark holds as found and waiting when a hold is
5236 placed specifically on them and they are already checked
5239 <para>Values:</para>
5243 <para>Automatically</para>
5247 <para>Don't automatically</para>
5251 <para>Description:</para>
5255 <para>This preference refers to 'item specific' holds where
5256 the item is currently on the library shelf. This preference
5257 allows a library to decide whether an 'item specific' hold is
5258 marked as "Waiting" at the time the hold is placed or if the
5259 item will be marked as "Waiting" after the item is checked in.
5260 This preference will tell the patron that their item is
5261 'Waiting' for them at their library and ready for check
5267 <section id="holdqueueweight">
5268 <title><link linkend="holdqueueweight">StaticHoldsQueueWeight, HoldsQueueSkipClosed
5269 & RandomizeHoldsQueueWeight</link></title>
5271 <para>StaticHoldsQueueWeight Default: 0</para>
5272 <para>HoldsQueueSkipClosed Default: open or closed</para>
5274 <para>RandomizeHoldsQueueWeight Default: in that order</para>
5276 <para>Asks: Satisfy holds using items from the libraries ___ (as branchcodes, separated
5277 by commas; if empty, uses all libraries) when they are ___ ___.</para>
5278 <para>HoldsQueueSkipClosed Values:<itemizedlist>
5280 <para>open or closed</para>
5285 </itemizedlist></para>
5287 <para>RandomizeHoldsQueueWeight Values:</para>
5291 <para>in random order</para>
5295 <para>If StaticHoldsQueueWeight is left at the default
5296 Koha will randomize all libraries, otherwise it will
5297 randomize the libraries listed.</para>
5303 <para>in that order</para>
5307 <para>If StaticHoldsQueueWeight is left at the default
5308 then this will use all of your branches in alphabetical
5309 order, otherwise it will use the branches in the order
5310 that you entered them in the StaticHoldsQueueWeight
5317 <para>Descriptions:</para>
5321 <para>These preferences control how the <link linkend="holdsqueue">Holds Queue report</link> is generated
5322 using <link linkend="buildholdscron">a cron job</link>.</para>
5324 <para>If you do not want all of your libraries to participate
5325 in the on-shelf holds fulfillment process, you should list the
5326 the libraries that *do* participate in the process here by
5327 inputting all the participating library's branchcodes,
5328 separated by commas ( e.g. "MPL,CPL,SPL,BML" etc. ).</para>
5330 <para>By default, the holds queue will be generated such that
5331 the system will first attempt to hold fulfillment using items
5332 already at the pickup library if possible. If there are no
5333 items available at the pickup library to fill a hold,
5334 build_holds_queue.pl will then use the list of libraries
5335 defined in StaticHoldsQueueWeight. If
5336 RandomizeHoldsQueueWeight is disabled ( which it is by default
5337 ), the script will assign fulfillment requests in the order
5338 the branches are placed in the StaticHoldsQueueWeight system
5341 <para>For example, if your system has three libraries, of
5342 varying sizes ( small, medium and large ) and you want the
5343 burden of holds fulfillment to be on larger libraries before
5344 smaller libraries, you would want StaticHoldsQueueWeight to
5345 look something like "LRG,MED,SML".</para>
5347 <para>If you want the burden of holds fulfillment to be spread
5348 out equally throughout your library system, simply enable
5349 RandomizeHoldsQueueWeight. When this system preference is
5350 enabled, the order in which libraries will be requested to
5351 fulfill an on-shelf hold will be randomized each time the list
5352 is regenerated.</para>
5354 <para>Leaving StaticHoldsQueueWeight empty is contraindicated
5355 at this time. Doing so will cause the build_holds_queue script
5356 to ignore RandomizeHoldsQueueWeight, causing the script to
5357 request hold fulfillment not randomly, but by alphabetical
5362 <para>The <link linkend="transportcostmatrix">Transport Cost Matrix</link> takes
5363 precedence in controlling where holds are filled from, if the matrix is not used
5364 then Koha checks the StaticHoldsQueueWeight. To use the Transport Cost Matrix
5365 simply set your <link linkend="UseTransportCostMatrix">UseTransportCostMatrix</link>
5366 preference to 'Use'</para>
5370 <section id="SuspendHoldsIntranet">
5371 <title><link linkend="SuspendHoldsIntranet">SuspendHoldsIntranet</link></title>
5373 <para>Default: Allow</para>
5375 <para>Asks: ___ holds to be suspended from the intranet.</para>
5377 <para>Values:</para>
5385 <para>Don't allow</para>
5389 <para>Description:</para>
5393 <para>The holds suspension feature can be turned on and off in
5394 the staff client by altering this system preference. If this
5395 is set to 'allow' you will want to set the <link linkend="AutoResumeSuspendedHolds">AutoResumeSuspendedHolds</link>
5396 system preference.</para>
5401 <section id="SuspendHoldsOpac">
5402 <title><link linkend="SuspendHoldsOpac">SuspendHoldsOpac</link></title>
5404 <para>Default: Allow</para>
5406 <para>Asks: ___ holds to be suspended from the OPAC.</para>
5408 <para>Values:</para>
5416 <para>Don't allow</para>
5420 <para>Description:</para>
5424 <para>The holds suspension feature can be turned on and off in
5425 the OPAC by altering this system preference. If this is set to
5426 'allow' you will want to set the <link linkend="AutoResumeSuspendedHolds">AutoResumeSuspendedHolds</link>
5427 system preference.</para>
5431 <section id="TransferWhenCancelAllWaitingHolds">
5432 <title><link linkend="TransferWhenCancelAllWaitingHolds">TransferWhenCancelAllWaitingHolds</link></title>
5433 <para>Default: Don't transfer</para>
5434 <para>Asks: ___ items when cancelling all waiting holds. </para>
5435 <para>Values:<itemizedlist>
5437 <para>Don't transfer</para>
5440 <para>Transfer</para>
5442 </itemizedlist></para>
5443 <para>Description:<itemizedlist>
5445 <para>When TransferWhenCancelAllWaitingHolds is set to "Don't transfer", no branch
5446 transfer records are created. Koha will not allow the holds to be transferred,
5447 because that would orphan the items at the library where the holds were awaiting
5448 pickup, without any further instruction to staff as to what items are at the
5449 library or where they need to go. When that system preference set to "Transfer",
5450 branch transfers are created, so the holds may be cancelled.</para>
5452 </itemizedlist></para>
5456 <section id="circinterfaceprefs">
5457 <title><link linkend="circinterfaceprefs">Interface</link></title>
5461 <section id="AllowAllMessageDeletion">
5462 <title><link linkend="AllowAllMessageDeletion">AllowAllMessageDeletion</link></title>
5464 <para>Default: Don't allow</para>
5466 <para>Asks: ___ staff to delete messages added from other
5469 <para>Values:</para>
5477 <para>Don't allow</para>
5481 <section id="AllowOfflineCirculation">
5482 <title><link linkend="AllowOfflineCirculation">AllowOfflineCirculation</link></title>
5483 <para>Default: Do not enable</para>
5484 <para>Asks: ___ offline circulation on regular circulation computers. </para>
5485 <para>Values:<itemizedlist>
5487 <para>Do not enable</para>
5492 </itemizedlist></para>
5493 <para>Description:<itemizedlist>
5495 <para>Setting this preference to 'Enable' allows you to use the Koha interface for
5496 <link linkend="offlinecirc">offline circulation</link>. This system preference
5497 does not affect the <link linkend="firefoxofflinecirc">Firefox plugin</link> or
5498 the <link linkend="windowsofflinecirc">desktop application</link>, any of these
5499 three options can be used for offline circulation without effecting the
5502 </itemizedlist></para>
5504 <section id="AudioAlerts">
5505 <title><link linkend="AudioAlerts">AudioAlerts</link></title>
5506 <para>Default: Don't enable</para>
5507 <para>Asks: ___ audio alerts for events defined in the audio alerts section of
5508 administration.</para>
5509 <para>Values:</para>
5512 <para>Don't enable</para>
5520 <para>This feature is not supported by all browsers. Requires an HTML5 compliant
5526 <section id="CircAutocompl">
5527 <title><link linkend="CircAutocompl">CircAutocompl</link></title>
5529 <para>Default: Try</para>
5531 <para>Asks: ___ to automatically fill in the member when entering
5532 a patron search on the circulation screen.</para>
5534 <para>Description:</para>
5538 <para>This preference is a binary setting which determines
5539 whether auto-completion of fields is enabled or disabled for
5540 the circulation input field. Setting it to "Try" would enable
5541 a staff member to begin typing a name or other value into the
5542 field and have a menu pop up with suggestions for completing
5543 it. Setting it to "Don't try" would disable this feature. This
5544 preference can make staff members' jobs easier or it could
5545 potentially slow down the page loading process.</para>
5549 <para>Values:</para>
5553 <para>Don't try</para>
5560 <screeninfo>When CircAutocompl is turned on search results
5561 will appear below the search box</screeninfo>
5565 <imagedata fileref="images/admin/globalprefs/CircAutocompl.png"/>
5573 <section id="CircAutoPrintQuickSlip">
5574 <title><link linkend="CircAutoPrintQuickSlip">CircAutoPrintQuickSlip</link></title>
5576 <para>Default: open a print quick slip window</para>
5578 <para>Asks: When an empty barcode field is submitted in
5579 circulation ___</para>
5581 <para>Values:</para>
5585 <para>clear the screen</para>
5589 <para>open a print quick slip window</para>
5592 <para>open a print slip window</para>
5596 <para>Description:</para>
5600 <para>If this preference is set to open a quick slip (<link linkend="existingnotices">ISSUEQSLIP</link>) or open a slip (<link linkend="existingnotices">ISSUESLIP</link>) for printing it will eliminate the
5601 need for the librarian to click the print button to generate a checkout receipt
5602 for the patron they're checking out to. If the preference is set to clear the
5603 screen then "checking out" an empty barcode will clear the screen of the patron
5604 you were last working with.</para>
5609 <section id="FilterBeforeOverdueReport">
5610 <title><link linkend="FilterBeforeOverdueReport">FilterBeforeOverdueReport</link></title>
5612 <para>Default: Don't require</para>
5614 <para>Asks: ___ staff to choose which checkouts to show before
5615 running the overdues report.</para>
5617 <para>Description:</para>
5621 <para>Koha's overdue report shows you all of the overdue items
5622 in your library system. If you have a large library system
5623 you'll want to set this preference to 'Require' to force those
5624 running the report to first limit the data generated to a
5625 branch, date range, patron category or other such filter.
5626 Requiring that the report be filtered before it's run prevents
5627 your staff from running a system heavy report and slowing down
5628 other operations in the system.</para>
5631 <screeninfo>Overdue Report Filters</screeninfo>
5635 <imagedata fileref="images/admin/globalprefs/FilterBeforeOverdueReport.png"/>
5642 <para>Values:</para>
5646 <para>Don't require</para>
5650 <para>Require</para>
5655 <section id="FineNotifyAtCheckin">
5656 <title><link linkend="FineNotifyAtCheckin">FineNotifyAtCheckin</link></title>
5658 <para>Default: Don't notify</para>
5660 <para>Asks: ___ librarians of overdue fines on the items they are
5663 <para>Values:</para>
5667 <para>Don't notify</para>
5675 <para>Description:</para>
5679 <para>With this preference set to 'Notify' all books that have
5680 overdue fines owed on them will pop up a warning when checking
5681 them in. This warning will need to acknowledged before you can
5682 continue checking items in. With this preference set to 'Don't
5683 notify,' you will still see fines owed on the patron record,
5684 you just won't have an additional notification at check
5688 <screeninfo>Fine notification at checkin</screeninfo>
5692 <imagedata fileref="images/admin/globalprefs/FineNotifyAtCheckin.png"/>
5700 <section id="DisplayClearScreenButton">
5701 <title><link linkend="DisplayClearScreenButton">DisplayClearScreenButton</link></title>
5703 <para>Default: Show</para>
5705 <para>Asks: ___ a button to clear the current patron from the
5706 screen on the circulation screen.</para>
5708 <para>Values:</para>
5712 <para>Don't show</para>
5715 <screeninfo>No X in the top right</screeninfo>
5719 <imagedata fileref="images/admin/globalprefs/DisplayClearScreenButtonOff.png"/>
5729 <screeninfo>X in the top right will clear the
5734 <imagedata fileref="images/admin/globalprefs/DisplayClearScreenButton.png"/>
5741 <section id="ExportRemoveFields">
5742 <title><link linkend="ExportRemoveFields">ExportRemoveFields</link></title>
5743 <para>Asks: The following fields should be excluded from the patron checkout history CSV
5744 or iso2709 export ___ </para>
5745 <para>Description:<itemizedlist>
5747 <para>This space separated list of fields (e.g. 100a 245b) will automatically be
5748 excluded when exporting the patron's current checkout history.</para>
5750 <screeninfo>ExportRemoveFields</screeninfo>
5753 <imagedata fileref="images/admin/globalprefs/ExportRemoveFields.png"/>
5758 </itemizedlist></para>
5760 <section id="ExportWithCsvProfile">
5761 <title><link linkend="ExportWithCsvProfile">ExportWithCsvProfile</link></title>
5762 <para>Asks: Use the ___ CSV profile when exporting patron checkout history</para>
5763 <para>Description:<itemizedlist>
5765 <para>Use this preference to define which <link linkend="csvprofiles">CSV
5766 profile</link> should be used when exporting patron's current checkout data.
5767 Enter the CSV Profile name as the value for this preference. If this preference
5768 is left blank you will not be able to export the patron's current checkout
5771 <screeninfo>ExportWithCsvProfile</screeninfo>
5774 <imagedata fileref="images/admin/globalprefs/ExportWithCsvProfile.png"/>
5779 </itemizedlist></para>
5781 <section id="HoldsToPullStartDate">
5782 <title><link linkend="HoldsToPullStartDate">HoldsToPullStartDate</link></title>
5783 <para>Default: 2</para>
5784 <para>Asks: Set the default start date for the Holds to pull list to ___ day(s) ago. </para>
5785 <para>Description:<itemizedlist>
5787 <para>The <link linkend="holdspull">Holds to Pull</link> report in circulation
5788 defaults to filtering holds placed 2 days ago. This preference allows you to set
5789 this default filter to any number of days.</para>
5791 </itemizedlist></para>
5793 <section id="itemBarcodeFallbackSearch">
5794 <title><link linkend="itemBarcodeFallbackSearch">itemBarcodeFallbackSearch</link></title>
5795 <para>Default: Don't enable</para>
5796 <para>Asks: ___ the automatic use of a keyword catalog search if the phrase entered as
5797 a barcode on the checkout page does not turn up any results during an item barcode
5799 <para>Values:</para>
5802 <para>Don't enable</para>
5807 <screeninfo>Checkout by keyword</screeninfo>
5810 <imagedata fileref="images/admin/globalprefs/itemBarcodeFallbackSearch.png"/>
5816 <para>Description:<itemizedlist>
5818 <para>Sometimes libraries want to checkout using something other than the barcode.
5819 Enabling this preference will do a keyword search of Koha to find the item
5820 you're trying to check out. You can use the call number, barcode, part of the
5821 title or anything you'd enter in the keyword search when this preference is
5822 enabled and Koha will ask you which item you're trying to check out.</para>
5824 </itemizedlist></para>
5826 <para>While you're not searching by barcode a barcode is required on every title you
5827 check out. Only titles with barcodes will appear in the search results.</para>
5831 <section id="itemBarcodeInputFilter">
5832 <title><link linkend="itemBarcodeInputFilter">itemBarcodeInputFilter</link></title>
5834 <para>Default: Don't filter</para>
5836 <para>Asks: ___ scanned item barcodes.</para>
5838 <para>Values:</para>
5842 <para>Convert from CueCat format</para>
5846 <para>Convert from Libsuite8 form</para>
5850 <para>Don't filter</para>
5854 <para>EAN-13 or zero-padded UPC-A from</para>
5858 <para>Remove spaces from</para>
5862 <para>Remove the first number from T-prefix style</para>
5866 <para>This format is common among those libraries
5867 migrating from Follett systems</para>
5874 <section id="NoticeCSS">
5875 <title><link linkend="NoticeCSS">NoticeCSS</link></title>
5877 <para>Asks: Include the stylesheet at ___ on Notices.<important>
5878 <para>This should be a complete URL, starting with
5882 <para>Description:</para>
5886 <para>If you would like to style your notices with a
5887 consistent set of fonts and colors you can use this preference
5888 to point Koha to a stylesheet specifically for your
5894 <section id="numReturnedItemsToShow">
5895 <title><link linkend="numReturnedItemsToShow">numReturnedItemsToShow</link></title>
5897 <para>Default: 20</para>
5899 <para>Asks : Show the ___ last returned items on the checkin
5903 <section id="previousIssuesDefaultSortOrder">
5904 <title><link linkend="previousIssuesDefaultSortOrder">previousIssuesDefaultSortOrder</link></title>
5906 <para>Default: earliest to latest</para>
5908 <para>Asks: Sort previous checkouts on the circulation page from
5909 ___ due date.</para>
5911 <para>Values:</para>
5915 <para>earliest to latest</para>
5919 <para>latest to earliest</para>
5924 <section id="RecordLocalUseOnReturn">
5925 <title><link linkend="RecordLocalUseOnReturn">RecordLocalUseOnReturn</link></title>
5927 <para>Default: Don't record</para>
5929 <para>Asks: ___ local use when an unissued item is checked
5932 <para>Values:</para>
5936 <para>Don't record</para>
5944 <para>Description:</para>
5948 <para>When this preference is set to "Don't record" you can
5949 record local use of items by checking items out to the
5950 statistical patron. With this preference set to "Record" you
5951 can record local use by checking out to the statistical patron
5952 and/or by checking in a book that is not currently checked
5957 <section id="ShowAllCheckins">
5958 <title><link linkend="ShowAllCheckins">ShowAllCheckins</link></title>
5959 <para>Default: Do not show</para>
5960 <para>Asks: ___ all items in the "Checked-in items" list, even items that were not
5962 <para>Values: <itemizedlist>
5964 <para>Do not show</para>
5969 </itemizedlist>Description:<itemizedlist>
5971 <para>When items that are not currently checked out are checked in they don't show
5972 on the list of checked in items. This preference allows you to choose how you'd
5973 like the log of checked in items displays.</para>
5975 </itemizedlist></para>
5978 <section id="SpecifyDueDate">
5979 <title><link linkend="SpecifyDueDate">SpecifyDueDate</link></title>
5981 <para>Default: Allow</para>
5983 <para>Asks: ___ staff to specify a due date for a checkout.</para>
5985 <para>Due dates are calculated using your circulation and fines
5986 rules, but staff can override that if you allow them to specify a
5987 due date at checkout.</para>
5989 <para>Description:</para>
5993 <para>This preference allows for circulation staff to change a
5994 due date from the automatic due date to another calendar date.
5995 This option would be used for circumstances in which the due
5996 date may need to be decreased or extended in a specific
5997 circumstance. The "Allow" setting would allow for this option
5998 to be utilized by staff, the "Don't allow" setting would bar
5999 staff from changing the due date on materials.</para>
6003 <para>Values:</para>
6010 <screeninfo>Specify Due Date Box Shows</screeninfo>
6014 <imagedata fileref="images/admin/globalprefs/SpecifyDueDate.png"/>
6021 <para>Don't allow</para>
6024 <screeninfo>Specify Due Date Box Doesn't Show</screeninfo>
6028 <imagedata fileref="images/admin/globalprefs/SpecifyDueDate-no.png"/>
6035 <section id="SpecifyReturnDate">
6036 <title><link linkend="SpecifyReturnDate">SpecifyReturnDate</link></title>
6037 <para>Default: Don't allow</para>
6038 <para>Asks: ___ staff to specify a return date for a check in.</para>
6039 <para>Values:<itemizedlist>
6041 <para>Allow<screenshot>
6042 <screeninfo>Allow return date edits</screeninfo>
6045 <imagedata fileref="images/admin/globalprefs/SpecifyReturnDate.png"/>
6048 </screenshot></para>
6051 <para>Don't allow<screenshot>
6052 <screeninfo>Don't allow return date edits</screeninfo>
6055 <imagedata fileref="images/admin/globalprefs/SpecifyReturnDate-no.png"/>
6058 </screenshot></para>
6060 </itemizedlist></para>
6061 <para>Description:<itemizedlist>
6063 <para>This preference lets you decide if staff can specify an arbitrary return
6064 date when checking in items.</para>
6066 </itemizedlist></para>
6069 <section id="todaysIssuesDefaultSortOrder">
6070 <title><link linkend="todaysIssuesDefaultSortOrder">todaysIssuesDefaultSortOrder</link></title>
6072 <para>Default: latest to earliest</para>
6074 <para>Asks: Sort today's checkouts on the circulation page from
6075 ___ due date.</para>
6077 <para>Values:</para>
6081 <para>earliest to latest</para>
6085 <para>latest to earliest</para>
6090 <section id="UpdateTotalIssuesOnCirc">
6091 <title><link linkend="UpdateTotalIssuesOnCirc">UpdateTotalIssuesOnCirc</link></title>
6093 <para>Default: Do not</para>
6095 <para>Asks: ___ update a bibliographic record's total issues count
6096 whenever an item is issued</para>
6098 <para>Values:</para>
6103 <para>This increases server load significantly; if
6104 performance is a concern, use the <link linkend="updateissuescron">cron job</link> to update the
6105 total issues count instead.</para>
6114 <para>Description:</para>
6118 <para>Koha can track the number of times and item is checked
6119 out and store that on the item record in the database. This
6120 information is not stored by default. Setting this preference
6121 to 'Do' will tell Koha to track that info everytime the item
6122 is checked out in real time. Otherwise you could use the <link linkend="updateissuescron">cron job</link> to have Koha update
6123 that field nightly.</para>
6128 <section id="WaitingNotifyAtCheckin">
6129 <title><link linkend="WaitingNotifyAtCheckin">WaitingNotifyAtCheckin</link></title>
6131 <para>Default: Don't notify</para>
6133 <para>Asks: ___ librarians of waiting holds for the patron whose
6134 items they are checking in.</para>
6136 <para>Values:</para>
6140 <para>Don't notify</para>
6147 <screeninfo>Notification that a hold is waiting</screeninfo>
6151 <imagedata fileref="images/admin/globalprefs/WaitingNotifyAtCheckin.png"/>
6158 <para>Description:</para>
6162 <para>When checking in books you can choose whether or not to
6163 have a notice pop up if the patron who returned the book has a
6164 hold waiting for pick up. If you choose 'Notify' for
6165 WaitingNotifyAtCheckin then every time a hold is found for the
6166 patron who had the book out last a message will appear on your
6167 check in screen.</para>
6173 <section id="circscoprefs">
6174 <title><link linkend="circscoprefs">Self Checkout</link></title>
6178 <section id="AllowSelfCheckReturns">
6179 <title><link linkend="AllowSelfCheckReturns">AllowSelfCheckReturns</link></title>
6181 <para>Default: Don't allow</para>
6183 <para>Asks: ___ patrons to return items through web-based self
6184 checkout system.</para>
6186 <para>Values:</para>
6194 <para>Don't allow</para>
6198 <para>Description:</para>
6202 <para>This preference is used to determine if you want patrons
6203 to be allowed to return items through your self check
6204 machines. By default Koha's self check interface is simply for
6205 checking items out.</para>
6210 <section id="AutoSelfCheckAllowed">
6211 <title><link linkend="AutoSelfCheckAllowed">AutoSelfCheckAllowed, AutoSelfCheckID &
6212 AutoSelfCheckPass</link></title>
6215 <para>Most libraries will want to leave this set to 'Don't
6216 allow.' This preference turns off the requirement to log into
6217 the self checkout machine with a staff username and password by
6218 storing the username and password for automatic login.</para>
6221 <para>AutoSelfCheckAllowed Default: Don't allow</para>
6223 <para>Asks: ___ the web-based self checkout system to
6224 automatically login with this staff login ___ and this password
6227 <para>AutoSelfCheckAllowed Values:</para>
6235 <para>Don't allow</para>
6239 <para>AutoSelfCheckID Value:<itemizedlist>
6241 <para>The username of a staff patron with 'circulate' <link linkend="patronpermissions">permissions</link>.</para>
6243 </itemizedlist></para>
6245 <para>AutoSelfCheckPass Value:<itemizedlist>
6247 <para>The password of a staff patron with 'circulate' <link linkend="patronpermissions">permissions</link>.</para>
6249 </itemizedlist></para>
6251 <section id="SCOUserCSS">
6252 <title><link linkend="SCOUserCSS">SCOUserCSS</link></title>
6253 <para>Asks: Include the following CSS on all pages in the web-based self checkout</para>
6254 <para>Description:<itemizedlist>
6256 <para>The CSS entered in this preference will be used on all of your Koha self
6257 checkout screens.</para>
6259 </itemizedlist></para>
6261 <section id="SCOUserJS">
6262 <title><link linkend="SCOUserJS">SCOUserJS</link></title>
6263 <para>Asks: Include the following JavaScript on all pages in the web-based self
6265 <para>Description:<itemizedlist>
6267 <para>The JavaScript entered in this preference will effect all of your Koha self
6268 checkout screens.</para>
6270 </itemizedlist></para>
6273 <section id="SelfCheckHelpMessage">
6274 <title><link linkend="SelfCheckHelpMessage">SelfCheckHelpMessage</link></title>
6276 <para>Asks: Include the following HTML in the Help page of the
6277 web-based self checkout system</para>
6279 <para>Description:</para>
6283 <para>Clicking the 'Help' link in the top right of the self
6284 checkout interface opens up a three step process for using the
6285 self check interface. Adding HTML to this system preference
6286 will print that additional help text above what's already
6292 <section id="SelfCheckoutByLogin">
6293 <title><link linkend="SelfCheckoutByLogin">SelfCheckoutByLogin</link></title>
6295 <para>Default: Barcode</para>
6297 <para>Asks: Have patrons login into the web-based self checkout
6298 system with their ___</para>
6300 <para>Values:</para>
6304 <para>Barcode</para>
6307 <screeninfo>Self Checkout Patron Card Number</screeninfo>
6311 <imagedata fileref="images/circ/selfcheckout.png"/>
6318 <para>Username and password</para>
6321 <screeninfo>Shelf checkout by login</screeninfo>
6325 <imagedata fileref="images/circ/SelfCheckoutByLogin.png"/>
6332 <para>Description:</para>
6336 <para>This preference lets you decide how your patrons will
6337 log in to the self checkout machine. Barcode is the patron's
6338 card number and their username and password is set using the
6339 opac/staff username and password fields on the patron
6344 <section id="SelfCheckReceiptPrompt">
6345 <title><link linkend="SelfCheckReceiptPrompt">SelfCheckReceiptPrompt</link></title>
6346 <para>Default: Show</para>
6347 <para>Asks: ___ the print receipt popup dialog when self checkout is finished.</para>
6348 <para>Values:<itemizedlist>
6350 <para>Don't show</para>
6355 </itemizedlist></para>
6356 <para>Description:<itemizedlist>
6358 <para>This preference controls whether a prompt shows up on the web based self
6359 check out when the patron clicks the 'Finish' button.</para>
6361 </itemizedlist></para>
6364 <section id="SelfCheckTimeout">
6365 <title><link linkend="SelfCheckTimeout">SelfCheckTimeout</link></title>
6367 <para>Default: 120</para>
6369 <para>Asks: Time out the current patron's web-based self checkout
6370 system login after ___ seconds.</para>
6372 <para>Description:</para>
6376 <para>After the machine is idle for the time entered in this
6377 preference the self check out system will log out the current
6378 patron and return to the starting screen.</para>
6383 <section id="ShowPatronImageInWebBasedSelfCheck">
6384 <title><link linkend="ShowPatronImageInWebBasedSelfCheck">ShowPatronImageInWebBasedSelfCheck</link></title>
6386 <para>Default: Don't show</para>
6388 <para>Asks: ___ the patron's picture (if one has been added) when
6389 they use the web-based self checkout.</para>
6391 <para>Values:</para>
6395 <para>Don't show</para>
6404 <section id="WebBasedSelfCheck">
6405 <title><link linkend="WebBasedSelfCheck">WebBasedSelfCheck</link></title>
6407 <para>Default: Don't enable</para>
6409 <para>Asks: ___ the web-based self checkout system.</para>
6411 <para>Values:</para>
6415 <para>Don't enable</para>
6423 <para>Enabling this preference will allow access to the <link linkend="selfcheckout">self checkout</link> module in Koha.</para>
6430 <section id="enhancedcontent">
6431 <title><link linkend="enhancedcontent">Enhanced Content</link></title>
6433 <para><emphasis>Get there:</emphasis> More > Administration >
6434 Global System Preferences > Enhanced Content</para>
6437 <para>Always read the terms of service associated with external data
6438 sources to be sure that you are using the products within the
6439 allowed limits.</para>
6443 <para>You cannot have more than one service for cover images
6444 (including local cover images) set up. If you set up more than one
6445 you will get multiple cover images. Instead choose only one source
6446 for cover images.</para>
6449 <section id="frbrenhancedprefs">
6450 <title><link linkend="frbrenhancedprefs">All</link></title>
6454 <section id="FRBRizeEditions">
6455 <title><link linkend="FRBRizeEditions">FRBRizeEditions</link></title>
6457 <para>Default: Don't show</para>
6459 <para>Asks: ___ other editions of an item on the staff
6462 <para>Values:</para>
6466 <para>Don't show</para>
6473 <screeninfo>Editions tab in staff client</screeninfo>
6477 <imagedata fileref="images/admin/globalprefs/editionstab.png"/>
6484 <para>Description:</para>
6488 <para>Using the rules set forth in the Functional Requirements for Bibliographic
6489 records, this option, when enabled, pulls all editions of the same title available
6490 in your collection regardless of material type. Items will appear under an
6491 'Editions' tab on the detail page for the title in question.. According to
6492 <emphasis>Libraries Unlimited's Online Dictionary for Library and Information
6493 Science</emphasis> (<ulink url="http://lu.com/odlis/">http://lu.com/odlis/</ulink>), FRBRizing the catalog involves collating MARC
6494 records of similar materials. FRBRization brings together entities (sets of Works,
6495 Expressions, or Manifestations), rather than just sets of Items. It can aid
6496 patrons in selecting related items, expressions, and manifestations that will
6497 serve their needs. When it is set to "Show", the OPAC will query one or more ISBN
6498 web services for associated ISBNs and display an Editions tab on the details
6499 pages. Once this preference is enabled, the library must select one of the ISBN
6500 options (<link linkend="ThingISBN">ThingISBN</link> and/or <link linkend="XISBN">XISBN</link>). This option is only for the Staff Client; the <link linkend="OPACFRBRizeEditions">OPACFRBRizeEditions</link> option must be enabled
6501 to have the Editions tab appear on the OPAC.</para>
6506 <para>Requires that you turn on one or more of the ISBN services (<link linkend="ThingISBN">ThingISBN</link> and/or <link linkend="XISBN">XISBN</link>)</para>
6510 <section id="OPACFRBRizeEditions">
6511 <title><link linkend="OPACFRBRizeEditions">OPACFRBRizeEditions</link></title>
6513 <para>Default: Don't show</para>
6515 <para>Asks: ___ other editions of an item on the OPAC.</para>
6517 <para>Description:</para>
6521 <para>Using the rules set forth in the Functional Requirements for Bibliographic
6522 records, this option, when enabled, pulls all editions of the same title available
6523 in your collection regardless of material type. Items will appear under an
6524 'Editions' tab on the detail page for the title in question.. According to
6525 <emphasis>Libraries Unlimited's Online Dictionary for Library and Information
6526 Science</emphasis> (<ulink url="http://lu.com/odlis/">http://lu.com/odlis/</ulink>), FRBRizing the catalog involves collating MARC
6527 records of similar materials. FRBRization brings together entities (sets of Works,
6528 Expressions, or Manifestations), rather than just sets of Items. It can aid
6529 patrons in selecting related items, expressions, and manifestations that will
6530 serve their needs. When it is set to "Show", the OPAC will query one or more ISBN
6531 web services for associated ISBNs and display an Editions tab on the details
6532 pages. Once this preference is enabled, the library must select one of the ISBN
6533 options (<link linkend="ThingISBN">ThingISBN</link> and/or <link linkend="XISBN">XISBN</link>). This option is only for the OPAC; the <link linkend="FRBRizeEditions">FRBRizeEditions</link> option must be turned "On" to
6534 have the Editions tab appear on the Staff Client.</para>
6538 <para>Values:</para>
6542 <para>Don't show</para>
6549 <screeninfo>Editions tab in the OPAC</screeninfo>
6553 <imagedata fileref="images/admin/globalprefs/editions.png"/>
6560 <para>This preference pulls all editions of the same title
6561 available in your collection regardless of material type. Items
6562 will appear under an 'Editions' tab on the detail page for the
6563 title in question.</para>
6566 <para>Requires that you turn on one or more of the ISBN services (<link linkend="ThingISBN">ThingISBN</link> and/or <link linkend="XISBN">XISBN</link>)</para>
6571 <section id="amazonprefs">
6572 <title><link linkend="amazonprefs">Amazon</link></title>
6576 <section id="AmazonAssocTag">
6577 <title><link linkend="AmazonAssocTag">AmazonAssocTag</link></title>
6579 <para>Asks: Put the associate tag ___ on links to Amazon.</para>
6582 <para>This can net your library referral fees if a patron
6583 decides to buy an item after clicking through to Amazon from
6587 <para>Description:</para>
6591 <para>An Amazon Associates Tag allows a library to earn a
6592 percentage of all purchases made on Amazon when a patron
6593 accesses Amazon's site via links on the library's website.
6594 More information about the Amazon Associates program is
6595 available at Amazon's Affiliate Program's website, <ulink url="https://affiliate-program.amazon.com/">https://affiliate-program.amazon.com/</ulink>.
6596 Before a tag can be obtained, however, the library must first
6597 apply for an Amazon Web Services (AWS) account. Applications
6598 are free of charge and can be made at <ulink url="http://aws.amazon.com">http://aws.amazon.com</ulink>.
6599 Once an AWS account has been established, the library can then
6600 obtain the Amazon Associates Tag.</para>
6604 <para>Sign up at: <ulink url="https://affiliate-program.amazon.com/">https://affiliate-program.amazon.com/</ulink></para>
6607 <section id="AmazonCoverImages">
6608 <title><link linkend="AmazonCoverImages">AmazonCoverImages</link></title>
6610 <para>Default: Don't show</para>
6612 <para>Asks: ___ cover images from Amazon on search results and
6613 item detail pages on the staff interface.</para>
6615 <para>Values:</para>
6619 <para>Don't show</para>
6627 <para>Description:</para>
6631 <para>This preference makes it possible to either allow or
6632 prevent Amazon cover images from being displayed in the Staff
6633 Client. Cover images are retrieved by Amazon, which pulls the
6634 content based on the first ISBN number in the item's MARC
6635 record. Amazon offers this service free of charge. If the
6636 value for this preference is set to "Show", the cover images
6637 will appear in the Staff Client, and if it is set to "Don't
6638 show", the images will not appear. Finally, if you're using
6639 Amazon cover images, all other cover image services must be
6640 disabled. If they are not disabled, they will prevent
6641 AmazonCoverImages from functioning properly.</para>
6646 <section id="AmazonLocale">
6647 <title><link linkend="AmazonLocale">AmazonLocale</link></title>
6649 <para>Default: American</para>
6651 <para>Asks: Use Amazon data from its ___ website.</para>
6657 <para>American</para>
6661 <para>British</para>
6665 <para>Canadian</para>
6677 <para>Japanese</para>
6682 <section id="OPACAmazonCoverImages">
6683 <title><link linkend="OPACAmazonCoverImages">OPACAmazonCoverImages</link></title>
6685 <para>Default: Don't show</para>
6687 <para>Asks: ___ cover images from Amazon on search results and
6688 item detail pages on the OPAC.</para>
6690 <para>Values:</para>
6694 <para>Don't show</para>
6702 <para>Description:</para>
6706 <para>This preference makes it possible to either allow or
6707 prevent Amazon cover images from being displayed in the OPAC.
6708 Cover images are retrieved by Amazon, which pulls the content
6709 based on the first ISBN number in the item's MARC record.
6710 Amazon offers this service free of charge. If the value for
6711 this preference is set to "Show", the cover images will appear
6712 in the OPAC, and if it is set to "Don't show", the images will
6713 not appear. Finally, if you're using Amazon cover images, all
6714 other cover image services must be disabled. If they are not
6715 disabled, they will prevent AmazonCoverImages from functioning
6722 <section id="Babelthequeprefs">
6723 <title><link linkend="Babelthequeprefs">Babelthèque</link></title>
6727 <section id="Babeltheque">
6728 <title><link linkend="Babeltheque">Babeltheque</link></title>
6730 <para>Default: Don't</para>
6732 <para>Asks: ___ include information (such as reviews and
6733 citations) from Babelthèque in item detail pages on the
6736 <para>Description:</para>
6740 <para>This preference makes it possible to display a
6741 Babeltheque tab in the OPAC, allowing patrons to access tags,
6742 reviews, and additional title information provided by
6743 Babeltheque. The information which Babeltheque supplies is
6744 drawn from the French language-based <ulink url="http://www.babelio.com/">Babelio.com</ulink>, a French
6745 service similar to LibraryThing for Libraries. More
6746 information about Babeltheque is available through its
6747 website, <ulink url="http://www.babeltheque.com/">http://www.babeltheque.com</ulink>.
6748 Libraries that wish to allow access to this information must
6749 first register for the service at <ulink url="http://www.babeltheque.com">http://www.babeltheque.com</ulink>.
6750 Please note that this information is only provided in
6755 <para>Values:</para>
6762 <screeninfo>Data from Babelthèque on the bib
6767 <imagedata fileref="images/admin/globalprefs/Babeltheque.png"/>
6779 <section id="Babeltheque_url_js">
6780 <title><link linkend="Babeltheque_url_js">Babeltheque_url_js</link></title>
6782 <para>Asks: ___ Defined the url for the Babeltheque javascript
6783 file (eg. http://www.babeltheque.com/bw_XX.js)</para>
6786 <section id="Babeltheque_url_update">
6787 <title><link linkend="Babeltheque_url_update">Babeltheque_url_update</link></title>
6789 <para>Asks: ___ Defined the url for the Babeltheque update
6791 http://www.babeltheque.com/.../file.csv.bz2).</para>
6795 <section id="btcontentprefs">
6796 <title><link linkend="btcontentprefs">Baker & Taylor</link></title>
6799 <para>This is a pay service, you must contact Baker & Taylor
6800 to subscribe to this service before setting these options.</para>
6803 <section id="BakerTaylorEnabled">
6804 <title><link linkend="BakerTaylorEnabled">BakerTaylorEnabled</link></title>
6806 <para>Default: Don't add</para>
6808 <para>Asks: ___ Baker and Taylor links and cover images to the
6809 OPAC and staff client. This requires that you have entered in a
6810 username and password (which can be seen in image links).</para>
6812 <para>Values:</para>
6820 <para>Don't add</para>
6824 <para>Description:</para>
6828 <para>This preference makes it possible to display Baker &
6829 Taylor content (book reviews, descriptions, cover images,
6830 etc.) in both the Staff Client and the OPAC. Libraries that
6831 wish to display Baker & Taylor content must first register
6832 and pay for this service with Baker & Taylor (<ulink url="http://www.btol.com">http://www.btol.com</ulink>). If
6833 Baker & Taylor content is enabled be sure to turn off
6834 other cover and review services to prevent
6835 interference.</para>
6840 <para>To use this you will need to also set the <link linkend="btuserpass">BakerTaylorUsername &
6841 BakerTaylorPassword</link> system preferences</para>
6845 <section id="BakerTaylorBookstoreURL">
6846 <title><link linkend="BakerTaylorBookstoreURL">BakerTaylorBookstoreURL</link></title>
6848 <para>Asks: Baker and Taylor "My Library Bookstore" links should
6849 be accessed at https:// ___ isbn</para>
6851 <para>Description:</para>
6855 <para>Some libraries generate additional funding for the
6856 library by selling books and other materials that are
6857 purchased from or have been previously leased from Baker &
6858 Taylor. These materials can be accessed via a link on the
6859 library's website. This service is often referred to as "My
6860 Library Bookstore." In order to participate in this program,
6861 the library must first register and pay for the service with
6862 Baker & Taylor. Additional information about this and
6863 other services provided by Baker & Taylor is available at
6864 the Baker & Taylor website, <ulink url="http://www.btol.com">http://www.btol.com</ulink>. The
6865 BakerTaylorBookstoreURL preference establishes the URL in
6866 order to link to the library's Baker & Taylor-backed
6867 online bookstore, if such a bookstore has been established.
6868 The default for this field is left blank; if no value is
6869 entered, the links to My Library Bookstore will remain
6870 inactive. If enabling this preference, enter the library's
6871 Hostname and Parent Number in the appropriate location within
6872 the URL. The "key" value (key=) should be appended to the URL,
6873 and https:// should be prepended.</para>
6877 <para>This should be filled in with something like
6878 koha.mylibrarybookstore.com/MLB/actions/searchHandler.do?nextPage=bookDetails&parentNum=10923&key=</para>
6881 <para>Leave it blank to disable these links.</para>
6885 <para>Be sure to get this information from Baker & Taylor
6886 when subscribing.</para>
6890 <section id="btuserpass">
6891 <title><link linkend="btuserpass">BakerTaylorUsername & BakerTaylorPassword</link></title>
6893 <para>Asks: Access Baker and Taylor using username ___ and
6896 <para>Descriptions:</para>
6900 <para>This setting in only applicable if the library has a
6901 paid subscription to the external Content Café service from
6902 Baker & Taylor. Use the box provided to enter in the
6903 library's Content Café username and password. Also, ensure
6904 that the <link linkend="BakerTaylorBookstoreURL">BakerTaylorBookstoreURL</link>
6905 and <link linkend="BakerTaylorEnabled">BakerTaylorEnabled</link>
6906 settings are properly set. The Content Café service is a feed
6907 of enhanced content such as cover art, professional reviews,
6908 and summaries that is displayed along with Staff Client/OPAC
6909 search results. For more information on this service please
6910 see the Baker & Taylor website: <ulink url="http://www.btol.com">http://www.btol.com</ulink></para>
6915 <para>Be sure to get this information from Baker & Taylor
6916 when subscribing.</para>
6920 <section id="coceimages">
6921 <title><link linkend="coceimages">Coce Cover images cache</link></title>
6922 <para>Coce is a remote image URL cache. With this option, cover images are not fetched
6923 directly from Amazon, Google, and so on. Their URLs are requested via a web service to
6924 Coce which manages a cache of URLs. </para>
6926 <title><link linkend="Coce">Coce</link></title>
6927 <para>Default: Don't enable</para>
6928 <para>Asks: ___ a Coce image cache service.</para>
6929 <para>Values:<itemizedlist>
6931 <para>Don't enable</para>
6936 </itemizedlist></para>
6937 <para>Description: <itemizedlist>
6939 <para>Coce has many benefits when it comes to choosing and displaying cover images
6940 in Koha:<itemizedlist>
6942 <para>If a book cover is not available from a provider, but is available
6943 from another one, Koha will be able to display a book cover, which isn't
6944 the case now </para>
6947 <para>Since URLs are cached, it isn't necessary for each book cover to
6948 request, again and again, the provider, and several of them if necessary.
6952 <para>Amazon book covers are retrieved with Amazon Product Advertising API,
6953 which means that more covers are retrieved (ISBN13).</para>
6955 </itemizedlist><important>
6956 <para>Coce does not come bundled with Koha. Your Koha install with not already
6957 have a Coce server set up. Before enabling this functionality you will want
6958 to be sure to have a Coce server set up. Instructions on installing and
6959 setting up Coce can be found on the official github page at <ulink url="https://github.com/fredericd/coce">https://github.com/fredericd/coce</ulink>.</para>
6962 </itemizedlist></para>
6964 <section id="CoceHost">
6965 <title><link linkend="CoceHost">CoceHost</link></title>
6966 <para>Asks: Coce server URL ___</para>
6967 <para>Description:<itemizedlist>
6969 <para>This will be the full URL (starting with http://) to your Coce server.
6972 </itemizedlist></para>
6974 <section id="CoceProviders">
6975 <title><link linkend="CoceProviders">CoceProviders</link></title>
6976 <para>Asks: Use the following providers to fetch the covers ___</para>
6977 <para>Values:<itemizedlist>
6979 <para>[Select all]</para>
6982 <para>Amazon Web Services</para>
6985 <para>Google Books</para>
6988 <para>Open Library</para>
6990 </itemizedlist></para>
6991 <para>Description:<itemizedlist>
6993 <para>The providers chosen here will be used to gather cover images for display in
6994 your Koha catalog.</para>
6996 </itemizedlist></para>
7000 <section id="googleprefs">
7001 <title><link linkend="googleprefs">Google</link></title>
7005 <section id="GoogleJackets">
7006 <title><link linkend="GoogleJackets">GoogleJackets</link></title>
7008 <para>Default: Don't add</para>
7010 <para>Asks: ___ cover images from Google Books to search results
7011 and item detail pages on the OPAC.</para>
7013 <para>Values:</para>
7021 <para>Don't add</para>
7025 <para>Description:</para>
7029 <para>This setting controls the display of applicable cover
7030 art from the free Google Books database, via the Google Books
7031 API. Please note that to use this feature, all other cover
7032 services should be turned off.</para>
7037 <section id="html5">
7038 <title><link linkend="html5">HTML5 Media</link></title>
7039 <section id="HTML5MediaEnabled">
7040 <title><link linkend="HTML5MediaEnabled">HTML5MediaEnabled</link></title>
7041 <para>Default: not at all</para>
7042 <para>Asks: Show a tab with a HTML5 media player for files catalogued in field 856
7044 <para>Values:<itemizedlist>
7046 <para>in OPAC and staff client</para>
7049 <para>in the OPAC</para>
7051 <screeninfo>HTML5 Media in the OPAC</screeninfo>
7054 <imagedata fileref="images/admin/globalprefs/HTML5MediaEnabled-opac.png"/>
7060 <para>in the staff client</para>
7062 <screeninfo>HTML5 Media in the staff client</screeninfo>
7065 <imagedata fileref="images/admin/globalprefs/HTML5MediaEnabled-staff.png"/>
7071 <para>not at all</para>
7073 </itemizedlist></para>
7074 <para>Description:<itemizedlist>
7076 <para>If you have media elements in the 856 of your MARC record this preference
7077 can run/show those media files in a separate tab using HTML5.</para>
7079 </itemizedlist></para>
7081 <section id="HTML5MediaExtensions">
7082 <title><link linkend="HTML5MediaExtensions">HTML5MediaExtensions</link></title>
7083 <para>Default: webm|ogg|ogv|oga|vtt</para>
7084 <para>Asks: Media file extensions ___</para>
7085 <para>Description:<itemizedlist>
7087 <para>Enter in file extensions separated with bar (|)</para>
7089 </itemizedlist></para>
7092 <section id="HTML5MediaYouTube">
7093 <title><link linkend="HTML5MediaYouTube">HTML5MediaYouTube</link></title>
7094 <para>Default: Don't embed</para>
7096 <para>To turn this on first enable <link linkend="HTML5MediaEnabled">HTML5MediaEnabled</link></para>
7097 </important>Asks: ___ YouTube links as videos.</para>
7098 <para>Values: <itemizedlist>
7100 <para>Don't embed</para>
7105 </itemizedlist></para>
7106 <para>Description:<itemizedlist>
7108 <para>This preference will allow MARC21 856$u that points to YouTube to appear as a
7109 playable video on the pages defined in <link linkend="HTML5MediaEnabled">HTML5MediaEnabled</link>.</para>
7111 </itemizedlist></para>
7113 <section id="IDreamLibraries">
7114 <title><link linkend="IDreamLibraries">IDreamLibraries</link></title>
7115 <para><ulink url="http://idreambooks.com/">IDreamBooks.com</ulink> aggregates book reviews
7116 by critics to help you discover the very best of what's coming out each week. These
7117 preferences let you integrated content from <ulink url="http://IDreamBooks.com">IDreamBooks.com</ulink> in to your Koha OPAC. <note>
7118 <para>This is a new website and has limited content, so you may only see these
7119 features on new popular titles until the database grows some more.</para>
7121 <section id="IDreamBooksReadometer">
7122 <title><link linkend="IDreamBooksReadometer">IDreamBooksReadometer</link></title>
7123 <para>Default: Don't add</para>
7124 <para>Asks: ___ a "Readometer" that summarizes the reviews gathered by IDreamBooks.com
7125 to the OPAC details page. </para>
7126 <para>Values:<itemizedlist>
7130 <screeninfo>Readometer on the details page</screeninfo>
7133 <imagedata fileref="images/admin/globalprefs/IDreamBooksReadometer.png"/>
7139 <para>Don't add</para>
7141 </itemizedlist></para>
7143 <section id="IDreamBooksResults">
7144 <title><link linkend="IDreamBooksResults">IDreamBooksResults</link></title>
7145 <para>Default: Don't add</para>
7146 <para>Asks: ___ the rating from IDreamBooks.com to OPAC search results. </para>
7147 <para>Values:<itemizedlist>
7151 <screeninfo>iDreamBooks rating on search results</screeninfo>
7154 <imagedata fileref="images/admin/globalprefs/IDreamBooksResults.png"/>
7160 <para>Don't add</para>
7162 </itemizedlist></para>
7164 <section id="IDreamBooksReviews">
7165 <title><link linkend="IDreamBooksReviews">IDreamBooksReviews</link></title>
7166 <para>Default: Don't add</para>
7167 <para>Asks: ___ a tab on the OPAC details with book reviews from critics aggregated by
7168 IDreamBooks.com. </para>
7169 <para>Values:<itemizedlist>
7173 <screeninfo>Reviews tab on the detail page</screeninfo>
7176 <imagedata fileref="images/admin/globalprefs/IDreamBooksReviews.png"/>
7182 <para>Don't add</para>
7184 </itemizedlist></para>
7188 <section id="librarythingprefs">
7189 <title><link linkend="librarythingprefs">LibraryThing</link></title>
7191 <para>LibraryThing for Libraries is a pay service. You must first
7192 contact LibraryThing directly for pricing and subscription
7193 information. Learn more at <ulink url="http://www.librarything.com/forlibraries">http://www.librarything.com/forlibraries</ulink>.
7194 Also, for further configuration instructions please see the
7195 LibraryThing Wiki: <ulink url="http://www.librarything.com/wiki/index.php/Koha">http://www.librarything.com/wiki/index.php/Koha</ulink></para>
7197 <section id="LibraryThingForLibrariesEnabled">
7198 <title><link linkend="LibraryThingForLibrariesEnabled">LibraryThingForLibrariesEnabled</link></title>
7200 <para>Default: Don't show</para>
7202 <para>Asks: ___ reviews, similar items, and tags from Library
7203 Thing for Libraries on item detail pages on the OPAC.</para>
7205 <para>Values:</para>
7209 <para>Don't show</para>
7217 <para>Description:</para>
7221 <para>This setting is only applicable if the library has a
7222 paid subscription to the external LibraryThing for Libraries
7223 service. This service can provide patrons with the display of
7224 expanded information on catalog items such as book
7225 recommendations. It also can offer advanced features like
7226 tagged browsing, patron written reviews, and a virtual library
7227 display accessed from the details tab.</para>
7232 <para>If this is set to 'show' you will need to enter a value in
7233 the '<link linkend="LibraryThingForLibrariesID">LibraryThingForLibrariesID</link>'
7234 system preference.</para>
7238 <section id="LibraryThingForLibrariesID">
7239 <title><link linkend="LibraryThingForLibrariesID">LibraryThingForLibrariesID</link></title>
7241 <para>Asks: Access Library Thing for Libraries using the customer
7244 <para>Description:</para>
7248 <para>This setting is only applicable if the library has a
7249 paid subscription to the external LibraryThing for Libraries
7250 service. Use the box provided to enter in the library's
7251 LibraryThing for Libraries ID as provided to the library by
7252 LibraryThing. The ID number is a series of numbers in the form
7253 ###-#########, and can be found on the library's account page
7254 at LibraryThing for Libraries. This service can provide
7255 patrons with the display of expanded information on catalog
7256 items such as book recommendations and cover art. It also can
7257 offer advanced features like tagged browsing, patron written
7258 reviews, and a virtual library display accessed from the
7264 <section id="LibraryThingForLibrariesTabbedView">
7265 <title><link linkend="LibraryThingForLibrariesTabbedView">LibraryThingForLibrariesTabbedView</link></title>
7267 <para>Default: in line with bibliographic information</para>
7269 <para>Asks: Show Library Thing for Libraries content ___</para>
7271 <para>Values:</para>
7275 <para>in line with bibliographic information</para>
7279 <para>in tabs</para>
7283 <para>Description:</para>
7287 <para>This setting is only applicable if the library has a
7288 paid subscription to the external LibraryThing for Libraries
7289 service. This service can provide patrons with the display of
7290 expanded information on catalog items such as book
7291 recommendations and cover art. It also can offer advanced
7292 features like tagged browsing, patron written reviews, and a
7293 virtual library display accessed from the details tab.</para>
7297 <section id="ThingISBN">
7298 <title><link linkend="ThingISBN">ThingISBN</link></title>
7299 <para>Default: Don't use</para>
7300 <para>Asks: ___ the ThingISBN service to show other editions of a title</para>
7301 <para>Values:</para>
7304 <para>Don't use</para>
7310 <para>Description:</para>
7313 <para>Set to 'Use' to display an "Editions" tab on the item's detail page. Editions
7314 are listed, complete with cover art (if you have one of the cover services
7315 enabled) and bibliographic information. The feed comes from LibraryThing's
7316 ThingISBN web service. This is a free service to non-commercial sites with fewer
7317 than 1,000 requests per day.</para>
7321 <para>Requires <link linkend="FRBRizeEditions">FRBRizeEditions</link> and/or <link linkend="OPACFRBRizeEditions">OPACFRBRizeEditions</link> set to 'show'</para>
7324 <para>This is separate from Library Thing for Libraries and does not have a cost
7325 associated with it.</para>
7330 <section id="localimages">
7331 <title><link linkend="localimages">Local Cover Images</link></title>
7335 <section id="AllowMultipleCovers">
7336 <title><link linkend="AllowMultipleCovers">AllowMultipleCovers</link></title>
7338 <para>Default: Don't allow</para>
7340 <para>Asks: ___ multiple images to be attached to each
7341 bibliographic record.</para>
7343 <para>Values:</para>
7351 <para>Don't allow</para>
7355 <para>Description:</para>
7359 <para>If this preference is set to 'Allow' then you can upload
7360 multiple images that will appear in the images tab on the bib
7361 record in the OPAC and the staff client. This preference
7362 requires that either one or both <link linkend="LocalCoverImages">LocalCoverImages</link> and <link linkend="OPACLocalCoverImages">OPACLocalCoverImages</link> are
7363 set to 'Display.'</para>
7366 <screeninfo>Multiple cover images</screeninfo>
7370 <imagedata fileref="images/admin/globalprefs/AllowMultipleCovers.png"/>
7378 <section id="LocalCoverImages">
7379 <title><link linkend="LocalCoverImages">LocalCoverImages</link></title>
7381 <para>Default: Don't display</para>
7383 <para>Asks: ___ local cover images on intranet search and details
7386 <para>Values:</para>
7390 <para>Display</para>
7394 <para>Don't display</para>
7398 <para>Description:</para>
7402 <para>Setting this preference to 'Display' allows you to
7403 upload your own cover images to bib records and display them
7404 on the detail page in the staff client. At this time the cover
7405 will only show under the 'Images' tab on the holdings table on
7406 the detail display, not next to the title at the top left or
7407 on the search results.</para>
7412 <section id="OPACLocalCoverImages">
7413 <title><link linkend="OPACLocalCoverImages">OPACLocalCoverImages</link></title>
7415 <para>Default: Don't display</para>
7417 <para>Asks: ___ local cover images on OPAC search and details
7420 <para>Values:</para>
7424 <para>Display</para>
7428 <para>Don't display</para>
7432 <para>Description:</para>
7436 <para>Setting this preference to 'Display' allows you to
7437 upload your own cover images to bib records and display them
7438 on the detail page and search results in the OPAC.</para>
7444 <section id="novelistselect">
7445 <title><link linkend="novelistselect">Novelist Select</link></title>
7447 <para>Novelist Select is not a free service. Contact your Ebsco
7448 representitive to get your log in information to embed this content
7449 in the OPAC.<important>
7450 <para>Novelist Select does not include cover images for the search results and
7451 bibliographic detail pages. You can choose any other cover image service for this
7452 content or you can contract with Ebsco to get access to the <link linkend="btcontentprefs">Baker & Taylor Content Cafe</link> for an added
7456 <section id="NovelistSelectEnabled">
7457 <title><link linkend="NovelistSelectEnabled">NovelistSelectEnabled</link></title>
7459 <para>Default: Don't add</para>
7461 <para>Asks: ___ Novelist Select content to the OPAC.</para>
7463 <para>Values:</para>
7471 <para>Don't add</para>
7476 <para>Enabling this requires that you have entered in a user
7477 profile and password in the <link linkend="NovelistSelectProfile">NovelistSelectProfile &
7478 NovelistSelectPassword</link> preferences</para>
7479 </important>Description:</para>
7483 <para>Novelist Select from Ebsco is a subscription service
7484 that can provide additional content in the OPAC.</para>
7489 <section id="NovelistSelectProfile">
7490 <title><link linkend="NovelistSelectProfile">NovelistSelectProfile & NovelistSelectPassword</link></title>
7492 <para>Asks: Access Novelist Select using user profile ___ and
7493 password ___.</para>
7496 <para>This information will be visible if someone views the
7497 source code on your OPAC.</para>
7500 <para>Description:</para>
7504 <para>Novelist Select from Ebsco is a subscription service
7505 that can provide additional content in the OPAC.</para>
7510 <section id="NovelistSelectView">
7511 <title><link linkend="NovelistSelectView">NovelistSelectView</link></title>
7513 <para>Default: in an OPAC tab</para>
7515 <para>Asks: Display Novelist Select content ___</para>
7517 <para>Description:</para>
7521 <para>Novelist Select provides a lot of content, for that
7522 reason you have four choices of where to display this content.
7523 The default view is in a tab in the holdings table.</para>
7526 <screeninfo>Novelist Select in a tab</screeninfo>
7530 <imagedata fileref="images/admin/globalprefs/novelisttab.png"/>
7535 <para>The content is the same if you choose to show it above
7536 the holdings table or below it. If shown in the right column
7537 of the page it's the same content, but displays a bit
7538 differently since space is limited.</para>
7541 <screeninfo>Novelist Select on the side</screeninfo>
7545 <imagedata fileref="images/admin/globalprefs/novelistside.png"/>
7552 <para>Values:</para>
7556 <para>above the holdings table</para>
7560 <para>below the holdings table</para>
7564 <para>in an OPAC tab</para>
7568 <para>under the Save Record dropdown on the right</para>
7574 <section id="oclcprefs">
7575 <title><link linkend="oclcprefs">OCLC</link></title>
7579 <section id="XISBN">
7580 <title><link linkend="XISBN">XISBN</link></title>
7582 <para>Default: Don't use</para>
7584 <para>Asks: ___ the OCLC xISBN service to show other editions of a
7587 <para>Description:</para>
7591 <para>Set to 'Use' to display an "Editions" tab on the item's
7592 detail page. Editions are listed, complete with cover art and
7593 bibliographic information. The feed comes from OCLC's xISBN
7594 web service. The feed limit for non-commercial sites is 1000
7595 requests per day.</para>
7599 <para>Values:</para>
7603 <para>Don't use</para>
7612 <para>Requires <link linkend="FRBRizeEditions">FRBRizeEditions</link> and/or <link linkend="OPACFRBRizeEditions">OPACFRBRizeEditions</link> set to
7617 <section id="OCLCAffiliateID">
7618 <title><link linkend="OCLCAffiliateID">OCLCAffiliateID</link></title>
7620 <para>Asks: Use the OCLC affiliate ID ___ to access the xISBN
7623 <para>Description:</para>
7627 <para>This setting is only applicable if the library has an
7628 OCLC Affiliate ID. This allows WorldCat searching in the OPAC
7629 via the XISBN programming interface. Simply enter the
7630 library's OCLC Affiliate ID in the box provided. Please note
7631 that using this data is only necessary if <link linkend="FRBRizeEditions">FRBRizeEditions</link> and/or <link linkend="OPACFRBRizeEditions">OPACFRBRizeEditions</link> and
7632 <link linkend="XISBN">XISBN</link> settings are enabled. For
7633 more information on this service please visit the OCLC
7634 website: <ulink url="http://www.worldcat.org/affiliate/default.jsp">http://www.worldcat.org/affiliate/default.jsp</ulink>.</para>
7639 <para>Unless you have signed up for an ID with OCLC, you are
7640 limited to 1000 requests per day. Available at: <ulink url="http://www.worldcat.org/affiliate/webservices/xisbn/app.jsp">http://www.worldcat.org/affiliate/webservices/xisbn/app.jsp</ulink></para>
7644 <section id="XISBNDailyLimit">
7645 <title><link linkend="XISBNDailyLimit">XISBNDailyLimit</link></title>
7647 <para>Default: 999</para>
7649 <para>Asks: Only use the xISBN service ___ times a day.</para>
7652 <para>Unless you have signed up for an ID with OCLC, you are
7653 limited to 1000 requests per day. Available at: <ulink url="http://www.worldcat.org/affiliate/webservices/xisbn/app.jsp">http://www.worldcat.org/affiliate/webservices/xisbn/app.jsp</ulink></para>
7658 <section id="OpenLibraryPrefs">
7659 <title><link linkend="OpenLibraryPrefs">Open Library</link></title>
7661 <section id="OpenLibraryCovers">
7662 <title><link linkend="OpenLibraryCovers">OpenLibraryCovers</link></title>
7664 <para>Default: Don't add</para>
7666 <para>Asks: ___ cover images from Open Library to search results
7667 and item detail pages on the OPAC.</para>
7669 <para>Values:</para>
7677 <para>Don't add</para>
7681 <para>Description:</para>
7685 <para>This setting controls the display of applicable cover
7686 art from the free Open Library database, via the Open Library
7687 API. Please note that to use this feature, all other cover
7688 services should be turned off.</para>
7692 <section id="OpenLibrarySearch">
7693 <title><link linkend="OpenLibrarySearch">OpenLibrarySearch</link></title>
7694 <para>Default: Don't show</para>
7695 <para>Asks: ___ search results from Open Library on the OPAC. </para>
7696 <para>Values:<itemizedlist>
7698 <para>Don't show</para>
7701 <para>Show<screenshot>
7702 <screeninfo>Open Library results</screeninfo>
7705 <imagedata fileref="images/admin/globalprefs/OpenLibrarySearch.png"/>
7708 </screenshot></para>
7710 </itemizedlist></para>
7713 <section id="overdriveprefs">
7714 <title><link linkend="overdriveprefs">Overdrive</link></title>
7715 <para>OverDrive is an pay service. You must first contact OverDrive directly for pricing
7716 and subscription information. Enabling this service will integrate Overdrive results in
7717 to your OPAC searches. You will have to apply for these 3 pieces of information through
7718 an application as an API developer. Overdrive API applications are evaluated once a week
7719 so you may not be able to use this feature immediately after signing up. To learn more
7720 please contact your OverDrive representative.</para>
7722 <screeninfo>Overdrive results</screeninfo>
7725 <imagedata fileref="images/admin/globalprefs/Overdrive.png"/>
7729 <section id="OverDriveClientKey">
7730 <title><link linkend="OverDriveClientKey">OverDriveClientKey and OverDriveClientSecret</link></title>
7731 <para>Asks: Include OverDrive availability information with the client key __ and client
7733 <para>Description:<itemizedlist>
7735 <para>OverDrive customers can get this information by visiting the <ulink url="https://developer.overdrive.com/docs/getting-started">OverDrive Developer
7736 Portal</ulink> and following the instructions found there to apply as an API
7737 developer. Once this data and the <link linkend="OverDriveLibraryID">OverDriveLibraryID</link> are populated you will see OverDrive results on
7738 your OPAC searches.</para>
7740 </itemizedlist></para>
7742 <section id="OverDriveLibraryID">
7743 <title><link linkend="OverDriveLibraryID">OverDriveLibraryID</link></title>
7744 <para>Asks: Show items from the OverDrive catalog of library # ___</para>
7745 <para>Description:<itemizedlist>
7747 <para>OverDrive customers can get this information by visiting the <ulink url="https://developer.overdrive.com/docs/getting-started">OverDrive Developer
7748 Portal</ulink> and following the instructions found there to apply as an API
7749 developer. Once this data and the <link linkend="OverDriveClientKey">OverDriveClientKey and OverDriveClientSecret</link> are populated you will
7750 see OverDrive results on your OPAC searches.</para>
7752 </itemizedlist></para>
7755 <section id="pluginprefs">
7756 <title><link linkend="pluginprefs">Plugins</link></title>
7757 <section id="UseKohaPlugins">
7758 <title><link linkend="UseKohaPlugins">UseKohaPlugins</link></title>
7759 <para>Default: Don't enable</para>
7760 <para>Asks: ___ the ability to use Koha Plugins.</para>
7761 <para>Values:<itemizedlist>
7763 <para>Don't enable</para>
7768 </itemizedlist></para>
7770 <para>The plugin system must also be enabled in the Koha configuration file to be
7771 fully enabled. Learn more in the <link linkend="pluginsystem">Plugins
7772 chapter</link>.</para>
7777 <section id="Syndeticsprefs">
7778 <title><link linkend="Syndeticsprefs">Syndetics</link></title>
7780 <para>Syndetics is a pay service. You must first contact Syndetics
7781 directly for pricing and subscription information.</para>
7783 <section id="SyndeticsEnabled">
7784 <title><link linkend="SyndeticsEnabled">SyndeticsEnabled</link></title>
7786 <para>Default: Don't use</para>
7788 <para>Asks: ___ content from Syndetics.</para>
7790 <para>Values:</para>
7794 <para>Don't use</para>
7802 <para>Description:</para>
7806 <para>When this option is enabled any of the Syndetics options
7812 <para>Requires that you enter your <link linkend="SyndeticsClientCode">SyndeticsClientCode</link> before
7813 this content will appear.</para>
7817 <section id="SyndeticsClientCode">
7818 <title><link linkend="SyndeticsClientCode">SyndeticsClientCode</link></title>
7820 <para>Asks: Use the client code ___ to access Syndetics.</para>
7822 <para>Description:</para>
7826 <para>Once the library signs up for Syndetics' services,
7827 Syndetics will provide the library with an access code. (Visit
7828 the Syndetics homepage at <ulink url="http://www.bowker.com/syndetics/">http://www.bowker.com/syndetics/</ulink>
7829 for more information.) This is the code that must be entered
7830 to access Syndetics' subscription services. Syndetics is a
7831 paid subscription service. This value must be entered before
7832 <link linkend="SyndeticsEditions">SyndeticsEditions</link> can
7833 be enabled. If the code is lost, corrupted, or forgotten, a
7834 new one can be obtained from <ulink url="http://www.bowker.com/syndetics/">http://www.bowker.com/syndetics/</ulink>.</para>
7839 <para>You will need to get your client code directly from
7844 <section id="SyndeticsCoverImages">
7845 <title><link linkend="SyndeticsCoverImages">SyndeticsCoverImages & SyndeticsCoverImageSize</link></title>
7847 <para>SyndeticsCoverImages Default: Don't show</para>
7849 <para>SyndeticsCoverImageSize Default: medium</para>
7851 <para>Asks: ___ cover images from Syndetics on search results and
7852 item detail pages on the OPAC in a ___ size.</para>
7854 <para>Descriptions:</para>
7858 <para>When enabled, SyndeticsCoverImages, allows libraries to
7859 display Syndetics' collection of full-color cover images for
7860 books, videos, DVDs and CDs on their OPAC. For each book or
7861 item that comes up during a user search, the cover image for
7862 that title will be displayed. Since these cover images come in
7863 three sizes, the optimum size must be selected using the
7864 SyndeticsCoverImageSize preference after SyndeticsCoverImages
7865 are enabled. Syndetics cover images come in two sizes:
7866 mid-size (187 x 187 pixels), and large (400 x 400 pixels).
7867 Syndetics is a paid subscription service. The <link linkend="SyndeticsClientCode">SyndeticsClientCode</link> must
7868 be entered and the <link linkend="SyndeticsEnabled">SyndeticsEnabled</link> option must
7869 be activated before this service can be used. Other cover
7870 image preferences should also be disabled to avoid
7871 interference.</para>
7875 <para>SyndeticsCoverImages Values:</para>
7879 <para>Don't show</para>
7887 <para>SyndeticsCoverImageSize Values:</para>
7900 <section id="SyndeticsAuthorNotes">
7901 <title><link linkend="SyndeticsAuthorNotes">SyndeticsAuthorNotes</link></title>
7903 <para>Default: Don't show</para>
7905 <para>Asks: ___ notes about the author of a title from Syndetics
7906 on item detail pages on the OPAC.</para>
7908 <para>Values:</para>
7912 <para>Don't show</para>
7920 <para>Description:</para>
7924 <para>When this option is set to "Show", Syndetics provides
7925 notes and short author biographies for more that 300,000
7926 authors, in both fiction and nonfiction. With this option
7927 enabled the library can display Syndetics Author Notes on the
7928 OPAC. According to the Syndetics Solutions website (<ulink url="http://www.bowker.com/syndetics/">http://www.bowker.com/syndetics/</ulink>),
7929 Author Notes include lists of contributors for many
7930 multi-author texts and compilations. The <link linkend="SyndeticsClientCode">SyndeticsClientCode</link> must
7931 be entered and the <link linkend="SyndeticsEnabled">SyndeticsEnabled</link> option must
7932 be activated before this service can be used.</para>
7937 <section id="SyndeticsAwards">
7938 <title><link linkend="SyndeticsAwards">SyndeticsAwards</link></title>
7940 <para>Default: Don't show</para>
7942 <para>Asks: ___ information from Syndetics about the awards a
7943 title has won on item detail pages on the OPAC.</para>
7945 <para>Values:</para>
7949 <para>Don't show</para>
7957 <para>Description:</para>
7961 <para>When this option is set to "Show", Syndetics provides
7962 its clients with a list of awards that any title has won. With
7963 this service enabled the library can display those awards for
7964 each book on its website. For each book or item that comes up
7965 during a user search, the list of awards for that title will
7966 be displayed. When a user clicks on a given award, information
7967 about that award is presented along with a list of the other
7968 titles that have won that award. If the user clicks on any
7969 title in the list, they will see holdings information about
7970 that title in their region. This option is a paid subscription
7971 service. The <link linkend="SyndeticsClientCode">SyndeticsClientCode</link> must
7972 be entered and the <link linkend="SyndeticsEnabled">SyndeticsEnabled</link> option must
7973 be activated before this service can be used.</para>
7978 <section id="SyndeticsEditions">
7979 <title><link linkend="SyndeticsEditions">SyndeticsEditions</link></title>
7981 <para>Default: Don't show</para>
7983 <para>Asks: ___ information about other editions of a title from
7984 Syndetics on item detail pages on the OPAC</para>
7986 <para>Description:</para>
7990 <para>When enabled this option shows information on other
7991 editions of a title from Syndetics on the item detail pages of
7992 the OPAC. Syndetics is a paid subscription service. The <link linkend="SyndeticsClientCode">SyndeticsClientCode</link> must
7993 be entered and the <link linkend="SyndeticsEnabled">SyndeticsEnabled</link> option must
7994 be activated before this service can be used.</para>
7998 <para>Values:</para>
8002 <para>Don't show</para>
8011 <para>Requires <link linkend="OPACFRBRizeEditions">OPACFRBRizeEditions</link> set to
8016 <section id="SyndeticsExcerpt">
8017 <title><link linkend="SyndeticsExcerpt">SyndeticsExcerpt</link></title>
8019 <para>Default: Don't show</para>
8021 <para>Asks: ___ excerpts from of a title from Syndetics on item
8022 detail pages on the OPAC.</para>
8024 <para>Values:</para>
8028 <para>Don't show</para>
8036 <para>Description:</para>
8040 <para>This preference allows Syndetics to display excerpts
8041 given to them from selected publishers. The excerpts are
8042 available from prominently reviewed new titles, both fiction
8043 and non-fiction. The excerpts include poems, essays, recipes,
8044 forwards and prefaces. Automatic links provided by the ISBNs
8045 within local MARC records are required to integrate Syndetics
8046 secured, high-speed Internet servers to the library OPACs. For
8047 more information see (<ulink url="http://www.bowker.com/syndetics/">http://www.bowker.com/syndetics/</ulink>).</para>
8052 <section id="SyndeticsReviews">
8053 <title><link linkend="SyndeticsReviews">SyndeticsReviews</link></title>
8055 <para>Default: Don't show</para>
8057 <para>Asks: ___ reviews of a title from Syndetics on item detail
8058 pages on the OPAC.</para>
8060 <para>Values:</para>
8064 <para>Don't show</para>
8072 <para>Description:</para>
8076 <para>Syndetics Reviews is an accumulation of book reviews
8077 available from a variety of journals and serials. The reviews
8078 page displays colored images of reviewed books dust jackets,
8079 partnered with the names of the journal or serial providing
8080 the review. Clicking on an icon opens a window revealing the
8081 book title, author's name, book cover icon and the critic's
8082 opinion of the book. Automatic links provided by the ISBNs
8083 within local MARC records are required to integrate Syndetics
8084 secured, high-speed Internet servers to the library OPACs. For
8085 more information see (<ulink url="http://www.bowker.com/syndetics/">http://www.bowker.com/syndetics/</ulink>).</para>
8090 <section id="SyndeticsSeries">
8091 <title><link linkend="SyndeticsSeries">SyndeticsSeries</link></title>
8093 <para>Default: Don't show</para>
8095 <para>Asks: ___ information on other books in a title's series
8096 from Syndetics on item detail pages on the OPAC.</para>
8098 <para>Values:</para>
8102 <para>Don't show</para>
8110 <para>Description:</para>
8114 <para>Each fiction title within a series is linked to the
8115 complete series record. The record displays each title in
8116 reading order and also displays the publication order, if
8117 different. Alternate series titles are also displayed.
8118 Automatic links provided by the ISBNs within local MARC
8119 records are required to integrate Syndetics secured, high-
8120 speed Internet servers to the library OPACs. For more
8121 information see (<ulink url="http://www.bowker.com/syndetics/">http://www.bowker.com/syndetics/</ulink>).</para>
8126 <section id="SyndeticsSummary">
8127 <title><link linkend="SyndeticsSummary">SyndeticsSummary</link></title>
8129 <para>Default: Don't show</para>
8131 <para>Asks: ___ a summary of a title from Syndetics on item detail
8132 pages on the OPAC.</para>
8134 <para>Values:</para>
8138 <para>Don't show</para>
8146 <para>Description:</para>
8150 <para>Providing more than 5.6 million summaries and
8151 annotations derived from book jackets, edited publisher copy,
8152 or independently written annotations from Book News, Inc.
8153 Covering fiction and non-fiction, this summaries option
8154 provides annotations on both trade and scholarly titles. For
8155 more information see (<ulink url="http://www.bowker.com/syndetics/">http://www.bowker.com/syndetics/</ulink>).</para>
8160 <section id="SyndeticsTOC">
8161 <title><link linkend="SyndeticsTOC">SyndeticsTOC</link></title>
8163 <para>Default: Don't show</para>
8165 <para>Asks: ___ the table of contents of a title from Syndetics on
8166 item detail pages on the OPAC.</para>
8168 <para>Values:</para>
8172 <para>Don't show</para>
8180 <para>Description:</para>
8184 <para>This preference allows staff and patrons to review the
8185 Table of Contents from a wide variety of publications from
8186 popular self-help books to conference proceedings. Specific
8187 Information access is the main purpose for this option,
8188 allowing patrons guidance to their preferred section of the
8189 book. Special arrangements with selected book services is used
8190 to obtain the table of contents for new publications each
8191 year. Automatic links provided by the ISBNs within local MARC
8192 records are required to integrate Syndetics secured,
8193 high-speed Internet servers to the library OPACs. For more
8194 information see (<ulink url="http://www.bowker.com/syndetics/">http://www.bowker.com/syndetics/</ulink>).</para>
8200 <section id="taggingprefs">
8201 <title><link linkend="taggingprefs">Tagging</link></title>
8203 <section id="TagsEnabled">
8204 <title><link linkend="TagsEnabled">TagsEnabled</link></title>
8206 <para>Default: Allow</para>
8208 <para>Asks: ___ patrons and staff to put tags on items.</para>
8210 <para>Values:</para>
8218 <para>Don't allow</para>
8222 <para>Description:</para>
8226 <para>Set to 'Allow' enable tagging. A tag is metadata, a word
8227 added to identify an item. Tags allow patrons to classify
8228 materials on their own. TagsEnabled is the main switch that
8229 permits the tagging features. TagsEnable must be set to
8230 'Allow' to allow for other tagging features.</para>
8235 <section id="TagsModeration">
8236 <title><link linkend="TagsModeration">TagsModeration</link></title>
8238 <para>Default: Don't require</para>
8240 <para>Asks: ___ that tags submitted by patrons be reviewed by a
8241 staff member before being shown.</para>
8243 <para>Values:</para>
8247 <para>Don't require</para>
8251 <para>Require</para>
8255 <para>Description:</para>
8259 <para>When set to 'Require,' all tags to be first filtered by
8260 the tag moderator. Only approved tags will be visible to
8261 patrons. When set to 'Don't require' tags will bypass the tag
8262 moderator and patrons' tags to be immediately visible. When
8263 this preference is enabled the moderator, a staff member,
8264 would approve the tag in the Staff Client. The moderator will
8265 have the option to approve or reject each pending tag
8270 <para>When moderation is required all tags go through the tag
8271 moderation tool before becoming visible.</para>
8275 <para><emphasis>Get there:</emphasis> More > Tools >
8276 <link linkend="tagsmoderation">Tags</link></para>
8281 <section id="TagsShowOnList">
8282 <title><link linkend="TagsShowOnList">TagsShowOnList</link></title>
8284 <para>Default: 6</para>
8286 <para>Asks: Show ___ tags on search results on the OPAC.</para>
8289 <para>Set the value to 0 (zero) to turn this feature off.</para>
8293 <section id="TagsInputOnList">
8294 <title><link linkend="TagsInputOnList">TagsInputOnList</link></title>
8296 <para>Default: Allow</para>
8298 <para>Asks: ___ patrons to input tags on search results on the
8301 <para>Values:</para>
8308 <screeninfo>Tags on Search Results</screeninfo>
8312 <imagedata fileref="images/admin/globalprefs/TagsInputOnList.png"/>
8319 <para>Don't allow</para>
8324 <section id="TagsShowOnDetail">
8325 <title><link linkend="TagsShowOnDetail">TagsShowOnDetail</link></title>
8327 <para>Default: 10</para>
8329 <para>Asks: Show ___ tags on item detail pages on the OPAC.</para>
8332 <para>Set the value to 0 (zero) to turn this feature off.</para>
8336 <section id="TagsInputOnDetail">
8337 <title><link linkend="TagsInputOnDetail">TagsInputOnDetail</link></title>
8339 <para>Default: Allow</para>
8341 <para>Asks: ___ patrons to input tags on item detail pages on the
8344 <para>Values:</para>
8351 <screeninfo>Add Tags on Detail</screeninfo>
8355 <imagedata fileref="images/admin/globalprefs/TagsInputOnDetail.png"/>
8362 <para>Don't allow</para>
8367 <section id="TagsExternalDictionary">
8368 <title><link linkend="TagsExternalDictionary">TagsExternalDictionary</link></title>
8370 <para>Asks: Allow tags in the dictionary of the ispell executable
8371 ___ on the server to be approved without moderation.</para>
8373 <para>Description:</para>
8377 <para>The dictionary includes a list of accepted and rejected
8378 tags. The accepted list includes all the tags that have been
8379 pre-allowed. The rejected list includes tags that are not
8380 allowed. This preference identifies the "accepted" dictionary
8381 used. Ispell is an open source dictionary which can be used as
8382 a list of accepted terms. Since the dictionary allows for
8383 accurately spelled obscenities, the libraries policy may
8384 dictate that modifications are made to the Ispell dictionary
8385 if this preference is use. For more information about Ispell
8386 <ulink url="http://www.gnu.org/software/ispell/ispell.html">http://www.gnu.org/software/ispell/ispell.html</ulink>.
8387 Enter the path on your server to a local ispell executable,
8388 used to set $Lingua::Ispell::path.</para>
8395 <section id="l18nprefs">
8396 <title><link linkend="l18nprefs">I18N/L10N</link></title>
8398 <para>These preferences control your Internationalization and Localization
8401 <para><emphasis>Get there:</emphasis> More > Administration >
8402 Global System Preferences > I18N/L10N</para>
8403 <section id="AddressFormat">
8404 <title><link linkend="AddressFormat">AddressFormat</link></title>
8405 <para>Default: US style ([Street number], [Address] - [City], [Zip/Postal Code],
8407 <para>Asks: Format postal addresses using ___</para>
8408 <para>Values:<itemizedlist>
8410 <para>German style ([Address] [Street number] - [Zip/Postal Code] [City] -
8414 <para>US style ([Street number], [Address] - [City], [Zip/Postal Code],
8417 </itemizedlist>Description:<itemizedlist>
8419 <para>This preference will let you control how Koha displays patron addresses given
8420 the information entered in the various fields on their record.</para>
8422 </itemizedlist></para>
8424 <section id="alphabet">
8425 <title><link linkend="alphabet">alphabet</link></title>
8426 <para>Default: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z</para>
8427 <para>Asks: Use the alphabet ___ for lists of browsable letters. This should be a space
8428 separated list of uppercase letters. </para>
8429 <para>Description:</para>
8432 <para>This preference allows you define your own alphabet for browsing patrons in Koha.</para>
8434 <screeninfo>Alphabet browse on patron module</screeninfo>
8437 <imagedata fileref="images/admin/globalprefs/alphabet.png"/>
8445 <section id="CalendarFirstDayOfWeek">
8446 <title><link linkend="CalendarFirstDayOfWeek">CalendarFirstDayOfWeek</link></title>
8448 <para>Default: Sunday</para>
8450 <para>Asks: Use ___ as the first day of week in the calendar.</para>
8452 <para>Values:</para>
8463 <para>Tuesday</para>
8466 <para>Wednesday</para>
8469 <para>Thursday</para>
8475 <para>Saturday</para>
8479 <para>Description:</para>
8483 <para>Using this preference you can control what day shows as
8484 the first day of the week in the calendar pop ups throughout
8485 Koha and on the Calendar tool. If you change this preference and
8486 don't see a change in your browser try clearing your cache since
8487 it makes changes to the Javascript on these pages.</para>
8492 <section id="dateformat">
8493 <title><link linkend="dateformat">dateformat</link></title>
8495 <para>Default: mm/dd/yyyy</para>
8497 <para>Asks: Format dates like ___</para>
8499 <para>Values:</para>
8503 <para>dd.mm.yyyy</para>
8506 <para>dd/mm/yyyy</para>
8510 <para>mm/dd/yyyy</para>
8514 <para>yyyy/mm/dd</para>
8518 <para>Description:</para>
8522 <para>This preference controls how the date is displayed. The
8523 options are the United States method, mm/dd/yyyy (04/24/2010),
8524 the metric method, dd/mm/yyyy (24/04/2010) or ISO, which is the
8525 International Standard of Organization, yyyy/mm/dd (2010/04/24).
8526 The International Standard of Organization would primarily be
8527 used by libraries with locations in multiple nations that may
8528 use different date formats, to have a single display type, or if
8529 the library would be in a region that does not use the United
8530 States or metric method. More information regarding the ISO date
8531 format can be found at <ulink url="http://www.iso.org/iso/iso_catalogue.htm">http://www.iso.org/iso/iso_catalogue.htm</ulink>.</para>
8536 <section id="languagepref">
8537 <title><link linkend="languagepref">language</link></title>
8539 <para>Default: English</para>
8541 <para>Asks: Enable the following languages on the staff
8544 <para>Values:</para>
8548 <para>English</para>
8552 <para>To install additional languages please refer to <ulink url="http://wiki.koha-community.org/wiki/Installation_of_additional_languages_for_OPAC_and_INTRANET_staff_client">http://wiki.koha-community.org/wiki/Installation_of_additional_languages_for_OPAC_and_INTRANET_staff_client</ulink>
8556 <section id="opaclanguages">
8557 <title><link linkend="opaclanguages">opaclanguages</link></title>
8559 <para>Default: English</para>
8561 <para>Asks: Enable the following languages on the OPAC</para>
8563 <para>Values:</para>
8567 <para>English</para>
8571 <para>To install additional languages you need to run misc/translation/install-code.pl.
8572 For example, to install French you would run the following command install-code.pl
8573 fr-FR to make the templates, once they exist and are in the right place then they will
8574 show up as an option in this preference.</para>
8578 <section id="opaclanguagesdisplay">
8579 <title><link linkend="opaclanguagesdisplay">opaclanguagesdisplay</link></title>
8581 <para>Default: Don't allow</para>
8583 <para>Asks: ___ patrons to select their language on the OPAC.</para>
8585 <para>Values:</para>
8589 <para>Allow<itemizedlist>
8591 <para>Patrons can choose their language from a list at the bottom of the public
8595 <screeninfo>Language selector in OPAC</screeninfo>
8599 <imagedata fileref="images/admin/globalprefs/opaclanguagesdisplay.png"/>
8604 </itemizedlist></para>
8610 <para>Don't allow<itemizedlist>
8612 <para>The public catalog will not give an option to choose a language</para>
8614 </itemizedlist></para>
8617 <para>Description:<itemizedlist>
8619 <para>Using the <link linkend="OpacLangSelectorMode">OpacLangSelectorMode</link>
8620 preference you can decide where these language options will appear in the public
8623 </itemizedlist></para>
8625 <section id="TimeFormat">
8626 <title><link linkend="TimeFormat">TimeFormat</link></title>
8627 <para>Default: 24 hour format</para>
8628 <para>Asks: Format times in ___ </para>
8629 <para>Values:<itemizedlist>
8631 <para>12 hour format (eg 02:18PM)</para>
8634 <para>24 hour format (eg 14:18)</para>
8636 </itemizedlist></para>
8639 <section id="labsprefs">
8640 <title><link linkend="labsprefs">Labs</link></title>
8641 <para><emphasis>Get there:</emphasis> More > Administration > Global System
8642 Preferences > Labs</para>
8643 <para>The preferences in this section are for experimental features that need additional
8644 testing and debugging.</para>
8645 <section id="EnableAdvancedCatalogingEditor">
8646 <title><link linkend="EnableAdvancedCatalogingEditor">EnableAdvancedCatalogingEditor</link></title>
8647 <para>Default: Don't enable</para>
8648 <para>Asks: ___ the advanced cataloging editor.</para>
8649 <para>Description:<itemizedlist>
8651 <para>This preference will allow you to choose between a basic editor and a advanced
8652 editor for cataloging.</para>
8654 </itemizedlist></para>
8657 <para>This feature is currently experimental, and may have bugs that cause corruption
8658 of records. It also does not include any support for UNIMARC or NORMARC fixed
8659 fields. Please help us test it and report any bugs, but do so at your own risk.
8666 <section id="localprefs">
8667 <title><link linkend="localprefs">Local Use</link></title>
8669 <para>These preferences are defined
8672 <para><emphasis>Get there:</emphasis> More > Administration >
8673 Global System Preferences > Local Use<note>
8674 <para>Sometimes preferences which are either new or outdated will
8675 appear in this tab, if you didn't add any preferences to this tab
8676 then it's best to ignore preferences listed here.</para>
8681 <title><link linkend="logs">Logs</link></title>
8683 <para>Logs keep track of transaction on the system. You can decide which actions you want to
8684 log and which you don't using these preferences. Logs can then be viewed in the <link linkend="logviewer">Log Viewer</link> under Tools.</para>
8686 <para><emphasis>Get there:</emphasis> More > Administration >
8687 Global System Preferences > Logs</para>
8688 <section id="debuggingprefs">
8689 <title><link linkend="debuggingprefs">Debugging</link></title>
8690 <section id="DumpTemplateVarsIntranet">
8691 <title><link linkend="DumpTemplateVarsIntranet">DumpTemplateVarsIntranet</link></title>
8692 <para>Default: Don't</para>
8693 <para>Asks: ___ dump all Template Toolkit variable to a comment in the html source for
8694 the staff intranet. </para>
8695 <para>Value: <itemizedlist>
8702 </itemizedlist></para>
8704 <section id="DumpTemplateVarsOpac">
8705 <title><link linkend="DumpTemplateVarsOpac">DumpTemplateVarsOpac</link></title>
8706 <para>Default: Don't</para>
8707 <para>Asks: ___ dump all Template Toolkit variable to a comment in the html source for
8709 <para>Value: <itemizedlist>
8716 </itemizedlist></para>
8719 <section id="loggingprefs">
8720 <title><link linkend="loggingprefs">Logging</link></title>
8721 <section id="AuthoritiesLog">
8722 <title><link linkend="AuthoritiesLog">AuthoritiesLog</link></title>
8723 <para>Default: Don't log</para>
8724 <para>Asks: ___ changes to authority records.</para>
8725 <para>Values:</para>
8728 <para>Don't log</para>
8735 <section id="BorrowersLog">
8736 <title><link linkend="BorrowersLog">BorrowersLog</link></title>
8737 <para>Default: Log</para>
8738 <para>Asks: ___ changes to patron records.</para>
8739 <para>Values:</para>
8742 <para>Don't log</para>
8749 <section id="CataloguingLog">
8750 <title><link linkend="CataloguingLog">CataloguingLog</link></title>
8751 <para>Default: Don't log</para>
8752 <para>Asks: ___ any changes to bibliographic or item records.</para>
8753 <para>Values:</para>
8756 <para>Don't log</para>
8763 <para>Since this occurs whenever a book is cataloged, edited, or checked in or out it
8764 can be very resource intensive - slowing down your system.</para>
8767 <section id="CronjobLog">
8768 <title><link linkend="CronjobLog">CronjobLog</link></title>
8769 <para>Default: Don't log</para>
8770 <para>Asks: ___ information from cron jobs. </para>
8771 <para>Values:</para>
8774 <para>Don't log</para>
8781 <section id="FinesLog">
8782 <title><link linkend="FinesLog">FinesLog</link></title>
8783 <para>Default: Log</para>
8784 <para>Asks: ___ when overdue fines are charged or automatically forgiven.</para>
8785 <para>Values:</para>
8788 <para>Don't log</para>
8795 <section id="IssueLog">
8796 <title><link linkend="IssueLog">IssueLog</link></title>
8797 <para>Default: Log</para>
8798 <para>Asks: ___ when items are checked out.</para>
8799 <para>Values:</para>
8802 <para>Don't log</para>
8809 <section id="LetterLog">
8810 <title><link linkend="LetterLog">LetterLog</link></title>
8811 <para>Default: Log</para>
8812 <para>Asks: ___ when an automatic claim notice is sent.</para>
8813 <para>Values:</para>
8816 <para>Don't log</para>
8823 <para>This log tracks all notices that go to patrons including the overdue
8827 <section id="ReportsLog">
8828 <title><link linkend="ReportsLog">ReportsLog</link></title>
8829 <para>Default: Don't log</para>
8830 <para>Asks: ___ when reports are added, deleted or changed.</para>
8831 <para>Values:</para>
8834 <para>Don't log</para>
8841 <section id="ReturnLog">
8842 <title><link linkend="ReturnLog">ReturnLog</link></title>
8843 <para>Default: Log</para>
8844 <para>Asks: ___ when items are returned.</para>
8845 <para>Values:</para>
8848 <para>Don't log</para>
8855 <section id="SubscriptionLog">
8856 <title><link linkend="SubscriptionLog">SubscriptionLog</link></title>
8857 <para>Default: Log</para>
8858 <para>Asks: ___ when serials are added, deleted or changed.</para>
8859 <para>Values:</para>
8862 <para>Don't log</para>
8872 <section id="opacprefs">
8873 <title><link linkend="opacprefs">OPAC</link></title>
8875 <para><emphasis>Get there:</emphasis> More > Administration >
8876 Global System Preferences > OPAC</para>
8877 <section id="advancedsearchopt">
8878 <title><link linkend="advancedsearchopt">Advanced Search Options</link></title>
8880 <section id="OpacAdvSearchMoreOptions">
8881 <title><link linkend="OpacAdvSearchMoreOptions">OpacAdvSearchMoreOptions</link></title>
8882 <para>Default: Select All</para>
8883 <para>Asks: Show search options for the expanded view ___</para>
8884 <para>Values:<itemizedlist>
8886 <para>[Select all]</para>
8889 <para>Item types</para>
8892 <para>Language</para>
8895 <para>Location and availability</para>
8898 <para>Publication date</para>
8901 <para>Sorting</para>
8904 <para>Subtypes</para>
8906 </itemizedlist></para>
8907 <para>Description:<itemizedlist>
8909 <para>The settings in this preference will determine which search fields will show
8910 when the patron is using the 'More options' mode on the advanced search
8913 </itemizedlist></para>
8915 <section id="OpacAdvSearchOptions">
8916 <title><link linkend="OpacAdvSearchOptions">OpacAdvSearchOptions</link></title>
8917 <para>Default: Item types, Language, Location and availability, Publication date,
8919 <para>Asks: Show search options ___ </para>
8920 <para>Values:<itemizedlist>
8922 <para>[Select all]</para>
8925 <para>Item types</para>
8928 <para>Language</para>
8931 <para>Location and availability</para>
8934 <para>Publication date</para>
8937 <para>Sorting</para>
8940 <para>Subtypes</para>
8942 </itemizedlist></para>
8943 <para>Description:<itemizedlist>
8945 <para>The settings in this preference will determine which search fields will show
8946 when the patron is using the 'Fewer options' mode on the advanced search
8949 </itemizedlist></para>
8953 <section id="opacappearanceprefs">
8954 <title><link linkend="opacappearanceprefs">Appearance</link></title>
8956 <para>These preferences control how things appear in the
8959 <section id="AuthorisedValueImages">
8960 <title><link linkend="AuthorisedValueImages">AuthorisedValueImages</link></title>
8962 <para>Default: Don't show</para>
8964 <para>Asks: ___ images for authorized values (such as lost
8965 statuses and locations) in search results and item detail pages on
8968 <para>Values:</para>
8972 <para>Don't show</para>
8980 <para><emphasis>Get there:</emphasis> More > Administration
8981 > <link linkend="authorizedvalues">Authorized
8982 Values</link></para>
8985 <section id="BiblioDefaultView">
8986 <title><link linkend="BiblioDefaultView">BiblioDefaultView</link></title>
8988 <para>Default: in simple form</para>
8990 <para>Asks: By default, show bib records ___</para>
8992 <para>Values:</para>
8996 <para>as specified in the ISBD template.</para>
9000 <para>See <link linkend="isbdpref">ISBD</link> preference
9001 for more information</para>
9007 <para>in simple form.</para>
9011 <para>in their MARC format.</para>
9015 <para>Description:</para>
9019 <para>This preference determines the level of bibliographic
9020 detail that the patron will see on the OPAC detail page. The
9021 simple form displays the graphical interface; MARC format
9022 displays the MARC21 cataloging view; ISBD displays the ISBD
9023 (International Standard Bibliographic Description, AACR2)
9029 <section id="COinSinOPACResults">
9030 <title><link linkend="COinSinOPACResults">COinSinOPACResults</link></title>
9032 <para>Default: Include</para>
9034 <para>Asks: ___ COinS / OpenURL / Z39.88 in OPAC search
9037 <para>Values:</para>
9041 <para>Don't include</para>
9045 <para>If you choose not to include COinS on the search
9046 results, it will still be loaded on the individual
9047 bibliographic records.</para>
9053 <para>Include</para>
9057 <para>Enabling this feature will slow OPAC search response
9064 <para>Description:</para>
9068 <para>COinS stands for ContextObjects in Spans. COinS is a
9069 method to embed bibliographic metadata in the HTML code of web
9070 pages. This allows bibliographic software to publish
9071 machine-readable bibliographic items and client reference
9072 management software (such as Zotero) to retrieve bibliographic
9073 metadata. The metadata can also be sent to an OpenURL
9074 resolver. This allows, for instance, searching for a copy of a
9075 book in one's own library.</para>
9080 <section id="DisplayOPACiconsXSLT">
9081 <title><link linkend="DisplayOPACiconsXSLT">DisplayOPACiconsXSLT</link></title>
9083 <para>Default: Don't show</para>
9085 <para>Asks: On pages displayed with XSLT stylesheets on the OPAC,
9086 ___ icons for itemtype and authorized values.<important>
9087 <para><link linkend="OPACXSLTResultsDisplay">OPACXSLTResultsDisplay</link>
9088 and/or <link linkend="OPACXSLTDetailsDisplay">OPACXSLTDetailsDisplay</link>
9089 must be set to use an XSLT stylesheet for this to show
9090 (default or custom)</para>
9093 <para>Values:</para>
9097 <para>Don't show</para>
9104 <screeninfo>DisplayOPACiconsXSLT</screeninfo>
9108 <imagedata fileref="images/admin/globalprefs/DisplayOPACiconsXSLT.png"/>
9116 <para>See the <link linkend="XSLTiTypes">XSLT Icon
9117 Guide</link> for more information on these icons.</para>
9121 <section id="hidelostitems">
9122 <title><link linkend="hidelostitems">hidelostitems</link></title>
9124 <para>Default: Don't show</para>
9126 <para>Asks: ___ lost items on search and detail pages.</para>
9128 <para>Description:</para>
9132 <para>Items that are marked lost by the library can either be
9133 shown or not shown on the OPAC. By setting the value to "Don't
9134 show," the lost item is not shown on the OPAC. By setting the
9135 value "Show," the lost item is shown on the OPAC for patrons
9136 to view with a status of 'lost.'</para>
9140 <para>Values:</para>
9144 <para>Don't show</para>
9151 <screeninfo>Lost item showing in the OPAC</screeninfo>
9155 <imagedata fileref="images/admin/globalprefs/hidelostitems.png"/>
9162 <section id="HighlightOwnItemsOnOPAC">
9163 <title><link linkend="HighlightOwnItemsOnOPAC">HighlightOwnItemsOnOPAC & HighlightOwnItemsOnOPACWhich</link></title>
9164 <para>HighlightOwnItemsOnOPAC Default: Don't emphasize</para>
9165 <para>HighlightOwnItemsOnOPACWhich Default: patron's home library </para>
9166 <para>Asks: ___ results from the ___ by moving the results to the front and increasing
9167 the size or highlighting the rows for those results. </para>
9168 <para>HighlightOwnItemsOnOPAC Values:<itemizedlist>
9170 <para>Don't emphasize</para>
9173 <para>Emphasize</para>
9175 </itemizedlist></para>
9176 <para>HighlightOwnItemsOnOPACWhich Values:<itemizedlist>
9178 <para>OPAC's branch based via the URL<itemizedlist>
9180 <para>The library is chosen based on the Apache environment variable
9181 BRANCHCODE. For example, this could be added to the OPAC section of
9182 koha-httpd.conf: SetEnv BRANCHCODE "CPL"</para>
9184 </itemizedlist></para>
9187 <para>patron's home library<itemizedlist>
9189 <para>The items emphasized will be those of the same library as the patron's
9190 library. If no one is logged into the OPAC, no items will be
9193 </itemizedlist></para>
9195 </itemizedlist></para>
9197 <para>This preference will only effect sites that are not using an XSLT stylesheet.
9198 XSLT stylesheets are defined in the <link linkend="OPACXSLTResultsDisplay">OPACXSLTResultsDisplay</link> and <link linkend="OPACXSLTDetailsDisplay">OPACXSLTDetailsDisplay</link> preferences.</para>
9201 <section id="GoogleIndicTransliteration">
9202 <title><link linkend="GoogleIndicTransliteration">GoogleIndicTransliteration</link></title>
9203 <para>Default: Don't show</para>
9204 <para>Asks: ___ GoogleIndicTransliteration on the OPAC. </para>
9205 <para>Values:<itemizedlist>
9207 <para>Don't show</para>
9210 <para>Show<screenshot>
9214 <imagedata fileref="images/admin/globalprefs/GoogleIndicTransliteration.png"/>
9217 </screenshot></para>
9219 </itemizedlist></para>
9222 <section id="LibraryName">
9223 <title><link linkend="LibraryName">LibraryName</link></title>
9225 <para>Asks: Show ___ as the name of the library on the
9229 <para>This value will appear in the title bar of the
9234 <para>Edit '<link linkend="opacheader">opacheader</link>' if
9235 you'd like to add a library name above your search box on the
9240 <screeninfo>Browser title and address bar</screeninfo>
9244 <imagedata fileref="images/admin/globalprefs/LibraryName.png"/>
9249 <section id="NoLoginInstructions">
9250 <title><link linkend="NoLoginInstructions">NoLoginInstructions</link></title>
9251 <para>Asks: Show the following HTML on the OPAC login form when a patron is not logged
9253 <para>Description:<itemizedlist>
9255 <para>This preference allows you to override the default text seen on the log in
9256 page in the Koha OPAC. The default HTML
9257 is:<programlisting><h5>Don't have a password yet?</h5>
9258 <p> If you don't have a password yet, stop by the circulation desk the next time you're in the library. We'll happily set one up for you.</p>
9259 <h5>Don't have a library card?</h5>
9260 <p> If you don't have a library card, stop by your local library to sign up.</p></programlisting></para>
9261 <para>Any HTML in this box will replace the above text below the log in box.<screenshot>
9262 <screeninfo>No login instructions</screeninfo>
9265 <imagedata fileref="images/admin/globalprefs/NoLoginInstructions.png"/>
9268 </screenshot></para>
9270 </itemizedlist></para>
9273 <section id="OpacAddMastheadLibraryPulldown">
9274 <title><link linkend="OpacAddMastheadLibraryPulldown">OpacAddMastheadLibraryPulldown</link></title>
9276 <para>Default: Don't add</para>
9278 <para>Asks: ___ a library select pulldown menu on the OPAC
9281 <para>Values:</para>
9288 <screeninfo>Library select box on Koha OPAC</screeninfo>
9292 <imagedata fileref="images/admin/globalprefs/OpacAddMastheadLibraryPulldown-add.png"/>
9299 <para>Don't Add</para>
9302 <screeninfo>No library select box on Koha OPAC</screeninfo>
9306 <imagedata fileref="images/admin/globalprefs/OpacAddMastheadLibraryPulldown-dontadd.png"/>
9314 <section id="OPACBaseURL">
9315 <title><link linkend="OPACBaseURL">OPACBaseURL</link></title>
9317 <para>Asks: The OPAC is located at ___</para>
9318 <para>Description:<itemizedlist>
9320 <para>This preference is looking for the URL of your public catalog (OPAC) with
9321 the http:// in front of it (enter http://www.mycatalog.com instead of
9322 www.mycatalog.com). Once it is filled in Koha will use it to generate permanent
9323 links in your RSS feeds, for your social network share buttons and in your staff
9324 client when generating links to bib records in the OPAC.</para>
9326 </itemizedlist></para>
9328 <para>Do not include a trailing slash in the URL this will break links created using
9329 this URL. (example: http://www.google.com not http://www.google.com/)</para>
9333 <para>This must be filled in with the URL of your public catalog for RSS, unAPI, and
9334 search plugins to work.</para>
9338 <para>This must be filled in with the URL of your public catalog to show 'OPAC View'
9339 links from bib records in the staff client:</para>
9343 <screeninfo>With OPACBaseURL set, links to the OPAC will appear
9344 on each individual bib record in the staff client</screeninfo>
9348 <imagedata fileref="images/admin/globalprefs/OPACBaseURL.png"/>
9354 <section id="OpacAdditionalStylesheet">
9355 <title><link linkend="OpacAdditionalStylesheet">OpacAdditionalStylesheet</link></title>
9356 <para>Asks: Include the additional CSS stylesheet ___ to override specified settings
9357 from the default stylesheet.</para>
9358 <para>Description:</para>
9361 <para>The preference can look for stylesheets in the template directory for your
9362 OPAC language, for instance: /koha-tmpl/opac-tmpl/prog/en/css. If you upload a
9363 custom file, opac-mystyles.css to this directory, you can specify it by entering
9364 opac-mystyles.css in your opaccolorstylesheet system preference. This adds your
9365 custom stylesheet as a linked stylesheet alongside the OPAC's default CSS files.
9366 This method is preferable because linked stylesheets are cached by the user's
9367 browser, meaning upon repeat visits to your site the user's browser will not have
9368 to re-download the stylesheet, instead using the copy in the browser's
9372 <para>If you would rather, you can upload your CSS to another server and enter the
9373 full URL pointing to it's location remember to begin the URL with http://</para>
9377 <para>Leave this field blank to disable it</para>
9381 <para>This file will add a linked CSS, not replace the existing default CSS.</para>
9386 <section id="opaccredits">
9387 <title><link linkend="opaccredits">opaccredits</link></title>
9389 <para>Asks: Include the following HTML in the footer of all pages
9393 <para>Click the 'Click to edit; link to enter HTML to appear at
9394 the bottom of every page in the OPAC</para>
9398 <screeninfo>HTML version of a footer for your OPAC</screeninfo>
9402 <imagedata fileref="images/admin/globalprefs/opaccredits-html.png"/>
9408 <screeninfo>A sample of what can appear in your OPAC
9409 credits/footer</screeninfo>
9413 <imagedata fileref="images/admin/globalprefs/opaccredits.png"/>
9418 <para>Description:</para>
9422 <para>This setting is for credits that will appear at the
9423 bottom of your OPAC pages. Credits traditionally encompass
9424 copyright information, last date updated, hyperlinks or other
9425 information represented in an HTML format. This is static
9426 information and any updates must be entered manually.</para>
9430 <para>Learn more in the <link linkend="editableopac">OPAC Editable
9431 Regions</link> section.</para>
9433 <section id="OpacCustomSearch">
9434 <title><link linkend="OpacCustomSearch">OpacCustomSearch</link></title>
9435 <para>Asks: Replace the search box at the top of OPAC pages with the following
9437 <para>Description:<itemizedlist>
9439 <para>This preference allows you to replace the default search box at the top of
9440 the OPAC : <screenshot>
9441 <screeninfo>Default search box</screeninfo>
9444 <imagedata fileref="images/admin/globalprefs/OpacCustomSearch-default.png"/>
9447 </screenshot></para>
9448 <para>with any HTML you would like :<screenshot>
9449 <screeninfo>Edited search box area</screeninfo>
9452 <imagedata fileref="images/admin/globalprefs/OpacCustomSearch.png"/>
9455 </screenshot></para>
9457 </itemizedlist></para>
9460 <section id="OPACDisplay856uAsImage">
9461 <title><link linkend="OPACDisplay856uAsImage">OPACDisplay856uAsImage</link></title>
9463 <para>Default: Neither details or results page</para>
9465 <para>Asks: Display the URI in the 856u field as an image on:
9468 <para>Values:</para>
9472 <para>Both results and details pages</para>
9477 <para>Not implemented yet</para>
9484 <para>Detail page only</para>
9489 <para><link linkend="OPACXSLTDetailsDisplay">OPACXSLTDetailsDisplay</link>
9490 needs to have a value in it for this preference to work.</para>
9496 <screeninfo>Showing the 856u as an image</screeninfo>
9500 <imagedata fileref="images/admin/globalprefs/OPACDisplay856uAsImage.png"/>
9507 <para>Neither details or results page</para>
9511 <para>Results page only</para>
9516 <para>Not yet implemented</para>
9523 <para>Description:</para>
9527 <para>In addition to this option being set, the corresponding
9528 XSLT option must be turned on. Also, the corresponding 856q
9529 field must have a valid MIME image extension (e.g., "jpg") or
9530 MIME image type (i.e. starting with "image/"), or the generic
9531 indicator "img" entered in the field. When all of the
9532 requirements are met, an image file will be displayed instead
9533 of the standard link text. Clicking on the image will open it
9534 in the same way as clicking on the link text. When you click
9535 on the image it should open to full size, in the current
9536 window or in a new window depending on the value in the system
9537 pref <link linkend="OPACURLOpenInNewWindow">OPACURLOpenInNewWindow</link>.</para>
9540 <screeninfo>Sample 856 in MARC Record</screeninfo>
9544 <imagedata fileref="images/admin/globalprefs/856imagemarc.png"/>
9552 <section id="OpacExportOptions">
9553 <title><link linkend="OpacExportOptions">OpacExportOptions</link></title>
9555 <para>Default: <screenshot>
9556 <screeninfo>Default OpacExportOptions options</screeninfo>
9559 <imagedata fileref="images/admin/globalprefs/OpacExportOptions.png"/>
9562 </screenshot></para>
9564 <para>Asks: List export options that should be available from OPAC detail page :
9567 <para>Description:</para>
9571 <para>In the OPAC on the right of each bib record there is a
9572 menu that allows for saving the record in various formats.
9573 This patch will allow you to define which options are in the
9574 pull down menu. Available options are: BIBTEX (bibtex), Dublin
9575 Core (dc), MARCXML (marcxml), MARC-8 encoded MARC (marc8),
9576 Unicode/UTF-8 encoded MARC (utf8), Unicode/UTF-8 encoded MARC
9577 without local use -9xx, x9x, xx9- fields and subfields
9578 (marcstd), MODS (mods), and RIS (ris).</para>
9582 <section id="OPACFallback">
9583 <title><link linkend="OPACFallback">OPACFallback</link></title>
9584 <para>Default: bootstrap</para>
9585 <para>Asks: Use the ___ theme as the fallback theme on the OPAC. </para>
9586 <para>Description:<itemizedlist>
9588 <para>This preference has no use right now, as Koha has only one theme, but if
9589 your library has a custom theme it will show here as an option. The purpose of
9590 this preference is to provide a way to choose to what theme to fallback on when
9591 you have a partial theme in place.</para>
9593 </itemizedlist></para>
9596 <section id="OpacFavicon">
9597 <title><link linkend="OpacFavicon">OpacFavicon</link></title>
9599 <para>Asks: Use the image at ___ for the OPAC's favicon.
9601 <para>This should be a complete URL, starting with
9606 <para>Turn your logo into a favicon with the <ulink url="http://antifavicon.com/">Favicon Generator</ulink>.</para>
9609 <para>Description:</para>
9613 <para>The favicon is the little icon that appears next to the
9614 URL in the address bar in most browsers. The default value for
9615 this field (if left blank) is the small 'K' in the Koha
9619 <screeninfo>Default Koha Favicon</screeninfo>
9623 <imagedata fileref="images/admin/globalprefs/favicon.png"/>
9631 <section id="opacheader">
9632 <title><link linkend="opacheader">opacheader</link></title>
9634 <para>Asks: Include the following HTML in the header of all pages
9638 <screeninfo>Sample HTML to be displayed at the top of my
9643 <imagedata fileref="images/admin/globalprefs/opacheader-html.png"/>
9649 <para>This value will appear above the main content of your
9654 <screeninfo>OPAC display of the value from
9655 'opacheader'</screeninfo>
9659 <imagedata fileref="images/admin/globalprefs/opacheader.png"/>
9665 <para>Edit '<link linkend="LibraryName">LibraryName</link>' if
9666 you'd like to edit the contents of the <title> tag</para>
9669 <para>Learn more in the <link linkend="editableopac">OPAC Editable
9670 Regions</link> section.</para>
9673 <section id="OpacHighlightedWords">
9674 <title><link linkend="OpacHighlightedWords">OpacHighlightedWords & NotHighlightedWords</link></title>
9676 <para>OpacHighlightedWords Default: Don't highlight</para>
9677 <para>NotHighlightedWords Default: and|or|not</para>
9679 <para>Asks: ___ words the patron searched for in their search results and detail pages;
9680 To prevent certain words from ever being highlighted, enter a list of stopwords here
9681 ___ (separate columns with |) </para>
9683 <para>OpacHighlightedWords Values:</para>
9687 <para>Don't highlight</para>
9691 <para>Highlight</para>
9696 <section id="OpacKohaUrl">
9697 <title><link linkend="OpacKohaUrl">OpacKohaUrl</link></title>
9699 <para>Default: Don't show</para>
9701 <para>Values:</para>
9705 <para>Don't show</para>
9713 <para>Description:</para>
9717 <para>When this preference is set to 'Show' text will appear
9718 in the bottom right of the OPAC footer stating 'Powered by
9719 Koha' and linking to the official Koha website.</para>
9722 <screeninfo>Powered by Koha</screeninfo>
9726 <imagedata fileref="images/admin/globalprefs/OpacKohaUrl.png"/>
9733 <section id="OpacLangSelectorMode">
9734 <title><link linkend="OpacLangSelectorMode">OpacLangSelectorMode</link></title>
9735 <para>Default: only footer</para>
9736 <para>Asks: Display language selector on ___.</para>
9737 <para>Values:<itemizedlist>
9739 <para>both top and footer</para>
9742 <para>only footer</para>
9747 </itemizedlist>Description:<itemizedlist>
9749 <para>If you have the <link linkend="opaclanguagesdisplay">opaclanguagesdisplay</link> preference set to display language options in the
9750 public catlaog, then this preference will allow you to control where the
9751 language selector shows. You can choose to show it only on the top or bottom or
9752 in both places.</para>
9754 </itemizedlist></para>
9757 <section id="opaclayoutstylesheet">
9758 <title><link linkend="opaclayoutstylesheet">opaclayoutstylesheet</link></title>
9760 <para>Default: opac.css</para>
9762 <para>Asks: Use the CSS stylesheet /css/ ___ on all pages in the
9763 OPAC, instead of the default</para>
9765 <para>Description:</para>
9769 <para>This setting's function is to point to the *.css file
9770 used to define the OPAC layout. A *.css file is a cascading
9771 stylesheet which is used in conjunction with HTML to set how
9772 the HTML page is formatted and will look on the OPAC. There
9773 are two stylesheets that come with the system; opac.css and
9774 opac2.css. A custom stylesheet may also be used. The
9775 stylesheets listed in the opaclayoutstylesheet preference are
9776 held on the Koha server.</para>
9781 <para>Leave this field blank to disable it and let Koha use the
9782 default file instead</para>
9785 <para>Using a custom value in this preference causes Koha to completely ignore the
9786 default layout stylesheet.</para>
9789 <section id="OpacLocationBranchToDisplay">
9790 <title><link linkend="OpacLocationBranchToDisplay">OpacLocationBranchToDisplay</link></title>
9791 <para>Default: holding library</para>
9792 <para>Asks: Display the ___ for items on the OPAC record details page. </para>
9793 <para>Values:<itemizedlist>
9795 <para>holding library</para>
9798 <para>home and holding library</para>
9801 <para>home library</para>
9803 </itemizedlist></para>
9804 <para>Description:<itemizedlist>
9806 <para>Defines whether to display the holding library, the home library, or both
9807 for the opac details page.</para>
9809 </itemizedlist></para>
9811 <section id="OpacLocationBranchToDisplayShelving">
9812 <title><link linkend="OpacLocationBranchToDisplayShelving">OpacLocationBranchToDisplayShelving</link></title>
9813 <para>Default: holding library</para>
9814 <para>Asks: Display the shelving location under the ___ for items on the OPAC record
9815 details page. </para>
9816 <para>Values:</para>
9819 <para>holding library</para>
9822 <para>home and holding library</para>
9825 <para>home library</para>
9828 <para>Description:<itemizedlist>
9830 <para>Defines where the shelving location should be displayed, under the home
9831 library, the holding library, or both.</para>
9833 </itemizedlist></para>
9836 <section id="OpacMaintenance">
9837 <title><link linkend="OpacMaintenance">OpacMaintenance</link></title>
9839 <para>Default: Don't show</para>
9841 <para>Asks: ___ a warning that the OPAC is under maintenance,
9842 instead of the OPAC itself. <note>
9843 <para>this shows the same warning as when the database needs
9844 to be upgraded, but unconditionally.</para>
9847 <para>Description:</para>
9851 <para>This preference allows the system administrator to turn
9852 off the OPAC during maintenance and display a message to
9853 users. When this preference is switched to "Show" the OPAC is
9854 not usable. The text of this message is not editable at this
9859 <para>Values:</para>
9863 <para>Don't show</para>
9871 <para>When this preference is set to show the maintenance message the ability to
9872 search the OPAC is disabled and a message appears. The default message can be
9873 altered by using the <link linkend="OpacMaintenanceNotice">OpacMaintenanceNotice</link> preference.</para>
9876 <screeninfo>OPAC Maintenance Message</screeninfo>
9880 <imagedata fileref="images/admin/globalprefs/opacmaintenance.png"/>
9889 <section id="OpacMaintenanceNotice">
9890 <title><link linkend="OpacMaintenanceNotice">OpacMaintenanceNotice</link></title>
9891 <para>Asks: Show the following HTML when OpacMaintenance is enabled</para>
9892 <para>Descritpion:<itemizedlist>
9894 <para>This preference will allow you to set the text the OPAC displays when the
9895 <link linkend="OpacMaintenance">OpacMaintenance</link> preference is set to
9898 </itemizedlist></para>
9901 <section id="OpacMainUserBlock">
9902 <title><link linkend="OpacMainUserBlock">OpacMainUserBlock</link></title>
9904 <para>Default: Welcome to Koha... <hr></para>
9906 <para>Asks: Show the following HTML in its own column on the main
9907 page of the OPAC</para>
9909 <para>Description: </para>
9912 <para>HTML entered in this field will appear in the center of the main page of your
9918 <screeninfo>Sample OpacMainUserBlock appears below the search
9923 <imagedata fileref="images/admin/globalprefs/OpacMainUserBlock.png"/>
9928 <para>Learn more in the <link linkend="editableopac">OPAC Editable
9929 Regions</link> section.</para>
9931 <section id="OpacMaxItemsToDisplay">
9932 <title><link linkend="OpacMaxItemsToDisplay">OpacMaxItemsToDisplay</link></title>
9933 <para>Default: 50</para>
9934 <para>Asks: Display up to ___ items on the biblio detail page </para>
9935 <para>Description:<itemizedlist>
9937 <para>This preference will help with slow load times on the bibliographic detail
9938 pages by limiting the number of items to display by default. If the biblio has
9939 more items than this, a link is displayed instead that allows the user to choose
9940 to display all items.</para>
9942 </itemizedlist></para>
9945 <section id="OPACMySummaryHTML">
9946 <title><link linkend="OPACMySummaryHTML">OPACMySummaryHTML</link></title>
9948 <para>Asks: Include a "Links" column on the "my summary" tab when
9949 a user is logged in to the OPAC, with the following HTML (leave
9950 blank to disable).</para>
9952 <para>Description:</para>
9956 <para>In this preference you can enter HTML that will appear
9957 on the 'Checked Out' tab on the 'My Summary' section when
9958 logged in to the OPAC. The placeholders {BIBLIONUMBER},
9959 {TITLE}, {ISBN} and {AUTHOR} will be replaced with information
9960 from the displayed record. This can be used to enter in
9961 'share' links for social networks or generate searches against
9962 other library catalogs.</para>
9965 <screeninfo>Example of 'Links' column with a value in the
9966 OPACMySummaryHTML preference</screeninfo>
9970 <imagedata fileref="images/admin/globalprefs/OPACMySummaryHTML.png"/>
9977 <para>Sample Data:<programlisting><p><a href="http://www.facebook.com/sharer.php?u=http://YOUROPAC.ORG/cgi-bin/koha/opac-detail.pl?biblionumber={BIBLIONUMBER}">Share on Facebook</a>
9978 <br />TITLE: {TITLE}
9979 <br />AUTHOR: {AUTHOR}
9980 <br />ISBN: {ISBN}
9981 <br />BIBLIONUMBER: {BIBLIONUMBER}</p></programlisting></para>
9983 <section id="OPACMySummaryNote">
9984 <title><link linkend="OPACMySummaryNote">OPACMySummaryNote</link></title>
9985 <para>Asks: Note to display on the patron summary page. </para>
9986 <para>Description:<itemizedlist>
9988 <para>This preference will display text above the patron's summary and below the
9989 welcome message when the patron logs in to the OPAC and view their 'my summary' tab.<screenshot>
9990 <screeninfo>OPACMySummaryNote in the OPAC</screeninfo>
9993 <imagedata fileref="images/admin/globalprefs/OPACMySummaryNote.png"/>
9996 </screenshot></para>
9998 </itemizedlist></para>
10001 <section id="OpacNav">
10002 <title><link linkend="OpacNav">OpacNav</link></title>
10004 <para>Default: Important links here.</para>
10006 <para>Asks: Show the following HTML on the left hand column of the
10007 main page and patron account on the OPAC (generally navigation
10011 <screeninfo>Sample navigation links</screeninfo>
10015 <imagedata fileref="images/admin/globalprefs/OpacNav.png"/>
10020 <para>Learn more in the <link linkend="editableopac">OPAC Editable
10021 Regions</link> section.</para>
10024 <section id="OpacNavBottom">
10025 <title><link linkend="OpacNavBottom">OpacNavBottom</link></title>
10027 <para>Asks: Show the following HTML on the left hand column of the
10028 main page and patron account on the OPAC, after <link linkend="OpacNav">OpacNav</link>, and before patron account links
10029 if available:</para>
10031 <para>Description: When a patron is logged in to their account
10032 they see a series of tabs to access their account information.
10033 <link linkend="OpacNav">OpacNav</link> appears above this list of
10034 tabs and OpacNavBottom will appear below them. When not on the
10035 patron account pages the HTML in OpacNavBottom will just appear
10036 right below <link linkend="OpacNav">OpacNav</link>.</para>
10039 <screeninfo>OpacNav and OpacNavBottom on Patron
10040 Account</screeninfo>
10044 <imagedata fileref="images/admin/globalprefs/OpacNavBottom.png"/>
10050 <section id="OpacNavRight">
10051 <title><link linkend="OpacNavRight">OpacNavRight</link></title>
10053 <para>Asks: Show the following HTML in the right hand column of
10054 the main page under the main login form.</para>
10056 <para>Description: HTML entered in this preference will appear on
10057 the right hand side of the OPAC under the log in form. If the log
10058 in form is not visible this content will move up on the right
10062 <screeninfo>OpacNavRight</screeninfo>
10066 <imagedata fileref="images/admin/globalprefs/OpacNavRight.png"/>
10072 <section id="OPACNoResultsFound">
10073 <title><link linkend="OPACNoResultsFound">OPACNoResultsFound</link></title>
10075 <para>No Default</para>
10077 <para>Asks: Display this HTML when no results are found for a
10078 search in the OPAC</para>
10080 <para>This HTML will display below the existing notice that no
10081 results were found for your search.</para>
10084 <screeninfo>HTML in OPACNoResultsFound will appear below lines
10085 that look like this</screeninfo>
10089 <imagedata fileref="images/admin/globalprefs/OPACNoResultsFound.png"/>
10094 <para>You can insert placeholders {QUERY_KW} that will be replaced with the keywords
10095 of the query. </para>
10099 <section id="OpacPublic">
10100 <title><link linkend="OpacPublic">OpacPublic</link></title>
10102 <para>Default: Enable</para>
10104 <para>Asks: ___ Koha OPAC as public. Private OPAC requires
10105 authentication before accessing the OPAC.</para>
10107 <para>Values:</para>
10111 <para>Don't enable</para>
10115 <para>Enable</para>
10119 <para>Description:</para>
10123 <para>This preference determines if your OPAC is accessible
10124 and searchable by anyone or only by members of the library. If
10125 set to 'Don't enable' only members who are logged into the
10126 OPAC can search. Most libraries will leave this setting at its
10127 default of 'Enable' to allow their OPAC to be searched by
10128 anyone and only require login for access to personalized
10134 <section id="OPACResultsSidebar">
10135 <title><link linkend="OPACResultsSidebar">OPACResultsSidebar</link></title>
10137 <para>Asks: Include the following HTML under the facets in OPAC
10138 search results</para>
10140 <para>Description:</para>
10144 <para>The HTML entered in this preference will appear on the
10145 search results pages below the list of facets on the left side
10146 of the screen.</para>
10151 <section id="OPACSearchForTitleIn">
10152 <title><link linkend="OPACSearchForTitleIn">OPACSearchForTitleIn</link></title>
10154 <para>Default: <li><a
10155 href="http://worldcat.org/search?q={TITLE}"
10156 target="_blank">Other Libraries (WorldCat)</a></li>
10158 href="http://www.scholar.google.com/scholar?q={TITLE}"
10159 target="_blank">Other Databases (Google
10160 Scholar)</a></li> <li><a
10161 href="http://www.bookfinder.com/search/?author={AUTHOR}&title={TITLE}&st=xl&ac=qr"
10162 target="_blank">Online Stores
10163 (Bookfinder.com)</a></li></para>
10165 <para>Asks: Include a "More Searches" box on the detail pages of
10166 items on the OPAC, with the following HTML (leave blank to
10170 <para>The placeholders {BIBLIONUMBER}, {CONTROLNUMBER}, {TITLE},
10171 {ISBN}, {ISSN} and {AUTHOR} will be replaced with information
10172 from the displayed record.</para>
10175 <section id="OpacSeparateHoldings">
10176 <title><link linkend="OpacSeparateHoldings">OpacSeparateHoldings & OpacSeparateHoldingsBranch </link></title>
10177 <para>OpacSeparateHoldings default: Don't separate</para>
10178 <para>OpacSeparateHoldingsBranch default: home library </para>
10179 <para>Asks: ___ items display into two tabs, where the first tab contains items whose
10180 ___ is the logged in user's library. The second tab will contain all other items. </para>
10181 <para>OpacSeparateHoldings values:<itemizedlist>
10183 <para>Don't separate</para>
10186 <para>Separate</para>
10188 </itemizedlist></para>
10189 <para>OpacSeparateHoldingsBranch values:<itemizedlist>
10191 <para>holding library</para>
10194 <para>home library</para>
10196 </itemizedlist></para>
10197 <para>Description:<itemizedlist>
10199 <para>This preference lets you decide if you would like to have the holding
10200 information on the bibliographic detail page in the OPAC split in to multiple
10201 tabs. The default is to show all holdings on one tab.</para>
10203 <screeninfo>Separate holdings tabs</screeninfo>
10206 <imagedata fileref="images/admin/globalprefs/OpacSeparateHoldings.png"/>
10211 </itemizedlist></para>
10214 <section id="OPACShowBarcode">
10215 <title><link linkend="OPACShowBarcode">OPACShowBarcode</link></title>
10217 <para>Default: Don't show</para>
10219 <para>Asks: ___ the item's barcode on the holdings tab.</para>
10221 <para>Values:</para>
10225 <para>Don't show</para>
10228 <screeninfo>Barcode not shown in the OPAC</screeninfo>
10232 <imagedata fileref="images/admin/globalprefs/OPACShowBarcode-noshow.png"/>
10242 <screeninfo>Barcode shown in the OPAC</screeninfo>
10246 <imagedata fileref="images/admin/globalprefs/OPACShowBarcode-show.png"/>
10253 <para>Description:</para>
10257 <para>This preference allows you to control whether patrons
10258 can see items' barcodes in the OPAC.</para>
10263 <section id="OPACShowCheckoutName">
10264 <title><link linkend="OPACShowCheckoutName">OPACShowCheckoutName</link></title>
10266 <para>Default: Don't show</para>
10268 <para>Asks: ___ the name of the patron that has an item checked
10269 out on item detail pages on the OPAC.</para>
10271 <para>Values:</para>
10275 <para>Don't show</para>
10283 <para>Description:</para>
10287 <para>This preference allows all patrons to see who has the
10288 item checked out if it is checked out. In small corporate
10289 libraries (where the OPAC is behind a firewall and not
10290 publicly available) this can be helpful so coworkers can just
10291 contact the patron with the book themselves. In larger public
10292 and academic libraries setting this to 'Show' would pose
10293 serious privacy issues.</para>
10298 <section id="OPACShowHoldQueueDetails">
10299 <title><link linkend="OPACShowHoldQueueDetails">OPACShowHoldQueueDetails</link></title>
10301 <para>Default: Don't show any hold details</para>
10303 <para>Asks: ___ to patrons in the OPAC.</para>
10305 <para>Values:</para>
10309 <para>Don't show any hold details</para>
10313 <para>Show holds</para>
10316 <screeninfo>The holdings table on the bibliographic record
10317 will show the number of holds</screeninfo>
10321 <imagedata fileref="images/admin/globalprefs/OPACShowHoldQueueDetails-showholds.png"/>
10328 <para>Show holds and priority level</para>
10332 <para>Show priority level</para>
10335 <screeninfo>Patron record in the OPAC shows where in line
10336 the patron waits for their hold.</screeninfo>
10340 <imagedata fileref="images/admin/globalprefs/OPACShowHoldQueueDetails-priority.png"/>
10347 <para><link linkend="opacuserlogin">opacuserlogin</link>
10348 needs to be set to 'allow'</para>
10355 <section id="OpacShowRecentComments">
10356 <title><link linkend="OpacShowRecentComments">OpacShowRecentComments</link></title>
10358 <para>Default: Don't show</para>
10360 <para>Asks: ___ a link to recent comments in the OPAC
10363 <para>Values:</para>
10367 <para>Don't show</para>
10375 <para>Description:</para>
10379 <para>If you have chosen to allow comments in your OPAC by
10380 setting <link linkend="reviewson">reviewson</link> to 'Allow'
10381 you can include a link to the recent comments under the search
10382 box at the top of your OPAC with this preference.</para>
10385 <screeninfo>Recent Comments link on OPAC</screeninfo>
10389 <imagedata fileref="images/admin/globalprefs/OpacShowRecentComments.png"/>
10397 <section id="OPACShowUnusedAuthorities">
10398 <title><link linkend="OPACShowUnusedAuthorities">OPACShowUnusedAuthorities</link></title>
10400 <para>Default: Show</para>
10402 <para>Asks: ___ unused authorities in the OPAC authority
10405 <para>Values:</para>
10409 <para>Do not show</para>
10418 <para>Requires that the <link linkend="OpacAuthorities">OpacAuthorities</link>
10419 preference is set to 'Allow'</para>
10426 <para>Description:</para>
10430 <para>When patrons search your authority file via the OPAC
10431 they will see all authorities in your system even if you don't
10432 have them linked to any bibliographic records. This preference
10433 lets you determine what the default behavior is when searching
10434 authorities via the OPAC. If you choose 'Do not show' it will
10435 only show patrons authority records that are linked to bib
10436 records in the search results. Otherwise the system will show
10437 all authority records even if they aren't linked to
10443 <section id="OpacStarRatings">
10444 <title><link linkend="OpacStarRatings">OpacStarRatings</link></title>
10446 <para>Default: no</para>
10448 <para>Asks: Show star-ratings on ___ pages.</para>
10450 <para>Values:</para>
10458 <para>only details</para>
10461 <screeninfo>Star Ratings on the Details Page</screeninfo>
10465 <imagedata fileref="images/admin/globalprefs/OpacStarRatings-details.png"/>
10472 <para>results and details</para>
10475 <screeninfo>OPAC Star Ratings on the Search
10476 Results</screeninfo>
10480 <imagedata fileref="images/admin/globalprefs/OpacStarRatings-results.png"/>
10487 <para>Description:</para>
10491 <para>Star ratings are a way for your patrons to leave ratings
10492 without having to leave a full review. Patrons who are not
10493 logged in will only be able to see the stars, once logged in
10494 patrons can click on the stars on the details page to leave
10495 their own rating. Clicking on the stars on the search results
10496 will not submit a rating.</para>
10500 <section id="OpacSuggestionManagedBy">
10501 <title><link linkend="OpacSuggestionManagedBy">OpacSuggestionManagedBy</link></title>
10502 <para>Default: Show</para>
10503 <para>Asks: ___ the name of the staff member who managed a suggestion in OPAC. </para>
10504 <para>Values:<itemizedlist>
10506 <para>Don't show</para>
10511 </itemizedlist></para>
10512 <para>Description:<itemizedlist>
10514 <para>If you're <link linkend="suggestionspref">allowing patrons to make purchase
10515 suggestions</link> then they will see the 'my suggestions' tab when logged in.
10516 This tab shows the patron the librarian who approved or rejected the purchase
10517 suggestion. This preference controls if the patron sees the librarian's name or
10520 </itemizedlist></para>
10523 <section id="opacthemes">
10524 <title><link linkend="opacthemes">opacthemes</link></title>
10526 <para>Default: bootstrap</para>
10528 <para>Asks: Use the ___ theme on the OPAC.</para>
10530 <para>Values:</para>
10534 <para>bootstrap</para>
10537 <screeninfo>Bootstrap Theme</screeninfo>
10540 <imagedata fileref="images/admin/globalprefs/opacthemes-bootstrap.png"/>
10545 <para>This theme is completely responsive</para>
10550 <section id="OPACURLOpenInNewWindow">
10551 <title><link linkend="OPACURLOpenInNewWindow">OPACURLOpenInNewWindow</link></title>
10553 <para>Default: don't</para>
10555 <para>Asks: When patrons click on a link to another website from
10556 your OPAC (like Amazon or OCLC), ___ open the website in a new
10559 <para>Values:</para>
10571 <para>Description:</para>
10575 <para>This preference determines if URLs in the OPAC will open
10576 in a new window or not. When clicking on a link in the OPAC, a
10577 patron does not need to worry about navigating away from their
10578 search results.</para>
10583 <section id="OPACUserCSS">
10584 <title><link linkend="OPACUserCSS">OPACUserCSS</link></title>
10586 <para>Asks: Include the following CSS on all pages in the
10589 <para>Description:</para>
10593 <para>OPACUserCSS allows the administrator to enter styles that will overwrite the
10594 OPAC's default CSS as defined in 'opaclayoutstylesheet' or 'opacstylesheet'.
10595 Styles may be entered for any of the selectors found in the default style sheet.
10596 The default stylesheet will likely be found at
10597 http://your_koha_address/opac-tmpl/bootstrap/css/opac.css. Unlike <link linkend="OpacAdditionalStylesheet">OpacAdditionalStylesheet</link> and <link linkend="opaclayoutstylesheet">opaclayoutstylesheet</link> this preference will
10598 embed the CSS directly on your OPAC pages.</para>
10603 <section id="opacuserjs">
10604 <title><link linkend="opacuserjs">OPACUserJS</link></title>
10606 <para>Asks: Include the following JavaScript on all pages in the
10610 <screeninfo>OPAC login box before OPACUserJS edit</screeninfo>
10614 <imagedata fileref="images/admin/globalprefs/opacuserjs-before.png"/>
10620 <screeninfo>JavaScript in OPACUserJS to change the OPAC login box</screeninfo>
10624 <imagedata fileref="images/admin/globalprefs/opacuserjs.png"/>
10630 <screeninfo>New OPAC login box after editing OPACUserJS</screeninfo>
10634 <imagedata fileref="images/admin/globalprefs/opacuserjs-after.png"/>
10639 <para>Description:</para>
10643 <para>This preference allows the administrator to enter
10644 JavaScript or JQuery that will be embedded across all pages of
10645 the OPAC. Administrators may use this preference to customize
10646 some of the interactive sections of Koha, customizing the text
10647 for the login prompts, for example. Sample JQuery scripts used
10648 by Koha libraries can be found on the wiki: <ulink url="http://wiki.koha-community.org/wiki/JQuery_Library">http://wiki.koha-community.org/wiki/JQuery_Library</ulink>.</para>
10653 <section id="OPACXSLTDetailsDisplay">
10654 <title><link linkend="OPACXSLTDetailsDisplay">OPACXSLTDetailsDisplay</link></title>
10656 <para>Default: default</para>
10658 <para>Asks: Display OPAC details using XSLT stylesheet at
10661 <para>Values:</para>
10665 <para>leave empty to not use the XSLT stylesheet</para>
10669 <para>In previous versions of Koha this was the setting
10670 that read 'normally'</para>
10676 <para>enter "default" for the default one</para>
10680 <para>put a path to define a XSLT file</para>
10684 <para>ex: /path/to/koha/and/your/stylesheet.xsl</para>
10688 <para>If in a multi-language system you can enter
10689 {langcode} in the path to tell Koha to look in the right
10690 language folder</para>
10695 /home/koha/src/koha-tmpl/opac-tmpl/bootstrap/{langcode}/xslt/MARC21slim2OPACDetail.xsl</para>
10700 http://mykohaopac.org/{langcode}/stylesheet.xsl</para>
10708 <para>put an URL for an external specific stylesheet</para>
10712 <para>ex: http://mykohaopac.org/stylesheet.xsl</para>
10718 <para>Description:</para>
10722 <para>XSLT stylesheets allow for the customization of the
10723 details shows on the screen when viewing a bib record. This
10724 preference will allow you either use the default look that
10725 comes with Koha or design your own stylesheet.</para>
10730 <section id="OPACXSLTResultsDisplay">
10731 <title><link linkend="OPACXSLTResultsDisplay">OPACXSLTResultsDisplay</link></title>
10733 <para>Default: default</para>
10735 <para>Asks: Display OPAC results using XSLT stylesheet at
10738 <para>Values:</para>
10742 <para>leave empty to not use the XSLT stylesheet</para>
10746 <para>In previous versions of Koha this was the setting
10747 that read 'normally'</para>
10753 <para>enter "default" for the default one</para>
10757 <para>put a path to define a XSLT file</para>
10761 <para>ex: /path/to/koha/and/your/stylesheet.xsl</para>
10765 <para>If in a multi-language system you can enter
10766 {langcode} in the path to tell Koha to look in the right
10767 language folder</para>
10772 /home/koha/src/koha-tmpl/opac-tmpl/bootstrap/{langcode}/xslt/MARC21slim2OPACResults.xsl</para>
10777 http://mykohaopac.org/{langcode}/stylesheet.xsl</para>
10785 <para>put an URL for an external specific stylesheet</para>
10789 <para>ex: http://mykohaopac.org/stylesheet.xsl</para>
10795 <para>Description:</para>
10799 <para>XSLT stylesheets allow for the customization of the
10800 details shows on the screen when viewing the search results.
10801 This preference will allow you either use the default look
10802 that comes with Koha or design your own stylesheet.</para>
10808 <section id="opacfeaturesprefs">
10809 <title><link linkend="opacfeaturesprefs">Features</link></title>
10813 <section id="numSearchRSSResults">
10814 <title><link linkend="numSearchRSSResults">numSearchRSSResults</link></title>
10816 <para>Default: 50</para>
10818 <para>Asks: Display ___ search results in the RSS feed.</para>
10820 <para>Description:</para>
10824 <para>By default the RSS feed that is automatically generated
10825 for every search results page will list 50 items. This can
10826 sometimes be too much for some RSS feed readers and for some
10827 people this isn't enough. This preference allows you to adjust
10828 this number to show the best number of results for your
10833 <section id="OPACAcquisitionDetails">
10834 <title><link linkend="OPACAcquisitionDetails">OPACAcquisitionDetails</link></title>
10835 <para>Default: Don't display</para>
10836 <para>Asks: ___ the acquisition details on OPAC detail pages.</para>
10837 <para>Values:<itemizedlist>
10839 <para>Display<screenshot>
10840 <screeninfo>Acquisitions details in the OPAC</screeninfo>
10843 <imagedata fileref="images/admin/globalprefs/OPACAcquisitionDetails.png"/>
10846 </screenshot></para>
10849 <para>Don't display</para>
10851 </itemizedlist></para>
10852 <para>Description:<itemizedlist>
10854 <para>This preference shows the patrons how many items are on order in the
10855 Holdings tab if you have the <link linkend="AcqCreateItem">AcqCreateItem</link>
10856 set to 'cataloging the record'</para>
10858 </itemizedlist></para>
10861 <section id="OpacAuthorities">
10862 <title><link linkend="OpacAuthorities">OpacAuthorities</link></title>
10864 <para>Default: Allow</para>
10866 <para>Asks: ___ patrons to search your authority records.</para>
10868 <para>Description:</para>
10872 <para>This preference displays the link on the OPAC for the authority search. By
10873 setting the preference to "Allow" patrons can use this search link of the
10878 <para>Values:</para>
10886 <para>A link labeled 'Authority search' will appear at the top of your OPAC
10887 under the search box</para>
10890 <screeninfo>'Browse by Subject' link under search box on
10895 <imagedata fileref="images/admin/globalprefs/authoritysearch.png"/>
10904 <para>Don't allow</para>
10909 <section id="opacbookbag">
10910 <title><link linkend="opacbookbag">opacbookbag</link></title>
10912 <para>Default: Allow</para>
10914 <para>Asks: ___ patrons to store items in a temporary "Cart" on
10917 <para>Values:</para>
10925 <para>Don't allow</para>
10929 <para>Description:</para>
10933 <para>This preference allows the user to temporarily save a
10934 list of items found on the catalog. By using the Book Bag, or
10935 Cart, the user can print out or email a list of items found.
10936 The user does not need to be logged in. This list is temporary
10937 and will be emptied, or cleared, at the end of the
10943 <section id="OpacBrowser">
10944 <title><link linkend="OpacBrowser">OpacBrowser</link></title>
10947 <para>This preference only applies to French systems at this
10951 <para>Default: Don't allow</para>
10953 <para>Asks: ___ patrons to browse subject authorities on
10956 <para>Values:</para>
10964 <para>Don't allow</para>
10969 <para>run the <link linkend="authbrowsercron">Authorities
10970 Browser Cron Job</link> to create the browser list</para>
10971 </important></para>
10974 <section id="OpacBrowseResults">
10975 <title><link linkend="OpacBrowseResults">OpacBrowseResults</link></title>
10977 <para>Default: enable</para>
10979 <para>Asks: ___ browsing and paging search results from the OPAC
10980 detail page.</para>
10982 <para>Values:</para>
10986 <para>disable</para>
10990 <para>enable</para>
10993 <screeninfo>Browsing and Paging Search Results</screeninfo>
10997 <imagedata fileref="images/admin/globalprefs/OpacBrowseResults.png"/>
11004 <para>Description:</para>
11008 <para>This preference will control the option to return to
11009 your results and/or browse them from the detail page in the
11014 <section id="OpacCloud">
11015 <title><link linkend="OpacCloud">OpacCloud</link></title>
11017 <para>This preference only applies to French systems at this time.</para>
11018 </important>Default: Don't show</para>
11019 <para>Asks: ___ a subject cloud on OPAC</para>
11020 <para>Values:<itemizedlist>
11022 <para>Don't show</para>
11027 </itemizedlist></para>
11030 <para>run the <link linkend="authbrowsercron">Authorities Browser Cron Job</link> to
11031 create the browser list</para>
11036 <section id="OPACFinesTab">
11037 <title><link linkend="OPACFinesTab">OPACFinesTab</link></title>
11039 <para>Default: Allow</para>
11041 <para>Asks: ___ patrons to access the Fines tab on the My Account
11042 page on the OPAC.</para>
11044 <para>Values:</para>
11052 <para><link linkend="opacuserlogin">opacuserlogin</link>
11053 needs to be set to 'allow'</para>
11059 <para>Don't allow</para>
11063 <section id="OpacHoldNotes">
11064 <title><link linkend="OpacHoldNotes">OpacHoldNotes</link></title>
11065 <para>Default: Do not allow</para>
11066 <para>Asks: ___ users to add a note when placing a hold.</para>
11067 <para>Values:<itemizedlist>
11071 <screeninfo>Holds notes in the OPAC</screeninfo>
11074 <imagedata fileref="images/admin/globalprefs/OpacHoldNotes.png"/>
11080 <para>Do not allow</para>
11082 </itemizedlist></para>
11084 <section id="OPACISBD">
11085 <title><link linkend="OPACISBD">OPACISBD</link></title>
11086 <para>Default: <link linkend="opacisbdmarcdefault">MARC21
11087 Default Appendix</link>
11089 <para>Asks: Use the following as the OPAC ISBD template:</para>
11090 <para>Description:</para>
11093 <para>This determines how the ISBD information will display in the OPAC. Elements in
11094 the list can be reordered to produce a different ISBD view. ISBD, the
11095 International Standard Bibliographic Description, was first introduced by IFLA
11096 (International Federation of Library Associations) in 1969 in order to provide
11097 guidelines for descriptive cataloging. The purpose of ISBD is to aid the
11098 international exchange of bibliographic records for a variety of materials.</para>
11102 <section id="OpacItemLocation">
11103 <title><link linkend="OpacItemLocation">OpacItemLocation</link></title>
11104 <para>Default: call number only</para>
11105 <para>Asks: Show ____ for items on the OPAC search results.</para>
11106 <para>Values:<itemizedlist>
11108 <para>call number only</para>
11111 <para>collection code</para>
11114 <para>location</para>
11116 </itemizedlist></para>
11117 <para>Description: </para>
11120 <para>This setting allows users of the OPAC results XSLT stylesheet to choose to
11121 display collection code or location in addition to call number.</para>
11126 <section id="OpacPasswordChange">
11127 <title><link linkend="OpacPasswordChange">OpacPasswordChange</link></title>
11129 <para>Default: Allow</para>
11131 <para>Asks: ___ patrons to change their own password on the
11134 <para>Values:</para>
11142 <para><link linkend="opacuserlogin">opacuserlogin</link>
11143 needs to be set to 'allow'</para>
11149 <para>Don't allow</para>
11154 <para>Enabling this will break LDAP authentication.</para>
11158 <section id="OPACPatronDetails">
11159 <title><link linkend="OPACPatronDetails">OPACPatronDetails</link></title>
11161 <para>Default: Allow</para>
11163 <para>Asks: ___ patrons to notify the library of changes to their
11164 contact information from the OPAC.</para>
11166 <para>Values:</para>
11174 <para><link linkend="opacuserlogin">opacuserlogin</link>
11175 needs to be set to 'allow'</para>
11181 <para>Don't allow</para>
11185 <para>Description:</para>
11189 <para>If patrons are allowed to notify the library of changes to their account then
11190 staff will need to approve the changes via the staff client. Notification of
11191 patron account requests will appear on the dashaboard below the list of modules
11192 with other pending actions.</para>
11194 <screeninfo>Patrons requesting modifications</screeninfo>
11197 <imagedata fileref="images/admin/globalprefs/OPACPatronDetails.png"/>
11201 <para>Once you click the notification you will be presented with the changes the
11202 patron would like to make to their account and from there you can choose how to
11205 <screeninfo>Patrons modifications</screeninfo>
11208 <imagedata fileref="images/admin/globalprefs/OPACPatronDetails-approve.png"/>
11213 <para>You can control what fields patrons see and can modify via the OPAC by
11214 setting the <link linkend="PatronSelfRegistrationBorrowerMandatoryField">PatronSelfRegistrationBorrowerMandatoryField</link>
11215 <link linkend="PatronSelfRegistrationBorrowerUnwantedField">PatronSelfRegistrationBorrowerUnwantedField</link> preferences.</para>
11221 <section id="OPACpatronimage">
11222 <title><link linkend="OPACpatronimage">OPACpatronimage</link></title>
11224 <para>Default: Don't show</para>
11226 <para>Asks: ___ patron images on the patron information page in
11229 <para>Values:</para>
11233 <para>Don't show</para>
11241 <para>Description:</para>
11245 <para>If <link linkend="patronimages">patronimages</link> is
11246 set to allow the upload of patron images via the staff client,
11247 then setting this preference to 'show' will show the patron
11248 what image you have on file for them when they view their
11249 personal information on their account in the OPAC.</para>
11253 <section id="OPACPopupAuthorsSearch">
11254 <title><link linkend="OPACPopupAuthorsSearch">OPACPopupAuthorsSearch</link></title>
11255 <para>Default: Don't display</para>
11256 <para>Asks: ___ the list of authors/subjects in a popup for a combined search on OPAC
11257 detail pages.</para>
11258 <para>Values:<itemizedlist>
11260 <para>Display</para>
11263 <screeninfo>Subject search pop up</screeninfo>
11266 <imagedata fileref="images/admin/globalprefs/OPACPopupAuthorsSearch.png"/>
11273 <para>This will only display the pop up if you are not using an XSLT
11274 stylesheet. Review your <link linkend="OPACXSLTDetailsDisplay">OPACXSLTDetailsDisplay</link> to find out what stylesheet you're
11282 <para>Don't display<itemizedlist>
11284 <para>Authors and subjects will display as search links instead of pop up
11287 </itemizedlist></para>
11289 </itemizedlist></para>
11290 <para>Description:<itemizedlist>
11292 <para>If this preference is set to 'Display' then clicking a subject or author
11293 from the details page in the OPAC will present the searcher with a pop up box.
11294 From this box you can check off any of the subjects or authors listed and search
11295 them all at once by clicking 'Search' at the bottom of the pop up. The default
11296 behavior is for Koha to search just the clicked author or subject.</para>
11298 </itemizedlist></para>
11300 <section id="OpacResetPassword">
11301 <title><link linkend="OpacResetPassword">OpacResetPassword</link></title>
11302 <para>Default: not allowed</para>
11303 <para>Asks: Library users are ___ to recover their password via e-mail in the
11305 <para>Values:<itemizedlist>
11307 <para>allowed<screenshot>
11308 <screeninfo>Forgot your password link</screeninfo>
11311 <imagedata fileref="images/admin/globalprefs/OpacResetPassword.png"/>
11314 </screenshot></para>
11317 <para>not allowed</para>
11319 </itemizedlist></para>
11320 <para>Description:<itemizedlist>
11322 <para>This preference controls whether you present users of the public catalog
11323 with a 'Forgot your password' link or not. Learn more in the <link linkend="resetpwopac">OPAC section</link> of this manual.</para>
11325 </itemizedlist></para>
11328 <section id="OpacTopissue">
11329 <title><link linkend="OpacTopissue">OpacTopissue</link></title>
11331 <para>Default: Don't allow</para>
11333 <para>Asks: ___ patrons to access a list of the most checked out
11334 items on the OPAC.</para>
11336 <para>Values:</para>
11344 <para>A link to 'Most Popular' will appear at the top of
11348 <screeninfo>'Most Popular' link under the search
11353 <imagedata fileref="images/admin/globalprefs/OpacTopissue.png"/>
11362 <para>Don't allow</para>
11366 <para>Description:</para>
11370 <para>This preference allows the administrator to choose to
11371 show the "Most Popular" link at the top of the OPAC under the
11372 search box. The "Most Popular" page shows the top circulated
11373 items in the library, as determined by the number of times a
11374 title has been circulated. This allows users to see what
11375 titles are popular in their community. It is recommended that
11376 you leave this preference set to 'Don't allow' until you have
11377 been live on Koha for a couple of months, otherwise the data
11378 that it shows will not be an accurate portrayal of what's
11379 popular in your library.</para>
11382 <screeninfo>Sample top issues page</screeninfo>
11386 <imagedata fileref="images/admin/globalprefs/topissues.png"/>
11394 <section id="opacuserlogin">
11395 <title><link linkend="opacuserlogin">opacuserlogin</link></title>
11397 <para>Default: Allow</para>
11399 <para>Asks: ___ patrons to log in to their accounts on the
11402 <para>Values:</para>
11410 <para>Don't allow</para>
11414 <para>The OPAC will still be searchable if patrons can't
11415 log in, this just disables the patron account access via
11423 <section id="QuoteOfTheDay">
11424 <title><link linkend="QuoteOfTheDay">QuoteOfTheDay</link></title>
11426 <para>Default: Disable</para>
11428 <para>Asks: ___ Quote of the Day display on OPAC home page</para>
11430 <para>Values:</para>
11434 <para>Disable</para>
11438 <para>Enable</para>
11442 <para>Description:</para>
11446 <para>This feature will allow you to enter a series of quotes
11447 that will then show on the OPAC homepage in random order. To
11448 add/edit quotes, visit the <link linkend="QOTDEditor">Quote of
11449 the Day Editor</link> under Tools.</para>
11454 <section id="RequestOnOpac">
11455 <title><link linkend="RequestOnOpac">RequestOnOpac</link></title>
11457 <para>Default: Allow</para>
11459 <para>Asks: ___ patrons to place holds on items from the
11462 <para>Values:</para>
11470 <para><link linkend="opacuserlogin">opacuserlogin</link>
11471 needs to be set to 'allow'</para>
11477 <para>Don't allow</para>
11482 <section id="reviewson">
11483 <title><link linkend="reviewson">reviewson</link></title>
11485 <para>Default: Allow</para>
11487 <para>Asks: ___ patrons to make comments on items on the
11490 <para>Values:</para>
11498 <para>Patrons comments/reviews all require moderation
11499 before they appear in the OPAC</para>
11503 <para><link linkend="opacuserlogin">opacuserlogin</link>
11504 needs to be set to 'Allow'</para>
11510 <para>Don't allow</para>
11514 <para>Description:</para>
11518 <para>This button allows the patrons to submit comments on
11519 books they have read via the OPAC. If this preference is set
11520 to "Allow" reviews are first sent to the staff client for
11521 staff approval before the review is displayed in the OPAC. The
11522 staff member who reviews and approves comments may find the
11523 pending comments on the <link linkend="comments">Comments</link> tool. The staff member can
11524 then choose to approve or delete the comments.</para>
11529 <section id="ShowReviewer">
11530 <title><link linkend="ShowReviewer">ShowReviewer</link></title>
11532 <para>Default: full name</para>
11534 <para>Asks: Show ___ of commenter with comments in OPAC.</para>
11536 <para>Values:</para>
11540 <para>first name</para>
11544 <para>first name and last initial</para>
11548 <para>full name</para>
11552 <para>last name</para>
11556 <para>no name</para>
11560 <para>username</para>
11564 <para>Description:</para>
11568 <para>If you would like to protect your patron's privacy in
11569 the OPAC you can choose to hide their names or parts of their
11570 names from any of the comments they leave on bib records in
11571 your system. <link linkend="reviewson">reviewson</link> needs
11572 to be set to 'Allow' for this to preference to come in to
11578 <section id="ShowReviewerPhoto">
11579 <title><link linkend="ShowReviewerPhoto">ShowReviewerPhoto</link></title>
11581 <para>Default: Show</para>
11583 <para>Asks: ___ reviewer's photo beside comments in OPAC.</para>
11585 <para>Values:</para>
11597 <para><link linkend="reviewson">reviewson</link> needs to
11598 be set to 'Allow' and <link linkend="ShowReviewer">ShowReviewer</link> needs to be set
11599 to 'Show' for this to preference to come in to play</para>
11602 <screeninfo>ShowReviewerPhoto set to 'Show'</screeninfo>
11606 <imagedata fileref="images/admin/globalprefs/ShowReviewerPhoto.png"/>
11615 <para>Description:</para>
11619 <para>This system preference allows libraries to show avatars
11620 next to patron's comments in the OPAC. These avatars are
11621 pulled from the <ulink url="https://www.libravatar.org">Libravatar</ulink> library,
11622 an open source powered product that allows Internet users to
11623 choose a small icon to display next to their name on various
11624 different websites. The library has no control over the images
11625 the patron chooses to display.</para>
11630 <section id="SocialNetworks">
11631 <title><link linkend="SocialNetworks">SocialNetworks</link></title>
11633 <para>Default: Disable</para>
11635 <para>Asks: ___ social network links in opac detail pages</para>
11637 <para>Values:</para>
11641 <para>Disable</para>
11645 <para>Enable</para>
11648 <screeninfo>Social Networks</screeninfo>
11652 <imagedata fileref="images/admin/globalprefs/SocialNetworks.png"/>
11659 <para>Description:</para>
11663 <para>This preference will enable a line of social network
11664 share buttons below the right hand column on the detail pages
11665 of records in the OPAC.</para>
11670 <para>In order for these share buttons to work when clicked you
11671 must have filled in your <link linkend="OPACBaseURL">OPACBaseURL</link> preference.</para>
11675 <section id="suggestionspref">
11676 <title><link linkend="suggestionspref">suggestion</link></title>
11678 <para>Default: Allow</para>
11680 <para>Asks: ___ patrons to make purchase suggestions on the
11683 <para>Values:</para>
11691 <para><link linkend="opacuserlogin">opacuserlogin</link>
11692 needs to be set to 'allow' unless <link linkend="AnonSuggestions">AnonSuggestions</link> is set to
11699 <para>Don't allow</para>
11704 <section id="opacpayments">
11705 <title><link linkend="opacpayments">Payments</link></title>
11706 <para>These preferences will allow you control the tools you use to accept online payments
11707 from your patrons via the OPAC.</para>
11708 <section id="EnablePayPalOpacPayments">
11709 <title><link linkend="EnablePayPalOpacPayments">EnablePayPalOpacPayments & PayPalSandboxMode</link></title>
11710 <para>EnablePayPalOpacPayments Default: Don't all</para>
11711 <para>PayPalSandboxMode Default: Sandbox</para>
11712 <para>Asks: ___ patrons to make payments from the OPAC via PayPal in ___ mode. </para>
11713 <para>EnablePayPalOpacPayments values:<itemizedlist>
11718 <para>Don't allow</para>
11720 </itemizedlist></para>
11721 <para>PayPalSandboxMode values:<itemizedlist>
11723 <para>Production<itemizedlist>
11725 <para>Visit <ulink url="https://developer.paypal.com/">https://developer.paypal.com/</ulink> to get information for accepting
11726 payments in production</para>
11728 </itemizedlist></para>
11731 <para>Sandbox<itemizedlist>
11733 <para>Visit <ulink url="https://developer.paypal.com/developer/accounts/">https://developer.paypal.com/developer/accounts/</ulink> to get
11734 information for your sandbox account</para>
11736 </itemizedlist></para>
11738 </itemizedlist></para>
11739 <para>Description:<itemizedlist>
11741 <para>This preference will allow you to accept credit card payments via the OPAC
11742 for fines via PayPal. You will need to set up your PayPal account and it is
11743 recommended that you run tests before using this in production. </para>
11745 </itemizedlist></para>
11747 <para>PayPayl's terms of service state that you cannot charge your patrons for the
11748 processing fees and so this plugin will not add additional fees to the
11752 <section id="PayPalChargeDescription">
11753 <title><link linkend="PayPalChargeDescription">PayPalChargeDescription</link></title>
11754 <para>Default: Koha fee payment</para>
11755 <para>Asks: The patron should see the charge description as ___</para>
11756 <para>Description<itemizedlist>
11758 <para>This preference controls what the patron will see on their PayPal
11759 account/Bank account for this charge.</para>
11761 </itemizedlist></para>
11763 <section id="PayPalPwd">
11764 <title><link linkend="PayPalPwd">PayPalPwd</link></title>
11765 <para>Asks: The password for the PayPal account to receive payments is ___</para>
11767 <section id="PayPalSignature">
11768 <title><link linkend="PayPalSignature">PayPalSignature</link></title>
11769 <para>Asks: The signature for the PayPal account to receive payments is ___</para>
11771 <section id="PayPalUser">
11772 <title><link linkend="PayPalUser">PayPalUser</link></title>
11773 <para>Asks: The email address to receive PayPal payments is ___</para>
11777 <section id="opacpolicyprefs">
11778 <title><link linkend="opacpolicyprefs">Policy</link></title>
11782 <section id="AllowPurchaseSuggestionBranchChoice">
11783 <title><link linkend="AllowPurchaseSuggestionBranchChoice">AllowPurchaseSuggestionBranchChoice</link></title>
11785 <para>Default: Don't allow</para>
11787 <para>Asks: ___ patrons to select branch when making a purchase
11790 <para>Values:</para>
11798 <para>Don't allow</para>
11802 <para>Description:</para>
11806 <para>If your library system lets patrons make purchase
11807 suggestions for a specific branch you can set this preference
11808 to 'Allow' to add a branch selection option to the purchase
11809 suggestion form.</para>
11813 <section id="BlockExpiredPatronOpacActions">
11814 <title><link linkend="BlockExpiredPatronOpacActions">BlockExpiredPatronOpacActions</link></title>
11815 <para>Default: Don't block</para>
11816 <para>Asks: ___ expired patrons from OPAC actions such as placing a hold or renewing. </para>
11817 <para>Values:<itemizedlist>
11822 <para>Don't block</para>
11824 </itemizedlist></para>
11825 <para>Description:<itemizedlist>
11827 <para>This preference lets you set a default value for how Koha handles
11828 permissions for patrons who are expired. This preference can be overwritten by
11829 the setting on <link linkend="patcats">individual patron
11830 categories</link>.</para>
11832 </itemizedlist></para>
11835 <section id="OpacAllowPublicListCreation">
11836 <title><link linkend="OpacAllowPublicListCreation">OpacAllowPublicListCreation</link></title>
11838 <para>Default: Allow</para>
11840 <para>Asks: ___ opac users to create public lists</para>
11842 <para>Values:</para>
11850 <para>Don't allow</para>
11854 <para>Description:</para>
11858 <para>Public lists are visible to anyone who visits your OPAC.
11859 With this preference you can control whether or now patrons
11860 are allowed to create these public lists. If this is set to
11861 "Don't allow" then only staff will be able to create public
11867 <para>This preference will only be taken in to account if you
11868 have <link linkend="virtualshelves">virtualshelves</link> set to
11873 <section id="OpacAllowSharingPrivateLists">
11874 <title><link linkend="OpacAllowSharingPrivateLists">OpacAllowSharingPrivateLists</link></title>
11876 <para>Default: Don't allow</para>
11878 <para>Asks: ___ opac users to share private lists with other
11881 <para>Values:</para>
11889 <para>Don't allow</para>
11893 <para>Description:</para>
11897 <para>This feature will add the option for patrons to share their lists with other
11898 patrons. When this is set to 'Allow' patrons will see a share link at the top of
11899 their list. When they click that link it will ask for the email of the patron they
11900 would like to share with. Koha will then email the patron an invitation to see the
11906 <section id="OPACFineNoRenewals">
11907 <title><link linkend="OPACFineNoRenewals">OPACFineNoRenewals</link></title>
11909 <para>Default: 99999</para>
11911 <para>Asks: Only allow patrons to renew their own books on the
11912 OPAC if they have less than ___ USD in fines</para>
11915 <para>Leave this field blank to disable</para>
11919 <para>To allow renewals in the OPAC, <link linkend="opacuserlogin">opacuserlogin</link> needs to be set to
11924 <section id="OpacHiddenItems">
11925 <title><link linkend="OpacHiddenItems">OpacHiddenItems</link></title>
11927 <para>Asks: Allows to define custom rules for hiding specific
11928 items at opac. <note>
11929 <para>See docs/opac/OpacHiddenItems.txt in your Koha install
11930 directory for more information</para>
11933 <para>Description:</para>
11937 <para>In this field you can enter criteria for items you would
11938 like to hide from display in the OPAC. This field takes any
11939 combination of item fields (from the items table in the Koha
11940 database) for blocking. For example a value of:</para>
11942 <para><programlisting>itype: [07, 10]
11943 location: [STAFF, ISO]</programlisting>Will block items with an itype code of
11944 07 or 10 as well as items that have a shelving location of
11945 STAFF or ISO.</para>
11947 <para>In items my items.itype 07 is defined in Item Types
11948 Administration as Staff Assigned My items.itype 10 in Item
11949 Types is Archival Copy The locations STAFF and ISO are in
11950 Authorized Values for category=LOC STAFF means it's assigned
11951 to the staff reading room and ISO means it is in the isolation
11957 <section id="OpacRenewalAllowed">
11958 <title><link linkend="OpacRenewalAllowed">OpacRenewalAllowed</link></title>
11960 <para>Default: Don't allow</para>
11962 <para>Asks: ___ patrons to renew their own books on the
11965 <para>Values:</para>
11973 <para><link linkend="opacuserlogin">opacuserlogin</link>
11974 needs to be set to 'allow'</para>
11980 <para>Don't allow</para>
11984 <para>Staff will still be able to renew items for patrons
11985 via the staff client</para>
11991 <para>Description:</para>
11995 <para>This preference allows the administration to choose if
11996 patrons can renew their checked out materials via their
11997 checked out history in the OPAC. It allows patrons to renew
11998 their materials without having to contact the library or
11999 having to return to the library.</para>
12004 <section id="OpacRenewalBranch">
12005 <title><link linkend="OpacRenewalBranch">OpacRenewalBranch</link></title>
12007 <para>Default: the branch the item was checked out from</para>
12009 <para>Asks: Use ___ as branchcode to store in the statistics
12012 <para>Values:</para>
12020 <para>'OPACRenew'</para>
12024 <para>the item's home branch</para>
12028 <para>the patron's home branch</para>
12032 <para>the branch the item was checked out from</para>
12036 <para>Description:</para>
12040 <para>This value is used in the statistics table to help with
12041 reporting. The statistics table in Koha keeps track of all
12042 checkouts and renewals, this preference defines which branch
12043 is entered in to the table when a patron renews an item for
12044 themselves via the OPAC.</para>
12049 <section id="OPACViewOthersSuggestions">
12050 <title><link linkend="OPACViewOthersSuggestions">OPACViewOthersSuggestions</link></title>
12052 <para>Default: Don't show</para>
12054 <para>Asks: ___ purchase suggestions from other patrons on the
12057 <para>Values:</para>
12061 <para>Don't show</para>
12069 <para><link linkend="opacuserlogin">opacuserlogin</link>
12070 needs to be set to 'allow'</para>
12077 <section id="SearchMyLibraryFirst">
12078 <title><link linkend="SearchMyLibraryFirst">SearchMyLibraryFirst</link></title>
12080 <para>Default: Don't limit</para>
12082 <para>Asks: ___ patrons' searches to the library they are
12083 registered at.</para>
12085 <para>Values:</para>
12089 <para>Don't limit</para>
12093 <para>Searching the OPAC will show results from all
12098 <para>If you're a one branch system, choose 'Don't
12109 <para>Patrons will still be able to search other libraries
12110 via the Advanced search page - but will be limited to
12111 searches for their library only from the basic search
12116 <para><link linkend="opacuserlogin">opacuserlogin</link>
12117 needs to be set to 'allow'</para>
12125 <section id="opacprivacyprefs">
12126 <title><link linkend="opacprivacyprefs">Privacy</link></title>
12129 <section id="AllowPatronToSetCheckoutsVisibilityForGuarantor">
12130 <title><link linkend="AllowPatronToSetCheckoutsVisibilityForGuarantor">AllowPatronToSetCheckoutsVisibilityForGuarantor</link></title>
12131 <para>Default: Don't allow</para>
12132 <para>Asks: ___ patrons to choose their own privacy settings for showing the patron's
12133 checkouts to the patron's guarantor".</para>
12134 <para>Values:<itemizedlist>
12139 <para>Don't allow</para>
12141 </itemizedlist></para>
12142 <para>Description:<itemizedlist>
12144 <para>By default staff can see checkouts to family members via the staff client.
12145 This preference will allow guarantees (children) to grant permission to
12146 guarantors (guardians) to view their current checkouts via the public catalog.
12147 This preference requires that you allow patrons to se their own privacy with the
12148 <link linkend="OPACPrivacy">OPACPrivacy</link> preference.</para>
12150 </itemizedlist></para>
12153 <section id="AnonSuggestions">
12154 <title><link linkend="AnonSuggestions">AnonSuggestions</link></title>
12156 <para>Default: Don't allow</para>
12158 <para>Asks: ___ patrons that aren't logged in to make purchase
12159 suggestions. <important>
12160 <para>If set to 'Allow', suggestions are connected to the
12161 <link linkend="AnonymousPatron">AnonymousPatron</link></para>
12162 </important></para>
12164 <para>Values:</para>
12172 <para>Don't allow</para>
12177 <section id="AnonymousPatron">
12178 <title><link linkend="AnonymousPatron">AnonymousPatron</link></title>
12180 <para>Default: 0</para>
12182 <para>Asks: Use borrowernumber ___ as the Anonymous Patron (for anonymous suggestions
12183 and reading history) </para>
12185 <para>Before setting this preference <link linkend="addnewpatron">create a
12186 patron</link> to be used for all anonymous suggestions and/or reading history
12187 items. This patron can be any type and should be named something to make it clear to
12188 you that they're anonymous (ex. Anonymous Patron).</para>
12191 <para>Remember to use the borrowernumber note the patron's cardnumber for this value.
12192 The borrowernumber can be found on the patron record under 'Library use' on the right.<screenshot>
12193 <screeninfo>Borrowernumber</screeninfo>
12196 <imagedata fileref="images/admin/globalprefs/AnonymousPatron.png"/>
12199 </screenshot></para>
12203 <section id="EnableOpacSearchHistory">
12204 <title><link linkend="EnableOpacSearchHistory">EnableOpacSearchHistory</link></title>
12206 <para>Default: Keep</para>
12208 <para>Asks: ___ patron search history in the OPAC.</para>
12210 <para>Values:</para>
12214 <para>Don't keep</para>
12223 <section id="OPACPrivacy">
12224 <title><link linkend="OPACPrivacy">OPACPrivacy</link></title>
12226 <para>Default: Don't allow</para>
12228 <para>Asks: ___ patrons to choose their own privacy settings for
12229 their reading history. <important>
12230 <para>This requires <link linkend="opacreadinghistory">opacreadinghistory</link> set to
12231 'Allow' and <link linkend="AnonymousPatron">AnonymousPatron</link> to be set to
12232 your anonymous patron's borrowernumber.</para>
12233 </important></para>
12235 <para>Values:</para>
12243 <para>Don't allow</para>
12246 <para>Description:<itemizedlist>
12248 <para>The default privacy setting for each patron category can be set in the <link linkend="patcats">Patrons Categories</link> area. If you set this preference
12249 to 'allow' then patrons can change that for themselves via the OPAC.</para>
12251 </itemizedlist><important>
12252 <para>If patron has chosen to have their reading history anonymized and you have
12253 <link linkend="StoreLastBorrower">StoreLastBorrower</link> set to "Don't store"
12254 then as soon as the item is checked in the last borrower will be
12256 </important></para>
12259 <section id="opacreadinghistory">
12260 <title><link linkend="opacreadinghistory">opacreadinghistory</link></title>
12262 <para>Default: Allow</para>
12264 <para>Asks: ___ patrons to see what books they have checked out in
12268 <para>Enabling this will make it so that patrons can view their circulation history in
12269 the OPAC unless you have <link linkend="OPACPrivacy">OPACPrivacy</link> set to
12274 <para>This data is stored in the system regardless of your
12275 choice, unless your patrons have chosen to never have their
12276 reading history kept.</para>
12279 <section id="StoreLastBorrower">
12280 <title><link linkend="StoreLastBorrower">StoreLastBorrower</link></title>
12281 <para>Default: Don't store</para>
12282 <para>Asks: ___ the last patron to return an item. </para>
12283 <para>Values: <itemizedlist>
12285 <para>Don't store</para>
12290 </itemizedlist></para>
12291 <para>Description:<itemizedlist>
12293 <para>This preference allows you to store the last patron to borrow an item even
12294 if the patron has chosen to have their reading history anonymized. </para>
12296 </itemizedlist><note>
12297 <para>This setting is independent of <link linkend="opacreadinghistory">opacreadinghistory</link> and/or <link linkend="AnonymousPatron">AnonymousPatron</link>.</para>
12300 <section id="TrackClicks">
12301 <title><link linkend="TrackClicks">TrackClicks</link></title>
12302 <para>Default: Don't track</para>
12303 <para>Asks: ___ links that patrons click on.</para>
12304 <para>Values:<itemizedlist>
12306 <para>Don't track</para>
12312 <para>Track anonymously</para>
12314 </itemizedlist></para>
12315 <para>Description:<itemizedlist>
12317 <para>By setting this preference to one of the track options you will allow Koha
12318 to track every link clicked in Koha. This data will be stored in a database
12319 table so that you can run reports against that data. If you choose to 'Track'
12320 clicks then Koha will record both the link clicked and the logged in user who
12321 clicked the link. If you choose to 'Track anonymously' then the borrowernumber
12322 will not be recorded, but the rest of the data will.<note>
12323 <para>Remember to update your local privacy policies and link to them from the
12324 OPAC to notify your users that you are tracking their information.</para>
12327 </itemizedlist></para>
12330 <section id="opacrestrictedpg">
12331 <title><link linkend="opacrestrictedpg">Restricted Page</link></title>
12332 <para>Using the following preference you can create a page within your Koha system that is
12333 accessible by only specific IP addresses. This can be used to house links to databases
12334 that can only be accessed from with the library or other licensed content.</para>
12335 <section id="RestrictedPageContent">
12336 <title><link linkend="RestrictedPageContent">RestrictedPageContent</link></title>
12337 <para>Asks: HTML content of your restricted page.</para>
12339 <section id="RestrictedPageLocalIPs">
12340 <title><link linkend="RestrictedPageLocalIPs">RestrictedPageLocalIPs</link></title>
12341 <para>Asks: Access from IP addresses beginning with ___ do not need to be
12342 authenticated</para>
12343 <para>Description:<itemizedlist>
12345 <para>You can enter individual IPS as a comma separated list (ex:
12346 '127.0.0,127.0.1') or just the beginning of the IP range allowed (ex:
12349 </itemizedlist></para>
12351 <section id="RestrictedPageTitle">
12352 <title><link linkend="RestrictedPageTitle">RestrictedPageTitle</link></title>
12353 <para>Asks: Use ___ as title of your restricted page</para>
12354 <para>Description:<itemizedlist>
12356 <para>This title will appear in the breadcrumb and on the top of the restricted
12359 </itemizedlist></para>
12362 <section id="opacselfregistrationprefs">
12363 <title><link linkend="opacselfregistrationprefs">Self Registration</link></title>
12364 <section id="PatronSelfModificationBorrowerUnwantedField">
12365 <title><link linkend="PatronSelfModificationBorrowerUnwantedField">PatronSelfModificationBorrowerUnwantedField</link></title>
12366 <para>Default: password</para>
12367 <para>Asks: The following <ulink url="http://schema.koha-community.org/tables/borrowers.html">database
12368 columns</ulink> will not appear on the patron self-modification screen: ___</para>
12369 <para>Description:</para>
12372 <para>This preference allows you to define what fields patrons can edit if you're
12373 allowing them to update their personal information via the public catalog with the
12374 <link linkend="OPACPatronDetails">OPACPatronDetails</link> preference.</para>
12378 <para>Separate columns with |</para>
12381 <section id="PatronSelfRegistration">
12382 <title><link linkend="PatronSelfRegistration">PatronSelfRegistration</link></title>
12383 <para>Default: Don't allow</para>
12384 <para>Asks: ___ library patrons to register an account via the OPAC.</para>
12385 <para>Values:<itemizedlist>
12390 <para>Don't allow</para>
12392 </itemizedlist></para>
12393 <para>Description:</para>
12396 <para>Setting this preference to 'Allow' will provide a link on the OPAC to register
12397 for a new account. Using the other <link linkend="opacselfregistrationprefs">Self
12398 Registration</link> system preferences you can control how this preference will function.</para>
12400 <screeninfo>Register link in the OPAC</screeninfo>
12403 <imagedata fileref="images/admin/globalprefs/PatronSelfRegistration.png"/>
12410 <para>Patrons registering via the OPAC will not need to be approved by a librarian.
12411 For this reason it is recommended that you set up a provisional <link linkend="patcats">patron category</link> with no <link linkend="circfinerules">circulation rights</link>. That way patrons will have to come in to the library
12412 to verify their identity before given circulation rights at the library. Once the
12413 patron confirms their identiy the library staff can change the category to one with
12414 permissions to check items out and place holds.</para>
12417 <section id="PatronSelfRegistrationAdditionalInstructions">
12418 <title><link linkend="PatronSelfRegistrationAdditionalInstructions">PatronSelfRegistrationAdditionalInstructions</link></title>
12419 <para>Asks: Display the following additional instructions for patrons who self register
12420 via the OPAC ( HTML is allowed ): </para>
12421 <para>Description:<itemizedlist>
12423 <para>This preference takes any HTML you'd like to display on the page the patron
12424 sees after successfully registering for their library card.</para>
12426 </itemizedlist></para>
12428 <section id="PatronSelfRegistrationBorrowerMandatoryField">
12429 <title><link linkend="PatronSelfRegistrationBorrowerMandatoryField">PatronSelfRegistrationBorrowerMandatoryField</link></title>
12430 <para>Default: surname|firstname</para>
12431 <para>Asks: The following database columns must be filled in on the patron entry screen:
12433 <para>Description:</para>
12436 <para>This preference allows you to define what fields patrons must fill in on their
12437 self regisration form. If any of the required fields are blank Koha will not let
12438 the patron register.</para>
12442 <para>Separate columns with |</para>
12445 <para>For help with field names, ask your system administrator or <ulink url="http://schema.koha-community.org/tables/borrowers.html">view the database
12446 structure</ulink> associated with the borrowers table.</para>
12449 <para>If you're going to require that patrons verify their accounts via email with the
12450 <link linkend="PatronSelfRegistrationVerifyByEmail">PatronSelfRegistrationVerifyByEmail</link> preference the email field will
12451 automatically be marked as required.</para>
12454 <section id="PatronSelfRegistrationBorrowerUnwantedField">
12455 <title><link linkend="PatronSelfRegistrationBorrowerUnwantedField">PatronSelfRegistrationBorrowerUnwantedField</link></title>
12456 <para>Default: password</para>
12457 <para>Asks: The following database columns will not appear on the patron entry screen:
12459 <para>Description:</para>
12462 <para>Using this preference you can hide fields from the patron registraion and
12463 update form in the OPAC.</para>
12467 <para>Separate columns with |</para>
12470 <para>For help with field names, ask your system administrator or <ulink url="http://schema.koha-community.org/tables/borrowers.html">view the database
12471 structure</ulink> associated with the borrowers table.</para>
12474 <section id="PatronSelfRegistrationDefaultCategory">
12475 <title><link linkend="PatronSelfRegistrationDefaultCategory">PatronSelfRegistrationDefaultCategory</link></title>
12476 <para>Asks: Use the patron category code ___ as the default patron category for patrons
12477 registered via the OPAC. </para>
12478 <para>Description:</para>
12481 <para>Enter in the patron category code for the category that all new patrons
12482 registered via the OPAC will be put in to.</para>
12486 <para>Patrons registering via the OPAC will not need to be approved by a librarian.
12487 For this reason it is recommended that you set up a provisional <link linkend="patcats">patron category</link> with no <link linkend="circfinerules">circulation rights</link>. That way patrons will have to come in to the library
12488 to verify their identity before given circulation rights at the library. Once the
12489 patron confirms their identiy the library staff can change the category to one with
12490 permissions to check items out and place holds.</para>
12493 <para>If you leave this blank or enter in an invalid code your patrons will still be
12494 able to register but will not be given a username. There will be no errors on the
12495 page to explain this, so be sure to enter a valid patron category code.</para>
12498 <section id="PatronSelfRegistrationExpireTemporaryAccountsDelay">
12499 <title><link linkend="PatronSelfRegistrationExpireTemporaryAccountsDelay">PatronSelfRegistrationExpireTemporaryAccountsDelay</link></title>
12500 <para>Default: 0</para>
12501 <para>Asks: Delete patrons registered via the OPAC, but not yet verified after ___
12503 <para>Description:<itemizedlist>
12505 <para>This prefence links to the <link linkend="deleteexpiredregistrationcron">delete_expired_opac_registrations.pl cron job</link>. If that cron is set to
12506 run nightly it will clean up any registrations that have not been verified via
12507 email in the number of days entered on this preference. This is dependent on
12508 <link linkend="PatronSelfRegistrationVerifyByEmail">PatronSelfRegistrationVerifyByEmail</link> preference.</para>
12510 </itemizedlist></para>
12512 <section id="PatronSelfRegistrationVerifyByEmail">
12513 <title><link linkend="PatronSelfRegistrationVerifyByEmail">PatronSelfRegistrationVerifyByEmail</link></title>
12514 <para>Default: Don't require</para>
12515 <para>Asks: ___ that a self-registering patron verify his or herself via email.</para>
12516 <para>Values:<itemizedlist>
12518 <para>Don't require</para>
12521 <para>Require</para>
12523 </itemizedlist></para>
12524 <para>Description:<itemizedlist>
12526 <para>If you require patrons to verify their accounts via email they will not be
12527 able to log in to the OPAC until they acknowledge the email sent by Koha. If you
12528 don't require this then patrons will be able to log in as soon as they fill in
12529 the registration form. You can set the <link linkend="PatronSelfRegistrationExpireTemporaryAccountsDelay">PatronSelfRegistrationExpireTemporaryAccountsDelay</link> preference to
12530 delete the un-verified self registrations after a certain number of days.</para>
12532 </itemizedlist><note>
12533 <para>If you're going to require that patrons verify their accounts via email then
12534 the email field will automatically be marked as required.</para>
12539 <section id="shelfbrowseprefs">
12540 <title><link linkend="shelfbrowseprefs">Shelf Browser</link></title>
12544 <section id="OPACShelfBrowser">
12545 <title><link linkend="OPACShelfBrowser">OPACShelfBrowser</link></title>
12547 <para>Default: Show</para>
12549 <para>Asks: ___ a shelf browser on item details pages, allowing
12550 patrons to see what's near that item on the shelf.</para>
12552 <para>Values:</para>
12556 <para>Don't show</para>
12563 <screeninfo>OPACShelfBrowser</screeninfo>
12567 <imagedata fileref="images/admin/globalprefs/OPACShelfBrowser.png"/>
12574 <para>Description:</para>
12578 <para>This preference allows patrons to view what is located
12579 on the shelf near the item they looked up. The shelf browser
12580 option appears on the details page to the right of each items'
12581 call number. Clicking the 'Browse Shelf' link allows for a
12582 virtual shelf browsing experience via the OPAC and lets
12583 patrons see other books that may relate to their search and
12584 items that sit on the shelf near the item they are looking
12590 <para>This uses up a fairly large amount of resources on your
12591 server, and should be avoided if your collection has a large
12592 number of items.</para>
12596 <section id="ShelfBrowserUsesCcode">
12597 <title><link linkend="ShelfBrowserUsesCcode">ShelfBrowserUsesCcode</link></title>
12599 <para>Default: Don't use</para>
12601 <para>Asks: ___ the item collection code when finding items for
12602 the shelf browser.</para>
12604 <para>Values:</para>
12608 <para>Don't use</para>
12616 <para>Description:</para>
12620 <para>If your library uses collection codes then you might
12621 want the shelf browser to take into consideration what
12622 collection the books belong to when populating the virtual
12623 shelf browser.</para>
12628 <section id="ShelfBrowserUsesHomeBranch">
12629 <title><link linkend="ShelfBrowserUsesHomeBranch">ShelfBrowserUsesHomeBranch</link></title>
12631 <para>Default: Use</para>
12633 <para>Asks: ___ the item home branch when finding items for the
12634 shelf browser.</para>
12636 <para>Values:</para>
12640 <para>Don't use</para>
12648 <para>Description:</para>
12652 <para>If you have a multiple branch system you may want to
12653 make sure that Koha takes into consideration what branch owns
12654 the books when populating the virtual shelf browser for
12660 <section id="ShelfBrowserUsesLocation">
12661 <title><link linkend="ShelfBrowserUsesLocation">ShelfBrowserUsesLocation</link></title>
12663 <para>Default: Use</para>
12665 <para>Asks: ___ the item location when finding items for the shelf
12668 <para>Values:</para>
12672 <para>Don't use</para>
12680 <para>Description:</para>
12684 <para>If your library uses shelving locations then you might
12685 want the shelf browser to take into consideration what
12686 shelving location the books belong to when populating the
12687 virtual shelf browser.</para>
12694 <section id="patronprefs">
12695 <title><link linkend="patronprefs">Patrons</link></title>
12697 <para><emphasis>Get there:</emphasis> More > Administration >
12698 Global System Preferences > Patrons</para>
12700 <section id="generalpatronpref">
12701 <title><link linkend="generalpatronpref">General</link></title>
12702 <section id="AutoEmailOPACUser">
12703 <title><link linkend="AutoEmailOPACUser">AutoEmailOpacUser</link></title>
12704 <para>Default: Don't send</para>
12705 <para>Asks: ___ an email to newly created patrons with their account details.</para>
12706 <para>Description:</para>
12709 <para>AutoEmailOpacUser allows library users to be notified by email of their
12710 account details when a new account is opened at the email address specified in the
12711 <link linkend="AutoEmailPrimaryAddress">AutoEmailPrimaryAddress</link>
12712 preference. The email contains the username and password given to or chosen by the
12713 patron when signing up for their account and can be customized by editing the
12714 <link linkend="ACCTDETAILS">ACCTDETAILS</link> notice.</para>
12717 <para>Values:</para>
12720 <para>Don't send</para>
12727 <section id="AutoEmailPrimaryAddress">
12728 <title><link linkend="AutoEmailPrimaryAddress">AutoEmailPrimaryAddress</link></title>
12729 <para>Default: alternate</para>
12730 <para>Asks: Use ___ patron email address for sending out emails.</para>
12731 <para>Values:</para>
12734 <para>alternate</para>
12737 <para>first valid</para>
12746 <para>Description:</para>
12749 <para>If you choose 'first valid' as the value for AutoEmailPrimaryAddress the
12750 system will check the email fields in this order: home, work, then alternate.
12751 Otherwise the system will use the email address you specify.</para>
12755 <section id="autoMemberNum">
12756 <title><link linkend="autoMemberNum">autoMemberNum</link></title>
12757 <para>Default: Do</para>
12758 <para>Asks: ___ default the card number field on the patron addition screen to the next
12759 available card number</para>
12760 <para>Values:</para>
12766 <para>If the largest currently used card number is 26345000012941, then this
12767 field will default to 26345000012942 for the next patron</para>
12775 <para>Description:</para>
12778 <para>This preference determines if the patron's barcode is automatically
12779 calculated. This prevents the person setting up the library card account from
12780 having to assign a number to the new card. If set to 'Do' the system will
12781 calculate a new patron barcode by adding 1 to the maximum barcode already present
12782 in the database.</para>
12786 <section id="BorrowerMandatoryField">
12787 <title><link linkend="BorrowerMandatoryField">BorrowerMandatoryField</link></title>
12788 <para>Default: surname|cardnumber|barcode</para>
12789 <para>Asks: The following database columns must be filled in on the patron entry screen:
12791 <para>Description:</para>
12794 <para>This preference enables the system administrator to choose which fields your
12795 library would like required for patron accounts. Enter field names separated by |
12796 (bar). This ensures that basic information is included in each patron record. If a
12797 patron leaves one of the required fields blank an error message will issue and the
12798 account will not be created.</para>
12802 <para>Separate columns with |</para>
12805 <para>For help with field names, ask your system administrator or <ulink url="http://schema.koha-community.org/tables/borrowers.html">view the database
12806 structure</ulink> associated with the borrowers table.</para>
12809 <section id="borrowerRelationship">
12810 <title><link linkend="borrowerRelationship">borrowerRelationship</link></title>
12811 <para>Default: father|mother</para>
12812 <para>Asks: Guarantors can be the following of those they guarantee ___</para>
12813 <para>Description:</para>
12816 <para>This preference enables the system administrator to define valid relationships
12817 between a guarantor (usually a parent) & a guarantee (usually a child).
12818 Defining values for this field does not make the guarantor field required when
12819 adding a guarantee type patron. This preference creates a drop down list
12820 identifying the relationship of the guarantor to the guarantee. To disable the
12821 ability to add children types in Koha you can leave this field blank.</para>
12825 <para>Input multiple choices separated by |</para>
12828 <section id="BorrowerRenewalPeriodBase">
12829 <title><link linkend="BorrowerRenewalPeriodBase">BorrowerRenewalPeriodBase</link></title>
12830 <para>Default: current date</para>
12831 <para>Asks: When renewing borrowers, base the new expiry date on ___</para>
12832 <para>Values:</para>
12835 <para>current date.</para>
12838 <para>current membership expiry date.</para>
12841 <para>Description:</para>
12844 <para>This preference controls what the patron's new expiration date will be when
12845 you renew their card. Using the 'current date' will add the subscription period to
12846 today's date when calculating the new expiration date. Using 'current membership
12847 expiry date' will add the subscription period to the old expiration date for the
12848 patron when renewing their account.</para>
12852 <section id="BorrowersTitles">
12853 <title><link linkend="BorrowersTitles">BorrowersTitles</link></title>
12854 <para>Default: Mr|Mrs|Miss|Ms</para>
12855 <para>Asks: Borrowers can have the following titles ___</para>
12856 <para>Description:</para>
12859 <para>This preference allows the staff to choose the titles that can be assigned to
12860 patrons. The choices present as a drop down list when creating a patron
12865 <para>Input multiple choices separated by |</para>
12868 <section id="BorrowerUnwantedField">
12869 <title><link linkend="BorrowerUnwantedField">BorrowerUnwantedField</link></title>
12870 <para>Asks: The following database columns will not appear on the patron entry screen:
12872 <para>Description:</para>
12875 <para>This preference enables the system administrator to choose which fields your
12876 library doesn't need to see on the patron entry form. Enter field names separated
12881 <para>Separate columns with |</para>
12884 <para>For help with field names, ask your system administrator or <ulink url="http://schema.koha-community.org/tables/borrowers.html">view the database
12885 structure</ulink> associated with the borrowers table.</para>
12888 <section id="CardnumberLength">
12889 <title><link linkend="CardnumberLength">CardnumberLength</link></title>
12890 <para>Asks: Card numbers for patrons must be ___ characters long. </para>
12891 <para>Description:<itemizedlist>
12893 <para>The length can be a single number to specify an exact length, a range
12894 separated by a comma (i.e., 'Min,Max'), or a maximum with no minimum (i.e.,
12895 ',Max'). If 'cardnumber' is included in the <link linkend="BorrowerMandatoryField">BorrowerMandatoryField</link> list, the
12896 minimum length, if not specified here, defaults to one. </para>
12898 </itemizedlist></para>
12900 <section id="checkdigit">
12901 <title><link linkend="checkdigit">checkdigit</link></title>
12902 <para>Default: Don't</para>
12903 <para>Asks: ___ check and construct borrower card numbers in the Katipo style.</para>
12904 <para>Values:</para>
12914 <para>This overrides <link linkend="autoMemberNum">autoMemberNum</link> if on.</para>
12917 <section id="EnableBorrowerFiles">
12918 <title><link linkend="EnableBorrowerFiles">EnableBorrowerFiles</link></title>
12919 <para>Default: Don't</para>
12920 <para>Asks: ___ enable the ability to upload and attach arbitrary files to a borrower
12922 <para>Values:</para>
12931 <para>Description:</para>
12934 <para>When enabled this will add a 'Files' tab to the left of the patron detail page
12935 where you can view and upload files to the patron record.</para>
12939 <section id="EnhancedMessagingPreferences">
12940 <title><link linkend="EnhancedMessagingPreferences">EnhancedMessagingPreferences</link></title>
12941 <para>Default: Allow</para>
12942 <para>Asks: ___ staff to manage which notices patrons will receive and when they will
12943 receive them. </para>
12944 <para>Values:</para>
12950 <para>Don't allow</para>
12954 <para>This only applies to certain kinds of notices, overdue notices will be sent
12955 based on the library's rules, not the patron's choice.</para>
12958 <para>To manage if patrons have also access to these settings, use <link linkend="EnhancedMessagingPreferencesOPAC">EnhancedMessagingPreferencesOPAC</link>. </para>
12960 <para>Description:</para>
12963 <para>These messages are in addition to the overdue notices that the library sends.
12964 The difference between these notices and overdues is that the patron can opt-in
12965 and out of these. Setting this preference to 'Allow' will allow staff to choose
12966 for patrons to receive any one of the following messages:</para>
12969 <para>Item Checkout : A notice that lists all the of the items the patron has
12970 just checked out and/or renewed, this is an electronic form of the checkout
12974 <para>Item Due : A notice on the day and item is due back at the library</para>
12977 <para>Hold Filled : A notice when you have confirmed the hold is waiting for the
12981 <para>Item Checkin : A notice that lists all the of the items the patron has
12982 just checked in</para>
12985 <para>Advanced Notice : A notice in advance of the patron's items being due
12986 (Staff can choose the number of days in advance)</para>
12992 <section id="EnhancedMessagingPreferencesOPAC">
12993 <title><link linkend="EnhancedMessagingPreferencesOPAC">EnhancedMessagingPreferencesOPAC</link></title>
12994 <para>Default: Show</para>
12995 <para>Asks: ___ patron messaging setting on the OPAC</para>
12996 <para>Values:<itemizedlist>
12998 <para>Don't show</para>
13003 </itemizedlist><important>
13004 <para><link linkend="EnhancedMessagingPreferences">EnhancedMessagingPreferences</link> must be enabled for messaging options to
13005 show in the OPAC</para>
13006 </important></para>
13007 <para>Description:</para>
13010 <para>These messages are in addition to the overdue notices that the library sends.
13011 The difference between these notices and overdues is that the patron can opt-in
13012 and out of these. Setting this preference to 'Allow' will allow patrons to choose
13013 to receive any one of the following messages:</para>
13016 <para>Item Checkout : A notice that lists all the of the items the patron has
13017 just checked out and/or renewed, this is an electronic form of the checkout
13021 <para>Item Due : A notice on the day and item is due back at the library</para>
13024 <para>Hold Filled : A notice when you have confirmed the hold is waiting for the
13028 <para>Item Checkin : A notice that lists all the of the items the patron has
13029 just checked in</para>
13032 <para>Advanced Notice : A notice in advance of the patron's items being due (The
13033 patron can choose the number of days in advance)</para>
13039 <section id="ExtendedPatronAttributes">
13040 <title><link linkend="ExtendedPatronAttributes">ExtendedPatronAttributes</link></title>
13041 <para>Default: Enable</para>
13042 <para>Asks: ___ searching, editing and display of custom attributes on patrons.</para>
13043 <para>Values:</para>
13046 <para>Don't enable</para>
13049 <para>Enable</para>
13052 <para>Define attributes in Koha administration</para>
13055 <para>Get there: More > Administration > <link linkend="patronattributetypes">Patron Attribute Types</link></para>
13060 <para>Description:</para>
13063 <para>Patron attributes are library-defined custom fields that can be applied to
13064 patron records.</para>
13068 <para>Use custom attributes for fields that the default patron record does not support
13069 such as driver's license number or student ID number.</para>
13072 <section id="FeeOnChangePatronCategory">
13073 <title><link linkend="FeeOnChangePatronCategory">FeeOnChangePatronCategory</link></title>
13074 <para>Default: Do</para>
13075 <para>Asks: ___ charge a fee when a patron changes to a category with an enrollment
13077 <para>Values:<itemizedlist>
13084 </itemizedlist></para>
13086 <section id="intranetreadinghistory">
13087 <title><link linkend="intranetreadinghistory">intranetreadinghistory</link></title>
13088 <para>Default: Allow</para>
13089 <para>Asks: ___ staff to access a patron's checkout history. <important>
13090 <para>If you have the <link linkend="OPACPrivacy">OPACPrivacy</link> preference set
13091 to 'Allow' and the patron has decided to not have their history kept staff will
13092 only see currently checked out items.</para>
13093 </important></para>
13094 <para>Values:</para>
13100 <para>Don't allow</para>
13104 <para>Reading history is still stored, regardless of staff being allowed access or not
13105 unless the patron has chosen to have their history anonymized via their <link linkend="opacmyprivacy">privacy page</link>.</para>
13108 <section id="MaxFine">
13109 <title><link linkend="MaxFine">MaxFine</link></title>
13110 <para>Default: 9999</para>
13111 <para>Asks: The late fine for all checkouts will only go up to ___ USD.</para>
13112 <para>Description:</para>
13115 <para>This preference controls the default cap on fines accrued by the patron.
13116 Leaving this preference blank means that there is no cap on the amount of fines a
13117 patron can accrue. If you'd like, single item caps can be specified in the <link linkend="circfinerules">circulation rules matrix</link>.</para>
13121 <section id="MembershipExpiryDaysNotice">
13122 <title><link linkend="MembershipExpiryDaysNotice">MembershipExpiryDaysNotice</link></title>
13123 <para>Asks: Send an account expiration notice when a patron's card will expire in ___
13125 <para>Description:<itemizedlist>
13127 <para>If you would like to notify patrons that their accounts are about to expire
13128 then you can enter a number of days before expiration in this preference. The
13129 notice text can be customized in the <link linkend="notices">Notices &
13130 Slips</link> tool.</para>
13132 </itemizedlist><important>
13133 <para>You will need to enable the <link linkend="patronexpirycron">membership expiry
13134 cron job</link> for this notice to send.</para>
13135 </important></para>
13137 <section id="minPasswordLength">
13138 <title><link linkend="minPasswordLength">minPasswordLength</link></title>
13139 <para>Default: 3</para>
13140 <para>Asks: Login passwords for staff and patrons must be at least ___ characters
13143 <para>This applies to both the staff login and the patron OPAC login.</para>
13146 <section id="NotifyBorrowerDeparture">
13147 <title><link linkend="NotifyBorrowerDeparture">NotifyBorrowerDeparture</link></title>
13148 <para>Default: 30</para>
13149 <para>Asks: Show a notice that a patron is about to expire ___ days beforehand.</para>
13150 <para>Description:</para>
13153 <para>When the patron attempts to check out materials, a warning will appear in the
13154 check out window of the Staff Client telling the librarian that the patrons
13155 account is about to expire.</para>
13159 <para>This notice will appear on the patron's record in the staff client.</para>
13162 <section id="patronimages">
13163 <title><link linkend="patronimages">patronimages</link></title>
13164 <para>Default: Allow</para>
13165 <para>Asks: ___ images to be uploaded and shown for patrons on the staff client.</para>
13166 <para>Values:</para>
13172 <para>Don't allow</para>
13175 <para>Description:<itemizedlist>
13177 <para>If this preference is set to 'Allow' the staff will be able to upload images
13178 of patrons either <link linkend="addpatronimages">one by one</link> or <link linkend="uploadpatronimages">in bulk</link>. Patrons images will show on the
13179 detail page to the left of the patron information. They can also show in the
13180 OPAC if you set the <link linkend="OPACpatronimage">OPACpatronimage</link>
13181 preference or in the self check out module if you set the <link linkend="ShowPatronImageInWebBasedSelfCheck">ShowPatronImageInWebBasedSelfCheck</link> preference.</para>
13183 </itemizedlist></para>
13185 <section id="PatronsPerPage">
13186 <title><link linkend="PatronsPerPage">PatronsPerPage</link></title>
13187 <para>Default: 20</para>
13188 <para>Asks: By default, show ___ results per page in the staff client.</para>
13189 <para>Description:<itemizedlist>
13191 <para>This preference will let you define how many patrons to show on patron
13192 search results pages.</para>
13194 </itemizedlist></para>
13196 <section id="SMSSendDriver">
13197 <title><link linkend="SMSSendDriver"> SMSSendDriver, SMSSendUsername, and SMSSendPassword </link></title>
13198 <para>Asks: Use the SMS::Send:: ___ driver to send SMS messages. Define a username/login
13199 ___ and a password ___.</para>
13201 <para> Please refer to your national laws concerning the sending of bulk SMS
13202 messages before enabling this feature.</para>
13203 </important>Descritpion:<itemizedlist>
13205 <para>There are two options for using SMS in Koha. You can use the Email protocol
13206 for free by entering 'Email' as the SMSSendDriver or you can pay for a SMS
13207 driver. Some examples of values for the driver are:</para>
13210 <para>SMS::Send::Us::Ipipi</para>
13213 <para>SMS::Send::US::TMobile</para>
13216 <para>SMS::Send::US::Verizon</para>
13219 <para>SMS::Send::IN::Unicel</para>
13222 <para>Additional values can be found here: <ulink url="http://search.cpan.org/search?query=sms%3A%3Asend&mode=all">http://search.cpan.org/search?query=sms%3A%3Asend&mode=all
13225 <para>Only drivers available as Perl modules will work in this preference, so
13226 make sure a Perl module is available before choosing an SMS service.</para>
13228 <para>Once a driver is entered in the preference an option will appear in the
13229 staff client and the OPAC on the patron messaging form to choose to receive
13230 messages as SMS</para>
13232 <screeninfo>SMSSendDriver Options</screeninfo>
13235 <imagedata fileref="images/admin/globalprefs/SMSSendDriver.png"/>
13240 </itemizedlist></para>
13242 <para>You must allow <link linkend="EnhancedMessagingPreferences">EnhancedMessagingPreferences</link> for this to work.</para>
13245 <section id="StatisticsFields">
13246 <title><link linkend="StatisticsFields">StatisticsFields</link></title>
13247 <para>Default: location|itype|ccode</para>
13248 <para>Asks: Show the following fields from the items database table as columns on the
13249 statistics tab on the patron record: ___</para>
13251 <screeninfo>Statistics on Patron Record</screeninfo>
13254 <imagedata fileref="images/admin/globalprefs/StatisticsFields.png"/>
13259 <para>Enter the values separated by bars (|)</para>
13261 <para>Description:</para>
13264 <para>This preference lets you set which fields will show on the patron record on
13265 the Statistics tab.</para>
13269 <section id="TalkingTechItivaPhoneNotification">
13270 <title><link linkend="TalkingTechItivaPhoneNotification">TalkingTechItivaPhoneNotification</link></title>
13271 <para>Default: Disable</para>
13272 <para>Asks: ___ patron phone notifications using Talking Tech i-tiva (overdues, predues
13273 and holds notices currently supported).</para>
13274 <para>Values:</para>
13277 <para>Disable</para>
13280 <para>Enable</para>
13283 <para>Description:</para>
13286 <para>To learn more about setting up this third party product view the <link linkend="talkingtechappendix">Talking Tech Appendix</link>.</para>
13290 <para>Requires that you have <link linkend="EnhancedMessagingPreferences">EnhancedMessagingPreferences</link> set to Allow to use.</para>
13293 <section id="uppercasesurnames">
13294 <title><link linkend="uppercasesurnames">uppercasesurnames</link></title>
13295 <para>Default: Don't</para>
13296 <para>Asks: ___ store and display surnames (last names) in upper case.</para>
13297 <para>Values:</para>
13307 <section id="useDischarge">
13308 <title><link linkend="useDischarge">useDischarge</link></title>
13309 <para>Default: Don't allow</para>
13310 <para>Asks: ___ librarians to discharge borrowers and borrowers to request a
13312 <para>Values:<itemizedlist>
13317 <para>Don't allow</para>
13319 </itemizedlist></para>
13320 <para>Description:<itemizedlist>
13322 <para>A discharge is a certificate that says the patron has no current checkouts,
13323 no holds and owe no money.<note>
13324 <para>In France a "quitus" ("discharge") is needed if you want to register for
13325 an account in a library or a university). </para>
13327 <para>Academic libraries often require that you have a clear record at the
13328 library before you can graduate.</para>
13331 </itemizedlist></para>
13334 <section id="norwegianpref">
13335 <title><link linkend="norwegianpref">Norwegian patron database</link></title>
13336 <section id="NorwegianPatronDBEnable">
13337 <title><link linkend="NorwegianPatronDBEnable">NorwegianPatronDBEnable & NorwegianPatronDBEndpoint</link></title>
13338 <para>NorwegianPatronDBEnable Default: Disable</para>
13339 <para>Asks: ___ the ability to communicate with the Norwegian national patron database
13340 via the ___ endpoint. </para>
13341 <para>Values:<itemizedlist>
13343 <para>Disable</para>
13346 <para>Enable</para>
13348 </itemizedlist></para>
13350 <section id="NorwegianPatronDBSearchNLAfterLocalHit">
13351 <title><link linkend="NorwegianPatronDBSearchNLAfterLocalHit">NorwegianPatronDBSearchNLAfterLocalHit</link></title>
13352 <para>Default: Don't</para>
13353 <para>Asks: ___ search the Norwegian national patron database after a local search
13354 result was found.</para>
13355 <para>Values:</para>
13365 <section id="NorwegianPatronDBUsername">
13366 <title><link linkend="NorwegianPatronDBUsername">NorwegianPatronDBUsername & NorwegianPatronDBPassword</link></title>
13367 <para>Asks: Communicate with the Norwegian national patron database using the username
13368 ___ and the password ___. </para>
13369 <para>Description:<itemizedlist>
13371 <para>You can get these from "Base Bibliotek", which is maintained by the
13372 Norwegian National Library. </para>
13374 </itemizedlist></para>
13379 <section id="searchingprefs">
13380 <title><link linkend="searchingprefs">Searching</link></title>
13382 <para><emphasis>Get there:</emphasis> More > Administration >
13383 Global System Preferences > Searching</para>
13385 <section id="searchfeatureprefs">
13386 <title><link linkend="searchfeatureprefs">Features</link></title>
13389 <section id="EnableSearchHistory">
13390 <title><link linkend="EnableSearchHistory">EnableSearchHistory</link></title>
13391 <para>Default: Don't keep</para>
13392 <para>Asks: ___ patron search history in the staff client.</para>
13393 <para>Values:<itemizedlist>
13395 <para>Don't keep</para>
13398 <para>Keep<screenshot>
13399 <screeninfo>EnableSearchHistory</screeninfo>
13402 <imagedata fileref="images/admin/globalprefs/EnableSearchHistory.png"/>
13405 </screenshot></para>
13407 </itemizedlist>Description:<itemizedlist>
13409 <para>This preference controls whether the staff client keeps search history for
13410 logged in users. Search history will be accessible under the link to your
13411 account in the top right of the staff client.</para>
13413 </itemizedlist></para>
13415 <section id="IncludeSeeFromInSearches">
13416 <title><link linkend="IncludeSeeFromInSearches">IncludeSeeFromInSearches</link></title>
13417 <para>Default: Don't include</para>
13418 <para>Asks: ___ <emphasis role="italic">see from</emphasis> (non-preferred form)
13419 headings in bibliographic searches. </para>
13420 <para>Values:<itemizedlist>
13422 <para>Don't include</para>
13425 <para>Include</para>
13427 </itemizedlist></para>
13428 <para>Description: <itemizedlist>
13430 <para>When this preference is set to include the search engine indexer will insert
13431 <emphasis role="italic">see from</emphasis> headings from authority records
13432 into bibliographic records when indexing, so that a search on an obsolete term
13433 will turn up relevant records. For example when you search for cookery (the old
13434 term) you get titles with the heading of cooking (the new term).</para>
13436 </itemizedlist><important>
13437 <para>You will need to reindex your bibliographic database when changing this
13438 preference. </para>
13439 </important></para>
13442 <section id="OpacGroupResults">
13443 <title><link linkend="OpacGroupResults">OpacGroupResults</link></title>
13445 <para>Default: Don't use</para>
13447 <para>Asks: ___ PazPar2 to group similar results on the
13450 <para>Values:</para>
13454 <para>Don't use</para>
13463 <para>This requires that <ulink url="http://www.indexdata.com/pazpar2">PazPar2</ulink> is set up
13464 and running.</para>
13468 <section id="QueryAutoTruncate">
13469 <title><link linkend="QueryAutoTruncate">QueryAutoTruncate</link></title>
13471 <para>Default: automatically</para>
13473 <para>Asks: Perform wildcard searching (where, for example, Har
13474 would match Harry and harp) ___ (The * character would be used
13475 like so: Har* or *logging.)</para>
13477 <para>Values:</para>
13481 <para>automatically</para>
13485 <para>only if * is added</para>
13489 <para>Description:</para>
13493 <para>This setting allows for searches to be automatically
13494 truncated or for additional characters to be added to the end
13495 of a search string. When set to "automatically" the search
13496 string automatically ends with a wildcard function. For
13497 example, a search for the word "invent" with auto truncation
13498 enabled will also retrieve results for inventor, invention,
13499 inventory, etc. If you don't want this to happen automatically
13500 you can still be perform wildcard searches manually by adding
13501 an asterisk (*). Typing "invent*" even with auto truncation
13502 disabled will retrieve the same inventor, invention, inventory
13503 results. Auto truncation bypasses the necessity to type long
13504 search strings in their entirety.</para>
13509 <section id="QueryFuzzy">
13510 <title><link linkend="QueryFuzzy">QueryFuzzy</link></title>
13512 <para>Default: Try</para>
13514 <para>Asks: ___ to match similarly spelled words in a search (for
13515 example, a search for flang would also match flange and
13518 <para>Values:</para>
13522 <para>Don't try</para>
13530 <para>Description:</para>
13534 <para>This preference enables "fuzzy" searching, in which the
13535 search engine returns results that are similar to, but not
13536 exactly matching, the word or words entered by the user. This
13537 preference enables the search function to compensate for
13538 slightly misspelled names or phrases.</para>
13543 <para>Requires that <link linkend="UseICU">UseICU</link> set to 'Not using'</para>
13547 <section id="QueryStemming">
13548 <title><link linkend="QueryStemming">QueryStemming</link></title>
13550 <para>Default: Try</para>
13552 <para>Asks: ___ to match words of the same base in a search</para>
13554 <para>Values:</para>
13558 <para>Don't try</para>
13566 <para>A search for enabling would also match enable and
13573 <para>Description:</para>
13577 <para>This preference enables word stemming. Stemming allows
13578 the search function to return multiple versions of the same
13579 word, as well as related terms (i.e., both fish and fishing
13580 would be returned).</para>
13585 <section id="QueryWeightFields">
13586 <title><link linkend="QueryWeightFields">QueryWeightFields</link></title>
13588 <para>Default: Enable</para>
13590 <para>Asks: ___ ranking of search results by relevance</para>
13592 <para>Values:</para>
13596 <para>Disable</para>
13600 <para>Enable</para>
13605 <section id="TraceCompleteSubfields">
13606 <title><link linkend="TraceCompleteSubfields">TraceCompleteSubfields</link></title>
13608 <para>Default: Force</para>
13610 <para>Asks: ___ subject tracings in the OPAC and Staff Client to
13611 search only for complete-subfield matches.</para>
13613 <para>Values:</para>
13617 <para>Don't force</para>
13621 <para>Searches for subject keywords (example:
13622 opac-search.pl?q=su:World%20Wide%20Web)</para>
13632 <para>Searches for complete subject fields (example:
13633 opac-search.pl?q=su,complete-subfield:World%20Wide%20Web)</para>
13639 <para>Description:</para>
13643 <para>When TraceCompleteSubfields is set to "force," clicking
13644 on links in non-authority controlled subject tracings will
13645 only find other records where the entire subfields match.
13646 Leaving it at "don't force" does a keyword search of the
13647 subject indexes.</para>
13652 <para>This preference assumes that you're using XSLT stylesheets
13653 as set in the <link linkend="OPACXSLTDetailsDisplay">OPACXSLTDetailsDisplay</link>
13658 <section id="TraceSubjectSubdivisions">
13659 <title><link linkend="TraceSubjectSubdivisions">TraceSubjectSubdivisions</link></title>
13661 <para>Default: Include</para>
13663 <para>Asks: ___ subdivisions for searches generated by clicking on
13664 subject tracings.</para>
13666 <para>Values:</para>
13670 <para>Don't include</para>
13674 <para>Searches for subject keywords (example:
13675 opac-search.pl?q=su,complete-subfield:%22Web%20sites%22)</para>
13681 <para>Include</para>
13685 <para>Searches for complete subject fields (example:
13686 opac-search.pl?q=(su,complete-subfield:%22Web%20sites%22)%20and%20(su,complete-subfield:%22Design.%22))</para>
13692 <para>Description:</para>
13696 <para>When TraceSubjectSubdivisions is set to "Include," if
13697 you click on a subject with subdivisions (subfields other than
13698 'a') they will be searched along with the subject heading
13699 (subfield 'a'). To have only the subject heading (subfield
13700 'a') searched, set this preference to "Don't include."</para>
13705 <para>This preference assumes that you're using XSLT stylesheets
13706 as set in the <link linkend="OPACXSLTDetailsDisplay">OPACXSLTDetailsDisplay</link>
13711 <section id="UseICU">
13712 <title><link linkend="UseICU">UseICU</link></title>
13714 <para>Default: Not using</para>
13716 <para>Asks: ___ ICU Zebra indexing.</para>
13718 <para>Values:</para>
13722 <para>Not using</para>
13730 <para>Description:</para>
13734 <para>ICU is a set of code libraries providing Unicode and
13735 Globalization support for software applications. What this
13736 means is ICU Zebra indexing is only necessary if you use
13737 non-roman characters in your cataloging. If using ICU Zebra
13738 indexing you will want to not use <link linkend="QueryFuzzy">QueryFuzzy</link>.</para>
13743 <para>This setting will not affect Zebra indexing, it should
13744 only be used to tell Koha that you have activated ICU indexing
13745 if you have actually done so, since there is no way for Koha to
13746 figure this out on its own.</para>
13750 <para>Talk to your system administrator when changing this
13751 preference to make sure that your system is set up properly for
13752 this to work.</para>
13755 <section id="UseQueryParser">
13756 <title><link linkend="UseQueryParser">UseQueryParser</link></title>
13757 <para>Default: Do not try</para>
13758 <para>Asks: ___ to use the QueryParser module for parsing queries. <note>
13759 <para>Enabling this will have no impact if you do not have QueryParser installed,
13760 and everything will continue to work as usual.</para>
13762 <para>Values:<itemizedlist>
13764 <para>Do not try</para>
13769 </itemizedlist></para>
13770 <para>Description:<itemizedlist>
13772 <para>This preference enables an experimental new query parser which opens the
13773 door for a more expressive and more-effective search syntax.</para>
13775 </itemizedlist></para>
13779 <section id="searchresultsprefs">
13780 <title><link linkend="searchresultsprefs">Results Display</link></title>
13784 <section id="defaultSortField">
13785 <title><link linkend="defaultSortField">defaultSortField & defaultSortOrder</link></title>
13787 <para>defaultSortField Default: author</para>
13789 <para>defaultSortOrder Default: ascending</para>
13791 <para>Asks: By default, sort search results in the staff client by
13794 <para>Description:</para>
13798 <para>These preferences set the default sort field and sort
13799 order for searches on the staff side. Regardless of your
13800 choice, the other sort options are still available in the drop
13801 down list on the advanced search page.</para>
13805 <para>defaultSortField Values:</para>
13809 <para>author</para>
13813 <para>call number</para>
13817 <para>date added</para>
13821 <para>date of publication</para>
13825 <para>relevance</para>
13833 <para>total number of checkouts</para>
13837 <para>defaultSortOrder Values:</para>
13841 <para>ascending</para>
13845 <para>descending</para>
13849 <para>from A to Z</para>
13853 <para>from Z to A</para>
13858 <section id="displayFacetCount">
13859 <title><link linkend="displayFacetCount">displayFacetCount</link></title>
13861 <para>Default: Don't show</para>
13863 <para>Asks: ___ facet counts.</para>
13865 <para>Description:</para>
13869 <para>This preference lets you decide if you show how many
13870 times a facet is used in your search results in the OPAC and
13871 the staff client. The relevance of these numbers highly
13872 depends on the value of the <link linkend="maxRecordsForFacets">maxRecordsForFacets</link>
13873 preference. Showing these numbers can potentially effect the
13874 performance of your searching, so test your system with
13875 different values for this preference to see what works
13880 <para>Values:</para>
13884 <para>Don't show</para>
13891 <screeninfo>Number of times each Facet is found in
13892 results</screeninfo>
13896 <imagedata fileref="images/admin/globalprefs/displayFacetCount.png"/>
13903 <section id="DisplayLibraryFacets">
13904 <title><link linkend="DisplayLibraryFacets">DisplayLibraryFacets</link></title>
13905 <para>Default: holding library</para>
13906 <para>Asks: Show facets for ___</para>
13907 <para>Values:<itemizedlist>
13909 <para>both home and holding library</para>
13912 <para>holding library</para>
13915 <para>home library</para>
13917 </itemizedlist></para>
13918 <para>Description:<itemizedlist>
13920 <para>This preferenc controls the libraries facet that displays on search results
13921 in the staff and opac. The value selected here will determin which library(s)
13922 show in the facets when a search is run.</para>
13924 </itemizedlist></para>
13927 <section id="FacetLabelTruncationLength">
13928 <title><link linkend="FacetLabelTruncationLength">FacetLabelTruncationLength</link></title>
13930 <para>Default: 20</para>
13932 <para>Asks: Truncate facets length to ___ characters, in
13933 OPAC/staff interface.</para>
13935 <para>Description:</para>
13939 <para>In the OPAC and the staff client your facets are cut off
13940 at 20 characters by default. Depending on your layout this may
13941 be too many or two few letters, this preference lets you
13942 decide what number is best for your library's design.</para>
13946 <section id="FacetMaxCount">
13947 <title><link linkend="FacetMaxCount">FacetMaxCount</link></title>
13948 <para>Default: 20</para>
13949 <para>Asks: Show up ___ to facets for each category.</para>
13950 <para>Description:<itemizedlist>
13952 <para>This preference allows you to control how many possible limits show under
13953 each heading (Author, Series, Topics, etc) on the facets in the OPAC.</para>
13955 </itemizedlist></para>
13958 <section id="maxItemsInSearchResults">
13959 <title><link linkend="maxItemsInSearchResults">maxItemsInSearchResults</link></title>
13961 <para>Default: 20</para>
13963 <para>Asks: Show up to ___ items per biblio in the search
13966 <para>Description:</para>
13970 <para>This preference will let you set how many results
13971 display by default when a search is run on the Staff
13977 <section id="maxRecordsForFacets">
13978 <title><link linkend="maxRecordsForFacets">maxRecordsForFacets</link></title>
13980 <para>Default: 20</para>
13982 <para>Asks: Build facets based on ___ records from the search
13985 <para>Description:</para>
13989 <para>By default Koha only bases facets on the first page of
13990 results (usually 20 results). This preference lets you tell
13991 Koha to based the facet descriptions and numbers on any number
13992 of search results returned. The higher this number the longer
13993 it will take for your search results to return, so test with
13994 various different values to find the best balance for your
13999 <section id="MaxSearchResultsItemsPerRecordStatusCheck">
14000 <title><link linkend="MaxSearchResultsItemsPerRecordStatusCheck"
14001 >MaxSearchResultsItemsPerRecordStatusCheck</link></title>
14002 <para>Default: 20</para>
14003 <para>Asks: For records with many items, only check the availability status for the
14004 first ___ items. </para>
14005 <para>Description:<itemizedlist>
14007 <para>Availability statuses may show incorrectly in search results if a record has
14008 more items than the limit set. Statuses will display correctly in the record
14009 details. Leave empty for no limit.</para>
14011 </itemizedlist></para>
14014 <section id="numSearchResults">
14015 <title><link linkend="numSearchResults">numSearchResults</link></title>
14017 <para>Default: 20</para>
14019 <para>Asks: By default, show ___ results per page in the staff
14023 <section id="opacdefaultsort">
14024 <title><link linkend="opacdefaultsort">OPACdefaultSortField & OPACdefaultSortOrder</link></title>
14026 <para>OPACdefaultSortField Default: relevance</para>
14028 <para>OPACdefaultSortOrder Default: ascending</para>
14030 <para>Asks: By default, sort search results in the OPAC by ___,
14033 <para>Description:</para>
14037 <para>These preferences set the default sort field and sort
14038 order for searches on the OPAC. Regardless of your choice, the
14039 other sort options are still available in the drop down list
14040 on the advanced search page.</para>
14044 <para>OPACdefaultSortField Values:</para>
14048 <para>author</para>
14052 <para>call number</para>
14056 <para>date added</para>
14060 <para>date of publication</para>
14064 <para>relevance</para>
14072 <para>total number of checkouts</para>
14076 <para>OPACdefaultSortOrder Values:</para>
14080 <para>ascending</para>
14084 <para>descending</para>
14088 <para>from A to Z</para>
14092 <para>from Z to A</para>
14097 <section id="OPACItemsResultsDisplay">
14098 <title><link linkend="OPACItemsResultsDisplay">OPACItemsResultsDisplay</link></title>
14100 <para>Default: Don't show</para>
14102 <para>Asks: ___ an item's branch, location and call number in OPAC
14103 search results.</para>
14105 <para>Values:</para>
14109 <para>Don't show</para>
14117 <para>Description:</para>
14121 <para>This setting selects the information about an item that
14122 will display in the search results page of the OPAC. The
14123 results can display the status of an item and/or full details
14124 including branch, location, and call number. While the 'Show'
14125 option allows for more information to be displayed on the
14126 search results page, the information can be overwhelming for
14127 large collections with multiple branches.</para>
14132 <section id="OPACnumSearchResults">
14133 <title><link linkend="OPACnumSearchResults">OPACnumSearchResults</link></title>
14135 <para>Default: 20</para>
14137 <para>Asks: By default, show ___ results per page in the
14140 <section id="SearchWithISBNVariations">
14141 <title><link linkend="SearchWithISBNVariations">SearchWithISBNVariations</link></title>
14142 <para>Default: don't search</para>
14143 <para>Asks: When searching on the ISBN index, ___ on all variations of the ISBN.</para>
14144 <para>Values:<itemizedlist>
14146 <para>don't search</para>
14149 <para>search</para>
14151 </itemizedlist> Descriptions:<itemizedlist>
14153 <para>With this preference set to search you'll be able to search for ISBNs even
14154 if there are dashes or spaces in the field. So if you search for 9781843345855
14155 but the ISBN was cataloged as 978-1843345855 you'll still be able to find it if
14156 this preference is set to 'search'.</para>
14158 </itemizedlist><important>
14159 <para>This preference has no effect if <link linkend="UseQueryParser">UseQueryParser</link> is on</para>
14160 </important></para>
14164 <section id="searchformprefs">
14165 <title><link linkend="searchformprefs">Search Form</link></title>
14166 <section id="AdvancedSearchLanguages">
14167 <title><link linkend="AdvancedSearchLanguages">AdvancedSearchLanguages</link></title>
14168 <para>Asks: Limit the languages listed in the advanced search drop-down to the ___ ISO
14169 639-2 language codes (separate values with | or ,).</para>
14170 <para>Description:<itemizedlist>
14172 <para>This preference will allow you to decide what languages show in the pull
14173 down menu on the advanced search page in the OPAC and the staff client. If this
14174 preference is left blank, all languages will show. To limit the languages that
14175 are shown enter their <ulink url="http://www.loc.gov/standards/iso639-2/php/code_list.php">ISO 639-2
14176 language codes</ulink> separated by comma ( , ) or bar ( | ). For example to
14177 limit listing to French and Italian, enter ita|fre. </para>
14179 </itemizedlist></para>
14182 <section id="AdvancedSearchTypes">
14183 <title><link linkend="AdvancedSearchTypes">AdvancedSearchTypes</link></title>
14185 <para>Default: itemtype</para>
14187 <para>Asks: Show tabs in OPAC and staff-side advanced search for
14188 limiting searches on the ___ fields (separate values with
14191 <para>Description:</para>
14195 <para>On the advanced search page you can choose to allow
14196 filters on one or all of the following: Item types
14197 (itemtypes), Collection Codes (ccode) and Shelving Location
14198 (loc). If you would like to be able to limit searches on item
14199 type and shelving location for example you would enter
14200 itemtypes|loc in the preference input box. The order of these
14201 fields will determine the order of the tabs in the OPAC and
14202 staff client advanced search screens. Values within the search
14203 type are OR'ed together, while each different search type is
14204 AND'ed together in the query limits. The current stored values
14205 are supported without any required modification.Each set of
14206 advanced search fields are displayed in tabs in both the OPAC
14207 and staff client. The first value in the AdvancedSearchTypes
14208 syspref is the selected tab; if no values are present,
14209 "itemtypes" is used. For non-itemtype values, the value in
14210 AdvancedSearchTypes must match the Authorised Value name, and
14211 must be indexed with 'mc-' prefixing that name.</para>
14214 <screeninfo>Searching by Item Type and Shelving
14215 Location</screeninfo>
14219 <imagedata fileref="images/admin/globalprefs/AdvancedSearchTypes.png"/>
14227 <section id="expandedSearchOption">
14228 <title><link linkend="expandedSearchOption">expandedSearchOption</link></title>
14230 <para>Default: don't show</para>
14232 <para>Asks: By default, ___ "More options" on the OPAC and staff
14233 advanced search pages.</para>
14235 <para>Values:</para>
14239 <para>don't show</para>
14247 <section id="IntranetNumbersPreferPhrase">
14248 <title><link linkend="IntranetNumbersPreferPhrase">IntranetNumbersPreferPhrase</link></title>
14249 <para>Default: don't use</para>
14250 <para>Asks: By default, ___ the operator "phr" in the callnumber and standard number
14251 staff client searches </para>
14252 <para>Values:<itemizedlist>
14254 <para>don't use</para>
14259 </itemizedlist></para>
14260 <para>Description:<itemizedlist>
14262 <para>When searching by call number and standard number (biblionumber) in Koha
14263 Staff Client you can choose to force the search to be a phrase search by setting
14264 this preference to 'use.' This will allow for more accurate results over doing a
14265 general keyword field search.</para>
14267 </itemizedlist></para>
14269 <section id="OPACNumbersPreferPhrase">
14270 <title><link linkend="OPACNumbersPreferPhrase">OPACNumbersPreferPhrase</link></title>
14271 <para>Default: don't use</para>
14272 <para>Asks: By default, ___ the operator "phr" in the callnumber and standard number
14273 OPAC searches </para>
14274 <para>Values:<itemizedlist>
14276 <para>don't use</para>
14281 </itemizedlist></para>
14282 <para>Description:<itemizedlist>
14284 <para>When searching by call number and standard number (biblionumber) in the Koha
14285 OPAC you can choose to force the search to be a phrase search by setting this
14286 preference to 'use.' This will allow for more accurate results over doing a
14287 general keyword field search.</para>
14289 </itemizedlist></para>
14294 <section id="serialsprefs">
14295 <title><link linkend="serialsprefs">Serials</link></title>
14297 <para><emphasis>Get there:</emphasis> More > Administration >
14298 Global System Preferences > Serials</para>
14300 <section id="opacSerialDefaultTab">
14301 <title><link linkend="opacSerialDefaultTab">opacSerialDefaultTab</link></title>
14303 <para>Default: Subscriptions tab</para>
14305 <para>Asks: Show ___ as default tab for serials in OPAC. </para>
14307 <para>Values:</para>
14311 <para>Holdings tab</para>
14315 <para>Serial Collection tab</para>
14317 <para>Please note that the Serial Collection tab is currently available only for
14318 systems using the UNIMARC standard.</para>
14321 <screeninfo>Serial Collection tab</screeninfo>
14324 <imagedata fileref="images/admin/globalprefs/opacSerialDefaultTab-colltab.png"/>
14331 <para>Subscriptions tab</para>
14333 <screeninfo>Subscriptions tab</screeninfo>
14336 <imagedata fileref="images/admin/globalprefs/opacSerialDefaultTab-subtab.png"/>
14344 <section id="OPACSerialIssueDisplayCount">
14345 <title><link linkend="OPACSerialIssueDisplayCount">OPACSerialIssueDisplayCount</link></title>
14347 <para>Default: 3</para>
14349 <para>Asks: Show the ___ previous issues of a serial on the
14352 <para>Description:</para>
14356 <para>This preference allows the administrator to select the
14357 number of recent issues for each serial which appear in the OPAC
14358 when the serial is accessed. This is just the default value,
14359 patrons can always click to see a full list of serials.</para>
14364 <section id="RenewSerialAddsSuggestion">
14365 <title><link linkend="RenewSerialAddsSuggestion">RenewSerialAddsSuggestion</link></title>
14367 <para>Default: Don't add</para>
14369 <para>Asks: ___ a suggestion for a biblio when its attached serial
14372 <para>Values:</para>
14380 <para>Don't add</para>
14384 <para>Description:</para>
14388 <para>If set to "Add", this preference will automatically add a
14389 serial to the Acquisitions Purchase Suggestions menu when
14390 clicking the 'renew' option. If you don't use the Acquisitions
14391 module to manage serials purchases it's best to leave this set
14392 as 'Don't add.'</para>
14397 <section id="RoutingListAddReserves">
14398 <title><link linkend="RoutingListAddReserves">RoutingListAddReserves</link></title>
14400 <para>Default: Place</para>
14402 <para>Asks: ___ received serials on hold if they are on a routing
14405 <para>Values:</para>
14413 <para>Don't place</para>
14418 <section id="RoutingListNote">
14419 <title><link linkend="RoutingListNote">RoutingListNote</link></title>
14421 <para>Asks: Include following note on all routing lists</para>
14423 <para>Description:</para>
14427 <para>Text entered in this box will appear below the routing
14428 list information.</para>
14433 <section id="RoutingSerials">
14434 <title><link linkend="RoutingSerials">RoutingSerials</link></title>
14436 <para>Default: Don't add</para>
14438 <para>Asks: ___ received serials to the routing list.</para>
14440 <para>Description:</para>
14444 <para>This preference determines if serials routing lists are
14445 enabled or disabled for the library. When set to "Add", serials
14446 routing is enabled and a serial can be directed through a list
14447 of people by identifying who should receive it next. The list of
14448 people can be established for each serial to be passed using the
14449 Serials module. This preference can be used to ensure each
14450 person who needs to see a serial when it arrives at the library
14451 will get it. Learn more in the <link linkend="routinglist">routing list</link> section of this
14456 <para>Values:</para>
14464 <para>Don't add</para>
14469 <section id="StaffSerialIssueDisplayCount">
14470 <title><link linkend="StaffSerialIssueDisplayCount">StaffSerialIssueDisplayCount</link></title>
14472 <para>Default: 3</para>
14474 <para>Asks: Show the ___ previous issues of a serial on the staff
14477 <para>Description:</para>
14481 <para>This preference allows the administrator to select the
14482 number of recent issues for each serial which appear in the
14483 Staff Client when the serial is accessed. This is just the
14484 default value, staff members can always click to see a full list
14490 <section id="SubscriptionDuplicateDroppedInput">
14491 <title><link linkend="SubscriptionDuplicateDroppedInput">SubscriptionDuplicateDroppedInput</link></title>
14493 <para>Asks: List of fields which must not be rewritten when a
14494 subscription is duplicated (Separated by pipe |) ___</para>
14496 <para>Description:</para>
14500 <para>When duplicating a subscription sometimes you don't want
14501 all of the fields duplicated, using this preference you can list
14502 the fields that you don't want to be duplicated. These field
14503 names come from the subscription table in the Koha database.
14504 Learn what fields are in that table on the <ulink url="http://schema.koha-community.org/tables/subscription.html">Koha
14505 DB Schema</ulink> site.</para>
14510 <section id="SubscriptionHistory">
14511 <title><link linkend="SubscriptionHistory">SubscriptionHistory</link></title>
14513 <para>Default: full history</para>
14515 <para>Asks: When showing the subscription information for a
14516 bibliographic record, preselect ___ view of serial issues.</para>
14518 <para>Values:</para>
14522 <para>brief history</para>
14525 <screeninfo>Brief History</screeninfo>
14529 <imagedata fileref="images/admin/globalprefs/SubscriptionHistory-brief.png"/>
14536 <para>full history</para>
14539 <screeninfo>Full History</screeninfo>
14543 <imagedata fileref="images/admin/globalprefs/SubscriptionHistory-full.png"/>
14550 <para>Description:</para>
14554 <para>This preference determines what information appears in the
14555 OPAC when the user clicks the More Details option. The 'brief'
14556 option displays a one-line summary of the volume and issue
14557 numbers of all issues of that serial held by the library. The
14558 'full' option displays a more detailed breakdown of issues per
14559 year, including information such as the issue date and the
14560 status of each issue.</para>
14566 <section id="staffprefs">
14567 <title><link linkend="staffprefs">Staff Client</link></title>
14569 <para><emphasis>Get there:</emphasis> More > Administration >
14570 Global System Preferences > Staff Client</para>
14572 <section id="staffappearprefs">
14573 <title><link linkend="staffappearprefs">Appearance</link></title>
14577 <section id="Display856uAsImage">
14578 <title><link linkend="Display856uAsImage">Display856uAsImage</link></title>
14580 <para>Default: Neither details or results page</para>
14582 <para>Asks: Display the URI in the 856u field as an image on:
14585 <para>Values:</para>
14589 <para>Both results and details pages</para>
14594 <para>Not implemented yet</para>
14601 <para>Detail page only</para>
14606 <para><link linkend="XSLTDetailsDisplay">XSLTDetailsDisplay</link>
14607 needs to be on for this preference to work.</para>
14613 <screeninfo>Showing the 856u as an image</screeninfo>
14617 <imagedata fileref="images/admin/globalprefs/Display856uAsImage.png"/>
14624 <para>Neither details or results page</para>
14628 <para>Results page only</para>
14633 <para>Not yet implemented</para>
14640 <para>Description:</para>
14644 <para>In addition to this option being set, the corresponding
14645 XSLT option must be turned on. Also, the corresponding 856q
14646 field must have a valid MIME image extension (e.g., "jpg") or
14647 MIME image type (i.e. starting with "image/"), or the generic
14648 indicator "img" entered in the field. When all of the
14649 requirements are met, an image file will be displayed instead
14650 of the standard link text. Clicking on the image will open it
14651 in the same way as clicking on the link text. When you click
14652 on the image it should open to full size, in the current
14653 window or in a new window depending on the value in the system
14654 pref <link linkend="OPACURLOpenInNewWindow">OPACURLOpenInNewWindow</link>.</para>
14657 <screeninfo>Sample 856 Field</screeninfo>
14661 <imagedata fileref="images/admin/globalprefs/856imagemarc.png"/>
14668 <section id="DisplayIconsXSLT">
14669 <title><link linkend="DisplayIconsXSLT">DisplayIconsXSLT</link></title>
14670 <para>Default: Show</para>
14671 <para>Asks: ___ the format, audience, and material type icons in XSLT MARC21 results and
14672 detail pages in the staff client.<important>
14673 <para><link linkend="XSLTResultsDisplay">XSLTResultsDisplay</link> and/or <link linkend="XSLTDetailsDisplay">XSLTDetailsDisplay</link> must be set to use an
14674 XSLT stylesheet (default or custom) for these icons to show.</para>
14675 </important></para>
14676 <para>Values:</para>
14679 <para>Don't show</para>
14684 <screeninfo>DisplayIconsXSLT</screeninfo>
14687 <imagedata fileref="images/admin/globalprefs/DisplayIconsXSLT.png"/>
14695 <para>See the <link linkend="XSLTiTypes">XSLT Icon Guide</link> for more information
14696 on these icons.</para>
14701 <section id="intranet_includes">
14702 <title><link linkend="intranet_includes">intranet_includes</link></title>
14704 <para>Default: includes</para>
14706 <para>Asks: Use include files from the ___ directory in the
14707 template directory, instead of includes/. (Leave blank to
14710 <section id="IntranetCirculationHomeHTML">
14711 <title><link linkend="IntranetCirculationHomeHTML">IntranetCirculationHomeHTML</link></title>
14712 <para>Asks: Show the following HTML in its own div on the bottom of the home page of the
14713 circulation module: <screenshot>
14714 <screeninfo>IntranetCirculationHomeHTML</screeninfo>
14717 <imagedata fileref="images/admin/globalprefs/IntranetCirculationHomeHTML.png"/>
14720 </screenshot></para>
14723 <section id="intranetcolorstylesheet">
14724 <title><link linkend="intranetcolorstylesheet">intranetcolorstylesheet</link></title>
14726 <para>Asks: Include the additional CSS stylesheet ___ to override specified settings
14727 from the default stylesheet</para>
14729 <para>Description:</para>
14733 <para>This preference is used to set the background color and style of the Staff
14734 Client. The value is a .css file. The system administrator should determine which
14735 file is appropriate. Enter just a filename, a full local path or a complete URL
14736 starting with http:// (if the file lives on a remote server). Please note that if
14737 you just enter a filename, the file should be in the css subdirectory for each
14738 active theme and language within the Koha templates directory. A full local path
14739 is expected to start from your HTTP document root. </para>
14744 <para>Leave this field blank to disable.</para>
14748 <section id="IntranetFavicon">
14749 <title><link linkend="IntranetFavicon">IntranetFavicon</link></title>
14751 <para>Asks: Use the image at ___ for the Staff Client's favicon.
14753 <para>This should be a complete URL, starting with
14755 </important></para>
14758 <para>Turn your logo into a favicon with the <ulink url="http://antifavicon.com/">Favicon Generator</ulink>.</para>
14761 <para>Description:</para>
14765 <para>The favicon is the little icon that appears next to the
14766 URL in the address bar in most browsers. The default value for
14767 this field (if left blank) is the small 'K' in the Koha
14771 <screeninfo>Default Koha Favicon</screeninfo>
14775 <imagedata fileref="images/admin/globalprefs/favicon.png"/>
14783 <section id="IntranetmainUserblock">
14784 <title><link linkend="IntranetmainUserblock">IntranetmainUserblock</link></title>
14786 <para>Asks: Show the following HTML in its own column on the main
14787 page of the staff client</para>
14790 <screeninfo>Sample HTML for IntranetmainUserblock</screeninfo>
14794 <imagedata fileref="images/admin/globalprefs/IntranetmainUserblock-html.png"/>
14800 <screeninfo>Message from IntranetmainUserblock as it appears on
14801 the Staff Client main page</screeninfo>
14805 <imagedata fileref="images/admin/globalprefs/IntranetmainUserblock.png"/>
14811 <section id="IntranetNav">
14812 <title><link linkend="IntranetNav">IntranetNav</link></title>
14814 <para>Asks: Show the following HTML in the More menu at the top of
14815 each page on the staff client (should be a list of links or
14818 <section id="IntranetReportsHomeHTML">
14819 <title><link linkend="IntranetReportsHomeHTML">IntranetReportsHomeHTML</link></title>
14820 <para>Asks: Show the following HTML in its own div on the bottom of the home page of the
14821 reports module: <screenshot>
14822 <screeninfo>HTML on Reports page</screeninfo>
14825 <imagedata fileref="images/admin/globalprefs/IntranetReportsHomeHTML.png"/>
14828 </screenshot></para>
14831 <section id="IntranetSlipPrinterJS">
14832 <title><link linkend="IntranetSlipPrinterJS">IntranetSlipPrinterJS</link></title>
14834 <para>Asks: Use the following JavaScript for printing
14837 <para>Description:</para>
14841 <para>The most logical use of this preference is in
14842 conjunction with the <ulink url="http://jsprintsetup.mozdev.org/">jsPrintSetup</ulink>
14843 Firefox add-on. Learn more about this preference and the
14844 add-on setup on the Koha wiki at <ulink url="http://wiki.koha-community.org/wiki/Setting_up_slip_printer_to_print_silently">http://wiki.koha-community.org/wiki/Setting_up_slip_printer_to_print_silently</ulink>.</para>
14849 <section id="intranetstylesheet">
14850 <title><link linkend="intranetstylesheet">intranetstylesheet</link></title>
14852 <para>Asks: Use the CSS stylesheet ___ on all pages in the staff interface, instead of
14853 the default css (used when leaving this field blank). </para>
14855 <para>Description:</para>
14859 <para>The Intranetstylesheet preference is a layout and design feature for the
14860 intranet or staff client. This preference allows a library to customize the
14861 appearance of the Staff Client. Enter just a filename, a full local path or a
14862 complete URL starting with http:// (if the file lives on a remote server). Please
14863 note that if you just enter a filename, the file should be in the css subdirectory
14864 for each active theme and language within the Koha templates directory. A full
14865 local path is expected to start from your HTTP document root. </para>
14870 <section id="IntranetUserCSS">
14871 <title><link linkend="IntranetUserCSS">IntranetUserCSS</link></title>
14873 <para>Asks: Include the following CSS on all pages in the staff
14877 <section id="intranetuserjs">
14878 <title><link linkend="intranetuserjs">IntranetUserJS</link></title>
14880 <para>Asks: Include the following JavaScript on all pages in the
14881 staff interface</para>
14883 <para>Description:</para>
14887 <para>This preference allows the administrator to enter
14888 JavaScript or JQuery that will be embedded across all pages of
14889 the Staff Client. Administrators may use this preference to
14890 customize some of the interactive sections of Koha,
14891 customizing the text for the login prompts, for example.
14892 Sample JQuery scripts used by Koha libraries can be found on
14893 the wiki: <ulink url="http://wiki.koha-community.org/wiki/JQuery_Library">http://wiki.koha-community.org/wiki/JQuery_Library</ulink>.</para>
14898 <section id="SlipCSS">
14899 <title><link linkend="SlipCSS">SlipCSS</link></title>
14901 <para>Asks: Include the stylesheet at ___ on Issue and Reserve
14903 <para>This should be a complete URL, starting with
14905 </important></para>
14907 <para>Description:</para>
14911 <para>If you would like to style your receipts or slips with a
14912 consistent set of fonts and colors you can use this preference
14913 to point Koha to a stylesheet specifically for your
14919 <section id="StaffAuthorisedValueImages">
14920 <title><link linkend="StaffAuthorisedValueImages">StaffAuthorisedValueImages</link></title>
14922 <para>Default: Show</para>
14924 <para>Asks: ___ images for authorized values (such as lost
14925 statuses and locations) in search results.</para>
14927 <para>Values:</para>
14931 <para>Don't show</para>
14940 <section id="staffClientBaseURL">
14941 <title><link linkend="staffClientBaseURL">staffClientBaseURL</link></title>
14943 <para>Asks: The staff client is located at http:// ___</para>
14946 <section id="template">
14947 <title><link linkend="template">template</link></title>
14949 <para>Default: prog</para>
14951 <para>Asks: Use the ___ theme on the staff interface.</para>
14953 <para>Values:</para>
14961 <para>Do not include a trailing slash in the URL this will break links created using
14962 this URL. (example: www.google.com not www.google.com/)</para>
14966 <section id="XSLTDetailsDisplay">
14967 <title><link linkend="XSLTDetailsDisplay">XSLTDetailsDisplay</link></title>
14969 <para>Default: default</para>
14971 <para>Asks: Display details in the staff client using XSLT
14972 stylesheet at ___</para>
14974 <para>Values:</para>
14978 <para>leave empty to not use the XSLT stylesheet</para>
14982 <para>In previous versions of Koha this was the setting
14983 that read 'normally'</para>
14986 <screeninfo>Detail display without XSLT
14987 stylesheets</screeninfo>
14991 <imagedata fileref="images/admin/globalprefs/XSLTDetailsDisplay-off.png"/>
15000 <para>enter "default" for the default one</para>
15003 <screeninfo>Detail display using XSLT
15004 stylesheets</screeninfo>
15008 <imagedata fileref="images/admin/globalprefs/XSLTDetailsDisplay-on.png"/>
15015 <para>put a path to define a XSLT file</para>
15019 <para>ex: /path/to/koha/and/your/stylesheet.xsl</para>
15023 <para>If in a multi-language system you can enter
15024 {langcode} in the path to tell Koha to look in the right
15025 language folder</para>
15030 /home/koha/src/koha-tmpl/intranet-tmpl/prog/{langcode}/xslt/intranetDetail.xsl</para>
15035 http://mykoha.org/{langcode}/stylesheet.xsl</para>
15043 <para>put an URL for an external specific stylesheet</para>
15047 <para>ex: http://mykoha.org/stylesheet.xsl</para>
15053 <para>Description:</para>
15057 <para>XSLT stylesheets allow for the customization of the
15058 details shows on the screen when viewing a bib record. This
15059 preference will allow you either use the default look that
15060 comes with Koha or design your own stylesheet.</para>
15065 <section id="XSLTResultsDisplay">
15066 <title><link linkend="XSLTResultsDisplay">XSLTResultsDisplay</link></title>
15068 <para>Default: default</para>
15070 <para>Asks: Display results in the staff client using XSLT
15071 stylesheet at ___</para>
15073 <para>Values:</para>
15077 <para>leave empty to not use the XSLT stylesheet</para>
15081 <para>In previous versions of Koha this was the setting
15082 that read 'normally'</para>
15088 <para>enter "default" for the default one</para>
15092 <para>put a path to define a XSLT file</para>
15096 <para>ex: /path/to/koha/and/your/stylesheet.xsl</para>
15100 <para>If in a multi-language system you can enter
15101 {langcode} in the path to tell Koha to look in the right
15102 language folder</para>
15107 /home/koha/src/koha-tmpl/intranet-tmpl/prog/{langcode}/xslt/intranetDetail.xsl</para>
15112 http://mykoha.org/{langcode}/stylesheet.xsl</para>
15120 <para>put an URL for an external specific stylesheet</para>
15124 <para>ex: http://mykoha.org/stylesheet.xsl</para>
15130 <para>Description:</para>
15134 <para>XSLT stylesheets allow for the customization of the
15135 details shows on the screen when viewing the search results.
15136 This preference will allow you either use the default look
15137 that comes with Koha or design your own stylesheet.</para>
15143 <section id="staffoptsprefs">
15144 <title><link linkend="staffoptsprefs">Options</link></title>
15146 <section id="HidePatronName">
15147 <title><link linkend="HidePatronName">HidePatronName</link></title>
15149 <para>Default: Show</para>
15151 <para>Asks: ___ the names of patrons that have items checked out
15152 or on hold on detail pages or the "Place Hold" screen.</para>
15154 <para>Values:</para>
15158 <para>Don't show</para>
15167 <section id="intranetbookbag">
15168 <title><link linkend="intranetbookbag">intranetbookbag</link></title>
15170 <para>Default: Show</para>
15172 <para>Asks: ___ the cart option in the staff client.</para>
15174 <para>Values:</para>
15178 <para>Don't show</para>
15186 <section id="StaffDetailItemSelection">
15187 <title><link linkend="StaffDetailItemSelection">StaffDetailItemSelection</link></title>
15188 <para>Default: Enable</para>
15189 <para>Asks: ___ item selection in record detail page. </para>
15190 <para>Values:<itemizedlist>
15192 <para>Disable</para>
15195 <para>Enable</para>
15197 </itemizedlist></para>
15198 <para>Description:<itemizedlist>
15200 <para>This preference lets you choose to show (or not show) checkboxes to the left
15201 of every item in the holdings tab on the detail display of a record in the staff
15202 client. Showing these checkboxes allows the staff members to select multiple
15203 items to edit or delete at once.</para>
15205 <screeninfo>Items with the checkboxes enabled</screeninfo>
15208 <imagedata fileref="images/admin/globalprefs/StaffDetailItemSelection.png"/>
15213 </itemizedlist></para>
15215 <section id="UseWYSIWYGinSystemPreferences">
15216 <title><link linkend="UseWYSIWYGinSystemPreferences">UseWYSIWYGinSystemPreferences</link></title>
15217 <para>Default: Don't show</para>
15218 <para>Asks: ___ WYSIWYG editor when editing certain HTML system preferences.</para>
15219 <para>Values:<itemizedlist>
15221 <para>Don't show</para>
15224 <para>Show<screenshot>
15225 <screeninfo>WYSIWYG Editor in Sys Prefs</screeninfo>
15228 <imagedata fileref="images/admin/globalprefs/UseWYSIWYGinSystemPreferences.png"/>
15231 </screenshot></para>
15233 </itemizedlist></para>
15234 <para>Description:<itemizedlist>
15236 <para>This preference allows you to chang system preferences with HTML in them to
15237 WYSIWYG editors instead of plain text boxes.</para>
15239 </itemizedlist></para>
15242 <section id="viewISBD">
15243 <title><link linkend="viewISBD">viewISBD</link></title>
15245 <para>Default: Allow</para>
15247 <para>Asks: ___ staff to view records in ISBD form on the staff
15250 <para>Values:</para>
15258 <para>Don't allow</para>
15263 <section id="viewLabeledMARC">
15264 <title><link linkend="viewLabeledMARC">viewLabeledMARC</link></title>
15266 <para>Default: Allow</para>
15268 <para>Asks: ___ staff to view records in labeled MARC form on the
15269 staff client.</para>
15271 <para>Values:</para>
15279 <para>Don't allow</para>
15284 <section id="viewMARC">
15285 <title><link linkend="viewMARC">viewMARC</link></title>
15287 <para>Default: Allow</para>
15289 <para>Asks: ___ staff to view records in plain MARC form on the
15290 staff client.</para>
15292 <para>Values:</para>
15300 <para>Don't allow</para>
15306 <section id="toolsprefs">
15307 <title><link linkend="toolsprefs">Tools</link></title>
15308 <para><emphasis>Get there:</emphasis> More > Administration > Global System
15309 Preferences > Tools</para>
15310 <section id="batchitemodprefs">
15311 <title><link linkend="batchitemodprefs">Batch Item Modification</link></title>
15312 <para>These preferences are in reference to the <link linkend="batchmodifyitems">Batch
15313 Item Modification</link> tool.</para>
15314 <section id="MaxItemsForBatch">
15315 <title><link linkend="MaxItemsForBatch">MaxItemsForBatch</link></title>
15316 <para>Default: 1000</para>
15317 <para>Asks: Process up to ___ items in a single modification or deletion batch. </para>
15318 <para>Description:<itemizedlist>
15320 <para>In the <link linkend="batchdeleteitems">batch item delete tool</link> this
15321 will prevent the display of more than the items you entered in this preference,
15322 but you will be able to delete more than the number you enter here. In the <link linkend="batchmodifyitems">batch item modification tool</link> this preference
15323 will prevent the editing of more than the number entered here.</para>
15325 </itemizedlist></para>
15328 <section id="newstoolprefs">
15329 <title><link linkend="newstoolprefs">News</link></title>
15330 <section id="NewsAuthorDisplay">
15331 <title><link linkend="NewsAuthorDisplay">NewsAuthorDisplay</link></title>
15332 <para>Default: not at all</para>
15333 <para>Asks: Show the author for news items: ___</para>
15334 <para>Values:<itemizedlist>
15336 <para>Both OPAC and staff client</para>
15339 <para>Not at all</para>
15342 <para>OPAC only</para>
15345 <para>Staff client only</para>
15347 </itemizedlist></para>
15350 <section id="patcardprefs">
15351 <title><link linkend="patcardprefs">Patron Cards</link></title>
15352 <para>These preferences are in reference to the <link linkend="patroncardcreator">Patron
15353 Card Creator</link> tool.</para>
15354 <section id="ImageLimit">
15355 <title><link linkend="ImageLimit">ImageLimit</link></title>
15356 <para>Asks: Limit the number of creator images stored in the database to ___
15362 <section id="webserviceprefs">
15363 <title><link linkend="webserviceprefs">Web Services</link></title>
15365 <para><emphasis>Get there:</emphasis> More > Administration >
15366 Global System Preferences > Web Services</para>
15367 <section id="idref">
15368 <title><link linkend="idref">IdRef</link></title>
15369 <para>Default: Disable</para>
15370 <para>Asks: ___ the IdRef webservice from the opac detail page. IdRef allows to request
15371 authorities from the Sudoc database. </para>
15372 <para>Values:<itemizedlist>
15374 <para>Disable</para>
15377 <para>Enable</para>
15379 </itemizedlist></para>
15380 <para>Description:<itemizedlist>
15382 <para>IdRef is a French service for Sudoc autorities. Using the <ulink url="http://www.sudoc.abes.fr/">Sudoc database</ulink>, it allows to request /
15383 modify / add authorities. If a record comes from the Sudoc (so 009 is filled with
15384 an integer), at the OPAC you will see "Author: Idref" if a 7..$3 (unimarc author)
15385 if filled with a ppn. On clicking on the Idref link, a popup will display. <screenshot>
15386 <screeninfo>IdRef link</screeninfo>
15389 <imagedata fileref="images/admin/globalprefs/idref1.png"/>
15392 </screenshot></para>
15393 <para>The Idref webservice is requested and all records (by roles) for this author
15394 will be displayed<screenshot>
15395 <screeninfo>Sudoc</screeninfo>
15398 <imagedata fileref="images/admin/globalprefs/idref2.png"/>
15401 </screenshot></para>
15402 <para>There is 1 line / record and 2 links at the end. 1 will request Koha
15403 (cgi-bin/koha/opac-search.pl?q=ident:003381862), the other one will redirect to
15404 the sudoc page (http://www.sudoc.fr/003381862).</para>
15409 <para>Please note that this feature is available only for libraries using
15416 <para>The French Sudoc database should not be confused with the US Superintendent
15417 of Documents (SuDocs) Classification Scheme.</para>
15420 </itemizedlist></para>
15423 <section id="ilsdiprefs">
15424 <title><link linkend="ilsdiprefs">ILS-DI</link></title>
15428 <section id="ILS-DI">
15429 <title><link linkend="ILS-DI">ILS-DI</link></title>
15431 <para>Default: Disable</para>
15433 <para>Asks: ___ ILS-DI services for OPAC users</para>
15435 <para>Values:</para>
15439 <para>Disable</para>
15443 <para>Enable</para>
15448 <section id="ILS-DIAuthorized_IPs">
15449 <title><link linkend="ILS-DIAuthorized_IPs">ILS-DI:AuthorizedIPs</link></title>
15451 <para>Asks: ___ allowed IPs to use the ILS-DI services</para>
15455 <section id="oaiprefs">
15456 <title><link linkend="oaiprefs">OAI-PMH</link></title>
15458 <section id="OAI-PMH">
15459 <title><link linkend="OAI-PMH">OAI-PMH</link></title>
15461 <para>Default: Disable</para>
15463 <para>Asks: ___ Koha's OAI-PMH server.</para>
15465 <para>Values:</para>
15469 <para>Disable</para>
15473 <para>Enable</para>
15477 <para>Description:</para>
15481 <para>Once enabled you can visit http://YOURKOHACATALOG/cgi-bin/koha/oai.pl to see
15482 your file. For the Open Archives Initiative-Protocol for Metadata Harvesting
15483 (OAI-PMH) there are two groups of 'participants': Data Providers and Service
15484 Providers. Data Providers (open archives, repositories) provide free access to
15485 metadata, and may, but do not necessarily, offer free access to full texts or
15486 other resources. OAI-PMH provides an easy to implement, low barrier solution for
15487 Data Providers. Service Providers use the OAI interfaces of the Data Providers to
15488 harvest and store metadata. Note that this means that there are no live search
15489 requests to the Data Providers; rather, services are based on the harvested data
15490 via OAI-PMH. Koha at present can only act as a Data Provider. It can not harvest
15491 from other repositories. The biggest stumbling block to having Koha harvest from
15492 other repositories is that MARC is the only metadata format that Koha indexes
15493 natively. Visit <ulink url="http://www.oaforum.org/tutorial/english/page3.htm">http://www.oaforum.org/tutorial/english/page3.htm</ulink> for diagrams of how
15494 OAI-PMH works.</para>
15498 <para>Learn more about OAI-PMH at: <ulink url="http://www.openarchives.org/pmh/">http://www.openarchives.org/pmh/</ulink></para>
15501 <section id="OAI-PMHarchiveID">
15502 <title><link linkend="OAI-PMHarchiveID">OAI-PMH:archiveID</link></title>
15504 <para>Default: KOHA-OAI-TEST</para>
15506 <para>Asks: Identify records at this site with the prefix ___
15510 <section id="OAI-PMHAutoUpdateSets">
15511 <title><link linkend="OAI-PMHAutoUpdateSets">OAI-PMH:AutoUpdateSets</link></title>
15513 <para>Default: Disable</para>
15515 <para>Asks: ___ automatic update of OAI-PMH sets when a
15516 bibliographic record is created or updated.</para>
15518 <para>Values:</para>
15522 <para>Disable</para>
15526 <para>Enable</para>
15531 <section id="OAI-PMHConfFile">
15532 <title><link linkend="OAI-PMHConfFile">OAI-PMH:ConfFile</link></title>
15534 <para>If this preference is left empty, Koha's OAI Server operates
15535 in normal mode, otherwise it operates in extended mode. In
15536 extended mode, it's possible to parameter other formats than
15537 marcxml or Dublin Core. OAI-PMH:ConfFile specify a YAML
15538 configuration file which list available metadata formats and XSL
15539 file used to create them from marcxml records.</para>
15541 <para>For more information, see the <link linkend="oaiconfsample">sample conf file</link> in the
15544 <section id="OAI-PMHDeletedRecord">
15545 <title><link linkend="OAI-PMHDeletedRecord">OAI-PMH:DeletedRecord</link></title>
15546 <para>Default: will never be emptied or truncated (persistent)</para>
15547 <para>Asks: Koha's deletedbiblio table ___</para>
15548 <para>Values:<itemizedlist>
15550 <para>will never have any data in it (no)</para>
15553 <para>will never be emptied or truncated (persistent)</para>
15556 <para>might be emptied or truncated at some point (transient)</para>
15558 </itemizedlist></para>
15561 <section id="OAI-PMHMaxCount">
15562 <title><link linkend="OAI-PMHMaxCount">OAI-PMH:MaxCount</link></title>
15564 <para>Default: 50</para>
15566 <para>Asks: Only return ___ records at a time in response to a
15567 ListRecords or ListIdentifiers query.</para>
15569 <para>Description:</para>
15573 <para>This is the maximum number of records that would be
15574 returned based on ListRecord or ListIdentifier queries from
15575 harvesters. ListRecords harvest the entire records while the
15576 ListIdentifier is an abbreviated form of ListRecords,
15577 retrieving only headers rather than records.</para>
15582 <section id="reportingservice">
15583 <title><link linkend="reportingservice">Reporting</link></title>
15584 <section id="SvcMaxReportRows">
15585 <title><link linkend="SvcMaxReportRows">SvcMaxReportRows</link></title>
15586 <para>Default: 10</para>
15587 <para>Asks: Only return ___ rows of a report requested via the reports web
15589 <para>Description:<itemizedlist>
15591 <para>This value will be used to limit the number of results returned by <link linkend="publicreport">public reports</link>.</para>
15593 </itemizedlist></para>
15599 <section id="basicparams">
15600 <title><link linkend="basicparams">Basic Parameters</link></title>
15602 <para><emphasis>Get there:</emphasis> More > Administration</para>
15605 <para>Configure all 'parameters' in the order they appear.</para>
15608 <section id="libsgroups">
15609 <title><link linkend="libsgroups">Libraries & Groups</link></title>
15611 <para>When setting up your Koha system you will want to add
15612 information for every library that will be sharing your system. This
15613 data is used in several areas of Koha.</para>
15617 <para><emphasis>Get there:</emphasis> More > Administration
15618 > Basic Parameters > Libraries and Groups</para>
15622 <para>When visiting this page you are presented with a list of the
15623 libraries and groups that have already been added to the
15627 <screeninfo>Library List</screeninfo>
15631 <imagedata fileref="images/admin/basicparams/librarylist.png"/>
15637 <screeninfo>Group Lists</screeninfo>
15641 <imagedata fileref="images/admin/basicparams/grouplists.png"/>
15646 <section id="addingalibrary">
15647 <title><link linkend="addingalibrary">Adding a Library</link></title>
15649 <para>To add a new library:</para>
15653 <para>Click 'New Library'</para>
15657 <para>The top of the form asks for some basics about the
15661 <screeninfo>Basic Library Info</screeninfo>
15665 <imagedata fileref="images/admin/basicparams/newlibrary.png"/>
15672 <para>The library code should not contain any spaces and be
15673 10 or fewer characters. This code will be used as a unique
15674 identifier in the database.</para>
15678 <para>The name will be displayed on the OPAC wherever the
15679 library name displays to the public and should be a name
15680 that makes sense to your patrons.</para>
15684 <para>If you have <link linkend="addinglibgroup">groups</link> set up you can choose
15685 what group this library belongs to after entering in the
15686 code and name</para>
15692 <para>Next you can enter basic contact info about the
15696 <screeninfo>Library Contact Info</screeninfo>
15700 <imagedata fileref="images/admin/basicparams/librarycontact.png"/>
15707 <para>The address and contact fields can be used to make
15708 notices custom for each library</para>
15712 <para>The email address field is not required, but it should
15713 be filled for every library in your system</para>
15718 <para>Be sure to enter a library email address to make
15719 sure that notices are sent to and from the right
15727 <para>If you'd like you can enter a different 'Reply-To' email address. This is
15728 the email address that all replies will go to.<itemizedlist>
15732 <para>If you do not fill in this value Koha will use the address in the
15733 <link linkend="ReplytoDefault">ReplytoDefault</link>
15738 </itemizedlist></para>
15741 <para>If you'd like you can also enter a different 'Return-Path' email address.
15742 This is the email address that all bounced messages will go to.<itemizedlist>
15745 <para>If you do not fill in this value Koha will use the address in the
15746 <link linkend="ReturnpathDefault">ReturnpathDefault</link>
15750 </itemizedlist></para>
15753 <para>If the URL field is populated then the library name will be linked in the
15754 holdings table on the OPAC</para>
15756 <screeninfo>Linked Library Name</screeninfo>
15759 <imagedata fileref="images/admin/basicparams/librarylink.png"/>
15766 <para>The OPAC Info box is for you to put information about
15767 the library that will appear in the OPAC when the branch
15768 name is moused over in the holdings table</para>
15771 <screeninfo>OPAC Info</screeninfo>
15775 <imagedata fileref="images/admin/basicparams/opacinfo.png"/>
15782 <para>IP Address does not have be filled in unless you plan
15783 on limiting access to your staff client to a specific IP
15789 <para>An IP address is required if you have enabled
15790 <link linkend="AutoLocation">AutoLocation</link></para>
15797 <para>Finally, if you have any notes you can put them here.
15798 These will not show in the OPAC</para>
15805 <para>Of the fields listed, only 'Library code' and 'Name' are
15812 <section id="editingalibrary">
15813 <title><link linkend="editingalibrary">Editing/Deleting a Library</link></title>
15815 <para>You will be unable to delete any library that has patrons or
15816 items attached to it.</para>
15819 <screeninfo>Staff will be presented with a warning when trying to
15820 delete a library that is being used</screeninfo>
15824 <imagedata fileref="images/admin/basicparams/cannotdeletelibrary.png"/>
15829 <para>Each library will have an 'Edit' link to the right of it.
15830 Click this link to edit/alter details associated with the library in
15834 <para>You will be unable to edit the 'Library code'</para>
15838 <section id="addinglibgroup">
15839 <title><link linkend="addinglibgroup">Adding a group</link></title>
15841 <para>To add a Search Domain or Library Property Group click the
15842 'New Group' button at the top of the screen</para>
15845 <screeninfo>Add group form</screeninfo>
15849 <imagedata fileref="images/admin/basicparams/addlibgroup.png"/>
15853 <para>Give the group a 'Category type; of 'searchdomain' and if you would like the group
15854 to show up in the library pull down at the top of the OPAC (with <link linkend="OpacAddMastheadLibraryPulldown">OpacAddMastheadLibraryPulldown</link> set to
15855 'Add') and on the advanced search page you can check the 'Show in search pulldown'
15858 <para>Of the fields on the group form, 'Category code', 'Name', and 'Category type' are
15859 the only required fields</para>
15861 <section id="searchdomaingroups">
15862 <title><link linkend="searchdomaingroups">Search Domain Groups</link></title>
15864 <para>Search Domain Groups allow you to search a group of
15865 libraries at the same time instead of searching just one library
15866 or all libraries.</para>
15869 <screeninfo>Search Domain Groups</screeninfo>
15873 <imagedata fileref="images/admin/basicparams/searchgroup.png"/>
15878 <para>To see Search Domain Groups in action visit the staff client
15879 advanced search page in your Koha system:</para>
15882 <screeninfo>Library group search on staff client</screeninfo>
15886 <imagedata fileref="images/admin/basicparams/stafflibgroupsearch.png"/>
15892 <section id="libpropertygroups">
15893 <title><link linkend="libpropertygroups">Library Property Groups</link></title>
15895 <para>You can assign specific categories to your libraries by
15896 adding groups for them</para>
15899 <screeninfo>Library Property Groups</screeninfo>
15903 <imagedata fileref="images/admin/basicparams/groupproperties.png"/>
15908 <para>Properties are then applied to libraries via the add or edit
15909 library form</para>
15912 <screeninfo>Groups on the Add/Modify library form</screeninfo>
15916 <imagedata fileref="images/admin/basicparams/addlibrarytogroup.png"/>
15924 <section id="itemtypeadmin">
15925 <title><link linkend="itemtypeadmin">Item Types</link></title>
15927 <para>Koha allows you to organize your collection by item types and
15928 collection codes.</para>
15932 <para><emphasis>Get there:</emphasis> More > Administration
15933 > Basic Parameters > Item Types</para>
15937 <para>Item types typically refer to the material type (book, cd, dvd,
15938 etc), but can be used in any way that works for your library.</para>
15941 <screeninfo>Item Types</screeninfo>
15945 <imagedata fileref="images/admin/basicparams/itemtypes.png"/>
15950 <section id="additemtype">
15951 <title><link linkend="additemtype">Adding Item Types</link></title>
15953 <para>To add a new item type, simply click the 'New Item Type'
15954 button at the top of the Item Types page.</para>
15957 <screeninfo>New Item Type</screeninfo>
15961 <imagedata fileref="images/admin/basicparams/additemtype.png"/>
15968 <para>In the 'Item Type' field, enter a short code for your item
15973 <para>The description is the plain text definition of the item type (for those with
15974 multiple languages installed you can translate the item type description in to all
15975 of those languages using the 'Translate in to other languages' link)</para>
15978 <para>Item types and can grouped together for searching at the same time. For example
15979 you can put DVDs and Bluray in to a group called Movie and then they can be searched
15980 together. These groups are defined in the ITEMTYPECAT authorized value.</para>
15984 <para>You can choose to have an image associated with your item
15989 <para>You can choose from a series of image
15994 <para>You can link to a remote image</para>
15998 <para>Or you can just have no image associated with the item
16004 <para>To have your item type images appear in the OPAC you need to set <link
16005 linkend="noItemTypeImages">noItemTypeImages</link> to 'Show'</para>
16010 <para><emphasis>Get there: </emphasis>More >
16011 Administration > Global System Preferences > <link linkend="adminprefs">Admin</link></para>
16018 <para>For items that you are suppressing from the OPAC you can hide their item type
16019 from being searched in the OPAC</para>
16023 <para>For items that do not circulate, check the 'Not for loan'
16028 <para>Items marked 'Not for loan' will appear in the
16029 catalog, but cannot be checked out to patrons</para>
16035 <para id="rentalcharge">For items that you charge a rental fee
16036 for, enter the total fee you charge in the 'Rental charge'
16042 <para>Do not enter symbols in this field, only numbers and
16043 decimal points (ex. $5.00 should be entered as 5 or
16049 <para>This will charge the patron on checkout</para>
16055 <para>If you would like a message or alert to appear when items of this type are
16056 checked in you can enter that in the 'Checkin message' box</para>
16058 <screeninfo>Checkin message setup</screeninfo>
16061 <imagedata fileref="images/admin/basicparams/itemtype-msgsetup.png"/>
16068 <para>The Checkin message type can be a Message or an Alert. The only
16069 difference between these two is the styling. By default a Message is blue </para>
16071 <screeninfo>Checkin Message</screeninfo>
16074 <imagedata fileref="images/admin/basicparams/itemtype-msg.png"/>
16078 <para>and an Alert is yellow.</para>
16080 <screeninfo>Checkin Alert</screeninfo>
16083 <imagedata fileref="images/admin/basicparams/itemtype-alert.png"/>
16092 <para>Some SIP devices need you to use a SIP-specific media type instead of Koha's
16093 item type (usually lockers and sorters need this media type), if you use a device
16094 like this you'll want to enter the SIP media type.</para>
16097 <para>When finished, click 'Save Changes'</para>
16101 <para>All fields, with the exception of the 'Item Type' will be editable from
16102 the Item Types list</para>
16109 <para>Your new item type will now appear on the list</para>
16112 <screeninfo>New DVD Item Type</screeninfo>
16116 <imagedata fileref="images/admin/basicparams/newitemtype.png"/>
16124 <section id="edititemtype">
16125 <title><link linkend="edititemtype">Editing Item Types</link></title>
16127 <para>Each item type has an Edit button beside it. To edit an item
16128 simply click the 'Edit' link.</para>
16131 <para>You will not be able to edit the code you assigned as the
16132 'Item Type' but you will be able to edit the description for the
16137 <section id="deleteitemtype">
16138 <title><link linkend="deleteitemtype">Deleting Item Types</link></title>
16140 <para>Each item has a Delete button beside it. To delete an item,
16141 simply click the 'Delete' link.</para>
16144 <para>You will not be able to delete item types that are being
16145 used by items within your system.</para>
16149 <screeninfo>Warning when you try to delete an item that is in
16154 <imagedata fileref="images/admin/basicparams/nodeleteitemtype.png"/>
16161 <section id="authorizedvalues">
16162 <title><link linkend="authorizedvalues">Authorized Values</link></title>
16164 <para>Authorized values can be used in several areas of Koha. One
16165 reason you would add an authorized value category would be to control
16166 the values that can be entered into MARC fields by catalogers.</para>
16170 <para><emphasis>Get there:</emphasis> More > Administration
16171 > Basic Parameters > Authorized Values</para>
16175 <section id="existingauthvalues">
16176 <title><link linkend="existingauthvalues">Existing Values</link></title>
16178 <para>Koha installs with pre-defined values that your library is
16179 likely to use, for instance 'Lost'.</para>
16182 <listitem id="asort1">
16183 <para>Asort1</para>
16186 <para>Used for acquisitions statistical purposes</para>
16191 <listitem id="asort2">
16192 <para>Asort2</para>
16195 <para>Used for acquisitions statistical purposes</para>
16200 <listitem id="bornotes">
16201 <para>BOR_NOTES</para>
16204 <para>Values for custom patron messages that appear on the circulation screen and
16205 the OPAC. The value in the Description field should be the message text and is
16206 limited to 200 characters.</para>
16208 <screeninfo>Borrower messages</screeninfo>
16211 <imagedata fileref="images/admin/basicparams/bor_notes.png"/>
16219 <listitem id="bsort1">
16220 <para>Bsort1</para>
16223 <para>Values that can be entered to fill in the patron's sort 1 field</para>
16228 <listitem id="bsort2">
16229 <para>Bsort2</para>
16232 <para>Values that can be entered to fill in the patron's sort 2 field</para>
16237 <listitem id="cartauth">
16241 <para>Is the shelving cart location, used by <link linkend="InProcessingToShelvingCart">InProcessingToShelvingCart</link> and
16242 <link linkend="ReturnToShelvingCart">ReturnToShelvingCart</link></para>
16247 <listitem id="ccode">
16251 <para>Collection codes (appears when cataloging and working with items)</para>
16256 <listitem id="damageauth">
16257 <para>DAMAGED</para>
16260 <para>Descriptions for items marked as damaged (appears when cataloging and
16261 working with items)</para>
16266 <listitem id="hingsas">
16267 <para>DEPARTMENT<itemizedlist>
16269 <para>Departments are required by and will be used in the <link linkend="coursereserves">Course Reserves</link> module</para>
16271 </itemizedlist></para>
16274 <para>HINGS_AS</para>
16277 <para>General Holdings: Acquisition Status Designator :: This data element
16278 specifies acquisition status for the unit at the time of the holdings
16284 <listitem id="hingsc">
16285 <para>HINGS_C</para>
16288 <para>General Holdings: Completeness Designator</para>
16293 <listitem id="hingspf">
16294 <para>HINGS_PF</para>
16297 <para>Physical Form Designators</para>
16302 <listitem id="hingsrd">
16303 <para>HINGS_RD</para>
16306 <para>General Holdings: Retention Designator :: This data element specifies the
16307 retention policy for the unit at the time of the holdings report.</para>
16312 <listitem id="hingsut">
16313 <para>HINGS_UT</para>
16316 <para>General Holdings: Type of Unit Designator</para>
16321 <listitem id="shelvelocvals">
16325 <para>Shelving location (usually appears when adding or editing an item)</para>
16330 <listitem id="lost">
16334 <para>Descriptions for the items marked as lost (appears when adding or editing an
16339 <para>Values given to lost statuses should be numeric and not alphabetical in
16340 order for statuses to appear properly</para>
16346 <listitem id="manualinvvals">
16347 <para>MANUAL_INV</para>
16350 <para>Values for manual invoicing types</para>
16355 <para>The value set as the Authorized Value for the MANUAL_INV authorized
16356 value category will appear as the Description and the Authorized Value
16357 Description will be used as the amount. Enter monetary amounts in the
16358 description without currency symbols.</para>
16365 <listitem id="notforloan">
16366 <para>NOT_LOAN</para>
16369 <para>Reasons why a title is not for loan</para>
16373 <para>Values given to lost statuses should be numeric and not alphabetical in
16374 order for statuses to appear properly</para>
16379 <para>Negative number values will still allow holds (use for on order statuses
16380 for example) where as positive numbers will not allow holds or
16387 <listitem id="procauth">
16388 <para>ORDER_CANCELLATION_REASON<itemizedlist>
16390 <para>Reasons why an order might have been cancelled</para>
16392 </itemizedlist></para>
16398 <para>The location to be used for <link linkend="NewItemsDefaultLocation">NewItemsDefaultLocation</link> (change description as desired), also the
16399 location expected by <link linkend="InProcessingToShelvingCart">InProcessingToShelvingCart</link>.</para>
16404 <listitem id="reportgroup">
16405 <para>REPORT_GROUP</para>
16408 <para>A way to sort and filter your reports, the default values in this category
16409 include the Koha modules (Accounts, Acquitisions, Catalog, Circulation,
16412 <screeninfo>Report Groups</screeninfo>
16415 <imagedata fileref="images/admin/basicparams/report_group.png"/>
16423 <listitem id="reportsubgroup">
16424 <para>REPORT_SUBGROUP</para>
16427 <para>Can be used to further sort and filter your reports. This category is empty
16428 by default. Values here need to include the authorized value code from
16429 REPORT_GROUP in the Description (OPAC) field to link the subgroup to the
16430 appropriate group.</para>
16432 <screeninfo>Report Subgroups</screeninfo>
16435 <imagedata fileref="images/admin/basicparams/report_subgroup.png"/>
16443 <listitem id="restricted">
16444 <para>RESTRICTED</para>
16447 <para>Restricted status of an item</para>
16452 <listitem id="suggestauthorized">
16453 <para>ROADTYPE<itemizedlist>
16455 <para>Road types to be used in patron addresses</para>
16457 </itemizedlist></para>
16460 <para>SIP_MEDIA_TYPE<itemizedlist>
16462 <para>Used when <link linkend="additemtype">creating</link> or <link linkend="edititemtype">editing</link> an item type to assign a SIP specific
16463 media type for devices like lockers and sorters.</para>
16465 </itemizedlist></para>
16468 <para>SUGGEST</para>
16471 <para>List of patron suggestion reject or accept reasons (appears when managing
16472 suggestions)</para>
16477 <listitem id="withdrawnauth">
16478 <para>WITHDRAWN</para>
16481 <para>Description of a withdrawn item (appears when adding or editing an
16487 <listitem id="yesnoauth">
16488 <para>YES_NO</para>
16491 <para>A generic authorized value field that can be used anywhere you need a simple
16492 yes/no pull down menu.</para>
16499 <section id="newauthvalcat">
16500 <title><link linkend="newauthvalcat">Add new Authorized Value Category</link></title>
16502 <para>In addition to the existing categories that come by default
16503 with Koha, librarians can add their own authorized value categories
16504 to control data that is entered into the system. To add a new
16509 <para>Click 'New Category'</para>
16512 <screeninfo>New Authorized Category form</screeninfo>
16516 <imagedata fileref="images/admin/basicparams/addauthcat.png"/>
16523 <para>Limit your Category to 10 characters (something short to
16524 make it clear what the category is for)</para>
16529 <para>Category cannot have spaces or special characters
16530 other than underscores and hyphens in it.</para>
16537 <para>When adding a new category you're asked to create at least
16538 one authorized value</para>
16542 <para>Enter a code for your Authorized Value into the
16543 'Authorized value' field</para>
16548 <para>Authorized value is limited to 80 characters and
16549 cannot have spaces or special characters other than
16550 underscores and hyphens in it.</para>
16557 <para>Use the Description field for the actual value that will be displayed. If
16558 you want something different to show in the OPAC, enter a 'Description
16562 <para>If you would like to limit this authorized value category to only specific
16563 libraries you can choose them from the 'Branches limitation' menu. To have it
16564 show for all libraries just choose 'All branches' at the top of the list.</para>
16568 <para>If you have <link linkend="StaffAuthorisedValueImages">StaffAuthorisedValueImages</link>
16569 and/or <link linkend="AuthorisedValueImages">AuthorisedValueImages</link>
16570 set to show images for authorized values you can choose the
16571 image under 'Choose an icon'</para>
16577 <para>Click 'Save'</para>
16581 <para>Your new category and value will appear on the list of
16582 Authorized Values</para>
16585 <screeninfo>Custom Authorized Value on list of
16586 values</screeninfo>
16590 <imagedata fileref="images/admin/basicparams/authvallist.png"/>
16598 <section id="newauthval">
16599 <title><link linkend="newauthval">Add new Authorized Value</link></title>
16601 <para>New authorized values can be added to any existing or new
16602 category. To add a value:</para>
16606 <para>Click 'New authorized value for ...'</para>
16609 <screeninfo>New Authorized Value form</screeninfo>
16613 <imagedata fileref="images/admin/basicparams/addauthvalue.png"/>
16620 <para>Enter a code for your Authorized Value into the
16621 'Authorized value' field</para>
16626 <para>Authorized value is limited to 80 characters and
16627 cannot have spaces or special characters other than
16628 underscores and hyphens in it.</para>
16635 <para>Use the Description field for the actual value that will be displayed. If you
16636 want something different to show in the OPAC, enter a 'Description (OPAC)'</para>
16639 <para>If you would like to limit this authorized value category to only specific
16640 libraries you can choose them from the 'Branches limitation' menu. To have it show
16641 for all libraries just choose 'All branches' at the top of the list.</para>
16645 <para>If you have <link linkend="StaffAuthorisedValueImages">StaffAuthorisedValueImages</link>
16646 and/or <link linkend="AuthorisedValueImages">AuthorisedValueImages</link> set
16647 to show images for authorized values you can choose the image
16648 under 'Choose an icon'</para>
16652 <para>Click 'Save'</para>
16656 <para>The new value will appear in the list along with existing
16660 <screeninfo>List of authorized values in MARC504
16661 category</screeninfo>
16665 <imagedata fileref="images/admin/basicparams/authvals.png"/>
16675 <section id="patscirc">
16676 <title><link linkend="patscirc">Patrons & Circulation</link></title>
16678 <para>Settings for controlling circulation and patron
16679 information.</para>
16681 <section id="patcats">
16682 <title><link linkend="patcats">Patron Categories</link></title>
16684 <para>Patron categories allow you to organize your patrons into
16685 different roles, age groups, and patron types.</para>
16689 <para><emphasis>Get there:</emphasis> More > Administration
16690 > Patrons & Circulation > Patron Categories</para>
16695 <screeninfo>Patron category list</screeninfo>
16699 <imagedata fileref="images/admin/patroncirc/patroncatlist.png"/>
16704 <para>Patrons are assigned to one of six main categories:</para>
16712 <para>Most common patron type, usually used for a general
16713 'Patron' category.</para>
16723 <para>Children patrons can have a guardian to be attached to
16734 <para>Librarians (and library workers) should be assigned the
16735 staff category so that you can <link linkend="patronpermissions">set their permissions</link> and
16736 give them access to the staff client.</para>
16742 <para>Organizational</para>
16746 <para>Organizational patrons are organizations. Organizations
16747 can be used as guarantors for Professional patrons.</para>
16753 <para>Professional</para>
16757 <para>Professional patrons can be linked to Organizational
16764 <para>Statistical</para>
16768 <para>This patron type is used strictly for statistical
16769 purposes, such as in house use of items.</para>
16775 <section id="addingpatroncat">
16776 <title><link linkend="addingpatroncat">Adding a patron category</link></title>
16778 <para>To add a new patron category click 'New Category' at the top
16782 <screeninfo>New patron category form</screeninfo>
16786 <imagedata fileref="images/admin/patroncirc/newpatroncat.png"/>
16793 <para>The 'Category Code' is an identifier for your new
16799 <para>The category code is limited to 10 characters
16800 (numbers and letters)</para>
16806 <para>This field is required in order to save your patron
16807 category. If left blank you will be presented with an
16811 <screeninfo>Missing fields error</screeninfo>
16815 <imagedata fileref="images/admin/patroncirc/patcaterror.png"/>
16825 <para>Enter a plain text version of the category in the
16826 'Description' field.</para>
16831 <para>This field is required in order to save your patron
16832 category. If left blank you will be presented with an
16836 <screeninfo>Missing fields error</screeninfo>
16840 <imagedata fileref="images/admin/patroncirc/patcaterror.png"/>
16850 <para>Enrollment period (in months) should be filled in if you
16851 have a limited enrollment period for your patrons (eg. Student
16852 cards expire after 9 months or until a specific date)</para>
16857 <para>You cannot enter both a month limit and a date
16858 until. Choose to enter either one or the other.</para>
16864 <para>This field is required in order to save your patron
16865 category. If left blank you will be presented with an
16869 <screeninfo>Missing fields error</screeninfo>
16873 <imagedata fileref="images/admin/patroncirc/patcaterror.png"/>
16883 <para>Some patron categories can have a minimum age (in years)
16884 requirement associated with them, enter this age in the 'Age
16890 <para>This value will only be checked if <link linkend="BorrowerMandatoryField">BorrowerMandatoryField</link>
16891 defines the dateofbirth as a required field on the patron
16899 <para>Patron categories can also have a maximum age (in years)
16900 associated with them (such as children), enter this age in the
16901 'Upperage limit'</para>
16906 <para>This value will only be checked if <link linkend="BorrowerMandatoryField">BorrowerMandatoryField</link>
16907 defines the dateofbirth as a required field on the patron
16915 <para>If you charge a membership fee for your patrons (such as
16916 those who live in another region) you can enter that in the
16917 'Enrollment fee' field.</para>
16922 <para>Only enter numbers and decimals in this field</para>
16926 <note><para>Depending on your value for the <link linkend="FeeOnChangePatronCategory">FeeOnChangePatronCategory</link> preference this fee will be charged on
16927 patron renewal as well as when they are first enrolled.</para></note>
16933 <para>If you want your patron to receive overdue notices, set
16934 the 'Overdue notice required' to 'Yes'</para>
16938 <para>You can decide on a patron category basis if lost items
16939 are shown in the staff client by making a choice from the 'Lost
16940 items in staff client' pull down</para>
16943 <screeninfo>Choose a value for 'Hide Lost Items'</screeninfo>
16947 <imagedata fileref="images/admin/patroncirc/hidelostitemspatron.png"/>
16955 <para>Note that this is only applicable in the staff
16956 client, so changing this value on patron categories who do
16957 not have access to the staff client won't make any
16965 <para>If you charge patrons for placing holds on items, enter
16966 the fee amount in the 'Hold fee' field.</para>
16971 <para>Only enter numbers and decimals in this field</para>
16978 <para>In the 'Category type' field choose one of the six main
16979 parent categories</para>
16982 <screeninfo>Six main patron categories</screeninfo>
16986 <imagedata fileref="images/admin/patroncirc/patroncatpulldown.png"/>
16994 <para>This field is required in order to save your patron
16995 category. If left blank you will be presented with an
16999 <screeninfo>Missing fields error</screeninfo>
17003 <imagedata fileref="images/admin/patroncirc/patcaterror.png"/>
17013 <para>The Branch Limitations let you limit this patron category to only some branches
17014 in your library system. Select 'All branches' if you would like any library to be
17015 able to use this category.</para>
17018 <para>You can decide if this patron category is blocked from performing actions in the
17019 OPAC if their card is expired using the next option. By default it will follow the
17020 rule set in the <link linkend="BlockExpiredPatronOpacActions">BlockExpiredPatronOpacActions</link> preference<screenshot>
17021 <screeninfo>Block expired patrons</screeninfo>
17024 <imagedata fileref="images/admin/patroncirc/blockexpired.png"/>
17027 </screenshot></para>
17030 <para>Next you can choose the default privacy settings for this patron category. This
17031 setting can be edited by the patron via the OPAC if you allow it with the <link linkend="OPACPrivacy">OPACPrivacy</link> system preference.<screenshot>
17032 <screeninfo>Default privacy</screeninfo>
17035 <imagedata fileref="images/admin/patroncirc/defaultprivacy.png"/>
17038 </screenshot></para>
17041 <para>Finally you can assign advanced messaging preferences by default to a patron
17047 <para>Requires that you have <link linkend="EnhancedMessagingPreferences">EnhancedMessagingPreferences</link> enabled</para>
17052 <para>These defaults will be applied to new patrons that are added to the system.
17053 They will not edit the preferences of the existing patrons. Also, these can be
17054 changed for individual patrons, this setting is just a default to make it easier
17055 to set up messages for an entire category.<itemizedlist>
17058 <para>After setting the default for the patron category you can force
17059 those changes to all existing patrons by running the <emphasis role="italic">borrowers-force-messaging-defaults</emphasis> script
17060 found in the <emphasis role="italic">misc/maintenance</emphasis> folder.
17061 Ask your system administrator for assistance with this script.</para>
17064 </itemizedlist></para>
17071 <section id="circfinerules">
17072 <title><link linkend="circfinerules">Circulation and Fine Rules</link></title>
17073 <para>These rules define how your items are circulated, how/when fines are calculated and
17074 how holds are handled.</para>
17077 <para><emphasis>Get there:</emphasis> More > Administration > Patrons &
17078 Circulation > Circulation and fines rules</para>
17081 <para>The rules are applied from most specific to less specific, using the first found in
17085 <para>same library, same patron type, same item type</para>
17088 <para>same library, same patron type, all item type</para>
17091 <para>same library, all patron types, same item type</para>
17094 <para>same library, all patron types, all item types</para>
17097 <para>default (all libraries), same patron type, same item type</para>
17100 <para>default (all libraries), same patron type, all item types</para>
17103 <para>default (all libraries), all patron types, same item type</para>
17106 <para>default (all libraries), all patron types, all item types</para>
17109 <para>The <link linkend="CircControl">CircControl</link> and <link linkend="HomeOrHoldingBranch">HomeOrHoldingBranch</link> also come in to play when
17110 figuring out which circulation rule to follow.<itemizedlist>
17112 <para>If CircControl is set to "the library you are logged in at" circ rules will be
17113 selected based on the library you are logged in at </para>
17116 <para>If CircControl is set to "the library the patron is from" circ rules will be
17117 selected based on the patron's library </para>
17120 <para>If CircControl is set to "the library the item is from" circ rules will be
17121 selected based on the item's library where HomeOrHoldingBranch chooses if item's
17122 home library is used or holding library is used.</para>
17125 <para>If <link linkend="IndependentBranches">IndependentBranches</link> is set to
17126 'Prevent' then the value of HomeOrHoldingBranch is used in figuring out if the item
17127 can be checked out. If the item's home library does not match the logged in library,
17128 the item cannot be checked out unless you are a <link linkend="patronpermsdefined">superlibrarian</link>.</para>
17130 </itemizedlist></para>
17132 <para>If you are a single library system choose your branch name before creating rules
17133 (sometimes having only rules for the 'all libraries' option can cause issues with
17138 <para>At the very least you will need to set a default circulation rule. This rule
17139 should be set for all item types, all libraries and all patron categories. That will
17140 catch all instances that do not match a specific rule. When checking out if you do not
17141 have a rule for all libraries, all item types and all patron types then you may see
17142 patrons getting blocked from placing holds. You will also want a rule for your
17143 specific library set for all item types and all patron types to avoid this holds
17144 issue. Koha needs to know what rule to fall back on.</para>
17147 <section id="defaultcircrules">
17148 <title><link linkend="defaultcircrules">Default Circulation Rules</link></title>
17149 <para>Using the issuing rules matrix you can define rules that depend on patron/item type
17150 combos. To set your rules, choose a library from the pull down (or 'all libraries' if
17151 you want to apply these rules to all branches):</para>
17153 <screeninfo>Libraries to apply the rules to</screeninfo>
17156 <imagedata fileref="images/admin/patroncirc/selectissuinglibrary.png"/>
17160 <para>From the matrix you can choose any combination of patron categories and item types
17161 to apply the rules to</para>
17163 <screeninfo>Setting issuing rules for your libraries</screeninfo>
17166 <imagedata fileref="images/admin/patroncirc/addcircrule.png"/>
17172 <para>First choose which patron category you'd like the rule to be applied to. If you
17173 leave this to 'All' it will apply to all patron categories</para>
17176 <para>Choose the 'Item type' you would like this rule to apply to. If you leave this
17177 to 'All' it will apply to all item types</para>
17180 <para>Limit the number of items a patron can have checked out at the same time by
17181 entering a number in the 'Current checkouts allowed' field</para>
17184 <para>If you're allowing <link linkend="OnSiteCheckouts">OnSiteCheckouts</link> then
17185 you may also want to set a limit on the number of items patron's can have onsite.<itemizedlist>
17188 <para>This setting also depends on the <link linkend="ConsiderOnSiteCheckoutsAsNormalCheckouts">ConsiderOnSiteCheckoutsAsNormalCheckouts</link> preference</para>
17191 </itemizedlist></para>
17194 <para>Define the period of time an item can be checked out to a patron by entering the
17195 number of units (days or hours) in the 'Loan period' box.</para>
17198 <para>Choose which unit of time, Days or Hours, that the loan period and fines will be
17199 calculated in in the 'Unit' column</para>
17202 <para>You can also define a hard due date for a specific patron category and item
17203 type. A hard due date ignores your usual circulation rules and makes it so that all
17204 items of the type defined are due on, before or after the date you specify.</para>
17207 <para>'Fine amount' should have the amount you would like to charge for overdue
17212 <para>Enter only numbers and decimal points (no currency symbols).</para>
17218 <para>Enter the 'Fine charging interval' in the unit you set (ex. charge fines every 1
17219 day, or every 2 hours)</para>
17222 <para>'When to charge' is most handy in libraries that have a fine charging interval
17223 of more than 1 day. <itemizedlist>
17225 <para>End of interval<itemizedlist>
17227 <para>Given a grace period of 2 days and a fine interval of 7 days, the
17228 first fine will appear 7 days after the due date, it will always take
17229 one fine interval (7 days), before the first fine is charged</para>
17231 </itemizedlist></para>
17234 <para>Start of interval<itemizedlist>
17236 <para>Given a grace period of 2 days and a fine interval of 7 days, the
17237 first fine will appear 2 days after the due date and the second fine 7
17238 days after the due date.</para>
17240 </itemizedlist></para>
17242 </itemizedlist></para>
17245 <para>The 'Fine grace period' is the period of time an item can be overdue before you
17246 start charging fines.</para>
17250 <para>This can only be set for the Day unit, not in Hours</para>
17256 <para>The 'Overdue fines cap' is the maximum fine for this patron and item
17261 <para>If this field is left blank then Koha will not put a limit on the fines
17262 this item will accrue. A maximum fine amount can be set using the <link linkend="MaxFine">MaxFine</link> system preference.</para>
17268 <para>If you would like to prevent overcharging patrons for a lost items, you can
17269 check the box under 'Cap fine at replacement price.' This will prevent the patron's
17270 fines from going above the replacement price on the item.<itemizedlist>
17273 <para>If the 'Overdue fines cap' is also set, the fine will be the lesser of
17274 the two, if both apply to the given overdue checkout.</para>
17277 </itemizedlist></para>
17280 <para>If your library 'fines' patrons by suspending their account you can enter the
17281 number of days their fine should be suspended in the 'Suspension in days'
17286 <para>This can only be set for the Day unit, not in Hours</para>
17292 <para>You can also define the maximum number of days a patron will be suspended in the
17293 'Max suspension duration' setting</para>
17296 <para>Next decide if the patron can renew this item type and if so, enter how many
17297 times they can renew it in the 'Renewals allowed' box</para>
17300 <para>If you're allowing renewals you can control how long the renewal loan period
17301 will be (in the units you have chosen) in the 'Renewal period' box</para>
17304 <para>If you're allowing renewals you can control how soon before the due date patrons
17305 can renew their materials with the 'No renewals before' box.<itemizedlist>
17307 <para>Items can be renewed at any time if this value is left blank. Otherwise
17308 items can only be renewed if the item is due after the number in units
17309 (days/hours) entered in this box.</para>
17312 <para>To control this value on a more granular level please set the <link
17313 linkend="NoRenewalBeforePrecision">NoRenewalBeforePrecision</link>
17316 </itemizedlist></para>
17319 <para>You can enable automatic renewals for certain items/patrons if you'd like. This
17320 will renew automatically following your circulation rules unless there is a hold on
17321 the item<itemizedlist>
17324 <para>You will need to enable the <link linkend="autorenewcron">automatic
17325 renewal cron job</link> for this to work.</para>
17330 <para>This feature needs to have the "no renewal before" column filled in or
17331 it will auto renew everyday after the due date </para>
17334 </itemizedlist></para>
17337 <para>If the patron can place holds on this item type, enter the total numbers of
17338 items (of this type) that can be put on hold in the 'Holds allowed' field</para>
17341 <para>Next you can decide if this patron/item combo are allowed to place holds on
17342 items that are on the shelf (or available in the library) or not. If you choose 'no'
17343 then items can only be placed on hold if checked out</para>
17346 <para>You can also decide if patrons are allowed to place item specific holds on the
17347 item type in question. The options are:<itemizedlist>
17349 <para>Allow: Will allow patrons the option to choose next available or item
17353 <para>Don't allow: Will only allow patrons to choose next available</para>
17356 <para>Force: Will only allow patrons to choose an specific item</para>
17358 </itemizedlist></para>
17361 <para>Finally, if you charge a <link linkend="rentalcharge">rental fee</link> for the
17362 item type and want to give a specific patron type a discount on that fee, enter the
17363 percentage discount (without the % symbol) in the 'Rental Discount' field</para>
17366 <para>When finished, click 'Add' to save your changes. To modify a rule, simply click the
17367 'Edit' link to the right of the fule and edit the values that appear filled in at the
17368 bottom of the form.</para>
17370 <screeninfo>Edit circ and fine rule</screeninfo>
17373 <imagedata fileref="images/admin/patroncirc/editcircfine.png"/>
17377 <para>If you would like to delete your rule, click the 'Delete' link to the right of the
17379 <para>To save time you can clone rules from one library to another by choosing the clone
17380 option above the rules matrix.</para>
17382 <screeninfo>Circulation & Fine Rules Clone Tool</screeninfo>
17385 <imagedata fileref="images/admin/patroncirc/clonerules.png"/>
17389 <para>After choosing to clone you will be presented with a confirmation message.</para>
17391 <screeninfo>Circulation & Fine Rules Successfully Cloned Message</screeninfo>
17394 <imagedata fileref="images/admin/patroncirc/rulescloned.png"/>
17399 <section id="defaultcheckoutpolicy">
17400 <title><link linkend="defaultcheckoutpolicy">Default Checkouts and Hold Policy</link></title>
17401 <para>You can set a default maximum number of checkouts and hold policy that will be used
17402 if none is defined below for a particular item type or category. This is the fall back
17403 rule for defaults.</para>
17405 <screeninfo>Default Checkouts and Hold Policy</screeninfo>
17408 <imagedata fileref="images/admin/patroncirc/defaultcheckholds.png"/>
17412 <para>From this menu you can set a default to apply to all item types and patrons in the
17413 library if no other option is set in the forms below.</para>
17416 <para>In 'Total current checkouts allowed' enter the total number of items patrons can
17417 have checked out at one time</para>
17420 <para>In 'Total current on-site checkouts allowed' enter the total number of items
17421 patrons can have checked out on site at a time (<link linkend="OnSiteCheckouts">OnSiteCheckouts</link> needs to be set to 'Enable')</para>
17424 <para>Control where patrons can place holds from using the 'Hold Policy' menu</para>
17427 <para>From Any Library: Patrons from any library may put this item on hold.
17428 (default if none is defined)</para>
17431 <para>From Home Library: Only patrons from the item's home library may put this
17432 book on hold.</para>
17435 <para>No Holds Allowed: No patron may put this book on hold.</para>
17440 <para>Control if there is a limit to filling a hold based on the item's library<itemizedlist>
17442 <para>any library</para>
17445 <para>item's home library</para>
17448 <para>item's holding library</para>
17452 <para>The patron's home library should not affect whether a patron can place
17453 the hold, instead the hold will only be fillable when an item matching the
17454 pickup location becomes available.</para>
17457 </itemizedlist></para>
17460 <para>Control where the item returns to once it is checked in</para>
17463 <para>Item returns home</para>
17466 <para>Item returns to issuing branch</para>
17469 <para>Item floats</para>
17472 <para>When an item floats it stays where it was checked in and does not ever
17473 return 'home'</para>
17480 <para>Once your policy is set, you can unset it by clicking the 'Unset' link to the
17481 right of the rule</para>
17485 <section id="checkoutperpatron">
17486 <title><link linkend="checkoutperpatron">Checkouts Per Patron</link></title>
17487 <para>For this library, you can specify the maximum number of loans that a patron of a
17488 given category can make, regardless of the item type. </para>
17490 <screeninfo>Set default checkouts per patron category</screeninfo>
17493 <imagedata fileref="images/admin/patroncirc/checkoutsperpatron.png"/>
17498 <para>If the total amount loanable for a given patron category is left blank, no limit
17499 applies, except possibly for a limit you define for a specific item type.</para>
17501 <para>For example, if you have a rule in the matrix that says Board patrons are allowed 10
17502 books and 5 DVDs but you want to make it so that Board patrons only have a total of 12
17503 things checked out at once. If you enter 12 here and the patron has 10 books out
17504 already they will only be allowed 2 DVDs to equal the 12 total they're allowed.</para>
17506 <section id="holdpolicies">
17507 <title><link linkend="holdpolicies">Item Hold Policies</link></title>
17508 <para>For this library, you can edit hold and return policies for a given item type,
17509 regardless of the patron's category.</para>
17511 <screeninfo>Hold policies per item type</screeninfo>
17514 <imagedata fileref="images/admin/patroncirc/holdsperitem.png"/>
17518 <para>The various Hold Policies have the following effects:</para>
17521 <para>From Any Library: Patrons from any library may put this item on hold. (default
17522 if none is defined)</para>
17525 <para>From Home Library: Only patrons from the item's home library may put this book
17529 <para>No Holds Allowed: No patron may put this book on hold.</para>
17533 <para>Note that if the system preference <link linkend="AllowHoldPolicyOverride">AllowHoldPolicyOverride</link> set to 'allow', these policies can be overridden by
17534 your circulation staff.</para>
17537 <para>These policies are based on the patron's home branch, not the branch that the
17538 reserving staff member is from.</para>
17540 <para>Control if there is a limit to filling a hold based on the item's library<itemizedlist>
17542 <para>any library</para>
17545 <para>item's home library</para>
17548 <para>item's holding library</para>
17552 <para>The patron's home library should not affect whether a patron can place
17553 the hold, instead the hold will only be fillable when an item matching the
17554 pickup location becomes available.</para>
17557 </itemizedlist></para>
17559 <para>The various Return Policies have the following effects:</para>
17562 <para>Item returns home: The item will prompt the librarian to transfer the item to
17563 its home library</para>
17567 <para>If the <link linkend="AutomaticItemReturn">AutomaticItemReturn</link>
17568 preference is set to automatically transfer the items home, then a prompt will
17575 <para>Item returns to issuing branch: The item will prompt the librarian to transfer
17576 the item back to the library where it was checked out</para>
17580 <para>If the <link linkend="AutomaticItemReturn">AutomaticItemReturn</link>
17581 preference is set to automatically transfer the items home, then a prompt will
17588 <para>Item floats: The item will not be transferred from the branch it was checked in
17589 at, instead it will remain there until transferred manually or checked in at another
17593 <para>For example you might allow holds at your libraries but not what New items or DVDs to
17594 be placed on hold by other branches so you can set the 'Hold policy' to 'From home
17595 library' so that those items can only be placed on hold if the items' owning library and
17596 the patron's home library are the same. You can also block holds completely on specific
17597 item types from this form. This is also how you can set up floating item types and
17598 types that remain with their home library.</para>
17601 <section id="patronattributetypes">
17602 <title><link linkend="patronattributetypes">Patron Attribute Types</link></title>
17603 <para>Patron attributes can be used to define custom fields to associate with your patron
17604 records. In order to enable the use of custom fields you need to set the <link linkend="ExtendedPatronAttributes">ExtendedPatronAttributes</link> system
17608 <para><emphasis>Get there:</emphasis> More > Administration > Patrons &
17609 Circulation > Patron attribute types</para>
17612 <para>A common use for this field would be for a student ID number or a Driver's license
17615 <screeninfo>List of Patron Attributes</screeninfo>
17618 <imagedata fileref="images/admin/patroncirc/attributes.png"/>
17622 <section id="addpatattributes">
17623 <title><link linkend="addpatattributes">Adding Patron Attributes</link></title>
17624 <para>To add a new Patron Attribute Type, click the 'New Patron Attribute Type' button at
17625 the top of the page</para>
17627 <screeninfo>Add Patron Attribute Type form</screeninfo>
17630 <imagedata fileref="images/admin/patroncirc/addattribute.png"/>
17636 <para>In the 'Patron attribute type code', enter a short code to identify this
17641 <para>This field is limited to 10 characters (numbers and letters only)</para>
17646 <para>This setting cannot be changed after an attribute is defined</para>
17652 <para>In the 'Description' field, enter a longer (plain text) explanation of what this
17653 field will contain</para>
17656 <para>Check the box next to 'Repeatable' to let a patron record have multiple values
17657 of this attribute.</para>
17661 <para>This setting cannot be changed after an attribute is defined</para>
17667 <para>If 'Unique identifier' is checked, the attribute will be a unique identifier
17668 which means, if a value is given to a patron record, the same value cannot be given
17669 to a different record.</para>
17672 <para>Unique attributes can be used as match points on the <link linkend="patronimport">patron import tool</link></para>
17676 <para>This setting cannot be changed after an attribute is defined</para>
17682 <para>Check 'Allow password' to make it possible to associate a password with this
17686 <para>Check 'Display in OPAC' to display this attribute on a patron's details page in
17690 <para>Check 'Searchable' to make this attribute searchable in the staff patron
17694 <para>Check 'Display in check-out' to make this attribute visible in the patron's
17695 short detail display on the left of the checkout screen and other patron
17698 <screeninfo>Show attribute in patron detail on the left</screeninfo>
17701 <imagedata fileref="images/admin/patroncirc/showattribute.png"/>
17707 <para>Authorized value category; if one is selected, the patron record input page will
17708 only allow values to be chosen from the authorized value list.</para>
17711 <para>You will first need to add an authorized value list for it to appear in this
17715 <para><emphasis>Get there: </emphasis>More > Administration > Basic
17716 Parameters > <link linkend="authorizedvalues">Authorized
17717 Values</link></para>
17723 <para>an authorized value list is not enforced during batch patron
17730 <para>If you would like this attribute to only be used by specific branches you can
17731 choose those branches from the 'Branches limitation' list. Choose 'All branches' to
17732 show it for all libraries.<itemizedlist>
17735 <para>Note that items with locations already set on them will not be altered.
17736 The branch limitation only limits the choosing of an authorized value based
17737 on the home branch of the current staff login. All authorized values for
17738 item records (LOC, LOST, CCODE, etc) will show in the OPAC for all
17742 </itemizedlist></para>
17745 <para>If you'd like to only show this attribute on patrons of one type choose that
17746 patron type from the 'Category' pull down</para>
17749 <para>If you have a lot of attributes it might be handy to group them so that you can
17750 easily find them for editing. If you create an <link linkend="authorizedvalues">Authorized Value</link> for PA_CLASS it will show in the 'Class' pull down and
17751 you can then change your attributes page to have sections of attributes</para>
17753 <screeninfo>Patron Attributes Sorted</screeninfo>
17756 <imagedata fileref="images/admin/patroncirc/pa_class.png"/>
17762 <para>Click Save to save your new attribute</para>
17765 <para>Once added your attribute will appear on the list of attributes and also on the
17766 patron record add/edit form</para>
17768 <screeninfo>Patron Attributes list on the Patron add/edit form</screeninfo>
17771 <imagedata fileref="images/admin/patroncirc/patronattribute.png"/>
17775 <para>If you have set up classes for organizing attributes they will appear that way on
17776 the add/edit patron form</para>
17778 <screeninfo>Grouped Attributes</screeninfo>
17781 <imagedata fileref="images/admin/patroncirc/pa_class-patron.png"/>
17786 <section id="editpatattributes">
17787 <title><link linkend="editpatattributes">Editing/Deleting Patron Attributes</link></title>
17788 <para>Each patron attribute has an edit and a delete link beside it on the list of
17790 <para>Some fields in the attribute will not be editable once created:</para>
17793 <para>Patron attribute type code</para>
17796 <para>Repeatable</para>
17799 <para>Unique identifier</para>
17802 <para>You will be unable to delete an attribute if it's in use.</para>
17804 <screeninfo>Warning when trying to delete an attribute that is in use</screeninfo>
17807 <imagedata fileref="images/admin/patroncirc/deletepatronattr.png"/>
17813 <section id="libtransferlimits">
17814 <title><link linkend="libtransferlimits">Library Transfer Limits</link></title>
17815 <para>Limit the ability to transfer items between libraries based on the library sending,
17816 the library receiving, and the collection code involved.</para>
17819 <para><emphasis>Get there:</emphasis> More > Administration > Patrons &
17820 Circulation > Library Transfer Limits</para>
17823 <para>These rules only go into effect if the preference <link linkend="UseBranchTransferLimits">UseBranchTransferLimits</link> is set to
17825 <para>Before you begin you will want to choose which library you are setting these limits
17828 <screeninfo>Choose the library you're setting limits for</screeninfo>
17831 <imagedata fileref="images/admin/patroncirc/librarytransferselect.png"/>
17835 <para>Transfer limits are set based on the collections codes you have applied via the <link linkend="authorizedvalues">Authorized Value</link> administration area.</para>
17837 <screeninfo>Collection Code values assigned in the Authorized Value area</screeninfo>
17840 <imagedata fileref="images/admin/patroncirc/collectcodes.png"/>
17844 <para>Collection codes will appear as tabs above the checkboxes:</para>
17846 <screeninfo>Collection Code tabs</screeninfo>
17849 <imagedata fileref="images/admin/patroncirc/limittocollcode.png"/>
17853 <para>Check the boxes for the libraries that you accept checkins from for the item type you
17854 have selected at the top (in the example below - FIC)</para>
17856 <screeninfo>Example transfer limits set up</screeninfo>
17859 <imagedata fileref="images/admin/patroncirc/transferlimits.png"/>
17863 <para>In the above example, Centerville library will allow patrons to return items from all
17864 libraries except Liberty and Franklin to their branch.</para>
17866 <section id="transportcostmatrix">
17867 <title><link linkend="transportcostmatrix">Transport cost matrix</link></title>
17868 <para>The Transport cost matrix lets a library system define relative costs to transport
17869 books to one another. In order for the system to use this matrix you must first set the
17870 <link linkend="UseTransportCostMatrix">UseTransportCostMatrix</link> preference to
17872 <para>The Transport cost matrix takes precedence in controlling where holds are filled
17873 from, if the matrix is not used then Koha checks the <link linkend="holdqueueweight">StaticHoldsQueueWeight</link>.</para>
17874 </important></para>
17875 <para>Costs are decimal values between some arbitrary maximum value (e.g. 1 or 100) and 0
17876 which is the minimum (no) cost. For example, you could just use the distance between each
17877 library in miles as your 'cost', if that would accurately reflect the cost of transferring
17878 them. Perhaps post offices would be a better measure. Libraries sharing a post office
17879 would have a cost of 1, adjacent post offices would have a cost of 2, etc.</para>
17880 <para>To enter transport costs simply click in the cell you would like to alter, uncheck the
17881 'Disable' box and enter your 'cost'</para>
17883 <screeninfo>Transport cost matrix</screeninfo>
17886 <imagedata fileref="images/admin/patroncirc/transportcostmatrix.png"/>
17890 <para>After entering in your cost, hit 'Enter' on your keyboard or click the 'Save' button
17891 at the bottom of the matrix to save your changes.</para>
17894 <para>A NULL value will make no difference where the From and To libraries are the same
17895 library. However, as a best practice, you should put a 0 in there. For all other
17896 To/From combinations, a NULL value will cause that relationship to act as if it has
17897 been disabled. So, in summary, don't leave any of the values empty. It's best to
17898 always put a number in there ( even if you choose to disable that given To/From option
17903 <section id="itemcircalerts">
17904 <title><link linkend="itemcircalerts">Item Circulation Alerts</link></title>
17905 <para>Libraries can decide if they want to have patrons automatically notified of
17906 circulation events (check ins and check outs).</para>
17909 <para><emphasis>Get there:</emphasis> More > Administration > Patrons &
17910 Circulation > Item Circulation Alerts</para>
17913 <para>These preferences are set based on patron types and item types.</para>
17915 <para>These preference can be overridden by changes in the individual patron's messaging
17916 preferences.</para>
17918 <para>To set up circulation alerts:</para>
17921 <para>Choose your library from the pull down at the top of the screen</para>
17923 <screeninfo>Libraries to set Circulation Alerts</screeninfo>
17926 <imagedata fileref="images/admin/patroncirc/librariesforalert.png"/>
17932 <para>To set preferences for all libraries, keep the menu set to 'Default'</para>
17937 <para>By default all item types and all patrons are notified of check ins and check
17938 outs. To change this, click on the item/patron type combo that you would like to stop
17939 notices for.</para>
17941 <screeninfo>Circulation Alert Matrix</screeninfo>
17944 <imagedata fileref="images/admin/patroncirc/alertmatrix.png"/>
17950 <para>In the above example, Juveniles and Kids will not receive check out
17958 <section id="citytowns">
17959 <title><link linkend="citytowns">Cities and Towns</link></title>
17961 <para>To standardize patron input you can define cities or towns
17962 within your region so that when new patrons are added librarians
17963 simply have to select the town from a list instead of having to type
17964 the town and zip (or postal) code information.</para>
17968 <para><emphasis>Get there:</emphasis> More > Administration
17969 > Patrons & Circulation > Cities and Towns</para>
17973 <section id="addingcity">
17974 <title><link linkend="addingcity">Adding a City</link></title>
17976 <para>To add a new city, click the 'New City' button at the top of
17977 the page and enter the city name, state, zip/postal code and
17981 <screeninfo>New city entry form</screeninfo>
17985 <imagedata fileref="images/admin/patroncirc/newcity.png"/>
17990 <para>One you click Submit, your city will be saved and will be
17991 listed on the Cities and Towns page</para>
17994 <screeninfo>List of Cities</screeninfo>
17998 <imagedata fileref="images/admin/patroncirc/cities.png"/>
18003 <para>Cities can be edited or deleted at any time.</para>
18006 <section id="citiesonpatform">
18007 <title><link linkend="citiesonpatform">Viewing Cities on Patron Add Form</link></title>
18009 <para>If you have defined local cities using the New city form, then
18010 when adding or editing a patron record you will see those cities in
18011 a pull down menu to make city selection easy.</para>
18014 <screeninfo>Cities pull down on the patron record</screeninfo>
18018 <imagedata fileref="images/admin/patroncirc/patroncity.png"/>
18023 <para>This will allow for easy entry of local cities into the patron
18024 record without risking the potential for typos or mistaken
18025 zip/postal codes.</para>
18030 <section id="catadmin">
18031 <title><link linkend="catadmin">Catalog Administration</link></title>
18033 <para>Set these controls before you start cataloging on your Koha
18038 <para><emphasis>Get there:</emphasis> More > Administration >
18043 <section id="marcbibframeworks">
18044 <title><link linkend="marcbibframeworks">MARC Bibliographic Frameworks</link></title>
18046 <para>Think of Frameworks as templates for creating new bibliographic
18047 records. Koha comes with some predefined frameworks that can be edited
18048 or deleted, and librarians can create their own frameworks for content
18049 specific to their libraries.</para>
18053 <para><emphasis>Get there:</emphasis> More > Administration
18054 > Catalog > MARC Bibliographic Frameworks</para>
18059 <screeninfo>Frameworks List</screeninfo>
18063 <imagedata fileref="images/admin/cataloging/frameworks.png"/>
18069 <para>Do not delete or edit the Default Framework since this will
18070 cause problems with your cataloging records - always create a new
18071 template based on the Default Framework, or alter the other
18075 <para>After clicking the 'MARC structure' link to the right of each
18076 framework you can decide how many fields you want to see on one screen
18077 by using the pagination options at the top of the table.</para>
18080 <screeninfo>Pagination options</screeninfo>
18084 <imagedata fileref="images/admin/cataloging/frameworkoptions.png"/>
18089 <section id="addframework">
18090 <title><link linkend="addframework">Add New Framework</link></title>
18092 <para>To add a new framework</para>
18096 <para>Click 'New Framework'</para>
18099 <screeninfo>Add Framework Form</screeninfo>
18103 <imagedata fileref="images/admin/cataloging/addframework.png"/>
18110 <para>Enter a code of 4 or fewer characters</para>
18114 <para>Use the Description field to enter a more detailed
18115 definition of your framework</para>
18121 <para>Click 'Submit'</para>
18125 <para>Once your Framework is added click 'MARC structure' to the
18126 right of it on the list of Frameworks</para>
18129 <screeninfo>Choose basis for new Framework</screeninfo>
18133 <imagedata fileref="images/admin/cataloging/startnewframework.png"/>
18140 <para>You will be asked to choose a Framework to base your
18141 new Framework off of, this will make it easier than starting
18142 from scratch</para>
18148 <para>Once your Framework appears on the screen you can edit or
18149 delete each field by following the instructions for <link linkend="editsubfields">editing subfields</link></para>
18154 <section id="editframeworks">
18155 <title><link linkend="editframeworks">Edit Existing Frameworks</link></title>
18157 <para>Clicking 'Edit' to the right of a Framework will only allow
18158 you to edit the Description for the Framework:</para>
18161 <screeninfo>Edit Framework</screeninfo>
18165 <imagedata fileref="images/admin/cataloging/editframework.png"/>
18170 <para>To make edits to the fields associated with the Framework you
18171 must first click 'MARC Structure' and then follow the instructions
18172 for <link linkend="editsubfields">editing subfields</link></para>
18175 <section id="addsubfieldsframework">
18176 <title><link linkend="addsubfieldsframework">Add subfields to Frameworks</link></title>
18178 <para>To add a field to a Framework click the 'New Tag' button at
18179 the top of the Framework definition</para>
18182 <screeninfo>New Tag Button</screeninfo>
18186 <imagedata fileref="images/admin/cataloging/newtag.png"/>
18191 <para>This will open up a blank form for entering MARC field
18195 <screeninfo>Add a new tag to framework</screeninfo>
18199 <imagedata fileref="images/admin/cataloging/newtagform.png"/>
18204 <para>Enter the information about your new tag:</para>
18208 <para>The 'Tag' is the MARC field number</para>
18212 <para>The 'Label for lib' is the text that will appear in the
18213 staff client when in the cataloging module</para>
18217 <para>The 'Label for OPAC' is the text that will appear in the
18218 OPAC when viewing the MARC version of the record</para>
18222 <para>If this field can be repeated, check the 'Repeatable'
18227 <para>If this field is mandatory, check the 'Mandatory'
18232 <para>If you want this field to be a pull down with limited
18233 possible answers, choose which 'Authorized value' list you want
18238 <para>When you're finished, click 'Save Changes' and you will be
18239 presented with your new field</para>
18242 <screeninfo>New tag and link to subfields</screeninfo>
18246 <imagedata fileref="images/admin/cataloging/subfieldslink.png"/>
18251 <para>To the right of the new field is a link to 'Subfields,' you
18252 will need to add subfields before this tag will appear in your MARC
18253 editor. The process of entering the settings for the new subfield is
18254 the same as those found in the <link linkend="editsubfields">editing
18255 subfields in frameworks</link> section of this manual.</para>
18258 <section id="editsubfields">
18259 <title><link linkend="editsubfields">Edit Framework Subfields</link></title>
18261 <para>Frameworks are made up of MARC fields and subfields. To make
18262 edits to most Frameworks you must edit the fields and subfields.
18263 Clicking 'Edit' to the right of each subfield will allow you to make
18264 changes to the text associated with the field</para>
18267 <screeninfo>Modify MARC Field</screeninfo>
18271 <imagedata fileref="images/admin/cataloging/editfield.png"/>
18278 <para>Each field has a tag (which is the MARC tag) that is uneditable</para>
18282 <para>The 'Label for lib' is what will show in the staff
18283 client if you have <link linkend="advancedMARCeditor">advancedMARCeditor</link> set
18284 to display labels</para>
18288 <para>The 'Label for OPAC' is what will show on the MARC
18289 view in the OPAC</para>
18293 <para>If you check 'Repeatable' then the field will have a
18294 plus sign next to it allowing you to add multiples of that
18299 <para>If you check 'Mandatory' the record will not be
18300 allowed to save unless you have a value assigned to this
18305 <para>'Authorized value' is where you define an <link linkend="authorizedvalues">authorized value</link> that your
18306 catalogers can choose from a pull down to fill this field
18313 <para>To edit the subfields associated with the tag, click
18314 'Subfields' to the right of the tag on the 'MARC Structure'
18319 <para>From the list of subfields you can click 'Delete' to the
18320 right of each to delete the subfields</para>
18324 <para>To edit the subfields click 'Edit Subfields'</para>
18328 <para>For each subfield you can set the following Basic constraint values</para>
18330 <screeninfo>Editing the 504 Subfield</screeninfo>
18333 <imagedata fileref="images/admin/cataloging/editsubfield.png"/>
18340 <para>Text for librarian</para>
18344 <para>what appears before the subfield in the librarian
18351 <para>Text for OPAC</para>
18355 <para>what appears before the field in the OPAC.</para>
18359 <para>If left empty, the text for librarian is used
18368 <para>Repeatable</para>
18372 <para>the field will have a plus sign next to it
18373 allowing you to add multiples of that tag</para>
18379 <para>Mandatory</para>
18383 <para>the record will not be allowed to save unless you
18384 have a value assigned to this tag</para>
18390 <para>Managed in tab</para>
18394 <para>defines the tab where the subfield is shown. All
18395 subfields of a given field must be in the same tab or
18396 ignored. Ignore means that the subfield is not
18404 <para>For each subfield you can set the following Advanced constraint values</para>
18406 <screeninfo>Advanced constraints</screeninfo>
18409 <imagedata fileref="images/admin/cataloging/advancedoptsubfield.png"/>
18415 <para>Default value</para>
18418 <para>defines what you want to appear in the field by default, this will be
18419 editable, but it saves time if you use the same note over and over or the
18420 same value in a field often.</para>
18424 <para>If you would like a field to fill in with today's date you can use the
18425 YYYY MM DD syntax in the 'Default value'. For example: a default of
18426 "Year:YYYY Month:MM Day:DD" (without quotes) will print as "Year:2015
18427 Month:11 Day:30"</para>
18433 <para>Visibility</para>
18436 <para>allows you to select from where this subfield is visible/hidden, simply
18437 check the boxes where you would like the field to show and uncheck the boxes
18438 where you would like it hidden.</para>
18440 <screeninfo>Framework visibility</screeninfo>
18443 <imagedata fileref="images/admin/cataloging/frameworkvisibility.png"/>
18451 <para>Is a URL</para>
18454 <para>if checked, it means that the subfield is a URL and can be
18463 <para>If you enter a field/subfield here (200b), a link appears after the
18464 subfield in the MARC Detail view. This view is present only in the staff
18465 client, not the OPAC. If the librarian clicks on the link, a search is done
18466 on the database for the field/subfield with the same value. This can be used
18467 for 2 main topics :</para>
18470 <para>on a field like author (200f in UNIMARC), put 200f here, you will be
18471 able to see all bib records with the same author.</para>
18474 <para>on a field that is a link (4xx) to reach another bib record. For
18475 example, put 011a in 464$x, will find the serials that are with this
18482 <para>This value should not change after data has been added to your
18483 catalog. If you need to change this value you must ask your system
18484 administrator to run misc/batchRebuildBiblioTables.pl. </para>
18490 <para>Koha link</para>
18493 <para>Koha is multi-MARC compliant. So, it does not know what the 245$a means,
18494 neither what 200$f (those 2 fields being both the title in MARC21 and
18495 UNIMARC). So, in this list you can "map" a MARC subfield to its meaning.
18496 Koha constantly maintains consistency between a subfield and its meaning.
18497 When the user want to search on "title", this link is used to find what is
18498 searched (245 if you're MARC21, 200 if you're UNIMARC).</para>
18505 <para>For each subfield you can set the following Other option values</para>
18510 <imagedata fileref="images/admin/cataloging/otheroptssubfield.png"/>
18516 <para>Authorized value</para>
18519 <para>means the value cannot by typed by the librarian, but must be chosen
18520 from a pull down generated by the <link linkend="authorizedvalues">authorized value</link> list</para>
18523 <para>In the example above, the 504a field will show the MARC504 Authorized
18524 Values when cataloging</para>
18526 <screeninfo>Example of an Authorized Subfield</screeninfo>
18529 <imagedata fileref="images/admin/cataloging/504auth.png"/>
18537 <para>Thesaurus</para>
18540 <para>means that the value is not free text, but must be searched in the
18541 authority/thesaurus of the selected category</para>
18546 <para>Plugin</para>
18549 <para>means the value is calculated or managed by a plugin. Plugins can do
18550 almost anything.</para>
18553 <para>Examples:<itemizedlist>
18554 <listitem id="cnbrowseplugin">
18555 <para>For call numbers there is an option to add a call number browser
18556 next to the the call number subfield so that you can identify which
18557 call numbers are in use and which are not. Simply choose the
18558 cn_browser.pl plugin. Learn more in the <link linkend="addingitems">cataloging section</link> of this manual.</para>
18561 <para>If you'd like to let file uploads via cataloging you can choose
18562 the upload.pl plugin and this will allow you to <link linkend="uploadbibfile">upload files to Koha to link to your
18563 records</link>.</para>
18566 <para>In UNIMARC there are plugins for every 1xx fields that are coded
18567 fields. The plugin is a huge help for cataloger! There are also two
18568 plugins (unimarc_plugin_210c and unimarc_plugin_225a that can
18569 "magically" find the editor from an ISBN, and the collection list for
18572 </itemizedlist></para>
18580 <para>To save your changes simply click the 'Save Changes'
18581 button at the top of the screen</para>
18588 <section id="importexportframeworks">
18589 <title><link linkend="importexportframeworks">Import/Export Frameworks</link></title>
18591 <para>Next to each framework is a link to either import or export
18592 the framework.</para>
18594 <section id="exportframeworks">
18595 <title><link linkend="exportframeworks">Export Framework</link></title>
18597 <para>To export a framework simply click the 'Export' link to the
18598 right of framework title.</para>
18601 <screeninfo>Export link next to framework</screeninfo>
18605 <imagedata fileref="images/admin/cataloging/importexport.png"/>
18610 <para>When you click 'Export' you will be prompted to choose what
18611 format to export the file in.</para>
18614 <screeninfo>Export formats</screeninfo>
18618 <imagedata fileref="images/admin/cataloging/exportoptions.png"/>
18623 <para>A framework exported this way can be imported into any other
18624 Koha installation using the import framework option.</para>
18627 <section id="importframeworks">
18628 <title><link linkend="importframeworks">Import Framework</link></title>
18630 <para>An easy way to create a new framework is to import one created for your or another
18631 Koha installation. This framework would need to be exported from the other system
18632 <link linkend="exportframeworks">using the instructions above</link> to be available
18633 for import here. </para>
18634 <para>To import a framework you first need to create <link linkend="addframework">a new
18635 framework</link>. Once you have that framework, click 'Import' to the right of the
18636 new framework.</para>
18639 <screeninfo>Import link next to framework</screeninfo>
18643 <imagedata fileref="images/admin/cataloging/importexport.png"/>
18648 <para>You will be prompted to find a file on your computer to
18649 import into the framework.</para>
18652 <screeninfo>Choose a file to import</screeninfo>
18656 <imagedata fileref="images/admin/cataloging/importfile.png"/>
18661 <para>You will be asked to confirm your actions before the file is
18665 <screeninfo>Confirm your desire to import</screeninfo>
18669 <imagedata fileref="images/admin/cataloging/importconfirm.png"/>
18674 <para>As your file is uploaded you will see an image that will
18675 confirm that the system is working.</para>
18678 <screeninfo>Import timer</screeninfo>
18682 <imagedata fileref="images/admin/cataloging/importtimer.png"/>
18687 <para>Once your import is complete you will be brought to the
18688 framework edit tool where you can make any changes you need to the
18689 framework you imported.</para>
18694 <section id="kohamarcmapping">
18695 <title><link linkend="kohamarcmapping">Koha to MARC Mapping</link></title>
18697 <para>While Koha stores the entire MARC record, it also stores common
18698 fields for easy access in various tables in the database. Koha to MARC
18699 Mapping is used to tell Koha where to find these values in the MARC
18700 record. In many cases you will not have to change the default values
18701 set by in this tool on installation, but it is important to know that
18702 the tool is here and can be used at any time.</para>
18706 <para><emphasis>Get there:</emphasis> More > Administration
18707 > Catalog > Koha to MARC Mapping</para>
18711 <para>The Koha to MARC Mapping page offers you the option of choosing
18712 from one of three tables in the database to assign values to.</para>
18715 <screeninfo>Koha to MARC Mapping Table Pull Down</screeninfo>
18719 <imagedata fileref="images/admin/cataloging/kohamarcmapping.png"/>
18724 <para>After choosing the table you would like to view, click 'OK.' To
18725 edit any mapping click on the 'Koha Filed' or the 'Edit' link.</para>
18728 <screeninfo>Map MARC Field to Koha Field</screeninfo>
18732 <imagedata fileref="images/admin/cataloging/mapmarc.png"/>
18737 <para>Choose which MARC field you would like to map to this Koha Field
18738 and click the 'OK' button. If you would like to clear all mappings,
18739 click the 'Click to "Unmap"' button.</para>
18742 <para>At this time you can map only 1 MARC field to 1 Koha field.
18743 This means that you won't be able to map both the 100a and the 700a
18744 to the author field, you need to choose one or the other.</para>
18750 <section id="keywordmapping">
18751 <title><link linkend="keywordmapping">Keywords to MARC Mapping</link></title>
18753 <para>This tool will allow you to map MARC fields to a set of
18754 predefined keywords.</para>
18758 <para><emphasis>Get there:</emphasis> More > Administration
18759 > Catalog > Keywords to MARC Mapping</para>
18764 <para>This tool only effects sites that are not using the XSLT
18765 Stylesheets.</para>
18768 <para>At this time the only keyword in use is 'subtitle.'</para>
18770 <para>Using this tool you can define what MARC field prints to the
18771 detail screen of the bibliographic record using keywords. The
18772 following example will use the subtitle field.</para>
18774 <para>Using the Framework pull down menu, choose the <link linkend="marcbibframeworks">Framework</link> you would like to apply
18775 this rule to. For example, the subtitle for books can be found in the
18776 245$b field.</para>
18779 <screeninfo>Assigning Book Subtitle</screeninfo>
18783 <imagedata fileref="images/admin/cataloging/subtitlebookmapping.png"/>
18788 <para>However the subtitle for DVDs appears in 245$p</para>
18791 <screeninfo>Assigning DVD Subtitle</screeninfo>
18795 <imagedata fileref="images/admin/cataloging/subtitledvdmapping.png"/>
18800 <para>Using this tool you can tell Koha to print the right field as
18801 the subtitle when viewing the bibliographic record in the OPAC.</para>
18804 <screeninfo>Subtitle display in the OPAC</screeninfo>
18808 <imagedata fileref="images/admin/cataloging/subtitlebookinopac.png"/>
18813 <para>This tool can be used to chain together pieces of the record as
18814 well. If you want the series number to show in the title on your
18815 search results you simply have to map 490 $v to 'subtitle' along with
18817 <para>Chain together the fields you want to show after the item
18818 title in the order in which you want them to appear.</para>
18821 <para>Future developments will include additional keyword assigned
18825 <section id="marcbibframeworkstest">
18826 <title><link linkend="marcbibframeworkstest">MARC Bibliographic Framework Test</link></title>
18828 <para>Checks the MARC structure.</para>
18832 <para><emphasis>Get there:</emphasis> More > Administration
18833 > Catalog > MARC Bibliographic Framework Test</para>
18837 <para>If you change your MARC Bibliographic framework it's recommended
18838 that you run this tool to test for errors in your definition.</para>
18841 <screeninfo>Framework Test</screeninfo>
18845 <imagedata fileref="images/admin/cataloging/frameworktest.png"/>
18851 <section id="authoritiesadmin">
18852 <title><link linkend="authoritiesadmin">Authority Types</link></title>
18854 <para>Authority Types are basically MARC Frameworks for Authority
18855 records and because of that they follow the same editing rules found
18856 in the <link linkend="marcbibframeworks">MARC Bibliographic
18857 Frameworks</link> section of this manual. Koha comes with many of the
18858 necessary Authority frameworks already installed. To learn how to add
18859 and edit Authority Types, simply review the <link linkend="marcbibframeworks">MARC Bibliographic Frameworks</link>
18860 section of this manual.</para>
18864 <para><emphasis>Get there:</emphasis> More > Administration
18865 > Catalog > Authority Types</para>
18870 <section id="classificationsources">
18874 <firstname>Savitra</firstname>
18875 <surname>Sirohi</surname>
18877 <orgname>Nucsoft OSS Labs</orgname>
18882 <firstname>Nicole C.</firstname>
18883 <surname>Engard</surname>
18884 <contrib>Fixed typos, changed content where
18885 necessary and added new screenshots.</contrib>
18889 <pubdate>2010</pubdate>
18892 <title><link linkend="classificationsources">Classification Sources</link></title>
18894 <para>Source of classification or shelving scheme is an <link linkend="authorizedvalues">Authorized Values</link> category that is mapped to field 952$2 and 942$2 in Koha's
18895 MARC Bibliographic frameworks and stored in the items.cn_source field in the
18900 <para><emphasis>Get there:</emphasis> More > Administration
18901 > Catalog > Classification sources</para>
18906 <screeninfo>Classification Sources</screeninfo>
18910 <imagedata fileref="images/admin/cataloging/classsources.png"/>
18915 <para>Commonly used values of this field are:</para>
18919 <para>ddc - Dewey Decimal Classification</para>
18923 <para>lcc - Library of Congress Classification</para>
18927 <para>If you chose to install classification sources during Koha's
18928 installation, you would see other values too:</para>
18932 <para>ANSCR (sound recordings)</para>
18936 <para>SuDOC classification</para>
18940 <para>Universal Decimal Classification</para>
18944 <para>Other/Generic Classification</para>
18948 <section id="addingclasssource">
18949 <title><link linkend="addingclasssource">Adding/Editing Classification Sources</link></title>
18951 <para>You can add your own source of classification by using the New
18952 Classification Source button. To edit use the Edit link.</para>
18955 <screeninfo>Add classification source</screeninfo>
18959 <imagedata fileref="images/admin/cataloging/addclasssource.png"/>
18964 <para>When creating or editing:</para>
18968 <para>You will need to enter a code and a description.</para>
18972 <para>Check the 'Source in use?' checkbox if you want the value
18973 to appear in the drop down list for this category.</para>
18977 <para>Select the appropriate <link linkend="classfilingrules">filing rule</link> from the drop down
18985 <section id="classfilingrules">
18986 <title><link linkend="classfilingrules">Classification Filing Rules</link></title>
18988 <para>Filing rules determine the order in which items are placed on
18991 <para>Values that are pre-configured in Koha are:</para>
19003 <para>Generic</para>
19007 <para>Filing rules are mapped to <link linkend="addingclasssource">Classification sources</link>. You can
19008 setup new filing rules by using the New Filing Rule button. To edit
19009 use the Edit link.</para>
19011 <para>When creating or editing:</para>
19015 <para>Enter a code and a description</para>
19019 <para>Choose an appropriate filing routine - dewey, generic or
19026 <section id="recordmatchingrules">
19030 <firstname>Joy</firstname>
19031 <surname>Nelson</surname>
19033 <orgname>ByWater Solutions</orgname>
19038 <firstname>Nicole C.</firstname>
19039 <surname>Engard</surname>
19040 <contrib>Changed/edited content where necessary.</contrib>
19044 <pubdate>2013</pubdate>
19046 <title><link linkend="recordmatchingrules">Record Matching Rules</link></title>
19048 <para>Record matching rules are used when importing MARC records into
19053 <para><emphasis>Get there:</emphasis> More > Administration
19054 > Catalog > Record Matching Rules</para>
19058 <para>The rules that you set up here will be referenced with you <link linkend="stagemarc">Stage MARC Records for Import</link>.</para>
19059 <para>It is important to understand the difference between Match Points and Match Checks
19060 before adding new matching rules to Koha.</para>
19062 <para>Match Points are the criteria that you enter that must be met in order for an incoming
19063 record to match an existing MARC record in your catalog. You can have multiple match
19064 points on an import rule each with its own score. An incoming record will be compared
19065 against your existing records (‘one record at a time’) and given a score for each match
19066 point. When the total score of the matchpoints matches or exceeds the threshold given for
19067 the matching rule, Koha assumes a good match and imports/overlays according your
19068 specifications in the import process. An area to watch out for here is the sum of the
19069 match points. Doublecheck that the matches you want will add up to a successful
19072 <para>Example: </para>
19073 <para>Threshold of 1000 </para>
19074 <para>Match Point on 020$a 1000 </para>
19075 <para>Match Point on 022$a 1000 </para>
19076 <para>Match Point on 245$a 500 </para>
19077 <para>Match Point on 100$a 100</para>
19079 <para>In the example above, a match on either the 020$a or the 022$a will result in a successful match. A match on 245$a title and 100$a author (and not on 020$a or 022$a) will only add up to 600 and not be a match. And a match on 020$a and 245$a will result in 1500 and while this is a successful match, the extra 500 point for the 245$a title match are superfluous. The incoming record successfully matched on the 020$a without the need for the 245$a match. However, if you assigned a score of 500 to the 100$a Match Point, a match on 245$a title and 100$a author will be considered a successful match (total of 1000) even if the 020$a is not a match.</para>
19081 <para>Match Checks are not commonly used in import rules. However, they can serve a couple of
19082 purposes in matching records. First, match checks can be used as the matching criteria
19083 instead of the match points if your indexes are stale and out of date. The match checks go
19084 right for the data instead of relying on the data in the indexes. (If you fear your
19085 indexes are out of date, a rebuild of your indexes would be a great idea and solve that
19086 situation!) The other use for a Match Check is as a “double check” or “veto” of your
19087 matching rule. For example, if you have a matching rule as below:</para>
19088 <para>Threshold of 1000 </para>
19089 <para>Match Point on 020$a 1000 </para>
19090 <para>Match Check on 245$a</para>
19092 <para>Koha will first look at the 020$a tag/subfield to see if the incoming record matches an existing record. If it does, it will then move on to the Match Check and look directly at the 245$a value in the incoming data and compare it to the 245$a in the existing ‘matched’ record in your catalog. If the 245$a matches, Koha continues on as if a match was successful. If the 245$a does not match, then Koha concludes that the two records are not a match after all. The Match Checks can be a really useful tool in confirming true matches.</para>
19094 <para>When looking to create matching rules for your authority records the following indexes will be
19096 <table frame="void" id="authorityindexes">
19097 <caption>Authority Indexes</caption>
19100 <th>Index name</th>
19101 <th>Matches Marc Tag</th>
19106 <td>LC-cardnumber</td>
19110 <td>Personal-name</td>
19114 <td>Corporate-name-heading</td>
19118 <td>Meeting-name</td>
19122 <td>Title-uniform</td>
19126 <td>Chronological-term</td>
19130 <td>Subject-topical</td>
19134 <td>Name-geographic</td>
19138 <td>Term-genre-form</td>
19143 <section id="addrecordmatchrule">
19144 <title><link linkend="addrecordmatchrule">Adding Matching Rules</link></title>
19145 <para>To create a new matching rule :</para>
19148 <para>Click 'New Record Matching Rule'</para>
19150 <screeninfo>Add record matching rule</screeninfo>
19153 <imagedata fileref="images/admin/cataloging/newmatchrule.png"/>
19159 <para>Choose a unique name and enter it in the 'Matching rule code' field</para>
19162 <para>'Description' can be anything you want to make it clear to you what rule
19163 you're picking</para>
19166 <para>'Match threshold' is the total number of 'points' a biblio must earn to be
19167 considered a 'match'</para>
19170 <para>'Record type' is the type of import this rule will be used for - either
19171 authority or bibliographic</para>
19174 <para>Match points are set up to determine what fields to match on</para>
19177 <para>'Search index' can be found by looking at the ccl.properties file on your
19178 system which tells the zebra indexing what data to search for in the MARC
19182 <para>'Score' - The number of 'points' a match on this field is worth. If the sum
19183 of each score is greater than the match threshold, the incoming record is a
19184 match to the existing record</para>
19187 <para>Enter the MARC tag you want to match on in the 'Tag' field</para>
19190 <para>Enter the MARC tag subfield you want to match on in the 'Subfields'
19194 <para>'Offset' - For use with control fields, 001-009</para>
19197 <para>'Length' - For use with control fields, 001-009</para>
19200 <para>Koha only has one 'Normalization rule' that removes extra characters such as
19201 commas and semicolons. The value you enter in this field is irrelevant to the
19202 normalization process.</para>
19205 <para>'Required match checks' - ??</para>
19211 <section id="samplerecordmatch">
19212 <title><link linkend="samplerecordmatch">Sample Bibliographic Record Matching Rule: Control Number</link></title>
19215 <screeninfo>LOC Matching Rule</screeninfo>
19219 <imagedata fileref="images/admin/cataloging/samplematchrule.png"/>
19226 <para>Match threshold: 100</para>
19229 <para>Record type: Bibliographic<itemizedlist>
19232 <para>If you'd like a rule to match on the 001 in authority records you will
19233 need the repeat all of these values and change just the record type to
19234 'Authority record'</para>
19237 </itemizedlist></para>
19241 <para>Matchpoints (just the one):</para>
19245 <para>Search index: Control-number</para>
19249 <para>Score: 101</para>
19253 <para>Tag: 001</para>
19258 <para>this field is for the control number assigned by the
19259 organization creating, using, or distributing the
19267 <para>Subfields: a</para>
19271 <para>Offset: 0</para>
19275 <para>Length: 0</para>
19279 <para>Normalization rule: Control-number</para>
19283 <para>Required Match checks: none (remove the blank one)</para>
19286 <screeninfo>Remove match check</screeninfo>
19290 <imagedata fileref="images/admin/cataloging/removematchcheck.png"/>
19299 <section id="oaisetsconfig">
19300 <title><link linkend="oaisetsconfig">OAI Sets Configuration</link></title>
19302 <para>On this page you can create, modify and delete OAI-PMH
19305 <section id="oaicreate">
19306 <title><link linkend="oaicreate">Create a set</link></title>
19308 <para>To create a set:</para>
19312 <para>Click on the link 'Add a new set'</para>
19316 <para>Fill the mandatory fields 'setSpec' and 'setName'</para>
19320 <para>Then you can add descriptions for this set. To do this
19321 click on 'Add description' and fill the newly created text box.
19322 You can add as many descriptions as you want.</para>
19326 <para>Click on 'Save' button'</para>
19331 <section id="oaimodify">
19332 <title><link linkend="oaimodify">Modify/Delete a set</link></title>
19334 <para>To modify a set, just click on the link 'Modify' on the same
19335 line of the set you want to modify. A form similar to set creation
19336 form will appear and allow you to modify the setSpec, setName and
19337 descriptions.</para>
19339 <para>To delete a set, just click on the link 'Delete' on the same
19340 line of the set you want to delete.</para>
19343 <section id="oaimapping">
19344 <title><link linkend="oaimapping">Define mappings</link></title>
19346 <para>Here you can define how a set will be build (what records will
19347 belong to this set) by defining mappings. Mappings are a list of
19348 conditions on record content. A record only need to match one
19349 condition to belong to the set.</para>
19353 <para>Fill the fields 'Field', 'Subfield' and 'Value'. For
19354 example if you want to include in this set all records that have
19355 a 999$9 equal to 'XXX'. Fill 'Field' with 999, 'Subfield' with 9
19356 and 'Value' with XXX.</para>
19360 <para>If you want to add another condition, click on 'OR' button
19361 and repeat step 1.</para>
19365 <para>Click on 'Save'</para>
19369 <para>To delete a condition, just leave at least one of 'Field',
19370 'Subfield' or 'Value' empty and click on 'Save'.<note>
19371 <para>Actually, a condition is true if value in the
19372 corresponding subfield is strictly equal to what is defined if
19373 'Value'. A record having 999$9 = 'XXX YYY' will not belong to a
19374 set where condition is 999$9 = 'XXX'.</para>
19377 <para>And it is case sensitive : a record having 999$9 = 'xxx' will
19378 not belong to a set where condition is 999$9 = 'XXX'.</para>
19381 <section id="oaibuild">
19382 <title><link linkend="oaibuild">Build sets</link></title>
19384 <para>Once you have configured all your sets, you have to build the
19385 sets. This is done by calling the script
19386 misc/migration_tools/build_oai_sets.pl.</para>
19389 <section id="itemsearchadmin">
19390 <title><link linkend="itemsearchadmin">Item search fields</link></title>
19391 <para>From here you can add custom search fields to the <link linkend="searchguide-itemsearch">item search</link> option in the staff client. <screenshot>
19392 <screeninfo>Item search fields</screeninfo>
19395 <imagedata fileref="images/admin/cataloging/itemsearchfields.png"/>
19398 </screenshot></para>
19399 <para>To add a new search term simply click the 'New search field' button<screenshot>
19400 <screeninfo>Add new field</screeninfo>
19403 <imagedata fileref="images/admin/cataloging/additemsearchfields.png"/>
19406 </screenshot><itemizedlist>
19408 <para>Name is a field for you to identify the search term</para>
19411 <para>Label is what will appear on the item search page</para>
19414 <para>MARC field allows you to pick which field you'd like to search in</para>
19417 <para>MARC subfield is the subfield you'd like to search in</para>
19420 <para>Authorised values category can be used to turn this search field in to a pull
19421 down instead of a free text field</para>
19423 </itemizedlist></para>
19424 <para>Once your new field is added it will be visible at the top of this page and on the
19425 item search page<screenshot>
19426 <screeninfo>Search option</screeninfo>
19429 <imagedata fileref="images/admin/cataloging/customsearch.png"/>
19432 </screenshot></para>
19436 <section id="acqadmin">
19437 <title><link linkend="acqadmin">Acquisitions</link></title>
19439 <para>The Koha Acquisitions module provides a way for the library to
19440 record orders placed with vendors and manage purchase budgets.</para>
19442 <para>Before using the <link linkend="acqmodule">Acquisitions
19443 Module</link>, you will want to make sure that you have completed all of
19448 <para><emphasis>Get there:</emphasis> More > Administration >
19449 Acquisitions</para>
19453 <section id="currexchangeadmin">
19454 <title><link linkend="currexchangeadmin">Currencies and Exchange Rates</link></title>
19456 <para>If you place orders from more than one country you will want to
19457 input currency exchange rates so that your acquisitions module will
19458 properly calculate totals.</para>
19462 <para><emphasis>Get there:</emphasis> More > Administration
19463 > Acquisitions > Currencies and Exchange Rates</para>
19468 <screeninfo>Currencies</screeninfo>
19472 <imagedata fileref="images/admin/acquisitions/currencies.png"/>
19478 <para>This data is not automatically updated, so be sure to keep it
19479 up to date so that your accounting is kept correct.</para>
19481 <para>The ISO code you enter will be used when importing MARC files via the staging tools,
19482 the tool will attempt to find and use the price of the currently active currency. </para>
19484 <para>The active currency is the main currency you use in your
19485 library. Your active currency will have a check mark in the 'Active'
19486 column. If you don't have an active currency you will see an error
19487 message telling you to choose an active currency.</para>
19490 <screeninfo>No active currency warning</screeninfo>
19494 <imagedata fileref="images/admin/acquisitions/nocurrency.png"/>
19500 <section id="budgetplanning">
19501 <title><link linkend="budgetplanning">Budgets</link></title>
19503 <para>Budgets are used for tracking accounting values related to acquisitions. For example
19504 you could create a Budget for the current year (ex. 2015) and then break that into <link linkend="funds">Funds</link> for different areas of the library (ex. Books, Audio,
19509 <para><emphasis>Get there:</emphasis> More > Administration
19510 > Acquisitions > Budgets</para>
19514 <para>When visiting the main budget administration you will see two
19515 tabs, one for active and one for inactive budgets.</para>
19518 <screeninfo>Budgets List</screeninfo>
19522 <imagedata fileref="images/admin/acquisitions/budgetslist.png"/>
19527 <section id="addbudget">
19528 <title><link linkend="addbudget">Adding budgets</link></title>
19530 <para>Budgets can either be created <link linkend="addnewbudget">from scratch</link>, by
19531 <link linkend="duplicatebudget">duplicating the previous year's budget</link> or by
19532 <link linkend="closebudget">closing a previous year's budget</link>.</para>
19533 <section id="addnewbudget">
19534 <title><link linkend="addnewbudget">Add a new budget</link></title>
19535 <para>If you haven't used Koha before for acquisitions then you'll need to start fresh
19536 with a new budget. To add a new budget click the 'New Budget' button.</para>
19538 <screeninfo>New Budget Form</screeninfo>
19541 <imagedata fileref="images/admin/acquisitions/newbudgetform.png"/>
19547 <para>Choose the time period this budget is for, whether it's an academic year, a
19548 fiscal year, a quarter, etc.</para>
19551 <para>The Description should be something that will help you identify the budget
19552 when ordering</para>
19555 <para>In the amount box do not use any symbols, simply enter the amount of the
19556 budget with numbers and decimals.</para>
19559 <para>Marking a budget active makes it usable when placing orders in the
19560 acquisitions module, even if the order is placed after the budget end date. This
19561 will allow you to record orders that were places in a previous budget
19565 <para>Locking a budget means that Funds will not be able to be modified by
19569 <para>Once you have made your edits, click the 'Save Changes' button. You will be
19570 brought to a list of your existing budgets.</para>
19572 <screeninfo>List of Budgets</screeninfo>
19575 <imagedata fileref="images/admin/acquisitions/budgetslist.png"/>
19580 <section id="duplicatebudget">
19581 <title><link linkend="duplicatebudget">Duplicate a budget</link></title>
19582 <para>To duplicate a budget from a previous year, click on the link for the budget name
19583 from the list of budgets</para>
19585 <screeninfo>Budgets List</screeninfo>
19588 <imagedata fileref="images/admin/acquisitions/budgetslist.png"/>
19592 <para>On the screen listing the budget breakdown click the Edit button at the top and
19593 choose to Duplicate budget</para>
19595 <screeninfo>Duplicate Budget</screeninfo>
19598 <imagedata fileref="images/admin/acquisitions/duplicatebudget.png"/>
19602 <para>You can also click the 'Actions' button to the right of the budget and choose 'Duplicate'.<screenshot>
19603 <screeninfo>Duplicate budget</screeninfo>
19606 <imagedata fileref="images/admin/acquisitions/duplicateaction.png"/>
19609 </screenshot></para>
19610 <para>In both cases you will be presented with a form where you simply need to enter the
19611 new start and end date and save the budget.</para>
19613 <screeninfo>New Duplicate Budget</screeninfo>
19616 <imagedata fileref="images/admin/acquisitions/duplicatestartend.png"/>
19620 <para>Check the box for 'Mark the original budget as inactive' if the original budget
19621 should no longer be used. </para>
19622 <para>Check the box for 'Set all funds to zero' if you wish the new budget to contain
19623 all the same fund structures as the previous budget but no allocations until you
19624 manually enter an amount in the fund.</para>
19625 <para>This will not only duplicate your budget, but all of the funds associated with
19626 that budget so that you can reuse budgets and funds from year to year and so that you
19627 can move unreceived orders and if desired unspent funds from a previous budget to the
19630 <section id="closebudget">
19634 <firstname>Denise</firstname>
19635 <surname>Hannibal</surname>
19637 <orgname>Washington University in St. Louis</orgname>
19641 <firstname>Nicole C.</firstname>
19642 <surname>Engard</surname>
19645 <pubdate>2014</pubdate>
19647 <title><link linkend="closebudget">Close a budget</link></title>
19648 <para>Close a budget to move or roll over unreceived orders and if desired unspent funds
19649 from a previous budget to a new budget. Before closing your budget you might want to
19650 <link linkend="duplicatebudget">duplicate the previous year's budget</link> so that
19651 you have somewhere for the unreceived orders to roll to.</para>
19652 <para>Find the previous budget with unreceived orders on the Active budgets or the
19653 Inactive budgets tab and select 'Close' under 'Actions'. <screenshot>
19654 <screeninfo>Close a budget</screeninfo>
19657 <imagedata fileref="images/admin/acquisitions/closebudget.png"/>
19660 </screenshot></para>
19662 <para>In order for the unreceived orders to be automatically moved to the new budget,
19663 the fund structures in the previous budget must exist in the new budget. Budgets
19664 without unreceived orders cannot be closed.</para>
19666 <para>When you select 'Close' you will be presented with a form.<screenshot>
19667 <screeninfo>Closing a budget</screeninfo>
19670 <imagedata fileref="images/admin/acquisitions/closebudgetoptions.png"/>
19673 </screenshot></para>
19674 <para>Use the 'Select a budget' drop down to choose the new budget for the unreceived
19676 <para>Check the box for 'Move remaining unspent funds' to move the unspent amounts from
19677 the funds of the budget being closed to the selected budget.</para>
19678 <para>Once you have made your choices, click the 'Move unreceived orders' button. You
19679 will be presented with a dialog box that says 'You have chosen to move all unreceived
19680 orders from 'Budget X' to 'Budget Y'. This action cannot be reversed. Do you wish to
19681 continue?' Budget X is the budget to be closed and Budget Y is the selected budget. <screenshot>
19682 <screeninfo>Close warning</screeninfo>
19685 <imagedata fileref="images/admin/acquisitions/closewarning.png"/>
19688 </screenshot></para>
19689 <para>If everything seems correct click 'OK' and the unreceived orders and, if selected,
19690 unspent funds will be moved. </para>
19691 <para>Wait until the 'Report after moving unreceived orders from budget X to Y'
19692 displays. This will list the order numbers which have been impacted (grouped by fund)
19693 and detail if the unreceived order was moved or if there was a problem. For example,
19694 if the new budget does not contain a fund with the same name as the previous budget,
19695 the order will not be moved.</para>
19697 <screeninfo>Close report</screeninfo>
19700 <imagedata fileref="images/admin/acquisitions/closereport.png"/>
19708 <section id="funds">
19709 <title><link linkend="funds">Funds</link></title>
19713 <para><emphasis>Get there:</emphasis> More > Administration
19714 > Acquisitions > Funds</para>
19718 <section id="addbudgetfund">
19719 <title><link linkend="addbudgetfund">Add a Fund</link></title>
19721 <para>A fund is added to a budget.</para>
19724 <para>A <link linkend="addbudget">budget</link> must be defined
19725 before a fund can be created.</para>
19726 </important>To add a new fund click the New button and then choose
19727 which Budget you would like to add the fund to.</para>
19730 <screeninfo>Choose which budget to add a fund to</screeninfo>
19734 <imagedata fileref="images/admin/acquisitions/newfund.png"/>
19739 <para>In the form that appears you want to enter the basics about your fund.</para>
19742 <screeninfo>New Fund Form</screeninfo>
19746 <imagedata fileref="images/admin/acquisitions/newfundform.png"/>
19751 <para>The three first fields are required, the rest are
19756 <para>Fund Code is a unique identifier for your fund</para>
19760 <para>The Fund Name should be something that librarians will
19765 <para>Amount should be entered with only numbers and decimals, no other
19769 <para>Warning at (%) or Warning at (amount) can be filled in to make Koha warn you
19770 before you spend a certain percentage or amount of your budget. This will prevent
19771 you from overspending.</para>
19775 <para>You can choose to assign this fund to a librarian. Doing
19776 so will make it so that only that librarian can make changes to
19781 <para>Choose which library will be using this fund</para>
19785 <para>You can restrict who can order from this fund by choosing either the 'owner',
19786 'owner and users' or 'owner, users and library' from the 'Restrict access to'
19790 <screeninfo>Restrict Fund Access</screeninfo>
19794 <imagedata fileref="images/admin/acquisitions/restrictfund.png"/>
19801 <para>Without an owner, the access restriction will be ignored, be sure to enter
19802 an owner as well as choose a restriction</para>
19809 <para>Notes are simply for any descriptive notes you might want
19810 to add so that librarians know when to use this fund</para>
19814 <para>Planning categories are used for statistical purposes. To
19815 learn more about planning categories, check out the <link linkend="planningcatfaq">Planning Category FAQ</link>.</para>
19819 <para>When complete, click 'Submit' and you will be brought to a
19820 list of all of the funds for the budget.</para>
19823 <screeninfo>List of funds</screeninfo>
19827 <imagedata fileref="images/admin/acquisitions/fundlist.png"/>
19831 <para>The monetary columns in the fund table break down as follows:<orderedlist>
19833 <para>Base-level allocated is the "Amount" value you defined when creating the
19837 <para>Base-level ordered is the ordered amount for this fund (without child
19841 <para>Total ordered is the base-level ordered for this fund and all its child
19845 <para>Base-level spent is the spent amount for this fund (without child
19849 <para>Total spent is the base-level spent for this fund and all its child
19853 <para>Base-level available is 1 - 2</para>
19856 <para>Total available is 1 - 3</para>
19858 </orderedlist></para>
19860 <para>To the right of each fund you will find the 'Actions' button under which you will
19861 find the 'Edit,' 'Delete,' and 'Add Child Fund' options. </para>
19863 <screeninfo>Fund actions</screeninfo>
19866 <imagedata fileref="images/admin/acquisitions/fundactions.png"/>
19870 <para>A child fund simply a sub-fund of the fund listed. An example would be to have a
19871 fund for 'Fiction' and under that have a fund for 'New Releases' and a fund for 'Science
19872 Fiction.' It is an optional way to further organize your finances.</para>
19873 <para>Funds with children will show with a small arrow to the left. Clicking that will
19874 show you the children funds.</para>
19876 <screeninfo>Child funds</screeninfo>
19879 <imagedata fileref="images/admin/acquisitions/childfunds.png"/>
19885 <section id="fundsplanning">
19886 <title><link linkend="fundsplanning">Budget Planning</link></title>
19888 <para>When viewing the list of funds click the 'Planning' button and
19889 choose how you would like to plan to spend your budget.</para>
19892 <screeninfo>Planning pull down menu</screeninfo>
19896 <imagedata fileref="images/admin/acquisitions/planningpulldown.png"/>
19901 <para>If you choose 'Plan by MONTHS' you will see the budgeted
19902 amount broken down by months:</para>
19905 <screeninfo>Budget Planning Formula</screeninfo>
19909 <imagedata fileref="images/admin/acquisitions/planningbymonths.png"/>
19914 <para>To hide some of the columns you can click the 'hide' link to the right (or below as
19915 in the screenshot above) the dates. To add more columns you can click the 'Show a
19916 column' link found below the 'Fund Remaining' heading.</para>
19919 <screeninfo>Choose columns to add</screeninfo>
19923 <imagedata fileref="images/admin/acquisitions/addplanningcol.png"/>
19928 <para>From here you can plan your budget spending by manually
19929 entering values or by clicking the 'Auto-fill row' button. If you
19930 choose to auto-fill the form the system will try to divide the
19931 amount accordingly, you may have to make some edits to split things
19932 more accurately.</para>
19935 <screeninfo>Auto-filled columns</screeninfo>
19939 <imagedata fileref="images/admin/acquisitions/autofill.png"/>
19944 <para>Once your changes are made, click the 'Save' button. If you
19945 would like to export your data as a CSV file you can do so by
19946 entering a file name in the 'Output to a file named' field and
19947 clicking the 'Output' button.</para>
19950 <screeninfo>Export planning as CSV</screeninfo>
19954 <imagedata fileref="images/admin/acquisitions/planningcsv.png"/>
19960 <section id="ediaccounts">
19961 <title><link linkend="ediaccounts">EDI Accounts</link></title>
19962 <para>From here you can set up the information needed to connect to your acquisitions
19964 <para>Before you begin you will need at least one <link linkend="addacqvendor">Vendor
19965 set up in Acquisitions</link>.</para>
19967 <para>To add account information click the 'New account' button.<screenshot>
19968 <screeninfo>New account</screeninfo>
19971 <imagedata fileref="images/admin/acquisitions/newedi.png"/>
19974 </screenshot></para>
19975 <para>In the form that appears you will want to enter your vendor information. </para>
19978 <screeninfo>New account information</screeninfo>
19981 <imagedata fileref="images/admin/acquisitions/newediaccount.png"/>
19986 <para>Each vendor will have one account.</para>
19988 <section id="libraryeans">
19989 <title><link linkend="libraryeans">Library EANs</link></title>
19990 <para>A library EAN is the identifier the vendor gives the library to send back to them so
19991 they know which account to use when billing. One EDI account can have multiple
19993 <para>To add an EAN click the 'New EAN' button.</para>
19996 <screeninfo>New EAN</screeninfo>
19999 <imagedata fileref="images/admin/acquisitions/newean.png"/>
20004 <para>In the form that appears enter the information provided by your vendor.</para>
20007 <screeninfo>New EAN Form</screeninfo>
20010 <imagedata fileref="images/admin/acquisitions/neweanform.png"/>
20018 <section id="additionaladmin">
20019 <title><link linkend="additionaladmin">Additional Parameters</link></title>
20023 <para><emphasis>Get there:</emphasis> More > Administration >
20024 Additional Parameters</para>
20028 <section id="z3950admin">
20029 <title><link linkend="z3950admin">Z39.50/SRU servers</link></title>
20031 <para>Z39.50 is a client–server protocol for searching and retrieving information from
20032 remote computer databases, in short it's a tool used for copy cataloging. </para>
20033 <para>SRU- Search/Retrieve via URL - is a standard XML-based protocol for search queries,
20034 utilizing CQL - Contextual Query Language - a standard syntax for representing queries. </para>
20035 <para>Using Koha you can connect to any Z39.50 or SRU target that is publicly available or
20036 that you have the log in information to and copy both bibliographic and/or authority
20037 records from that source.</para>
20041 <para><emphasis>Get there:</emphasis> More > Administration > Additional
20042 Parameters > Z39.50/SRU Servers</para>
20046 <para>Koha comes with a default list of Z39.50/SRU targets set up that you can add to, edit
20050 <screeninfo>List of Z39.50 Servers in Koha</screeninfo>
20054 <imagedata fileref="images/admin/additional/z39list.png"/>
20059 <para>To find additional Z39.50 targets you use IndexData's IRSpy: <ulink url="http://irspy.indexdata.com/">http://irspy.indexdata.com</ulink> or the Library of
20060 Congress's List of Targets <ulink url="http://www.loc.gov/z3950/">http://www.loc.gov/z3950/</ulink>
20063 <section id="addztarget">
20064 <title><link linkend="addztarget">Add a Z39.50 Target</link></title>
20068 <para>From the main Z39.50 page, click 'New Z39.50
20071 <screeninfo>New Z39.50 Server Form</screeninfo>
20074 <imagedata fileref="images/admin/additional/newz39.png"/>
20081 <para>'Z39.50 server' should be populated with a name that will help you identify
20082 the source (such as the library name).</para>
20085 <para>'Hostname' will be the address to the Z39.50 target.</para>
20088 <para>'Port' tells Koha what port to listen on to get results from this
20092 <para>'Userid' and 'Password' are only required for servers that are password
20096 <para>Check the 'Preselected' box if you want this target to always be selected by
20100 <para>'Rank' lets you enter where in the list you'd like this target to appear.<itemizedlist>
20102 <para>If this is left blank the targets will be in alphabetical
20105 </itemizedlist></para>
20108 <para>'Syntax' is the MARC flavor you use.</para>
20111 <para>'Encoding' tells the system how to read special characters.</para>
20114 <para>'Timeout' is helpful for targets that take a long while. You can set the
20115 timeout so that it doesn't keep trying the target if results aren't found in a
20116 reasonable amount of time.</para>
20119 <para>'Record type' lets you define if this is a bibliographic or an authority
20123 <para>'XSLT file(s)' lets enter one or more (comma-separated) XSLT file names that
20124 you want to apply on the search results.<itemizedlist>
20126 <para>When retrieving records from external targets you may wish to automate
20127 some changes to those records. XSLT's allow you to do this. Koha ships
20128 with some sample XSLT files in the /koha-tmpl/intranet-tmpl/prog/en/xslt/
20129 directory ready for use: <itemizedlist>
20131 <para>Del952.xsl: Remove items (MARC21/NORMARC)</para>
20134 <para>Del995.xsl: Remove items (UNIMARC)</para>
20137 <para>Del9LinksExcept952.xsl: Remove $9 links. Skip item fields
20138 (MARC21/NORMARC)</para>
20141 <para>Del9LinksExcept995.xsl: Remove $9 links. Skip item fields
20144 </itemizedlist></para>
20146 </itemizedlist></para>
20153 <section id="suggestztarget">
20154 <title><link linkend="suggestztarget">Suggested Bibliographic Z39.50 Targets</link></title>
20155 <para>Koha libraries with open Z39.50 targets can share and find connection information on
20156 the Koha wiki: <ulink url="http://wiki.koha-community.org/wiki/Koha_Open_Z39.50_Sources">http://wiki.koha-community.org/wiki/Koha_Open_Z39.50_Sources</ulink>. You can also
20157 find open Z39.50 targets by visiting IRSpy: <ulink url="http://irspy.indexdata.com">http://irspy.indexdata.com</ulink>.</para>
20159 <para>The following targets have been used successfully by other
20160 Koha libraries (in the Americas):</para>
20164 <para>ACCESS PENNSYLVANIA 205.247.101.11:210 INNOPAC</para>
20167 <para>CUYAHOGA COUNTY PUBLIC webcat.cuyahoga.lib.oh.us:210
20172 <para>GREATER SUDBURY PUBLIC 216.223.90.51:210 INNOPAC</para>
20176 <para>HALIFAX PUBLIC catalogue.halifaxpubliclibraries.ca:210
20181 <para>HALTON HILLS PUBLIC cat.hhpl.on.ca:210 halton_hills</para>
20185 <para>LIBRARY OF CONGRESS lx2.loc.gov: 210 LCDB</para>
20189 <para>LONDON PUBLIC LIBRARY catalogue.londonpubliclibrary.ca:210
20194 <para>MANITOBA PUBLIC library.gov.mb.ca:210 horizon</para>
20198 <para>MILTON PL cat.mpl.on.ca:210 horizon</para>
20202 <para>NATIONAL LIBRARY OF WALES cat.llgc.org.uk:210 default</para>
20205 <para>NHUPAC 199.192.6.130:211 nh_nhupac</para>
20208 <para>OCEAN STATE LIBRARIES (RI) catalog.oslri.net:210 INNOPAC</para>
20211 <para>OHIOLINK olc1.ohiolink.edu:210 INNOPAC</para>
20214 <para>PUBCAT prod890.dol.state.vt.us:2300 unicorn</para>
20217 <para>SAN JOAQUIN VALLEY PUBLIC LIBRARY SYSTEM (CA) hip1.sjvls.org:210 ZSERVER</para>
20220 <para>SEATTLE PUBLIC LIBRARY ZSERVER.SPL.ORG:210 HORIZON</para>
20224 <para>TORONTO PUBLIC symphony.torontopubliclibrary.ca:2200
20229 <para>TRI-UNI 129.97.129.194:7090 voyager</para>
20233 <para>VANCOUVER PUBLIC LIBRARY z3950.vpl.ca:210 Horizon</para>
20237 <section id="suggestauthz39">
20238 <title><link linkend="suggestauthz39">Suggested Authority Z39.50 Targets</link></title>
20239 <para>The following targets have been used successfully by other Koha libraries (in the
20243 <para>LIBRARIESAUSTRALIA AUTHORITIES z3950-test.librariesaustralia.nla.gov.au:210
20244 AuthTraining Userid: ANLEZ / Password: z39.50</para>
20247 <para>LIBRARY OF CONGRESS NAME AUTHORITIES lx2.loc.gov:210 NAF </para>
20250 <para>LIBRARY OF CONGRESS SUBJECT AUTHORITIES lx2.loc.gov:210 SAF</para>
20254 <section id="addsru">
20255 <title><link linkend="addsru">Add a SRU Target</link></title>
20258 <para>From the main Z39.50/SRU page, click 'New SRU Server'</para>
20260 <screeninfo>New SRU Server Form</screeninfo>
20263 <imagedata fileref="images/admin/additional/newsru.png"/>
20269 <para>'Server name' should be populated with a name that will help you identify
20270 the source (such as the library name).</para>
20273 <para>'Hostname' will be the address to the Z39.50 target.</para>
20276 <para>'Port' tells Koha what port to listen on to get results from this
20280 <para>'Userid' and 'Password' are only required for servers that are password
20284 <para>Check the 'Preselected' box if you want this target to always be selected by
20288 <para>'Rank' lets you enter where in the list you'd like this target to appear.<itemizedlist>
20290 <para>If this is left blank the targets will be in alphabetical
20293 </itemizedlist></para>
20296 <para>'Syntax' is the MARC flavor you use.</para>
20299 <para>'Encoding' tells the system how to read special characters.</para>
20302 <para>'Timeout' is helpful for targets that take a long while. You can set the
20303 timeout so that it doesn't keep trying the target if results aren't found in a
20304 reasonable amount of time.</para>
20307 <para>'Additional SRU options' is where you can enter additional options of the
20308 external server here, like sru_version=1.1 or schema=marc21, etc. Note that
20309 these options are server dependent.</para>
20312 <para>'SRU Search field mapping' lets you add or update the mapping from the
20313 available fields on the Koha search form to the specific server dependent index
20314 names. <itemizedlist>
20316 <para>To further refine your searches, you could add the following index
20317 names to the SRU search field mappings. To do this, edit the server and
20318 click the Modify button next to this field.
20319 <table cellpadding="4" cellspacing="4" frame="all">
20320 <title>SRU Mapping</title>
20322 <tgroup align="left" cols="2" colsep="1" rowsep="1">
20325 <entry>Title</entry>
20326 <entry>dc.title</entry>
20329 <entry>ISBN</entry>
20330 <entry>bath.isbn</entry>
20334 <entry>cql.anywhere</entry>
20337 <entry>Author</entry>
20338 <entry>dc.author</entry>
20341 <entry>ISSN</entry>
20342 <entry>bath.issn</entry>
20345 <entry>Subject</entry>
20346 <entry>dc.subject</entry>
20349 <entry>Standard ID</entry>
20350 <entry>bath.standardIdentifier</entry>
20356 </itemizedlist></para>
20359 <para>'XSLT file(s)' lets enter one or more (comma-separated) XSLT file names that
20360 you want to apply on the search results.<itemizedlist>
20362 <para>When retrieving records from external targets you may wish to automate
20363 some changes to those records. XSLT's allow you to do this. Koha ships
20364 with some sample XSLT files in the /koha-tmpl/intranet-tmpl/prog/en/xslt/
20365 directory ready for use: <itemizedlist>
20367 <para>Del952.xsl: Remove items (MARC21/NORMARC)</para>
20370 <para>Del995.xsl: Remove items (UNIMARC)</para>
20373 <para>Del9LinksExcept952.xsl: Remove $9 links. Skip item fields
20374 (MARC21/NORMARC)</para>
20377 <para>Del9LinksExcept995.xsl: Remove $9 links. Skip item fields
20380 </itemizedlist></para>
20382 </itemizedlist></para>
20389 <section id="didyoumean">
20390 <title><link linkend="didyoumean">Did you mean?</link></title>
20391 <para><emphasis>Get there:</emphasis> More > Administration > Additional Parameters
20392 > Did you mean?</para>
20393 <para>Koha can offer 'Did you mean?' options on searches based on values in your <link linkend="catauthorities">authorities</link>. <important>
20394 <para>Did you mean? only works in the OPAC at this time. The Intranet options are here
20395 for future development.</para>
20396 </important></para>
20397 <para>Using this page you can control which options Koha gives patrons on their search results.</para>
20399 <screeninfo>Did you mean?</screeninfo>
20402 <imagedata fileref="images/admin/additional/didyoumean.png"/>
20406 <para>To turn on the 'Did you mean?' bar on your search results you need to check the box
20407 next to each plugin you would like to use. The two plugins you have to choose from are:<itemizedlist>
20409 <para>The ExplodedTerms plugin suggests that the user try searching for
20410 broader/narrower/related terms for a given search (e.g. a user searching for "New
20411 York (State)" would click the link for narrower terms if they're also interested in
20412 "New York (City)"). This is only relevant for libraries with highly hierarchical
20413 authority data. </para>
20416 <para>The AuthorityFile plugin searches the authority file and suggests the user might
20417 be interested in bibs linked to the top 5 authorities</para>
20419 </itemizedlist></para>
20420 <para>If you want one plugin to take priority over another you simply drag it above the other.</para>
20422 <screeninfo>Drag and drop options</screeninfo>
20425 <imagedata fileref="images/admin/additional/didyoumeandrag.png"/>
20429 <para>If you choose both plugins you will see several options at the top of your search results</para>
20431 <screeninfo>Both plugins</screeninfo>
20434 <imagedata fileref="images/admin/additional/didyoumeanopacexplode.png"/>
20438 <para>If you choose just the AuthorityFile you'll see just authorities.</para>
20440 <screeninfo>AuthorityFile</screeninfo>
20443 <imagedata fileref="images/admin/additional/didyoumeanopacauth.png"/>
20448 <section id="admincolumns">
20449 <title><link linkend="admincolumns">Column settings</link></title>
20450 <para>This administration area will help you hide or display columns on fixed tables
20451 throughout the staff client. </para>
20454 <para><emphasis>Get there:</emphasis> Administration > Additional Parameters > Column
20459 <screeninfo>Column settings</screeninfo>
20462 <imagedata fileref="images/admin/additional/columns.png"/>
20466 <para>Clicking on the module you'd like to edit tables for will show you the options
20467 available to you. </para>
20468 <para>This area lets you control the columns that show in the table in question. If nothing
20469 is hidden you will see no check marks in the 'is hidden by default' column.</para>
20471 <screeninfo>Column settings</screeninfo>
20474 <imagedata fileref="images/admin/additional/setcurrencynohide.png"/>
20478 <para>And will see all of the columns when viewing the table on its regular page.</para>
20480 <screeninfo>Columns on currency table</screeninfo>
20483 <imagedata fileref="images/admin/additional/currenciesnohide.png"/>
20487 <para>If columns are hidden they will have checks in the 'is hidden by default'
20490 <screeninfo>Column settings</screeninfo>
20493 <imagedata fileref="images/admin/additional/setcurrencyhide.png"/>
20497 <para>And hidden when you view the table.</para>
20499 <screeninfo>Columns on currency table</screeninfo>
20502 <imagedata fileref="images/admin/additional/currencieshide.png"/>
20506 <para>You can also toggle columns using the 'Show/Hide Columns button in the top right of
20509 <screeninfo>Toggle columns</screeninfo>
20512 <imagedata fileref="images/admin/additional/togglecolumns.png"/>
20517 <section id="audioadmin">
20518 <title><link linkend="audioadmin">Audio alerts</link></title>
20519 <para>If you have your <link linkend="AudioAlerts">AudioAlerts</link> preference set to
20520 'Enable' you will be able to control the various alert sounds that Koha uses from this
20524 <para><emphasis>Get there:</emphasis> More > Administration > Additional Parameters >
20525 Audio alerts</para>
20528 <para>Each dialog box in Koha has a CSS class assigned to it that can be used as a selector
20529 for a sound.<screenshot>
20530 <screeninfo>Audio alerts</screeninfo>
20533 <imagedata fileref="images/admin/additional/alerts.png"/>
20536 </screenshot></para>
20537 <para>You can edit the defaults by clicking the 'Edit' button to the right of each alert<screenshot>
20538 <screeninfo>Edit alert</screeninfo>
20541 <imagedata fileref="images/admin/additional/editalert.png"/>
20544 </screenshot></para>
20545 <para>You can assign alerts to other CSS classes in Koha by entering that information in the
20546 selector box. For example if you enter
20547 <programlisting id="comment_text_146">body:contains('Check in message')</programlisting></para>
20548 <para>Then when you visit the checkin page you will hear an alert.</para>
20549 <para>Every page in Koha has a unique ID in the body tag which can be used to limit a sound
20550 to a specific page </para>
20551 <para>Any ID selector (where html contains id="name_of_id" ) and can also be a trigger as:
20552 #name_of_selector </para>
20554 <section id="smsadmin">
20555 <title><link linkend="smsadmin">SMS cellular providers</link></title>
20556 <important><para>This option will only appear if the <link linkend="SMSSendDriver">SMSSendDriver</link>
20557 preference is set to 'Email'</para></important>
20558 <para>From here you can enter as many cellular providers as you need to send SMS notices to
20559 your patrons using the email protocol.<screenshot>
20560 <screeninfo>SMS Providers</screeninfo>
20563 <imagedata fileref="images/admin/additional/smsproviders.png"/>
20566 </screenshot></para>
20567 <para>Some examples in the US are:<table frame="all" id="smsproviderstbl">
20568 <title>SMS Provider Examples</title>
20570 <colspec colname="c1" colnum="1"/>
20571 <colspec colname="c2" colnum="2"/>
20574 <entry>Mobile Carrier</entry>
20575 <entry>SMS Gateway Domain</entry>
20580 <entry>Alltel</entry>
20581 <entry>sms.alltelwireless.com</entry>
20584 <entry>AT&T</entry>
20585 <entry>txt.att.net</entry>
20588 <entry>Boost Mobile</entry>
20589 <entry>sms.myboostmobile.com</entry>
20592 <entry>Project Fi</entry>
20593 <entry>msg.fi.google.com</entry>
20596 <entry>Republic Wireless</entry>
20597 <entry>text.republicwireless.com</entry>
20600 <entry>Sprint</entry>
20601 <entry>messaging.sprintpcs.com</entry>
20604 <entry>T-Mobile</entry>
20605 <entry>tmomail.net</entry>
20608 <entry>U.S. Cellular</entry>
20609 <entry>email.uscc.net</entry>
20612 <entry>Verizon Wireless</entry>
20613 <entry>vtext.com</entry>
20616 <entry>Virgin Mobile</entry>
20617 <entry>vmobl.com</entry>
20623 <para>To add new providers enter the details in the form and click 'Add new' to save.<screenshot>
20624 <screeninfo>Add SMS Provider</screeninfo>
20627 <imagedata fileref="images/admin/additional/smsadd.png"/>
20630 </screenshot></para>
20631 <para>These options will appear in the OPAC for patrons to choose from on the <link linkend="opacmymsgs">messaging tab</link> if you have <link linkend="EnhancedMessagingPreferences">EnhancedMessagingPreferences</link> enabled.<screenshot>
20632 <screeninfo>Options for providers in the OPAC</screeninfo>
20635 <imagedata fileref="images/admin/additional/smsopacoptions.png"/>
20638 </screenshot></para>
20643 <chapter id="tools">
20644 <title>Tools</title>
20646 <para>Tools in Koha all perform some sort of action. Often many of the
20647 items listed under Tools in Koha are referred to as 'Reports' in other
20648 library management systems.</para>
20652 <para><emphasis>Get there:</emphasis> More > Tools</para>
20656 <section id="patrontools">
20657 <title><link linkend="patrontools">Patrons and Circulation</link></title>
20660 <section id="patronlists">
20661 <title><link linkend="patronlists">Patron lists</link></title>
20664 <para><emphasis>Get there:</emphasis> More > Tools > Patrons and Circulation >
20665 Patron lists</para>
20668 <para>Patron lists are a way to store a group of patrons for easy modification via the <link linkend="batchpatronmod">batch patron modification tool</link> or reporting.</para>
20670 <screeninfo>Patron lists</screeninfo>
20673 <imagedata fileref="images/tools/patronlists/patronlists.png"/>
20677 <para>To create a new list of patrons click the 'New patron list' button</para>
20679 <screeninfo>New patron list</screeninfo>
20682 <imagedata fileref="images/tools/patronlists/newpatronlist.png"/>
20686 <para>Enter a list name and save the list.</para>
20688 <screeninfo>Empty patron list</screeninfo>
20691 <imagedata fileref="images/tools/patronlists/addtopatronlist.png"/>
20695 <para>Each list has an 'Actions' menu with more list options.<screenshot>
20696 <screeninfo>Patron list actions</screeninfo>
20699 <imagedata fileref="images/tools/patronlists/patronlistmenu.png"/>
20702 </screenshot></para>
20703 <para>To add patrons to the list click the 'Add patrons' link in the 'Actions' menu.</para>
20705 <screeninfo>Add patron to a list</screeninfo>
20708 <imagedata fileref="images/tools/patronlists/addpatrontolist.png"/>
20712 <para>Enter the patron's name or cardnumber in the search box and click on the right result
20713 to add the patron.</para>
20715 <screeninfo>Patrons to add</screeninfo>
20718 <imagedata fileref="images/tools/patronlists/patronstoadd.png"/>
20722 <para>Once you have all of the patrons you would like to add you can click the 'Add patrons'
20723 button to save them to the list.</para>
20725 <screeninfo>List of patrons</screeninfo>
20728 <imagedata fileref="images/tools/patronlists/patronlist.png"/>
20734 <section id="comments">
20735 <title><link linkend="comments">Comments</link></title>
20739 <para><emphasis>Get there:</emphasis> More > Tools > Patrons
20740 and Circulation > Comments</para>
20744 <para>All comments added by patrons via the OPAC to bibliographic records require moderation
20745 by the librarians. If there are comments awaiting moderation they will be listed on the
20746 main page of the staff client below the module list:</para>
20749 <screeninfo>Comments pending approval</screeninfo>
20753 <imagedata fileref="images/tools/comments/commentswaiting.png"/>
20757 <para>and next to the Comments tool on the Tools Module<screenshot>
20758 <screeninfo>Comment count on Tools</screeninfo>
20761 <imagedata fileref="images/tools/comments/commentswaitingtools.png"/>
20764 </screenshot></para>
20766 <para>To moderate comments click on the notification on the main
20767 dashboard or go directly to the Comments Tool and click 'Approve' or
20768 'Delete' to the right of the comments awaiting moderation.</para>
20771 <screeninfo>Comment awaiting moderation</screeninfo>
20775 <imagedata fileref="images/tools/comments/commentmoderation.png"/>
20780 <para>If there are no comments to moderate you will see a message
20781 saying just that</para>
20784 <screeninfo>No comments to moderate</screeninfo>
20788 <imagedata fileref="images/tools/comments/nocomments.png"/>
20793 <para>You can also review and unapprove comments you have approved in
20794 the past by choosing the 'Approved comments' tab</para>
20797 <screeninfo>Approved comments</screeninfo>
20801 <imagedata fileref="images/tools/comments/commentapproved.png"/>
20807 <section id="patronimport">
20808 <title><link linkend="patronimport">Patron Import</link></title>
20812 <para><emphasis>Get there:</emphasis> More > Tools > Patrons
20813 and Circulation > Import Patrons</para>
20817 <para>The patron import tool can be used at any time to add patrons in
20818 bulk. It is commonly used in universities and schools when a new batch
20819 of students registers.</para>
20821 <section id="createpatronfile">
20822 <title><link linkend="createpatronfile">Creating Patron File</link></title>
20824 <para>Your Koha installation comes with a blank CSV file that you
20825 can use as a template for your patron records. If you would like to
20826 create the file yourself, make sure that your file has the following
20827 fields in this order as the header row:</para>
20828 <para>cardnumber, surname, firstname, title, othernames, initials, streetnumber,
20829 streettype, address, address2, city, state, zipcode, country, email, phone, mobile, fax,
20830 emailpro, phonepro, B_streetnumber, B_streettype, B_address, B_address2, B_city,
20831 B_state, B_zipcode, B_country, B_email, B_phone, dateofbirth, branchcode, categorycode,
20832 dateenrolled, dateexpiry, gonenoaddress, lost, debarred, debarredcomment, contactname,
20833 contactfirstname, contacttitle, guarantorid, borrowernotes, relationship, ethnicity,
20834 ethnotes, sex, password, flags, userid, opacnote, contactnote, sort1, sort2,
20835 altcontactfirstname, altcontactsurname, altcontactaddress1, altcontactaddress2,
20836 altcontactaddress3, altcontactstate, altcontactzipcode, altcontactcountry,
20837 altcontactphone, smsalertnumber, privacy, patron_attributes </para>
20840 <para>The 'password' should be stored in plaintext, and will be converted to a Bcrypt
20843 <para>If your passwords are already encrypted, talk to your
20844 systems administrator about options</para>
20848 <para>Date formats should match your <link linkend="dateformat">system preference</link>, and must be
20849 zero-padded, e.g. '01/02/2008'.</para>
20853 <para>The fields 'branchcode', 'categorycode' and all fields you have defined in the
20854 <link linkend="BorrowerMandatoryField">BorrowerMandatoryField</link> preference are
20855 required and must match valid entries in your database.</para>
20859 <para>If loading <link linkend="patronattributetypes">patron
20860 attributes</link>, the 'patron_attributes' field should contain a
20861 comma-separated list of attribute types and values.</para>
20865 <para>The attribute type code and a colon should precede each value.<itemizedlist>
20867 <para>For example: "INSTID:12345,BASEBALL:Cubs" </para>
20870 <para>This field must be wrapped in quotes if multiple values are defined.
20874 <para>Since values can contain spaces, additional doubled-quotes may be
20875 required: <itemizedlist>
20877 <para>"INSTID:12345,BASEBALL:Cubs,""BASEBALL:White Sox""" </para>
20879 </itemizedlist></para>
20882 <para>When replacing a patron record, any attributes specified in the input
20883 file replace all of the attribute values of any type that were previously
20884 assigned to the patron record. </para>
20886 </itemizedlist></para>
20892 <section id="importpatrons">
20893 <title><link linkend="importpatrons">Importing Patrons</link></title>
20895 <para>Once you have created your file, you can use the Patron Import
20896 Tool to bring the data into Koha.</para>
20900 <para>Choose your CSV file </para>
20902 <screeninfo>Import Patron Form</screeninfo>
20905 <imagedata fileref="images/tools/importpatrons/importpatrons.png"/>
20911 <para>Choose to match on 'Cardnumber' or 'Username' to prevent adding of duplicate
20912 card numbers to the system</para>
20914 <screeninfo>Patron match options</screeninfo>
20917 <imagedata fileref="images/tools/importpatrons/patronmatch.png"/>
20924 <para>Next you can choose default values to apply to all patrons
20925 you are importing</para>
20929 <para>ex. If you're importing patrons specific to one branch
20930 you can use the field on the Import form to apply the branch
20931 code to all those you are importing.</para>
20937 <para>Finally you need to decide on what data you want to
20938 replace if there are duplicates.</para>
20941 <screeninfo>If match found</screeninfo>
20945 <imagedata fileref="images/tools/importpatrons/patronmatching.png"/>
20952 <para>A matching record is found using the field you chose
20953 for matching criteria to prevent duplication</para>
20957 <para>If you included patron attributes in your file you can
20958 decide whether to add your values to existing values or
20959 erase existing values and enter only your new values.</para>
20967 <section id="notices">
20968 <title><link linkend="notices">Notices & Slips</link></title>
20972 <para><emphasis>Get there:</emphasis> More > Tools > Patrons
20973 and Circulation > Notices & Slips</para>
20977 <para>All notices and circulation receipts (or slips) generated by
20978 Koha can be customized using the Notices & Slips Tool. The system
20979 comes with several predefined templates that will appear when you
20980 first visit this tool.</para>
20983 <screeninfo>Notices & Slips Tool</screeninfo>
20987 <imagedata fileref="images/tools/notices/notices.png"/>
20992 <para>Each notice can be edited, but only a few can be deleted, this
20993 is to prevent system errors should a message try to send without a
20994 template. Each notice and slip can be edited on a per library basis,
20995 by default you will see the notices for all libraries.</para>
20997 <para>If you have a style you'd like applied to all slips you can
20998 point the <link linkend="SlipCSS">SlipCSS</link> preference to a
20999 stylesheet. The same is true for notices, using the <link linkend="NoticeCSS">NoticeCSS</link> preference to define a
21001 <para>You will also want to review the <link linkend="noticesfieldguide">Notices & Slips
21002 Field Guide</link> for more information on formatting these notices. </para>
21004 <section id="addnotices">
21005 <title><link linkend="addnotices">Adding Notices & Slips</link></title>
21007 <para>To add a new notice or slip</para>
21011 <para>Click 'New Notice'</para>
21014 <screeninfo>New Notice Form</screeninfo>
21018 <imagedata fileref="images/tools/notices/newnotice.png"/>
21025 <para>Choose which library this notice or slip is for<itemizedlist>
21028 <para>Not all notices can be branch specific for more information review the
21029 <link linkend="noticesfieldguide">Notices & Slips Field Guide</link>
21030 in this manual. </para>
21033 </itemizedlist></para>
21037 <para>Choose the module this notice is related to</para>
21041 <para>The Code is limited to 20 characters</para>
21046 <para>When working with the overdue notices you want each
21047 notice at each branch to have a unique code. Think about
21048 using the branch code in front of the notice code for each
21056 <para>Use the name field to expand on your Code</para>
21061 <para>With overdue notices, be sure to put your branch
21062 name in the description as well so that it will be visible
21063 when setting up your <link linkend="noticetriggers">triggers</link>.</para>
21070 <para>Next you can customize the notice for every possible delivery method<itemizedlist>
21072 <para>Every notice should have an Email template set for it<screenshot>
21073 <screeninfo>New Email notice</screeninfo>
21076 <imagedata fileref="images/tools/notices/newemail.png"/>
21079 </screenshot></para>
21082 <para>If you're using the <link linkend="TalkingTechItivaPhoneNotification">TalkingTechItivaPhoneNotification</link> service you can set up a Phone notification<screenshot>
21083 <screeninfo>New Phone notice</screeninfo>
21086 <imagedata fileref="images/tools/notices/newphone.png"/>
21089 </screenshot></para>
21092 <para>If you plan on printing this notice you can set the Print template next<screenshot>
21093 <screeninfo>New Print notice</screeninfo>
21096 <imagedata fileref="images/tools/notices/newprint.png"/>
21099 </screenshot></para>
21102 <para>If you have enabled SMS notices with the <link linkend="SMSSendDriver">SMSSendDriver</link> preference you can set the text for your SMS notices next<screenshot>
21103 <screeninfo>New SMS notice</screeninfo>
21106 <imagedata fileref="images/tools/notices/newsms.png"/>
21109 </screenshot></para>
21111 </itemizedlist></para>
21114 <para>Each notice offers you the same options<itemizedlist>
21116 <para>If you plan on writing the notice or slip in HTML check
21117 the 'HTML Message' box, otherwise the content will be generated
21118 as plain text</para>
21122 <para>Message Subject is what will appear in the subject line of
21127 <para>In the message body feel free to type whatever message you
21128 feel is best, use the fields on the left hand side to enter
21129 individualized data from the from database.</para>
21134 <para>Review the <link linkend="noticesfieldguide">Notices & Slip
21135 Field Guide</link> for info on what fields can be used here.</para>
21140 <para>Overdue notices can use <<items.content>> tags by themselves,
21141 or use <item></item> to span all of the tags. Learn more about the
21142 <link linkend="noticemarkup">Overdue Notice Markup</link></para>
21145 <para>On overdue notices make sure to use <<items.content>> tags
21146 to print out the data related to all items that are overdue.</para>
21151 <para>The other option, only for overdue notices, is to use the
21152 <item></item> tags to span the line so that it will print out
21153 multiple lines One example for the <item></item> tag option
21155 <para><item>"<<biblio.title>>" by
21156 <<biblio.author>>, <<items.itemcallnumber>>,
21157 Barcode: <<items.barcode>> , Checkout date:
21158 <<issues.issuedate>>, Due date:
21159 <<issues.date_due>> Fine: <<items.fine>> Due date:
21160 <<issues.date_due>> </item></para>
21167 <para>Only the overdue notices take advantage of the <item></item>
21168 tags, all other notices referencing items need to use
21169 <<items.content>></para>
21174 <para>To add today's date you can use the <<today>> syntax</para>
21179 <para>If you don't want to print the patron's full name on your slips or
21180 notice you can enter data in the Other name or Initials field for each
21181 patron and use that value instead.</para>
21186 </itemizedlist></para>
21190 <section id="noticemarkup">
21191 <title><link linkend="noticemarkup">Overdue Notice Markup</link></title>
21193 <para>When creating your overdue notices there are two tags in addition to the various
21194 database fields that you can use in your notices. You will also want to review the
21195 <link linkend="noticesfieldguide">Notices & Slips Field Guide</link> for
21196 information on formatting item information in these notices. <important>
21197 <para>These new tags only work on the overdue notices, not other circulation related
21198 notices at this time.</para>
21199 </important>These tags are <item> and </item> which should enclose all
21200 fields from the biblio, biblioitems, and items tables.</para>
21202 <para>An example of using these tags in a notice template might be like:</para>
21204 <programlisting> The following item(s) is/are currently overdue:
21206 <item>"<<biblio.title>>" by <<biblio.author>>, <<items.itemcallnumber>>, Barcode: <<items.barcode>> Fine: <<items.fine>></item></programlisting>
21208 <para>Which, assuming two items were overdue, would result in a notice
21209 like:<programlisting> The following item(s) is/are currently overdue:
21211 "A Short History of Western Civilization" by Harrison, John B, 909.09821 H2451, Barcode: 08030003 Fine: 3.50
21212 "History of Western Civilization" by Hayes, Carlton Joseph Huntley, 909.09821 H3261 v.1, Barcode: 08030004 Fine: 3.50</programlisting></para>
21216 <section id="existingnotices">
21217 <title><link linkend="existingnotices">Existing Notices & Slips</link></title>
21219 <para>Among the default notices are notices for several common actions within Koha. All of
21220 these notices can be customized by altering their text via the Notices & Slips tool
21221 and their style using the <link linkend="NoticeCSS">NoticeCSS</link> preference to
21222 define a stylesheet. You will also want to review the <link linkend="noticesfieldguide">Notices & Slips Field Guide</link> for information on formatting item information
21223 in these notices. Here are some of what those notices do:</para>
21227 <para id="ACCTDETAILS">ACCTDETAILS</para>
21231 <para>Sent to patrons when their account is set up if the
21232 <link linkend="AutoEmailOPACUser">AutoEmailOPACUser</link>
21233 preference is set to 'Send'</para>
21239 <para id="ACQCLAIM">ACQCLAIM (Acquisition Claim)</para>
21243 <para>Used in the claim acquisition module</para>
21247 <para><emphasis>Get there:</emphasis> More > Acquisitions
21248 > Late issues</para>
21253 <para>CHECKIN<itemizedlist>
21255 <para>This notice is sent as the 'Check in' notice for all items that are
21259 <para>This notice is used if two criteria are met:</para>
21262 <para>The <link linkend="EnhancedMessagingPreferences">EnhancedMessagingPreferences</link> is set to 'Allow'</para>
21265 <para>The patron has requested to receive this notice</para>
21268 <para><emphasis>Get there: </emphasis>OPAC > Login > my
21272 <para><emphasis>Get there: </emphasis>Staff Client > Patron Record
21273 > <link linkend="patnotices">Notices</link></para>
21279 </itemizedlist></para>
21282 <para>CHECKOUT<itemizedlist>
21284 <para>This notice is sent as the 'Check out' notice for all items that are
21288 <para>This notice is used if two criteria are met:</para>
21291 <para>The <link linkend="EnhancedMessagingPreferences">EnhancedMessagingPreferences</link> is set to 'Allow'</para>
21294 <para>The patron has requested to receive this notice</para>
21297 <para><emphasis>Get there: </emphasis>OPAC > Login > my
21301 <para><emphasis>Get there: </emphasis>Staff Client > Patron Record
21302 > <link linkend="patnotices">Notices</link></para>
21308 </itemizedlist></para>
21311 <para>DUE<itemizedlist>
21313 <para>This notice is sent as the 'Item due' for an item is due</para>
21316 <para>This notice is used if two criteria are met:</para>
21319 <para>The <link linkend="EnhancedMessagingPreferences">EnhancedMessagingPreferences</link> is set to 'Allow'</para>
21322 <para>The patron has requested to receive this notice</para>
21325 <para><emphasis>Get there: </emphasis>OPAC > Login > my
21329 <para><emphasis>Get there: </emphasis>Staff Client > Patron Record
21330 > <link linkend="patnotices">Notices</link></para>
21336 </itemizedlist></para>
21339 <para>DUEDGST<itemizedlist>
21341 <para>This notice is sent as the 'Item due' for all items that are due</para>
21344 <para>This notice is used if two criteria are met:</para>
21347 <para>The <link linkend="EnhancedMessagingPreferences">EnhancedMessagingPreferences</link> is set to 'Allow'</para>
21350 <para>The patron has requested to receive this notice as a digest</para>
21353 <para><emphasis>Get there: </emphasis>OPAC > Login > my
21357 <para><emphasis>Get there: </emphasis>Staff Client > Patron Record
21358 > <link linkend="patnotices">Notices</link></para>
21364 </itemizedlist></para>
21368 <para id="HOLDnotice">HOLD (Hold Available for Pickup)</para>
21372 <para>This notice is used if two criteria are met:</para>
21376 <para>The <link linkend="EnhancedMessagingPreferences">EnhancedMessagingPreferences</link>
21377 is set to 'Allow'</para>
21381 <para>The patron has requested to receive this
21386 <para><emphasis>Get there: </emphasis>OPAC >
21387 Login > my messaging</para>
21391 <para><emphasis>Get there: </emphasis>Staff Client
21392 > Patron Record > <link linkend="patnotices">Notices</link></para>
21400 <para>When this notice references the branches table it is
21401 referring to the pickup branch information.</para>
21407 <para id="HOLDPLACED">HOLDPLACED (a notice to the library staff
21408 that a hold has been placed)</para>
21412 <para>This notice requires the <link linkend="emailLibrarianWhenHoldIsPlaced">emailLibrarianWhenHoldIsPlaced</link>
21413 system preference to be set to 'Enable'</para>
21417 <para>When this notice references the branches table it is
21418 referring to the pickup branch information.</para>
21423 <para>MEMBERSHIP_EXPIRY<itemizedlist>
21425 <para>This notice can be sent to patrons to warn them that their cards are
21426 expiring soon.</para>
21429 <para>Requires that you have the <link linkend="MembershipExpiryDaysNotice">MembershipExpiryDaysNotice</link> set and the <link linkend="patronexpirycron">related cron job</link> set.</para>
21431 </itemizedlist></para>
21435 <para id="ODUE">ODUE (Overdue Notice)</para>
21439 <para>This notice is used to send Overdue Notices to
21444 <para>See a <link linkend="samplenotice">Sample Overdue
21445 Notice</link></para>
21449 <para>Requires that you set <link linkend="noticetriggers">Overdue Notice/Status
21450 Triggers</link></para>
21455 <para>PREDUE<itemizedlist>
21457 <para>This notice is sent as the 'Advanced notice' for an item is due</para>
21460 <para>This notice is used if two criteria are met:</para>
21463 <para>The <link linkend="EnhancedMessagingPreferences">EnhancedMessagingPreferences</link> is set to 'Allow'</para>
21466 <para>The patron has requested to receive this notice</para>
21469 <para><emphasis>Get there: </emphasis>OPAC > Login > my
21473 <para><emphasis>Get there: </emphasis>Staff Client > Patron Record
21474 > <link linkend="patnotices">Notices</link></para>
21480 </itemizedlist></para>
21483 <para>PREDUEDGST<itemizedlist>
21485 <para>This notice is sent as the 'Advanced notice' for all items that are
21489 <para>This notice is used if two criteria are met:</para>
21492 <para>The <link linkend="EnhancedMessagingPreferences">EnhancedMessagingPreferences</link> is set to 'Allow'</para>
21495 <para>The patron has requested to receive this notice as a digest</para>
21498 <para><emphasis>Get there: </emphasis>OPAC > Login > my
21502 <para><emphasis>Get there: </emphasis>Staff Client > Patron Record
21503 > <link linkend="patnotices">Notices</link></para>
21509 </itemizedlist></para>
21512 <para>RENEWAL<itemizedlist>
21514 <para>This notice is sent as the 'Check out' notice for all items that are
21518 <para>This notice is used if three criteria are met:</para>
21521 <para>The <link linkend="EnhancedMessagingPreferences">EnhancedMessagingPreferences</link> is set to 'Allow'</para>
21524 <para>The <link linkend="RenewalSendNotice">RenewalSendNotice</link>
21525 preference is set to 'Send'</para>
21528 <para>The patron has requested to receive the checkout notice</para>
21531 <para><emphasis>Get there: </emphasis>OPAC > Login > my
21535 <para><emphasis>Get there: </emphasis>Staff Client > Patron Record
21536 > <link linkend="patnotices">Notices</link></para>
21542 </itemizedlist></para>
21546 <para id="RLIST">RLIST (Routing List)</para>
21550 <para>Used in the serials module to notify patrons/staff of
21551 new issues of a serial</para>
21555 <para><emphasis>Get there:</emphasis> More > Serials
21556 > <link linkend="newsubscription">New
21557 Subscription</link></para>
21563 <para>You have the option to select the 'Routing List'
21564 notice when creating a new subscription (Choose from the
21565 'Patron notification' drop down).</para>
21570 <para>Notice also that if you'd like to notify patrons of
21571 new serial issues, you can click on 'define a notice'
21572 which will take you to the 'Notices' tool</para>
21578 <para>SHARE_ACCEPT<itemizedlist>
21580 <para>Used to notify a patron when another patron has accepted their shared
21584 <para>Requires that you set <link linkend="OpacAllowSharingPrivateLists">OpacAllowSharingPrivateLists</link> to 'Allow'</para>
21586 </itemizedlist></para>
21589 <para>SHARE_INVITE <itemizedlist>
21591 <para>Used to notify a patron that another patron would like to share a list
21595 <para>Requires that you set <link linkend="OpacAllowSharingPrivateLists">OpacAllowSharingPrivateLists</link> to 'Allow'</para>
21597 </itemizedlist></para>
21599 <listitem id="toprocessnotice">
21600 <para>TO_PROCESS<itemizedlist>
21602 <para>Used to notify a staff member if a purchase suggestion has been moved to
21603 the fund they manage</para>
21606 <para>Requires the <link linkend="emailsuggestfund">notice_unprocessed_suggestions</link> cron job</para>
21608 </itemizedlist></para>
21612 <para>There are also a set of predefined slips (or receipts) listed
21613 on this page. All of these slips can be customized by altering their
21614 text via the Notices & Slips tool and their style using the
21615 <link linkend="SlipCSS">SlipCSS</link> preference to define a
21616 stylesheet. Here is what those slips are used for:</para>
21620 <para>ISSUEQSLIP</para>
21624 <para>Used to print the quick slip in circulation</para>
21628 <para>The quick slip only includes items that were checked
21635 <para>ISSUESLIP</para>
21639 <para>Used to print a full slip in circulation</para>
21643 <para>The slip or receipt will show items checked out today
21644 as well as items that are still checked out</para>
21650 <para>HOLD_SLIP</para>
21654 <para>Used to print a holds slip</para>
21658 <para>The holds slip is generated when a hold is
21664 <para>TRANSFERSLIP</para>
21667 <para>Used to print a transfer slip</para>
21670 <para>The transfer slip is printed when you confirm a transfer from one branch to
21671 another in your system</para>
21679 <section id="noticetriggers">
21680 <title><link linkend="noticetriggers">Overdue Notice/Status Triggers</link></title>
21684 <para><emphasis>Get there:</emphasis> More > Tools > Patrons
21685 and Circulation > Overdue Notice/Status Triggers</para>
21689 <para>In order to send the overdue notices that you defined using the
21690 <link linkend="notices">Notices</link> tool, you need to first set the
21691 triggers to have these messages.</para>
21694 <para>In order to have overdue notices sent to your patrons, you
21695 need to <link linkend="addingpatroncat">set that patron
21696 category</link> to require overdue notices.</para>
21700 <para>Depending on the value of your <link linkend="OverdueNoticeCalendar">OverdueNoticeCalendar</link> preference the delay may or may not include days the
21701 library is closed based on the <link linkend="calholidays">holiday
21702 calendar</link>.</para>
21703 </important>The Overdue Notice/Status Triggers tool gives the librarian the power to send
21704 up to three notices to each patron type notifying them of overdue items</para>
21707 <screeninfo>Overdue Notice/Status Triggers Tool</screeninfo>
21711 <imagedata fileref="images/tools/triggers.png"/>
21718 <para>Delay is the number of days after an issue is due before an
21719 action is triggered.</para>
21724 <para>If you want Koha to trigger an action (send a letter
21725 or restrict member), a delay value is required.</para>
21732 <para>To send additional notices, click on the tabs for 'Second'
21733 and 'Third' notice</para>
21737 <para>If you would like to prevent a patron from checking items out because of their
21738 overdue items, check the 'Restrict' box, this will put a notice on the patron's record
21739 at checkout informing the librarian that the patron cannot check out due to overdue items.<itemizedlist>
21741 <para>If you choose to restrict a patron in this way you can also have Koha
21742 automatically remove that restriction with the <link linkend="AutoRemoveOverduesRestrictions">AutoRemoveOverduesRestrictions</link>
21745 </itemizedlist></para>
21749 <para>Next you can choose the delivery method for the overdue notice. You can choose
21750 from Email, Phone (if you are using the <link linkend="TalkingTechItivaPhoneNotification">iTiva Talking Tech service</link>),
21751 Print and SMS (if you have set your <link linkend="SMSSendDriver">SMSSendDriver</link>). <itemizedlist>
21754 <para>The Feed option is not yet a feature in Koha, it is there for future
21755 development.</para>
21758 </itemizedlist></para>
21761 <para>See a <link linkend="samplenotice">Sample Overdue Notice</link></para>
21766 <section id="patroncardcreator">
21767 <title><link linkend="patroncardcreator">Patron Card Creator</link></title>
21771 <para><emphasis>Get there:</emphasis> More > Tools > Patron Card Creator</para>
21775 <para>The Patron Card Creator allow you to use layouts and templates which you design to
21776 print your custom patron cards on your printer. Here are some of the features of the
21777 Patron Card Creator module:</para>
21781 <para>Customize patron card layouts with text retrieved from the Koha patron data</para>
21785 <para>Design custom card templates for printed patron cards (to match the label
21790 <para>Build and manage batches of patron cards to print</para>
21794 <para>Export (as PDF) single or multiple batches to print</para>
21798 <para>Export (as PDF) single or multiple patron cards from within a batch</para>
21801 <section id="cardlayouts">
21802 <title><link linkend="cardlayouts">Layouts</link></title>
21805 <para><emphasis>Get there:</emphasis> More > Tools > Patron Card Creator >
21806 Manage > Layouts</para>
21809 <para>A layout defines the text and images that will be printed on to the card and where
21810 it will appear. <note>
21811 <para>Up to three lines of text, the patron's number in barcode representation and up
21812 to two images can be printed on to the card.</para>
21814 <section id="addcardlayout">
21815 <title><link linkend="addcardlayout">Add a Layout</link></title>
21816 <para>If you have no layouts defined, you will add a new layout by clicking the 'New'
21817 button and choosing 'Layout'.<screenshot>
21818 <screeninfo>New layout button</screeninfo>
21821 <imagedata fileref="images/tools/patroncards/newlayout.png"/>
21824 </screenshot></para>
21825 <para>You may also choose to press 'Manage layout' on the left side. Here you are
21826 offered a list of available layouts you can select for editing. But at the top of the
21827 page there is still the 'New layout' button.</para>
21829 <screeninfo>Add New Layout</screeninfo>
21832 <imagedata fileref="images/tools/patroncards/addlayout.png"/>
21838 <para>The name you assign to the layout is for your benefit, name it something that
21839 will be easy to identify at a later date</para>
21842 <para>The Units pull down is used to define what measurement scale you're going to
21843 be using for your layout.</para>
21845 <screeninfo>Units of Measurement</screeninfo>
21848 <imagedata fileref="images/tools/patroncards/units.png"/>
21855 <para>A Postscript Point is 1/72" an Adobe Agate is 1/64", an Inch is 25.4 SI
21856 Millimeters </para>
21862 <para>Next note if this layout is for the front or the back of the patron
21868 <para>You will need a layout for both the front and back of your card if you
21869 have 2-sided library cards, this option doesn't allow you to print two
21870 sided cards, just lets you track which side of the card you're
21878 <para>You have the option of adding up to 3 lines of text to your card. Your text
21879 can be static text of your choosing and/or fields from the patron record. If you
21880 want to print fields from the patron record you want to put the field names in
21881 brackets like so - <firstname><itemizedlist>
21884 <para>A full list of field names can be found in the database schema at
21885 <ulink url="http://schema.koha-community.org">http://schema.koha-community.org</ulink></para>
21888 </itemizedlist></para>
21891 <para>For each line of text, you can choose your font, font size and the location of
21892 the text on the card using the lower X and Y coordinates</para>
21895 <para>In order to show the barcode and the patron card number you will need to check
21896 the 'Print Card Number as Barcode' option. This will turn the patron card number
21897 into a barcode. If you want the number to print in human readable format you will
21898 need to check the 'Print Card Number as Text Under Barcode' option.</para>
21901 <para>Finally you can choose up to two images to print on the card.</para>
21904 <para>One can be the <link linkend="uploadpatronimages">patron image</link>
21905 which you can resize to meet your needs.</para>
21908 <para>The other image can be something like a library logo or symbol that you
21909 uploaded using the '<link linkend="managecardimages">Manage Images</link>'
21910 module of the Patron Card Creator Tool.</para>
21916 <para>It is the designers responsibility to define textlines, barcode and images
21917 such that overlap is avoided.</para>
21918 </important>After saving, your layouts will appear on the 'Manage layouts'
21921 <screeninfo>Manage Layouts</screeninfo>
21924 <imagedata fileref="images/tools/patroncards/managelayouts.png"/>
21931 <section id="patrontemplate">
21932 <title><link linkend="patrontemplate">Templates</link></title>
21936 <para><emphasis>Get there:</emphasis> More > Tools > Patron Card Creator >
21937 Manage > Card templates</para>
21941 <para>A template describes the arrangement of labels on the label sheet/card stock you are
21942 using. This might be Avery 5160 for address labels, Gaylord 47-284 for spine labels or
21943 Avery 28371 for your patron cards, just to give a couple of examples. All of the
21944 information you will need for setting up a template may be on the packaging, and if not
21945 it can usually be found on the vendor's website or can be measured from a sample
21948 <section id="addcardtemplate">
21949 <title><link linkend="addcardtemplate">Add a Template</link></title>
21951 <para>To add a new template click on the 'New template' button at the top of your page
21952 which brings you to the Edit template form immediately. You may also choose to press
21953 'Manage templates' on the left side. Here you are offered a list of available
21954 templates you can select for editing. But in the top of the page there is still the
21955 'New template' button.</para>
21957 <screeninfo>New template button</screeninfo>
21960 <imagedata fileref="images/tools/patroncards/newtemplate.png"/>
21965 <para>Using the form that appears after pressing either 'Edit' or 'New template'you can
21966 define the template for your sheet of labels or cards. </para>
21969 <screeninfo>Add Patron Card Template</screeninfo>
21973 <imagedata fileref="images/tools/patroncards/edittemplate.png"/>
21980 <para>Template ID is simply a system generated unique id</para>
21984 <para>Template Code should be the name of this template to identify it on a list of
21989 <para>You can use the Template Description to add additional
21990 information about the template</para>
21994 <para>The Units pull down is used to define what measurement scale you're going to
21995 be using for the template. </para>
21997 <screeninfo>Measurement Units</screeninfo>
22000 <imagedata fileref="images/tools/patroncards/units.png"/>
22007 <para>A Postscript Point is 1/72" an Adobe Agate is 1/64", an Inch is 25.4 SI
22008 Millimeters </para>
22015 <para>The measurements (page height, page width, card width, card height) may be on
22016 the packaging, and if not it can usually be found on the vendor's website or can
22017 be measured from a sample sheet.</para>
22021 <para>A profile is a set of "adjustments" applied to a given template just prior to
22022 printing which compensates for anomalies unique and peculiar to a given printer
22023 (to which the profile is assigned). </para>
22027 <para>Before defining a profile try printing some sample cards so that you can
22028 take measurements to define a profile to perform the right adjustments for
22029 your printer/template combination.</para>
22033 <para>After finding and documenting any anomalies in the printed document, then
22034 you can <link linkend="addcardprofile">create a profile</link> and assign it
22035 to the template.</para>
22040 <para>Do not specify a profile unless needed, i.e. do not click to define a
22041 printer profile. It is not possible to remove a profile from a template
22042 but you can switch to another profile. </para>
22048 <para>If you are using different printers you may be required to define
22049 several templates that are identical only different profiles are
22057 <para>After saving, your templates will appear on the 'Manage templates' page.</para>
22060 <screeninfo>Manage Templates</screeninfo>
22064 <imagedata fileref="images/tools/patroncards/managetemplates.png"/>
22071 <section id="patronprofile">
22072 <title><link linkend="patronprofile">Profiles</link></title>
22076 <para><emphasis>Get there:</emphasis> More > Tools > Patron Card Creator >
22077 Manage > Profiles</para>
22081 <para>A profile is a set of "adjustments" applied to a given <link linkend="patrontemplate">template</link> just prior to printing which compensates for
22082 anomalies unique and peculiar to a given printer. This means if you set a template up
22083 and then print a sample set of data and find that the items are not all aligned the same
22084 on each card, you need to set up a profile for each printer (or even different tray
22085 selections on the same printer) to make up for the differences in printing styles, such
22086 as the shifting of text to the left, right, top or bottom.</para>
22088 <para>If your cards are printing just the way you want, you will not
22089 need a profile.</para>
22091 <section id="addcardprofile">
22092 <title><link linkend="addcardprofile">Add a Profile</link></title>
22094 <para>To add a new profile, you want to click on the 'Profiles'
22095 button at the top of your page and choose 'New Profile'</para>
22098 <screeninfo>New Profile Button</screeninfo>
22102 <imagedata fileref="images/tools/patroncards/newprofile.png"/>
22106 <para>To add a new profile, you want to click on the 'New profile' button at the top of
22107 your page. Using the form that appears you can define the values to correct the card
22108 misalignments on your label sheet. You may also choose 'Manage profiles' on the left
22109 side and select one of the currently available profiles for editing.</para>
22112 <screeninfo>Add Printer Profile</screeninfo>
22116 <imagedata fileref="images/tools/patroncards/addprofile.png"/>
22123 <para>The Printer Name and Paper Bin do not have to match your printer exactly, they
22124 are for your reference so you can remember what printer you have set the profile
22125 for. <itemizedlist>
22129 <para>For example: if you want to use the Printer model number in printer
22130 name you can, or you can call it 'the printer on my desk'</para>
22134 </itemizedlist></para>
22138 <para>Template will be filled in once you have chosen which
22139 template to apply the profile to on the <link linkend="addcardtemplate">template edit form</link></para>
22143 <para>The Units pull down is used to define what measurement
22144 scale you're going to be using for your profile.</para>
22147 <screeninfo>Units of Measurement</screeninfo>
22151 <imagedata fileref="images/tools/patroncards/units.png"/>
22158 <para>A Postscript Point is 1/72" an Adobe Agate is 1/64", an Inch is 25.4 SI
22159 Millimeters </para>
22166 <para>Offset should be used when the entire image is off center either vertically or
22167 horizontally. Creep describes a condition where the distance between the labels changes
22168 across the page or up and down the page<itemizedlist>
22170 <para>For offset and creep values, negative numbers move the printed
22171 information up and to the left on the printed sheet and positive numbers
22172 move down and to the right</para>
22175 <para>Example: the text is printed 0 .25" from the left edge of the first label,
22176 0 .28" from the left edge of the second label and 0 .31" from the left edge of
22177 the third label. This means the horizontal creep should be set to (minus)
22178 -0.03 " to make up for this difference.</para>
22180 </itemizedlist></para>
22184 <para>After saving, your profiles will appear on the 'Manage Printer Profiles'
22188 <screeninfo>Manage Profiles</screeninfo>
22192 <imagedata fileref="images/tools/patroncards/manageprofiles.png"/>
22197 <para>Once you have saved your new profile, you can return to the
22198 list of templates and choose to edit the template that this
22199 profile is for.</para>
22203 <section id="patroncardbatches">
22204 <title><link linkend="patroncardbatches">Batches</link></title>
22208 <para><emphasis>Get there:</emphasis> More > Tools > Patron Card Creator >
22209 Manage > Card batches</para>
22213 <para>A batch is a collection of patrons for whom you want to
22214 generate cards.</para>
22216 <section id="addcardbatch">
22217 <title><link linkend="addcardbatch">Add a Batch</link></title>
22219 <para>To add a new batch, you want to click on the 'New batches' button at the top of
22220 your page. Choosing the menu item 'Manage batches' on the left a list of already
22221 defined batches is displayed. In this display you can either select a batch for
22222 editing or add a new batch.</para>
22225 <screeninfo>New Batch Button</screeninfo>
22229 <imagedata fileref="images/tools/patroncards/newbatch.png"/>
22233 <para> For a new batch a message pops up and directs you to select patrons to be
22234 processed in this batch.<screenshot>
22235 <screeninfo>No items in batch</screeninfo>
22238 <imagedata fileref="images/tools/patroncards/noitemsbatch.png"/>
22241 </screenshot></para>
22243 <para>After choosing the 'Add item(s)' button the Patron Search window pops up.<screenshot>
22244 <screeninfo>Patron search</screeninfo>
22247 <imagedata fileref="images/tools/patroncards/patronsearch.png"/>
22250 </screenshot></para>
22251 <para>From here you can search for patrons to add to your batch by any part of their
22252 name, their category and/or library. Entering * in the search box will display all the
22253 patrons. <screenshot>
22254 <screeninfo>Patron search results</screeninfo>
22257 <imagedata fileref="images/tools/patroncards/addpatrons.png"/>
22260 </screenshot></para>
22261 <para>From the results you can add patrons to the batch by clicking the 'Add' button.
22262 After adding patrons from the results you can start over and perform another search or
22263 click 'Close' at the bottom of the screen to indicate that you are done. You will then
22264 be presented with your batch.<screenshot>
22265 <screeninfo>Patron batch</screeninfo>
22268 <imagedata fileref="images/tools/patroncards/batchsummary.png"/>
22271 </screenshot></para>
22272 <para>If you are satisfied with your batch you can proceed to export. If you want to
22273 correct or even delete that batch the buttons to do so can be found at the top of your
22274 screen. You can always come back here through the 'Manage > Card batches' button. </para>
22275 <para>If you would like to export all patron cards you can click 'Export card batch'
22276 otherwise you can choose specific patrons to print cards for by checking the box to
22277 the right of their names and then choose 'Export selected card(s)' at the top. </para>
22278 <para>The export menu will ask you to choose a template, a layout and starting position
22279 (where on the sheet should printing begin).<note>
22280 <para>For the starting position if the first 6 labels have already been used on your
22281 sheet you can start printing on label in position 7 on the sheet. The labels are
22282 numbered left to right from top to bottom.</para>
22283 </note><screenshot>
22284 <screeninfo>Export batch</screeninfo>
22287 <imagedata fileref="images/tools/patroncards/export.png"/>
22290 </screenshot></para>
22291 <para>Once you click 'Export' you will be presented with a PDF of your labels for printing<screenshot>
22292 <screeninfo>PDF Export</screeninfo>
22295 <imagedata fileref="images/tools/patroncards/pdf.png"/>
22298 </screenshot></para>
22299 <para>When you open the PDF you will see the cards for printing</para>
22301 <screeninfo>Final cards</screeninfo>
22304 <imagedata fileref="images/tools/patroncards/cards.png"/>
22308 <para>The above image shows a layout that is made up of two textlines. The first one is
22309 just plain text, the second one is composed of the <firstname> <surname> fields.
22310 A patron image is printed (if available) and the barcode of patrons number is
22311 displayed in code 39. All this is printed on a template with three columns and 8 rows
22312 using position 1-3 here. When printing this PDF please take care that your printer
22313 doesn't rescale the PDF (e.g do not fit to paper size) otherwise the printer will not
22314 be able to print to the right place per your templates.</para>
22318 <section id="managecardimages">
22319 <title><link linkend="managecardimages">Manage Images</link></title>
22323 <para><emphasis>Get there:</emphasis> More > Tools > Patron Card Creator >
22324 Manage > Images</para>
22328 <para>Images uploaded using this tool will appear on the menu when
22329 creating <link linkend="cardlayouts">patron card layouts</link>. You
22330 are limited in how many images you can upload (not counting patron
22331 images) by the <link linkend="ImageLimit">ImageLimit</link> system
22335 <para>Images must be under 500k in size.</para>
22339 <para>Pictures uploaded with this tool should be at least 300dpi
22340 which is the minimum quality for a printable image.</para>
22343 <para>In the center of the screen is a simple upload form, simply
22344 browse for the file on your computer and give it a name you'll
22345 recognize later.</para>
22348 <screeninfo>Upload Images</screeninfo>
22352 <imagedata fileref="images/tools/patroncards/imageupload.png"/>
22357 <para>Once the file is uploaded you will be presented with a
22358 confirmation message.</para>
22361 <screeninfo>Image Uploaded</screeninfo>
22365 <imagedata fileref="images/tools/patroncards/imageuploaded.png"/>
22370 <para>And the image will be listed with all of your others on the
22371 right hand side of the page.</para>
22374 <screeninfo>Images</screeninfo>
22378 <imagedata fileref="images/tools/patroncards/imagedelete.png"/>
22383 <para>To delete one or multiple of these images, click the checkbox
22384 to the right of each image you want to delete and click the 'Delete'
22389 <section id="anonpatrons">
22390 <title><link linkend="anonpatrons">Patrons (anonymize, bulk-delete)</link></title>
22394 <para><emphasis>Get there:</emphasis> More > Tools > Patrons
22395 and Circulation > Patrons (anonymize, bulk-delete)</para>
22398 <para>This tool allows you to bulk anonymize circulation histories (this means that you keep
22399 records of how many times items were checked out - but not the patrons who checked the
22400 items out) or bulk delete patrons (remove them from the system completely).<important>
22401 <para>Patrons with outstanding fines or items checked out are not saved. They are not
22402 completely removed from the system (they are only moved to the delete_borrowers
22403 table), but this tool does not provide as many checks as one may desire.</para>
22404 </important></para>
22406 <para>Before using this tool it is recommended that you backup your database. Changes made
22407 here are permanent.</para>
22410 <para>The anonymization will fail quietly if <link linkend="AnonymousPatron">AnonymousPatron</link> preference does not contain a valid value.</para>
22414 <screeninfo>Patron Anonymize/Bulk Delete Tool</screeninfo>
22418 <imagedata fileref="images/tools/anonymize/patronbulkdelete.png"/>
22423 <para>To either delete or anonymize patrons</para>
22427 <para>Check the 'Verify' box on the task you would like to complete (Delete or
22432 <para>Enter a date before which you want to alter the data</para>
22435 <para>If deleting patrons you can also choose to find patrons who<itemizedlist>
22437 <para>have not borrowed since a specific date</para>
22440 <para>have accounts that will expire before a specific date</para>
22443 <para>are in a specific <link linkend="patcats">patron category</link></para>
22446 <para>are in a <link linkend="patronlists">patron list</link></para>
22448 </itemizedlist></para>
22452 <para>Click 'Next'</para>
22456 <para>A confirmation will appear asking if you're sure this is
22457 what you want to happen</para>
22460 <screeninfo>Patron Anonymize/Bulk Delete
22461 Confirmation</screeninfo>
22465 <imagedata fileref="images/tools/anonymize/patronanonconfirm.png"/>
22472 <para>Clicking 'Finish' will delete or anonymize your data</para>
22475 <screeninfo>Completed Process</screeninfo>
22479 <imagedata fileref="images/tools/anonymize/patronanoncomplete.png"/>
22487 <section id="batchpatronmod">
22488 <title><link linkend="batchpatronmod">Batch patron modification</link></title>
22492 <para><emphasis>Get there:</emphasis> More > Tools > Patrons
22493 and Circulation > Batch patron modification</para>
22497 <para>With this tool you can make edits to a batch of patron records. Simply load in a file
22498 of cardnumbers (one per line), choose from a <link linkend="patronlists">list of
22499 patrons</link> or scan patron card numbers in to the box provided.</para>
22502 <screeninfo>Batch patron modification</screeninfo>
22506 <imagedata fileref="images/tools/batchpatron/batchmodify.png"/>
22511 <para>Once you have the file loaded or the barcodes scanned click
22512 'Continue.' You will be presented with a list of the patrons and the
22513 changes you can make.</para>
22516 <screeninfo>Patrons to modify</screeninfo>
22520 <imagedata fileref="images/tools/batchpatron/modifyform.png"/>
22525 <para>To the left of each text box there is a checkbox. Clicking that
22526 checkbox will clear our the field values. <important>
22527 <para>If the field is mandatory you will not be able to clear the
22528 value in it.</para>
22529 </important></para>
22531 <para>If you have multiple patron attributes you can change them all
22532 by using the plus (+) sign to the right of the text box. This will
22533 allow you to add another attribute value.</para>
22536 <screeninfo>Editing patron attributes</screeninfo>
22540 <imagedata fileref="images/tools/batchpatron/attributes.png"/>
22545 <para>Once you have made the changes you want, you can click 'Save'
22546 and Koha will present you with the changed patron records.</para>
22549 <section id="tagsmoderation">
22550 <title><link linkend="tagsmoderation">Tag Moderation</link></title>
22554 <para><emphasis>Get there:</emphasis> More > Tools > Patrons
22555 and Circulation > Tags</para>
22559 <para>Depending on your <link linkend="taggingprefs">tagging system preferences</link>,
22560 librarians may need to approve tags before they are published on the OPAC. This is done
22561 via the Tag Moderation Tool. If there are tags awaiting moderation they will be listed on
22562 the main staff dashboard under the module labels:</para>
22565 <screeninfo>Tags pending approval</screeninfo>
22569 <imagedata fileref="images/tools/tagging/pendingtags.png"/>
22574 <para>To moderate the tags visit the Tags tool. When first visiting
22575 the tool, you will be presented with a list of tags that are pending
22576 approval or rejection by a librarian</para>
22579 <screeninfo>Tags pending moderation</screeninfo>
22583 <imagedata fileref="images/tools/tagging/tagpending.png"/>
22590 <para>To see all of the titles this tag was added to simply click on the term<screenshot>
22591 <screeninfo>Titles with a specific tag</screeninfo>
22594 <imagedata fileref="images/tools/tagging/taggedtitles.png"/>
22597 </screenshot><itemizedlist>
22599 <para>From this list of titles you can remove a tag without outright rejecting it
22600 from being used in the future by clicking the 'Remove tag' button to the right
22601 of the title.</para>
22603 </itemizedlist></para>
22606 <para>To approve a tag, you can either click the 'Approve' button in line with the term,
22607 or check all terms you want to approve and click 'Approve' below the table.</para>
22611 <para>To reject a tag, you can either click the 'Reject' button in
22612 line with the term, or check all terms you want to approve and
22613 click 'Reject' below the table.</para>
22617 <para>Once a tag has been approved or rejected it will be moved to the
22618 appropriate list of tags. A summary of all tags will appear on the
22619 right of the screen.</para>
22622 <screeninfo>Summary of tags</screeninfo>
22626 <imagedata fileref="images/tools/tagging/tagsummary.png"/>
22631 <para>Even though a tag is approved or rejected, it can still be moved
22632 to another list. When viewing approved tags each tag has the option to
22636 <screeninfo>Approved Tags</screeninfo>
22640 <imagedata fileref="images/tools/tagging/tagapproved.png"/>
22645 <para>To check terms against the approved and rejected lists (and
22646 possibly against <link linkend="TagsExternalDictionary">the
22647 dictionary</link> you have assigned for tag moderation) simply enter
22648 the term into the search box on the bottom right of the screen to see
22649 the status of the term</para>
22652 <screeninfo>Sample Check list test search</screeninfo>
22656 <imagedata fileref="images/tools/tagging/tagblacklisttest-neither.png"/>
22660 <para>Finally you can find tags by using the filters on the left.</para>
22662 <screeninfo>Tag filters</screeninfo>
22665 <imagedata fileref="images/tools/tagging/tagfilters.png"/>
22671 <section id="uploadpatronimages">
22672 <title><link linkend="uploadpatronimages">Upload Patron Images</link></title>
22676 <para><emphasis>Get there:</emphasis> More > Tools > Patrons
22677 and Circulation > Upload Patron Images</para>
22681 <para>Patron images can be uploaded in bulk if you are <link linkend="patronimages">allowing patron images</link> to be attached to
22682 patron records. These images can also be used when creating <link linkend="patroncardcreator">patron cards</link>.</para>
22686 <para>Create a txt file and title it "DATALINK.TXT" or
22687 "IDLINK.TXT"</para>
22691 <para>On each line in the text file enter the patron's card number
22692 followed by comma (or tab) and then the image file name</para>
22695 <screeninfo>Sample file and image</screeninfo>
22699 <imagedata fileref="images/tools/patronphotos/uploadphotosfile.png"/>
22706 <para>Make sure that your TXT file is a plain text document,
22713 <para>Zip up the text file and the image files</para>
22717 <para>Go to the Upload Patron Images Tool</para>
22720 <screeninfo>Upload Image Tool for Single Image</screeninfo>
22724 <imagedata fileref="images/tools/patronphotos/uploadimagetool.png"/>
22731 <para>For a single image, simply point to the image file and enter
22732 the patron card number</para>
22736 <para>For multiple images, choose to upload a zip file</para>
22740 <para>After uploading you will be presented with a
22741 confirmation</para>
22744 <screeninfo>Image Upload Confirmation</screeninfo>
22748 <imagedata fileref="images/tools/patronphotos/imageuploadconfirm.png"/>
22756 <para>There is a limit of 100K on the size of the picture uploaded and it is recommended
22757 that the image be 200x300 pixels, but smaller images will work as well.</para>
22760 <section id="rotatingcollections">
22764 <firstname>Cindy</firstname>
22765 <surname>Murdock Ames</surname>
22767 <orgname>Meadville Public Library | CCFLS</orgname>
22771 <firstname>Nicole C.</firstname>
22772 <surname>Engard</surname>
22775 <pubdate>2014</pubdate>
22777 <title><link linkend="rotatingcollections">Rotating Collections</link></title>
22780 <para><emphasis>Get there:</emphasis> More > Tools > Catalog > Rotating
22784 <para>Rotating Collections is a tool for managing collections of materials that frequently
22785 get shifted from library to library. It adds the ability to store not only an item's home
22786 library and current location but also information about where it is supposed to be
22787 transferred to next to ensure that all items in the collection are sent to the correct
22788 library. When an item in a rotating collection is checked in, library staff is notified
22789 that the item is part of a rotating collection and which branch it should be sent to if it
22790 is not at the correct one.</para>
22792 <para>The <link linkend="AutomaticItemReturn">AutomaticItemReturn</link> system preference
22793 must be set to "Don't automatically transfer items to their home library when they are
22794 returned" for Rotating Collections to function properly.</para>
22798 <para>To create a new rotating collection, click the "New Collection" button, fill in
22799 the Title and Description, and click Submit. Once submitted you'll see "Collection
22800 Name added successfully"; click "Return to rotating collections home" to return to the
22801 main Rotating Collections management page (or click Rotating Collections in the
22805 <para>To add items to a collection, click "Add or remove items" next to the collection's
22806 name in the list of collections. Under "Add or remove items" scan or type in the
22807 barcode of the item you wish to add to the collection, and hit Enter or click Submit
22808 if necessary.</para>
22811 <para>To remove an item from a collection, either click Remove next to the item's
22812 barcode in the list of items within the collection or check the "Remove item from
22813 collection" box next to the Barcode text box under "Add or remove items, and scan or
22814 type in the barcode, clicking Submit or hitting Enter if necessary. Note: The "Remove
22815 item from collection" checkbox will remain checked as long as you are on the "Add or
22816 remove items" page, unless you uncheck it, to facilitate quickly removing a number of
22817 items at a time by scanning their barcodes. </para>
22820 <section id="transferrotatingcollection">
22821 <title><link linkend="transferrotatingcollection">Transfer a Rotating Collection</link></title>
22822 <para>Transferring a collection will:</para>
22825 <para>Change the current location of the items in that collection to the library it is
22826 to be transferred to</para>
22829 <para>Initiate a transfer from its original current location/holding library to the
22830 current location/holding library it is to be rotated to. When a library receives a
22831 collection they will need to check in the items to complete the transfer.</para>
22834 <para>You can transfer a collection in one of two ways:</para>
22837 <para>From the main Rotating Collections page, click on Transfer next to the title of
22838 the collection you wish to transfer; choose the library you wish to transfer the
22839 collection to and click "Transfer collection".</para>
22842 <para>Or, from the "add or remove items" page for a collection, you can click the
22843 Transfer button, choose the library you wish to transfer the collection to and click
22844 "Transfer Collection".</para>
22848 <para>In order to complete the transfer process, the library receiving the rotating
22849 collection should check in all items from the collection as they receive them. This
22850 will clear the transfer so that the items are no longer shown as being "in
22853 <para>If an item in a rotating collection is checked in at a library other than the one it
22854 is supposed to be transferred to, a notification will appear notifying library staff
22855 that the item is part of a rotating collection, also letting them know where the item
22856 needs to be sent.</para>
22858 <screeninfo>Rotating Collection Item Notification</screeninfo>
22861 <imagedata fileref="images/tools/rotatingcollections/rotatingcollectionnotice.png"/>
22871 <section id="catalogtools">
22872 <title><link linkend="catalogtools">Catalog</link></title>
22876 <section id="batchmodifyitems">
22877 <title><link linkend="batchmodifyitems">Batch item modification</link></title>
22881 <para><emphasis>Get there:</emphasis> More > Tools > Catalog
22882 > Batch item modification</para>
22886 <para>This tool will allow you to modify a batch of item records in
22890 <screeninfo>Batch Modification Tool</screeninfo>
22894 <imagedata fileref="images/tools/batchmod/batchmod.png"/>
22899 <para>From the tool you can choose to upload a file of barcodes or item ids, or you can scan
22900 items one by one into the box below the upload tool. You can also decide the items edited
22901 should be populated with the default values you have defined in your <link linkend="marcbibframeworks">default framework</link>.</para>
22902 <para>Once you have your file uploaded or the barcodes listed you can click
22906 <screeninfo>Batch Modify Summary</screeninfo>
22910 <imagedata fileref="images/tools/batchmod/batchmodsummary.png"/>
22915 <para>You will be presented with a summary of the items you want to modify. From here you
22916 can uncheck the items you don't want to modify before making changes in the form below.
22917 You can also hide columns you don't need to see to prevent having to scroll from left to
22918 right to see the entire item form.<note>
22919 <para>To uncheck all items thar are currently checked out you can click the 'Clear on
22920 loan' link at the top of the form.</para>
22923 <para>Using the edit form you can choose which fields to make edits
22924 to. By checking the checkbox to the right of each field you can clear
22925 the values in that field for the records you are modifying.</para>
22928 <screeninfo>Choose fields you want to change in bulk</screeninfo>
22932 <imagedata fileref="images/tools/batchmod/batchmodform.png"/>
22937 <para>Once you have made you changes you will be presented with the
22938 resulting items.</para>
22941 <screeninfo>Item results summary</screeninfo>
22945 <imagedata fileref="images/tools/batchmod/batchmodresults.png"/>
22951 <para>You can also edit items on one bib record in a batch by going
22952 to the bib record and clicking Edit > Edit items in batch</para>
22956 <screeninfo>Edit items in a batch</screeninfo>
22960 <imagedata fileref="images/tools/batchmod/editinbatch.png"/>
22966 <section id="batchdeleteitems">
22967 <title><link linkend="batchdeleteitems">Batch item deletion</link></title>
22971 <para><emphasis>Get there:</emphasis> More > Tools > Catalog
22972 > Batch item deletion</para>
22976 <para>This tool will allow you to delete a batch of item records from
22979 <para>From the tool you can choose to upload a file of barcodes or
22980 item ids, or you can scan items one by one into the box below the
22981 upload tool.</para>
22984 <screeninfo>Batch Deletion Tool</screeninfo>
22988 <imagedata fileref="images/tools/batchdelete/batchdel.png"/>
22993 <para>Once you have your file uploaded or the barcodes scanned you can
22994 click 'Continue.'</para>
22996 <para>You will be presented with a confirmation screen. From here you can uncheck the items
22997 you don't want to delete and decide if Koha should delete the bib record if the last item
22998 is being deleted before clicking 'Delete selected items.' If you'd like you can delete
22999 the bibliogrphic record if you're deleting the last item by clicking the checkbox next to
23000 'Delete records if no items remain'.</para>
23003 <screeninfo>Confirm Deletion</screeninfo>
23007 <imagedata fileref="images/tools/batchdelete/confirmbatchdel.png"/>
23012 <para>If your file (or list of scanned barcodes) has more than 1000
23013 barcodes, Koha will be unable to present you with a list of the items.
23014 You will still be able to delete them, but not able to choose which
23015 items specifically to delete or delete the biblio records.</para>
23018 <screeninfo>More than 1000 records in the file</screeninfo>
23022 <imagedata fileref="images/tools/batchdelete/toomanytodelete.png"/>
23027 <para>If the items are checked out you will be presented with an error
23028 after clicking 'Delete selected items' and the items will not be
23032 <screeninfo>Items not Deleted</screeninfo>
23036 <imagedata fileref="images/tools/batchdelete/nobatchdel.png"/>
23041 <para>If the items can be deleted they will be and you will be
23042 presented with a confirmation of your deletion.</para>
23045 <screeninfo>Batch Deletion Confirmation</screeninfo>
23049 <imagedata fileref="images/tools/batchdelete/batchdeldone.png"/>
23054 <section id="batchrecorddelete">
23055 <title><link linkend="batchrecorddelete">Batch record deletion</link></title>
23056 <para>This tool will take a batch of record numbers for either bibliographic records or
23057 authority records and allow you to delete all those records and any items attached to them
23058 in a batch. <screenshot>
23059 <screeninfo>Batch record deletion</screeninfo>
23062 <imagedata fileref="images/tools/batchrecorddel/tool.png"/>
23065 </screenshot></para>
23066 <para>First you need to tell the tool if you're deleting bibliographic or authority records.
23067 Next you can load a file with biblionumbers or authids or enter a list of those numbers in
23068 the box provided. Once you submit the form you will be presented with a summary of the
23069 records you are trying to delete.<screenshot>
23070 <screeninfo>Summary</screeninfo>
23073 <imagedata fileref="images/tools/batchrecorddel/summary.png"/>
23076 </screenshot></para>
23077 <para>If a record you want to delete can't be deleted it will be highlighted. </para>
23078 <para>Check the records you want to delete and click the 'Delete selected records' button to
23079 finish the process.</para>
23081 <section id="batchrecordmod">
23082 <title><link linkend="batchrecordmod">Batch Record Modification</link></title>
23085 <para><emphasis>Get there:</emphasis> More > Tools > Catalog > Batch record
23086 modification</para>
23089 <para>This tool will allow you to edit batches of bibliographic and/or authority records
23090 using <link linkend="marcmodtemplates">MARC Modification Templates</link>. Before visiting
23091 this tool you will want to set up at least one MARC modification template.</para>
23093 <screeninfo>Batch record modification</screeninfo>
23096 <imagedata fileref="images/tools/batchbibmod/batchbibmod.png"/>
23100 <para>When you visit the tool it will ask you:</para>
23103 <para>Choose whether you're editing bibliographic or authority records</para>
23106 <para>Enter the biblionumbers or authids<itemizedlist>
23108 <para>You can upload a file of these numbers or</para>
23111 <para>Enter the numbers (one per line) in the box provided</para>
23113 </itemizedlist></para>
23116 <para>Finally choose the MARC Modification Template you'd like to use to edit these
23120 <para>Once you've entered your critera click 'Continue'<screenshot>
23121 <screeninfo>Records to edit</screeninfo>
23124 <imagedata fileref="images/tools/batchbibmod/recordstoedit.png"/>
23127 </screenshot></para>
23128 <para>You will be presented with a list of records that will be edited. Next to each one is
23129 a checkbox so you can uncheck any items you would rather not edit at this time. </para>
23130 <para>Clicking Preview MARC will allow you to see what edits will be made when you finalize
23131 the edit.<screenshot>
23132 <screeninfo>Modified MARC Preview</screeninfo>
23135 <imagedata fileref="images/tools/batchbibmod/marcpreview.png"/>
23138 </screenshot></para>
23139 <para>Once you're sure everything is the way you want you can click the 'Modify selected
23140 records' button and your records will be modified.</para>
23142 <section id="autoitemagemod">
23143 <title><link linkend="autoitemagemod">Automatic item modifications by age</link></title>
23146 <para><emphasis>Get there:</emphasis> More > Tools > Catalog > Automatic item
23147 modifications by age</para>
23150 <para>This tool allows librarians to update item specific fields when an item reaches a
23151 certain age.</para>
23154 <para>Staff need the items_batchmod permission to access this tool</para>
23159 <para>The settings in this tool will be acted upon by the <link linkend="autoitemupdatecron">corresponding cron job</link></para>
23162 <para>To create a new rule click the 'Edit' button at the top of the page<screenshot>
23163 <screeninfo>Automatic item modifications by age</screeninfo>
23166 <imagedata fileref="images/tools/autoitemmodage/newrule.png"/>
23169 </screenshot></para>
23170 <para>In the form that appears you can set :<itemizedlist>
23172 <para>the age in days at which the item will update (Age)</para>
23175 <para>what criteria is needed to trigger the update (Conditions)</para>
23178 <para>what changes are made when the script runs (Substitutions)</para>
23183 <screeninfo>New rule</screeninfo>
23186 <imagedata fileref="images/tools/autoitemmodage/ruleform.png"/>
23190 <para>Once you're done you can click the 'Add this rule' link and then add additional rules
23191 or you can click the 'Submit these rules' button to save your changes.</para>
23193 <screeninfo>List of rules</screeninfo>
23196 <imagedata fileref="images/tools/autoitemmodage/savedrule.png"/>
23202 <section id="exportbibs">
23203 <title><link linkend="exportbibs">Export Data (MARC & Authorities)</link></title>
23207 <para><emphasis>Get there:</emphasis> More > Tools > Catalog
23208 > Export Data</para>
23212 <para>Koha comes with a tool that will allow you to export your
23213 bibliographic, holdings and/or authority data in bulk. This can be
23214 used to send your records to fellow libraries, organizations or
23215 services; or simply for backup purposes.</para>
23217 <section id="exportmarc">
23218 <title><link linkend="exportmarc">Export Bibliographic Records</link></title>
23220 <para>At the top of the screen you need to pick what data you're
23221 exporting. If you're exporting bibliographic records with or without
23222 the holdings information you want to click the 'Export bibliographic
23223 records' tab.</para>
23227 <para>Fill in the form in order to limit your export to a
23228 specific range (all fields are optional)</para>
23231 <screeninfo>Select Records to Export</screeninfo>
23235 <imagedata fileref="images/tools/exportmarc/marcexport-pt1.png"/>
23242 <para>Choose to limit your export by any one or more of the
23243 following options</para>
23247 <para>Limit to a bib number range</para>
23251 <para>Limit to a specific item type<itemizedlist>
23254 <para>This limit will use the type you have defined in the <link linkend="item-level_itypes">item-level_itypes</link> preference.
23255 If you have the item-level_itypes preference set to 'specific item'
23256 and you have no items attached to a bib record it will not be
23257 exported. To get all bib records of a specific type you will need
23258 your item-level_itypes preference set to 'biblio record'.</para>
23261 </itemizedlist></para>
23265 <para>Limit to a specific library or group of libraries</para>
23269 <para>Limit to a call number range</para>
23273 <para>Limit to an acquisition date range</para>
23279 <para>If you'd like you can load a file of biblionumbers for the records you would
23280 like to export</para>
23282 <screeninfo>File of Records to Export</screeninfo>
23285 <imagedata fileref="images/tools/exportmarc/fileexport.png"/>
23291 <para>Next choose what to skip when exporting</para>
23293 <screeninfo>Export options</screeninfo>
23296 <imagedata fileref="images/tools/exportmarc/marcexport-pt2.png"/>
23302 <para>By default items will be exported, if you would like to only export
23303 bibliographic data, check the 'Don't export items' box</para>
23306 <para>To limit your export only to items from the library you're logged in as
23307 (if you leave the 'Library' field set to 'All') or to the library you
23308 selected above check the 'Remove non-local items' box</para>
23311 <para>You can also choose what fields you don't want to export. This can be
23312 handy if you're sharing your data, you can remove all local fields before
23313 sending your data to another library</para>
23319 <para>Finally choose the file type and file name</para>
23322 <screeninfo>File export format</screeninfo>
23326 <imagedata fileref="images/tools/exportmarc/marcexport-pt3.png"/>
23333 <para>Choose to export your data in marc or marcxml
23338 <para>Choose the name you want your file to save
23345 <para>Click 'Export bibliographic records'</para>
23352 <section id="exportauthority">
23353 <title><link linkend="exportauthority">Export Authority Records</link></title>
23355 <para>At the top of the screen you need to pick what data you're
23356 exporting. If you're exporting authority records you want to click
23357 the 'Export authority records' tab.</para>
23361 <para>Fill in the form in order to limit your export to a
23362 specific range or type of authority record (all fields are
23366 <screeninfo>Export authorities</screeninfo>
23370 <imagedata fileref="images/tools/exportmarc/authexport-pt1.png"/>
23377 <para>Or you can choose a file of authids to export<screenshot>
23378 <screeninfo>Authorities file</screeninfo>
23381 <imagedata fileref="images/tools/exportmarc/authexport-pt1-5.png"/>
23384 </screenshot></para>
23387 <para>Next choose fields that you would like to exclude from the export separated by a
23388 space (no commas)</para>
23390 <screeninfo>Authority export options</screeninfo>
23393 <imagedata fileref="images/tools/exportmarc/authexport-pt2.png"/>
23399 <para>If you'd like to exclude all subfields of the 200 for example just enter
23403 <para>If you'd like to exclude a specific subfield enter it beside the field value
23404 100a will exclude just the subfield 'a' of the 100</para>
23410 <para>Finally choose the file type and file name</para>
23413 <screeninfo>Export format</screeninfo>
23417 <imagedata fileref="images/tools/exportmarc/authexport-pt3.png"/>
23424 <para>Choose to export your data in marc or marcxml
23429 <para>Choose the name you want your file to save as</para>
23435 <para>Click 'Export authority records'</para>
23441 <section id="inventory">
23442 <title><link linkend="inventory">Inventory/Stocktaking</link></title>
23446 <para><emphasis>Get there:</emphasis> More > Tools > Catalog
23447 > Inventory/Stocktaking</para>
23451 <para>Koha's Inventory Tool can be used in one of two ways, the first
23452 is by printing out a shelf list that you can then mark items off on,
23453 or by uploading a text files of barcodes gathered by a portable
23456 <para>If you do not have the ability to use your barcode scanner on
23457 the floor of the library, the first option available to you is to
23458 generate a shelf list based on criteria you enter.</para>
23461 <screeninfo>Inventory & Stocktaking Tool</screeninfo>
23465 <imagedata fileref="images/tools/inventory/generateshelflist.png"/>
23470 <para>Choose which library, shelving location, call number range, item
23471 status and when the item was last seen to generate a shelf list that
23472 you can then print to use while walking around the library checking
23473 your collection</para>
23476 <screeninfo>Shelf List</screeninfo>
23480 <imagedata fileref="images/tools/inventory/shelflist.png"/>
23485 <para>Alternatively you can export the list to a CSV file for altering
23486 in an application on your desktop. Simply check the box next to
23487 'Export to csv file' to generate this file.</para>
23489 <para>Once you have found the items on your shelves you can return to
23490 this list and check off the items you found to have the system update
23491 the last seen date to today.</para>
23493 <para>If you have a portable scanner (or a laptop and USB scanner) you
23494 can walk through the library with the scanner in hand and scan
23495 barcodes as you come across them. Once finished you can then upload
23496 the text file generated by the scanner to Koha</para>
23499 <screeninfo>Barcode Import for Inventory Tool</screeninfo>
23503 <imagedata fileref="images/tools/inventory/importbarcodes.png"/>
23508 <para>Choose the text file and the date you want to mark all items as seen and then scroll
23509 to the very bottom and click 'Submit.'</para>
23512 <section id="labelcreator">
23513 <title><link linkend="labelcreator">Label Creator</link></title>
23517 <para><emphasis>Get there:</emphasis> More > Tools > Catalog
23518 > Label Creator</para>
23522 <para>The Label Creator allow you to use layouts and templates which
23523 you design to print a nearly unlimited variety of labels including
23524 barcodes. Here are some of the features of the Label Creator
23529 <para>Customize label layouts</para>
23533 <para>Design custom label templates for printed labels</para>
23537 <para>Build and manage batches of labels</para>
23541 <para>Export single or multiple batches</para>
23545 <para>Export single or multiple labels from within a batch</para>
23549 <para>Export label data in one of three formats:</para>
23553 <para>PDF - Readable by any standard PDF reader, making labels
23554 printable directly on a printer</para>
23558 <para>CSV - Export label data after your chosen layout is
23559 applied allowing labels to be imported in to a variety of
23560 applications</para>
23564 <para>XML - Included as an alternate export format</para>
23570 <section id="labeltemplates">
23571 <title><link linkend="labeltemplates">Templates</link></title>
23575 <para><emphasis>Get there:</emphasis> More > Tools > Label Creator > Manage >
23576 Label templates</para>
23580 <para>A template is based on the label/card stock you are using.
23581 This might be Avery 5160 for address labels, Gaylord 47-284 for
23582 spine labels or Avery 28371 for your patron cards, just to give a
23583 couple of examples. These labels will include all of the information
23584 you will need for setting up a Koha, this information may be on the
23585 packaging, and if not it can usually be found on the vendor's
23588 <section id="addlabeltemplate">
23589 <title><link linkend="addlabeltemplate">Add a Template</link></title>
23591 <para>To add a new template, you want to click on the 'New' button at the top of the
23592 Label Creator and choosing 'Label template'.</para>
23595 <screeninfo>New Label Template Option</screeninfo>
23599 <imagedata fileref="images/tools/labelcreator/newtemplate.png"/>
23604 <para>Using the form that appears you can define the template for
23605 your sheet of labels or cards.</para>
23608 <screeninfo>Label Template Form</screeninfo>
23612 <imagedata fileref="images/tools/labelcreator/labelform.png"/>
23619 <para>Template ID will be automatically generated after saving
23620 your template, this is simply a system generated unique
23625 <para>Template Code should be something you can use to
23626 identify your template on a list of templates</para>
23630 <para>You can use the Template Description to add additional
23631 information about the template</para>
23635 <para>The Units pull down is used to define what measurement
23636 scale you're going to be using for the template. This should
23637 probably match the unit of measurement used on the template
23638 description provided by the product vendor.</para>
23641 <screeninfo>Measurement Units</screeninfo>
23645 <imagedata fileref="images/tools/patroncards/units.png"/>
23652 <para>The measurements, number of columns and number of rows
23653 can be found on the vendor product packaging or
23659 <para>If you do not supply a left text margin in the
23660 template, a 3/16" (13.5 point) left text margin will
23661 apply by default.</para>
23668 <para>A profile is a set of "adjustments" applied to a given
23669 template just prior to printing which compensates for
23670 anomalies unique and peculiar to a given printer (to which the
23671 profile is assigned).</para>
23675 <para>Before picking a profile try printing some sample
23676 labels so that you can easily define a profile that is
23677 right for your printer/template combination.</para>
23681 <para>After finding any anomalies in the printed document,
23682 <link linkend="addlabelprofile">create a profile</link>
23683 and assign it to the template.</para>
23689 <para>After saving, your templates will appear on the 'Manage' area under 'Label
23693 <screeninfo>List of label templates</screeninfo>
23697 <imagedata fileref="images/tools/labelcreator/labeltemplates.png"/>
23704 <section id="labelprofiles">
23705 <title><link linkend="labelprofiles">Profiles</link></title>
23709 <para><emphasis>Get there:</emphasis> More > Tools > Label Creator > Manage >
23710 Printer Profiles</para>
23714 <para>A profile is a set of "adjustments" applied to a given <link linkend="addlabeltemplate">template</link> just prior to printing
23715 which compensates for anomalies unique and peculiar to a given
23716 printer (to which the profile is assigned). This means if you set a
23717 template up and then print a sample set of data and find that the
23718 items are not all aligned the same on each label, you need to set up
23719 a profile for each printer to make up for the differences in
23720 printing styles, such as the shifting of text to the left, right,
23721 top or bottom.</para>
23723 <para>If your labels are printing just the way you want, you will
23724 not need a profile.</para>
23726 <section id="addlabelprofile">
23727 <title><link linkend="addlabelprofile">Add a Profile</link></title>
23729 <para>To add a new profile, you want to click on the 'New' button at the top of the
23730 Label Creator tool and choose 'Printer profile'.</para>
23733 <screeninfo>New Profile Button</screeninfo>
23737 <imagedata fileref="images/tools/labelcreator/newprofile.png"/>
23742 <para>Using the form that appears you can create a profile to fix
23743 any problems with your template.</para>
23746 <screeninfo>Create a Printer Profile</screeninfo>
23750 <imagedata fileref="images/tools/labelcreator/newprofileform.png"/>
23757 <para>The Printer Name and Paper Bin do not have to match your
23758 printer exactly, they are for your reference so you can
23759 remember what printer you have set the profile for. So if you
23760 want to use the Printer model number in printer name or you
23761 can call it 'the printer on my desk'</para>
23765 <para>Template will be filled in once you have chosen which
23766 template to apply the profile to on the <link linkend="addlabeltemplate">template edit form</link></para>
23770 <para>The Units pull down is used to define what measurement
23771 scale you're going to be using for your profile.</para>
23774 <screeninfo>Units of Measurement</screeninfo>
23778 <imagedata fileref="images/tools/patroncards/units.png"/>
23785 <para>Offset describes what happens when the entire image is
23786 off center either vertically or horizontally and creep
23787 describes a condition where the distance between the labels
23788 changes across the page or up and down the page</para>
23792 <para>For these values, negative numbers move the error up
23793 and to the left and positive numbers move the error down
23794 and to the right</para>
23798 <para>Example: the text is .25" from the left edge of the
23799 first label, .28" from the left edge of the second label
23800 and .31" from the left edge of the third label. This means
23801 the horizontal creep should be set to .03" to make up for
23802 this difference.</para>
23808 <para>After saving, your profiles will appear on the 'Manage' area under 'Printer
23812 <screeninfo>List of Profiles</screeninfo>
23816 <imagedata fileref="images/tools/labelcreator/profiles.png"/>
23821 <para>Once you have saved your new profile, you can return to the
23822 list of templates and choose to edit the template that this
23823 profile is for.</para>
23827 <section id="labellayouts">
23828 <title><link linkend="labellayouts">Layouts</link></title>
23832 <para><emphasis>Get there:</emphasis> More > Tools > Label Creator > Manage >
23837 <para>A layout is used to define the fields you want to appear on
23838 your labels.</para>
23840 <section id="addlabellayout">
23841 <title><link linkend="addlabellayout">Add a Layout</link></title>
23843 <para>To add a new layout, you want to click on the 'New' button at the top of the Label
23844 Creator tool and choose 'Layout'.</para>
23847 <screeninfo>New Layout Button</screeninfo>
23851 <imagedata fileref="images/tools/labelcreator/newlayout.png"/>
23856 <para>Using the form that appears you can create a profile to fix
23857 any problems with your template.</para>
23860 <screeninfo>Add New Layout</screeninfo>
23864 <imagedata fileref="images/tools/labelcreator/layoutform.png"/>
23871 <para>The name of your layout can be anything you'd like to
23872 help you identify it later.</para>
23876 <para>If this is a barcode label you'll want to choose the
23877 encoding (Code 39 is the most common)</para>
23881 <para>The layout type can be any combination of bibliographic
23882 information and/or barcode. For example a spine label would
23883 just be Biblio whereas a label for your circulation staff to
23884 use to checkout the book would probably be
23885 Biblio/Barcode.</para>
23889 <para>The Bibliographic Data to Print includes any of the data
23890 fields that may be mapped to your MARC frameworks. You can
23891 choose from the preset list of fields or you can click on
23892 'List Fields' and enter your own data. In 'List Fields', you
23893 can specify MARC subfields as a 4-character tag-subfield
23894 string: (ie. 254a for the title field), You can also enclose a
23895 whitespace-separated list of fields to concatenate on one line
23896 in double quotes. (ie. "099a 099b" or "itemcallnumber
23897 barcode"). The fields available are from the database tables
23898 list below. Finally you could add in static text strings in
23899 single-quote (ie. 'Some static text here.')</para>
23903 <para>You can use the schema viewer (<ulink url="http://schema.koha-community.org">http://schema.koha-community.org</ulink>)
23904 with the following tables to find field names to
23909 <para>Currently all fields in the following tables are
23910 used: items, biblioitems, biblio, branches</para>
23913 <screeninfo>List fields</screeninfo>
23917 <imagedata fileref="images/tools/labelcreator/listlabelfields.png"/>
23928 <para>Choose if the label maker should print out the
23929 guidelines around each label</para>
23933 <para>Choose if you'd like Koha to try to split your call
23934 numbers (usually used on Spine Labels)</para>
23938 <para>Finally choose your text settings such as alignment,
23939 font type and size.</para>
23943 <para>After saving, your layouts will appear on the 'Manage
23944 Layouts' page.</para>
23948 <section id="labelbatches">
23949 <title><link linkend="labelbatches">Batches</link></title>
23953 <para><emphasis>Get there:</emphasis> More > Tools > Label Creator > Manage >
23954 Label batches</para>
23958 <para>Batches are made up of the barcodes you would like to print.
23959 Once in this tool you can search for the item records you would like
23960 to print out labels for.</para>
23962 <section id="addlabelbatch">
23963 <title><link linkend="addlabelbatch">Add a Batch</link></title>
23965 <para>Batches can be created in one of two ways. The first is to
23966 click the 'Create Label Batch' link on the '<link linkend="managestaged">Staged MARC Management</link>' page:</para>
23969 <screeninfo>Create Label Batch Link on Staged Records
23974 <imagedata fileref="images/tools/labelcreator/labelfromstaged.png"/>
23979 <para>The other is to choose to create a new batch from the label
23980 creator tool</para>
23983 <screeninfo>Create New Batch</screeninfo>
23987 <imagedata fileref="images/tools/labelcreator/newbatch.png"/>
23992 <para>You will be brought to an empty batch with a box to scan barcodes or itemnumbers
23993 in to and an 'Add item(s)' button at the bottom of the page.</para>
23996 <screeninfo>Add Items</screeninfo>
24000 <imagedata fileref="images/tools/labelcreator/addbatchitems.png"/>
24005 <para>You can either scan barcodes in to the box provided and
24006 click the 'Add item(s)' button or you can click the 'Add item(s)'
24007 button with the barcodes box empty. Clicking 'Add item(s)' with
24008 nothing in the barcodes box will open a search window for you to
24009 find the items you want to add to the batch.</para>
24012 <screeninfo>Search for items for a Batch</screeninfo>
24016 <imagedata fileref="images/tools/labelcreator/searchforbatch.png"/>
24021 <para>From the search results, click the check box next to the
24022 items you want to add to the batch and click the 'Add checked'
24023 button. You can also add items one by one by clicking the 'Add'
24024 link to the left of each item.</para>
24027 <screeninfo>Batch search results</screeninfo>
24031 <imagedata fileref="images/tools/labelcreator/batchsearchresults.png"/>
24036 <para>Once you have added all of the items click the 'Done'
24037 button. The resulting page will list the items you have
24041 <screeninfo>List of items in the batch</screeninfo>
24045 <imagedata fileref="images/tools/labelcreator/itemsinbarch.png"/>
24050 <para>To print your labels, click the 'Export full batch' button. To print only some of
24051 the labels, click the 'Export selected item(s)' button. Either way you will be
24052 presented with a confirmation screen where you can choose your template and
24056 <screeninfo>Start batch export</screeninfo>
24060 <imagedata fileref="images/tools/labelcreator/exportbatch.png"/>
24065 <para>You will then be presented with three download options: PDF,
24066 Excel, and CSV.</para>
24069 <screeninfo>Batch save options</screeninfo>
24073 <imagedata fileref="images/tools/labelcreator/savebatch.png"/>
24078 <para>After saving your file, simply print to the blank labels you
24079 have in your library.</para>
24084 <section id="quicklabelcreator">
24085 <title><link linkend="quicklabelcreator">Quick Spine Label Creator</link></title>
24089 <para><emphasis>Get there:</emphasis> More > Tools > Catalog
24090 > Quick Spine Label Creator</para>
24095 <para>This tool does not use the label layouts or templates, it
24096 simply prints a spine label in the first spot on the label
24101 <para>Define the fields you want to print on the spine label in
24102 the <link linkend="SpineLabelFormat">SpineLabelFormat</link>
24103 system preference</para>
24107 <para>Format your label printing by editing spinelabel.css found
24108 in koha-tmpl/intranet-tmpl/prog/en/css/</para>
24113 <para>To use this tool you simply need the barcode for the book you'd
24114 like to print the spine label for.</para>
24117 <screeninfo>Quick Spine Label Creator</screeninfo>
24121 <imagedata fileref="images/tools/quickspinelable.png"/>
24126 <section id="marcmodtemplates">
24127 <title><link linkend="marcmodtemplates">MARC modification templates</link></title>
24128 <para>The MARC Modification Templates system gives Koha users the power to make alterations
24129 to MARC records automatically while staging MARC records for import. </para>
24130 <para>This tool is useful for altering MARC records from various venders/sources work with
24131 your MARC framework. The system essentially allows one to create a basic script using
24132 actions to Copy, Move, Add, Update and Delete fields. </para>
24133 <para>Start by adding a new template (a template can be made up of one or more actions) by
24134 entering a name and clicking 'Create template'.</para>
24136 <screeninfo>Add a new template</screeninfo>
24139 <imagedata fileref="images/tools/marcmodtemplates/addtemplate.png"/>
24143 <para>Next you can add actions to the template by filling in the Action box. For example if
24144 you're loading in a batch of files from your EBook vendor you might want to add the biblio
24145 item type of EBOOK to the 942$c.<screenshot>
24146 <screeninfo>Add action</screeninfo>
24149 <imagedata fileref="images/tools/marcmodtemplates/addaction.png"/>
24152 </screenshot><itemizedlist>
24154 <para>Choose 'Add/Update'</para>
24157 <para>Enter the field 942 and subfield c</para>
24160 <para>Enter the value of 'EBOOK' (or whatever your ebook item type code is)</para>
24163 <para>Provide a description so you can identify this action later</para>
24166 <para>Click 'Add action'</para>
24168 </itemizedlist></para>
24169 <para>Each action can also have an optional condition to check the value or existance of
24170 another field. For example you might want to add the call number to the item record if
24171 it's not already there.</para>
24173 <screeninfo>Add conditional action</screeninfo>
24176 <imagedata fileref="images/tools/marcmodtemplates/ifexample.png"/>
24182 <para>Choose 'Copy'</para>
24185 <para>Decide if you want to copy the first occurance or all occurances of the
24189 <para>Enter the field 090 (or other biblio call number field) and subfield a to
24193 <para>Enter the 952 field and o subfield to copy to</para>
24196 <para>Choose 'if'</para>
24199 <para>Enter the 952 field and o subfield</para>
24202 <para>Choose "doesn't exist"</para>
24205 <para>Provide a description so you can identify this action later</para>
24208 <para>Click 'Add action'</para>
24211 <para>The Copy & Move actions also support Regular Expressions, which can be used to
24212 automatically modify field values during the copy/move. An example would be to strip out
24213 the '$' character in field 020$c.</para>
24215 <screeninfo>Add regex action</screeninfo>
24218 <imagedata fileref="images/tools/marcmodtemplates/regexexample.png"/>
24224 <para>Choose 'Copy and replace'</para>
24227 <para>Decide if you want to copy the first occurance or all occurances of the
24231 <para>Enter the field 020 and subfield c to copy</para>
24234 <para>Enter the 020 field and c subfield to copy to</para>
24237 <para>Check the 'RegEx' box and enter your regular expression (in this case s/\$//
24241 <para>Choose 'if'</para>
24244 <para>Enter the 020 field and c subfield</para>
24247 <para>Choose "matches"</para>
24250 <para>Check the 'RegEx' box and enter your regular expression (in this case m/^\$/
24254 <para>Provide a description so you can identify this action later</para>
24257 <para>Click 'Add action'</para>
24261 <para>The value for an update can include variables that change each time the template is
24262 used. Currently, the system supports two variables, __BRANCHCODE__ which is replaced
24263 with the branchcode of the library currently using the template, and __CURRENTDATE__
24264 which is replaced with the current date in ISO format ( YYYY-MM-DD ).</para>
24266 <para>You could also use regular expressions to add your library's proxy URL in front of
24267 links in your MARC record.<screenshot>
24268 <screeninfo>Add proxy URL</screeninfo>
24271 <imagedata fileref="images/tools/marcmodtemplates/proxyurl.png"/>
24274 </screenshot><itemizedlist>
24276 <para>Choose 'Copy and replace'</para>
24279 <para>Decide if you want to copy the first occurance or all occurances of the
24283 <para>Enter the field 856 and subfield u to copy</para>
24286 <para>Enter the 856 field and u subfield to copy to</para>
24289 <para>Check the 'RegEx' box and enter your regular expression (in this case
24290 s/^/PROXY_URL/ )</para>
24293 <para>Provide a description so you can identify this action later</para>
24296 <para>Click 'Add action'</para>
24298 </itemizedlist></para>
24299 <para>When choosing between 'Copy' and 'Copy and replace' keep the following example in
24301 <programlisting>245 _aThe art of computer programming _cDonald E. Knuth.
24302 300 _aA_exists _bB_exists </programlisting>
24303 <para>If we apply action (a) Copy the whole field 245 to 300, we get: </para>
24304 <programlisting>245 _aThe art of computer programming _cDonald E. Knuth.
24305 300 _aA_exists _bB_exists
24306 300 _aThe art of computer programming _cDonald E. Knuth. </programlisting>
24307 <para>If we apply action (b) Copy the subfield 245$a to 300$a, we get: </para>
24308 <programlisting>245 _aThe art of computer programming _cDonald E. Knuth.
24309 300 _aThe art of computer programming _bB_exists</programlisting>
24310 <para>Once your actions are saved you can view them at the top of the screen. Actions can be
24311 moved around using the arrows to the left of them. </para>
24313 <screeninfo>View actions</screeninfo>
24316 <imagedata fileref="images/tools/marcmodtemplates/viewactions.png"/>
24320 <para>Depending on your actions the order may be very important. For example you don't want
24321 to delete a field before you copy it to another field.</para>
24322 <para>To add another template you can either start fresh or click the 'Duplicate current
24323 template' checkbox to create a copy of an existing template to start with.</para>
24325 <screeninfo>Duplicate template</screeninfo>
24328 <imagedata fileref="images/tools/marcmodtemplates/duplicate.png"/>
24332 <para>Once your template is saved you will be able to pick it when using the <link linkend="stagemarc">Stage MARC Records for Import</link> tool.</para>
24334 <screeninfo>Choose template</screeninfo>
24337 <imagedata fileref="images/tools/marcmodtemplates/templatechoice.png"/>
24343 <section id="stagemarc">
24344 <title><link linkend="stagemarc">Stage MARC Records for Import</link></title>
24348 <para><emphasis>Get there:</emphasis> More > Tools > Catalog
24349 > Stage MARC records for import</para>
24353 <para>This tool can be used to import both bibliographic and authority
24354 records that are saved in MARC format. Importing records into Koha
24355 includes two steps. The first is to stage records for import.</para>
24359 <para>First find the MARC file on your computer</para>
24362 <screeninfo>Stage MARC Records for Import</screeninfo>
24366 <imagedata fileref="images/tools/marcimport/stagemarc-pt1.png"/>
24373 <para>Next you will be presented with options for record matching
24374 and item imports</para>
24377 <screeninfo>Upload options</screeninfo>
24381 <imagedata fileref="images/tools/marcimport/stagemarc-pt2.png"/>
24388 <para>Enter 'Comments about this file' to identify your upload
24389 when going to the '<link linkend="managestaged">Manage Staged
24390 MARC Records</link>' tool</para>
24394 <para>Tell Koha which type of file this is, bibliographic or
24398 <screeninfo>Record type</screeninfo>
24402 <imagedata fileref="images/tools/marcimport/recordtype.png"/>
24409 <para>Choose the character encoding</para>
24412 <screeninfo>Chracter encoding</screeninfo>
24416 <imagedata fileref="images/tools/marcimport/encoding.png"/>
24423 <para>Choose if you would like to use a <link linkend="marcmodtemplates">MARC
24424 Modification Template</link> to alter the data you're about to import</para>
24426 <screeninfo>Choose modification template</screeninfo>
24429 <imagedata fileref="images/tools/marcimport/templatechoice.png"/>
24435 <para>Choose whether or not you want to look for matching records</para>
24437 <screeninfo>Look for matches</screeninfo>
24440 <imagedata fileref="images/tools/marcimport/matches.png"/>
24446 <para>You can set up <link linkend="recordmatchingrules">record matching
24447 rules</link> through the administration area</para>
24449 <screeninfo>Matching rules</screeninfo>
24452 <imagedata fileref="images/tools/marcimport/matchrule.png"/>
24458 <para>When using the ISBN matching rule Koha will find only exact matches.
24459 If you find that the ISBN match is not working to your satisfaction you
24460 can change the <link linkend="AggressiveMatchOnISBN">AggressiveMatchOnISBN</link> preference to 'Do' and then run your
24461 import again.</para>
24469 <para>Next choose what to do with matching records if they are
24474 <para>Finally choose what to do with records that are
24479 <para>Next you can choose whether or not to import the item
24480 data found in the MARC records (if the file you're loading is
24481 a bibliographic file)</para>
24484 <screeninfo>Import items</screeninfo>
24488 <imagedata fileref="images/tools/marcimport/checkitems.png"/>
24494 <listitem><para>From here you can choose to always add items regardless of matching status, add them only if a
24495 matching bib was found, add items only if there was no matching bib record,
24496 replace items if a matching bib was found (The match will look at the
24497 itemnumbers and barcodes to match on for items. Itemnumbers take precendence
24498 over barcodes), or Ignore items and not add them.</para></listitem>
24504 <para>Click 'Stage for import'</para>
24508 <para>You will be presented with a confirmation of your MARC
24512 <screeninfo>MARC Import Confirmation</screeninfo>
24516 <imagedata fileref="images/tools/marcimport/stagemarc-results.png"/>
24523 <para>To complete the process continue to the <link linkend="managestaged">Manage Staged
24524 MARC Records Tool</link></para>
24529 <section id="managestaged">
24530 <title><link linkend="managestaged">Staged MARC Record Management</link></title>
24534 <para><emphasis>Get there:</emphasis> More > Tools > Catalog
24535 > Staged MARC Record Management</para>
24539 <para>Once you have <link linkend="stagemarc">staged</link> your
24540 records for import you can complete the import using this tool.</para>
24543 <screeninfo>List of Staged MARC Records</screeninfo>
24547 <imagedata fileref="images/tools/marcimport/managestaged.png"/>
24554 <para>From the list of staged records, click on the file name that
24555 you want to finish importing</para>
24559 <para>You will note that records that have already been
24560 imported will say so under 'Status'</para>
24566 <para>A summary of your import will appear along with the option
24567 to change your matching rules</para>
24570 <screeninfo>Manage Staged Records Batch</screeninfo>
24574 <imagedata fileref="images/tools/marcimport/managestagedrecords.png"/>
24581 <para>Below the summary is the option to import the batch of bib
24582 records using a specific framework</para>
24585 <screeninfo>Choose Framework to Import Into</screeninfo>
24589 <imagedata fileref="images/tools/marcimport/importframework.png"/>
24596 <para>Choosing a framework other than 'Default' isn't
24597 necessary, but it's helpful for running reports and having the
24598 right bib level item type selected on import.</para>
24604 <para>Below the framework selection there will be a list of the
24605 records that will be imported</para>
24608 <screeninfo>List of Staged Records</screeninfo>
24612 <imagedata fileref="images/tools/marcimport/stagedrecords.png"/>
24619 <para>Review your summary before completing your import to make sure that your
24620 matching rule worked and that the records appear as you expect them to</para>
24623 <para>Matches will appear with info under the 'Match details column'</para>
24625 <screeninfo>Matched record</screeninfo>
24628 <imagedata fileref="images/tools/marcimport/matchfound.png"/>
24632 <para>and when clicking the 'View' link under 'Diff' you can see the difference
24633 between versions.</para>
24635 <screeninfo>Record differences</screeninfo>
24638 <imagedata fileref="images/tools/marcimport/stagediff.png"/>
24647 <para>Click 'Import into catalog' to complete the import</para>
24650 <screeninfo>Import summary</screeninfo>
24654 <imagedata fileref="images/tools/marcimport/importedrecords.png"/>
24661 <para>Once your import is complete a link to the new bib records
24662 will appear to the right of each title that was imported</para>
24666 <para>You can also undo your import by clicking the 'Undo import
24667 into catalog' button</para>
24671 <para>Records imported using this tool remain in the 'reservoir' until
24672 they are cleaned. These items will appear when searching the catalog
24673 from the <link linkend="cataloging">Cataloging</link> tool:</para>
24676 <screeninfo>Reservoir Results</screeninfo>
24680 <imagedata fileref="images/tools/marcimport/reservoirresults.png"/>
24685 <para>To clean items out of the 'reservoir':</para>
24689 <para>Visit the main screen of the Manage Staged MARC Records
24693 <screeninfo>List of Staged MARC Records</screeninfo>
24697 <imagedata fileref="images/tools/marcimport/managestaged.png"/>
24704 <para>To clean a batch, click the 'Clean' button to the
24709 <para>You will be presented with a confirmation message</para>
24712 <screeninfo>Clean MARC Records Confirmation</screeninfo>
24716 <imagedata fileref="images/tools/marcimport/cleanbatch.png"/>
24723 <para>Accept the deletion and the records will be removed from
24724 the reservoir and the status will be changed to
24732 <section id="uploadlocalimages">
24733 <title><link linkend="uploadlocalimages">Upload Local Cover Image</link></title>
24737 <para><emphasis>Get there:</emphasis> More > Tools > Catalog
24738 > Upload Local Cover Image</para>
24742 <para>This tool will allow you to upload cover images for the materials in your catalog. To
24743 access this tool, staff will need the <link linkend="toolspermissions">upload_local_cover_images permission</link>. In order for images to show in the staff
24744 client and/or OPAC you will need to set your <link linkend="LocalCoverImages">LocalCoverImages</link> and/or <link linkend="OPACLocalCoverImages">OPACLocalCoverImages</link> preferences to 'Display.' Images can be uploaded in batches
24745 or one by one.<note>
24746 <para>Koha does not have a maximum file size limit for this tool, but Apache may limit
24747 the maximum size of uploads (talk to your sys admin).</para>
24749 <para>When you want to upload multiple images onto a bib record, they will display left
24750 to right (then top to bottom, depending on screen real estate) in order of uploading,
24751 and the one on the left (the first one uploaded) will be the one used as a thumbnail
24752 cover in search results and on the detail page. There is no way to reorder cover
24753 images uploaded in this way, so be sure to upload them in the order you'd like them to appear.<screenshot>
24754 <screeninfo>Multiple cover images on one record</screeninfo>
24757 <imagedata fileref="images/tools/uploadlocalimg/multiplecovers.png"/>
24760 </screenshot></para>
24763 <para>If uploading a single image:</para>
24767 <para>Visit the tool and click the 'Browse' button to browse to
24768 the image on your local machine.</para>
24771 <screeninfo>Upload single cover image</screeninfo>
24775 <imagedata fileref="images/tools/uploadlocalimg/uploadsingle.png"/>
24782 <para>Click 'Upload file'</para>
24786 <para>Choose 'Image file' under the 'File type' section</para>
24790 <para>Enter the biblionumber for the record you're attaching this
24791 image to. This is not the same as the barcode, this is the system
24792 generated number assigned by Koha.</para>
24796 <para>Find the biblionumber by looking at the end of the URL
24797 in the address bar when on the detail page</para>
24800 <screeninfo>Biblionumber in URL</screeninfo>
24804 <imagedata fileref="images/tools/uploadlocalimg/bibnumurl.png"/>
24811 <para>or by clicking on the MARC tab on the detail page in the
24812 staff client</para>
24815 <screeninfo>Biblionumber on MARC Record</screeninfo>
24819 <imagedata fileref="images/tools/uploadlocalimg/bibnummarc.png"/>
24828 <para>If you would like to replace any other cover images you may
24829 have uploaded in the past, check the 'Replace existing covers' box
24830 under the 'Options' section</para>
24834 <para>Click 'Process images'</para>
24838 <para>You will be presented with a summary of the upload and a
24839 link to the record you have just added the image to</para>
24843 <para>If uploading a batch of images at once you will need to prepare
24844 a ZIP file first.</para>
24848 <para>Enter in to the ZIP file all the images you are
24853 <para>Also include a text file (*.TXT) named either datalink.txt
24854 or idlink.txt listing the biblionumber followed by the image name
24855 for each image one per line</para>
24859 <para>ex. 4091,image4091.jpg</para>
24862 <screeninfo>ZIP File Contents</screeninfo>
24866 <imagedata fileref="images/tools/uploadlocalimg/zipfiles.png"/>
24875 <para>Browse your local computer to the ZIP file</para>
24879 <para>Click 'Upload file'</para>
24883 <para>Choose 'Zip file' under the 'File type' section</para>
24887 <para>If you would like to replace any other cover images you may
24888 have uploaded in the past, check the 'Replace existing covers' box
24889 under the 'Options' section</para>
24893 <para>Click 'Process images'</para>
24897 <para>You will be presented with a summary of the upload</para>
24900 <screeninfo>Upload Summary</screeninfo>
24904 <imagedata fileref="images/tools/uploadlocalimg/uploadsummary.png"/>
24912 <para>The source image is used to generate a 140 x 200 px thumbnail image and a 600 x 800
24913 px full-size image. The original sized image uploaded will not be stored by Koha</para>
24916 <para>You will be able to see your cover images in the staff client on
24917 the detail page under the 'Image' tab in the holdings table at the
24921 <screeninfo>Cover images in the staff client</screeninfo>
24925 <imagedata fileref="images/admin/globalprefs/AllowMultipleCovers.png"/>
24930 <para>In the OPAC the cover images will also appear in the images tab,
24931 as well as next to the title and on the search results.</para>
24932 <para>If you would like to remove a cover image you can click 'Delete image' below the image
24933 if you have the <link linkend="toolspermissions">upload_local_cover_images
24934 permission</link>.</para>
24938 <section id="additionaltools">
24939 <title><link linkend="additionaltools">Additional Tools</link></title>
24943 <section id="calholidays">
24944 <title><link linkend="calholidays">Calendar</link></title>
24948 <para><emphasis>Get there:</emphasis> More > Tools >
24949 Additional Tools > Calendar</para>
24953 <para>Libraries can define library closings and holidays to be used
24954 when calculating due dates. You can make use of the Calendar by
24955 turning on the proper system preferences:</para>
24959 <para><emphasis>Get there: </emphasis>More > Administration
24960 > Global System Preferences > Circulation > <link linkend="useDaysMode">useDaysMode</link></para>
24964 <para>Choose the method for calculating due date - either
24965 include days the library is closed in the calculation or don't
24966 include them.</para>
24972 <para><emphasis>Get there:</emphasis> More > Administration
24973 > Global System Preferences > Circulation > <link linkend="finesCalendar">finescalendar</link></para>
24977 <para>This will check the holiday calendar before charging
24985 <screeninfo>Calendar & Holidays Tools</screeninfo>
24989 <imagedata fileref="images/tools/calendar/calendar.png"/>
24994 <section id="addevents">
24995 <title><link linkend="addevents">Adding Events</link></title>
24997 <para>Before adding events, choose the library you would like to
24998 apply the closings to. When adding events you will be asked if you
24999 would like to apply the event to one branch or all branches. To add
25000 events, simply</para>
25004 <para>Click on the date on the calendar that you would like to
25005 apply the closing to</para>
25008 <screeninfo>Calendar Add Form</screeninfo>
25012 <imagedata fileref="images/tools/calendar/calendaradd.png"/>
25019 <para>In the form that appears above the calendar, enter the
25020 closing information (for more info on each option click the
25021 question mark [?] to the right of the option)</para>
25025 <para>Library will be filled in automatically based on the
25026 library you chose from the pull down at the top of the
25031 <para>The day information will also be filled in
25032 automatically based on the date you clicked on the
25037 <para>In the description enter the reason the library is
25042 <para>Next you can choose if this event is a one time event
25043 or if it is repeatable.</para>
25047 <para>If this is a one day holiday choose 'Holiday only
25048 on this day'</para>
25052 <para>If this is a weekly closing (like a weekend day)
25053 then you can choose 'Holiday repeated every same day of
25058 <para>If this is an annual holiday closing choose
25059 'Holiday repeated yearly on the same date'</para>
25063 <para>If the library is going to be closed for the week
25064 or a range of time choose 'Holiday on a range' and enter
25065 a 'To Date' at the top</para>
25069 <para>If the library is going to be closed for a range
25070 of time each year (such as summer holidays for schools)
25071 choose 'Holiday repeated yearly on a range' and enter a
25072 'To Date' at the top</para>
25078 <para>Finally decide if this event should be applied to all
25079 libraries or just the one you have originally
25084 <para>If you'd rather enter all the holidays and then
25085 copy them all to another branch all at once you can use
25086 the copy menu below the calendar</para>
25089 <screeninfo>Copy holidays</screeninfo>
25093 <imagedata fileref="images/tools/calendar/copyholidays.png"/>
25104 <para>After saving you will see the event listed in the summary
25105 to the right the calendar</para>
25108 <screeninfo>Calendar Summary</screeninfo>
25112 <imagedata fileref="images/tools/calendar/calendarsummary.png"/>
25120 <section id="editevents">
25121 <title><link linkend="editevents">Editing Events</link></title>
25123 <para>To edit events</para>
25127 <para>Click on the event on the calendar that you want to change
25128 (do this by clicking on the date on the calendar, not the event
25129 listed in the summary)</para>
25132 <screeninfo>Edit holiday form</screeninfo>
25136 <imagedata fileref="images/tools/calendar/calendaredit.png"/>
25143 <para>From this form you can make edits to the holiday or delete the holiday
25144 completely. <itemizedlist>
25146 <para>All actions require that you click 'Save' before the change will be
25149 </itemizedlist></para>
25153 <para>Clicking on repeatable events will offer slightly
25154 different options</para>
25157 <screeninfo>Edit repeatable event</screeninfo>
25161 <imagedata fileref="images/tools/calendar/calendarexception.png"/>
25168 <para>In the form above you will note that there is now an option to 'Generate an
25169 exception for this repeated holiday,' choosing this option will allow you to
25170 make it so that this date is not closed even though the library is usually
25171 closed on this date.<itemizedlist>
25173 <para>All actions require that you click 'Save' before the change will be
25176 </itemizedlist></para>
25183 <section id="calendarhelp">
25184 <title><link linkend="calendarhelp">Additional Help</link></title>
25186 <para>When adding or editing events you can get additional help by
25187 clicking on the question mark next to various different options on
25191 <screeninfo>Additional Calendar Help Buttons</screeninfo>
25195 <imagedata fileref="images/tools/calendar/calendarhelp.png"/>
25202 <section id="csvprofiles">
25203 <title><link linkend="csvprofiles">CSV Profiles</link></title>
25207 <para><emphasis>Get there:</emphasis> More > Tools >
25208 Additional Tools > CSV Profiles</para>
25212 <para>CSV Profiles are created to define how you would like your cart
25213 or list to export.</para>
25215 <section id="addcsvprofile">
25216 <title><link linkend="addcsvprofile">Add CSV Profiles</link></title>
25218 <para>To add a CSV Profile</para>
25222 <para>Click 'CSV Profiles' from the Tools menu</para>
25225 <para>The 'Profile type' determines what type of fields you plan to use (MARC or SQL)
25226 to define your profile<itemizedlist>
25228 <para>If you choose MARC then you will need to enter MARC fields</para>
25230 </itemizedlist></para>
25232 <screeninfo>MARC CSV Profile</screeninfo>
25235 <imagedata fileref="images/tools/csvprofiles/addcsv.png"/>
25241 <para>If you choose SQL then you will need to enter SQL database fields</para>
25243 <screeninfo>SQL CSV Profile</screeninfo>
25246 <imagedata fileref="images/tools/csvprofiles/addcsv-sql.png"/>
25254 <para>The 'Profile name' will appear on the export pull down list when choosing
25255 'Download' from your cart or list</para>
25257 <screeninfo>Download List</screeninfo>
25260 <imagedata fileref="images/tools/csvprofiles/downloadcsv.png"/>
25266 <para>The 'Profile description' is for your own benefit, but will also appear in
25267 the OPAC when patrons download content, so make sure it's clear to your patrons
25271 <para>The 'CSV separator' is the character used to separate values and value groups<note>
25272 <para>The most common option here is comma because most spreadsheet
25273 applications know how to open files split by commas.</para>
25277 <para>The 'Field separator' is the character used to separate duplicate
25281 <para>Example: You may have multiple 650 fields and this is the character that
25282 will appear in between each one in the column</para>
25284 <screeninfo>Field separators in between multiple subjects</screeninfo>
25287 <imagedata fileref="images/tools/csvprofiles/csvfieldsep.png"/>
25295 <para>The 'Subfield separator' is the character used to separate duplicate
25299 <para>Example: You may have multiple $a subfields in a field</para>
25304 <para>The 'Encoding' field lets you define the encoding used when saving the
25308 <para>Finally format your CSV file using the 'Profile MARC' or 'Profile SQL'
25312 <para>Define which fields or subfields you want to export, separated by pipes.
25313 Example : 200|210$a|301 for MARC and biblio.title|biblio.author for
25318 <para>You can also use your own headers (instead of the ones from Koha) by
25319 prefixing the field number with an header, followed by the equal sign.
25320 Example : Personal name=100|title=245$a|300</para>
25326 <para>When you have entered in all of the information for you profile, simply click
25327 'Submit' and you will be presented with a confirmation that your profile has been saved.</para>
25329 <screeninfo>Confirmation of new CSV profile</screeninfo>
25332 <imagedata fileref="images/tools/csvprofiles/csvadded.png"/>
25340 <section id="editcsvprofile">
25341 <title><link linkend="editcsvprofile">Modify CSV Profiles</link></title>
25343 <para>Once you have created at least one CSV Profile an 'Edit
25344 profile' tab will appear next to the 'New profile' button.</para>
25347 <screeninfo>Modify CSV Profiles</screeninfo>
25351 <imagedata fileref="images/tools/csvprofiles/modifycsv.png"/>
25358 <para>Choose the profile you would like to edit and alter the necessary fields.</para>
25361 <para>After submitting your changes you will be presented with a confirmation message
25362 at the top of the screen</para>
25364 <screeninfo>Confirmation of CSV modification</screeninfo>
25367 <imagedata fileref="images/tools/csvprofiles/csvmodified.png"/>
25374 <para>To delete a profile, check the 'Delete selected profile'
25375 option before clicking 'Submit Query'</para>
25378 <screeninfo>Delete an existing CSV Profile</screeninfo>
25382 <imagedata fileref="images/tools/csvprofiles/deletecsv.png"/>
25390 <section id="usecsvprofiles">
25391 <title><link linkend="usecsvprofiles">Using CSV Profiles</link></title>
25393 <para>Your CSV Profiles will appear on the export list or cart menu under the 'Download'
25394 button in both the staff client and the OPAC</para>
25397 <screeninfo>CSV Profiles on Download Menu in the Staff Client</screeninfo>
25401 <imagedata fileref="images/tools/csvprofiles/exportlist.png"/>
25408 <section id="logviewer">
25409 <title><link linkend="logviewer">Log Viewer</link></title>
25413 <para><emphasis>Get there:</emphasis> More > Tools >
25414 Additional Tools > Log Viewer</para>
25418 <para>Actions within the Koha system are tracked in log files. Your
25419 <link linkend="logs">system preferences</link> can be changed to
25420 prevent the logging of different actions. These logs can be viewed
25421 using the Log Viewer Tool.</para>
25424 <screeninfo>Log Viewer</screeninfo>
25428 <imagedata fileref="images/tools/logs/logviewer.png"/>
25433 <para>Choosing different combinations of menu options will produce the
25434 log file for that query.</para>
25437 <screeninfo>A query for all logs related to the Circulation module
25438 produces a result like this</screeninfo>
25442 <imagedata fileref="images/tools/logs/logresults.png"/>
25448 <section id="newstool">
25449 <title><link linkend="newstool">News</link></title>
25453 <para><emphasis>Get there:</emphasis> More > Tools >
25454 Additional Tools > News</para>
25458 <para>Koha's news module allows librarians to post news to the OPAC,
25459 staff interface and circulation receipts.</para>
25462 <screeninfo>Koha News Module</screeninfo>
25466 <imagedata fileref="images/tools/news/news.png"/>
25471 <para>To add news to either the OPAC, the Staff Client or a
25472 Circulation receipt:</para>
25476 <para>Click 'New Entry'</para>
25479 <screeninfo>Add Koha News Form</screeninfo>
25483 <imagedata fileref="images/tools/news/addnews.png"/>
25490 <para>Under 'Display Location' choose whether to put the news on the OPAC, Slip
25491 (circulation receipt) or the Librarian (Staff) Interface.<screenshot>
25492 <screeninfo>Display location</screeninfo>
25495 <imagedata fileref="images/tools/news/displaylocation.png"/>
25498 </screenshot></para>
25502 <para>Choose the library this news item will show for</para>
25505 <para>Choose a title for your entry</para>
25509 <para>Using the publication and expiration date fields you can
25510 control from which date and for how long your news
25511 item appears</para>
25515 <para>Examples: (these assume today's date as 07-May-2015)<itemizedlist>
25517 <para>Publish on current date: set publication date as
25521 <para>Schedule for publishing in future: set date later than
25525 <para>Backdate the news item: set date earlier than 07-May-2015</para>
25527 </itemizedlist></para>
25534 <para>'Appear in position' lets you decide what order your
25535 news items appear in</para>
25539 <para>The 'News' box allows for the use of HTML for formatting
25540 of your news item</para>
25546 <para>After filling in all of the fields, click 'Submit'</para>
25550 <para>News in the OPAC will appear above the <link linkend="OpacMainUserBlock">OpacMainUserBlock</link></para>
25553 <screeninfo>News in the OPAC</screeninfo>
25557 <imagedata fileref="images/tools/news/opacnews.png"/>
25563 <para>Below the news in the OPAC there will be an RSS icon allowing you to subscribe
25564 to library news<screenshot>
25565 <screeninfo>News RSS feed</screeninfo>
25568 <imagedata fileref="images/tools/news/newsrss.png"/>
25571 </screenshot></para>
25577 <para>News in the Staff Client will appear on the far left of the
25581 <screeninfo>News in the Staff Client</screeninfo>
25585 <imagedata fileref="images/tools/news/librariannews.png"/>
25592 <para>News on the circulation receipts will appear below the items
25593 that are checked out</para>
25596 <screeninfo>News at the bottom of the circulation
25597 receipt</screeninfo>
25601 <imagedata fileref="images/tools/news/slipnews.png"/>
25607 <para>Depending on your choice for the <link linkend="NewsAuthorDisplay">NewsAuthorDisplay</link> preference you will also see the person who created the
25608 news item (this uses the logged in person)</para>
25613 <section id="taskscheduler">
25614 <title><link linkend="taskscheduler">Task Scheduler</link></title>
25618 <para><emphasis>Get there:</emphasis> More > Tools >
25619 Additional Tools > Task Scheduler</para>
25623 <para>The task scheduler is a way to schedule reports to run whenever
25626 <para>To schedule a task, visit the Task Scheduler and fill in the
25630 <screeninfo>Task Scheduler</screeninfo>
25634 <imagedata fileref="images/tools/tasksched/taskscheduler.png"/>
25641 <para>Current Server Time shows the time on your server (schedule
25642 all of your reports to run based on that time - not on your local
25647 <para>Time should be entered as hh:mm (2 digit hour, 2 digit
25652 <para>Date should be entered using the calendar pop up</para>
25656 <para>From Report choose the report you want to schedule</para>
25660 <para>Choose whether to receive the text of or a link to the
25665 <para>In the Email filed enter the email of the person you want to
25666 receive your report</para>
25670 <para>Below the task scheduler form, there is a list of scheduled
25674 <screeninfo>Scheduled Tasks</screeninfo>
25678 <imagedata fileref="images/tools/tasksched/scheduledreports.png"/>
25683 <para>You can also schedule reports directly from the list of saved
25684 reports by clicking the 'Schedule' link</para>
25687 <screeninfo>Saved Reports List</screeninfo>
25691 <imagedata fileref="images/tools/tasksched/savedreports.png"/>
25696 <section id="taskscedtroubleshoot">
25697 <title><link linkend="taskscedtroubleshoot">Troubleshooting</link></title>
25699 <para>Task scheduler will not work if the user the web server runs
25700 as doesn't have the permission to use it. To find out if the right
25701 user has the permissions necessary, check /etc/at.allow to see what
25702 users are in it. If you don't have that file, check etc/at.deny. If
25703 at.deny exists but is blank, then every user can use it. Talk to
25704 your system admin about adding the user to the right place to make
25705 the task scheduler work.</para>
25709 <section id="QOTDEditor">
25710 <title><link linkend="QOTDEditor">Quote of the Day (QOTD) Editor</link></title>
25713 <para><emphasis>Get there:</emphasis> More > Tools > Additional Tools > Edit
25714 quotes for QOTD feature</para>
25718 <para>This tool will allow you to add and edit quotes to show on the
25719 OPAC if you're using the Quote of the Day (QOTD) feature.</para>
25721 <para>To turn this feature on set the <link linkend="QuoteOfTheDay">QuoteOfTheDay</link> preference to 'Enable and
25722 add at least one quote via the Quote of the Day Editor. Once these
25723 steps are complete you will see your quotes above the <link linkend="OpacMainUserBlock">OpacMainUserBlock</link> in the
25727 <screeninfo>Quote in the OPAC</screeninfo>
25731 <imagedata fileref="images/tools/qotd/quoteinopac.png"/>
25736 <section id="addquote">
25737 <title><link linkend="addquote">Add a Quote</link></title>
25739 <para>To add a quote:</para>
25743 <para>Click the 'Add quote' button in the toolbar and an empty
25744 quote entry will be added to the end of the current quote
25748 <screeninfo>Add quote button</screeninfo>
25752 <imagedata fileref="images/tools/qotd/quotebuttons.png"/>
25760 <para>Both the 'Source' and the 'Text' fields must be
25761 filled in in order to save the new quote.</para>
25764 <screeninfo>Add quote</screeninfo>
25768 <imagedata fileref="images/tools/qotd/addquote.png"/>
25778 <para>When finished filling in both fields, press the
25779 <Enter> key on your keyboard to save the new quote.</para>
25783 <para>The list will update and the new quote should now be
25784 visible in the list.</para>
25789 <para>You may cancel the addition of a new quote any time prior to
25790 saving it simply by pressing the <Esc> key on your
25795 <section id="editquote">
25796 <title><link linkend="editquote">Edit/Delete a Quote</link></title>
25798 <para>Once the current quote pool has been loaded into the editing
25799 table, you may edit the quote source and text.</para>
25803 <para>Edit either the 'Source' or 'Text' fields by clicking on
25804 the desired field.</para>
25807 <screeninfo>Edit quote</screeninfo>
25811 <imagedata fileref="images/tools/qotd/editquote.png"/>
25818 <para>When you are finished editing a field, press the
25819 <Enter> key on your keyboard to save the changes.</para>
25823 <para>The list will be updated, the edits saved, and visible.</para>
25825 <para>If you'd like you can also delete quote(s).</para>
25829 <para>Select the quote(s) you desire to delete by clicking on
25830 the corresponding quote id.</para>
25834 <para>Once quote selection is finished, simply click the 'Delete
25835 quote(s)' button.</para>
25839 <para>You will be prompted to confirm the deletion.</para>
25843 <para>After confirming the deletion, the list will update and
25844 the quote(s) will no longer appear.</para>
25849 <section id="importquote">
25850 <title><link linkend="importquote">Import Quotes</link></title>
25852 <para>If you'd like you can import a batch of quotes as a CSV file.
25853 Your file must contain two columns in the form: "source","text" with
25854 no header row.</para>
25857 <para>You will be prompted to confirm upload of files larger than
25863 <para>To start the import process click the 'Import quotes'
25864 button at the top of the screen</para>
25867 <screeninfo>Import quotes button</screeninfo>
25871 <imagedata fileref="images/tools/qotd/quotebuttons.png"/>
25878 <para>Once on the import quotes screen you can browse your
25879 computer for the file you would like to import</para>
25882 <screeninfo>Import quotes</screeninfo>
25886 <imagedata fileref="images/tools/qotd/importquotes.png"/>
25893 <para>After selecting the CSV file, click the 'Open' button and
25894 the file will be uploaded into a temporary editing table.</para>
25897 <screeninfo>Imported quotes</screeninfo>
25901 <imagedata fileref="images/tools/qotd/importedsummary.png"/>
25908 <para>From the listing you can edit either the 'Source' or
25909 'Text' fields by clicking on the desired field. When you are
25910 finished editing a field, press the <Enter> key on your
25911 keyboard to save the changes.</para>
25914 <screeninfo>Edit imported quote</screeninfo>
25918 <imagedata fileref="images/tools/qotd/editimported.png"/>
25925 <para>You can also delete quotes from this listing before
25926 completing the import.</para>
25930 <para>Select the quote(s) you desire to delete by clicking
25931 on the corresponding quote id.</para>
25934 <screeninfo>Selected for deletion</screeninfo>
25938 <imagedata fileref="images/tools/qotd/selectfordelete.png"/>
25945 <para>Once quote selection is finished, simply click the
25946 'Delete quote(s)' key.</para>
25949 <screeninfo>Delete quote(s)</screeninfo>
25953 <imagedata fileref="images/tools/qotd/importquotebuttons.png"/>
25960 <para>You will be prompted to confirm the deletion.</para>
25963 <screeninfo>Confirm deletion</screeninfo>
25967 <imagedata fileref="images/tools/qotd/confirmdelete.png"/>
25974 <para>After confirming the deletion, the list will update
25975 and the quote(s) will no longer appear.</para>
25981 <para>Once you are satisfied with the quotes, click the 'Save
25982 quotes' button in the toolbar at the top and the quotes will be
25986 <screeninfo>Save quotes button</screeninfo>
25990 <imagedata fileref="images/tools/qotd/importquotebuttons.png"/>
25998 <section id="uploadtool">
25999 <title><link linkend="uploadtool">Upload</link></title>
26003 <para><emphasis>Get there:</emphasis> More > Tools > Additional Tools >
26008 <para>This tool will allow you to upload files to your Koha system for selection from the
26009 <link linkend="uploadbibfile">Cataloging form</link>. </para>
26010 <section id="uploadfiles">
26011 <title><link linkend="uploadfiles">Upload Files</link></title>
26012 <para>When you first visit the Upload tool you might see a warning about missing a category.<screenshot>
26013 <screeninfo>Upload to temprorary</screeninfo>
26016 <imagedata fileref="images/tools/upload/uploadtemp.png"/>
26019 </screenshot></para>
26020 <para>Categories are defined in the <link linkend="authorizedvalues">authorized
26021 value</link> in the UPLOAD category. If you do not have upload categories then your
26022 files will be temporary and will be deleted the next time the server is rebooted. Once
26023 you have a value in the UPLOAD authorized value category you will see a Category pull
26024 down below the 'Browse' button.<screenshot>
26025 <screeninfo>Upload to category</screeninfo>
26028 <imagedata fileref="images/tools/upload/upload.png"/>
26031 </screenshot></para>
26032 <para>Browse your computer a file, choose a category and decide if the public will be able
26033 to download this file via the OPAC. Once your file is uploaded you will be presented
26034 with a confirmation.<screenshot>
26035 <screeninfo>Upload confirmation</screeninfo>
26038 <imagedata fileref="images/tools/upload/uploadresult.png"/>
26041 </screenshot></para>
26043 <section id="searchuploads">
26044 <title><link linkend="searchuploads">Search Files</link></title>
26045 <para>All uploaded files are searchable from below the upload form. Using the form you
26046 can search any part of the filename and/or the Hashvalue.<screenshot>
26047 <screeninfo>Search uploaded files</screeninfo>
26050 <imagedata fileref="images/tools/upload/uploadsearch.png"/>
26053 </screenshot></para>
26054 <para>You will be presened with the results of your search.<screenshot>
26055 <screeninfo>Search results</screeninfo>
26058 <imagedata fileref="images/tools/upload/uploadsearchresult.png"/>
26061 </screenshot></para>
26067 <chapter id="patrons">
26068 <title>Patrons</title>
26070 <para>Before importing and/or adding patrons be sure to set up your <link linkend="patcats">patron categories</link>.</para>
26072 <section id="addnewpatron">
26073 <title><link linkend="addnewpatron">Add a new patron</link></title>
26075 <para>Patrons are added by going to the 'Patrons' module.<itemizedlist>
26077 <para><emphasis>Get there:</emphasis> Patrons</para>
26079 </itemizedlist></para>
26080 <para>Once there you can add a new patron.</para>
26084 <para>Click 'New patron'</para>
26087 <screeninfo>Choose patron type</screeninfo>
26091 <imagedata fileref="images/patrons/newpatron.png"/>
26098 <para>The fields that appear on the patron add form can be
26099 controlled by editing the <link linkend="BorrowerUnwantedField">BorrowerUnwantedField</link> system
26104 <para>First enter the identifying information regarding your
26108 <screeninfo>Add Patron Form</screeninfo>
26112 <imagedata fileref="images/patrons/addpatronform.png"/>
26119 <para>Required fields are defined in the <link linkend="BorrowerMandatoryField">BorrowerMandatoryField</link>
26120 system preference</para>
26124 <para>Salutation is populated by the <link linkend="BorrowersTitles">BorrowersTitles</link> system
26129 <para>If you'd like to prevent full names from printing on <link linkend="notices">slips</link> and you're not using the Initials or Other name fields for
26130 anything else, you can use them for shortened versions of the name to then be
26131 printed on the slip. </para>
26133 <programlisting>Firstname: Nicole C.
26135 Initials: NCE</programlisting></para>
26136 <para>Then on the slip you can have it print the <<borrowers.initials>>
26137 instead of the full name (NCE).</para>
26138 <para>Or you could do something like
26139 this:<programlisting>Firstname: Nicole
26141 Initials: E</programlisting></para>
26142 <para>Then on the slip you can have it print the <<borrowers.initials>>,
26143 <<borrowers.firstname>> instead of the full name (E, Nicole).</para>
26150 <para>Next enter the contact information</para>
26153 <screeninfo>Patron Contact Information</screeninfo>
26157 <imagedata fileref="images/patrons/addcontact.png"/>
26164 <para>For contact information, note that the primary phone and
26165 email addresses are the ones that appear on notices and slips
26166 printed during circulation (receipts, transfer slips and hold
26167 slips). The primary email is also the one that overdue notices
26168 and other messages go to.</para>
26174 <para>If this patron is a child, you will be asked to attach the
26175 child patron to an adult patron</para>
26178 <screeninfo>Guarantor Linking</screeninfo>
26182 <imagedata fileref="images/patrons/addGuarantor.png"/>
26189 <para>Click 'Set to Patron' to search your system for an
26190 existing patron</para>
26194 <para>If the Guarantor is not in the system, you can enter the
26195 first and last name in the fields available</para>
26199 <para>The relationships are set using the <link linkend="borrowerRelationship">borrowerRelationship</link>
26200 system preference</para>
26206 <para>If this patron is a professional, you will be asked to attach
26207 the patron to an organizational patron</para>
26210 <screeninfo>Organization Linking</screeninfo>
26214 <imagedata fileref="images/patrons/addOrg.png"/>
26221 <para>Click 'Set to Patron to search your system for an existing
26228 <para>Each patron can have an alternate contact</para>
26231 <screeninfo>Alternate Contact</screeninfo>
26235 <imagedata fileref="images/patrons/addaltcontact.png"/>
26242 <para>An alternate contact could be a parent or guardian. It can
26243 also be used in academic settings to store the patron's home
26250 <para>The library management section includes values that are used
26251 within the library</para>
26254 <screeninfo>Library Management</screeninfo>
26258 <imagedata fileref="images/patrons/addlibmanagement.png"/>
26265 <para>The card number field is automatically calculated if you
26266 have the <link linkend="autoMemberNum">autoMemberNum</link>
26267 system preference set that way</para>
26272 <para>For a newly installed system this preference will
26273 start at 1 and increment by 1 each time after. To have it
26274 start with the starting number of your barcodes, enter the
26275 first barcode by hand in the patron record and save the
26276 patron. After that the field will increment that number by
26284 <para>If you accidentally chose the wrong patron category at the
26285 beginning you can fix that here</para>
26289 <para>Sort 1 and 2 are used for statistical purposes within your
26296 <para>Next, the Library Setup section includes additional library
26300 <screeninfo>Library set-up options</screeninfo>
26304 <imagedata fileref="images/patrons/addlibsetup.png"/>
26311 <para>The registration date will automatically be filled in with
26312 today's date</para>
26316 <para>If your patron cards expire (based on your <link linkend="patcats">patron category settings</link>) the Expiry
26317 date will automatically be calculated</para>
26321 <para>The OPAC Note is a note for the patron - it will appear in
26322 the OPAC on the patron's record</para>
26326 <para>The Circulation Note is meant solely for your library
26327 staff and will appear when the circulation staff goes to check
26328 an item out to the patron</para>
26331 <screeninfo>Sample Circulation Note</screeninfo>
26335 <imagedata fileref="images/patrons/circnote.png"/>
26342 <para>The Staff/OPAC asks for the username and password to be
26343 used by the patron (and/or staff member) to log into their
26344 account in the OPAC and for staff to log in to the staff
26349 <para>Staff will only be able to use this log in info to log
26350 in to the staff client if they have the <link linkend="patronpermissions">necessary
26351 permissions</link>.</para>
26359 <para>If you have set <link linkend="patronattributetypes">additional patron attributes</link>
26360 up, these will appear next</para>
26363 <screeninfo>Additional Patron Attributes</screeninfo>
26367 <imagedata fileref="images/patrons/addattributes.png"/>
26374 <para id="setpatronmessaging">Finally, if you have <link linkend="EnhancedMessagingPreferences">EnhancedMessagingPreferences</link>
26375 set to 'allow,' you can choose the messaging preferences for this
26379 <screeninfo>Patron Messaging Settings</screeninfo>
26383 <imagedata fileref="images/patrons/addpatronmsg.png"/>
26390 <para>These notices are:</para>
26393 <para>Advanced notice : A notice in advance of the patron's items being due (The
26394 patron can choose the number of days in advance)</para>
26397 <para>Item checkout : A notice that lists all the of the items the patron has just
26398 checked out and/or renewed, this is an electronic form of the checkout
26402 <para>Hold filled : A notice when you have confirmed the hold is waiting for the
26406 <para>Item due : A notice on the day and item is due back at the library</para>
26409 <para>Item check-in : A notice that lists all the of the items the patron has just
26415 <para>Patrons can choose to receive their notices as a digest by checking the 'Digest
26416 only?' box along with the delivery method. A digest is a combination of all the
26417 messages of that type (so all items due in 3 days in one email) in to one email
26418 instead of multiple emails for each alert.</para>
26422 <para>These preferences will override any you set via the
26423 <link linkend="addingpatroncat">patron
26424 categories</link></para>
26430 <para>These preference can be altered by the patron via the
26438 <para>Once finished, click 'Save'</para>
26442 <para>If the system suspects this patron is a duplicate of another it
26443 will warn you.</para>
26446 <screeninfo>Patron Duplicate Suspected</screeninfo>
26450 <imagedata fileref="images/patrons/duplicatewarn.png"/>
26455 <para>A duplicate patron is detected if first and last names match and there is no date of
26456 birth populated or if first name, last name and date of birth fields are all populated. If
26457 two patrons have matching names, but one has a date of birth and the other does not they
26458 will not match as duplicates.</para>
26461 <para>If you have set a minimum or upper age limit on the patron
26462 category and are requiring that the birth date be filled in, Koha will
26463 warn you if the patron you're adding is too old or young for the patron
26464 category you have selected:</para>
26467 <screeninfo>Patron age warning</screeninfo>
26471 <imagedata fileref="images/patrons/patronagelimit.png"/>
26477 <section id="addstaffpatron">
26478 <title><link linkend="addstaffpatron">Add a Staff Patron</link></title>
26480 <para>All staff members must be entered into Koha as patrons of the
26481 'Staff' type. Follow the steps in <link linkend="addnewpatron">Add a
26482 Patron</link> to add a staff member. To give the staff member
26483 permissions to access the staff client, follow the steps in <link linkend="patronpermissions">Patron Permissions</link></para>
26486 <para>Remember to assign your staff secure usernames and passwords
26487 since these will be used to log into the staff client.</para>
26491 <section id="addstatspatron">
26492 <title><link linkend="addstatspatron">Add a Statistical Patron</link></title>
26494 <para>One way to track use of in house items is to "check out" the materials to a statistical
26495 patron. The "check out" process doesn’t check the book out, but instead tracks an in house
26496 use of the item. To use this method for tracking in house use you first will need a <link linkend="patcats">patron category</link> set up for your Statistical patron.</para>
26499 <screeninfo>In House Patron Category</screeninfo>
26503 <imagedata fileref="images/patrons/statspatcat.png"/>
26508 <para>Next, you will need to create a new patron of the statistical
26512 <screeninfo>New In House Patron</screeninfo>
26516 <imagedata fileref="images/patrons/newinhouse.png"/>
26521 <para>Next, follow the steps put forth in the '<link linkend="addnewpatron">Add a new Patron</link>' section of this manual.
26522 Since this patron is not a real person, simply fill in the required
26523 fields, the correct library and nothing else.</para>
26525 <para>To learn about other methods of tracking in house use visit the
26526 <link linkend="trackinhouse">Tracking inhouse use</link> section of this
26530 <section id="duplicatepatron">
26531 <title><link linkend="duplicatepatron">Duplicate a Patron</link></title>
26533 <para>Sometimes when you're adding a new family to your system you don't
26534 want to type the contact information over and over. Koha allows for you
26535 to duplicate a patron and change only the parts you want to (or need to)
26540 <para>Open the patron you want to use as your base (the patron you
26541 want to duplicate information from)</para>
26545 <para>Click the 'Duplicate' button at the top of their record</para>
26548 <screeninfo>The Duplicate Button is the 3rd one in</screeninfo>
26552 <imagedata fileref="images/patrons/patronedit.png"/>
26559 <para>All of the fields with the exception of first name, card
26560 number, username and password have been duplicated. Fill in the
26561 missing pieces and click 'Save'</para>
26564 <screeninfo>Duplicating Patron Form</screeninfo>
26568 <imagedata fileref="images/patrons/duplicatedpatron.png"/>
26576 <para>Clicking in a field that is already populated with data
26577 will clear that field of all information (making it easier for
26578 you to type in something different)</para>
26585 <para>You will be brought to your new patron</para>
26588 <screeninfo>Newly created patron</screeninfo>
26592 <imagedata fileref="images/patrons/duplicatedpatronfinal.png"/>
26599 <section id="addpatronimages">
26600 <title><link linkend="addpatronimages">Add Patron Images</link></title>
26601 <para>If you would like you can add patron images to help identify patrons. To enable this
26602 feature you must first set the <link linkend="patronimages">patronimages</link> preference
26604 <para>If the preference is set to 'Allow' you will see a placeholder image under the patron's
26605 name and box to upload a patron image below the basic contact information.</para>
26607 <screeninfo>Add patron image</screeninfo>
26610 <imagedata fileref="images/patrons/addpatronimage.png"/>
26614 <para>In the 'Upload Patron Image' box click 'Browse' to find the image on your computer and
26615 'Upload' to load the image on to the patron record.</para>
26617 <screeninfo>Patron image</screeninfo>
26620 <imagedata fileref="images/patrons/patronimage.png"/>
26626 <para>There is a limit of 100K on the size of the picture uploaded and it is recommended
26627 that the image be 200x300 pixels, but smaller images will work as well.</para>
26632 <section id="editpatrons">
26633 <title><link linkend="editpatrons">Editing Patrons</link></title>
26635 <para>Patrons in Koha can be edited using one of many edit
26640 <para>To edit the entire patron record simply click the 'Edit'
26641 button at the top of the patron record.</para>
26644 <screeninfo>Main Patron Edit Menu</screeninfo>
26648 <imagedata fileref="images/patrons/patronedit.png"/>
26655 <para>Patron passwords are not recoverable. The stars show on the
26656 patron detail next to the Password label are always there even if a
26657 password isn't set. If a patron forgets their password the only
26658 option is to reset their password. To change the patron's password,
26659 click the 'Change Password' button</para>
26662 <screeninfo>Patron Password Change Form</screeninfo>
26666 <imagedata fileref="images/patrons/patronpassword.png"/>
26673 <para>Koha cannot display existing passwords. Leave the field
26674 blank to leave password unchanged.</para>
26678 <para>This form can automatically generate a random password if
26679 you click the link labeled "Click to fill with a randomly
26680 generated suggestion. Passwords will be displayed as
26687 <para>To edit a specific section of the patron record (for example
26688 the Library Use section) click the 'Edit' link below the
26692 <screeninfo>Library Use Section of Patron Record</screeninfo>
26696 <imagedata fileref="images/patrons/patroneditsection.png"/>
26703 <para>A patron image can be added by browsing for the image on your
26704 machine from the 'Manage Patron Image' section</para>
26707 <screeninfo>Manage Patron Image Form</screeninfo>
26711 <imagedata fileref="images/patrons/patronaddimage.png"/>
26718 <para>This form will not appear if you have the <link linkend="patronimages">patronimages</link> system preference to
26719 not allow patron images</para>
26723 <para>To add patron images in bulk, use the <link linkend="uploadpatronimages">Upload Patron Images</link>
26730 <para id="patronflags">Patrons can also be blocked from checking
26731 items out by setting Patron Flags</para>
26734 <screeninfo>Patron Warning Flags</screeninfo>
26738 <imagedata fileref="images/patrons/patronflags.png"/>
26745 <para>If you would like your circulation staff to confirm a
26746 patron's address before checking items out to the patron, you
26747 can see the 'Gone no Address' flag</para>
26750 <screeninfo>Patron's address in doubt</screeninfo>
26754 <imagedata fileref="images/patrons/patronaddress.png"/>
26760 <para>If the patron reports that they have lost their card you can set the 'Lost Card'
26761 flag to prevent someone else from using that card to check items out</para>
26763 <screeninfo>Patron lost card</screeninfo>
26766 <imagedata fileref="images/patrons/patroncardlost.png"/>
26773 <para>If you would like to bar a patron from the library you can add a manual
26776 <screeninfo>Add manual restriction</screeninfo>
26779 <imagedata fileref="images/patrons/addpatronrestriction.png"/>
26786 <note><para>This flag can automatically be set with the <link linkend="noticetriggers">Overdue/Notice Status
26787 Triggers</link></para></note>
26793 <para>If you enter in a date and/or note related to the
26794 restriction you will see that in the restricted message as
26798 <screeninfo>Restricted until message</screeninfo>
26802 <imagedata fileref="images/patrons/restricteduntil.png"/>
26811 <para>Children patrons do not become adults automatically in Koha unless you have <link linkend="j2acron">Juvenile to Adult cron job</link> running. To upgrade a child patron
26812 to and adult patron category manually go to the 'More' menu and choose 'Update Child to
26813 Adult Patron'</para>
26816 <screeninfo>Update Child to Adult Patron</screeninfo>
26820 <imagedata fileref="images/patrons/updatetoadult.png"/>
26827 <para>You will then be presented with a pop up window asking
26828 which one of your adult patron categories this Child should be
26832 <screeninfo>Choose Adult Category to Update To</screeninfo>
26836 <imagedata fileref="images/patrons/choosadulttype.png"/>
26845 <section id="mangepatronedits">
26846 <title><link linkend="mangepatronedits">Managing Patron Self Edits</link></title>
26847 <para>If you are allowing patrons to edit their accounts via the OPAC with the <link linkend="OPACPatronDetails">OPACPatronDetails</link> preference then you will need to
26848 approve all changes via the staff client before they're applied. If there are patron edits
26849 awaiting action they will appear on the staff client dashboard below the modules list (along
26850 with other items awaiting action).</para>
26852 <screeninfo>Patron requests waiting</screeninfo>
26855 <imagedata fileref="images/patrons/pendingpatronrequest.png"/>
26860 <para>Superlibrarians will see modifications for any branch, other staff will only see
26861 modifications for patrons who belong to their logged in branch.</para>
26862 </note>When you click the 'Patrons requesting modifications' link you will be brought to a
26863 list of patrons with requested changes.</para>
26865 <screeninfo>Manage patron updates</screeninfo>
26868 <imagedata fileref="images/patrons/managepatronupdates.png"/>
26872 <para>From here you can 'Approve' and apply the changes to the patron record, 'Delete' and
26873 remove the changes or 'Ignore' and keep the changes pending to review later.</para>
26874 <para>If you would like to see the entire patron record you can click the 'Patron details'
26875 links to the right of the buttons. This will open in a new tab.</para>
26878 <section id="patronpermissions">
26879 <title><link linkend="patronpermissions">Patron Permissions</link></title>
26881 <para>Patron Permissions are used to allow staff members access to the
26882 staff client.</para>
26885 <para>In order for a staff member to log into the staff interface they
26886 must have (at the very least) 'catalogue' permissions which allow them
26887 to view the staff interface.</para>
26890 <section id="setpatronperms">
26891 <title><link linkend="setpatronperms">Setting Patron Permissions</link></title>
26893 <para>To set patron permissions, you must first <link linkend="addstaffpatron">have a patron of the 'Staff' type</link>
26898 <para>On the patron record click More and choose Set Permissions
26899 to alter patron permissions</para>
26902 <screeninfo>Set Patron Permissions</screeninfo>
26906 <imagedata fileref="images/patrons/editpatronpermissions.png"/>
26913 <para>You will be presented with a list of preferences, some of
26914 which can be expanded by clicking the plus sign to the left of the
26915 section title.</para>
26918 <screeninfo>Patron Permissions</screeninfo>
26922 <imagedata fileref="images/patrons/GranularPermissions.png"/>
26930 <section id="patronpermsdefined">
26931 <title><link linkend="patronpermsdefined">Patron Permissions Defined</link></title>
26937 <para>superlibrarian</para>
26941 <para>Access to all librarian functions</para>
26946 <para>With this selected there is no need to choose any
26947 other permissions</para>
26956 <para>circulate</para>
26960 <para>Check out and check in items</para>
26964 <para>This section can be expanded (<link linkend="circpermissions">Learn more</link>)</para>
26970 <para>catalogue</para>
26974 <para><emphasis role="bold">Required for staff login.</emphasis> Staff access,
26975 allows viewing the catalogue in staff client<itemizedlist>
26978 <para>Must be given to all staff members to allow them to login to the staff
26982 </itemizedlist></para>
26988 <para>parameters</para>
26992 <para>Manage Koha system systems (Administration panel)</para>
26996 <para>This section can be expanded (<link linkend="parameterpermissions">Learn
26997 more</link>)</para>
27003 <para>borrowers</para>
27007 <para>Add or modify patrons</para>
27013 <para>permissions</para>
27017 <para>Set user permissions</para>
27023 <para>reserveforothers</para>
27027 <para>Place and modify holds for patrons</para>
27031 <para>This section can be expanded (<link linkend="reservepermissions">Learn more</link>)</para>
27037 <para>editcatalogue</para>
27041 <para>Edit Catalog (Modify bibliographic/holdings data)</para>
27045 <para>This section can be expanded (<link linkend="catpermissions">Learn more</link>)</para>
27051 <para>updatecharges</para>
27055 <para>Manage patrons fines and fees</para>
27058 <para>This section can be expanded (<link linkend="updatechargespermissions">Learn
27059 more</link>)</para>
27065 <para>acquisition</para>
27069 <para>Acquisition and/or suggestion management</para>
27073 <para>This section can be expanded (<link linkend="acqpermissions">Learn more</link>)</para>
27079 <para>management</para>
27083 <para>Set library management params (deprecated)<itemizedlist>
27086 <para>This permission level no longer controls anything.</para>
27089 </itemizedlist></para>
27099 <para>Use all tools</para>
27103 <para>This section can be expanded (<link linkend="toolspermissions">Learn more</link>)</para>
27109 <para>editauthorities</para>
27113 <para>Edit Authorities</para>
27119 <para>serials</para>
27123 <para>Manage serial subscriptions</para>
27127 <para>This section can be expanded (<link linkend="serpermissions">Learn more</link>)</para>
27133 <para>reports</para>
27137 <para>Allow access to the reports module</para>
27141 <para>Reports found on the Circulation page are not controlled
27142 by this permission</para>
27146 <para>This section can be expanded (<link linkend="reportpermissions">Learn more</link>)</para>
27152 <para>staffaccess</para>
27156 <para>Allow staff members to modify permissions for other staff members</para>
27161 <para>Requires the borrowers permission above</para>
27167 <para>plugins<itemizedlist>
27169 <para>Koha plugins</para>
27172 <para>This section can be expanded (<link linkend="pluginpermissions">Learn
27173 more</link>)</para>
27175 </itemizedlist></para>
27178 <para>lists<itemizedlist>
27180 <para>Koha Lists</para>
27185 <para>All staff have permission to create and modify their own lists, this
27186 permission is only necessary if you'd like to give a staff member permission
27187 to delete public lists that they have not created.</para>
27192 <para>This section can be expanded (<link linkend="listspermissions">Learn
27193 more</link>)</para>
27195 </itemizedlist></para>
27199 <section id="circpermissions">
27200 <title><link linkend="circpermissions">Granular Circulate Permissions</link></title>
27202 <para>If the staff member has 'circulate' permissions they have the
27203 ability to perform all of these actions. If you would like to
27204 control circulation permissions on a more granular level choose from
27205 these options:</para>
27209 <para>circulate_remaining_permissions</para>
27213 <para>Remaining circulation permissions</para>
27216 <para>All circulation rights except those covered by permissions listed
27222 <para>force_checkout<itemizedlist>
27224 <para>Force checkout if a limitation exists</para>
27227 <para>With this permission a librarian will be allowed to override a check out
27228 restriction in the following cases: <itemizedlist>
27230 <para>age restriction</para>
27233 <para>the item is issued to another patron</para>
27236 <para>the item is not for loan</para>
27239 <para>the patron has overdue items</para>
27242 <para>the item is lost </para>
27245 <para>the item is a high demand item</para>
27248 <para>the item is on hold</para>
27250 </itemizedlist></para>
27252 </itemizedlist></para></listitem>
27253 <listitem><para>manage_restrictions<itemizedlist>
27255 <para>Manage restrictions for accounts</para>
27258 <para>Grants permission to the staff member to lift a restriction that might be
27259 on the patron's record</para>
27261 </itemizedlist></para>
27264 <para>overdues_report<itemizedlist>
27266 <para> Execute overdue items report </para>
27269 <para>The permission to run the overdues reports found under Circulation</para>
27271 </itemizedlist></para>
27275 <para>override_renewals</para>
27279 <para>Override blocked renewals</para>
27283 <para>Requires that the staff member also has
27284 circulate_remaining_permissions</para>
27291 <section id="parameterpermissions">
27292 <title><link linkend="parameterpermissions">Granular Parameters Permissions</link></title>
27294 <para>If the staff member has 'parameters' permissions they have the
27295 ability to perform all of these actions. If you would like to
27296 control parameter permissions on a more granular level choose from
27297 these options:</para>
27301 <para>manage_circ_rules</para>
27305 <para>Manage circulation rules</para>
27308 <para>The ability to access the <link linkend="circfinerules">Circulation and
27309 fines rules</link> in the administration area</para>
27315 <para>parameters_remaining_permissions</para>
27319 <para>Remaining system parameters permissions</para>
27322 <para>The ability to access all areas in Administration (other than the
27323 Circulation and fine rules)</para>
27330 <section id="reservepermissions">
27331 <title><link linkend="reservepermissions">Granular Holds Permissions</link></title>
27333 <para>If the staff member has 'reserveforothers' permissions they
27334 have the ability to perform all of these actions. If you would like
27335 to control holds permissions on a more granular level choose from
27336 these options:</para>
27340 <para>modify_holds_priority</para>
27344 <para>Modify holds priority</para>
27347 <para>Allow staff members to alter the holds priority (moving patrons up and down
27354 <para>place_holds</para>
27358 <para>Place holds for patrons</para>
27365 <section id="catpermissions">
27366 <title><link linkend="catpermissions">Granular Cataloging Permissions</link></title>
27368 <para>If the staff member has 'editcatalogue' permissions they have
27369 the ability to perform all of these actions. If you would like to
27370 control cataloging permissions on a more granular level choose from
27371 these options:</para>
27375 <para>delete_all_items<itemizedlist>
27377 <para>Delete all items at once</para>
27380 <para>Ability to use the 'Delete all items' option found under the 'Edit' menu
27381 in cataloging</para>
27383 </itemizedlist></para>
27386 <para>edit_catalogue</para>
27390 <para>Edit catalog (Modify bibliographic/holdings data)</para>
27393 <para>Ability to access all cataloging functions via the <link linkend="cataloging">Cataloging</link> page</para>
27399 <para>edit_items</para>
27403 <para>Edit items</para>
27406 <para>Ability to make <link linkend="editingitems">edits to item/holdings
27407 records</link>, but not bibliographic records</para>
27411 <listitem id="edit_items_restricted">
27412 <para>edit_items_restricted<itemizedlist>
27414 <para>Limit item modification to subfields defined in the <link linkend="SubfieldsToAllowForRestrictedEditing">SubfieldsToAllowForRestrictedEditing</link> preference</para>
27419 <para>Please note that edit_items permission is still required</para>
27423 </itemizedlist></para>
27427 <para id="fastaddpermissions">fast_cataloging</para>
27431 <para>Fast cataloging</para>
27434 <para>The ability to catalog using only the <link linkend="fastaddcat">Fast Add
27435 Framework</link> found on the <link linkend="circulation">Circulation</link>
27442 <section id="updatechargespermissions">
27443 <title><link linkend="updatechargespermissions">Granular Fines and Charges Permissions</link></title>
27444 <para>If a staff member has 'updatecharges' permission they have the ability to perform
27445 all of these actions. If you would like to control fines and charges permissions on a
27446 more granular level choose from these options:<itemizedlist>
27448 <para>remaining_permissions<itemizedlist>
27450 <para>Remaining permissions for managing fines and fees other than the ability
27451 to write off charges</para>
27453 </itemizedlist></para>
27456 <para>writeoff<itemizedlist>
27458 <para>Write off fines and fees</para>
27460 </itemizedlist></para>
27462 </itemizedlist></para>
27465 <section id="acqpermissions">
27466 <title><link linkend="acqpermissions">Granular Acquisitions Permissions</link></title>
27468 <para>If the staff member has 'acquisition' permissions they have
27469 the ability to perform all of these actions. If you would like to
27470 control acquisitions permissions on a more granular level choose
27471 from these options:</para>
27475 <para>budget_add_del</para>
27479 <para>Add and delete budgets (but can't modify budgets)</para>
27485 <para>budget_manage</para>
27488 <para>Manage budgets</para>
27494 <para>budget_manage_all <itemizedlist>
27496 <para>Manage all budgets</para>
27498 </itemizedlist></para>
27499 <para>budget_modify</para>
27502 <para>Modify budget (can't create lines, but can modify existing ones)</para>
27508 <para>contracts_manage</para>
27512 <para>Manage contracts</para>
27518 <para>group_manage</para>
27522 <para>Manage orders and basket groups</para>
27528 <para>order_manage</para>
27532 <para>Manage orders and baskets</para>
27537 <para>order_manage_all<itemizedlist>
27539 <para>Manage all orders and baskets, regardless of restrictions on them</para>
27541 </itemizedlist></para>
27545 <para>order_receive</para>
27549 <para>Manage orders and baskets</para>
27555 <para>period_manage</para>
27559 <para>Manage periods</para>
27565 <para>planning_manage</para>
27569 <para>Manage budget planning</para>
27575 <para>vendors_manage</para>
27579 <para>Manage vendors</para>
27586 <section id="serpermissions">
27587 <title><link linkend="serpermissions">Granular Serials Permissions</link></title>
27589 <para>If the staff member has 'serials' permissions they have the
27590 ability to perform all of these actions. If you would like to
27591 control serials permissions on a more granular level choose from
27592 these options:</para>
27596 <para>check_expiration</para>
27600 <para>Check the <link linkend="serialexpiration">expiration of a
27601 serial</link></para>
27607 <para>claim_serials</para>
27611 <para>Claim missing serials via the <link linkend="serialclaims">Claims
27612 section</link></para>
27618 <para>create_subscription</para>
27622 <para>Create <link linkend="newsubscription">a new subscription</link></para>
27628 <para>delete_subscription</para>
27632 <para>Delete an existing subscription</para>
27638 <para>edit_subscription</para>
27642 <para>Edit an existing subscription</para>
27645 <para>This permission does not include the ability to delete or create a
27646 subscription</para>
27652 <para>receive_serials</para>
27656 <para>Serials receiving</para>
27659 <para>Receive serials on existing subscriptions</para>
27665 <para>renew_subscription</para>
27669 <para>Renew a subscription</para>
27675 <para>routing</para>
27679 <para>Routing</para>
27682 <para>Manage <link linkend="routinglist">routing lists</link></para>
27687 <para>superserials<itemizedlist>
27689 <para>Manage subscriptions from any branch (only applies when <link linkend="IndependentBranches">IndependantBranches</link> is used)</para>
27691 </itemizedlist></para>
27696 <section id="toolspermissions">
27697 <title><link linkend="toolspermissions">Granular Tools Permissions</link></title>
27699 <para>If the staff member has 'tools' permissions they have the
27700 ability to access and use all items under the Tools menu. If you
27701 would like to control which tools staff members have access to on a
27702 more granular level choose from these options:</para>
27706 <para>batch_upload_patron_images</para>
27710 <para>Upload patron images in batch or one at a time </para>
27713 <para>Access to the <link linkend="uploadpatronimages">Image Upload
27720 <para>delete_anonymize_patrons</para>
27724 <para>Delete old borrowers and anonymize circulation/reading history (deletes
27725 borrower reading history)</para>
27728 <para>Access to the <link linkend="anonpatrons">Anonymize Patron
27735 <para>edit_calendar</para>
27739 <para>Define days when the library is closed </para>
27742 <para>Access to the <link linkend="calholidays">Calendar/Holidays
27749 <para>edit_news</para>
27753 <para>Write news for the OPAC and staff interfaces </para>
27756 <para>Access to the <link linkend="newstool">News Tool</link></para>
27762 <para>edit_notice_status_triggers</para>
27766 <para>Set notice/status triggers for overdue items </para>
27769 <para>Access to the <link linkend="noticetriggers">Overdue Notice Status/Triggers
27776 <para>edit_notices</para>
27780 <para>Define notices </para>
27783 <para>Access to the <link linkend="notices">Notices Tool</link></para>
27789 <para>export_catalog</para>
27793 <para>Export bibliographic, authorities and holdings data </para>
27796 <para>Access to the <link linkend="exportbibs">Export Data Tool</link></para>
27802 <para>import_patrons</para>
27806 <para>Import patron data </para>
27809 <para>Access to the <link linkend="patronimport">Import Patrons Tool</link></para>
27815 <para>inventory</para>
27819 <para>Perform inventory (stocktaking) of your catalog </para>
27822 <para>Access to the <link linkend="inventory">Inventory Tool</link></para>
27828 <para>items_batchdel</para>
27832 <para>Perform batch deletion of items </para>
27835 <para>Access to the <link linkend="batchdeleteitems">Batch Item Deletion
27842 <para>items_batchmod</para>
27846 <para>Perform batch modification of items </para>
27849 <para>Access to the <link linkend="batchmodifyitems">Batch Item Modification
27854 <listitem id="items_batchmod_restricted">
27855 <para>items_batchmod_restricted<itemizedlist>
27857 <para>Limit <link linkend="batchmodifyitems">batch item modification</link> to
27858 subfields defined in the <link linkend="SubfieldsToAllowForRestrictedBatchmod">SubfieldsToAllowForRestrictedBatchmod</link> preference</para>
27863 <para>Please note that items_batchmod permission is still required</para>
27867 </itemizedlist></para>
27871 <para>label_creator</para>
27875 <para>Create printable labels and barcodes from catalog and patron data </para>
27878 <para>Access to the <link linkend="labelcreator">Label Creator</link> and <link linkend="quicklabelcreator">Quick Label Creator</link> Tools</para>
27884 <para>manage_csv_profiles</para>
27888 <para>Manage CSV export profiles</para>
27891 <para>Access to the <link linkend="csvprofiles">CSV Profiles Tool</link></para>
27897 <para>manage_staged_marc</para>
27901 <para>Manage staged MARC records, including completing and reversing imports </para>
27904 <para>Access to the <link linkend="managestaged">Manage Staged MARC Records
27911 <para>moderate_comments</para>
27915 <para>Moderate patron comments </para>
27918 <para>Access to the <link linkend="comments">Comments Tool</link>
27925 <para>moderate_tags<itemizedlist>
27927 <para>Moderate patron tags</para>
27930 <para>Access to the <link linkend="tagsmoderation">Tags Tool</link></para>
27932 </itemizedlist></para>
27935 <para>records_batchdel<itemizedlist>
27937 <para>Perform batch deletion of records (bibliographic or authority)</para>
27940 <para>Access to the <link linkend="batchrecorddelete">Batch Record Deletion
27943 </itemizedlist></para>
27946 <para>rotating_collections<itemizedlist>
27948 <para>Manage rotating collections</para>
27951 <para>Access to the <link linkend="rotatingcollections">Rotating Collections
27954 </itemizedlist></para>
27957 <para>schedule_tasks</para>
27960 <para>Schedule tasks to run </para>
27963 <para>Access to the <link linkend="taskscheduler">Task Scheduler
27970 <para>stage_marc_import</para>
27974 <para>Stage MARC records into the reservoir </para>
27977 <para>Access to the <link linkend="stagemarc">Stage MARC Records
27983 <para>upload_general_files <itemizedlist>
27985 <para>Upload any file</para>
27988 <para>Access to upload files via the <link linkend="uploadtool">Upload
27991 </itemizedlist></para>
27995 <para>upload_local_cover_images</para>
27999 <para>Upload local cover images </para>
28002 <para>Access to the <link linkend="uploadlocalimages">Upload Local Cover Image
28003 Tool</link> as well as permission to add and delete local cover images from
28004 the bib detail page</para>
28009 <para>upload_manage <itemizedlist>
28010 <listitem><para>Manage uploaded files</para></listitem>
28012 <para>Access to uploaded files via the <link linkend="uploadtool">Upload
28015 <para>upload_general_files permission is required for this permission</para>
28018 </itemizedlist></para>
28022 <para>view_system_logs</para>
28026 <para>Browse the system logs </para>
28029 <para>Access to the <link linkend="logviewer">Log Viewer Tool</link></para>
28036 <section id="reportpermissions">
28037 <title><link linkend="reportpermissions">Granular Reports Permissions</link></title>
28039 <para>If the staff member has 'reports' permissions they have the
28040 ability to perform all of these actions. If you would like to
28041 control reports permissions on a more granular level choose from
28042 these options:</para>
28046 <para>create_reports</para>
28050 <para>Create SQL Reports</para>
28053 <para>The ability to create and edit but not run SQL reports</para>
28059 <para>execute_reports</para>
28063 <para>Execute SQL Reports</para>
28066 <para>The ability to run but not create or edit SQL reports </para>
28072 <section id="pluginpermissions">
28073 <title><link linkend="pluginpermissions">Granular Plugins Permissions</link></title>
28074 <para>If the staff member has 'plugins' permissions they have the ability to perform all
28075 of these actions. If you would like to control reports permissions on a more granular
28076 level choose from these options:<itemizedlist>
28078 <para>configure<itemizedlist>
28080 <para>Configure plugins</para>
28083 <para>The ability to run the 'configure' section of a plugin if it has
28086 </itemizedlist></para>
28089 <para>manage<itemizedlist>
28091 <para>Manage plugins </para>
28094 <para>The ability to install or uninstall plugins</para>
28096 </itemizedlist></para>
28099 <para>report<itemizedlist>
28101 <para>Use report plugins</para>
28104 <para>The ability to use report plugins</para>
28106 </itemizedlist></para>
28109 <para>tool<itemizedlist>
28111 <para>Use tool plugins</para>
28114 <para>The ability to use tool plugins</para>
28116 </itemizedlist></para>
28118 </itemizedlist></para>
28120 <section id="listspermissions">
28121 <title><link linkend="listspermissions">Granular Lists Permissions</link></title>
28122 <para>All staff members have permission to access lists. This section only needs to be
28123 checked off if you want to give permission to a staff member to delete public lists that
28124 they have no created themselves.<itemizedlist>
28126 <para>delete_public_lists<itemizedlist>
28127 <listitem><para>Delete public lists</para></listitem>
28128 </itemizedlist></para>
28130 </itemizedlist></para>
28135 <section id="patroninformation">
28136 <title><link linkend="patroninformation">Patron Information</link></title>
28138 <para>When viewing a patron record you have the option to view information from one of many
28139 tabs found on the left hand side of the record.<itemizedlist>
28141 <para><emphasis role="italic">Get there:</emphasis> Patrons > Browse or search for
28142 patron > Click patron name</para>
28144 </itemizedlist></para>
28146 <section id="patcheckout">
28147 <title><link linkend="patcheckout">Check Out</link></title>
28149 <para>For instruction on checking items out, view the <link linkend="checkingout">Checking Out</link> section of this
28151 <para>Staff members can access their own check out screen by clicking their username in the
28152 top right of the staff client and choosing 'My checkouts'<screenshot>
28153 <screeninfo>My checkouts</screeninfo>
28156 <imagedata fileref="images/patrons/mycheckouts.png"/>
28159 </screenshot></para>
28162 <section id="patrondetails">
28163 <title><link linkend="patrondetails">Details</link></title>
28164 <para>Staff members can access their own account details by clicking their username in the
28165 top right of the staff client and choosing 'My account'</para>
28167 <screeninfo>My account</screeninfo>
28170 <imagedata fileref="images/patrons/myaccount.png"/>
28175 <para>All patron information will appear on the Details tab. This
28176 includes all the contact information, notes, custom patron attributes,
28177 messaging preferences, etc entered when adding the patron.</para>
28179 <para>In the case of patrons who are marked as 'Child' or
28180 'Professional' and their Guarantors additional information will appear
28181 on their record.</para>
28185 <para>A child patron will list their Guarantor</para>
28188 <screeninfo>Guarantor listed and linked from the child
28189 record</screeninfo>
28193 <imagedata fileref="images/patrons/child.png"/>
28200 <para>On the Guarantor's record, all children and/or professionals
28201 will be listed</para>
28204 <screeninfo>Guarantees listed on the Guarantor's
28205 profile</screeninfo>
28209 <imagedata fileref="images/patrons/parent.png"/>
28216 <section id="patcircsummary">
28217 <title><link linkend="patcircsummary">Circulation Summary</link></title>
28219 <para>Below the patron's information on the details screen is a
28220 tabbed display of the items they have checked out, overdue, and on
28224 <screeninfo>Checkout summary</screeninfo>
28228 <imagedata fileref="images/patrons/checkoutsummary.png"/>
28233 <para>If they have family at the library staff can see what the
28234 other family members have checked out.</para>
28237 <screeninfo>Relative checkouts</screeninfo>
28241 <imagedata fileref="images/patrons/relativecheckouts.png"/>
28245 <para>The Restrictions tab will show for all patrons. If the patron has no restrictions
28246 you will see that on the tab.</para>
28248 <screeninfo>Patron restrictions</screeninfo>
28251 <imagedata fileref="images/patrons/patronrestrictions-none.png"/>
28255 <para>If the patron has restrictions on their account the tab will show the number and the
28256 description.</para>
28258 <screeninfo>Patron restrictions</screeninfo>
28261 <imagedata fileref="images/patrons/patronrestrictions.png"/>
28265 <para>Using the 'Add manual restriction' button you can add a restriction to the patron
28266 record from here.</para>
28268 <screeninfo>Add restriction</screeninfo>
28271 <imagedata fileref="images/patrons/addrestriction.png"/>
28278 <section id="patronfines">
28279 <title><link linkend="patronfines">Fines</link></title>
28281 <para>The patron's complete accounting history will appear on the
28282 Fines tab. Contrary to its name, the Fines tab does not just show fine
28283 data, it also shows membership fees, rental fees, reserve fees and any
28284 other charge you may have for patrons.</para>
28287 <screeninfo>Patron Accounting Summary</screeninfo>
28291 <imagedata fileref="images/patrons/patronaccount.png"/>
28296 <para>The table will show you the following columns:</para>
28300 <para>Date: the date the charge/payment was posted</para>
28304 <para>In the case of fines this will be the last day that the
28305 fine was accrued</para>
28311 <para>Description: a description of the charges including the due
28312 date for overdue items and a link to the item record where one is
28317 <para>Note: any notes about this charge/payment<itemizedlist>
28319 <para>If you're allowing patrons to pay fines via the OPAC with PayPal (<link linkend="EnablePayPalOpacPayments">EnablePayPalOpacPayments</link>) you will
28320 see a Note that says 'PayPal' for items paid this way<screenshot>
28321 <screeninfo>PayPal Fines</screeninfo>
28324 <imagedata fileref="images/circ/paypalpaid.png"/>
28327 </screenshot></para>
28329 </itemizedlist></para>
28333 <para>Amount: the total amount of the payment or charge</para>
28337 <para>Outstanding: the amount still due on charge</para>
28340 <para>The ability to reverse a payment</para>
28343 <para>A link to print a receipt for that line item</para>
28346 <para>At the top of the table you can click the 'Filter paid transaction' to hide all
28347 completed transaction and above that you can use the search box to find a specific charge
28350 <section id="chargefines">
28351 <title><link linkend="chargefines">Charging Fines/Fees</link></title>
28353 <para>Most fees and fines will be charged automatically if the <link linkend="finescronjob">fines cron job</link> is running:</para>
28357 <para>Fines will be charged based on your <link linkend="circfinerules">Circulation & Fines
28358 Rules</link></para>
28362 <para>Hold fees will be charged based on the rules you set in
28363 the <link linkend="patcats">Patron Types & Categories</link>
28364 administration area</para>
28368 <para>Rental fees will be charged based on the settings in your
28369 <link linkend="itemtypeadmin">Item Types</link> administration
28374 <para>Marking an item 'Lost' via the cataloging module will
28375 automatically charge the patron the replacement cost for that
28381 <section id="payfines">
28382 <title><link linkend="payfines">Pay/Reverse Fines</link></title>
28384 <para>Each line item can be paid in full (or written off) using the
28385 'Pay Fines' tab.</para>
28388 <screeninfo>Paying Fines</screeninfo>
28392 <imagedata fileref="images/patrons/makepayment.png"/>
28399 <para>Each line item can be paid in full, partially paid, or
28400 written off.</para>
28404 <para>Pay a fine in full</para>
28408 <para>If you have a note about the payment please type that first then move
28412 <para>Click "Pay" next to the fine you want to pay in full</para>
28416 <para>The full amount of the fine will be populated for you
28417 in the "Collect From Patron" box</para>
28420 <screeninfo>Pay fine</screeninfo>
28424 <imagedata fileref="images/patrons/payfine.png"/>
28431 <para>Click "Confirm"</para>
28435 <para>The fine will be removed from outstanding fines, and
28436 displayed as fully paid.</para>
28442 <para>Pay a partial fine</para>
28446 <para>Click "Pay" next to the fine you want to partially
28451 <para>Enter the amount you are collecting from the patron in
28452 the "Collect From Patron" box</para>
28455 <screeninfo>Pay partial fine</screeninfo>
28459 <imagedata fileref="images/patrons/paypartial.png"/>
28466 <para>Click "Confirm"</para>
28470 <para>The fine will be updated to show the original Amount,
28471 and the current Amount Outstanding</para>
28477 <para>Pay an amount towards all fines</para>
28481 <para>Click the "Pay Amount" button</para>
28485 <para>Enter the amount you are collecting from the patron in
28486 "Collect from Patron." The sum of all fines is shown in
28487 "Total Amount Outstanding"</para>
28490 <screeninfo>Pay Amount</screeninfo>
28494 <imagedata fileref="images/patrons/payamount.png"/>
28501 <para>Click "Confirm"</para>
28505 <para>The fine totals will be updated with the payment
28506 applied to oldest fines first.</para>
28512 <para>Pay Selected fines</para>
28516 <para>Check the selection boxes next to the fines you wish
28517 to pay, click "Pay Selected"</para>
28520 <screeninfo>Select lines to pay</screeninfo>
28524 <imagedata fileref="images/patrons/payselected-select.png"/>
28531 <para>Enter an amount to pay towards the fines.</para>
28534 <screeninfo>Pay Selected</screeninfo>
28538 <imagedata fileref="images/patrons/payselected.png"/>
28545 <para>Click "Confirm"</para>
28549 <para>The fine totals will be updated with the payment
28550 applied to the oldest selected fines first.</para>
28556 <para>Writeoff a single fine</para>
28560 <para>Click "Writeoff" next to the fine you wish to
28565 <para>The fine will be removed from outstanding fines, and
28566 displayed as written off.</para>
28572 <para>Writeoff All fines</para>
28576 <para>Click the "Writeoff All" button</para>
28580 <para>All fines will be removed from outstanding fines, and
28581 displayed as written off.</para>
28587 <para>If you accidentally mark and item as paid, you can reverse
28588 that line item by clicking 'Reverse' to the right of the
28592 <screeninfo>Reverse Link</screeninfo>
28596 <imagedata fileref="images/patrons/reverselink.png"/>
28603 <para>Once clicked a new line item will be added to the
28604 account, showing the payment as reversed</para>
28607 <screeninfo>Reversed Payment</screeninfo>
28611 <imagedata fileref="images/patrons/reversed.png"/>
28621 <section id="manualinvoice">
28622 <title><link linkend="manualinvoice">Creating Manual Invoices</link></title>
28624 <para>For fees that are not automatically charged, librarians can
28625 create a manual invoice</para>
28628 <screeninfo>Create Manual Invoice</screeninfo>
28632 <imagedata fileref="images/patrons/manualinvoice.png"/>
28639 <para>First choose the type of invoice you would like to
28644 <para>To add additional values to the manual invoice type pull down menu, add them
28645 to the <link linkend="manualinvvals">MANUAL_INV</link> Authorized Value</para>
28650 <para>The value set as the Authorized Value for the MANUAL_INV authorized
28651 value category will appear as the Description and the Authorized Value
28652 Description will be used as the amount.</para>
28660 <para>If the fee is associated with an item you can enter its
28661 barcode so that the line item shows a link to that item</para>
28665 <para>The description field is where you will enter the
28666 description of the charge</para>
28670 <para>In the amount field, do not enter currency symbols, only
28671 numbers and decimals</para>
28676 <section id="manualcredit">
28677 <title><link linkend="manualcredit">Creating Manual Credits</link></title>
28679 <para>Manual credits can be used to pay off parts of fines, or to
28680 forgive a fine amount.</para>
28683 <screeninfo>Create Manual Credit</screeninfo>
28687 <imagedata fileref="images/patrons/manualcredit.png"/>
28694 <para>First choose the type of credit you'd like to apply</para>
28698 <para>If this credit is associated with an item you can enter
28699 that item's barcode so that the line item links to the right
28704 <para>The description field is where you will enter the
28705 description of the credit</para>
28709 <para>In the amount field, do not enter currency symbols, only
28710 numbers and decimals</para>
28715 <section id="printinglineitems">
28716 <title><link linkend="printinglineitems">Printing Invoices</link></title>
28718 <para>To the right of each account line there is a print link.
28719 Clicking that link will print an invoice for the line item that
28720 includes the date and description of the line item along with the
28721 total outstanding on the account.</para>
28724 <screeninfo>Sample Invoice</screeninfo>
28728 <imagedata fileref="images/patrons/patroninvoice.png"/>
28735 <section id="patronroutingtab">
28736 <title><link linkend="patronroutingtab">Routing Lists</link></title>
28738 <para>A list of all of the serial routing lists the patron belongs to
28739 will be accessible via the 'Routing Lists' tab on the patron
28743 <screeninfo>Routing Lists</screeninfo>
28747 <imagedata fileref="images/patrons/routinglisttab.png"/>
28752 <para>On this tab you will be able to see and edit all of the routing
28753 lists that this patron is on.</para>
28756 <screeninfo>Patron's routing lists</screeninfo>
28760 <imagedata fileref="images/patrons/patronroutinglists.png"/>
28766 <section id="circhistory">
28767 <title><link linkend="circhistory">Circulation History</link></title>
28769 <para>The circulation history tab will appear if you have set the
28770 <link linkend="intranetreadinghistory">intranetreadinghistory</link>
28771 preference to allow it to appear. If you have the <link linkend="OPACPrivacy">OPACPrivacy</link> system preference set to
28772 'Allow' and the patron has decided that the library cannot keep this
28773 information this tab will only show currently checked out
28777 <screeninfo>Patron Circulation History</screeninfo>
28781 <imagedata fileref="images/patrons/readinghistory.png"/>
28786 <para>If you would like to export a list of barcodes for the items
28787 checked in today you can find that option under the More menu on the
28788 top right of the page.</para>
28791 <screeninfo>Export today's checkins</screeninfo>
28795 <imagedata fileref="images/patrons/readinghistory-export.png"/>
28800 <para>This will generate a text file with one barcode per line.</para>
28803 <section id="patmodlog">
28804 <title><link linkend="patmodlog">Modification Log</link></title>
28806 <para>If you have set your <link linkend="BorrowersLog">BorrowersLog</link> to track changes to patron
28807 records, then this tab will appear. The Modification Log will show
28808 when changes were made to the patron record. If you also have turned
28809 on the <link linkend="IssueLog">IssueLog</link> and <link linkend="ReturnLog">ReturnLog</link> you will see checkins and outs on
28810 this screen as well.</para>
28813 <screeninfo>Changes to Patron</screeninfo>
28817 <imagedata fileref="images/patrons/borrowerlog.png"/>
28824 <para>The Librarian field shows the patron number for the
28825 librarian who made the changes</para>
28829 <para>The module lists 'MEMBERS' for the patron module</para>
28833 <para>The action will tell you what action was being logged</para>
28837 <para>The Object field lists the borrowernumber that is being
28838 modified (in the example above, it was my changing my own
28844 <section id="patnotices">
28845 <title><link linkend="patnotices">Notices</link></title>
28847 <para>The <link linkend="setpatronmessaging">patron's messaging
28848 preferences</link> are set when <link linkend="addnewpatron">adding</link> or <link linkend="editpatrons">editing</link> the patron. This tab will show
28849 the messages that have been sent and those that are queued to be
28853 <screeninfo>Patron Notices Tab</screeninfo>
28857 <imagedata fileref="images/patrons/patnoticestab.png"/>
28862 <para>Clicking on the message title will expand the view to show you
28863 the full text of the message that was sent.</para>
28866 <screeninfo>Full message text</screeninfo>
28870 <imagedata fileref="images/patrons/patnoticestab-full.png"/>
28874 <para>If the message has a status of sent or failed you will have the option to 'resend' the
28875 message to the patron by clicking the 'resentd button found under the status.</para>
28877 <screeninfo>Resend notice</screeninfo>
28880 <imagedata fileref="images/patrons/resendnotice.png"/>
28886 <section id="patronstatstab">
28887 <title><link linkend="patronstatstab">Statistics</link></title>
28889 <para>Depending on what you set for the values of your <link linkend="StatisticsFields">StatisticsFields</link> system preference,
28890 you can see statistics for one patron's circulation actions.</para>
28893 <screeninfo>Patron's Statistics</screeninfo>
28897 <imagedata fileref="images/patrons/patronstats.png"/>
28903 <section id="patronfiles">
28904 <title><link linkend="patronfiles">Files</link></title>
28906 <para>If you set the <link linkend="EnableBorrowerFiles">EnableBorrowerFiles</link> preference to
28907 'Do' the Files tab will be visible on the patron information
28911 <screeninfo>Patron Files Tab</screeninfo>
28915 <imagedata fileref="images/patrons/patronfilestab.png"/>
28920 <para>From here you can upload files to attach to the patron
28924 <screeninfo>Upload patron files</screeninfo>
28928 <imagedata fileref="images/patrons/nopatronfiles.png"/>
28933 <para>All files that are uploaded will appear above a form where
28934 additional files can be uploaded from.</para>
28937 <screeninfo>List of files on the patron record</screeninfo>
28941 <imagedata fileref="images/patrons/patronfileslist.png"/>
28946 <section id="patronsuggestions">
28947 <title><link linkend="patronsuggestions">Purchase Suggestions</link></title>
28948 <para>If the patron has made any purchase suggestions you will see a purchase suggestions
28949 tab on the patron record.<screenshot>
28950 <screeninfo>Patron purchase suggestions</screeninfo>
28953 <imagedata fileref="images/patrons/purchasesuggestions.png"/>
28956 </screenshot></para>
28957 <para>From here you can see all suggestions made by the patron and their status, you can
28958 also create a purchase suggestion on the patron's behalf by clicking the 'New purchase
28959 suggestion' button at the top.</para>
28960 <para>Learn more about <link linkend="purchasesuggest">Purchase suggestions</link> in the
28961 <link linkend="acqmodule">Acquisitions</link> chapter of this manual.</para>
28963 <section id="patrondischarge">
28964 <title><link linkend="patrondischarge">Patron discharges</link></title>
28965 <para>A discharge is a certificate that says the patron has no current checkouts, no holds
28966 and owe no money. To enable this option on the patron record you need to set the <link linkend="useDischarge">useDischarge</link> system preference to 'Allow'.</para>
28968 <para>In France a "quitus" ("discharge") is needed if you want to register for an
28969 account in a library or a university). </para>
28972 <para>Academic libraries often require that you have a clear record at the library
28973 before you can graduate.</para>
28975 <para>Patrons can <link linkend="opacdischarge">request discharges via the OPAC</link>. Any
28976 pending discharges will be listed below the menu buttons on the main staff client page<screenshot>
28977 <screeninfo>Pending discharges</screeninfo>
28980 <imagedata fileref="images/patrons/dischargepending.png"/>
28983 </screenshot></para>
28984 <para>Clicking the pending requests will open a screen where you can allow those discharges<screenshot>
28985 <screeninfo>Pending discharges</screeninfo>
28988 <imagedata fileref="images/patrons/dischargependingapprove.png"/>
28991 </screenshot></para>
28992 <para>To generate a discharge for a specific patron click the 'Discharge' tab on the left of
28993 the patron record<screenshot>
28994 <screeninfo>Discharge</screeninfo>
28997 <imagedata fileref="images/patrons/discharge.png"/>
29000 </screenshot></para>
29001 <para>If the patron can have a discharge generated then it will have a button that says
29002 'Generate discharge'</para>
29004 <screeninfo>Generate discharge</screeninfo>
29007 <imagedata fileref="images/patrons/generatedischarge.png"/>
29011 <para>If not then you'll see an error explaining why you can't discharge the patron.</para>
29013 <screeninfo>Cannot discharge</screeninfo>
29016 <imagedata fileref="images/patrons/cantdischarge.png"/>
29020 <para>Once the letter is generated you will have a PDF to download</para>
29022 <screeninfo>Discharge letter</screeninfo>
29025 <imagedata fileref="images/patrons/dischargeletter.png"/>
29030 <para>You can style the PDF using the <link linkend="NoticeCSS">NoticeCSS</link>
29033 <para>The patron will have a restriction added to their account<screenshot>
29034 <screeninfo>Discharge restriction</screeninfo>
29037 <imagedata fileref="images/patrons/dischargerestrict.png"/>
29040 </screenshot></para>
29041 <para>And a history of discharges will be added to the 'Discharge' tab<screenshot>
29042 <screeninfo>Discharge history</screeninfo>
29045 <imagedata fileref="images/patrons/dischargehistory.png"/>
29048 </screenshot></para>
29054 <section id="patronsearch">
29055 <title><link linkend="patronsearch">Patron Search</link></title>
29057 <para>Clicking on the link to the Patron module will bring you to a search/browse screen for
29058 patrons. From here you can search for a patron by any part of their name or their card
29062 <screeninfo>Patron Search</screeninfo>
29066 <imagedata fileref="images/patrons/patronsearch.png"/>
29070 <para>Clicking the small plus sign [+] to the right of the search box will open up an advanced
29071 patron search with more filters including the ability to limit to a specific category and/or library.</para>
29073 <screeninfo>Expanded patron search</screeninfo>
29076 <imagedata fileref="images/patrons/patronsearchexpand.png"/>
29080 <para>You can also filter your patron results using the search options on the left hand side
29081 of the page.<screenshot>
29082 <screeninfo>Patron search filters</screeninfo>
29085 <imagedata fileref="images/patrons/patronsearchfilters.png"/>
29088 </screenshot></para>
29090 <para>Depending on what you have chosen for the 'Search fields' you can
29091 search for patrons in various different ways.</para>
29094 <screeninfo>Patron Search Fields</screeninfo>
29098 <imagedata fileref="images/patrons/patronfieldsearch.png"/>
29105 <para>Standard:</para>
29109 <para>Enter any part of their name, username, email address or
29116 <para>Email:</para>
29120 <para>Enter any part of their email address and choose 'Contains' instead of 'Starts
29127 <para>Borrower number:</para>
29131 <para>Enter the Koha borrower number</para>
29137 <para>Phone number:</para>
29141 <para>Enter the phone number exactly as it is in the system or
29142 by using spaces between each batch of numbers.</para>
29146 <para>Example: To find (212) 555-1212 you can search for it
29147 exactly as it was entered or by searching for 212 555
29154 <para>Street address:</para>
29158 <para>Enter any part of the patron's address (includes all address fields) and choose
29159 'Contains' instead of 'Starts with' to find the string anywhere in the
29165 <para>Date of birth<itemizedlist>
29167 <para>Birth dates should be entered using the format set forth in the <link linkend="dateformat">dateformat</link> preference. </para>
29169 </itemizedlist></para>
29172 <para>Sort field 1<itemizedlist>
29174 <para>This is a custom field that libraries can use for any type of data about the
29177 </itemizedlist></para>
29180 <para>Sort field 2<itemizedlist>
29182 <para>This is a custom field that libraries can use for any type of data about the
29185 </itemizedlist></para>
29188 <para>You can also choose to either search for fields that start with the string you entered
29189 or contain the string. Choosing 'Contains' will work like a wildcard search.</para>
29191 <screeninfo>Contains or Starts with Search</screeninfo>
29194 <imagedata fileref="images/patrons/patronsearchcontains.png"/>
29199 <para>You can also browse through the patron records by clicking on the
29200 linked letters across the top.</para>
29203 <screeninfo>Patron Browse</screeninfo>
29207 <imagedata fileref="images/patrons/patronbrowse.png"/>
29214 <chapter id="circulation">
29215 <title>Circulation</title>
29217 <para>Circulation functions can be accessed in several different ways. On
29218 the main page of the staff client there are some quick links in the center
29219 of the page to check items out, in or transfer them. For a complete
29220 listing of Circulation functions you can visit the Circulation page which
29221 is linked from the top left of every page or from the center of the main
29224 <para>Before circulating your collection you will want to set your <link linkend="globalsysprefs">Global System Preferences</link>, <link linkend="basicparams">Basic Parameters</link> and <link linkend="patscirc">Patrons & Circulation Rules</link>.</para>
29226 <para>While in Circulation you can jump between the tabs on the quick
29227 search box at the top of the screen by using the following hot
29232 <para>jump to the catalog search with Alt+Q</para>
29236 <para>jump to the checkout with Alt+U</para>
29240 <para>this will not work for Mac users</para>
29246 <para>jump to the checkin with Alt+R</para>
29251 <para>Mac users use the OPTION button in place of ALT</para>
29254 <section id="checkingout">
29255 <title><link linkend="checkingout">Check Out (Issuing)</link></title>
29257 <para>To begin the checkout process you must enter the patron barcode or
29258 part of their name. The checkout option appears in three main
29263 <para>Check out option on the top of the main staff client</para>
29266 <screeninfo>Check out box on main Koha Staff Client
29271 <imagedata fileref="images/circ/checkoutmain.png"/>
29278 <para>Check out option on the patron record</para>
29281 <screeninfo>Check out tab on a patron record</screeninfo>
29285 <imagedata fileref="images/circ/checkoutpatron.png"/>
29291 <para>If you have enabled <link linkend="batchcheckoutprefs">batch checkouts</link> then
29292 click the batch check out option on the patron record<screenshot>
29293 <screeninfo>Batch checkout</screeninfo>
29296 <imagedata fileref="images/circ/batchcheckout.png"/>
29299 </screenshot></para>
29303 <para>Check out option on the quick search bar on the circulation
29307 <screeninfo>Check out tab on quick search bar</screeninfo>
29311 <imagedata fileref="images/circ/circquickbox.png"/>
29318 <section id="checkitemout">
29319 <title><link linkend="checkitemout">Checking Items Out</link></title>
29321 <para>To check an item out to a patron, first search for that patron using one of the many
29322 options listed above. You will then be presented with the checkout screen.</para>
29324 <screeninfo>Check Out Screen</screeninfo>
29327 <imagedata fileref="images/circ/checkingout-noshow.png"/>
29331 <para>If you have chosen to 'Always show checkouts immediately' then you will see the list
29332 of checkouts below the check out box.</para>
29335 <screeninfo>Check Out Screen</screeninfo>
29339 <imagedata fileref="images/circ/checkingout.png"/>
29344 <para>At the top of the Check Out screen is a box for you to type or
29345 scan the item's barcode into.</para>
29350 <para>Many modern barcode scanners will send a 'return' to the
29351 browser, making it so that the 'Check Out' button is
29352 automatically clicked</para>
29357 <para>If the barcode is not found you will be prompted to use fast cataloging to add the
29358 item. Learn more about <link linkend="fastaddcat">fast cataloging</link> later in this
29362 <para>If you have <link linkend="itemBarcodeFallbackSearch">itemBarcodeFallbackSearch</link> set to 'Enable' then you can enter a keyword
29363 search in this box instead of just a barcode (this will make it possible to check out
29364 using title and/or call number).</para>
29367 <para>To see more checkout options click the 'Checkout settings' link to expand the checkout area.<screenshot>
29368 <screeninfo>Checkout settings</screeninfo>
29371 <imagedata fileref="images/circ/checkoutsettings.png"/>
29374 </screenshot></para>
29376 <para>Below the box for the barcode there may be options for you to
29377 override the default due date for the item.</para>
29381 <para>This option will only appear if you have set the <link linkend="SpecifyDueDate">SpecifyDueDate</link> system preference
29382 to allow staff to override the due date</para>
29385 <para>Below the box for the barcode you will see a checkbox for 'Automatic renewal'. This
29386 will allow this item to automatically renew if the <link linkend="autorenewcron"
29387 >appropriate cron job</link> is running and there are no holds on the item.</para>
29388 <para>Next is an option to no decrease the loan length based on holds. This overrides the
29389 <link linkend="decreaseLoanHighHolds">decreaseLoanHighHolds</link> preference.</para>
29390 <para>If you're allowing the <link linkend="OnSiteCheckouts">checkout of items on
29391 site</link> to patrons (these are usually items that are not for loan that you would
29392 like to check for in library use) then you will see the 'On-site checkout' checkbox after
29393 clicking the 'Checkout settings' link to expand your circulation options.<screenshot>
29394 <screeninfo>On-site checkout</screeninfo>
29397 <imagedata fileref="images/circ/allowonsitecheckout.png"/>
29400 </screenshot></para>
29402 <para>At the bottom of the page there is a summary of the patron's
29403 current checked out items along with the due date (and time if the
29404 item is an hourly loan), items checked out today will appear at the
29408 <para>Items that are hourly loan items will include the time with the due date.</para>
29412 <screeninfo>Patron's checkout summary</screeninfo>
29416 <imagedata fileref="images/circ/checkoutsummary.png"/>
29420 <para>If you checked out an item for on site use you will see that highlighted in red in the
29421 checkout summary.</para>
29423 <screeninfo>Patron's on-site checkout </screeninfo>
29426 <imagedata fileref="images/circ/onsitecheckout.png"/>
29430 <para>If you have set your <link linkend="ExportWithCsvProfile">ExportWithCsvProfile</link>
29431 preference, you will also see the option to export the patron's current checkout
29432 information using a CSV Profile or ISO2709 (MARC21) format.</para>
29434 <screeninfo>Export patron's checkout information</screeninfo>
29437 <imagedata fileref="images/circ/exportcheckouts.png"/>
29442 <para>Also at the bottom of the page is the list of items the patron
29446 <screeninfo>Holds summary on check out screen</screeninfo>
29450 <imagedata fileref="images/circ/holdssummary.png"/>
29455 <para>From the holds list you can suspend or resume patrons holds
29456 using the options at the bottom of the list if you have the <link linkend="SuspendHoldsIntranet">SuspendHoldsIntranet</link> preference
29457 set to 'allow.'</para>
29460 <para>If you have your <link linkend="AutoResumeSuspendedHolds">AutoResumeSuspendedHolds</link>
29461 preference set to "Don't allow" then you will not have the option to
29462 put an end date on the hold suspension</para>
29465 <para>If there are notes on the patron record these will appear to the
29466 right of the checkout box</para>
29469 <screeninfo>Patron notes on check out screen</screeninfo>
29473 <imagedata fileref="images/circ/patronnotes.png"/>
29478 <para>If the patron has a hold waiting at the library that too will
29479 appear to the right of the check out box making it easy for the
29480 circulation librarian to see that there is another item to give the
29484 <screeninfo>Hold waiting message on check out screen</screeninfo>
29488 <imagedata fileref="images/circ/holdwaiting.png"/>
29492 <para>The details of the checkouts will appear on the bib detail page in the staff client as
29495 <screeninfo>Circulation information on holdings tab</screeninfo>
29498 <imagedata fileref="images/circ/circonholdings.png"/>
29503 <section id="printcircreceipt">
29504 <title><link linkend="printcircreceipt">Printing Receipts</link></title>
29506 <para>Once you have checked out all of the items for the patron you
29507 can print them a receipt by choosing one of two methods.</para>
29509 <para>If you have the <link linkend="CircAutoPrintQuickSlip">CircAutoPrintQuickSlip</link>
29510 preference set to 'open a print quick slip window' you can simply
29511 hit enter on your keyboard or scan a blank piece of paper with your
29512 barcode scanner. The idea being that you're "checking out" a blank
29513 barcode which triggers Koha to print the 'Quick slip.'</para>
29515 <para>You can also click the Print button at the top of the screen
29516 and choose 'Print slip' or 'Print quick slip'.</para>
29519 <screeninfo>Print receipt to slip printer</screeninfo>
29523 <imagedata fileref="images/circ/printslip.png"/>
29528 <para>If you choose 'Print slip' it will print all of the items the
29529 patron has checked out, including those they checked out at an
29530 earlier date. Choosing 'Print quick slip' will print only the items
29531 that were checked out today.</para>
29532 <para>'Print summary' will generate a full page summary for the patron's circulation
29533 information and 'Print overdues' will print out a slip that lists all items that are
29536 <para>What prints on the slips can be customized by altering the
29537 slip templates under the <link linkend="notices">Notices &
29538 Slips</link> tool.</para>
29541 <section id="clearpatroninfo">
29542 <title><link linkend="clearpatroninfo">Clear Patron Information</link></title>
29544 <para>When you're done checking an item out if you have the <link linkend="DisplayClearScreenButton">DisplayClearScreenButton</link>
29545 preference set to 'Show' you can clear the current patron by
29546 clicking the X in the top right of the patron's info to remove the
29547 current patron from the screen and start over.</para>
29550 <screeninfo>Clear Screen Button</screeninfo>
29554 <imagedata fileref="images/admin/globalprefs/DisplayClearScreenButton.png"/>
29559 <para>If you have the <link linkend="CircAutoPrintQuickSlip">CircAutoPrintQuickSlip</link>
29560 preference set to 'clear the screen' then you simply need to hit
29561 enter or scan a blank barcode and the screen will be cleared of the
29562 current patron.</para>
29565 <section id="batchcheckout">
29566 <title><link linkend="batchcheckout">Batch Checkouts</link></title>
29567 <para>If you would like to perform a batch check out you can do so by turning on the <link linkend="BatchCheckouts">BatchCheckouts</link> system preference and assigning the
29568 proper patron categories via the <link linkend="BatchCheckoutsValidCategories">BatchCheckoutsValidCategories</link> preference. This will allow you to use an RFID
29569 pad that reads multiple barcodes or perform a batch check out for training internal use.<screenshot>
29570 <screeninfo>Batch checkouts</screeninfo>
29573 <imagedata fileref="images/circ/batchcheckoutscan.png"/>
29576 </screenshot></para>
29577 <para>From this screen you can scan several barcodes or load a file of barcodes. If those
29578 items cannot be checked out they will provide a warning on the following screen</para>
29580 <screeninfo>Batch checkout warnings</screeninfo>
29583 <imagedata fileref="images/circ/batchcheckoutwarn.png"/>
29587 <para>If you are using a statistical patron type then you'll see that local use was recorded
29588 for each item you scanned.</para>
29590 <screeninfo>Batch local use</screeninfo>
29593 <imagedata fileref="images/circ/batchlocaluse.png"/>
29599 <section id="checkoutmsg">
29600 <title><link linkend="checkoutmsg">Check Out Messages</link></title>
29602 <para>If you check out an item that has multiple pieces and you have
29603 cataloged that information in subfield 3 of the item record (in
29604 MARC21) a message will pop up when you check out that item telling you
29605 how many pieces should be there.</para>
29608 <screeninfo>Materials in the checked out item</screeninfo>
29612 <imagedata fileref="images/circ/materialspecified.png"/>
29617 <para>There are times when Koha will prevent the librarian from being
29618 able to check out items to a patron. When this happens a warning will
29619 appear notifying the librarian of why the patron cannot check items
29624 <para>Patron owes too much in fines</para>
29627 <screeninfo>Patron owes too much in fines</screeninfo>
29631 <imagedata fileref="images/circ/fineswarning.png"/>
29638 <para>You can set the amount at which patron checkouts are
29639 blocked with the <link linkend="noissuescharge">noissuescharge</link> system
29646 <para>Patron has a restriction on their account</para>
29649 <screeninfo>Patron account restricted</screeninfo>
29653 <imagedata fileref="images/circ/debarwarning.png"/>
29660 <para>This can be set by the librarian editing a patron record and adding a <link linkend="patronflags">restriction</link> or by the <link linkend="noticetriggers">Overdue/Notice Status Triggers</link></para>
29663 <para>If the staff member has the right permission they can override the restriction
29666 <screeninfo>Patron account restricted</screeninfo>
29669 <imagedata fileref="images/circ/overridetemporarily.png"/>
29678 <para>Patron needs to confirm their address</para>
29681 <screeninfo>Patron's address warning</screeninfo>
29685 <imagedata fileref="images/circ/addresswarning.png"/>
29692 <para>This can be set by the librarian editing a patron record
29693 and adding a <link linkend="patronflags">flag</link></para>
29699 <para>Patrons has lost their library card</para>
29702 <screeninfo>Lost patron card warning</screeninfo>
29706 <imagedata fileref="images/circ/lostcardwarning.png"/>
29713 <para>This can be set by the librarian editing a patron record
29714 and adding a <link linkend="patronflags">flag</link></para>
29721 <section id="checkoutwarn">
29722 <title><link linkend="checkoutwarn">Check Out Warnings</link></title>
29724 <para>Sometimes checkouts will trigger warning messages that will
29725 appear in a yellow box above the check out field. These warnings need
29726 to be acknowledged before you will be able to continue checking items
29731 <para>Patron has outstanding fines</para>
29734 <screeninfo>Patron has a debt</screeninfo>
29738 <imagedata fileref="images/circ/warnings/patrondebt.png"/>
29745 <para>Item on hold for someone else</para>
29748 <screeninfo>Item is on hold for someone else</screeninfo>
29752 <imagedata fileref="images/circ/warnings/onhold.png"/>
29759 <para>Item should be on the hold shelf waiting for someone
29763 <screeninfo>Item is on hold shelf waiting for someone
29768 <imagedata fileref="images/circ/warnings/holdwaiting.png"/>
29775 <para>Item already checked out to this patron</para>
29778 <screeninfo>Item is currently checked out to this
29779 patron</screeninfo>
29783 <imagedata fileref="images/circ/warnings/alreadycheckedout.png"/>
29790 <para>Item checked out to another patron</para>
29793 <screeninfo>Item checked out to another patron</screeninfo>
29797 <imagedata fileref="images/circ/warnings/checkedoutelse.png"/>
29803 <para>This warning will allow you to place a hold on the item for the patron you're
29804 trying to check it out to.</para>
29810 <para>Item not for loan</para>
29813 <screeninfo>Item is not normally for loan</screeninfo>
29817 <imagedata fileref="images/circ/warnings/notforloan.png"/>
29824 <para>Patron has too many things checked out and <link linkend="AllowTooManyOverride">AllowTooManyOverride</link> is set to 'Allow'</para>
29827 <screeninfo>Too many checkouts</screeninfo>
29831 <imagedata fileref="images/circ/warnings/toomanycheckouts.png"/>
29837 <para>Patron has too many things checked out and <link linkend="AllowTooManyOverride">AllowTooManyOverride</link> is set to "Don't allow"</para>
29839 <screeninfo>Too many checkouts</screeninfo>
29842 <imagedata fileref="images/circ/warnings/toomanycheckouts-no.png"/>
29849 <para>Item cannot be renewed</para>
29852 <screeninfo>No more renewals</screeninfo>
29856 <imagedata fileref="images/circ/warnings/norenewals.png"/>
29863 <para>This can be overridden with the <link linkend="AllowRenewalLimitOverride">AllowRenewalLimitOverride</link>
29864 system preference</para>
29870 <para>Barcode not found</para>
29873 <screeninfo>Barcode not found</screeninfo>
29877 <imagedata fileref="images/circ/barcodefastadd.png"/>
29884 <para>Learn more about <link linkend="fastaddcat">fast
29885 cataloging</link> later in this manual.</para>
29891 <para>Item being checked out is marked as 'lost'</para>
29895 <para>Depending on the value in your <link linkend="IssueLostItem">IssueLostItem</link> preference, you
29896 may just see a warning</para>
29899 <screeninfo>Warning that item is lost</screeninfo>
29903 <imagedata fileref="images/circ/lostitemmsg.png"/>
29908 <para>or a confirmation box</para>
29911 <screeninfo>Confirm checkout of lost item</screeninfo>
29915 <imagedata fileref="images/circ/lostitemconfirm.png"/>
29924 <para>Item being checked out is not recommended for a patron of
29928 <screeninfo>Age warning</screeninfo>
29932 <imagedata fileref="images/circ/warnings/agewarning.png"/>
29938 <para>Item being checked out meets the <link linkend="decreaseLoanHighHolds">decreaseLoanHighHolds</link> system preference criteria</para>
29940 <screeninfo>Too many holds</screeninfo>
29943 <imagedata fileref="images/circ/warnings/decreaseLoanHighHoldsDuration.png"/>
29952 <section id="circrenew">
29953 <title><link linkend="circrenew">Renewing</link></title>
29955 <para>Checked out items can be renewed (checked out for another period of time) based on your
29956 <link linkend="circfinerules">circulation rules</link> and <link linkend="RenewalPeriodBase">renewal preferences</link>. </para>
29957 <para>If <link linkend="OpacRenewalAllowed">you allow it</link>, patrons can renew their own
29958 items via the OPAC, but sometimes you'll need to help them by renewing their items via the
29959 staff client. </para>
29960 <para>To renew items checked out to a patron, you can do one of two things. </para>
29961 <para>The first is to visit their details page or checkout page and review their checkout
29962 summary at the bottom.</para>
29965 <screeninfo>Circulation Summary</screeninfo>
29969 <imagedata fileref="images/circ/circsummary.png"/>
29974 <para>In the Renew column you will see how many times each item has been
29975 renewed and a checkbox to renew the item for the patron. Check the boxed
29976 of the items you would like to renew and click the 'Renew or Return
29977 checked items' button, or to renew all items checked out to the patron
29978 simply click the 'Renew all' button.</para>
29981 <screeninfo>Renew buttons</screeninfo>
29985 <imagedata fileref="images/circ/renewbutton.png"/>
29990 <para>Sometimes renewals will be blocked based on your circulation
29991 rules, to override this block you must have your <link linkend="AllowRenewalLimitOverride">AllowRenewalLimitOverride</link>
29992 preference set to 'Allow'. If you allow renewal limit overrides, you
29993 will see a checkbox at the bottom left of the circulation summary. Check
29994 that box and then choose the items you would like to renew.</para>
29997 <screeninfo>Override renewal limit</screeninfo>
30001 <imagedata fileref="images/circ/overriderenew.png"/>
30006 <para>Checking that box will add checkboxes in the renew column above
30007 where before the item was not renewable.</para>
30008 <para>The second option is to visit the 'Renew' page found under the Circulation menu.</para>
30010 <screeninfo>Renew</screeninfo>
30013 <imagedata fileref="images/circ/renewcirc.png"/>
30017 <para>And scan the barcodes of the items you would like to renew.</para>
30019 <screeninfo>Barcode to renew</screeninfo>
30022 <imagedata fileref="images/circ/renewbarcode.png"/>
30026 <para>If the item is renewed you will receive a confirmation message.</para>
30028 <screeninfo>Item renewed</screeninfo>
30031 <imagedata fileref="images/circ/renewed.png"/>
30035 <para>If the barcode is not found you will be presented with an error.</para>
30037 <screeninfo>No barcode found</screeninfo>
30040 <imagedata fileref="images/circ/renewnomatch.png"/>
30044 <para>If the item is not actually checked out you will also receive an error.</para>
30046 <screeninfo>Item not checked out</screeninfo>
30049 <imagedata fileref="images/circ/renewnotchecked.png"/>
30055 <section id="checkingin">
30056 <title><link linkend="checkingin">Check In (Returning)</link></title>
30058 <para>Checking in items can be performed from various different
30063 <para>The check in box on the top of the main staff client</para>
30066 <screeninfo>Check out box on main Koha Staff Client
30071 <imagedata fileref="images/circ/checkinmain.png"/>
30078 <para>The check in option on the quick search bar on the Circulation
30081 <screeninfo>Check in tab on quick search bar</screeninfo>
30085 <imagedata fileref="images/circ/checkinquickbox.png"/>
30092 <para>The check in link on the patron's checkout summary (and on the
30093 checkout summary page)</para>
30096 <screeninfo>Patron checkout summary includes 'Check In'
30101 <imagedata fileref="images/circ/checkinlink.png"/>
30108 <para>The Check in page under the Circulation menu</para>
30111 <screeninfo>Check in link on Circulation Module</screeninfo>
30115 <imagedata fileref="images/circ/checkincirc.png"/>
30122 <section id="checkitemin">
30123 <title><link linkend="checkitemin">Checking Items In</link></title>
30125 <para>To check an item in scan the barcode for the item into the box
30126 provided. A summary of all items checked in will appear below the
30130 <screeninfo>Check In Summary</screeninfo>
30134 <imagedata fileref="images/circ/checkin.png"/>
30139 <para>If you are checking items in that were put in the book drop while the library was
30140 closed you can check the 'Book drop mode' box before scanning items. This will effectively
30141 roll back the returned date to the last date the library was open.</para>
30145 <para>This requires that you have your closings added to the <link linkend="calholidays">Holidays & Calendar Tool </link></para>
30149 <para>You can also choose to forgive all overdue charges for items you
30150 are checking in by checking the 'Forgive overdue charges' box before
30151 scanning items.</para>
30152 <para>If you have the <link linkend="SpecifyReturnDate">SpecifyReturnDate</link> preference
30153 set to 'Allow' you will be able to arbitrarily set the return date from below the check in box.<screenshot>
30154 <screeninfo>Specify check in date</screeninfo>
30157 <imagedata fileref="images/circ/SpecifyReturnDate.png"/>
30160 </screenshot></para>
30163 <section id="checkinmsg">
30164 <title><link linkend="checkinmsg">Check In Messages</link></title>
30166 <para>There are several messages that can appear when checking items
30171 <para>If you are checking an item in at a library other than the
30172 home branch, a message will appear asking you to transfer the book
30173 to the home library</para>
30176 <screeninfo>Check in Transfer Message</screeninfo>
30180 <imagedata fileref="images/circ/checkintransfer.png"/>
30187 <para>After this item is checked in the status of the item
30188 will be changed in the catalog to 'in transit'</para>
30191 <screeninfo>In Transit Status</screeninfo>
30195 <imagedata fileref="images/circ/transferstatus.png"/>
30202 <para>To mark an item as back at the home branch, check the
30203 item in at the home branch</para>
30206 <screeninfo>Check In Transferred Item</screeninfo>
30210 <imagedata fileref="images/circ/transfercheckin.png"/>
30217 <para>A message will appear tell you that the item is not
30218 checked out, but the status will now say available in the
30219 catalog. This step is necessary to mark items as received
30220 by the home branch.</para>
30228 <para>If you are checking in an item that should have multiple
30229 parts or pieces a message will appear warning you about the number
30230 of pieces you should have in your hand</para>
30233 <screeninfo>Materials Specified</screeninfo>
30237 <imagedata fileref="images/circ/materialspecified.png"/>
30244 <para>If you're checking an item in that has a hold on it, you
30245 will be prompted to confirm the hold</para>
30248 <screeninfo>Hold Found Check In Message</screeninfo>
30252 <imagedata fileref="images/circ/holdfound.png"/>
30259 <para>Clicking the Confirm hold button will mark the item as
30260 waiting for pickup from the library</para>
30263 <screeninfo>Hold waiting at the library</screeninfo>
30267 <imagedata fileref="images/circ/waitingstatus.png"/>
30274 <para>Clicking the Print Slip and Confirm button will mark the
30275 item as waiting for pickup at the library and present the
30276 library with a receipt to print and place on the book with the
30277 patron's information</para>
30281 <para>Ignoring the hold will leave the item on hold, but leave
30282 its status as Available (it will not cancel the hold)</para>
30288 <para>If you're checking in an item that has a hold on it at
30289 another branch you will be prompted to confirm and transfer the
30293 <screeninfo>Hold found for another branch</screeninfo>
30297 <imagedata fileref="images/circ/holdconfirmtransfer.png"/>
30304 <para>Clicking the Confirm hold and Transfer button will mark
30305 the item as in transit to the library where the hold was
30309 <screeninfo>In transit hold status</screeninfo>
30313 <imagedata fileref="images/circ/intransithold.png"/>
30320 <para>Clicking the Print Slip, Transfer and Confirm button
30321 will mark the item as in transit to the library where the hold
30322 was placed and present the library with a receipt to print and
30323 place on the book with the patron's information</para>
30327 <para>Ignoring the hold will leave the item on hold, but leave
30328 its status as Available (it will not cancel the hold)</para>
30334 <para>If you have the system showing you fines at the time of
30335 checkin (<link linkend="FineNotifyAtCheckin">FineNotifyAtCheckin</link>) you will
30336 see a message telling you about the fine and providing you a link
30337 to the payment page for that patron</para>
30340 <screeninfo>FineNotifyAtCheckin</screeninfo>
30344 <imagedata fileref="images/admin/globalprefs/FineNotifyAtCheckin.png"/>
30353 <section id="circmessages">
30354 <title><link linkend="circmessages">Circulation Messages</link></title>
30356 <para>Circulation messages are short messages that librarians can leave
30357 for their patrons or their colleagues that will appear at the time of
30358 circulation.</para>
30360 <section id="setcircmsg">
30361 <title><link linkend="setcircmsg">Setting up Messages</link></title>
30363 <para>Circulation messages are set up as <link linkend="authorizedvalues">Authorized Values</link>. To add or edit
30364 Circulation Messages you want to work with the <link linkend="bornotes">BOR_NOTES</link> value.</para>
30367 <screeninfo>BOR_NOTES Authorized Values</screeninfo>
30371 <imagedata fileref="images/circ/bor_notes.png"/>
30376 <para>The 'Description' field can hold a canned message that you would
30377 like to appear on the patron's record. <important>
30378 <para>The 'Description' field is limited to 80 characters, but the
30379 patron message field can hold more than that. Enter 80 characters
30380 in the 'Description' field and then type the rest on the patron
30382 </important></para>
30385 <section id="addcircmsg">
30386 <title><link linkend="addcircmsg">Adding a Message</link></title>
30388 <para>When on the patron's check out tab you will see a link to 'Add a
30389 new message' to the right of the check out box.</para>
30392 <screeninfo>Circulation Message in Staff Client</screeninfo>
30396 <imagedata fileref="images/circ/staffmessages.png"/>
30401 <para>When you click 'Add a new message' you will be asked to choose
30402 if the message is for the librarians or the patron and the message you
30403 would like to leave.</para>
30406 <screeninfo>Leave a Circulation Message</screeninfo>
30410 <imagedata fileref="images/circ/leavecircmsg.png"/>
30416 <para>A message for the patron will also show to the library
30421 <section id="viewcircmsg">
30422 <title><link linkend="viewcircmsg">Viewing Messages</link></title>
30424 <para>Circulation messages meant for the staff and/or the patron will
30425 appear on the patron's checkout screen to the right of the checkout
30426 box. Messages in bold and red are meant for the library staff only,
30427 whereas messages in regular italics font are meant for the patron and
30428 the librarian.</para>
30431 <screeninfo>Circulation Message in Staff Client</screeninfo>
30435 <imagedata fileref="images/circ/staffmessages.png"/>
30440 <para>Circulation messages meant for the patron will also appear when
30441 they log into the OPAC.</para>
30444 <screeninfo>Circulation Message in OPAC</screeninfo>
30448 <imagedata fileref="images/circ/opacmsg.png"/>
30455 <section id="holds">
30456 <title><link linkend="holds">Holds</link></title>
30458 <para>Koha allows patrons to put things on hold. A 'Hold' is a way to reserve an item.
30459 Depending on your <link linkend="circfinerules">circulation and fine rules</link> and <link linkend="circholdspolicy">hold preference</link> settings patrons will be able to place
30460 items on hold for pickup at the library at a later date/time.</para>
30462 <section id="holdsinstaff">
30463 <title><link linkend="holdsinstaff">Placing Holds in Staff Client</link></title>
30465 <para>There are several ways to place holds from the staff client. The
30466 most obvious is using the 'Place Hold' button at the top of any
30467 bibliographic record.</para>
30470 <screeninfo>Place Hold Button on Bib Record</screeninfo>
30474 <imagedata fileref="images/circ/placeholdbib.png"/>
30479 <para>You can also click the smaller 'Place Hold' link found at the
30480 top of your catalog search results, or the 'Holds' link found below
30481 each result.</para>
30484 <screeninfo>Hold options on search results</screeninfo>
30488 <imagedata fileref="images/circ/placeholdsearch.png"/>
30493 <para>You will be asked to search for a patron by barcode or any part
30494 of their name to start the hold process.</para>
30497 <screeninfo>Find Patron For Hold</screeninfo>
30501 <imagedata fileref="images/circ/placeholdfindpatron.png"/>
30506 <para>If you'd like to search for the patron first and then the bib
30507 record for the hold, you can open the patron record and click on the
30508 'Search to Hold' button at the top of the patron record.</para>
30511 <screeninfo>Search to Hold on Patron Record</screeninfo>
30515 <imagedata fileref="images/circ/searchtohold.png"/>
30520 <para>After clicking the button you will be brought to the catalog
30521 search page where you can find the book(s) you want to place a hold
30522 on. Under each title on the results you'll see an option to 'Hold for
30523 Patron Name.'</para>
30526 <screeninfo>Hold for Patron links on Search Results</screeninfo>
30530 <imagedata fileref="images/circ/holdresults.png"/>
30535 <para>If you want to place a hold on multiple items, simply check the
30536 boxes to the left of them and click the arrow to the right of the
30537 'Place Hold' button.</para>
30540 <screeninfo>Hold Multiple Items for Patron</screeninfo>
30544 <imagedata fileref="images/circ/holdmultiresults.png"/>
30549 <para>Depending on how many items you choose to place a hold on at
30550 once you will see a different place hold form. If you are placing a
30551 hold on one bibliographic record you will see a list of all of the
30552 items you can place a hold on.</para>
30555 <screeninfo>Place Hold Form</screeninfo>
30559 <imagedata fileref="images/circ/placeholdsingle.png"/>
30566 <para>Enter any notes that might apply to this hold</para>
30570 <para>Choose the library where the patron will pick up the
30574 <para>If you have the <link linkend="AllowHoldItemTypeSelection">AllowHoldItemTypeSelection</link> preference set to 'Allow' and the record had more
30575 than one item type attached you will see an option to choose to limit the hold to a
30576 specific item type<screenshot>
30577 <screeninfo>AllowHoldItemTypeSelection</screeninfo>
30580 <imagedata fileref="images/circ/AllowHoldItemTypeSelection.png"/>
30583 </screenshot></para>
30587 <para>If the patron wants the hold to start on a date other than
30588 today, enter that in the 'Hold starts on date' field</para>
30592 <para>This option will only appear if the <link linkend="AllowHoldDateInFuture">AllowHoldDateInFuture</link>
30593 system preference is set to 'Allow'</para>
30599 <para>If the patron has specified that they don't want the item
30600 after a certain date, or if you have limits on hold lengths, you
30601 can enter an expiration date for the hold in the 'Hold expires on
30606 <para>To have expired holds canceled automatically you will
30607 need to have the <link linkend="expiredholdscron">Expired
30608 Holds</link> cron job set to run on a regular basis.</para>
30614 <para>Next choose if you want to place a hold on the next
30615 available item or a specific item by clicking the radio button
30616 next to an individual item.</para>
30620 <para>If you're placing a hold on multiple items you will be presented
30621 with the next available option for all titles. If no items are
30622 available for hold it will say so on the confirmation screen.</para>
30625 <screeninfo>Place multiple items on hold</screeninfo>
30629 <imagedata fileref="images/circ/placeholdmultiple.png"/>
30634 <para>Once your hold is placed, if you'd like to have Koha forget that
30635 you used the 'Search to Hold' function, you can choose to have Koha
30636 'forget' the patron's name by clicking the arrow to the right of the
30637 'Place Hold' button on the search results and choosing the 'Forget'
30641 <screeninfo>Forget Search to Hold Option</screeninfo>
30645 <imagedata fileref="images/circ/forgethold.png"/>
30651 <section id="manageholds">
30652 <title><link linkend="manageholds">Managing Holds</link></title>
30654 <para>Holds can be altered and canceled from the Holds tab found on
30655 the left of the bibliographic record.</para>
30658 <screeninfo>Bibliographic Record Tabs</screeninfo>
30662 <imagedata fileref="images/circ/holdtab.png"/>
30667 <para>From the list of holds you can change the order of the holds,
30668 the pickup location, suspend and/or cancel the hold.</para>
30671 <screeninfo>Lists of Holds</screeninfo>
30675 <imagedata fileref="images/circ/holdslist.png"/>
30681 <para>If you have your <link linkend="AutoResumeSuspendedHolds">AutoResumeSuspendedHolds</link>
30682 preference set to "Don't allow" then you will not have the option to
30683 put an end date on the hold suspension</para>
30687 <para>Depending on how you have your <link linkend="HidePatronName">HidePatronName</link> system preference set
30688 the list may show card numbers instead of names in the Patron column
30689 like in the image above.</para>
30692 <para>To rearrange or delete holds, simply make a selection from the
30693 'Priority' pull down or click the arrows to the right of the priority
30697 <screeninfo>Hold Priority Menu</screeninfo>
30701 <imagedata fileref="images/circ/holdpriority.png"/>
30706 <para>If you use the priority pull down to rearrange or delete holds
30707 you will need to click the 'Update hold(s)' button to save your
30710 <para>Clicking the down arrow to the right of the hold will stick the
30711 hold at the bottom of the list even if more requests are made.</para>
30713 <para>For example, your library has home-bound patrons that are
30714 allowed to keep books out for months at a time. It would not be fair
30715 to other patrons if a home-bound patron were able to check out a brand
30716 new book and keep it for months. For this reason, the home-bound
30717 patron's hold request would stay at the bottom of the queue until
30718 everyone else who wanted to read that book has already done so.</para>
30721 <screeninfo>Lowest Priority & Delete Options for
30726 <imagedata fileref="images/circ/lowestpriority.png"/>
30731 <para>If a patron asks to have their hold suspended and you have the
30732 <link linkend="SuspendHoldsIntranet">SuspendHoldsIntranet</link>
30733 system preference set to 'allow' you can do so by clicking the Suspend
30734 button to far right. If the patron gives you a date for the items to
30735 become unsuspended you can enter that in the date box and click the
30736 'Update hold(s)' button to save your changes.</para>
30739 <screeninfo>Hold suspension column</screeninfo>
30743 <imagedata fileref="images/circ/suspendholds.png"/>
30748 <para>To delete or cancel a hold click the red 'X' to the right of the
30749 hold line. To delete/cancel a bunch of holds you can choose 'del' from
30750 pull down to the left of each line and then click 'Update hold(s)' at
30751 the bottom of the list.</para>
30754 <screeninfo>Cancel Holds</screeninfo>
30758 <imagedata fileref="images/circ/cancelholds.png"/>
30764 <section id="receiveholds">
30765 <title><link linkend="receiveholds">Receiving Holds</link></title>
30767 <para>When items that are on hold are <link linkend="checkingin">checked in</link> or <link linkend="checkingout">out</link> the system will remind the circulation librarian that
30768 the item is on hold and offer them options for managing the hold.</para>
30770 <para>When you check in an item that has a hold on it the system will
30771 ask you to either confirm and transfer the item</para>
30774 <screeninfo>Confirm Hold & Transfer</screeninfo>
30778 <imagedata fileref="images/circ/holdconfirmtransfer.png"/>
30783 <para>or just confirm the hold</para>
30786 <screeninfo>Confirm Hold</screeninfo>
30790 <imagedata fileref="images/circ/holdconfirm.png"/>
30795 <para>Clicking the Confirm button will mark the item as on hold for
30796 the patron. If the item needs to be transferred the item will also be
30797 marked as in transit to the proper branch. Clicking 'Ignore' will
30798 retain the hold, but allow you to check the item out to another
30799 patron. Choosing to confirm and print will present you with a
30800 printable page that you can slip inside the book with the necessary
30801 hold and/or transfer information.</para>
30803 <para>Once confirmed the hold will show on the patron record and on
30804 the checkout screen under the 'Hold' tab.</para>
30807 <screeninfo>Hold on Patron Record</screeninfo>
30811 <imagedata fileref="images/circ/holdpatronrec.png"/>
30815 <para>From here if the patron would like you suspend their holds you can do so one by one or
30818 <para>The item record will also show that the item is on hold.</para>
30821 <screeninfo>Hold on Item Record</screeninfo>
30825 <imagedata fileref="images/circ/holditem.png"/>
30830 <para>In some cases a patron may come in to pick up a hold for their
30831 partner (or someone else in their household). In this case you want to
30832 make sure that the hold is cancelled when you check the item out to
30833 someone else. When trying to check out an item that is already waiting
30834 for someone else you will be presented with a warning message.</para>
30837 <screeninfo>Hold waiting for someone else</screeninfo>
30841 <imagedata fileref="images/circ/holdwaitingwarn.png"/>
30846 <para>From here you can check the item out to the patron at the desk
30847 and cancel the hold for the patron.</para>
30851 <section id="transfers">
30852 <title><link linkend="transfers">Transfers</link></title>
30854 <para>If you work in a multi-branch system you can transfer items from one library to another
30855 by using the Transfer tool.<itemizedlist>
30857 <para><emphasis role="italic">Get there</emphasis>: Circulation > Transfer</para>
30859 </itemizedlist></para>
30860 <para>To transfer an item</para>
30864 <para>Click 'Transfer' on the Circulation page</para>
30867 <screeninfo>Transfer Tool</screeninfo>
30871 <imagedata fileref="images/circ/transfer.png"/>
30878 <para>Enter the library you would like to transfer the item
30883 <para>Scan or type the barcode on the item you would like to
30890 <para>Click 'Submit'</para>
30893 <screeninfo>Transfer Summary</screeninfo>
30897 <imagedata fileref="images/circ/itemtransferred.png"/>
30904 <para>The item will now say that it is in transit</para>
30907 <screeninfo>Item in Transit</screeninfo>
30911 <imagedata fileref="images/circ/itemintransit.png"/>
30918 <para>When the item arrives at the other branch the librarian must
30919 check the item in to acknowledge that it is no longer in
30924 <para>The item will not be permanently moved to the new
30928 <screeninfo>Item record</screeninfo>
30932 <imagedata fileref="images/circ/itemlocations.png"/>
30939 <para>The item shows the same 'Home Library' but has updated the
30940 'Current Location' to note where it resides at this time</para>
30947 <section id="setlibrary">
30948 <title><link linkend="setlibrary">Set Library</link></title>
30950 <para>By default you will enter the staff client as if you are at your
30951 home library. This library will appear in the top right of the Staff
30955 <screeninfo>My Library</screeninfo>
30959 <imagedata fileref="images/circ/mylibrary.png"/>
30964 <para>This is the library that all circulation transactions will take
30965 place at. If you are at another library (or on a bookmobile) you will
30966 want to set your library before you start circulating items. To do this
30967 you can click 'Set' at the top right or on the Circulation page.</para>
30970 <screeninfo>Set Library Form</screeninfo>
30974 <imagedata fileref="images/circ/setlibrary.png"/>
30979 <para>Once you have saved your changes you new library will appear in
30980 the top right.</para>
30983 <section id="fastaddcat">
30984 <title><link linkend="fastaddcat">Fast Add Cataloging</link></title>
30986 <para>Sometimes circulation librarians need to quickly add a record to
30987 the system for an item they are about to check out. This is called 'Fast
30988 Add.' To allow circulation librarians access to the Fast Add Cataloging
30989 tool, simply make sure they have the <link linkend="fastaddpermissions">fast_cataloging</link> permissions. There
30990 are two ways to add titles via fast add. If you know that you're about
30991 to check out an item that isn't in you catalog you can go to the
30992 Circulation module and click 'Fast cataloging.'</para>
30995 <screeninfo>Circulation Menu</screeninfo>
30999 <imagedata fileref="images/circ/circmenu.png"/>
31004 <para>The cataloging interface will open up with the short cataloging
31008 <screeninfo>Fast Add Framework</screeninfo>
31012 <imagedata fileref="images/circ/fastadd.png"/>
31017 <para>After adding your cataloging data you will be asked to enter item
31018 data. Enter the items barcode, collection code, etc and save the item
31019 before checking it out.</para>
31021 <para>The other way to fast catalog is from the checkout screen. When
31022 you enter a barcode at checkout that Koha can't find, it will prompt you
31023 to use fast cataloging to add the item to Koha and check it out.</para>
31026 <screeninfo>Barcode not found</screeninfo>
31030 <imagedata fileref="images/circ/barcodefastadd.png"/>
31035 <para>Clicking 'Fast cataloging' will bring you to the fast cataloging
31036 form where you can enter the title information</para>
31039 <screeninfo>Fast cataloging</screeninfo>
31043 <imagedata fileref="images/circ/fastaddbarcode.png"/>
31048 <para>After clicking 'Save' you will be brought to the item record where
31049 the barcode will already be filled in with the barcode you're trying to
31053 <screeninfo>Fast cataloging item record</screeninfo>
31057 <imagedata fileref="images/circ/fastadditem.png"/>
31062 <para>After clicking the 'Add item' button the item will automatically
31063 be checked out the patron you were trying to check the book out to
31067 <screeninfo>Checked out item</screeninfo>
31071 <imagedata fileref="images/circ/fastaddcheckedout.png"/>
31077 <section id="circreports">
31078 <title><link linkend="circreports">Circulation Reports</link></title>
31080 <para>Most reports can be found via the Reports module, but some of the more common
31081 circulation reports are available right from the Circulation module.<itemizedlist>
31083 <para><emphasis role="italic">Get there</emphasis>: Circulation > Circulation
31086 </itemizedlist></para>
31088 <section id="holdsqueue">
31089 <title><link linkend="holdsqueue">Holds Queue</link></title>
31091 <para>This report will show you all of the holds at your
31095 <screeninfo>Sample Holds Queue</screeninfo>
31099 <imagedata fileref="images/circ/holdsqueue.png"/>
31104 <para>To generate this report, you must have the <link linkend="buildholdscron">Build Holds Queue cron job</link> running.
31105 This cron job is a script that should be run periodically if your
31106 library system allows borrowers to place on-shelf holds. This script
31107 decides which library should be responsible for fulfilling a given
31108 hold request.</para>
31110 <para>It's behavior is controlled by the system preferences <link linkend="holdqueueweight">StaticHoldsQueueWeight</link> and <link linkend="holdqueueweight">RandomizeHoldsQueueWeight</link>.</para>
31112 <para>If you do not want all of your libraries to participate in the on-shelf holds
31113 fulfillment process, you should list the libraries that *do* participate in the process
31114 here by inputting all the participating library's branchcodes, separated by commas ( e.g.
31115 "MPL,CPL,SPL,BML" etc. ).</para>
31117 <para>By default, the holds queue will be generated such that the
31118 system will first attempt to hold fulfillment using items already at
31119 the pickup library if possible. If there are no items available at the
31120 pickup library to fill a hold, build_holds_queue.pl will then use the
31121 list of libraries defined in StaticHoldsQueueWeight. If
31122 RandomizeHoldsQueueWeight is disabled ( which it is by default ), the
31123 script will assign fulfillment requests in the order the branches are
31124 placed in the StaticHoldsQueueWeight system preference.</para>
31126 <para>For example, if your system has three libraries, of varying
31127 sizes ( small, medium and large ) and you want the burden of holds
31128 fulfillment to be on larger libraries before smaller libraries, you
31129 would want StaticHoldsQueueWeight to look something like
31130 "LRG,MED,SML".</para>
31132 <para>If you want the burden of holds fulfillment to be spread out
31133 equally throughout your library system, simply enable
31134 RandomizeHoldsQueueWeight. When this system preference is enabled, the
31135 order in which libraries will be requested to fulfill an on-shelf hold
31136 will be randomized each time the list is regenerated.</para>
31138 <para>Leaving StaticHoldsQueueWeight empty is contraindicated at this
31139 time. Doing so will cause the build_holds_queue script to ignore
31140 RandomizeHoldsQueueWeight, causing the script to request hold
31141 fulfillment not randomly, but by alphabetical order.</para>
31144 <section id="holdspull">
31145 <title><link linkend="holdspull">Holds to pull</link></title>
31147 <para>This report will show you all of the items that have holds on
31148 them that are available at the library for pulling. If the items are
31149 available at multiple branches then all branches with that item
31150 available will see the hold to pull until one library triggers the
31154 <screeninfo>Holds to Pull</screeninfo>
31158 <imagedata fileref="images/circ/holdstopull.png"/>
31163 <para>You can limit the results you see by using the Refine box on the
31164 left side of the page:</para>
31167 <screeninfo>Refine Holds to Pull Report</screeninfo>
31171 <imagedata fileref="images/circ/refineholdstopull.png"/>
31177 <section id="holdspickup">
31178 <title><link linkend="holdspickup">Holds awaiting pickup</link></title>
31180 <para>This report will show all of the holds that are waiting for
31181 patrons to pick them up.</para>
31184 <screeninfo>Holds Awaiting Pickup</screeninfo>
31188 <imagedata fileref="images/circ/holdspickup.png"/>
31193 <para>Items that have been on the hold shelf longer than you normally
31194 allow (based on the <link linkend="ReservesMaxPickUpDelay">ReservesMaxPickUpDelay</link>
31195 preference value) will appear on the 'Holds Over' tab, they will not
31196 automatically be cancelled unless you have set the <link linkend="expiredholdscron">cron job</link> to do that for you, but you
31197 can cancel all holds using the button at the top of the list.</para>
31200 <screeninfo>Items waiting on the hold shelf too long</screeninfo>
31204 <imagedata fileref="images/circ/holdspickupover.png"/>
31210 <section id="holdratios">
31211 <title><link linkend="holdratios">Hold ratios</link></title>
31213 <para>Hold ratios help with collection development. Using this report
31214 you will be able to see how many of your patrons have holds on items
31215 and whether you should buy more. By default it will be set to the
31216 library needing 3 items per hold that has been placed. The report will
31217 tell you how many additional items need to be purchased to meet this
31221 <screeninfo>Hold Ratios</screeninfo>
31225 <imagedata fileref="images/circ/holdratio.png"/>
31231 <section id="transferstoreceive">
31232 <title><link linkend="transferstoreceive">Transfers to receive</link></title>
31234 <para>This report will list all of the items that Koha thinks are in
31235 transit to your library.</para>
31238 <screeninfo>Transfers to Receive</screeninfo>
31242 <imagedata fileref="images/circ/transitreceive.png"/>
31247 <para>If your transfers are late in arriving at your library you will
31248 see a message stating how late your items are.</para>
31251 <screeninfo>Late transfers include warning messages</screeninfo>
31255 <imagedata fileref="images/circ/transferlate.png"/>
31261 <para>An item is considered late based on the number of days you
31262 have entered in the <link linkend="TransfersMaxDaysWarning">TransfersMaxDaysWarning</link>
31263 system preference.</para>
31267 <section id="overduesreport">
31268 <title><link linkend="overduesreport">Overdues</link></title>
31271 <para>For libraries with a large patron base, this report may take a
31272 significant amount of time to run.</para>
31276 <para>Large libraries can choose to filter the report before it runs
31277 by setting the <link linkend="FilterBeforeOverdueReport">FilterBeforeOverdueReport</link>
31278 system preference to 'Require'.</para>
31281 <para>This report will list all items that are overdue at your
31285 <screeninfo>Overdues List</screeninfo>
31289 <imagedata fileref="images/circ/overdues.png"/>
31294 <para>The report can be filtered using the menu options found on the left of the report.<note>
31295 <para>The 'Show any items currently checked out' checkbox basically switches this from a
31296 report of overdues to a report of checkouts. It will show all titles checked out
31297 regardless of due date.</para>
31301 <section id="overduesfines">
31302 <title><link linkend="overduesfines">Overdues with fines</link></title>
31304 <para>This report will show you any overdues at your library that have
31305 accrued fines on them.</para>
31308 <screeninfo>Overdues with fines</screeninfo>
31312 <imagedata fileref="images/circ/overduewfines.png"/>
31317 <para>If you would like to limit the report you can use the pull down
31318 menu at the top to limit to a specific shelving location at your
31319 branch. To see overdues with fines at other branches you will have to
31320 <link linkend="setlibrary">change your branch</link> or log in at that
31322 <para>If you do not charge fines and/or don't have the <link linkend="finescronjob">fines cron job</link> running you will see
31323 no data on this report.</para>
31324 </important></para>
31326 <section id="pendingonsite">
31327 <title><link linkend="pendingonsite">Pending on-site checkouts</link></title>
31328 <para>If you are using the on site checkouts functionality (<link linkend="OnSiteCheckouts">OnSiteCheckouts</link>) then you'll have a report to view all items that are currently
31329 checked out on site.<screenshot>
31330 <screeninfo>Pending onsite checkouts</screeninfo>
31333 <imagedata fileref="images/circ/pendingonsite.png"/>
31336 </screenshot></para>
31337 <para>This will list the due date (overdues in red), who has the item, item information and
31338 what library the item is at.</para>
31342 <section id="trackinhouse">
31343 <title><link linkend="trackinhouse">Tracking In house Use</link></title>
31345 <para>Many libraries track the use of items within the library. <note>
31346 <para>This is different from tracking on site usage. In house use is the use of items in
31347 the library by patrons without them having to check them out. On site use is the use of
31348 items on site that must first be checked out. To learn more about on site usage please
31349 review the <link linkend="OnSiteCheckouts">OnSiteCheckouts</link> preference.</para>
31351 <para>Tracking the use of items in the library without checking them out can be done in Koha
31352 one of two ways. The first is to create one or more <link linkend="addstatspatron">Statistical Patrons</link>. When collecting items that have been used within the library,
31353 you will want to check them out to your statistical patron:</para>
31356 <screeninfo>Check Out Items to Stats Patron</screeninfo>
31360 <imagedata fileref="images/circ/checkoutinhouse.png"/>
31365 <para>Instead of marking the item as 'checked out' the system will
31366 record that the item was used in house:</para>
31369 <screeninfo>Local Use Recorded</screeninfo>
31373 <imagedata fileref="images/circ/localuserecorded.png"/>
31378 <para>Repeat these steps for all items that have been used within the
31379 library to keep accurate statistics for item use.</para>
31381 <para>The other way to record local use of items is to set your <link linkend="RecordLocalUseOnReturn">RecordLocalUseOnReturn</link>
31382 preference to 'Record.' Then whenever you check an item in that is not
31383 checked out and not on hold a local use will be recorded.</para>
31386 <screeninfo>Local Use Recorded</screeninfo>
31390 <imagedata fileref="images/circ/localusecheckin.png"/>
31396 <para>If you have <link linkend="RecordLocalUseOnReturn">RecordLocalUseOnReturn</link> set to
31397 'Record' you can still use your statistical patrons to record local
31398 use as well.</para>
31402 <section id="processinglocations">
31403 <title><link linkend="processinglocations">In Processing / Book Cart Locations</link></title>
31405 <para>Koha allows for handling temporary locations like the processing
31406 center and/or book carts throughout the library. For this feature to
31407 work you must first make sure you have <link linkend="authorizedvalues">authorized values</link> set in the <link linkend="shelvelocvals">LOC</link> category for PROC (Processing Center)
31408 and CART (Book Cart).</para>
31411 <screeninfo>CART & PROC values in LOC</screeninfo>
31415 <imagedata fileref="images/circ/LOCvalues.png"/>
31420 <para>Next you need to set the <link linkend="NewItemsDefaultLocation">NewItemsDefaultLocation</link> system
31421 preference to PROC. This will set the new items to the Processing Center
31422 as their default location.</para>
31424 <para>When creating items you enter in their desired final shelving location and Koha will
31425 temporarily change that to PROC. If <link linkend="InProcessingToShelvingCart">InProcessingToShelvingCart</link> is set to "Don't move" then when an item with a
31426 location of PROC is checked in it will either automatically update the item to use the
31427 permanent location. If <link linkend="InProcessingToShelvingCart">InProcessingToShelvingCart</link> is set to "Move" then when an item is checked in the
31428 location is changed from PROC to CART.</para>
31430 <para>A <link linkend="proccartcron">cron job</link> is then set to run at specified
31431 intervals to age items from CART to the permanent shelving location. (For example, an hourly
31432 cron entry of cart_to_shelf.pl --hours 3 where --hours is the amount of time an item should
31433 spend on the cart before aging to its permanent location.)</para>
31437 <para>If the <link linkend="ReturnToShelvingCart">ReturnToShelvingCart</link>
31438 system preference is set to "Move", any newly checked-in item is also automatically
31439 put into the shelving cart, to be covered by the same script run.</para>
31444 <para>Checkins with confirmed holds will not go into the shelving cart. If items
31445 on the shelving cart are checked out, the cart location will be
31452 <section id="selfcheckout">
31453 <title><link linkend="selfcheckout">Self Checkout</link></title>
31455 <para>Koha comes with a very basic self checkout module. To enable this
31456 module you need to set the <link linkend="WebBasedSelfCheck">WebBasedSelfCheck</link> preference to
31457 'Enable.' To use this module you have to log in as a <link linkend="addstaffpatron">staff member</link> with <link linkend="patronpermissions">circulation permissions</link>.</para>
31460 <para>Create a <link linkend="addstaffpatron">staff patron</link>
31461 specifically for this action so that you don't leave a real staff
31462 client logged into a computer all day</para>
31465 <para>There is no link to the Self Checkout module, but a simple addition to the <link linkend="intranetuserjs">IntranetUserJS</link> system preference can add one.</para>
31467 <programlisting>$(document).ready(function(){ $("#login
31468 #submit").parent().after("<p><a
31469 href=\"http://YOUR_KOHA_OPAC_URL/cgi-bin/koha/sco/sco-main.pl\"
31470 target=\"_blank\">Self-Checkout</a></p>"); }); </programlisting>
31473 <para>The code above has line breaks added to make it more readable,
31474 please be sure to enter the above as one line in when putting it in
31475 the system preference.</para>
31478 <para>The link will then appear at the bottom of the log in page:</para>
31481 <screeninfo>Self Checkout Link on Staff Login</screeninfo>
31485 <imagedata fileref="images/circ/selfcheckoutlink.png"/>
31490 <para>You can also access this module by going to :
31491 http://YOUR_KOHA_OPAC_URL/cgi-bin/koha/sco/sco-main.pl</para>
31493 <para>When on the self checkout page depending on your value in the
31494 <link linkend="SelfCheckoutByLogin">SelfCheckoutByLogin</link>
31495 preference you will be asked to enter you cardnumber</para>
31498 <screeninfo>Self Checkout Patron Card Number</screeninfo>
31502 <imagedata fileref="images/circ/selfcheckout.png"/>
31507 <para>or your username and password:</para>
31510 <screeninfo>Shelf checkout by login</screeninfo>
31514 <imagedata fileref="images/circ/SelfCheckoutByLogin.png"/>
31519 <para>Once you're logged in to the self check module you will be asked
31520 to scan the items you are checking out</para>
31523 <screeninfo>Self Checkout</screeninfo>
31527 <imagedata fileref="images/circ/selfcheckoutuser.png"/>
31532 <para>As you scan items they will appear below the barcode box</para>
31535 <screeninfo>Self Checkout Summary</screeninfo>
31539 <imagedata fileref="images/circ/selfcheckoutsummary.png"/>
31544 <para>When you are finished scanning items it is important to click the 'Finish' button. This
31545 will prompt you to print a receipt and log you out of the self check module.</para>
31547 <screeninfo>Self Checkout Receipt</screeninfo>
31550 <imagedata fileref="images/circ/selfreceiptprint.png"/>
31555 <para>When attempting to check items out there are some instances where
31556 error messages will appear and the patron will be directed to the
31557 librarian. This will happen even if you are allowing overrides on
31558 circulation functions. Only a librarian can override a circulation block
31559 and so patrons must go to the librarian for help in these
31563 <screeninfo>Self Checkout Error Message</screeninfo>
31567 <imagedata fileref="images/circ/selfcheckoutfines.png"/>
31573 <section id="offlinecirc">
31574 <title><link linkend="offlinecirc">Offline Circulation Utilities</link></title>
31575 <para>Koha allows for you to continue circulation actions while offline by using any one of
31576 three utilities.</para>
31577 <section id="kohaofflinecirc">
31578 <title><link linkend="kohaofflinecirc">Offline Circulation in Koha</link></title>
31579 <para>If the <link linkend="AllowOfflineCirculation">AllowOfflineCirculation</link>
31580 preference is set to 'Enable' the library staff can continue to perform circulation
31581 actions within Koha when the system is offline. You will want to visit
31582 http://your-koha-staff-client-url/cgi-bin/koha/circ/offline.pl at least once while online
31583 and bookmark that page. That is the page you will go to when you are offline.</para>
31585 <para>The offline interface uses HTML LocalStorage, which depending on the browser and
31586 user setting, is limited to 2.5MB or 5MB per domain. This means that larger systems will
31587 not be able to synchronize their data and are recommended to use either the <link linkend="firefoxofflinecirc">Firefox</link> or <link linkend="windowsofflinecirc">Windows</link> application for offline circulation.</para>
31589 <section id="kohaofflinesetup">
31590 <title id="offlinesetup"><link linkend="kohaofflinesetup">Setup</link></title>
31591 <para>Before the first time the system goes offline go to Circulation and choose 'Built-in
31592 offline circulation interface'</para>
31594 <screeninfo>Built-in offline circulation interface</screeninfo>
31597 <imagedata fileref="images/circ/offlinecirc.png"/>
31601 <para>And synchronize your data on every circulation computer by clicking the
31602 'Synchronize' link on the right of the screen.</para>
31604 <screeninfo>Synchronize data</screeninfo>
31607 <imagedata fileref="images/circ/syncoffline.png"/>
31612 <para>The offline interface uses HTML LocalStorage, which depending on the browser and
31613 user setting, is limited to 2.5MB or 5MB per domain. This means that larger systems
31614 will not be able to synchronize their data and are recommended to use either the <link linkend="firefoxofflinecirc">Firefox</link> or <link linkend="windowsofflinecirc">Windows</link> application for offline circulation.</para>
31616 <para>This will allow you download a local copy of your patrons and circulation data.
31617 Click the 'Download records' link at the top of the page to synchronize your data.</para>
31619 <screeninfo>Download records for offline use</screeninfo>
31622 <imagedata fileref="images/circ/downloadoffline.png"/>
31626 <para>Once your data is downloaded you will see the dates your data was last synced to the
31627 right of each data set.<screenshot>
31628 <screeninfo>Synced offline data</screeninfo>
31631 <imagedata fileref="images/circ/syncedoffline.png"/>
31634 </screenshot>This should be done regularly in preparation for any unexpected connection
31637 <section id="kohaofflinecirculating">
31638 <title id="offlinecirculating"><link linkend="kohaofflinecirculating">Circulating</link></title>
31639 <para>When your system goes offline visit the Offline Circulation page
31640 (http://your-koha-staff-client-url/cgi-bin/koha/circ/offline.pl) in Koha and click
31641 'Check out' or 'Check in' to perform offline actions.</para>
31642 <para>Checking out is done by searching for the patron by barcode or name at the top of
31643 the 'Check out' screen. After selecting a patron you will be presented with the synced
31644 patron info, including fines and check outs.</para>
31646 <screeninfo>Check out offline</screeninfo>
31649 <imagedata fileref="images/circ/offlinecheckout.png"/>
31653 <para>Scan the barcode of the item you would like to check out and enter a due date. If
31654 you don't enter a due date Koha will prompt you for one.</para>
31656 <screeninfo>Offline due date</screeninfo>
31659 <imagedata fileref="images/circ/offlineduedate.png"/>
31663 <para>Once the item is checked out it will appear below the patron's info.</para>
31665 <screeninfo>Offline checkouts</screeninfo>
31668 <imagedata fileref="images/circ/offlinecheckouts.png"/>
31674 <section id="kohaofflineupload">
31675 <title><link linkend="kohaofflineupload">Koha Offline Uploading</link></title>
31676 <para>Once the system is back online visit the Synchronize page on the Offline Circulation
31677 module and click 'Upload transactions'</para>
31679 <screeninfo>Upload transactions</screeninfo>
31682 <imagedata fileref="images/circ/offlineupload.png"/>
31686 <para>After the files are uploaded you can click 'View pending offline circulation
31687 actions' on the right.</para>
31689 <screeninfo>View pending offline circulation actions</screeninfo>
31692 <imagedata fileref="images/circ/viewkohaoffline.png"/>
31696 <para>After clicking 'View pending offline circulation actions' you will be brought to a
31697 summary of all of the actions you loaded in to Koha in your *.koc file.</para>
31699 <screeninfo>Offline Circulation</screeninfo>
31702 <imagedata fileref="images/circ/offlinecirclog.png"/>
31708 <para>Once all of the logs from all of the circulation computers are loaded you will
31709 be able to check them all or select just those you want to process into Koha.</para>
31712 <para>Click on the Process button and Koha will record every stored transaction one by
31713 one. For each transaction, the status will change to:<itemizedlist>
31715 <para>"Success." if the transaction was processed correctly</para>
31718 <para>"Borrower not found." if the borrower card number is incorrect</para>
31721 <para>"Item not found." if the item barcode is wrong</para>
31724 <para>"Item not issued." if you checked in an available item</para>
31726 </itemizedlist></para>
31729 <para>Once finished you will have a summary of all of your transactions</para>
31731 <screeninfo>Offline Circulation Summary</screeninfo>
31734 <imagedata fileref="images/circ/offlinecircsuccess.png"/>
31741 <section id="firefoxofflinecirc">
31745 <firstname>Franois</firstname>
31746 <surname>Charbonnier</surname>
31748 <orgname>BibLibre</orgname>
31753 <firstname>Nicole C.</firstname>
31754 <surname>Engard</surname>
31755 <contrib>Changed/edited content where necessary.</contrib>
31759 <pubdate>2012</pubdate>
31761 <title><link linkend="firefoxofflinecirc">Firefox Plugin</link></title>
31763 <para>There is an offline circulation tool that you can add to your Firefox browser as an
31764 addon. To do so, just go to <ulink url="https://addons.mozilla.org/en/firefox/addon/koct/">https://addons.mozilla.org/en/firefox/addon/koct/</ulink> page and click on the
31765 "install now" button. You may have to confirm the installation, just click on "install
31766 now" and then restart Firefox to complete the installation.</para>
31768 <para>Once you have installed the plugins and restarted Firefox, you will see the Koha logo
31769 in the download bar at the bottom right of Firefox.</para>
31772 <screeninfo>Koha Icon on Add-on Bar</screeninfo>
31776 <imagedata fileref="images/circ/koctstatusbar.png"/>
31781 <para>A click on the logo will open the tool in its own window.</para>
31784 <screeninfo>Koha Offline Circ Tool</screeninfo>
31788 <imagedata fileref="images/circ/koct.png"/>
31793 <para>The plugin consists of four tabs:</para>
31797 <para>The Check Out tab is where you check out items</para>
31801 <para>The Check In tab is where you check in items</para>
31805 <para>The Log tab keeps track of every transaction done while in
31806 offline mode</para>
31810 <para>The log will keep information until you empty it. Each
31811 time you open the plugin and it contains data in the log it
31812 will warn you</para>
31815 <screeninfo>Koha Offline Circ Warning</screeninfo>
31819 <imagedata fileref="images/circ/koctwarn.png"/>
31824 <para>If you'd like to clear the log, check the 'I want to
31825 delete rows' box before hitting the 'OK' button. Otherwise
31826 clicking 'OK' will keep the items in the log and let you
31827 continue working with the tool.</para>
31833 <para>The Param tab is to set up the plugin</para>
31837 <para>The first thing you want to do then is to set up the plugin. Go
31838 to the Param tab to set up the plugin</para>
31841 <screeninfo>Koha Offline CIrc Params</screeninfo>
31845 <imagedata fileref="images/circ/koctparam.png"/>
31850 <para>Answer the 4 questions presented:</para>
31854 <para>Server = the URL of the librarian interface</para>
31858 <para>Branch Code = the code for the branch where you are
31863 <para>Username = your staff account login</para>
31867 <para>Password = your staff account password</para>
31872 <para>To save the settings, you will have to close the plugin
31873 window and re-open it by clicking again on the Koha logo in the
31876 <para>You can create a staff account dedicated to the offline
31877 circulation. So that, no matter who is at the circulation desk,
31878 they can all use the same login. Along those lines, you can use a
31879 group login that you already have in place for circulation as
31881 </note>Once you have everything set up you can start checking items
31884 <para>Checking out:</para>
31887 <screeninfo>Koha Offline Circulation Check Out</screeninfo>
31891 <imagedata fileref="images/circ/koct.png"/>
31898 <para>Go to the Check Out tab</para>
31902 <para>Scan the patron barcode</para>
31906 <para>Scan the item barcode</para>
31910 <para>Click 'Save'</para>
31914 <para>Checking in:</para>
31917 <screeninfo>Koha Offline Circulation Check In</screeninfo>
31921 <imagedata fileref="images/circ/koctcheckin.png"/>
31928 <para>Go to the Check In tab</para>
31932 <para>Scan the item barcode</para>
31936 <para>Click Save</para>
31940 <para>Each time, you check out or check in an item, a new transaction
31941 is recorded in the local plugin database and you will see, at the
31942 bottom of the plugin how many transactions has been made during the
31943 offline circulation. For example, "10 Row(s) Added" means you did 10
31944 transactions.</para>
31947 <screeninfo>Koha Offline Circulation Tool Count</screeninfo>
31951 <imagedata fileref="images/circ/koctcount.png"/>
31956 <para>Then, if you want an overview of every transaction, go to the
31957 Log tab. This tab will show you the transactions in the plugin
31961 <screeninfo>Koha Offline Circulation Log</screeninfo>
31965 <imagedata fileref="images/circ/koctlog.png"/>
31971 <para>The status will be "Local." as long as you are offline and
31972 don't process the transactions into Koha.</para>
31973 </note>When your Internet connection comes back up you will want to
31974 get these transactions in to Koha. Before processing these
31975 transactions you should be aware of a few issues.</para>
31977 <para>Because you are not connected to your Koha database when using
31978 this plugin holds will need additional processing. If an item you
31979 check in while offline has a hold, the hold is kept on the item.
31980 Since, you can't confirm holds found during the processing of every
31981 check in, the holds stay on the item and will need to be managed
31982 later. If you only checked in a few items you can just keep a record
31983 of them all. If you checked in a lot of items you can use the Holds
31984 Queue once it rebuilds to see what holds made it to the shelf
31985 erroneously.</para>
31987 <para>Similarly, if an patron card was expired, the offline
31988 circulation tool won't know about it, so the checkout will be recorded
31989 regardless of the patron's account being blocked normally.</para>
31991 <para>You have two options for adding this data to Koha</para>
31995 <para>Commit to Koha</para>
31999 <para>If you checked in/out on more than one computer at the
32000 same time, what you want is to process every transaction
32001 consistently. Let's say for instance that one patron checked a
32002 book out on one computer and then checked the same book in on
32003 another computer. To be consistent, you need to record the
32004 check out first and then the check in. Not the opposite! To do
32005 so, you need to group every transaction in one place, sort
32006 them all and then, process everything. So, you need to use the
32007 "Commit to Koha" option from every plugin/computer you worked
32008 with. This way, the log will go to Koha and be accessible from
32009 the Offline Circulation page.</para>
32012 <screeninfo>Circulation Menu</screeninfo>
32016 <imagedata fileref="images/circ/offlinecirclink.png"/>
32023 <para><emphasis>Get there:</emphasis> Circulation > Pending offline circulation
32027 <screeninfo>Offline Circulation</screeninfo>
32031 <imagedata fileref="images/circ/offlinecirclog.png"/>
32038 <para>Once all of the logs from all of the circulation
32039 computers are loaded you will be able to check them all or
32040 select just those you want to process into Koha.</para>
32044 <para>Click on the Process button and Koha will record every stored transaction one
32045 by one. For each transaction, the status will change to:</para>
32049 <para>"Success." if the transaction was processed
32054 <para>"Borrower not found." if the borrower card number is
32059 <para>"Item not found." if the item barcode is
32064 <para>"Item not issued." if you checked in an available
32071 <para>Once finished you will have a summary of all of your
32072 transactions</para>
32075 <screeninfo>Offline Circulation Summary</screeninfo>
32079 <imagedata fileref="images/circ/offlinecircsuccess.png"/>
32088 <para>Apply directly</para>
32092 <para>If you performed all of the circulation actions on one
32093 computer then everything is sorted already so you can choose
32094 to "Apply directly"</para>
32098 <para>The status column will be updated to let you know if the
32099 transactions were applied</para>
32103 <para>"Success." if the transaction was processed
32108 <para>"Borrower not found." if the borrower card number is
32113 <para>"Item not found." if the item barcode is
32118 <para>"Item not issued." if you checked in an available
32125 <para>Once you're finished you can review all of the items
32126 right in the Log tab</para>
32129 <screeninfo>Koha Offline Circulation Apply
32130 Directly</screeninfo>
32134 <imagedata fileref="images/circ/koctdirectly.png"/>
32143 <para>Once you are done you can clear the log by clicking Clear. If
32144 you don't you will be warned the next time you open the Offline
32145 Circulation tool.</para>
32148 <screeninfo>Koha Offline Circulation Tool Warning</screeninfo>
32152 <imagedata fileref="images/circ/koctwarn.png"/>
32158 <section id="windowsofflinecirc">
32159 <title><link linkend="windowsofflinecirc">Offline Circ Tool for Windows</link></title>
32161 <para>The Offline Circulation Utility can be downloaded at: <ulink url="https://github.com/bywatersolutions/koha-offline-circulation/releases">https://github.com/bywatersolutions/koha-offline-circulation/releases</ulink></para>
32162 <para>To generate a borrowers.db file for loading in to the Windows tool you will need to
32163 run the <link linkend="offlinecirccron">file generator via a cron job</link>.</para>
32164 <section id="uploadofflinecirc">
32165 <title><link linkend="uploadofflinecirc">Upload Offline Circ File</link></title>
32166 <para>The <link linkend="windowsofflinecirc">offline circulation tool for Windows</link>
32167 will generate a KOC file that you can upload into Koha once your system comes back
32169 <para>On the Circulation menu click 'Upload offline circulation file (.koc)'</para>
32171 <screeninfo>Circulation menu</screeninfo>
32174 <imagedata fileref="images/circ/offlinecirclink.png"/>
32178 <para>Browse your computer for the *.koc file</para>
32180 <screeninfo>Upload KOC File</screeninfo>
32183 <imagedata fileref="images/circ/uploadofflinecirc.png"/>
32187 <para>Once the file is uploaded, click the process the file</para>
32189 <screeninfo>Process offline circulation file</screeninfo>
32192 <imagedata fileref="images/circ/processoffline.png"/>
32196 <para>When this is complete you'll be able to upload another file or tend to pending
32197 offline circulation actions.</para>
32199 <screeninfo>Summary of offline actions</screeninfo>
32202 <imagedata fileref="images/circ/offlinesummary.png"/>
32206 <para>After clicking 'View pending offline circulation actions' you will be brought to a
32207 summary of all of the actions you loaded in to Koha in your *.koc file.</para>
32209 <screeninfo>Offline Circulation</screeninfo>
32212 <imagedata fileref="images/circ/offlinecirclog.png"/>
32218 <para>Once all of the logs from all of the circulation computers are loaded you will
32219 be able to check them all or select just those you want to process into Koha.</para>
32222 <para>Click on the Process button and Koha will record every stored transaction one by
32223 one. For each transaction, the status will change to:<itemizedlist>
32225 <para>"Success." if the transaction was processed correctly</para>
32228 <para>"Borrower not found." if the borrower card number is incorrect</para>
32231 <para>"Item not found." if the item barcode is wrong</para>
32234 <para>"Item not issued." if you checked in an available item</para>
32236 </itemizedlist></para>
32239 <para>Once finished you will have a summary of all of your transactions</para>
32241 <screeninfo>Offline Circulation Summary</screeninfo>
32244 <imagedata fileref="images/circ/offlinecircsuccess.png"/>
32253 <chapter id="cataloging">
32254 <title>Cataloging</title>
32256 <para>Before you start cataloging in Koha you're going to want to do some
32257 basic setup. Refer to the <link linkend="implementation">Implementation
32258 Checklist</link> for a full list of these things. Most importantly you're
32259 going to want to make sure that your <link linkend="marcbibframeworks">Frameworks</link> are all defined the way you
32260 want. Once in the cataloging module you will not be able to add or remove
32261 fields and subfields so your frameworks must be ready before you start
32263 <para>You can also use OCLC Connexion to send records directly in to Koha. For more information
32264 on that please review the <link linkend="oclcappendix">OCLC Connexion Setup
32265 appendix</link>.</para>
32269 <para><emphasis>Get there:</emphasis> More > Cataloging</para>
32273 <section id="catbibs">
32274 <title><link linkend="catbibs">Bibliographic Records</link></title>
32276 <para>In Koha the bibliographic record contains the main information
32277 related to the material. This includes things like the title, author,
32278 ISBN, etc. This information is stored in Koha in Marc (different flavors
32279 of Marc are supported in Koha). Once this information is saved, <link linkend="catitems">items or holdings</link> can be attached.</para>
32281 <section id="addbibrec">
32282 <title><link linkend="addbibrec">Adding Records</link></title>
32284 <para>Records can be added to Koha via original or copy cataloging. You can also choose to
32285 use the basic or advanced cataloging interface for all of your work. </para>
32286 <para>If you would like to catalog a record using a blank template in the basic
32291 <para>Click 'New Record'</para>
32294 <screeninfo>New Record Menu</screeninfo>
32298 <imagedata fileref="images/cataloging/newfromframework.png"/>
32305 <para>Choose the framework you would like to base your record
32311 <para>If you would like to catalog a record using a blank template in the advanced editor<itemizedlist>
32313 <para>Enable the <link linkend="EnableAdvancedCatalogingEditor">EnableAdvancedCatalogingEditor</link> preference</para>
32316 <para>Click the 'Advanced editor' button<screenshot>
32317 <screeninfo>Advanced editor button</screeninfo>
32320 <imagedata fileref="images/cataloging/advanceditorbtn.png"/>
32323 </screenshot></para>
32325 </itemizedlist></para>
32327 <para>If you want to catalog a record based on an existing record at another library in the
32328 editor you last used (basic or advanced)</para>
32332 <para>Click 'New from Z39.50/SRU'</para>
32335 <screeninfo>Z39.50 Search</screeninfo>
32339 <imagedata fileref="images/cataloging/zsearch.png"/>
32346 <para>Search for the item you would like to catalog</para>
32351 <para>If no results are found, try searching for fewer
32352 fields, not all Z39.50 targets can search all of the
32353 fields above.</para>
32360 <para>Search targets can be altered by using the <link linkend="z3950admin">Z39.50 Admin</link> area.</para>
32364 <para>From the results you can view the MARC or Card view for
32365 the records or choose to Import them into Koha</para>
32368 <screeninfo>Z39.50 Search Results</screeninfo>
32372 <imagedata fileref="images/cataloging/zsearchresults.png"/>
32379 <para>In addition to the Import link to the right of each
32380 title, you can click on the title you're interested in and
32381 a menu will pop up with links to preview the record and
32385 <screeninfo>Import Link Popup on Z39.50 Search
32386 Results</screeninfo>
32390 <imagedata fileref="images/cataloging/importz39.png"/>
32397 <para>If you don't find the title you need in your Z39.50
32398 search results you can click the 'Try Another Search'
32399 button at the bottom left of your results</para>
32402 <screeninfo>Try another search</screeninfo>
32406 <imagedata fileref="images/cataloging/tryanotherzsearch.png"/>
32416 <section id="basicatalog">
32417 <title><link linkend="basicatalog">Basic Editor Cataloging</link></title>
32418 <para>In the basic editor once you've opened a blank framework or imported a record via
32419 Z39.50 you will be presented with the form to continue cataloging</para>
32421 <screeninfo>Add MARC Record</screeninfo>
32424 <imagedata fileref="images/cataloging/addmarc.png"/>
32430 <para>If you would rather not see the MARC tag numbers you can change the value in
32431 your <link linkend="hide_marc">hide_marc</link> system preference or each user can
32432 check the box next to 'Show tags' found under 'Settings'.</para>
32435 <para>To expand a collapsed tag click on the tag description</para>
32438 <para>To get help from the Library of Congress on a Marc tag click the question mark
32439 (?) to the right of each field number</para>
32442 <para>If you feel that this clutters the screen you can hide the question marks by
32443 unchecking the box next to the 'Show MARC tag documentation links' note found
32444 under 'Settings' </para>
32449 <para>Sometimes fields may not be editable due to the value in your <link linkend="BiblioAddsAuthorities">BiblioAddsAuthorities</link> system preference. If
32450 you have this preference set to not allow catalogers to type in fields controlled by
32451 authorities you may see a lock symbol to the left of the field.</para>
32453 <screeninfo>Authority fields locked against editing</screeninfo>
32456 <imagedata fileref="images/cataloging/lockedauthority.png"/>
32462 <para>If this icon appears you must click the icon to the right of the field to
32463 search for an existing authority.</para>
32465 <screeninfo>Search for authority</screeninfo>
32468 <imagedata fileref="images/cataloging/catauthoritysearch.png"/>
32474 <para>From the results list click 'Choose authority' to bring that into your
32475 catalog record</para>
32477 <screeninfo>Authority search results</screeninfo>
32480 <imagedata fileref="images/cataloging/catauthoritysearchresults.png"/>
32488 <para>To duplicate a field click on the 'repeat this tag' icon to the right of the
32491 <screeninfo>Duplicate a Field</screeninfo>
32494 <imagedata fileref="images/cataloging/dupfield.png"/>
32500 <para>To move subfields in to the right order, click the up arrow to the left of
32504 <para>To duplicate a subfield click on the clone icon (to remove a copied field,
32505 click the delete clone icon) to the right of the field</para>
32507 <screeninfo>Clone Subfield</screeninfo>
32510 <imagedata fileref="images/cataloging/clonesubfield.png"/>
32516 <para>To remove a subfield (if there is more than one of the same type), click the
32517 - (minus sign) to the right of the field</para>
32522 <para>To use a plugin click on the icon to the right of the filed</para>
32524 <screeninfo>Leader Builder Plugin</screeninfo>
32527 <imagedata fileref="images/cataloging/leaderbuilder.png"/>
32533 <para>Some fixed fields have editors that will change based on the material type
32534 you're cataloging (for example the 006 and the 008 fields)</para>
32536 <screeninfo>008 Plugin</screeninfo>
32539 <imagedata fileref="images/cataloging/008plugin.png"/>
32547 <para>Once you've finished, click the 'Save' button at the top and choose whether you
32548 want to save and view the bib record you have created or continue on to add/edit
32549 items attached to the record</para>
32551 <screeninfo>Record save options</screeninfo>
32554 <imagedata fileref="images/cataloging/savecataloging.png"/>
32560 <para>Choosing 'Save and view record' will bring you right to the record you just
32564 <para>Choosing 'Save and edit items' will bring you to the add/edit item form
32565 after saving the bib record so that you can attach holdings</para>
32568 <para>Choosing 'Save and continute editing' will allow you to save your work so
32569 far and keep you in the editor to continue working</para>
32574 <para>If you are about to add a duplicate record to the system you will be warned
32575 before saving</para>
32577 <screeninfo>Duplicate Record Warning</screeninfo>
32580 <imagedata fileref="images/cataloging/duprecordwarn.png"/>
32587 <section id="advancededitor">
32588 <title><link linkend="advancededitor">Advanced Editor Cataloging</link></title>
32589 <para>In order to use the Advanced cataloging editor you need to enable the <link linkend="EnableAdvancedCatalogingEditor">EnableAdvancedCatalogingEditor</link>
32593 <para>This feature is currently experimental, and may have bugs that cause corruption
32594 of records. It also does not include any support for UNIMARC or NORMARC fixed
32595 fields. Please help us test it and report any bugs, but do so at your own risk.
32598 </para><para>In the advanced editor once you've opened a blank framework or imported a record
32599 via Z39.50 you will be presented with the form to continue cataloging<screenshot>
32600 <screeninfo>Advanced cataloging editor</screeninfo>
32603 <imagedata fileref="images/cataloging/advancededitor.png"/>
32606 </screenshot></para>
32607 <para>Using the search box on the left you can perform Z39.50 searches</para>
32609 <screeninfo>Advanced Z39.50 results</screeninfo>
32612 <imagedata fileref="images/cataloging/advancedzresults.png"/>
32616 <para>And from those Z39.50 results you can view the marc record by clicking the link to
32619 <screeninfo>Advanced Z39.50 results</screeninfo>
32622 <imagedata fileref="images/cataloging/advancedzviewmarc.png"/>
32626 <para>Clicking 'Import' will bring the record in to the editor where you can perform your
32629 <screeninfo>Advanced Cataloging</screeninfo>
32632 <imagedata fileref="images/cataloging/advancedcataloging.png"/>
32637 <para>When adding a new field in the Advanced Editor, you need to key underscores for a
32638 blank indicator, and surround the indicators with spaces. </para>
32641 <para>You need to key a space before the first subfield delimiter, but not before or
32642 after other subfield delimiters in the field. </para>
32644 <para>At the bottom of the editor you will see help from the Library of Congress for the
32645 field you are on. In cases where your MARC is invalid you will see red highlighting. To
32646 edit the record using only keyboard functions the Keyboard shortcuts button will inform
32647 you of the necessary commands</para>
32649 <screeninfo>Advanced Z39.50 results</screeninfo>
32652 <imagedata fileref="images/cataloging/advancedkeyshort.png"/>
32656 <section id="advancedkeyshortcuts">
32657 <title><link linkend="advancedkeyshortcuts">Advanced Cataloging Keyboard Shortcuts</link></title>
32658 <para>The following keyboard shortcuts can be used in the advanced cataloging module to
32659 save time and clicking.</para>
32660 <informaltable class="table table-condensed">
32662 <colspec colnum="1" colname="col1"/>
32663 <colspec colnum="2" colname="col2"/>
32666 <entry>Shortcut</entry>
32667 <entry>Behavior</entry>
32672 <entry>Ctrl-D</entry>
32673 <entry>Insert delimiter (‡)</entry>
32676 <entry>Ctrl-H</entry>
32677 <entry>Get help on current subfield</entry>
32680 <entry>Ctrl-S</entry>
32681 <entry>Save record</entry>
32684 <entry>Ctrl-X</entry>
32685 <entry>Delete current field</entry>
32688 <entry>Ctrl-Shift-X</entry>
32689 <entry>Delete current subfield</entry>
32692 <entry>Enter</entry>
32693 <entry>New field on next line</entry>
32696 <entry>Shift-Enter</entry>
32697 <entry>Insert line break</entry>
32701 <entry>Move to next position</entry>
32704 <entry>Shift-Tab</entry>
32705 <entry>Move to previous position</entry>
32711 <section id="macroscataloging">
32712 <title><link linkend="macroscataloging">Macros in Advanced Cataloging</link></title>
32713 <para>To record a new macro:<itemizedlist>
32715 <para>Select the "> Macros..." button</para>
32718 <para>A window will pop up. In this window, select "New macro...," key the new
32719 macro's name in the pop-up box and select OK.</para>
32722 <para>Now click to the right of the little number 1, and key the first line of
32723 your macro. For a multi-line, i.e., multi-field macro, hit the return key so
32724 that a little number 2 appears, and key the second line/field, etc.</para>
32727 <para>Your macros will be automatically saved. When finished you can select the
32728 "x" to close the window, or select a macro to run on the record that you're
32729 editing, or select another macro to run.</para>
32731 </itemizedlist></para>
32732 <para>To edit an existing macro:<itemizedlist>
32734 <para>Select the "> Macros..." button</para>
32737 <para>A window will pop up. In this window, select the macro that you wish to edit
32738 & make your changes. </para>
32741 <para>Your work will automatically be saved, and when finished you can select the
32742 "x" to close the window, or select a macro to run on the record that you're
32743 editing, or select another macro to run.</para>
32745 </itemizedlist></para>
32746 <para>The basic syntax of the macro language:</para>
32750 <para>new 500=‡aEdited with Rancor<itemizedlist>
32752 <para>Creates a new 500 with a ‡a subfield and sets it to "Edited with
32755 </itemizedlist></para>
32758 <para>245c= by J.K. Rowling.<itemizedlist>
32760 <para>Sets the first ‡c subfield of the first 245 tag in the record to " by
32761 J.K. Rowling", creating it if necessary.</para>
32763 </itemizedlist></para>
32766 <para>082a={084a}<itemizedlist>
32768 <para>Sets the ‡a subfield of the first 082 tag (creating the subfield if
32769 necessary) to the contents of the first 084‡a.</para>
32771 </itemizedlist></para>
32774 <para> indicators=_1<itemizedlist>
32776 <para>Sets the indicators of the last mentioned tag (in this case, 082) to
32777 "_" and "1".</para>
32779 </itemizedlist></para>
32782 <para> new 090a=Z674.75.W67<itemizedlist>
32784 <para>Creates a new ‡a subfield on the first 090 (but only if that field
32785 already exists) and sets it to Z674.75.W67.</para>
32787 </itemizedlist></para>
32790 <para>new 090a at end=Z674.75.W67<itemizedlist>
32792 <para>Same as above.</para>
32794 </itemizedlist></para>
32797 <para>new 245b after a= a tale of might and magic / <itemizedlist>
32799 <para>Creates a new ‡b after the first a subfield and sets it to " a tale of
32800 might and magic /".</para>
32802 </itemizedlist></para>
32805 <para>delete 245b<itemizedlist>
32807 <para>Deletes the first ‡b subfield on the first 245 to ‡b</para>
32809 </itemizedlist></para>
32817 <section id="cataloganalytics">
32818 <title><link linkend="cataloganalytics">Adding Analytic Records</link></title>
32820 <para>Libraries sometimes make journal articles and articles within
32821 monographs and serials accessible to library patrons through analytics
32822 cataloging. Analytics cataloging creates separate bibliographic
32823 records for these articles, chapters, sections, etc. found within a
32824 larger resource such as a book, an article within a journal, newspaper
32825 or serial. In analytics cataloging, although a separate bib record is
32826 created for the title, it is not physically separated from the host
32827 item. Learn more about Analytics in Chapter 13 of AACR2.</para>
32829 <para>If you would like to catalog analytic records there are two options. One is to use the
32830 <link linkend="catalogeasyanalytics">Easy Analytics</link> funtion; the other is the
32831 <link linkend="catalogenhanceanalytics">Analytics Enhanced Workflow</link>.</para>
32832 <section id="catalogeasyanalytics">
32833 <title><link linkend="catalogeasyanalytics">Easy Analytics</link></title>
32834 <para>The Easy Analytics feature makes linking analytic records together easier. The
32835 first thing you need to do is set the <link linkend="EasyAnalyticalRecords">EasyAnalyticalRecords</link> preference to 'Display' and the <link linkend="UseControlNumber">UseControlNumber</link> preference to 'Don't use.' </para>
32836 <para>After cataloging your analytic record (see <link linkend="addbibrec">Adding
32837 Records</link> for more on creating records) click 'Edit' from the normal view and
32838 choose to 'Link to Host Item'</para>
32840 <screeninfo>Link to Host Item</screeninfo>
32843 <imagedata fileref="images/cataloging/analyticslink.png"/>
32847 <para>This will prompt you to enter the barcode for the item this record should be linked
32850 <screeninfo>Barcode for Analytic Linking</screeninfo>
32853 <imagedata fileref="images/cataloging/analyticsbarcode.png"/>
32857 <para>After entering the item's barcode and clicking 'Select' you will receive a
32858 confirmation message.</para>
32860 <screeninfo>Analytic Link Success</screeninfo>
32863 <imagedata fileref="images/cataloging/analyticlinksuccess.png"/>
32867 <para>The record will now have the 773 field filled in properly to complete the
32870 <screeninfo>773</screeninfo>
32873 <imagedata fileref="images/cataloging/analytics773.png"/>
32877 <para>To view all of the items tied to the host record, do a search for the record, click
32878 the Analytics tab on the left and the analytics tied to each barcode will be shown under
32879 the "Used in" column.</para>
32881 <screeninfo>Analytics Tab</screeninfo>
32884 <imagedata fileref="images/cataloging/analyticstab.png"/>
32889 <para>It is also possible to create analytic records from this screen by clicking on
32890 "Create Analytics"</para>
32892 <para>You can also see the analytics attached to this record by clicking the 'Show
32893 Analytic' link towards the top of the record in the normal view.</para>
32895 <screeninfo>Show Analytics on Bib Record</screeninfo>
32898 <imagedata fileref="images/cataloging/anayticbib.png"/>
32902 <para>When looking at the anaytic record you will also see a link to the host item under
32903 the 'Host records' column in the holdings table when viewing the 'Analtyics' tab.</para>
32905 <screeninfo>Host Record</screeninfo>
32908 <imagedata fileref="images/cataloging/hostrecords.png"/>
32913 <section id="catalogenhanceanalytics">
32914 <title><link linkend="catalogenhanceanalytics">Analytics Enhanced Workflow </link></title>
32915 <para>To use the Enhanced Workflow method of adding analytics, the first thing you need to
32916 do is set the <link linkend="EasyAnalyticalRecords">EasyAnalyticalRecords</link>
32917 preference to 'Don't display' and the <link linkend="UseControlNumber">UseControlNumber</link> preference to 'Use.' </para>
32918 <para>After cataloging your original record (see <link linkend="addbibrec">Adding
32919 Records</link> for more on creating records) click 'New' from the normal view and
32920 choose to 'New child record.'</para>
32922 <screeninfo>New child record</screeninfo>
32925 <imagedata fileref="images/cataloging/analyticschildlink.png"/>
32929 <para>This will open a new blank record for cataloging. The blank record will only have
32930 the 773 field filled in properly to complete the link once the record is saved.</para>
32932 <screeninfo>773</screeninfo>
32935 <imagedata fileref="images/cataloging/analytics773child.png"/>
32939 <para>To view all of the items tied to the host record, do a search for the record, click
32940 the Analytics tab on the left and the analytics tied to each barcode will be shown under
32941 the "Used in" column.</para>
32943 <screeninfo>Analytics Tab</screeninfo>
32946 <imagedata fileref="images/cataloging/analyticstab.png"/>
32950 <para>You can also see the analytics attached to this record by clicking the 'Show
32951 Analytic' link towards the top of the record in the normal view.</para>
32953 <screeninfo>Show Analytics on Bib Record</screeninfo>
32956 <imagedata fileref="images/cataloging/anayticbib.png"/>
32960 <para>When looking at the anaytic record you will also see a link to the host item under
32961 the 'Host records' column in the holdings table when viewing the 'Analtyics' tab.</para>
32963 <screeninfo>Host Record</screeninfo>
32966 <imagedata fileref="images/cataloging/hostrecords.png"/>
32971 <section id="analyticediting">
32972 <title><link linkend="analyticediting">Editing Analytics</link></title>
32973 <para>If you have linked an analytic record incorrectly you can remove that link by
32974 editing the item on the analytic record (not the host record). To do this, go to the
32975 analytic record and click the 'Edit' button and choose to 'Edit items'. To the left of
32976 each item you will see two options.</para>
32978 <screeninfo>Edit Analytic Item Record</screeninfo>
32981 <imagedata fileref="images/cataloging/analyticdelink.png"/>
32987 <para>Clicking 'Edit in Host' will allow you to edit the item on the host
32991 <para>Clicking 'Delink' will remove the 773 field and the link between the analytic
32992 and the host.</para>
32998 <section id="editbibrec">
32999 <title><link linkend="editbibrec">Editing Records</link></title>
33001 <para>To edit a record you can click 'Edit Biblio' from the search
33002 results on the cataloging page</para>
33005 <screeninfo>Edit Biblio Option on Search Results</screeninfo>
33009 <imagedata fileref="images/cataloging/catalogsearch.png"/>
33014 <para>or by clicking the Edit button on the Bibliographic Record and
33015 choosing 'Edit Record'</para>
33018 <screeninfo>Edit Record Option on Bibliographic Record</screeninfo>
33022 <imagedata fileref="images/cataloging/editrecord.png"/>
33027 <para>The record will open in the MARC editor</para>
33030 <screeninfo>Editing MARC Record</screeninfo>
33034 <imagedata fileref="images/cataloging/editingrecord.png"/>
33039 <para>The alternative is to search via Z39.50 to overlay your record
33040 with a fuller record found at another library. You can do this by
33041 choosing 'Replace Record via Z39.50' from the Edit menu.</para>
33044 <screeninfo>Replace via Z39.50</screeninfo>
33048 <imagedata fileref="images/cataloging/replaceviaz39.png"/>
33053 <para>Once you choose that you will be brought to a Z39.50 search
33054 window to search other libraries for the record in question.</para>
33056 <para>Once you have made your edits (via either method) you can click
33057 'Save' at the top left of the editor.</para>
33059 <para>You can also use the edit menu to add your own custom cover
33060 image if you have either <link linkend="OPACLocalCoverImages">OPACLocalCoverImages</link> and/or
33061 <link linkend="LocalCoverImages">LocalCoverImages</link> set to
33062 'Display' by choosing 'Upload Image' from the menu.</para>
33065 <screeninfo>Upload Image</screeninfo>
33069 <imagedata fileref="images/cataloging/uploadimage.png"/>
33074 <para>Choosing to 'Upload Image' will take you to the <link linkend="uploadlocalimages">Upload Local Cover Image
33075 Tool</link>.</para>
33078 <section id="dupbibrec">
33079 <title><link linkend="dupbibrec">Duplicating Records</link></title>
33081 <para>Sometimes a copy of the record you need to catalog can't be
33082 found via Z39.50. In these cases you can create a duplicate of similar
33083 record and edit the necessary pieces to create a new record. To
33084 duplicate an existing record click 'Edit as New (Duplicate)' from the
33085 Edit menu on the Bibliographic Record</para>
33088 <screeninfo>Edit as New (Duplicate) Bibliographic
33089 Record</screeninfo>
33093 <imagedata fileref="images/cataloging/createduplicate.png"/>
33098 <para>This will open a new MARC record with the fields filled in with
33099 the values from the original Bibliographic Record.</para>
33102 <screeninfo>New Duplicate Record</screeninfo>
33106 <imagedata fileref="images/cataloging/newduprecord.png"/>
33111 <section id="uploadbibfile">
33112 <title><link linkend="uploadbibfile">Attaching files to Records</link></title>
33113 <para>If you would like to upload files to Koha you can do so with a few settings.<itemizedlist>
33115 <para>You will need to ask your system administrator to set the 'upload_path' config
33116 variable to point to where the files will be stored<itemizedlist>
33118 <para>You can see if your upload path is set correctly by visiting About Koha >
33119 System Information. If there is an error you will see it there.<screenshot>
33120 <screeninfo>Upload Path Warning</screeninfo>
33123 <imagedata fileref="images/cataloging/uploadwarning.png"/>
33126 </screenshot></para>
33128 </itemizedlist></para>
33131 <para>You will want to be sure that your <link linkend="OPACBaseURL">OPACBaseURL</link> system preference is set appropriately </para>
33134 <para>You will want to add the upload.pl plugin to the 856$u subfield in one (or
33135 multiple) of your <link linkend="editsubfields">frameworks</link></para>
33137 </itemizedlist></para>
33138 <para>Once you are all set up you can continue with cataloging as regular. You will see a
33139 plugin icon next to the 856$u that will open up the upload and/or search window<screenshot>
33140 <screeninfo>Upload file to record</screeninfo>
33143 <imagedata fileref="images/cataloging/uploadfilebib.png"/>
33146 </screenshot></para>
33147 <para>From this menu you can click browse to find a file and attach it, or you can search
33148 files you have uploaded previously using the search box. From the search results you can
33149 choose which file to attach.<screenshot>
33150 <screeninfo>Uploaded files</screeninfo>
33153 <imagedata fileref="images/cataloging/uploadedfiles.png"/>
33156 </screenshot></para>
33157 <para>Once the file is chosen it will appear as a link in the MARC record and on the detail
33161 <section id="mergebibs">
33162 <title><link linkend="mergebibs">Merging Records</link></title>
33163 <para>To merge bibliographic records together you will want to go to the Cataloging module
33164 and perform a search. </para>
33165 <para>If you see duplicates on that search results screen you can check the boxes next to
33166 the duplicates and click the 'Merge selected' button at the top of the results. </para>
33167 <para>Once you have selected the records you want to merge, click the 'Merge selected'
33168 button at the top of the list. You will be asked which of the records you would like to
33169 keep as your primary record and which will be deleted after the merge. If the records were
33170 created using different frameworks, Koha will also ask you what Framework you would like
33171 the newly merged record to use.</para>
33173 <screeninfo>Choose Primary Record for Merge</screeninfo>
33176 <imagedata fileref="images/lists/mergeprimary.png"/>
33180 <para>You will be presented with the MARC for all of the records (each accessible by
33181 tabs labeled with the bib numbers for those records). By default the entire first record
33182 will be selected, uncheck the fields you don't want in the final (destination) record and
33183 then move on to the second tab to choose which fields should be in the final (destination)
33186 <screeninfo>Merging Records</screeninfo>
33189 <imagedata fileref="images/lists/mergerecs.png"/>
33193 <para>Should you try to add a field that is not repeatable two times (like choosing
33194 the 245 field from both record #1 and #2) you will be presented with an error</para>
33196 <screeninfo>Non-repeatable Error</screeninfo>
33199 <imagedata fileref="images/lists/nondupfield.png"/>
33203 <para>Below the records you are merging is an option to enter fields to report on. This will
33204 allow you to control what fields you see on the merge confirmation page:</para>
33206 <screeninfo>Merge report fields</screeninfo>
33209 <imagedata fileref="images/lists/mergereportvalues.png"/>
33213 <para>If you enter nothing you will be presented with a confirmation of biblionumbers
33216 <screeninfo>Merge report</screeninfo>
33219 <imagedata fileref="images/lists/mergeblankreport.png"/>
33223 <para>If you enter fields you will see those on the confirmation page (you can set defaults
33224 with the <link linkend="MergeReportFields">MergeReportFields</link> preference)</para>
33226 <screeninfo>Merge report</screeninfo>
33229 <imagedata fileref="images/lists/mergereport.png"/>
33233 <para>Once you have completed your selections click the 'merge' button. The primary
33234 record will now CONTAIN the data you chose for it as well as all of the
33235 items/holdings from both bib records, and the second record will be deleted.<important>
33236 <para>It is important to rebuild your zebra index immediately after merging
33237 records. If a search is performed for a record which has been deleted Koha will
33238 present the patrons with an error in the OPAC.</para>
33239 </important></para>
33243 <para>If you would like you can also use the <link linkend="lists">Lists</link> tool for
33244 merging records together. <link linkend="mergebibrecs">Learn more here</link>.</para>
33248 <section id="deleterecord">
33249 <title><link linkend="deleterecord">Deleting Records</link></title>
33250 <para>To delete a bibliographic record simply choose the 'Edit' button and select 'Delete record'</para>
33252 <screeninfo>Delete record</screeninfo>
33255 <imagedata fileref="images/cataloging/deleterecord.png"/>
33259 <para>Bibliographic records can only be deleted one all items have been deleted. If you try
33260 to delete a bibliographic record with items still attached you will see that the delete
33261 option is grayed out.</para>
33263 <screeninfo>Record with items still attached</screeninfo>
33266 <imagedata fileref="images/cataloging/nodeleterecord.png"/>
33273 <section id="catitems">
33274 <title><link linkend="catitems">Item Records</link></title>
33276 <para>In Koha each bibliographic record can have one or more items
33277 attached. These items are sometimes referred to as holdings. Each item
33278 includes information to the physical copy the library has.</para>
33280 <section id="addingitems">
33281 <title><link linkend="addingitems">Adding Items</link></title>
33283 <para>After saving a new bibliographic record, you will be redirected
33284 to a blank item record so that you can attach an item to the
33285 bibliographic record. You can also click 'Add/Edit Items' from the
33286 cataloging search results</para>
33289 <screeninfo>Add/Edit Items Option on Search Results</screeninfo>
33293 <imagedata fileref="images/cataloging/catalogsearch.png"/>
33298 <para>or you can add new item at any time by clicking 'New' on the
33299 bibliographic record and choosing 'New Item'</para>
33302 <screeninfo>New Item Button</screeninfo>
33306 <imagedata fileref="images/cataloging/newitem.png"/>
33311 <para>The item edit form will appear:</para>
33314 <screeninfo>Add item form</screeninfo>
33318 <imagedata fileref="images/cataloging/additem.png"/>
33323 <para>At the very least, if you plan on circulating the item, the
33324 following fields should be entered for new items:</para>
33328 <para>2 - Source of classification</para>
33332 <para>a - Permanent location</para>
33336 <para>b - Current location</para>
33340 <para>o - Full call number<itemizedlist>
33342 <para>If you'd like you can use the <link linkend="cnbrowseplugin">call number
33343 browser plugin</link> for this field. If it's enabled you'll see a ... to the
33344 right of the field. When clicked that will open a call number browser window if
33345 the row is highlighted in Red then the call number is in use, if there is a thin
33346 Green line instead then the call number can be used.<screenshot>
33347 <screeninfo>Call number browser</screeninfo>
33350 <imagedata fileref="images/cataloging/cnbrowser.png"/>
33353 </screenshot></para>
33355 </itemizedlist></para>
33359 <para>p - Barcode</para>
33363 <para>v - Cost, replacement price</para>
33367 <para>This value will be charged to patrons when you mark an
33368 item they have checked out as 'Lost'</para>
33374 <para>y - Koha item type</para>
33378 <para>To make sure that these values are filled in you can mark them
33379 as mandatory in the <link linkend="marcbibframeworks">framework</link>
33380 you're using and then they will appear in red with a 'required' label.
33381 The item will not save until the required fields are filled in.</para>
33384 <screeninfo>Required Item Subfield</screeninfo>
33388 <imagedata fileref="images/cataloging/requireditemfields.png"/>
33396 <para>To make item subfields required in a framework you'll want
33397 to edit the 952 field in the <link linkend="marcbibframeworks">framework editor</link>.</para>
33402 <para>Below the add form there are 3 buttons for adding the
33406 <screeninfo>Add Item Buttons</screeninfo>
33410 <imagedata fileref="images/cataloging/additembuttons.png"/>
33417 <para>Add Item will add just the one item</para>
33421 <para>Add & Duplicate will add the item and fill in a new form
33422 with the same values for your to alter</para>
33426 <para>Add Multiple items will ask how many items and will then add that number of items
33427 adding +1 to the barcode so each barcode is unique</para>
33431 <para>Your added items will appear above the add form once
33435 <screeninfo>Items</screeninfo>
33439 <imagedata fileref="images/cataloging/items.png"/>
33444 <para>Your items will also appear below the bibliographic details on
33445 the bib record display.</para>
33448 <screeninfo>List of Items on the Bib Record</screeninfo>
33452 <imagedata fileref="images/cataloging/items-withoutlabelprint.png"/>
33457 <para>If you have <link linkend="SpineLabelShowPrintOnBibDetails">SpineLabelShowPrintOnBibDetails</link>
33458 set to 'Display' then there will also be a link to print a quick spine
33459 label next to each item.</para>
33462 <screeninfo>List of Items on the Bib Record with a Print Label
33467 <imagedata fileref="images/cataloging/items-withlabelprint.png"/>
33471 <para>You can also filter the contents of your holdings table by clicking the 'Activate
33472 filters' links. This will show a row at the top where you can type in any column to
33473 filter the results in the table.</para>
33475 <screeninfo>Filter holdings</screeninfo>
33478 <imagedata fileref="images/cataloging/items-activatefilters.png"/>
33484 <section id="editingitems">
33485 <title><link linkend="editingitems">Editing Items</link></title>
33487 <para>Items can be edited in several ways.</para>
33491 <para>Clicking 'Edit' and 'Edit Items' from the bibliographic
33495 <screeninfo>Edit Items Menu Option</screeninfo>
33499 <imagedata fileref="images/cataloging/edititem.png"/>
33504 <para>Which will open up a list of items where you can click the 'Actions' button to the
33505 left of the specific item you would like to edit and choose 'Edit'.</para>
33508 <screeninfo>Edit individual items</screeninfo>
33512 <imagedata fileref="images/cataloging/edititemlink.png"/>
33519 <para>Clicking 'Edit Items' beside the item on the 'Items'
33523 <screeninfo>Items Tab</screeninfo>
33527 <imagedata fileref="images/cataloging/itemstab.png"/>
33532 <para>Which will open up the editor on the item you'd like to edit</para>
33535 <screeninfo>Edit individual items</screeninfo>
33539 <imagedata fileref="images/cataloging/edititemlinkfromtab.png"/>
33546 <para>Clicking 'Edit' and then 'Edit items in batch'</para>
33549 <screeninfo>Edit items in a batch</screeninfo>
33553 <imagedata fileref="images/cataloging/editinbatch.png"/>
33558 <para>This will open up the <link linkend="batchmodifyitems">batch
33559 item modification tool</link> where you can edit all of the items
33560 on this record as a batch.</para></listitem>
33561 <listitem><para>You can also enable <link linkend="StaffDetailItemSelection">StaffDetailItemSelection
33562 </link> to have checkboxes appear to the left of each item
33563 on the detail display. You can then check off the items you would like to edit and
33564 click 'Modify selected items' at the top of the list.</para>
33566 <screeninfo>Editing selected items</screeninfo>
33569 <imagedata fileref="images/cataloging/editwithitemchecks.png"/>
33575 <para>You can click 'Edit' to the right of each item in the Holdings tab<screenshot>
33576 <screeninfo>Edit individual items</screeninfo>
33579 <imagedata fileref="images/cataloging/editindividual.png"/>
33582 </screenshot></para>
33585 <para>There is also a link to Edit items from the search results in the staff client<screenshot>
33586 <screeninfo>Edit item on the search results</screeninfo>
33589 <imagedata fileref="images/cataloging/edititemssearch.png"/>
33592 </screenshot></para>
33595 <para>Finally you can use the <link linkend="batchmodifyitems">Batch Item
33596 Modification</link> tool</para>
33600 <section id="itemquickedit">
33601 <title><link linkend="itemquickedit">Quick Item Status Updates</link></title>
33603 <para>Often circulation staff need to change the status of an item
33604 to Lost or Damaged. This doesn't require you to edit the entire item
33605 record. Instead clicking on the item barcode on the checkout summary
33606 or checkin history will bring you to an item summary. You can also
33607 get to the item summary by clicking on the Items tab to the left of
33608 the bib detail page.</para>
33611 <screeninfo>Item Edit</screeninfo>
33615 <imagedata fileref="images/cataloging/quickitemedit.png"/>
33620 <para>From this view you can mark an item lost by choosing a lost
33621 status from the pull down and clicking the 'Set Status'
33625 <screeninfo>Edit Lost Status</screeninfo>
33629 <imagedata fileref="images/cataloging/editloststatus.png"/>
33634 <para>You can also mark an item as damaged by choosing a damaged
33635 status from the pull down and clicking the 'Set Status'
33639 <screeninfo>Edit Damaged Status</screeninfo>
33643 <imagedata fileref="images/cataloging/editdamagedstatus.png"/>
33648 <section id="duplicateitem">
33649 <title><link linkend="duplicateitem">Duplicating Items</link></title>
33650 <para>You can easily duplicate each item by clicking the 'Action' button the left of each
33651 item on the edit items screen</para>
33653 <screeninfo>Edit individual items</screeninfo>
33656 <imagedata fileref="images/cataloging/edititemlink.png"/>
33660 <para>From here you can choose to 'Duplicate' the item and this will populate the form
33661 with the values from the item you chose.</para>
33665 <section id="iteminfo">
33666 <title><link linkend="iteminfo">Item Information</link></title>
33668 <para>To the left of every bibliographic record there is a tab to view
33672 <screeninfo>Items Tab</screeninfo>
33676 <imagedata fileref="images/cataloging/quickitemedit.png"/>
33681 <para>Clicking that tab will give you basic information about the items. From here you can
33682 see basic information about the item such as the home library, item type, collection code,
33683 call number and replacement price. You can also see and edit the status information. If
33684 an item is marked lost or withdrawn you will also see the date that status was applied.<screenshot>
33688 <imagedata fileref="images/cataloging/itemstatuses.png"/>
33691 </screenshot></para>
33692 <para>In the History section you will see infomration about the check out history of the
33693 item and if you ordered the item via the acquisitions module then this section will
33694 include information about the order.</para>
33697 <screeninfo>History with order info</screeninfo>
33701 <imagedata fileref="images/cataloging/itemorderinfo.png"/>
33706 <para>If the Order or Accession date is linked, clicking it will bring
33707 you to the acquisitions information for that item.</para>
33710 <section id="moveitemrec">
33711 <title><link linkend="moveitemrec">Moving Items</link></title>
33713 <para>Items can be moved from one bibliographic record to another
33714 using the Attach Item option</para>
33717 <screeninfo>Attach Item Option</screeninfo>
33721 <imagedata fileref="images/cataloging/attachitem.png"/>
33726 <para>Visit the bibliographic record you want to attach the item to
33727 and choose 'Attach Item' from the 'Edit' menu.</para>
33730 <screeninfo>Attach Item Form</screeninfo>
33734 <imagedata fileref="images/cataloging/attachitemform.png"/>
33739 <para>Simply enter the barcode for the item you want to move and click
33742 <para>If you want to move all items to a new record creating only one
33743 bibliographic record you can use the <link linkend="mergebibrecs">Merge Records tool</link> instead.</para>
33746 <section id="deleteitems">
33747 <title><link linkend="deleteitems">Deleting Items</link></title>
33749 <para>There are many ways to delete item records. If you only need to
33750 delete one item you can do this by opening up the detail page for the
33751 bib record and clicking the 'Edit' button at the top. From there you
33752 can choose to 'Edit items'.</para>
33755 <screeninfo>'Edit Items' menu option</screeninfo>
33759 <imagedata fileref="images/cataloging/edititemstodelete.png"/>
33764 <para>You will be presented with a list of items and next to each one
33765 will be a link labeled 'Delete'. Click that link and if the item is
33766 not checked out it will delete that item.</para>
33769 <screeninfo>Delete link on the left</screeninfo>
33773 <imagedata fileref="images/cataloging/deleteitemlink.png"/>
33778 <para>If you know that all of the items attached to your record are
33779 not currently checked out you can use the 'Delete all items' option
33780 under the 'Edit menu' and it will remove all items from the
33782 <para>You can also enable <link linkend="StaffDetailItemSelection">StaffDetailItemSelection</link>
33783 to have checkboxes appear to the left of each item on
33784 the detail display. You can then check off the items you would like to delete and click
33785 'Delete selected items' at the top of the list.</para>
33787 <screeninfo>Deleting selected items</screeninfo>
33790 <imagedata fileref="images/cataloging/editwithitemchecks.png"/>
33795 <para>Finally you can use the <link linkend="batchdeleteitems">batch
33796 delete tool</link> to delete a batch of items.</para>
33799 <section id="itemcirchistory">
33800 <title><link linkend="itemcirchistory">Item Specific Circulation History</link></title>
33802 <para>Each bibliographic record keeps a circulation history (with or
33803 without the patron information depending on your settings), but each
33804 item also has its own circulation history page. To see this, click on
33805 the 'Items' tab to the left of the record you are viewing.</para>
33808 <screeninfo>Items tab</screeninfo>
33812 <imagedata fileref="images/cataloging/itemstab-long.png"/>
33817 <para>Below the 'History' heading is a link to 'View item's checkout
33818 history,' clicking that will open up the item's history which will
33819 look slightly different from the bibliographic record's history
33823 <screeninfo>Item Specific Circulation History</screeninfo>
33827 <imagedata fileref="images/cataloging/itemspecifichistory.png"/>
33834 <section id="catauthorities">
33835 <title><link linkend="catauthorities">Authorities</link></title>
33837 <para>Authority records are a way of controlling fields in your MARC
33838 records. Using authority records will provide you with control over
33839 subject headings, personal names and places.</para>
33841 <section id="addauthorities">
33842 <title><link linkend="addauthorities">Adding Authorities</link></title>
33844 <para>To add a new authority record you can either choose the authority type from the 'New
33845 Authority' button or search another library by clicking the 'New from Z39.50'
33849 <screeninfo>New Authority Record Options</screeninfo>
33853 <imagedata fileref="images/cataloging/newauthtypes.png"/>
33858 <para>If you choose to enter a new authority from scratch, the form that appears will allow
33859 you to enter all of the necessary details regarding your authority record.</para>
33862 <screeninfo>New Authority Record</screeninfo>
33866 <imagedata fileref="images/cataloging/newauthrec.png"/>
33871 <para>To expand collapsed values simply click on the title and the
33872 subfields will appear. To duplicate a field or subfield just click the
33873 plus sign (+) to the right of the label. To use field helper plugins
33874 simply click the ellipsis (...) to the right of the field.</para>
33876 <para>When linking authorities to other headings, you can use the
33877 authority finder plugin by clicking the ellipsis (...) to the right of
33881 <screeninfo>Authority search plugin</screeninfo>
33885 <imagedata fileref="images/cataloging/creatnewauthfromlink.png"/>
33890 <para>From there you can search your authority file for the authority
33891 to link. If you can't find the authority to link, you can click the
33892 'Create new' button and add the necessary authority for the link. This
33893 plugin also allows for you to choose the link relationship between the
33894 authorities.</para>
33897 <screeninfo>Authority relationships</screeninfo>
33901 <imagedata fileref="images/cataloging/authrelationships.png"/>
33905 <para>If you choose to search another library for the authority record you will be presented
33906 with a search box</para>
33908 <screeninfo>Authority Z39.50 Search</screeninfo>
33911 <imagedata fileref="images/cataloging/authzsearch.png"/>
33915 <para>From the results you can choose the 'Import' link to the right of the record you would
33916 like to add to Koha</para>
33918 <screeninfo>Authority Z39.50 Results</screeninfo>
33921 <imagedata fileref="images/cataloging/authimport.png"/>
33925 <para>You will then be presented with the form to edit the authority before saving it to
33928 <screeninfo>Imported Authority</screeninfo>
33931 <imagedata fileref="images/cataloging/authorityimported.png"/>
33937 <section id="searchauthorities">
33938 <title><link linkend="searchauthorities">Searching Authorities</link></title>
33940 <para>From the authorities page you can search for existing terms and
33941 the bibliographic records they are attached to.</para>
33944 <screeninfo>Authority Search</screeninfo>
33948 <imagedata fileref="images/cataloging/authoritysearch.png"/>
33953 <para>From the results you will see the authority record, how many bibliographic records it
33954 is attached to, an <link linkend="editauthorities">edit</link> link, a <link linkend="authoritymerge">merge</link> link and a <link linkend="editauthorities">delete</link> link (if there are no bibliographic records attached).</para>
33957 <screeninfo>Authority Search Results</screeninfo>
33961 <imagedata fileref="images/cataloging/authorityresults.png"/>
33966 <para>Clicking on the Details link to the right of the authority
33967 record summary will open the full record and the option to edit the
33971 <screeninfo>Authority Record</screeninfo>
33975 <imagedata fileref="images/cataloging/authrecord.png"/>
33980 <para>If the authority has See Alsos in it you will see those broken
33981 out on the search results, clicking the linked headings will run a
33982 search for that heading instead.</para>
33985 <screeninfo>See Also in Authorities</screeninfo>
33989 <imagedata fileref="images/cataloging/authoritiesseealso.png"/>
33995 <section id="editauthorities">
33996 <title><link linkend="editauthorities">Editing Authorities</link></title>
33998 <para>Authorities can be edited by clicking on the authority summary from the search results
33999 and then clicking the 'Edit' button above the record. Or by clicking on the 'Edit' link to
34000 the left of the authority on the search results.</para>
34003 <screeninfo>Edit Authority Record</screeninfo>
34007 <imagedata fileref="images/cataloging/editauthority.png"/>
34012 <para>Once you've made the necessary edits, simply click 'Save' and <link linkend="dontmerge">dontmerge</link> is set to 'Do', Koha will immediately update all of
34013 the bib records linked to the authority with the new authority record's data. If dontmerge
34014 is set to "Don't" then Koha won't edit bib records when changes are made to authorities,
34015 rather, this is done later by the <link linkend="mergeauthcron">merge_authority.pl
34016 cronjob</link>.</para>
34018 <para>To delete an authority record you first must make sure it's not
34019 linked to any bibliographic records. If it is not used by any
34020 bibliographic records a 'Delete' link will appear to the right of the
34021 record on the search results and as a button that appears after
34022 clicking on the summary of the authority record.</para>
34024 <section id="authoritymerge">
34025 <title><link linkend="authoritymerge">Merging Authorities</link></title>
34026 <para>If you have duplicate authority records you can merge them together by clicking the
34027 'Merge' link next to two results on an authority search. </para>
34029 <screeninfo>Duplicate authorities results</screeninfo>
34032 <imagedata fileref="images/cataloging/dupauth.png"/>
34036 <para>After clicking 'Merge' on the first result you will see that authority listed at the
34037 top of the results.</para>
34039 <screeninfo>Merging authorities results</screeninfo>
34042 <imagedata fileref="images/cataloging/authmergesearch.png"/>
34046 <para>Next you need to click 'Merge' next to the second result you'd like to merge. </para>
34047 <para>You will be asked which of the two records you would like to keep as your primary
34048 record and which will be deleted after the merge.</para>
34050 <screeninfo>Merging authorities</screeninfo>
34053 <imagedata fileref="images/cataloging/authmergechoice.png"/>
34057 <para>You will be presented with the MARC for both of the records (each accessible by tabs
34058 labeled with the authority numbers for those records). By default the entire first record
34059 will be selected, uncheck the fields you don't want in the final (destination) record and
34060 then move on to the second tab to choose which fields should be in the final (destination)
34063 <screeninfo>Authorities to merge</screeninfo>
34066 <imagedata fileref="images/cataloging/authmerging.png"/>
34070 <para>Once you have completed your selections click the 'Merge' button. The primary record
34071 will now contain the data you chose for it and the second record will be deleted.</para>
34073 <screeninfo>Merged authority</screeninfo>
34076 <imagedata fileref="images/cataloging/authmerged.png"/>
34083 <section id="catguides">
34084 <title><link linkend="catguides">Cataloging Guides</link></title>
34088 <section id="bibcatcheatsheet">
34092 <firstname>Jared</firstname>
34093 <surname>Camins-Esakov</surname>
34095 <orgname>American Numismatic Society</orgname>
34100 <firstname>Nicole C.</firstname>
34101 <surname>Engard</surname>
34102 <contrib>Changed/edited content where necessary.</contrib>
34106 <pubdate>2010</pubdate>
34108 <title><link linkend="bibcatcheatsheet">Bibliographic Record Cataloging Cheat Sheet</link></title>
34110 <table cellpadding="4" cellspacing="4" frame="all">
34111 <title>Cataloging Guide</title>
34113 <tgroup align="left" cols="4" colsep="1" rowsep="1">
34116 <entry><para>Tag</para></entry>
34118 <entry><para>Label</para></entry>
34120 <entry><para>Description</para></entry>
34122 <entry><para>Instructions</para></entry>
34128 <entry><para>000</para></entry>
34130 <entry><para>LEADER</para></entry>
34132 <entry><para>Describes the record(i.e. surrogate) -- is it a
34133 record for a monograph? A serial?</para></entry>
34135 <entry><para>Click in this field to fill it in. Then set
34136 "Bibliographic level" to 'a' for articles or 's' for serials.
34137 Otherwise, leave everything as is.</para></entry>
34141 <entry><para>001</para></entry>
34143 <entry><para>CONTROL NUMBER</para></entry>
34145 <entry><para>Accession number.</para></entry>
34147 <entry><para>Enter the accession number written inside the
34148 item here. For articles and items which do not have accession
34149 numbers, leave blank.</para></entry>
34153 <entry><para>003</para></entry>
34155 <entry><para>CONTROL NUMBER IDENTIFIER</para></entry>
34157 <entry><para>Your MARC Organizational Code</para></entry>
34159 <entry><para>Click in this field to fill it in (will auto fill
34160 if you have your <link linkend="MARCOrgCode">MARCOrgCode</link> preference
34161 set).</para></entry>
34165 <entry><para>005</para></entry>
34167 <entry><para>D & T LATEST TRANSACTION</para></entry>
34169 <entry><para>Current date and time.</para></entry>
34171 <entry><para>Click in this field to fill it in.</para></entry>
34175 <entry><para>008</para></entry>
34177 <entry><para>FIXED-LENGTH DATA ELEMENTS</para></entry>
34179 <entry><para>Field containing computer-readable
34180 representations of a number of things.</para></entry>
34182 <entry><para>Generally you will only use 's' (single) or 'm'
34183 (multiple) options for position 06- use the former when the
34184 item was published in a single year, the latter when it was
34185 published over the course of several. If there is a single
34186 date, only enter a date in the first date field (positions
34187 07-10). Enter the three-digit country code in positions 15-17,
34188 being sure to add spaces if the country code is fewer than
34189 three characters long. If there is an index, note that fact in
34190 position 31. Enter the three-letter language code in positions
34191 35-37.</para></entry>
34195 <entry><para>010</para></entry>
34197 <entry><para>LCCN</para></entry>
34199 <entry><para>A number assigned by the Library of Congress to
34200 uniquely identify the work.</para></entry>
34202 <entry><para>Check on the copyright page of the book (if it
34203 was published in the US) or the LC catalog for this number. If
34204 you can't find it, don't worry about it.</para></entry>
34208 <entry><para>020</para></entry>
34210 <entry><para>ISBN</para></entry>
34212 <entry><para>Unique number used by publishers to identify
34213 books.</para></entry>
34215 <entry><para>If this number isn't listed on the book, there
34216 probably isn't one.</para></entry>
34220 <entry><para>022</para></entry>
34222 <entry><para>ISSN</para></entry>
34224 <entry><para>Unique number used by publishers to identify
34225 serials.</para></entry>
34227 <entry><para>If this number isn't listed on the book, there
34228 probably isn't one.</para></entry>
34232 <entry><para>033</para></entry>
34234 <entry><para>DATE/TIME OF EVENT</para></entry>
34236 <entry><para>Used for auction dates. Required for auction
34237 catalogs.</para></entry>
34239 <entry><para>For auctions that took place on only one day,
34240 enter the date of the auction in the format YYYYMMDD in the
34241 subfield 'a' and a '0' in the first indicator. For auctions
34242 that took place over two consecutive days or any number of
34243 non-consecutive days, create a subfield 'a' for each day with
34244 the date in the format YYYYMMDD, and put a '1' in the first
34245 indicator. For auctions that took place over more than two
34246 consecutive days, create a subfield 'a' (in format YYYYMMDD)
34247 for the first day and a subfield 'a' (also in format YYYYMMDD)
34248 for the last day, and put a '2' in the first
34249 indicator.</para></entry>
34253 <entry><para>040</para></entry>
34255 <entry><para>CATALOGING SOURCE</para></entry>
34257 <entry><para>Identifies which libraries created and modified
34258 the record.</para></entry>
34260 <entry><para>For imported records, add a subfield 'd' with
34261 your OCLC code as the value. For new records, make sure that
34262 the subfield 'c' with your OCLC code as the
34263 value.</para></entry>
34267 <entry><para>041</para></entry>
34269 <entry><para>LANGUAGE CODE</para></entry>
34271 <entry><para>Identifies all the languages used in an item,
34272 when two or more languages are present.</para></entry>
34274 <entry><para>For significant portions of a text in a given
34275 language, there should be a subfield 'a' with that language
34276 code. If there are only summaries or abstracts in a specific
34277 language, create a subfield 'b' with that language
34278 code.</para></entry>
34282 <entry><para>100</para></entry>
34284 <entry><para>MAIN ENTRY--PERSONAL</para></entry>
34286 <entry><para>Authorized form of the main author's
34287 name</para></entry>
34289 <entry><para>See Authorized headings sheet and AACR2. The
34290 first indicator should generally be a '1', to indicate that
34291 the entry is surname first. If the name consists only of a
34292 forename, however, the first indicator should be
34293 '0'.</para></entry>
34297 <entry><para>110</para></entry>
34299 <entry><para>MAIN ENTRY--CORPORATE</para></entry>
34301 <entry><para>Authorized form of the name of the main corporate
34302 author. Required for auction catalogs.</para></entry>
34304 <entry><para>Auction catalogs should use a 110 field rather
34305 than a 100 field. See Authorized headings sheet and AACR2. Set
34306 the first indicator to '2'.</para></entry>
34310 <entry><para>111</para></entry>
34312 <entry><para>MAIN ENTRY--MEETING</para></entry>
34314 <entry><para>Authorized form of the name of a meeting which
34315 acted as a main offer (e.g. conference
34316 proceedings)</para></entry>
34318 <entry><para>See Authorized headings sheet and AACR2. Set the
34319 first indicator to '2'.</para></entry>
34323 <entry><para>245</para></entry>
34325 <entry><para>TITLE STATEMENT</para></entry>
34327 <entry><para>Transcription of the title statement from the
34328 title page (or chief source of information)</para></entry>
34330 <entry><para>Enter the title in subfield 'a', the subtitle in
34331 subfield 'b', and the statement of responsibility in subfield
34332 'c'. If you are creating a record for a single volume or part
34333 of a multi-part item, you should put the part number in
34334 subfield 'n' and the part title in subfield 'p.' For auction
34335 catalogs, the date (in 'MM/DD/YYYY' format) should be listed
34336 in square brackets in subfield 'f'. See ISBD punctuation
34337 sheet. Set the first indicator to '0' if there is no author,
34338 otherwise set it to '1'. Set the second indicator to the
34339 number of non-filing characters (i.e. characters in an initial
34340 articles plus the space... for "The " set the second indicator
34341 to '4').</para></entry>
34345 <entry><para>246</para></entry>
34347 <entry><para>VARYING FORM OF TITLE</para></entry>
34349 <entry><para>Alternate form of title for searching and filing
34350 purposes</para></entry>
34352 <entry><para>If the patron might look for the work under a
34353 different title, enter it here. Do not include initial
34354 articles. The first indicator should be '3', unless the title
34355 is merely a variant spelling, in which case the first
34356 indicator should be '1'.</para></entry>
34360 <entry><para>250</para></entry>
34362 <entry><para>EDITION STATEMENT</para></entry>
34364 <entry><para>Transcription of the edition statement from the
34365 title page (or chief source of information)</para></entry>
34367 <entry><para>Transcribe the edition statement exactly as it
34368 appears on the title-page. You may abbreviate if the edition
34369 statement is very long.</para></entry>
34373 <entry><para>260</para></entry>
34375 <entry><para>PUBLICATION (IMPRINT)</para></entry>
34377 <entry><para>Publication information.</para></entry>
34379 <entry><para>Put the location of publication in subfield 'a',
34380 the publisher in subfield 'b', and the year (or probable year)
34381 in subfield 'c'. See ISBD punctuation sheet.</para></entry>
34385 <entry><para>300</para></entry>
34387 <entry><para>PHYSICAL DESCRIPTION</para></entry>
34389 <entry><para>Physical description</para></entry>
34391 <entry><para>Enter the pagination statement in subfield 'a', a
34392 brief description of "special" contents such as illustrations
34393 or maps in subfield 'b' (see AACR2), and the size of the item
34394 in subfield 'c'. See ISBD punctuation sheet.</para></entry>
34398 <entry><para>490</para></entry>
34400 <entry><para>SERIES STATEMENT</para></entry>
34402 <entry><para>Shows the series statement exactly as it appears
34403 on the item.</para></entry>
34405 <entry><para>Transcribe the series statement into subfield 'a'
34406 with the volume number in subfield 'v'. See ISBD punctuation
34407 sheet. Set the first indicator to '1' if you are using an 830.
34408 As a general rule, you should do so.</para></entry>
34412 <entry><para>500</para></entry>
34414 <entry><para>GENERAL NOTE</para></entry>
34416 <entry><para>Notes that don't fit anywhere
34417 else.</para></entry>
34419 <entry><para>Enter notes as full sentences, with a separate
34420 500 field for each distinct topic.</para></entry>
34424 <entry><para>501</para></entry>
34426 <entry><para>WITH NOTE</para></entry>
34428 <entry><para>Notes whether the work is bound with the works
34429 described by other records.</para></entry>
34431 <entry><para>Put description of relationship in subfield
34432 'a'.</para></entry>
34436 <entry><para>504</para></entry>
34438 <entry><para>BIBLIOGRAPHY, ETC. NOTE</para></entry>
34440 <entry><para>Indicates whether the work includes a
34441 bibliography.</para></entry>
34443 <entry><para>If the work includes a bibliography and index,
34444 put the text "Includes bibliographical references (p. XXX-XXX)
34445 and index." in subfield 'a'. If the work does not include an
34446 index, remove that part of the sentence. If the references are
34447 scattered throughout the work and not gathered into a distinct
34448 sentence, remove the parenthetical statement.</para></entry>
34452 <entry><para>505</para></entry>
34454 <entry><para>FORMATTED CONTENTS</para></entry>
34456 <entry><para>List of contents in a standard format.
34457 Unformatted contents can be listed in a 500 (General Note)
34458 field.</para></entry>
34460 <entry><para>See ISBD punctuation sheet. Set the first
34461 indicator to '0'. If you are separately coding authors and
34462 titles, set the second indicator to '0'. Otherwise, leave the
34463 second indicator blank.</para></entry>
34467 <entry><para>518</para></entry>
34469 <entry><para>DATE/TIME OF EVENT NOTE</para></entry>
34471 <entry><para>Used for auction dates.</para></entry>
34473 <entry><para>For auction catalogs, enter the date of the
34474 auction in the format 'January 2, 1984' in the subfield
34479 <entry><para>520</para></entry>
34481 <entry><para>SUMMARY, ETC.</para></entry>
34483 <entry><para>A brief summary or abstract of the book or
34484 article.</para></entry>
34486 <entry><para>In general you do not need to write a summary. A
34487 summary might be called for, however, with items that cannot
34488 be easily reviewed by a patron, such as books with highly
34489 acidic paper or CD-ROMs.</para></entry>
34493 <entry><para>546</para></entry>
34495 <entry><para>LANGUAGE NOTE</para></entry>
34497 <entry><para>Note describing the languages used in the
34498 work</para></entry>
34500 <entry><para>Only needed for works in multiple languages. See
34501 ISBD punctuation sheet.</para></entry>
34505 <entry><para>561</para></entry>
34507 <entry><para>PROVENANCE INFORMATION</para></entry>
34509 <entry><para>Describes the previous ownership of the
34510 item.</para></entry>
34512 <entry><para>Used only for rare books.</para></entry>
34516 <entry><para>563</para></entry>
34518 <entry><para>BINDING INFORMATION</para></entry>
34520 <entry><para>Describes the binding of the item.</para></entry>
34522 <entry><para>Used only for rare books.</para></entry>
34526 <entry><para>590</para></entry>
34528 <entry><para>LOCAL NOTE</para></entry>
34530 <entry><para>Local notes. Required for auction
34531 catalogs.</para></entry>
34533 <entry><para>Used for auction catalogs to indicate what types
34534 of coins are sold in the auction- Roman, Greek,
34535 etc.</para></entry>
34539 <entry><para>600</para></entry>
34541 <entry><para>SUBJECT ADDED--PERSONAL</para></entry>
34543 <entry><para>Authorized form of personal names for people
34544 discussed in the work</para></entry>
34546 <entry><para>See Authorized headings sheet and AACR2. The
34547 first indicator should generally be a '1', to indicate that
34548 the entry is surname first. If the name consists only of a
34549 forename, however, the first indicator should be '0'. If you
34550 found the name in the LC authority file, set the second
34551 indicator to '0'. Otherwise set the second indicator to
34552 '4'.</para></entry>
34556 <entry><para>610</para></entry>
34558 <entry><para>SUBJECT ADDED--CORPORATE</para></entry>
34560 <entry><para>Authorized form of corporate names for
34561 organizations discussed in the work</para></entry>
34563 <entry><para>See Authorized headings sheet and AACR2. Set the
34564 first indicator to '2'. If you found the name in the LC
34565 authority file, set the second indicator to '0'. Otherwise set
34566 the second indicator to '4'.</para></entry>
34570 <entry><para>611</para></entry>
34572 <entry><para>SUBJECT ADDED--MEETING</para></entry>
34574 <entry><para>Authorized form of meeting names for meetings
34575 discussed in the work</para></entry>
34577 <entry><para>See Authorized headings sheet and AACR2. Set the
34578 first indicator to '2'. If you found the name in the LC
34579 authority file, set the second indicator to '0'. Otherwise set
34580 the second indicator to '4'.</para></entry>
34584 <entry><para>630</para></entry>
34586 <entry><para>SUBJECT ADDED--UNIFORM TITLE</para></entry>
34588 <entry><para>Authorized form of titles for other works
34589 discussed in the work</para></entry>
34591 <entry><para>See Authorized headings sheet and AACR2. Set the
34592 first indicator to the number of non-filing characters (i.e.
34593 characters in an initial articles plus the space... for "The "
34594 set the first indicator to '4'). If you found the name in the
34595 LC authority file, set the second indicator to '0'. Otherwise
34596 set the second indicator to '4'.</para></entry>
34600 <entry><para>650</para></entry>
34602 <entry><para>SUBJECT ADDED--TOPICAL</para></entry>
34604 <entry><para>Library of Congress Subject Heading terms
34605 describing the subject of the work</para></entry>
34607 <entry><para>See Authorized headings sheet and AACR2. If you
34608 found the name in the LC authority file, set the second
34609 indicator to '0'. Otherwise set the second indicator to
34610 '4'.</para></entry>
34614 <entry><para>651</para></entry>
34616 <entry><para>SUBJECT ADDED--GEOGRAPHICAL</para></entry>
34618 <entry><para>Library of Congress Subject Heading geographical
34619 terms describing the subject of the work</para></entry>
34621 <entry><para>See Authorized headings sheet and AACR2. If you
34622 found the name in the LC authority file, set the second
34623 indicator to '0'. Otherwise set the second indicator to
34624 '4'.</para></entry>
34628 <entry><para>655</para></entry>
34630 <entry><para>INDEX TERM--GENRE/FORM</para></entry>
34632 <entry><para>Describes what an item is as opposed to what the
34633 item is about.</para></entry>
34635 <entry><para>Generally used only for auction catalogs, which
34636 should have the genre heading "Auction catalogs." (make sure
34637 to find the authorized heading!) If you found the name in the
34638 LC authority file, set the second indicator to '0'. If you are
34639 using a term from a specific thesaurus, set the second
34640 indicator to '7' and put the code for the thesaurus in
34641 subfield '2'. Otherwise set the second indicator to
34642 '4'.</para></entry>
34646 <entry><para>690</para></entry>
34648 <entry><para>LOCAL SUBJECT ADDED--TOPICAL</para></entry>
34650 <entry><para>Used for headings from any custom subject
34651 authority file.</para></entry>
34653 <entry><para>If there is no appropriate LCSH term, you can use
34654 a 690 with subject headings you find on other items in the
34655 catalog.</para></entry>
34659 <entry><para>691</para></entry>
34661 <entry><para>LOCAL SUBJECT ADDED--GEOGRAPHICAL</para></entry>
34663 <entry><para>Used for headings from any custom subject
34664 authority file.</para></entry>
34666 <entry><para>If there is no appropriate LCSH term, you can use
34667 a 691 with subject headings you find on other items in the
34668 catalog.</para></entry>
34672 <entry><para>700</para></entry>
34674 <entry><para>ADDED ENTRY--PERSONAL</para></entry>
34676 <entry><para>Used for second authors and other persons related
34677 to the production of the work.</para></entry>
34679 <entry><para>See Authorized headings sheet and AACR2. The
34680 first indicator should generally be a '1', to indicate that
34681 the entry is surname first. If the name consists only of a
34682 forename, however, the first indicator should be
34683 '0'.</para></entry>
34687 <entry><para>710</para></entry>
34689 <entry><para>ADDED ENTRY--CORPORATE</para></entry>
34691 <entry><para>Used for corporate bodies related to the
34692 production of the work (e.g. publishers).</para></entry>
34694 <entry><para>See Authorized headings sheet and AACR2. Set the
34695 first indicator to '2'.</para></entry>
34699 <entry><para>711</para></entry>
34701 <entry><para>ADDED ENTRY--MEETING</para></entry>
34703 <entry><para>Used for meetings related to the production of
34704 the work (e.g. symposia that contributed to the
34705 work).</para></entry>
34707 <entry><para>See Authorized headings sheet and AACR2. Set the
34708 first indicator to '2'.</para></entry>
34712 <entry><para>730</para></entry>
34714 <entry><para>ADDED ENTRY--UNIFORM TITLE</para></entry>
34716 <entry><para>Used for uniform titles related to the production
34717 of the work (e.g. a work that inspired the present
34718 work)</para></entry>
34720 <entry><para>See Authorized headings sheet and AACR2. Set the
34721 first indicator to the number of non-filing characters (i.e.
34722 characters in an initial articles plus the space... for "The "
34723 set the first indicator to '4').</para></entry>
34727 <entry><para>773</para></entry>
34729 <entry><para>HOST ITEM ENTRY</para></entry>
34731 <entry><para>Describes the larger bibliographic unit that
34732 contains the work (e.g. book or journal containing the article
34733 being described in the current record)</para></entry>
34735 <entry><para>If the host publication is author main entry,
34736 enter the authorized form of the author's name in subfield
34737 'a'. Put the title in subfield 't'. If the host publication is
34738 an independent work, put publication information in subfield
34739 'd'. When available, ISSN and ISBN should always be used in,
34740 in subfields 'x' and 'z' respectively. Relationship
34741 information (e.g. volume number, page number, etc.) goes in
34742 subfield 'g'. Subfield 'q' contains an encoded representation
34743 of the location of the item: volume, issue, and section
34744 numbers are separated by colons, and the first page is entered
34745 following a '<' at the end of the subfield. See ISBD
34746 punctuation sheet. Set the first indicator to '0'. If you want
34747 the label "In:" to be generated, leave the second indicator
34748 blank. If you want something else displayed before the 773
34749 text, set the second indicator to '8' and add a subfield 'i'
34750 with the label you want at the beginning of the field (e.g.
34751 "$iOffprint from:").</para></entry>
34755 <entry><para>830</para></entry>
34757 <entry><para>SERIES ENTRY--UNIFORM TITLE</para></entry>
34759 <entry><para>Authorized form of the series name transcribed in
34760 the 490 field. Often this will just be the same as the
34761 490.</para></entry>
34763 <entry><para>See Authorized headings sheet and AACR2. Set the
34764 second indicator to the number of non-filing characters (i.e.
34765 characters in an initial articles plus the space... for "The "
34766 set the second indicator to '4').</para></entry>
34770 <entry><para>852</para></entry>
34772 <entry><para>LOCATION/CALL NUMBER</para></entry>
34774 <entry><para>Provides the section name for pre-barcode books,
34775 pamphlets, and some articles and serials.</para></entry>
34777 <entry><para>Do not put anything in this field if you are
34778 cataloging a volume which gets only one record and a barcode.
34779 If the item does not get a barcode, or you are currently
34780 creating a record for an article in a volume, put the section
34781 in subfield 'a' (see ANS cataloging documentation), and the
34782 call number in subfield 'i'. Set the first indicator to
34783 '8'.</para></entry>
34787 <entry><para>856</para></entry>
34789 <entry><para>ELECTRONIC ACCESS</para></entry>
34791 <entry><para>Links to material available
34792 online.</para></entry>
34794 <entry><para>Put the URL of any electronic copies or
34795 summaries, etc. in subfield 'u' and a link title in subfield
34796 'y'. Set the first indicator to '4'.</para></entry>
34800 <entry><para>942</para></entry>
34802 <entry><para>ADDED ENTRY ELEMENTS (KOHA)</para></entry>
34804 <entry><para>Used for Koha-specific data.</para></entry>
34806 <entry><para>Set the subfield 'c' to the appropriate item
34807 type.</para></entry>
34814 <section id="itemcatguide">
34815 <title><link linkend="itemcatguide">Item/Holdings Record Cataloging Guide</link></title>
34817 <para>This table represents the default embedded holdings data in Koha. This information can
34818 be used for migration or importing data purposes</para>
34820 <table cellpadding="4" cellspacing="4" frame="all">
34821 <title>Koha Embedded Holdings Data</title>
34823 <tgroup align="left" cols="4" colsep="1" rowsep="1">
34824 <colspec colname="tag" colnum="1"/>
34826 <colspec colname="data" colnum="2"/>
34828 <colspec colname="desc" colnum="3"/>
34830 <colspec colname="note" colnum="4"/>
34834 <entry><para>MARC21 Tag/subfield</para></entry>
34836 <entry><para>Data Element</para></entry>
34838 <entry><para>Description</para></entry>
34840 <entry><para>Notes</para></entry>
34846 <entry><para>952$0</para></entry>
34848 <entry><para>Withdrawn status</para></entry>
34850 <entry><para>Default values: </para> <itemizedlist>
34852 <para>0 = Not withdrawn</para>
34856 <para>1 = Withdrawn</para>
34858 </itemizedlist></entry>
34860 <entry><para>Coded value, matching <link linkend="authorizedvalues">Authorized Value</link> category
34861 ('WITHDRAWN' in default installation)</para></entry>
34865 <entry><para>952$1</para></entry>
34867 <entry><para>Lost status</para></entry>
34869 <entry><para>Default values:</para> <itemizedlist>
34871 <para>0 = Available</para>
34875 <para>1 = Lost</para>
34879 <para>2 = Long Overdue (Lost)</para>
34883 <para>3 = Lost and Paid For</para>
34887 <para>4 = Missing in Inventory</para>
34891 <para>5 = Missing in Hold Queue</para>
34893 </itemizedlist></entry>
34895 <entry><para>It's possible to configure OPAC so that lost
34896 items don't display with the <link linkend="hidelostitems">hidelostitems</link> system
34897 preference. </para> <para>Coded value, matching <link linkend="authorizedvalues">Authorized Value</link> category
34898 ('LOST' in default installation)</para></entry>
34902 <entry><para>952$2</para></entry>
34904 <entry><para>Classification</para></entry>
34906 <entry><para>Classification scheme that defines filing rules
34907 used for sorting call numbers.</para></entry>
34909 <entry><para>A choice of <link linkend="classificationsources">classification sources</link>
34910 as they are defined in administration. If no classification
34911 scheme is entered, the system will use the value entered in
34912 the <link linkend="DefaultClassificationSource">DefaultClassificationSource</link>
34913 preference.</para></entry>
34917 <entry><para>952$3</para></entry>
34919 <entry><para>Materials specified</para></entry>
34921 <entry><para>Specific issues of serials or multi-part
34922 items.</para></entry>
34924 <entry><para>Displayed when items are checked out and in to
34925 tell the staff how many pieces the item has. Copy/volume data
34926 is stored in 952$h and $t for display in Normal
34927 views.</para></entry>
34931 <entry><para>952$4</para></entry>
34933 <entry><para>Damaged status</para></entry>
34935 <entry><para>Default values: </para> <itemizedlist>
34937 <para>0 = Not damaged</para>
34941 <para>1 = Damaged</para>
34943 </itemizedlist></entry>
34945 <entry><para>Coded value, matching <link linkend="authorizedvalues">Authorized Value</link> category
34946 ('DAMAGE' in default installation)</para></entry>
34950 <entry><para>952$5</para></entry>
34952 <entry><para>Use restrictions</para></entry>
34954 <entry><para>Default values:</para> <itemizedlist>
34956 <para>0 = No use restrictions</para>
34960 <para>1 = Restricted Access</para>
34962 </itemizedlist></entry>
34964 <entry><para>Coded value, matching <link linkend="authorizedvalues">Authorized Value</link> category
34965 ('RESTRICT' in default installation). This value has no effect
34966 on circulation.</para></entry>
34970 <entry><para>952$7</para></entry>
34972 <entry><para>Not for loan</para></entry>
34974 <entry><para>Default values:</para> <itemizedlist>
34976 <para>-1 = Ordered</para>
34980 <para>0 = Available for loans</para>
34984 <para>1 = Not for Loan</para>
34988 <para>2 = Staff Collection</para>
34990 </itemizedlist></entry>
34992 <entry><para>Coded value, matching <link linkend="authorizedvalues">Authorized Value</link> category
34993 ('NOT_LOAN' in default installation). Negative number values
34994 can still be placed on hold.</para></entry>
34998 <entry><para>952$8</para></entry>
35000 <entry><para>Collection code</para></entry>
35002 <entry><para>Coded value</para></entry>
35004 <entry><para>Coded value, matching <link linkend="authorizedvalues">Authorized Value</link> category
35005 ('CCODE' in default installation)</para></entry>
35009 <entry><para>952$9</para></entry>
35011 <entry><para>Item number</para></entry>
35013 <entry><para>System-generated item number.</para></entry>
35015 <entry><para>Does not display in the item
35016 record.</para></entry>
35020 <entry><para>952$a</para></entry>
35022 <entry><para>Owning Library **</para></entry>
35024 <entry><para>Branch code</para></entry>
35026 <entry><para><emphasis role="bold">Required</emphasis>. Code
35027 must be defined in <link linkend="libsgroups">Libraries,
35028 Branches and Groups</link></para></entry>
35032 <entry><para>952$b</para></entry>
35034 <entry><para>Holding library ** (usually the same as 952$a
35037 <entry><para>Branch code</para></entry>
35039 <entry><para><emphasis role="bold">Required</emphasis>. Code
35040 must be defined in <link linkend="libsgroups">Libraries,
35041 Branches and Groups</link></para></entry>
35045 <entry><para>952$c</para></entry>
35047 <entry><para>Shelving location code</para></entry>
35049 <entry><para/></entry>
35051 <entry><para>Coded value, matching <link linkend="authorizedvalues">Authorized Value</link> category
35052 ('LOC' in default installation)</para></entry>
35056 <entry><para>952$d</para></entry>
35058 <entry><para>Date acquired</para></entry>
35060 <entry><para>YYYY-MM-DD</para></entry>
35062 <entry><para>Date formats in the 952 subfields are required to
35063 be in the system internal format for data loading and
35064 subsequent item editing: YYYY-MM-DD</para></entry>
35068 <entry><para>952$e</para></entry>
35070 <entry><para>Source of acquisition</para></entry>
35072 <entry><para>Coded value or vendor string</para></entry>
35074 <entry><para>Filled in automatically with the Koha assigned
35075 vendor id by Acquisitions when an item is
35076 received.</para></entry>
35080 <entry><para>952$g</para></entry>
35082 <entry><para>Purchase price</para></entry>
35084 <entry><para>Decimal number, no currency symbol (ex.
35085 10.00)</para></entry>
35087 <entry><para>Filled in automatically by Acquisitions when an
35088 item is received.</para></entry>
35092 <entry><para>952$h</para></entry>
35094 <entry><para>Serial enumeration</para></entry>
35096 <entry><para/></entry>
35098 <entry><para>Filled in automatically by Serials if the issue
35099 is received there.</para></entry>
35103 <entry><para>952$o</para></entry>
35105 <entry><para>Koha full call number</para></entry>
35107 <entry><para/></entry>
35109 <entry><para>Can be filled in automatically based on the <link linkend="itemcallnumber">itemcallnumber</link> system
35110 preference.</para></entry>
35114 <entry><para>952$p</para></entry>
35116 <entry><para>Barcode *</para></entry>
35118 <entry><para>Max 20 characters</para></entry>
35120 <entry><para/></entry>
35124 <entry><para>952$t</para></entry>
35126 <entry><para>Copy number</para></entry>
35128 <entry><para>Max 32 characters</para></entry>
35130 <entry><para/></entry>
35137 <para>Uniform Resource Identifier </para>
35140 <para>Item specific URL</para>
35143 <para>Full URL starting with http:// Only needed if your item has its own URL, not
35144 necessary if the bib record has a 856$u that applies to all items on the record.
35153 <para>Replacement price</para>
35156 <para>Decimal number, no currency symbol (ex. 10.00)</para>
35159 <para>Filled in automatically by Acquisitions when an item is received.</para>
35164 <entry><para>952$w</para></entry>
35166 <entry><para>Price effective from</para></entry>
35168 <entry><para>YYYY-MM-DD</para></entry>
35170 <entry>Date formats in the 952 subfields are required to be in
35171 the system internal format for data loading and subsequent
35172 item editing: YYYY-MM-DD. Filled in automatically by
35173 Acquisitions when an item is received.</entry>
35180 <para>Nonpublic note</para>
35185 <entry>This is a note field for notes that will not appear in the OPAC. Right now
35186 this note does not appear anywhere but in the item edit screen in the staff
35191 <entry><para>952$y</para></entry>
35193 <entry><para>Koha item type **</para></entry>
35195 <entry><para>Coded value, required field for
35196 circulation</para></entry>
35198 <entry><para><emphasis role="bold">Required</emphasis>. Coded
35199 value, must be defined in <link linkend="itemtypeadmin">Item
35200 types</link></para></entry>
35204 <entry><para>952$z</para></entry>
35206 <entry><para>Public note</para></entry>
35208 <entry><para/></entry>
35210 <entry><para/></entry>
35216 <para>* - required for circulation</para>
35218 <para>** - required by Koha</para>
35221 <section id="onorderitemholds">
35223 <corpauthor>VOKAL</corpauthor>
35226 <firstname>Nicole C.</firstname>
35228 <surname>Engard</surname>
35231 <pubdate>2010</pubdate>
35233 <bibliosource><ulink url="http://docs.google.com/View?id=dcccx9zm_3htvhwzgc#Handling_On_Order_items_and_ho">http://docs.google.com/View?id=dcccx9zm_3htvhwzgc#Handling_On_Order_items_and_ho</ulink></bibliosource>
35236 <title><link linkend="onorderitemholds">Handling On Order Items and Holds</link></title>
35238 <para>If you tend to import your MARC records when you have ordered
35239 the book (as opposed to when you receive the books), and allow patrons
35240 to place holds on those books, you may need to add item records to the
35241 *.mrc file before importing.</para>
35243 <para>The easiest way to import your latest order is to first run your records through
35244 <ulink url="http://marcedit.reeset.net/">MARCEdit</ulink>. Download your MARC records,
35245 saving them to your desktop or some other location you use/will remember. If you have
35246 MARCEdit already installed you should simply have to double click on your MARC records,
35247 and they will automatically open in MARCEdit.<important>
35248 <para>This tutorial was written with MARCEdit version 5.2.3769.41641 on Windows XP,
35249 instructions may be different if your version or operating system is different.</para>
35250 </important></para>
35254 <para>Your original file will automatically be in the input;
35255 ensure MarcBreaker is chosen, and then click "Execute"</para>
35258 <screeninfo>MarcBreaker</screeninfo>
35262 <imagedata fileref="images/appendix-onorder/marcbreaker.png"/>
35269 <para>You will be presented with a summary of the records
35270 processed at the bottom of the screen</para>
35273 <screeninfo>MarcBreaker Summary</screeninfo>
35277 <imagedata fileref="images/appendix-onorder/marcbreaker-summary.png"/>
35284 <para>Click 'Edit Records' to continue on to adding item
35289 <para>Your screen will be replaced with a larger screen containing
35290 the MARC records</para>
35293 <screeninfo>MARC file for editing</screeninfo>
35297 <imagedata fileref="images/appendix-onorder/editrecords.png"/>
35304 <para>Click on Tools > Add/Edit Field</para>
35307 <screeninfo>Add/Delete Field</screeninfo>
35311 <imagedata fileref="images/appendix-onorder/addfield.png"/>
35318 <para>Enter in the Koha specific item info</para>
35321 <screeninfo>Add 942 Field</screeninfo>
35325 <imagedata fileref="images/appendix-onorder/add942.png"/>
35332 <para>In the Field box, type 942</para>
35336 <para>In the Field Data box, type \\$c and the item type code
35337 (\\$cBOOK in this example)</para>
35341 <para>Check the 'Insert last' option</para>
35345 <para>Click 'Add Field'</para>
35351 <para>Enter in the item record data</para>
35354 <screeninfo>Add 952 Field</screeninfo>
35358 <imagedata fileref="images/appendix-onorder/add952.png"/>
35365 <para>In the Field box, type 952</para>
35369 <para>In the Field Data box, type
35370 $7ORDERED_STATUS$aPERM_LOC$bCURR_LOC$cSHELVING_LOCATION$eSOURCE_OF_ACQ$yITEM_TYPE</para>
35374 <para>ex. $7-1$aCPL$bCPL$cNEW$eBrodart$yBOOK</para>
35378 <para>In a default install of Koha -1 is the value for
35379 the Ordered status</para>
35385 <para>You may want to look at other subfields you would
35386 like data in -- for example, changing the collection code
35387 to put all the items in the same collection (8),
35388 automatically fill in the acquisition date (d), or put in
35389 a public note (z).</para>
35393 <para>Be sure you use the $ to separate subfields; adding
35394 each subfield on a separate line will cause that many
35395 items to be imported with your MARC record (in the example
35396 above, four items, each with one of those subfields
35401 <para>Make sure you look at the Administration >
35402 Authorized Values in Koha to put the correct code into the
35409 <para>Check the 'Insert last' option</para>
35413 <para>Click 'Add Field'</para>
35419 <para>Close the field editor window</para>
35423 <para>Click on File > Compile into MARC</para>
35426 <screeninfo>Compile into MARC</screeninfo>
35430 <imagedata fileref="images/appendix-onorder/compile.png"/>
35437 <para>Choose where to save your file</para>
35441 <para>Now you want to go into your Koha system and follow the
35442 instructions for <link linkend="stagemarc">importing MARC
35443 records</link>.</para>
35445 <para>Once the item has come in, you will need to go to the item
35446 record and individually change the item to have the correct barcode,
35447 and manually change the status from Ordered to the blank line in the
35448 Not for Loan field.</para>
35451 <para>If you purchase your cataloged item records, you may want to
35452 request your vendor put in the information you need into the MARC
35453 records for you; that way, you could import the edited-by-the-vendor
35454 file, overwriting the current record, automatically replacing the
35455 data with what you need.</para>
35460 <chapter id="coursereserves">
35461 <title>Course Reserves</title>
35462 <para>The course reserves module in Koha allows you to temporarily move items to 'reserve' and
35463 assign different circulation rules to these items while they are being used for a specific
35465 <section id="coursesetup">
35466 <title><link linkend="coursesetup">Course Reserves Setup</link></title>
35467 <para>Before using Course Reserves you will need to do some set up. </para>
35468 <para>First you will need to enable course reserves by setting the <link linkend="UseCourseReserves">UseCourseReserves</link> preference to 'Use'.</para>
35469 <para>Next you will need to have all of your course instructors <link linkend="addnewpatron">added as patrons</link>.</para>
35470 <para>Next you will want to add a couple of new <link linkend="newauthval">authorized
35471 values</link> for Departments and Terms. </para>
35472 <para>You may also want to create new <link linkend="additemtype">item types</link>, <link linkend="ccode">collection codes</link> and/or <link linkend="shelvelocvals">shelving
35473 locations</link> to make it clear that the items are on reserve to your patrons. You will
35474 also want to be sure to confirm that your <link linkend="circfinerules">circulation and fine
35475 rules</link> are right for your new item types (whether they be hourly or daily
35478 <section id="addingcourses">
35479 <title><link linkend="addingcourses">Adding Courses</link></title>
35480 <para>Once you have completed your set up for Course Reserves you can start creating courses
35481 and adding titles to the reserve list.</para>
35483 <screeninfo>Course Reserves Admin</screeninfo>
35486 <imagedata fileref="images/coursereserves/coursesblank.png"/>
35490 <para>From the main course reserves page you can add a new course by clicking the 'New course'
35491 button at the top left.</para>
35493 <screeninfo>Add a new course</screeninfo>
35496 <imagedata fileref="images/coursereserves/newcourse.png"/>
35500 <para>Your new course will need a Department, Number and Name at the bare minimum. You can
35501 also add in additional details like course section number and term. To link an instructor to
35502 this course simply start typing their name and Koha will search your patron database to find
35503 you the right person.</para>
35505 <screeninfo>Instrcutor search</screeninfo>
35508 <imagedata fileref="images/coursereserves/instructorsearch.png"/>
35512 <para>Once the instructor you want appears just click their name and they will be added. You
35513 can repeat this for all instructors on this course. Each instructor will appear above the
35514 search box and can be removed by clicking the 'Remove' link to the right of their name.</para>
35516 <screeninfo>Instructors</screeninfo>
35519 <imagedata fileref="images/coursereserves/instructorremove.png"/>
35523 <para>If you would like your course to show publicly you'll want to be sure to check the
35524 'Enabled?' box before saving your new course.</para>
35525 <para>Once your course is saved it will show on the main course reserves page and be
35526 searchable by any field in the course.</para>
35528 <screeninfo>Courses</screeninfo>
35531 <imagedata fileref="images/coursereserves/courses.png"/>
35536 <section id="addreserves">
35537 <title><link linkend="addreserves">Adding Reserve Materials </link></title>
35538 <para>Before adding reserve materials you will need at least one course to add them to. To
35539 add materials visit the Course Reserves module.</para>
35541 <screeninfo>Courses</screeninfo>
35544 <imagedata fileref="images/coursereserves/courses.png"/>
35548 <para>Click on the title of the course you would like to add materials to.</para>
35550 <screeninfo>Course administration</screeninfo>
35553 <imagedata fileref="images/coursereserves/courseadmin.png"/>
35557 <para>At the top of the course description click the 'Add reserves' button to add titles to
35558 this reserve list. You will be asked to enter the barcode for the reserve item.</para>
35560 <screeninfo>Add item to reserve</screeninfo>
35563 <imagedata fileref="images/coursereserves/addbarcode.png"/>
35567 <para>After you are done scanning the barcodes to add to the course you can see them on the
35570 <screeninfo>Course with reserves</screeninfo>
35573 <imagedata fileref="images/coursereserves/coursewithreserves.png"/>
35578 <section id="opaccoursereserves">
35579 <title><link linkend="opaccoursereserves">Course Reserves in the OPAC</link></title>
35580 <para>Once you have enabled Course Reserves and added courses you will see a link to Course
35581 Reserves below your search box in the OPAC.</para>
35583 <screeninfo>Course Reserves Link</screeninfo>
35586 <imagedata fileref="images/coursereserves/courselinkopac.png"/>
35590 <para>Clicking that link will show you your list of enabled courses (if you have only one
35591 course you will just see the contents of that one course).</para>
35593 <screeninfo>Course list in the OPAC</screeninfo>
35596 <imagedata fileref="images/coursereserves/coursesopac.png"/>
35600 <para>You can search course reserves by any field (course number, course name, instructor
35601 name, department) that is visible in the list of courses. Clicking a course name will show
35602 you the details and reserve items.</para>
35604 <screeninfo>Course listing</screeninfo>
35607 <imagedata fileref="images/coursereserves/courseopac.png"/>
35614 <chapter id="serials">
35615 <title>Serials</title>
35617 <para>Serials actions can be accessed by going to the More menu at the top
35618 of your screen and choosing Serials or by clicking Serials on the main
35619 Koha staff client page. The Serials module in Koha is used for keeping
35620 track of journals, newspapers and other items that come on a regular
35621 schedule. As with all modules, make sure you go through the related <link linkend="impserials">Implementation Checklist</link> before using the
35622 Serials module.</para>
35626 <para><emphasis>Get there:</emphasis> More > Serials</para>
35629 <section id="serialfreq">
35630 <title><link linkend="serialfreq">Manage Serial Frequencies</link></title>
35631 <para>Koha keeps a record of publication frequencies for easy management and
35632 duplication.</para>
35635 <para><emphasis>Get there:</emphasis> More > Serials > Manage frequencies</para>
35638 <para>From this page you can view all of the existing frequencies in your system</para>
35640 <screeninfo>Frequencies</screeninfo>
35643 <imagedata fileref="images/serials/frequencies.png"/>
35647 <para>and create new ones.</para>
35649 <screeninfo>New frequency</screeninfo>
35652 <imagedata fileref="images/serials/newfrequency.png"/>
35657 <section id="serialpatterns">
35658 <title><link linkend="serialpatterns">Manage Serial Numbering Patterns</link></title>
35659 <para>Everytime you create a new numbering pattern in serials you can save it for later use.
35660 These patters are accessible via the Manage numbering patterns page.</para>
35663 <para><emphasis>Get there:</emphasis> More > Serials > Manage numbering patterns</para>
35666 <para>This page will list for you the numbering patterns you have saved in the past as well as
35667 a few canned patterns.</para>
35669 <screeninfo>Number patterns</screeninfo>
35672 <imagedata fileref="images/serials/numpatterns.png"/>
35677 <para>If you have upgraded from a previous version of Koha you will see 'Backup patterns'
35678 listed for patterns used in version before Koha 3.14. This is how Koha saved your old
35679 numbering patterns. You can edit these to give them more meaningful names from
35681 </note>It will also allow you to create a new numbering pattern without first adding a
35682 subscription. To add new new pattern click 'New numbering pattern' at the top of the list of
35685 <screeninfo>New number pattern</screeninfo>
35688 <imagedata fileref="images/serials/newnumpattern.png"/>
35693 <section id="serialfields">
35694 <title><link linkend="serialfields">Custom Subscription Fields</link></title>
35695 <para>This module will allow you to add custom fields to your serial subscriptions for
35696 reporting and searching.</para>
35700 <para><emphasis>Get there:</emphasis> Serials > Add subscription fields</para>
35704 <para>To add custom fields simply click the 'Add subscription fields' link on the left of the
35705 Serial page and choose the 'New field' button<screenshot>
35706 <screeninfo>Add subscription fields</screeninfo>
35709 <imagedata fileref="images/serials/newfield.png"/>
35712 </screenshot></para>
35713 <para>The form that appears will ask for either an authorized value or a marc field to
35714 populate the field with</para>
35717 <screeninfo>Add field</screeninfo>
35720 <imagedata fileref="images/serials/addfield.png"/>
35725 <para>For example you might want to track which department you're ordering for or the
35726 collection code for this serial<screenshot>
35727 <screeninfo>Add department</screeninfo>
35730 <imagedata fileref="images/serials/adddept.png"/>
35733 </screenshot></para>
35734 <para>This data will then show when you are adding a subscription<screenshot>
35735 <screeninfo>Add field value</screeninfo>
35738 <imagedata fileref="images/serials/addingfieldvalues.png"/>
35741 </screenshot></para>
35742 <para>and when you view the subscription<screenshot>
35743 <screeninfo>Show field</screeninfo>
35746 <imagedata fileref="images/serials/showfields.png"/>
35749 </screenshot></para>
35750 <para>and when you search subscriptions (if you chose to make it 'searchable')<screenshot>
35751 <screeninfo>Searchable field</screeninfo>
35754 <imagedata fileref="images/serials/searchfield.png"/>
35757 </screenshot></para>
35760 <section id="newsubscription">
35761 <title><link linkend="newsubscription">Add a subscription</link></title>
35763 <para>Subscriptions can be added by clicking the 'New' button on any
35764 bibliographic record</para>
35767 <screeninfo>New Subscription Button</screeninfo>
35771 <imagedata fileref="images/serials/newsubfrombib.png"/>
35776 <para>Or by visiting the Serials module and clicking 'New
35777 Subscription'</para>
35780 <screeninfo>New Subscription Button</screeninfo>
35784 <imagedata fileref="images/serials/newsubbutton.png"/>
35789 <para>If you are entering a new subscription from the Serials module you
35790 will be presented with a blank form (if creating new from a
35791 bibliographic record the form will include the bib info).</para>
35794 <screeninfo>Add a new subscription (1/2)</screeninfo>
35798 <imagedata fileref="images/serials/addsub.png"/>
35805 <para>'Librarian' field will show the logged in librarian's
35810 <para>'Vendor' can be found by either searching vendors entered via
35811 the <link linkend="acqmodule">Acquisitions module</link> or entering
35812 the vendor ID number</para>
35816 <para>Vendor information is not required</para>
35820 <para>In order to claim missing and late issues you need to
35821 enter vendor information</para>
35824 <screeninfo>Vendor Missing Warning</screeninfo>
35828 <imagedata fileref="images/serials/vendorwarning.png"/>
35837 <para>'Biblio' is the MARC record you'd like to link this
35838 subscription to</para>
35842 <para>This can be done by searching for an existing record by
35843 clicking on the 'Search for Biblio' link below the boxes or by
35844 entering the bib number for a record in the first box. Only if
35845 you search with the field between the parenthesis.</para>
35851 <para>Next you can choose whether a new item is created when receiving an issue (if you
35852 barcode issues you'll want to create an item at this time)</para>
35855 <para>In order to determine how to handle irregularities in your subscription answer 'When
35856 there is an irregular issue', if the numbers are always sequential you'll want to pick
35857 'Keep issue number'</para>
35860 <para>Checking the 'Manual history' box will allow you to enter serials outside the
35861 prediction pattern once the subscription is saved by going to the 'Planning' tab on the
35862 subscription detail page.<screenshot>
35863 <screeninfo>Manual History</screeninfo>
35866 <imagedata fileref="images/serials/manualhistory.png"/>
35869 </screenshot></para>
35872 <para>'Call Number' is for your item's call number or call number prefix</para>
35875 <para>'Library' is the branch that owns this subscription.</para>
35878 <para>If more than one library subscribes to this serial you will need to create a
35879 subscription for each library</para>
35882 <para>This can be done easily by using the 'Edit as New (Duplicate)' option found on
35883 the subscription information page and changing only the 'Library' field</para>
35885 <screeninfo>New Duplicate Subscription</screeninfo>
35888 <imagedata fileref="images/serials/newasdup.png"/>
35896 <para>Use the 'Public Note' for any notes you would like to appear in the OPAC for the
35900 <para>'Nonpublic Note' should be used for notes that are only visible to the librarians
35901 via the staff client</para>
35904 <para>The 'Patron notification' option lets you pick a notice to send to patrons who
35905 subscribe to updates on this serial via the OPAC.</para>
35908 <para>For this option to appear you need to make sure that you have a Routing List
35909 notice set up in the <link linkend="notices">Notices Tool</link></para>
35915 <para>'Location' is for the shelving location</para>
35919 <para>The 'Grace period' is the number of days before an issue is automatically moved from
35920 'Expected' status to 'Waiting' and how many days before an issue is automatically moved
35921 from 'Waiting' status to 'Late'</para>
35925 <para>The Staff and OPAC Display options allow you to control how
35926 many issues appear by default on bibliographic records in the Staff
35927 Client and the OPAC</para>
35931 <para>If no values are entered in these fields, they will use
35932 the <link linkend="OPACSerialIssueDisplayCount">OPACSerialIssueDisplayCount</link>
35933 and <link linkend="StaffSerialIssueDisplayCount">StaffSerialIssueDisplayCount</link>
35934 system preference values</para>
35939 <para>Once that data is filled in you can click 'Next' to enter the prediction pattern information.</para>
35941 <screeninfo>Add a new subscription (2/2)</screeninfo>
35944 <imagedata fileref="images/serials/addsub2.png"/>
35950 <para>In 'First issue publication date' you want to enter the date
35951 of the issue you have in your hand, the date from which the
35952 prediction pattern will start</para>
35956 <para>There are several pre-defined options for the 'Frequency' of publication all of
35957 which are visible alongside your own custom frequencies by visiting '<link linkend="serialfreq">Manage frequencies</link>'</para>
35961 <para>Without periodicy: some very specific (usually high level
35962 science journals) don't have a true periodicity. When you
35963 subscribe to the title, you subscribe for 6 issues, which can
35964 arrive in 1 year... or 2... There is no regularity or known
35969 <para>Unknown select this if none of the other choices are
35974 <para>Irregular: The journal is not "regular" but has a
35975 periodicity. You know that it comes out on January, then in
35976 October and December, it is irregular, but you know when it's
35977 going to arrive.</para>
35981 <para>2/day: Twice daily</para>
35985 <para>1/day: Daily</para>
35989 <para>3/week: Three times a week</para>
35993 <para>1/week: Weekly</para>
35997 <para>1/ 2 weeks: Twice monthly (fortnightly)</para>
36001 <para>1/ 3 weeks: Tri-weekly</para>
36005 <para>1/month: Monthly</para>
36009 <para>1/ 2 months (6/year): Bi-monthly</para>
36013 <para>1/ 3 months (1/quarter): Quarterly</para>
36017 <para>1/quarter (seasonal) : Quarterly related to seasons (ie.
36018 Summer, Autumn, Winter, Spring)</para>
36022 <para>2/year: Half yearly</para>
36026 <para>1/year: Annual</para>
36030 <para>1/ 2 years: Bi-annual</para>
36035 <para>'Subscription length' is the number of issues or months in the subscription. This is
36036 also used for setting up renewal alerts</para>
36039 <para>'Subscription start date' is the date at which the subscription begins. This is used
36040 for setting up renewal alerts</para>
36043 <para>'Subscription end date' should only be entered for subscriptions that have ended (if
36044 you're entering in a backlog of serials)</para>
36048 <para>'Numbering pattern' will help you determine how the numbers are printed for each
36049 issue. Patterns entered here are saved and editable at any time by visiting '<link linkend="serialpatterns">Manage numbering patterns</link>'</para>
36053 <para>Start with the numbering on the issue you have in hand,
36054 the numbering that matches the date you entered in the 'First
36055 issue publication' field</para>
36059 <para>You can choose to create your own numbering pattern by choosing 'None of the
36060 above' and clicking the 'Show/Hide Advanced Pattern' button at the bottom of the form</para>
36062 <screeninfo>Advanced prediction pattern</screeninfo>
36065 <imagedata fileref="images/serials/advancedpattern.png"/>
36073 <para>The 'Locale' option is useful when you want to display days, month or season. For
36074 example, if you have a German serial, you can use the German locale option to display
36075 days, etc. in German.</para>
36079 <para>Once a 'Numbering pattern' is chosen the number formula will appear.<screenshot>
36080 <screeninfo>Numbering Forumla</screeninfo>
36083 <imagedata fileref="images/serials/numberonly.png"/>
36086 </screenshot><itemizedlist>
36088 <para>The 'Begins with' number is the number of the issue you're holding in your
36092 <para>The 'Inner counter' is used to tell Koha where the "receiving cycle" starts<itemizedlist>
36094 <para>For example: If the first issue to receive is "vol. 4, no. 1, iss. 796",
36095 you need to set up "inner counter = 0" But if it's "vol. 4, no. 2, iss.
36096 797", the inner counter should be "1".</para>
36098 </itemizedlist></para>
36101 <para>After filling in this data click the 'Test prediction pattern' button to see
36102 what issues the system will generate, if there are irregularities you can choose
36103 which issues don't exist from the list presented.</para>
36105 <screeninfo>Prediction pattern</screeninfo>
36108 <imagedata fileref="images/serials/predictionpattern.png"/>
36113 </itemizedlist></para>
36116 <para>If you have added a <link linkend="serialfields">custom subscription field</link>,
36117 it will be editable above the buttons at the bottom of the screen<screenshot>
36118 <screeninfo>Show field</screeninfo>
36121 <imagedata fileref="images/serials/addingfieldvalues.png"/>
36124 </screenshot></para>
36128 <para>Click 'Save Subscription' to save the information you have
36129 entered. <link linkend="sampleserialsapp">Find sample serial examples in
36130 the appendix</link>.</para>
36133 <section id="receiveissues">
36134 <title><link linkend="receiveissues">Receive Issues</link></title>
36136 <para>Issues can be marked as received from several locations. To find a
36137 subscription, use the search box at the top of the Serials page to
36138 search for the serial you'd like to receive issues for:</para>
36141 <screeninfo>Subscription Search</screeninfo>
36145 <imagedata fileref="images/serials/subsearch.png"/>
36150 <para>From the search results you can click the 'Serial Receive' link or
36151 you can click on the subscription title and then click the 'Receive'
36155 <screeninfo>Subscription Buttons</screeninfo>
36159 <imagedata fileref="images/serials/subbuttons.png"/>
36164 <para>The final way to receive serials is from the 'Serial Collection'
36165 page. To the left of the Subscription summary page there is a menu with
36166 a link to 'Serial Collection'</para>
36169 <screeninfo>Serial Subscription Menu</screeninfo>
36173 <imagedata fileref="images/serials/serialcolllink.png"/>
36178 <para>From the page that opens up you can click 'Edit Serial' with the
36179 issue you want to receive checked.</para>
36182 <screeninfo>Edit Issues</screeninfo>
36186 <imagedata fileref="images/serials/editissue.png"/>
36191 <para>All three of these options will open up the issue receive
36195 <screeninfo>Receive Serials</screeninfo>
36199 <imagedata fileref="images/serials/receiveissue.png"/>
36206 <para>Choose 'Arrived' from the status pull down to mark a serial as
36211 <para>If you have decided to have an item record created for each issue an <link linkend="addingitems">item add form</link>
36212 will appear after choosing 'Arrived'</para>
36214 <screeninfo>Serial item record</screeninfo>
36217 <imagedata fileref="images/serials/serialitem.png"/>
36224 <para>If your issue has a supplemental issue with it, fill in the Supplemental Issue information.<itemizedlist>
36226 <para>Key the entire numbering in the box after "Supplemental issue" no numbering
36227 will be inherited/auto-filled from the main issue, and exactly what you key in the
36228 box after "Supplemental issue" will be auto-filled in the item record's Serial
36229 enumeration/chronology [MARC21 952$h] (if you create item records). <itemizedlist>
36231 <para>E.g., key this in its entirety if it's what you would like displayed:
36232 "v.69 no.3 (Mar. 2015) suppl." </para>
36234 </itemizedlist></para>
36236 </itemizedlist></para>
36240 <para>If you have decided to have an item record created for each
36241 issue an <link linkend="addingitems">item add form</link> will
36242 appear for your supplement and for the issue itself</para>
36246 <para>Once you have entered your info you can click 'Save'</para>
36250 <para>If you are receiving multiple issues at once, or have marked an
36251 issue as 'Late' or 'Missing' there you can click the 'Generate Next'
36252 button below the list of issues.</para>
36255 <screeninfo>Generate Next Button</screeninfo>
36259 <imagedata fileref="images/serials/editissue.png"/>
36264 <para>Clicking this button will generate the next issue for you and mark
36265 the previously expected issue as 'Late' automatically. You can then
36266 check the 'Edit' box to the right of each issue and edit the status on
36267 multiple issues at once.</para>
36270 <section id="routinglist">
36271 <title><link linkend="routinglist">Create a Routing List</link></title>
36273 <para>A routing list is a list of people who receive the serial before it goes to the shelf.
36274 To enable routing lists you want to set your <link linkend="RoutingSerials">RoutingSerials</link> preference to 'Add'.</para>
36276 <para>When on the subscription page you will see a link to the left that
36277 reads 'Create Routing List' or 'Edit Routing List'</para>
36280 <screeninfo>Subscription Routing List Link</screeninfo>
36284 <imagedata fileref="images/serials/createroutinglink.png"/>
36289 <para>Clicking that link will bring you to the menu to add a new routing
36293 <screeninfo>Routing List Creation</screeninfo>
36297 <imagedata fileref="images/serials/createroutinglist.png"/>
36302 <para>From here you want to click 'Add recipients' in order to add
36303 people to the routing list. In the menu that appears you can filter
36304 patrons by part of their name, their library and/or patron
36308 <screeninfo>Add Members to Routing List</screeninfo>
36312 <imagedata fileref="images/serials/addtorouting.png"/>
36317 <para>Clicking 'Add' to the right of each name will add them to the
36318 routing list. When you have chosen all of the people for the list, click
36319 the 'Close' link to be redirected to the routing list.</para>
36322 <screeninfo>Routing List</screeninfo>
36326 <imagedata fileref="images/serials/editroutinglist.png"/>
36331 <para>If the list looks the way you expect it to, then click 'Save'.
36332 Next you will be brought to a preview of the routing list. To print the
36333 list click 'Save and preview routing slip.' This will open a printable
36334 version of the list.</para>
36337 <screeninfo>Preview Routing List</screeninfo>
36341 <imagedata fileref="images/serials/previewroutinglist.png"/>
36346 <para>If <link linkend="RoutingListAddReserves">RoutingListAddReserves</link> is set to
36347 on then patrons listed in the routing list will automatically be added
36348 to the holds list for the issue.</para>
36350 <para>To see a list of all of the routing lists a specific patron is on visit the <link linkend="patronroutingtab">Routing Lists tab</link> on their patron record.</para>
36353 <section id="serialsubinstaff">
36354 <title><link linkend="serialsubinstaff">Subscriptions in Staff Client</link></title>
36356 <para>Subscription information will appear on bibliographic records
36357 under the 'Subscriptions' tab</para>
36360 <screeninfo>Subscription Tab on Bibliographic Record</screeninfo>
36364 <imagedata fileref="images/serials/subinfoonbib.png"/>
36369 <para>Clicking the 'Subscription Details' link will take you to the
36370 Subscription summary page in the staff client.</para>
36373 <screeninfo>Subscription Detail</screeninfo>
36377 <imagedata fileref="images/serials/subscriptiondetail.png"/>
36381 <para>If you are using the <link linkend="acqmodule">Acquisitions</link> module to keep <link linkend="ordersubscription">track of serial subscriptions</link> you will see that info
36382 before your subscription details.</para>
36384 <screeninfo>Acquisitions information for subscription</screeninfo>
36387 <imagedata fileref="images/acquisitions/subdetails.png"/>
36393 <section id="serialsubinopac">
36394 <title><link linkend="serialsubinopac">Subscriptions in OPAC</link></title>
36396 <para>When viewing the subscription in the OPAC there will be several
36399 <para>Like in the staff client, there will be a Subscriptions tab on the
36400 bibliographic record.</para>
36403 <screeninfo>Subscriptions Tab in OPAC</screeninfo>
36407 <imagedata fileref="images/serials/subopac.png"/>
36412 <para>Under this tab will appear the number of issues you chose when
36413 setting up the subscription or in your <link linkend="OPACSerialIssueDisplayCount">OPACSerialIssueDisplayCount</link>
36414 system preference. Clicking the 'More details' link will provide you
36415 with additional information about the serial history. You can set the
36416 default view of a serial in the OPAC with the <link linkend="SubscriptionHistory">SubscriptionHistory</link> system
36419 <para>There are two views, compact and full. The compact serial
36420 subscription will show basic information regarding the
36421 subscription</para>
36424 <screeninfo>Compact Serial View</screeninfo>
36428 <imagedata fileref="images/serials/compactopac.png"/>
36433 <para>From this compact display patrons can subscribe to be notified of new issues as they are
36434 released by clicking the 'Subscribe to email notifications of new issues' button. For this
36435 link to appear you will want to have chosen to notify patrons <link linkend="newsubscription">on the subscription</link> itself.</para>
36438 <screeninfo>Subscribe link in the OPAC</screeninfo>
36442 <imagedata fileref="images/serials/opacroutingsubscribe.png"/>
36446 <para>You can see thos who subscribe to new issue alerts by going to the subscription page in
36447 the staff client and looking on the right of the 'Information' tab.<screenshot>
36448 <screeninfo>Serial notification subscribers</screeninfo>
36451 <imagedata fileref="images/serials/subscribers.png"/>
36454 </screenshot></para>
36456 <para>Whereas the full view shows extensive details, broken out by year,
36457 regarding the subscription</para>
36460 <screeninfo>Full Serial View</screeninfo>
36464 <imagedata fileref="images/serials/fullopac.png"/>
36470 <section id="serialclaims">
36471 <title><link linkend="serialclaims">Claim Late Serials</link></title>
36473 <para>Koha can send email messages to your serial vendors if you have
36474 late issues. To the left of the main serials page there is a link to
36478 <screeninfo>Link to Claims on Serials Menu</screeninfo>
36482 <imagedata fileref="images/serials/serialclaimmenu.png"/>
36487 <para>The links to claims also appears to the left of the subscription
36491 <screeninfo>Link to Claims on the Serials Menu</screeninfo>
36495 <imagedata fileref="images/serials/serialclaimmenu1.png"/>
36500 <para>If you don't have a claim notice defined yet you will see a
36501 warning message that you need to first define a notice.</para>
36504 <screeninfo>Missing Claims Notice Warning</screeninfo>
36508 <imagedata fileref="images/serials/noserialclaim.png"/>
36513 <para>Clicking 'Claims' will open a report that will ask you to choose
36514 from your various serial vendors to generate claims for late
36518 <screeninfo>Serial Claims</screeninfo>
36522 <imagedata fileref="images/serials/serialclaims.png"/>
36527 <para>From the list of late issues you can choose which ones you want to
36528 send a claim email to by clicking the checkbox to the left of late
36529 issue, choosing the notice template to use and clicking the 'Send
36530 notification' button.</para>
36533 <section id="serialexpiration">
36534 <title><link linkend="serialexpiration">Check Serial Expiration</link></title>
36536 <para>When adding serials you enter a subscription length, using the
36537 check expiration tool you can see when your subscriptions are about to
36538 expire. To use the tool click the link to 'Check expiration' on the
36539 serials menu.</para>
36542 <screeninfo>Check Serial Expiration</screeninfo>
36546 <imagedata fileref="images/serials/serialexpiresearch.png"/>
36551 <para>In the form that appears you need to enter at least a date to
36554 <para>In your results you will see all subscriptions that will expire
36555 before the date you entered. From there you can choose to view the
36556 subscription further or renew it in one click.</para>
36559 <screeninfo>Serial Expiration Search Results</screeninfo>
36563 <imagedata fileref="images/serials/serialexpire.png"/>
36569 <section id="serialrenew">
36570 <title><link linkend="serialrenew">Renewing Serials</link></title>
36572 <para>If your serial subscription has expired you won't be able to
36573 receive issues. To renew your subscription you can click the 'Renew'
36574 button at the top of your subscription detail page.</para>
36577 <screeninfo>Renew option on subscription detail</screeninfo>
36581 <imagedata fileref="images/serials/renewsubscription.png"/>
36586 <para>Another option is to click the 'Renew' link to the right of the
36587 subscription on the Serial Collection page.</para>
36590 <screeninfo>Renew option on serial collection</screeninfo>
36594 <imagedata fileref="images/serials/collectionrenew.png"/>
36599 <para>Once you click the 'Renew' link or button you will be presenting
36600 with renewal options.</para>
36603 <screeninfo>Subscription renewal form</screeninfo>
36607 <imagedata fileref="images/serials/serialrenew.png"/>
36614 <para>The start date should be the date your subscription period
36619 <para>For the subscription length you'll want to fill in one of the
36620 three fields presented: Number of num (issues), Number of months or
36621 Number of weeks.</para>
36625 <para>Finally enter any notes you might have about this
36631 <section id="serialsearch">
36632 <title><link linkend="serialsearch">Searching Serials</link></title>
36634 <para>Once in the Serials module there is basic search box at the top
36635 that you can use to find subscriptions using any part of the ISSN and/or
36639 <screeninfo>Basic Serials Search</screeninfo>
36643 <imagedata fileref="images/serials/serialsearch.png"/>
36648 <para>You can also click the 'Advanced Search' link to the right of the
36649 'Submit' button to do a more thorough search of your serials.</para>
36652 <screeninfo>Advanced Serials Search</screeninfo>
36656 <imagedata fileref="images/serials/advanceserialsearch.png"/>
36661 <para>From your results you can filter by using the search boxes at the
36662 bottom of each column and adjust the number of resutls using the toolbar
36663 at the top of the results set.</para>
36666 <screeninfo>Serial Search Results</screeninfo>
36670 <imagedata fileref="images/serials/serialsearchresults.png"/>
36677 <chapter id="acqmodule">
36678 <title>Acquisitions</title>
36680 <para>The Koha Acquisitions module provides a way for the library to
36681 record orders placed with vendors and manage purchase budgets.</para>
36685 <para><emphasis>Get there:</emphasis> More > Acquisitions</para>
36689 <section id="acqsetup">
36690 <title><link linkend="acqsetup">Setup</link></title>
36692 <para>Before using the Acquisitions Module you will want to make sure
36693 that you have completed all of the set up.</para>
36695 <para>First, set your <link linkend="acqprefs">Acquisitions System Preferences</link> and
36696 <link linkend="acqadmin">Acquisitions Administration</link> to match your library's
36697 workflow. Before setting your <link linkend="ediaccounts">EDI Accounts</link> and <link
36698 linkend="libraryeans">Library EANs</link> you will need to have <link
36699 linkend="addacqvendor">entered your vendors</link>.</para>
36701 <para>On the main acquisitions page you will see your library's funds
36705 <screeninfo>Acquisitions Funds Summary</screeninfo>
36709 <imagedata fileref="images/acquisitions/acqfunds.png"/>
36715 <para>If the total line is confusing for the funds you have set up
36716 you can hide it by adding <programlisting>#funds_total {display:none;}</programlisting></para>
36718 <para>to the <link linkend="IntranetUserCSS">IntranetUserCSS</link>
36722 <para>To see all active funds you can click the checkbox next to 'Show active and inactive'
36723 above the funds table.</para>
36725 <para>To see a history of all orders in a fund you can click on the
36726 linked amount and it will run a search for you.</para>
36729 <screeninfo>Breakdown of orders against the FIC Fund</screeninfo>
36733 <imagedata fileref="images/acquisitions/fundbreakdown.png"/>
36738 <para>Learn more in the <link linkend="fundtracking">Budget/Fund
36739 Tracking</link> section of this manual.</para>
36742 <section id="acqvendors">
36743 <title><link linkend="acqvendors">Vendors</link></title>
36745 <para>Before any orders can be places you must first enter at least one
36748 <section id="addacqvendor">
36749 <title><link linkend="addacqvendor">Add a Vendor</link></title>
36751 <para>To add a vendor click the 'New Vendor' button on the
36752 Acquisitions page</para>
36755 <screeninfo>New Vendor Button on Acquisitions</screeninfo>
36759 <imagedata fileref="images/acquisitions/newvendbutton.png"/>
36764 <para>The vendor add form is broken into three pieces</para>
36768 <para>The first section is for basic information about the
36772 <screeninfo>Basic Vendor Information</screeninfo>
36776 <imagedata fileref="images/acquisitions/newvendor1.png"/>
36783 <para>Of these fields, only the Vendor name is required, the
36784 rest of the information should be added to help with
36785 generating claim letters and invoices</para>
36791 <para>The second section is for information regarding your contact
36792 at the Vendor's office</para>
36795 <screeninfo>Vendor Contact Details</screeninfo>
36799 <imagedata fileref="images/acquisitions/newvendor2.png"/>
36806 <para>None of these fields are required, they should only be
36807 entered if you want to keep track of your contact's
36808 information within Koha</para>
36814 <para>The final section is for billing information</para>
36817 <screeninfo>Vendor Ordering/Billing Information</screeninfo>
36821 <imagedata fileref="images/acquisitions/newvendor3.png"/>
36828 <para>To be able to order from a vendor you must make them
36833 <para>For List Prices and Invoice Prices choose the
36838 <para>Currencies are assigned in the <link linkend="currexchangeadmin">Currencies & Exchange
36839 Rates</link> admin area</para>
36845 <para>If your library is charged tax mark your Tax Number as
36850 <para>Note if you list prices and/or invoice prices include
36855 <para>If the vendor offers a consistent blank discount, enter
36856 that in the 'Discount' field</para>
36860 <para>You can enter item specific discounts when placing
36867 <para>Enter your tax rate if your library is charged taxes on
36872 <para>If you know about how long it usually takes orders to
36873 arrive from this vendor you can enter a delivery time. This
36874 will allow Koha to estimate when orders will arrive at your
36875 library on the late orders report.</para>
36879 <para>Notes are for internal use</para>
36886 <section id="editacqvendor">
36887 <title><link linkend="editacqvendor">View/Edit a Vendor</link></title>
36889 <para>To view a vendor's information page you must search for the
36890 vendor from the Acquisitions home page. Your search can be for any
36891 part of the Vendor's name:</para>
36894 <screeninfo>Vendor Search Results</screeninfo>
36898 <imagedata fileref="images/acquisitions/vendorsearch.png"/>
36903 <para>From the results, click on the name of the vendor you want to
36904 view or edit</para>
36907 <screeninfo>Vendor Information Page</screeninfo>
36911 <imagedata fileref="images/acquisitions/vendorpage.png"/>
36916 <para>To make changes to the vendor, simply click the 'Edit vendor' button.</para>
36918 <para>If the vendor has no baskets attached to it then a 'Delete vendor' button will also be
36919 visible and the vendor can be deleted. Otherwise you will see a 'Receive shipment'
36923 <screeninfo>Receive shipment button</screeninfo>
36927 <imagedata fileref="images/acquisitions/receivebutton.png"/>
36933 <section id="vendorcontracts">
36934 <title><link linkend="vendorcontracts">Vendor Contracts</link></title>
36936 <para>You can define contracts (with a start and end date) and attach
36937 them to a vendor. This is used so that at the end of the year you can
36938 see how much you spent on a specific contract with a vendor. In some
36939 places, contracts are set up with a minimum and maximum yearly
36942 <section id="addvendorcontract">
36943 <title><link linkend="addvendorcontract">Add a Contract</link></title>
36945 <para>At the top of a Vendor Information Page, you will see a 'New
36946 Contract' button.</para>
36949 <screeninfo>New Contract Button</screeninfo>
36953 <imagedata fileref="images/acquisitions/newcontract.png"/>
36958 <para>The contract form will ask for some very basic information
36959 about the contract</para>
36962 <screeninfo>New Contract Form</screeninfo>
36966 <imagedata fileref="images/acquisitions/newcontractform.png"/>
36972 <para>You cannot enter a contract retrospectively. The end date
36973 must not be before today's date.</para>
36976 <para>Once the contract is saved it will appear below the vendor
36977 information.</para>
36980 <screeninfo>Vendor with contracts</screeninfo>
36984 <imagedata fileref="images/acquisitions/contractdisplay.png"/>
36989 <para>It will also be an option when creating a basket</para>
36992 <screeninfo>Contract Pull Down on New Basket Form</screeninfo>
36996 <imagedata fileref="images/acquisitions/contractonbasket.png"/>
37004 <section id="managesuggest">
37005 <title><link linkend="managesuggest">Managing Suggestions</link></title>
37007 <para>Purchase suggestions can be generated in one of two ways. You can create suggestions via
37008 the staff client either for the library or <link linkend="patronsuggestions">on the patron's
37009 behalf</link> from their record. Depending on your settings in the <link linkend="suggestionspref">suggestion</link> system preference, patrons may also be able to
37010 make purchase suggestions via the OPAC. When a suggestion is waiting for library review, it
37011 will appear on the Acquisitions home page under the vendor search.</para>
37014 <screeninfo>Pending suggestions on Acquisitions</screeninfo>
37018 <imagedata fileref="images/acquisitions/suggestonacq.png"/>
37023 <para>It will also appear on the main staff dashboard under the module
37027 <screeninfo>Pending suggestions on main page</screeninfo>
37031 <imagedata fileref="images/acquisitions/pendingsuggestions.png"/>
37036 <para>Clicking 'Manage suggestions' will take you to the suggestion
37037 management tool. If there are no pending suggestions you can access the
37038 suggestion management tool by clicking the 'Manage suggestions' link on
37039 the menu on the left of the Acquisitions page.</para>
37042 <screeninfo>Suggestion Management</screeninfo>
37046 <imagedata fileref="images/acquisitions/suggestmanage.png"/>
37051 <para>Your suggestions will be sorted into several tabs: Accepted,
37052 Pending, Checked, Ordered and/or Rejected. Each accepted or rejected
37053 suggestion will show the name of the librarian who managed the
37054 suggestion and the reason they gave for accepting or rejecting it (found
37055 under 'Status').</para>
37056 <para>An 'Accepted' suggestion is one that you have marked as 'Accepted' using the form below
37057 the suggestions. A 'Pending' suggestion is one that is awaiting action from the library. A
37058 'Checked' suggestion is one that has been marked as 'Checked' using the form before the
37059 suggestions. An 'Ordered' suggestion is on that has been ordered using the '<link linkend="orderfromsuggestion">From a purchase suggestion</link>' link in your basket. A
37060 'Rejected' suggestion is one that you have marked at 'Rejected' using the form below the
37061 list of suggestions.</para>
37063 <para>For libraries with lots of suggestions, there are filters on the
37064 left hand side of the Manage Suggestions page to assist in limiting the
37065 number of titles displayed on the screen.</para>
37068 <screeninfo>Suggestion Filtering</screeninfo>
37072 <imagedata fileref="images/acquisitions/suggestionsfilters.png"/>
37077 <para>Clicking on the blue headings will expand the filtering options
37078 and clicking '[clear]' will clear all filters and show all
37080 <para>The suggestions page will automatically be limited to
37081 suggestions for your library. To see information for all (or any
37082 other) libraries click on the 'Acquisition information' filter and
37083 change the library.</para>
37086 <screeninfo>Branch filter</screeninfo>
37090 <imagedata fileref="images/acquisitions/suggestbranchfilter.png"/>
37096 <para>When reviewing 'Pending' suggestions you can choose to check the
37097 box next to the item(s) you want to approve/reject and then choose the
37098 status and reason for your selection. You can also choose to completely
37099 delete the suggestion by checking the 'Delete selected' box.</para>
37102 <screeninfo>Pending Suggestions</screeninfo>
37106 <imagedata fileref="images/acquisitions/suggestpending.png"/>
37111 <para>Another option for libraries with long lists of suggestions is to
37112 approve or reject suggestions one by one by clicking on the title of the
37113 suggestion to open a summary of the suggestion, including information if
37114 the item was purchased.</para>
37117 <screeninfo>Suggestion Information</screeninfo>
37121 <imagedata fileref="images/acquisitions/suggestiondetails.png"/>
37126 <para>Clicking 'edit' to the right of the suggested title or at the to pof the suggestion
37127 detail page will open a suggestion editing page.</para>
37130 <screeninfo>Edit Purchase Suggestion</screeninfo>
37134 <imagedata fileref="images/acquisitions/editsuggestion.png"/>
37139 <para>From this form you can make edits to the suggestion (adding more
37140 details or updating incorrect information provided by the patron). You
37141 can also choose to accept or reject the suggestion on an individual
37146 <para>Choosing to mark a request as 'Pending' will move the request
37147 back to the 'Pending' tab.</para>
37151 <para>Reasons for accepting and rejecting suggestions are defined by the
37152 <link linkend="suggestauthorized">SUGGEST</link> authorized
37156 <screeninfo>Reasons for approving or rejecting
37157 suggestions</screeninfo>
37161 <imagedata fileref="images/acquisitions/suggestreasons.png"/>
37166 <para>If you choose 'Others...' as your reason you will be prompted to
37167 enter your reason in a text box. Clicking 'Cancel' to the right of the
37168 box will bring back the pull down menu with authorized reasons.</para>
37171 <screeninfo>Enter reason for 'Others...'</screeninfo>
37175 <imagedata fileref="images/acquisitions/suggestothers.png"/>
37179 <para>You can also assign this suggestion to a fund. <screenshot>
37180 <screeninfo>Edit suggestion fund</screeninfo>
37183 <imagedata fileref="images/acquisitions/suggestfund.png"/>
37186 </screenshot></para>
37187 <para>This edit can trigger a notice (defined in the <link linkend="notices">Notices &
37188 Slips</link> tool with the <link linkend="toprocessnotice">TO_PROCESS</link> notice) to
37189 the fund owner that there is a suggestion ready for them to manage if you have turned on the
37190 <link linkend="emailsuggestfund">cron job to generate these notices</link>.</para>
37192 <para>Once you have clicked 'Submit' the suggestion will be moved to the
37193 matching tab. The status will also be updated on the patron's account in
37194 the OPAC and an <link linkend="notices">email notice</link> will be sent
37195 to the patron using the template that matches the status you have
37199 <screeninfo>Purchase suggestions in the OPAC</screeninfo>
37203 <imagedata fileref="images/acquisitions/mysuggestions.png"/>
37209 <section id="placingacqorder">
37210 <title><link linkend="placingacqorder">Placing Orders</link></title>
37212 <para>To place an order you must first search for the vendor or bookseller you want to send
37213 the order to. <important>
37214 <para>If you are planning on using EDIFACT to submit your order you will need to first set
37215 up your library's <link linkend="ediaccounts">EDI Accounts</link> and <link
37216 linkend="libraryeans">EANs</link>.</para>
37217 </important></para>
37219 <section id="createacqbasket">
37220 <title><link linkend="createacqbasket">Create a basket</link></title>
37223 <para>If you're using EDI for ordering you will want to download your order record from
37224 your vendor before starting the process in Koha.</para>
37228 <para>To create a basket you must first search for the vendor you're
37229 ordering from:</para>
37232 <screeninfo>New Basket / Add Basket Options</screeninfo>
37236 <imagedata fileref="images/acquisitions/addbasketbutton.png"/>
37241 <para>And click the 'New basket' button to the right of the vendor name.<note>
37242 <para>You can also add to an existing basket by clicking the 'Add to basket' link to the
37243 far right of each basket's information in the results table. </para>
37245 <para>After clicking 'New basket' you will be asked to enter some information about the
37249 <screeninfo>Add Basket Form</screeninfo>
37253 <imagedata fileref="images/acquisitions/addbasket.png"/>
37260 <para>When adding a basket you want to give it a name that will
37261 help you identify it later</para>
37265 <para>Enter in the Billing Place and Delivery Place (this will
37266 default the library you're logged in at)</para>
37270 <para>If you would like to change the vendor you're ordering from
37271 you can use the Vendor pull down menu</para>
37275 <para>The notes fields are optional and can contain any type of
37280 <para>If you have <link linkend="addvendorcontract">added
37281 contracts</link> to the vendor you're ordering from, you will also
37282 have an option to choose which contract you're ordering these items
37286 <screeninfo>Basket with contract options</screeninfo>
37290 <imagedata fileref="images/acquisitions/basketwithcontracts.png"/>
37295 <para>When finished, click 'Save'</para>
37298 <screeninfo>New Empty Basket</screeninfo>
37302 <imagedata fileref="images/acquisitions/basket.png"/>
37307 <para>Once your basket is created you are presented with several
37308 options for adding items to the order.</para>
37312 <para>If you are ordering another copy of an existing item, you
37313 can simply search for the record in your system.</para>
37316 <screeninfo>Search for existing records</screeninfo>
37320 <imagedata fileref="images/acquisitions/orderfromexisting.png"/>
37327 <para>From the results, simply click 'Order' to be brought to
37328 the order form.</para>
37331 <screeninfo>Order form</screeninfo>
37335 <imagedata fileref="images/acquisitions/existingitemorder.png"/>
37342 <para>All of the details associated with the item will already be listed under
37343 'Catalog details.'</para>
37350 <listitem id="orderfromsuggestion">
37351 <para>If you allow patrons to make purchase suggestions (learn more in the <link linkend="managesuggest">Managing Suggestions</link> section of this manual), then
37352 you can place orders from those suggestions. In order to keep track of suggestions
37353 that have been ordered and received you must place the order using this link. </para>
37355 <screeninfo>Approved Suggestions to Order From</screeninfo>
37358 <imagedata fileref="images/acquisitions/orderfromsuggest.png"/>
37364 <para>From the results, click 'Order' next to the item you want to order and you
37365 will be presented with the order form including a link to the suggestion</para>
37367 <screeninfo>Order from a Suggestion</screeninfo>
37370 <imagedata fileref="images/acquisitions/orderfromsuggestform.png"/>
37376 <para>From this form you can make changes to the Catalog Details if
37380 <para>When the item appears in your basket it will include a link to the
37383 <screeninfo>Suggestion Link in basket</screeninfo>
37386 <imagedata fileref="images/acquisitions/ordersuggestlink.png"/>
37394 <para>Orders added to the basket in this way will notify the patron via email that
37395 their suggestion has been ordered and will update the patron's '<link linkend="opacmysuggestions">My purchase suggestions</link>' page in the
37400 <listitem id="ordersubscription">
37401 <para>If you're using the <link linkend="serials">Serials</link> module you can link
37402 your subscription order information to acquisitions by choosing to order 'From a subscription'<itemizedlist>
37404 <para>After clicking the order link you will be brought to a search page that will
37405 help you find your subscription</para>
37407 <screeninfo>Subscription order search</screeninfo>
37410 <imagedata fileref="images/acquisitions/subordersearch.png"/>
37416 <para>Your results will appear to the right of the form and each subscription will
37417 have an 'Order' link to the right</para>
37419 <screeninfo>Subscription results</screeninfo>
37422 <imagedata fileref="images/acquisitions/suborderresults.png"/>
37428 <para>Clicking 'Order' will bring the subscription info in to the order form
37429 without an 'Add item' section since you are just ordering a subscription and an
37430 item isn't needed</para>
37432 <screeninfo>Order from subscription</screeninfo>
37435 <imagedata fileref="images/acquisitions/suborder.png"/>
37440 </itemizedlist></para>
37444 <para>To order from a record that can't be found anywhere else,
37445 choose the 'From a new (empty) record.'</para>
37448 <screeninfo>Order a new record</screeninfo>
37452 <imagedata fileref="images/acquisitions/fromnewemptyrecord.png"/>
37459 <para>You will be presented with an empty form to fill in all
37460 of the necessary details about the item you are
37467 <para>If you want to search other libraries for an item to
37468 purchase, you can use the 'From an external source' option that
37469 will allow you to order from a MARC record found via a Z39.50
37473 <screeninfo>Search for record to add</screeninfo>
37477 <imagedata fileref="images/acquisitions/orderz39.png"/>
37484 <para>From the results, click the Order link next to the item
37485 you want to purchase.</para>
37488 <screeninfo>Search Results to Order From</screeninfo>
37492 <imagedata fileref="images/acquisitions/orderz39results.png"/>
37499 <para>If the item you're ordering from an external source
37500 looks like it might be a duplicate, Koha will warn you and
37501 give you options on how to proceed.</para>
37504 <screeninfo>Duplicate order warning</screeninfo>
37508 <imagedata fileref="images/acquisitions/dupwarning.png"/>
37515 <para>From the warning, you can choose to order another
37516 copy on the existing bib record, create a new bib record,
37517 or cancel your order of this item.</para>
37523 <para>In the order form that pops up, you will not be able to
37524 edit the catalog details.</para>
37527 <screeninfo>New order from Z39.50 Search</screeninfo>
37531 <imagedata fileref="images/acquisitions/orderz39form.png"/>
37539 <listitem id="orderfromstagedfile">
37540 <para>The next option for ordering is to order from a staged record (<link
37541 linkend="stagemarc">learn more about staging records</link>). <note>
37542 <para>This is the option you will choose if you have an order file from your
37546 <screeninfo>Staged Files to Order From</screeninfo>
37549 <imagedata fileref="images/acquisitions/stagedfiles.png"/>
37555 <para>From the list of files you are presented with, choose the 'Add orders' link to
37556 add the records in the staged file to your order. <screenshot>
37557 <screeninfo>Staged records</screeninfo>
37560 <imagedata fileref="images/acquisitions/importallstaged.png"/>
37563 </screenshot></para>
37566 <para>Next to each title is a checkbox, check the items you would like to order, or
37567 choose 'Check all' at the top. Depending on your settings in the <link linkend="MarcFieldsToOrder">MarcFieldsToOrder</link> preference Koha will
37568 populate the next screen with with the relevant Quantity, Price, Fund, Statistic
37569 1, and Statistic 2 found within the staged file.<screenshot>
37570 <screeninfo>Add orders from staged file</screeninfo>
37573 <imagedata fileref="images/acquisitions/selecttoimport.png"/>
37576 </screenshot></para>
37579 <para>In the 'Item Information' tab you can enter information that will be added to
37580 every ordered item such as item type, collection code and not for loan status.<screenshot>
37581 <screeninfo>Item information</screeninfo>
37584 <imagedata fileref="images/acquisitions/itemfromstaged.png"/>
37587 </screenshot></para>
37590 <para>If no information is imported from the MARC record regarding fund information
37591 the 'Default accounting details' tab can be used to apply values related to the accounting.<screenshot>
37592 <screeninfo>Accounting details</screeninfo>
37595 <imagedata fileref="images/acquisitions/stagedaccounting.png"/>
37598 </screenshot></para>
37603 <para>The final option for ordering is to order from a list of titles with the highest
37604 hold ratios<itemizedlist>
37606 <para>This option will take you to the Holds Ratio report where you can find items
37607 with a high hold ratio and order additional copies. Next to each title will be
37608 a link with the number of items to order, click that and it will add the item to
37609 your basket.<screenshot>
37610 <screeninfo>Holds Ratio Order</screeninfo>
37613 <imagedata fileref="images/acquisitions/highestholdratio.png"/>
37616 </screenshot></para>
37618 </itemizedlist></para>
37621 <para>With any of the above ordering options you're presented with an option to notify
37622 patrons of the new item when it's received. The contents of that notification can be
37623 edited in the <link linkend="notices">Notices & Slips</link> tool and will have the
37624 code of ACQ_NOTIF_ON_RECEIV. In the 'Patrons' section you will see an option to 'Add
37625 user'. Click that button to add patrons who will be notified of the new issue. </para>
37628 <screeninfo>Patron notification search</screeninfo>
37631 <imagedata fileref="images/acquisitions/patronstonotify.png"/>
37637 <para>In the window that pops up search for the patrons you'd like to notify and
37638 click 'Select'</para>
37641 <para>Once you're done you can close the window and you'll see the list of patrons
37642 under the 'Patrons' section<screenshot>
37643 <screeninfo>Patrons</screeninfo>
37646 <imagedata fileref="images/acquisitions/patronslist.png"/>
37649 </screenshot></para>
37654 <para>After bringing in the bib information (for all import methods except for the staged
37655 file), if your <link linkend="AcqCreateItem">AcqCreateItem</link> system preference is set
37656 to add an item when ordering you will enter the item info next. You need to fill out at
37657 least one item record and then click the 'Add' button at the bottom left of the item
37661 <screeninfo>Item order</screeninfo>
37665 <imagedata fileref="images/acquisitions/itemonorder.png"/>
37670 <para>After clicking the 'Add item' button below the item record the item will appear above
37671 the form and then you can enter your next item the same way (if ordering more than one
37675 <screeninfo>Item ordered</screeninfo>
37679 <imagedata fileref="images/acquisitions/itemonorderadded.png"/>
37684 <para>Once you have entered the info about the item, you need to enter
37685 the Accounting information.</para>
37688 <screeninfo>Accounting Details</screeninfo>
37692 <imagedata fileref="images/acquisitions/accounting.png"/>
37699 <para>Quantity is populated by the number of items you've added to the order above.<itemizedlist>
37702 <para>You cannot edit the quantity manually, you must click 'Add' below the item
37703 form to add as many items as you're ordering.</para>
37706 </itemizedlist></para>
37710 <para>The list of funds is populated by the <link linkend="funds">funds</link> you have assigned in the Acquisitions
37711 Administration area.</para>
37715 <para>The currency pull down will have the <link linkend="currexchangeadmin">currencies</link> you set up in the
37716 <link linkend="acqadmin">Acquisitions Administration</link>
37721 <para>The vendor price is the price before any taxes or discounts
37722 are applied.</para>
37726 <para>If the price is uncertain, check the uncertain price
37731 <para>A basket with at least one uncertain price can't be
37738 <para>If you are charged sales tax, choose that from the gstrate
37743 <para>Enter the percentage discount you're receiving on this
37744 order, once you enter this, hit tab and Koha will populate the
37745 rest of the cost fields below.</para>
37749 <para>If you added Planning Values when <link linkend="addbudgetfund">creating the Fund</link>, those values
37750 will appear in the two Planning Value fields.</para>
37753 <para>Once you have filled in all of the fields click 'Save' to add the item to your basket.
37754 If your price goes over the amount availalbe in the fund you will be presented with a
37755 confirmation.</para>
37757 <screeninfo>Fund warning</screeninfo>
37760 <imagedata fileref="images/acquisitions/fundconfirmation.png"/>
37764 <para>The confirmation warning will allow you order past your fund amount if you so
37767 <para>After an item is added to the basket you will be presented with a basket
37771 <screeninfo>Basket with item info</screeninfo>
37775 <imagedata fileref="images/acquisitions/finalbasket.png"/>
37780 <para>If you would like to see more details you can check the 'Show
37781 all details' checkbox</para>
37784 <screeninfo>Show all details</screeninfo>
37788 <imagedata fileref="images/acquisitions/showalldetails.png"/>
37793 <para>From here, you can edit or remove the items that you have
37798 <para>Choosing to 'Delete the order' will delete the order line
37799 but leave the record in the catalog.</para>
37803 <para>Choosing to 'Delete order and catalog record' removes both
37804 the order line and the record in the catalog.</para>
37808 <para>The catalog record cannot always be deleted. You might
37809 see notes explaining why.</para>
37812 <screeninfo>Can't delete order line</screeninfo>
37816 <imagedata fileref="images/acquisitions/cantdeleteorderline.png"/>
37825 <para>On the summary page, you also have the option to edit the
37826 information that you entered about the basket by clicking the 'Edit
37827 basket header information' button, to delete the basket altogether by
37828 clicking the 'Delete this basket' button, or to export your basket as
37829 a CSV file by clicking the 'Export this basket as CSV' button.</para>
37832 <screeninfo>Basket Buttons</screeninfo>
37836 <imagedata fileref="images/acquisitions/basketbuttons.png"/>
37840 <para>If you're using EDI for your order you can click the 'Create EDIFACT order' button
37841 when you're done to send the file to the vendor and close the basket.<screenshot>
37842 <screeninfo>EDIFACT Order</screeninfo>
37845 <imagedata fileref="images/acquisitions/edifactorder.png"/>
37848 </screenshot></para>
37849 <para>Once you're sure your basket is complete, you can click 'Close this basket' button to
37850 indicate that this basket is complete and has been sent to the vendor. </para>
37852 <para>You must close the basket to be able to <link linkend="receiveacqorder">receive
37853 items</link> when they arrive. Only items in closed baskets will show as ready to
37856 <para>If you have your <link linkend="BasketConfirmations">BasketConfirmations</link>
37857 preference set to show a confirmation, you will be asked if you are sure about closing the
37861 <screeninfo>Basket Closure Confirmation</screeninfo>
37865 <imagedata fileref="images/acquisitions/BasketConfirmations.png"/>
37870 <para>When closing the basket you can choose to add the basket to a group for easy printing
37871 and retrieval. If you check the box to 'Attach this basket to a new basket group' you will
37872 be brought to the group list where you can print a PDF of the order.</para>
37875 <screeninfo>Closed Baskets</screeninfo>
37879 <imagedata fileref="images/acquisitions/basketgroup.png"/>
37885 <para>A basket with at least one item marked as 'uncertain price'
37886 will not be able to be closed.</para>
37889 <screeninfo>A basket with items where the price is
37890 uncertain</screeninfo>
37894 <imagedata fileref="images/acquisitions/basketuncertain.png"/>
37898 </important></para>
37900 <para>Clicking the 'Uncertain Prices' button will call up a list of
37901 items with uncertain prices to quick editing. From that list, you can
37902 quickly edit the items by entering new prices and quantities.</para>
37905 <screeninfo>Uncertain Prices</screeninfo>
37909 <imagedata fileref="images/acquisitions/uncertainprices.png"/>
37915 <para>The Uncertain Prices page is independent of the basket. It is
37916 linked to the vendor so you will see all items on order with
37917 uncertain prices for that vendor.</para>
37919 <para>Once your order is entered you can search for it through acquisitions or view the
37920 information on the biblio detail page in the staff client (if the <link linkend="AcquisitionDetails">AcquisitionDetails</link> preference is set to 'Display).<screenshot>
37921 <screeninfo>Acquisitions details</screeninfo>
37924 <imagedata fileref="images/acquisitions/AcquisitionDetails.png"/>
37927 </screenshot></para>
37930 <section id="acqbasketgroup">
37931 <title><link linkend="acqbasketgroup">Create a basket group</link></title>
37933 <para>A basket group is simply a group of baskets. In some libraries,
37934 you have several staff members that create baskets, and, at the end of
37935 a period of time, someone then groups them together to send to the
37936 vendor in bulk. That said, it is possible to have one basket in a
37937 basket group if that's the workflow used in your library.</para>
37940 <section id="printacqbasket">
37941 <title><link linkend="printacqbasket">Printing baskets</link></title>
37943 <para>When you are finished adding items to your basket, click 'Close
37944 this Basket.'</para>
37947 <screeninfo>Close Basket</screeninfo>
37951 <imagedata fileref="images/acquisitions/closebasket.png"/>
37956 <para>You will be asked if you want to 'Attach this basket to a new basket group with the
37957 same name'. A basket group is necessary if you want to be able to print PDFs of your
37961 <screeninfo>Create Purchase Order</screeninfo>
37965 <imagedata fileref="images/acquisitions/createpurchaseorder.png"/>
37970 <para>Your completed order will be listed on the Basket Grouping page
37971 for printing or further modification.</para>
37974 <screeninfo>Basket Grouping</screeninfo>
37978 <imagedata fileref="images/acquisitions/basketgroup.png"/>
37982 <para>If you closed the basket before generating the EDIFACT order you can do so from the
37983 basket grouping page.</para>
37986 <screeninfo>Basket Grouping EDIFACT</screeninfo>
37989 <imagedata fileref="images/acquisitions/basketgroupedi.png"/>
37995 <para>Clicking the 'Print' button next to your order will generate a PDF for printing, which
37996 will have all of your library information followed by the items in your order.</para>
37999 <screeninfo>Order found on PDF</screeninfo>
38003 <imagedata fileref="images/acquisitions/pdforder.png"/>
38010 <section id="receiveacqorder">
38011 <title><link linkend="receiveacqorder">Receiving Orders</link></title>
38013 <para>You must close the basket to be able to <link linkend="receiveacqorder">receive
38014 items</link> when they arrive. Only items in closed baskets will show as ready to
38018 <para>Orders can be received from the vendor information page</para>
38021 <screeninfo>Receive from Vendor Information</screeninfo>
38025 <imagedata fileref="images/acquisitions/receivebutton.png"/>
38030 <para>or the vendor search results page</para>
38033 <screeninfo>Vendor Search Results</screeninfo>
38037 <imagedata fileref="images/acquisitions/receivefromsearch.png"/>
38042 <para>After clicking 'Receive shipment' you will be asked to enter a vendor invoice number, a
38043 shipment received date, a shipping cost and a budget to subtract that shipping amount
38047 <screeninfo>Receive Shipment</screeninfo>
38051 <imagedata fileref="images/acquisitions/receive.png"/>
38056 <para>The receive page will list all items still on order with the
38057 vendor regardless of the basket the item is from.</para>
38060 <screeninfo>Receipt Summary</screeninfo>
38064 <imagedata fileref="images/acquisitions/receiptsummary.png"/>
38069 <para>To receive a specific item, click the 'Receive' link to the right
38070 of the item.</para>
38073 <screeninfo>Receive Item Form</screeninfo>
38077 <imagedata fileref="images/acquisitions/receiveitem.png"/>
38082 <para>From this form you can alter the cost information. You can also
38083 choose to mark only part of the order as received if the vendor didn't
38084 send your entire order by checking only the boxes next to the items on
38085 the left that you want to receive. The values you enter in the
38086 'Replacement cost' and 'Actual cost' will automatically populate the
38087 item record by filling in subfield v (Cost, replacement price) and
38088 subfield g (Cost, normal purchase price) on the item record after
38092 <screeninfo>Item record after receipt</screeninfo>
38096 <imagedata fileref="images/acquisitions/receiveditem.png"/>
38101 <para>You can also make edits to the item record from this form by clicking the 'Edit' link
38102 next to each item. This will allow you to enter in accurate call numbers and barcodes if
38103 you'd like to do that at the point of receipt. Once you have made any changes necessary (to
38104 the order and/or items, click 'Save' to mark the item(s) as received.<note>
38105 <para>If you have your <link linkend="AcqItemSetSubfieldsWhenReceived">AcqItemSetSubfieldsWhenReceived</link> preference set to add or change values on
38106 received items those changes will take place after you hit 'Save'. </para>
38110 <screeninfo>Already Received Items</screeninfo>
38114 <imagedata fileref="images/acquisitions/received.png"/>
38118 <para>If the item is no longer available from this vendor you can transfer the order to
38119 another vendor's basket by clicking the 'Transfer' link to the right of the title. This will
38120 pop up a vendor search box.</para>
38122 <screeninfo>Transfer search</screeninfo>
38125 <imagedata fileref="images/acquisitions/transfersearch.png"/>
38129 <para>From the results you can click 'Choose' to the right of the vendor you would like to
38130 reorder this item from.</para>
38132 <screeninfo>Transfer vendor</screeninfo>
38135 <imagedata fileref="images/acquisitions/transfervendor.png"/>
38139 <para>You will then be presented with the open baskets for that vendor to choose from. To move
38140 the item simply click 'Choose' to the right of the basket you would like to add the item
38143 <screeninfo>Basket choice</screeninfo>
38146 <imagedata fileref="images/acquisitions/transferbasket.png"/>
38150 <para>Once you have chosen you will be presented with a confirmation message.</para>
38152 <screeninfo>Confirm transfer</screeninfo>
38155 <imagedata fileref="images/acquisitions/transferconfirm.png"/>
38160 <para>When you're finished receiving items you can navigate away from
38161 this page or click the 'Finish receiving' button at the bottom of the
38163 <para>If the item cannot be found anywhere you can cancel the order by clicking 'Delete order'
38164 to the far right. This will prompt you to enter your reason and confirm cancellation.<screenshot>
38165 <screeninfo>Cancel order</screeninfo>
38168 <imagedata fileref="images/acquisitions/cancelorder.png"/>
38171 </screenshot></para>
38173 <para>You will also see that the item is received and/or cancelled if
38174 you view the basket.</para>
38177 <screeninfo>One item marked (rcvd) in basket</screeninfo>
38181 <imagedata fileref="images/acquisitions/basketwithreceived.png"/>
38186 <section id="acqinvoices">
38187 <title><link linkend="acqinvoices">Invoices</link></title>
38188 <para>When orders are received invoices are generated. Invoices can be searched by clicking
38189 on 'Invoices' in the left of the Acquisitions page.</para>
38191 <screeninfo>Invoices page</screeninfo>
38194 <imagedata fileref="images/acquisitions/invoicesearch.png"/>
38198 <para>After searching, your results will appear to the right of the search options.</para>
38200 <screeninfo>Invoice search results</screeninfo>
38203 <imagedata fileref="images/acquisitions/invoices.png"/>
38207 <para>From the results you can click the 'Details' link to see the full invoice or 'Close' to
38208 note that the invoice is closed/paid for.</para>
38210 <screeninfo>Invoice details</screeninfo>
38213 <imagedata fileref="images/acquisitions/invoice.png"/>
38217 <para>If you're allowing the uploading of acquisitions files with the <link linkend="AcqEnableFiles">AcqEnableFiles</link> preference you will see the option to
38218 manage invoice files next to the link to 'Go to receipt page'<screenshot>
38219 <screeninfo>AcqEnableFiles</screeninfo>
38222 <imagedata fileref="images/acquisitions/AcqEnableFiles.png"/>
38225 </screenshot></para>
38226 <para>To see or attach new files click the 'Manage invoice files' link</para>
38228 <screeninfo>No invoice files</screeninfo>
38231 <imagedata fileref="images/acquisitions/noinvoicefiles.png"/>
38235 <para>From here you can find a file to upload and/or see the files you have already
38238 <screeninfo>Invoice files</screeninfo>
38241 <imagedata fileref="images/acquisitions/invoicefiles.png"/>
38245 <para>From the invoice search results you can also merge together two invoices should you need
38246 to. Simply click the checkbox to the left of the invoices you would like to merge and click
38247 the 'Merge selected invoices' button at the bottom of the page. You will be presented with a
38248 confirmation screen:</para>
38250 <screeninfo>Merge invoices</screeninfo>
38253 <imagedata fileref="images/acquisitions/mergeinvoices.png"/>
38257 <para>Click on the row of the invoice number you would like to keep and it will be highlighted
38258 in yellow. Enter any different billing information in the fields provided and click
38259 'Merge'. The two invoices will become one.</para>
38262 <section id="acqclaims">
38263 <title><link linkend="acqclaims">Claims & Late Orders</link></title>
38265 <para>If you have entered in an email address for the vendors in your
38266 system you can send them claim emails when an order is late. Before you
38267 can send claims you will need to set up an <link linkend="ACQCLAIM">acquisitions claim notice</link>.</para>
38269 <para>Upon clicking on the link to 'Late Orders' from the Acquisitions
38270 page you will be presented with a series of filter options on the left
38271 hand side. These filters will be applied only closed baskets.</para>
38274 <screeninfo>Acquisitions Late Order Filters</screeninfo>
38278 <imagedata fileref="images/acquisitions/acqclaimfilter.png"/>
38284 <para>The vendor pull down only shows vendors with closed baskets that
38288 <para>Once you filter your orders to show you the things you consider to
38289 be late you will be presented with a list of these items.</para>
38292 <screeninfo>Late Orders</screeninfo>
38296 <imagedata fileref="images/acquisitions/lateorders.png"/>
38301 <para>To the right of each late title you will be see a checkbox. Check
38302 off the ones you want a claim letter sent to and click 'Claim Order' at
38303 the bottom right of the list. This will automatically send an email to
38304 the vendor at the email address you have on file.<note>
38305 <para>The Estimated Delivery Date is based on the Delivery time
38306 value entered on the vendor record.</para>
38309 <para>If you would rather use a different acquisition claim letter
38310 (other than the default) you can <link linkend="addnotices">create that
38311 in the notices module</link> and choose it from the menu above the list
38312 of late items.</para>
38315 <screeninfo>Choose a Claim Letter</screeninfo>
38319 <imagedata fileref="images/acquisitions/claimletter.png"/>
38325 <section id="acqsearch">
38326 <title><link linkend="acqsearch">Acquisition Searches</link></title>
38328 <para>At the top of the various Acquisition pages there is a quick
38329 search box where you can perform either a Vendor Search or an Order
38333 <screeninfo>Acquisition Searches</screeninfo>
38337 <imagedata fileref="images/acquisitions/acqsearches.png"/>
38342 <para>In the Vendor Search you can enter any part of the vendor name to
38343 get results.</para>
38346 <screeninfo>Vendor Search Results</screeninfo>
38350 <imagedata fileref="images/acquisitions/vendorquicksearch.png"/>
38355 <para>Using the Orders Search you can search for items that have been
38356 ordered with or without the vendor.</para>
38359 <screeninfo>Order Search Box</screeninfo>
38363 <imagedata fileref="images/acquisitions/ordersearch.png"/>
38368 <para>You can enter info in one or both fields and you can enter any
38369 part of the title and/or vendor name.</para>
38372 <screeninfo>Order Search Results</screeninfo>
38376 <imagedata fileref="images/acquisitions/ordersearchresults.png"/>
38381 <para>Clicking the plus sign to the right of the Vendor search box will
38382 expand the search and allow you to search for additional fields.</para>
38385 <screeninfo>Expanded Orders Search</screeninfo>
38389 <imagedata fileref="images/acquisitions/ordersearchexpand.png"/>
38394 <para>Clicking Advanced Search to the right of the search button will
38395 give you all of the order search options available.</para>
38398 <screeninfo>Full Order Search</screeninfo>
38402 <imagedata fileref="images/acquisitions/ordersearchfull.png"/>
38408 <section id="fundtracking">
38409 <title><link linkend="fundtracking">Budget/Fund Tracking</link></title>
38411 <para>On the main acquisitions page there will be a table showing you all of your active funds
38412 and a breakdown of what has been ordered or spent against them.</para>
38415 <screeninfo>Fund Table</screeninfo>
38419 <imagedata fileref="images/acquisitions/acqfunds.png"/>
38424 <para>Clicking on the linked amounts under spent or ordered will show you a summary of the
38425 titles ordered/received on that budget.</para>
38428 <screeninfo>Titles Spent</screeninfo>
38432 <imagedata fileref="images/acquisitions/spent.png"/>
38437 <section id="ediprocess">
38438 <title><link linkend="ediprocess">EDI Process</link></title>
38439 <para>Previous sections explain all ordering options, this section pulls out the parts related
38440 to EDI or EDIFACT ordering to help those who are only using EDI for ordering. <important>
38441 <para>Koha uses the EDIFACT standard not the X12 standard for electronic ordering.</para>
38442 </important></para>
38443 <section id="ediquestions">
38444 <title><link linkend="ediquestions">EDI Questions for Vendors</link></title>
38445 <para>You will want to gather the following information from your vendors before beginning
38446 the set up process in Koha.</para>
38447 <para><emphasis role="bold">EDI Accounts:</emphasis> <emphasis role="italic">This is the
38448 basic connection information for your vendor. This will be used to fill in the <link
38449 linkend="ediaccounts">EDI Accounts</link> section.</emphasis></para>
38452 <para><emphasis role="bold">Vendor:</emphasis> The name of the vendor</para>
38455 <para><emphasis role="bold">Description:</emphasis> A short description if additional
38456 explanation is needed ( especially if you have multiple accounts for one vendor
38460 <para><emphasis role="bold">Transport:</emphasis> Does the vendor transmit EDI files via
38461 FTP, SFTP, or something else the requires special processing?</para>
38464 <para><emphasis role="bold">Remote host:</emphasis> The URL or IP address of the
38465 FTP/SFTP server</para>
38468 <para><emphasis role="bold">Username:</emphasis> The username for the above
38472 <para><emphasis role="bold">Password:</emphasis> The password for the above
38476 <para><emphasis role="bold">Download directory:</emphasis> The path on the server that
38477 contains files for Koha to download and process</para>
38480 <para><emphasis role="bold">Upload directory:</emphasis> The path on the server that
38481 Koha will upload files to for your vendor to process</para>
38484 <para><emphasis role="bold">Qualifier:</emphasis> Who assigned the SAN below?</para>
38487 <para> Choose one of the following:</para>
38488 <para> (14) EAN International</para>
38489 <para> (31B) US SAN Agency</para>
38490 <para> (91) Assigned by supplier</para>
38491 <para> (92) Assigned by buyer</para>
38496 <para><emphasis role="bold">SAN:</emphasis> The identifier for the vendor</para>
38497 <para><emphasis role="italic">Buyer qualifier and SAN are optional. Some vendors require
38498 a second buyer identifier in addition to the account EAN</emphasis>.</para>
38501 <para><emphasis role="bold">Buyer qualifier:</emphasis> Who assigned the SAN
38505 <para> Choose one of the following:</para>
38506 <para> (14) EAN International</para>
38507 <para> (31B) US SAN Agency</para>
38508 <para> (91) Assigned by supplier</para>
38509 <para> (92) Assigned by buyer</para>
38514 <para><emphasis role="bold">Buyer SAN:</emphasis> The identifier for the library</para>
38517 <para><emphasis role="bold">Quotes enabled:</emphasis> [y/n] Does this vendor support
38518 sending and receiving quotes via EDIfact and do you want to send and receive quotes
38519 via EDIfact?</para>
38522 <para><emphasis role="bold">Orders enabled:</emphasis> [y/n] Does this vendor support
38523 sending and receiving orders via EDIfact and do you want to send and receive orders
38524 via EDIfact?</para>
38527 <para><emphasis role="bold">Invoices enabled: </emphasis>[y/n] Does this vendor support
38528 sending and receiving invoices via EDIfact and do you want to send and receive
38529 invoices via EDIfact?</para>
38532 <para><emphasis role="bold">Order file suffix:</emphasis> The file suffix for order
38536 <para><emphasis role="bold">Quote file suffix:</emphasis> The file suffix for quote
38540 <para><emphasis role="bold">Invoice file suffix:</emphasis> The file suffix for invoice
38544 <para><emphasis role="bold">Account number(s):</emphasis> (list them all)</para>
38547 <para><emphasis role="bold">Account description(s):</emphasis> (the summary of what this
38548 number is for)</para>
38551 <para><emphasis role="bold">EANs:</emphasis> <emphasis role="italic">Each library using
38552 EDIfact needs to specify a buyer identifier know as a SAN or EAN. This will fill in the
38553 <link linkend="libraryeans">Library EANs</link> setting.</emphasis></para>
38556 <para><emphasis role="bold">Library</emphasis></para>
38559 <para><emphasis role="bold">EAN</emphasis></para>
38562 <para> Choose one of the following:</para>
38563 <para> (14) EAN International</para>
38564 <para> (31B) US SAN Agency</para>
38565 <para> (91) Assigned by supplier</para>
38566 <para> (92) Assigned by buyer</para>
38571 <para><emphasis role="bold">MARC Order Fields or Grid Ordering:</emphasis> <emphasis
38572 role="italic">These values will fill in the <link linkend="MarcFieldsToOrder"
38573 >MarcFieldsToOrder</link> preference.</emphasis></para>
38577 <para><emphasis role="bold">price:</emphasis> MARC21 field that contains the item
38581 <para><emphasis role="bold">quantity:</emphasis> MARC21 field that contains the number
38582 of items for the given record</para>
38585 <para><emphasis role="bold">budget_code:</emphasis> MARC21 field that contains the
38586 Koha budget code to be debited</para>
38589 <para><emphasis role="bold">discount:</emphasis> MARC21 field the contains the
38590 discount as a percentage the the price will be discounted by</para>
38593 <para><emphasis role="bold">sort2:</emphasis> MARC21 field that will populate custom
38597 <para><emphasis role="bold">sort2:</emphasis> MARC21 field that will populate custom
38603 <section id="edisetup">
38604 <title><link linkend="edisetup">EDI Setup</link></title>
38605 <para>Before you begin ordering using EDI you will want to take the following steps:<itemizedlist>
38607 <para>Ask your vendor/bookseller/jobber for <link linkend="ediquestions">connection
38608 information</link><itemizedlist>
38610 <para>It might also be beneficial to ask for a few sample EDIFACT files from the
38613 </itemizedlist></para>
38616 <para>Share with your vendor/bookseller/jobber your <link linkend="libsgroups">library
38617 codes</link>, <link linkend="itemtypeadmin">item type codes</link>, <link
38618 linkend="funds">fund codes</link>, and any other codes or <link
38619 linkend="authorizedvalues">authorized values</link> they might need for creating
38620 your MARC order records</para>
38623 <para>Communicate with your support provider or the community about whether you will
38624 need a plugin based on your vendor's answers<itemizedlist>
38626 <para>For example ByWater Solutions has published plugins for specific vendors
38628 url="https://github.com/bywatersolutions/koha-plugin-edifact-enhanced"
38629 >https://github.com/bywatersolutions/koha-plugin-edifact-enhanced</ulink></para>
38631 </itemizedlist></para>
38634 <para><link linkend="addacqvendor">Enter the vendor/bookseller/jobber</link> in
38635 Acquisitions</para>
38638 <para>Review your <link linkend="acqprefs">Acquisitions system preferences</link><itemizedlist>
38640 <para>Be sure to fill in the <link linkend="MarcFieldsToOrder"
38641 >MarcFieldsToOrder</link> preference with values for order files</para>
38643 </itemizedlist></para>
38646 <para>Enter your <link linkend="ediaccounts">EDI Accounts</link></para>
38649 <para>Enter your <link linkend="libraryeans">Library EANs</link></para>
38652 <para>Turn on the <link linkend="edicron">EDI Cron</link> so that it can process
38655 </itemizedlist></para>
38657 <section id="ediordering">
38658 <title><link linkend="ediordering">EDI Ordering</link></title>
38659 <para>The first step in ordering using EDI happens on the book vendor's website. Each
38660 seller will use different language, but you will need to place your order on their site
38661 and then download the MARC order file. Some language that you might see included "basket",
38662 "order", "cart", and/or "MARC order." Once you have this MARC file downloaded to your
38663 computer you will want to log in to Koha and continue the process there.</para>
38664 <para>Visit the <link linkend="stagemarc">Stage MARC Records for Import</link> tool and
38665 upload your file. Once presented with the confirmation screen proceed to
38666 Acquisitions.</para>
38667 <para>In Acquisitions <link linkend="createacqbasket">create a basket</link> for the vendor
38668 you ordered from. From the basket, choose to <link linkend="orderfromstagedfile">order
38669 from a staged file</link> and click 'Order' next to the file you downloaded from your
38670 vendor and staged in Koha.</para>
38671 <para>From the confirmation screen you will see all of the data in the MARC file related to
38672 your order. If you are not seeing fields such as fund and quanity filled in then be sure
38673 to confirm that your <link linkend="MarcFieldsToOrder">MarcFieldsToOrder</link> preference
38674 is set right.</para>
38675 <para>Once you have added all of the items to the basket you can click the 'Create EDIFACT
38676 order' button.</para>
38679 <screeninfo>EDIFACT Order</screeninfo>
38682 <imagedata fileref="images/acquisitions/edifactorder.png"/>
38687 <para>This will generate a pending file in the <link linkend="edifactmsg">EDIFACT
38688 Messages</link> in Koha. The pending files will be processed by the <link
38689 linkend="edicron">EDI Cron Job</link> and sent to your vendor. </para>
38691 <section id="ediinvoice">
38692 <title><link linkend="ediinvoice">EDI Invoicing</link></title>
38693 <para>When the book vendor is done processing your files they will send an invoice via EDI
38694 as well. The <link linkend="edicron">EDI Cron Job</link> will grab invoices and mark
38695 items found in the invoice as received and update your funds without any need for manual
38696 intervention.</para>
38699 <section id="edifactmsg">
38700 <title><link linkend="edifactmsg">EDIFACT Messages</link></title>
38701 <para>A log of all messages sent and received via EDIFACT can be found under EDIFACT Messages. <screenshot>
38702 <screeninfo>EDIFACT Messages</screeninfo>
38705 <imagedata fileref="images/acquisitions/edifactmsg.png"/>
38708 </screenshot></para>
38712 <chapter id="stafflists">
38713 <title>Lists & Cart</title>
38715 <para>Lists are a way to save a collection of content on a specific topic
38716 or for a specific purpose. The Cart is a session specific storage
38721 <para><emphasis>Get there:</emphasis> More > Lists</para>
38725 <section id="lists">
38726 <title><link linkend="lists">Lists</link></title>
38730 <section id="createlist">
38731 <title><link linkend="createlist">Create a List</link></title>
38733 <para>A list can be created by visiting the Lists page and clicking
38737 <screeninfo>New List Button</screeninfo>
38741 <imagedata fileref="images/lists/newlistbutton.png"/>
38746 <para>The new list form offers several options for creating your
38750 <screeninfo>New List Form</screeninfo>
38754 <imagedata fileref="images/lists/newlistform.png"/>
38761 <para>The name is what will appear on the list of Lists</para>
38765 <para>You can also choose how to sort the list</para>
38768 <para>Next decide if your list is going to be private or public</para>
38771 <para>A Private List is managed by you and can be seen only by you (depending on
38772 your permissions settings below)</para>
38775 <para>A Public List can be seen by everybody, but managed only by you (depending on
38776 your permissions settings below)</para>
38781 <para>Finally decide what your permissions will be on the list. You can all or disallow:<itemizedlist>
38783 <para>anyone else to add entries</para>
38786 <para>anyone to remove his own contributed entries<itemizedlist>
38789 <para>The owner of a list is always allowed to add entries, but needs
38790 permission to remove.</para>
38793 </itemizedlist></para>
38796 <para>anyone to remove other contributed entries </para>
38798 </itemizedlist></para>
38802 <para>A list can also be created from the catalog search
38806 <screeninfo>New list from catalog search</screeninfo>
38810 <imagedata fileref="images/lists/newlistsearch.png"/>
38817 <para>Check the box to the left of the titles you want to add to
38818 the new list</para>
38822 <para>Choose [New List] from the 'Add to:' pull down menu</para>
38825 <screeninfo>New List from Search Results</screeninfo>
38829 <imagedata fileref="images/lists/newlistfromsearch.png"/>
38836 <para>Name the list and choose what type of list this
38841 <para>A Private List is managed by you and can be seen
38846 <para>A Public List can be seen by everybody, but managed
38855 <para>Once the list is saved it will accessible from the Lists page
38856 and from the 'Add to' menu at the top of the search results.</para>
38859 <section id="addtolist">
38860 <title><link linkend="addtolist">Add to a List</link></title>
38862 <para>To add titles to an existing list click on the list name from
38863 the page of lists</para>
38866 <screeninfo>List of Lists</screeninfo>
38870 <imagedata fileref="images/lists/listslist.png"/>
38874 <para>To open a list you can click the list name.</para>
38876 <para>From that page you can add titles by scanning barcodes into the box at the bottom of
38880 <screeninfo>Content of a List</screeninfo>
38884 <imagedata fileref="images/lists/listcontents.png"/>
38889 <para>A title can also be added to a list by selecting titles on the
38890 search results page and choosing the list from the 'Add to'
38894 <screeninfo>Add to List</screeninfo>
38898 <imagedata fileref="images/lists/addtolist.png"/>
38904 <section id="viewlist">
38905 <title><link linkend="viewlist">Viewing Lists</link></title>
38907 <para>To see the contents of a list, visit the Lists page on the staff
38911 <screeninfo>List of Lists</screeninfo>
38915 <imagedata fileref="images/lists/listslist.png"/>
38920 <para>Clicking on the 'List Name' will show the contents of the
38924 <screeninfo>Content of a List</screeninfo>
38928 <imagedata fileref="images/lists/listcontents.png"/>
38932 <para>From this list of items you can perform several actions</para>
38935 <para>'New list' will allow you to create another list</para>
38938 <para>'Edit' will allow you to edit the description and permissions for this list</para>
38941 <para>'Send list' will send the list to the email address you enter (<link linkend="examplelistemail">view sample List email</link>)</para>
38944 <para>'Download list' will allow you to download the cart using one of 3 default formats
38945 or your <link linkend="csvprofiles">CSV Profiles</link></para>
38948 <para>'Print list' will present you with a printable version of the list</para>
38951 <para>Using the filters at the top of each column you can find specific items in your
38955 <section id="mergebibrecs">
38956 <title><link linkend="mergebibrecs">Merging Bibliographic Records Via Lists</link></title>
38957 <para>One way to merge together duplicate bibliographic records is to add them to a list and
38958 use the Merge Tool from there.</para>
38961 <screeninfo>List of Duplicate Records</screeninfo>
38965 <imagedata fileref="images/lists/listofdups.png"/>
38969 <para>Once you have selected the records to merge together the process is the same as if you
38970 had chosen to <link linkend="mergebibs">merge via cataloging</link>.</para>
38974 <section id="cart">
38975 <title><link linkend="cart">Cart</link></title>
38977 <para>The cart is a temporary holding place for items in the OPAC and/or
38978 staff client. The cart will be emptied once the session is ended (by
38979 closing the browser or logging out). The cart is best used for
38980 performing batch operations (holds, printing, emailing) or for getting a
38981 list of items to be printed or emailed to yourself or a patron.</para>
38983 <para>If you would like to enable the cart in the staff client, you need
38984 to set the <link linkend="intranetbookbag">intranetbookbag</link> system
38985 preference to 'Show.' To add things to the cart, search the catalog and
38986 select the items you would like added to your cart and choose 'Cart'
38987 from the 'Add to' menu</para>
38990 <screeninfo>Add to Cart</screeninfo>
38994 <imagedata fileref="images/lists/addtocart.png"/>
38999 <para>A confirmation will appear below the cart button at the top of the
39000 staff client</para>
39003 <screeninfo>Items added to Cart</screeninfo>
39007 <imagedata fileref="images/lists/itemsaddedcart.png"/>
39012 <para>Clicking on the Cart icon will provide you with the contents of
39016 <screeninfo>Cart Contents</screeninfo>
39020 <imagedata fileref="images/lists/cart.png"/>
39024 <para>From this list of items you can perform several actions</para>
39028 <para>'More details' will show more information about the items in the cart</para>
39032 <para>'Send' will send the list to the email address you enter (<link linkend="examplecartemail">view sample Cart email</link>)</para>
39036 <para>'Download' will allow you to download the cart using one of 3
39037 default formats or your <link linkend="csvprofiles">CSV
39038 Profiles</link></para>
39042 <para>'Print' will present you with a printable version of the
39047 <para>'Empty and Close' will empty the list and close the
39052 <para>'Hide Window' will close the window</para>
39058 <chapter id="reports">
39059 <title>Reports</title>
39061 <para>Reports in Koha are a way to gather data. Reports are used to
39062 generate statistics, member lists, shelving lists, or any list of data in
39063 your database.</para>
39067 <para><emphasis>Get there:</emphasis> More > Reports</para>
39071 <section id="customreports">
39072 <title><link linkend="customreports">Custom Reports</link></title>
39074 <para>Koha's data is stored in a MySQL database which means that
39075 librarians can generate nearly any report they would like by either
39076 using the <link linkend="quidedreportwizard">Guided Reports
39077 Wizard</link> or writing their own <link linkend="reportfromsql">SQL
39078 query</link>.</para>
39080 <section id="customreport">
39081 <title><link linkend="customreport">Add Custom Report</link></title>
39085 <section id="quidedreportwizard">
39086 <title><link linkend="quidedreportwizard">Guided Report Wizard</link></title>
39088 <para>The guided report wizard will walk you through a six step
39089 process to generate a report.</para>
39091 <para>Step 1: Choose the module you want to report on. This will
39092 determine what tables and fields are available for you to
39095 <para>'Report is public' should be left to the default of 'No' in
39096 most cases. A report can be made public if you intend to allow
39097 access to it through the JSON webservice interface. This is a system
39098 that can be used by developers to make custom presentations of the
39099 data from the report, for example displaying it using a graphing
39100 API. To learn more speak to your local developer.</para>
39104 <para>A public report is accessible via a URL that looks like
39105 this: http://MYOPAC/cgi-bin/koha/svc/report?id=REPORTID</para>
39110 <screeninfo>Chose Module for Report</screeninfo>
39114 <imagedata fileref="images/reports/report1.png"/>
39119 <para>If your system administrator has set up memcache on your server you might see one
39120 more option for the Cache expiry. This is related to your public reports. If you make
39121 the report public then it's constantly running and will cause a large load on your
39122 system. Setting this value prevents that.<screenshot>
39123 <screeninfo>Cache expiry</screeninfo>
39126 <imagedata fileref="images/reports/cacheexiprywizard.png"/>
39129 </screenshot></para>
39131 <para>Step 2: Choose a report type. For now, Tabular is the only option available.</para>
39134 <screeninfo>Report Type</screeninfo>
39138 <imagedata fileref="images/reports/report2.png"/>
39143 <para>Step 3: Choose the fields you want in your report. You can
39144 select multiple fields and add them all at once by using CTRL+Click
39145 on each item you want to add before clicking the Add button.</para>
39148 <screeninfo>Select database fields to query</screeninfo>
39152 <imagedata fileref="images/reports/report3.png"/>
39157 <para>Step 4: Choose any limits you might want to apply to your
39158 report (such as item types or branches). If you don't want to apply
39159 any limits, simply click Next instead of making an option.</para>
39162 <screeninfo>Choose limits</screeninfo>
39166 <imagedata fileref="images/reports/report4.png"/>
39171 <para>Step 5: Perform math functions. If you don't want to do any
39172 calculations, simply click Next instead of making an option.</para>
39175 <screeninfo>Choose math functions</screeninfo>
39179 <imagedata fileref="images/reports/report5.png"/>
39184 <para>Step 6: Choose data order. If you want the data to print out
39185 in the order it's found in the database, simply click Finish.</para>
39188 <screeninfo>Choose ordering</screeninfo>
39192 <imagedata fileref="images/reports/report6.png"/>
39197 <para>When you are finished you will be presented with the SQL
39198 generated by the report wizard. From here you can choose to save the
39199 report by clicking 'Save' or copy the SQL and make edits to it by
39203 <screeninfo>Custom Report Confirmation</screeninfo>
39207 <imagedata fileref="images/reports/reportconfirm.png"/>
39212 <para>If you choose to save the report you will be asked to name your report, sort it in
39213 to groups and subgroups and enter any notes regarding it.</para>
39216 <screeninfo>Save custom report</screeninfo>
39220 <imagedata fileref="images/reports/reportsave.png"/>
39225 <para>Once your report is saved it will appear on the 'Use Saved'
39226 page with all other saved reports.</para>
39229 <screeninfo>Saved Reports list</screeninfo>
39233 <imagedata fileref="images/reports/savedreports.png"/>
39238 <para>From here you can make edits, run the report, or schedule a time to have the report
39239 run. To find the report you created you can sort by any of the columns by clicking the
39240 on the column header (creation date is the best bet for finding the report you just
39241 added). You can also filter your results using the filter menu on the left or use the
39242 tabs to find reports based on your custom groups.</para>
39245 <section id="reportfromsql">
39246 <title><link linkend="reportfromsql">Report from SQL</link></title>
39248 <para>In addition to the report wizard, you have the option to write
39249 your own queries using SQL. To find reports written by other Koha
39250 users, visit the Koha Wiki: <ulink url="http://wiki.koha-community.org/wiki/SQL_Reports_Library">http://wiki.koha-community.org/wiki/SQL_Reports_Library</ulink>.
39251 You can also find your database structure in
39252 /installer/data/mysql/kohastructure.sql or online at: <ulink url="http://schema.koha-community.org/">http://schema.koha-community.org</ulink>.</para>
39254 <para>To add your query, click the link to 'Create from SQL' on the main reports module or
39255 the 'New report' button at the top of the 'Saved reports' page.</para>
39258 <screeninfo>New SQL Report</screeninfo>
39262 <imagedata fileref="images/reports/newsql.png"/>
39267 <para>Fill in the form presented</para>
39270 <screeninfo>Create Report from SQL</screeninfo>
39274 <imagedata fileref="images/reports/reportfromsql.png"/>
39281 <para>The 'Name' is what will appear on the Saved Reports page
39282 to help you identify the report later. It will also be
39283 searchable using the filters found the left of the Saved Reports
39288 <para>You can use the 'Report group' to organize your reports so that you can easily
39289 filter reports by groups. Report groups are set in the <link linkend="reportgroup">REPORT_GROUP</link> authorized value category or can be added on the fly when
39290 creating the report by choosing the 'or create' radio button.<screenshot>
39291 <screeninfo>Report group</screeninfo>
39294 <imagedata fileref="images/reports/reportgroup.png"/>
39297 </screenshot><itemizedlist>
39301 <para>If you're adding a report group on the fly, remember that you code
39302 should be fewer than 10 characters and should not include special
39303 characters or spaces.</para>
39307 </itemizedlist></para>
39311 <para>You can use 'Report subgroup' to further organize your reports so that you can
39312 easily filter reports by groups and subgroups. Report subgroups are set in the <link linkend="reportsubgroup">REPORT_SUBGROUP</link> authorized value category or can
39313 be added on the fly when creating the report by choosing the 'or create' radio
39316 <screeninfo>Report subgroup</screeninfo>
39319 <imagedata fileref="images/reports/reportsubgroup.png"/>
39327 <para>If you're adding a report subgroup on the fly, remember that you code
39328 should be fewer than 10 characters and should not include special characters
39336 <listitem id="publicreport">
39337 <para>'Report is public' should be left to the default of 'No' in most cases. A report
39338 can be made public if you intend to allow access to it through the JSON webservice
39339 interface. This is a system that can be used by developers to make custom
39340 presentations of the data from the report, for example displaying it using a
39341 graphing API. To learn more speak to your local developer.</para>
39344 <para>A public report is accessible via a URL that looks like this:
39345 http://MYOPAC/cgi-bin/koha/svc/report?id=REPORTID</para>
39351 <para>'Notes' will also appear on the Saved Reports page, this
39352 can be used to provide more details about the report or tips on
39353 how to enter values when it runs</para>
39357 <para>The type should always be 'Tabular' at this time since the
39358 other formats have not been implemented</para>
39362 <para>In the 'SQL' box you will type or paste the SQL for the
39367 <para>If you feel that your report might be too resource
39368 intensive you might want to consider using runtime parameters to
39369 your query. Runtime parameters basically make a filter appear
39370 before the report is run to save your system resources.</para>
39372 <para>There is a specific syntax that Koha will understand as
39373 'ask for values when running the report'. The syntax is
39374 <<Question to ask|authorized_value>>.</para>
39378 <para>The << and >> are just delimiters. You
39379 must put << at the beginning and >> at the end
39380 of your parameter</para>
39384 <para>The 'Question to ask' will be displayed on the left of
39385 the string to enter.</para>
39389 <para>The authorized_value can be omitted if not applicable. If it contains an
39390 authorized value category, or branches or itemtype or categorycode or
39391 biblio_framework, a list with the Koha authorized values will be displayed
39392 instead of a free field Note that you can have more than one parameter in a
39393 given SQL Note that entering nothing at run time won't probably work as you
39394 expect. It will be considered as "value empty" not as "ignore this parameter".
39395 For example entering nothing for : "title=<<Enter title>>" will
39396 display results with title='' (no title). If you want to have to have something
39397 not mandatory, use "title like <<Enter title>>" and enter a % at run
39398 time instead of nothing</para>
39402 <para>Examples:</para>
39406 <para>SELECT surname,firstname FROM borrowers WHERE
39407 branchcode=<<Enter patrons library|branches>>
39408 AND surname like <<Enter filter for patron surname (%
39409 if none)>></para>
39413 <para>SELECT * FROM items WHERE homebranch = <<Pick your
39414 branch|branches>> and barcode like <<Partial barcode value
39415 here>></para>
39418 <para>SELECT title , author FROM biblio WHERE frameworkcode=<<Enter the
39419 frameworkcode|biblio_framework>> </para>
39424 <para>To generate a date picker calendar to the right of the
39425 field when running a report you can use the 'date' keyword
39426 like this: <<Enter Date|date>></para>
39429 <screeninfo>Date Picker</screeninfo>
39433 <imagedata fileref="images/reports/datepicker.png"/>
39440 <para>You have to put "%" in a text box to 'leave it blank'.
39441 Otherwise, it literally looks for "" (empty string) as the
39442 value for the field.</para>
39446 <para>In addition to using any authorized value code to generate a dropdown, you
39447 can use the following values as well: Framework codes (biblio_framework),
39448 Branches (branches), Item Types (itemtypes) and Patron Categories
39449 (categorycode). For example a branch pull down would be generated like this
39450 <<Branch|branches>></para>
39453 <screeninfo>Branch pull down</screeninfo>
39457 <imagedata fileref="images/reports/branchpulldown.png"/>
39461 </important></para>
39466 <para>There is a limit of 10,000 records put on SQL statements entered in Koha. To get
39467 around this you want to add 'LIMIT 100000' to the end of your SQL statement (or any
39468 other number above 10,000).</para>
39471 <para>If your system administrator has set up memcache on your server you might see one
39472 more option for the Cache expiry. This is related to your public reports. If you make
39473 the report public then it's constantly running and will cause a large load on your
39474 system. Setting this value prevents that.<screenshot>
39475 <screeninfo>Cache expiry</screeninfo>
39478 <imagedata fileref="images/reports/cacheexpiry.png"/>
39481 </screenshot></para>
39484 <para>Once everything is entered click the 'Save Report' button and
39485 you'll be presented with options to run it. Once a report is saved
39486 you do not have to recreate it you can simply find it on the Saved
39487 Reports page and <link linkend="runcustomreport">run</link> or <link linkend="editcustomreports">edit</link> it.</para>
39489 <section id="duplicatereport">
39490 <title><link linkend="duplicatereport">Duplicate Report</link></title>
39491 <para>Reports can also be added by duplicating an existing report. Visit the 'Saved
39492 reports' page to see all of the reports listed on your system already.</para>
39494 <screeninfo>Saved Reports</screeninfo>
39497 <imagedata fileref="images/reports/duplicatereport.png"/>
39501 <para>To the right of every report there is an 'Actions' pull down. Clickin that and
39502 choose 'Duplicate' to use an existing report as the basis for your new report. That will
39503 populate the new report form with the existing SQL for easy editing and resaving.</para>
39507 <section id="editcustomreports">
39508 <title><link linkend="editcustomreports">Edit Custom Reports</link></title>
39510 <para>Every report can be edited from the reports lists. To see the
39511 list of reports already stored in Koha, click 'Use Saved.'</para>
39514 <screeninfo>Saved Reports</screeninfo>
39518 <imagedata fileref="images/reports/savedreports.png"/>
39523 <para>To find the report you'd like to edit you can sort by any of the columns by clicking
39524 the on the column header. You can also filter your results using the filter menu on the
39525 left or use the tabs to find reports based on your custom groups.</para>
39527 <para>From this list you can edit any custom report by clicking 'Actions' to the right of
39528 the report and choosing 'Edit' from the menu that appears.</para>
39530 <screeninfo>Edit Report Option</screeninfo>
39533 <imagedata fileref="images/reports/editreportoption.png"/>
39537 <para>The form to edit the report will appear.</para>
39540 <screeninfo>Edit SQL Form</screeninfo>
39544 <imagedata fileref="images/reports/editreport.png"/>
39550 <section id="runcustomreport">
39551 <title><link linkend="runcustomreport">Running Custom Reports</link></title>
39553 <para>Once custom reports are saved to Koha, you can run them by going to the Saved Reports
39554 page and clicking the 'Actions' button to the right of the report and choosing
39558 <screeninfo>Run Report</screeninfo>
39562 <imagedata fileref="images/reports/runreport.png"/>
39567 <para>When you report runs you will either be asked for some
39571 <screeninfo>Enter report parameters</screeninfo>
39575 <imagedata fileref="images/reports/reportparameters.png"/>
39580 <para>or you will see the results right away</para>
39583 <screeninfo>Report results</screeninfo>
39587 <imagedata fileref="images/reports/reportresults.png"/>
39592 <para>From the results you can choose to rerun the report by clicking
39593 'Run report' at the top, edit the report by clicking the 'Edit' button
39594 or starting over and creating a new report by using the 'New' button.
39595 You can also download your results by choosing a file type at the
39596 bottom of the results next to the 'Download the report' label and
39597 clicking 'Download.'<note>
39598 <para>A Comma Separated Text file is a CSV file and it can be
39599 opened by any spreadsheet application.</para>
39604 <section id="statsreports">
39605 <title><link linkend="statsreports">Statistics Reports</link></title>
39607 <para>Statistic reports will show you counts and sums. These reports are
39608 all about numbers and statistics, for reports that return more detailed
39609 data, use the <link linkend="quidedreportwizard">Guided Report
39610 Wizard</link>. These reports are limited in what data they can look at,
39611 so it's often recommended to use <link linkend="customreports">custom
39612 reports</link> for official end of the year statistics.</para>
39614 <section id="acqstats">
39615 <title><link linkend="acqstats">Acquisitions Statistics</link></title>
39618 <para>These reports are limited in what data they can look at, so
39619 it's often recommended to use <link linkend="customreports">custom
39620 reports</link> for official end of the year statistics.</para>
39623 <para>Using the form provided, choose which value you would like to
39624 appear in the Column and which will appear in the Row.</para>
39627 <screeninfo>Acquisitions Statistics</screeninfo>
39631 <imagedata fileref="images/reports/acqform.png"/>
39636 <para>If you choose to output to the browser your results will print
39637 to the screen.</para>
39640 <screeninfo>Acquisitions Statistics Results</screeninfo>
39644 <imagedata fileref="images/reports/acqnumbers.png"/>
39649 <para>You can also choose to export to a file that you can manipulate
39650 to your needs.</para>
39652 <para>When generating your report, note that you get to choose between
39653 counting or summing the values.</para>
39656 <screeninfo>Acquisitions Stats Options</screeninfo>
39660 <imagedata fileref="images/reports/acqtotal.png"/>
39665 <para>Choosing amount will change your results to appear as the sum of
39666 the amounts spent.</para>
39669 <screeninfo>Acquisitions statistics with totals</screeninfo>
39673 <imagedata fileref="images/reports/acqamounts.png"/>
39679 <section id="patstats">
39680 <title><link linkend="patstats">Patron Statistics</link></title>
39683 <para>These reports are limited in what data they can look at, so
39684 it's often recommended to use <link linkend="customreports">custom
39685 reports</link> for official end of the year statistics.</para>
39688 <para>Using the form provided, choose which value you would like to
39689 appear in the Column and which will appear in the Row.</para>
39692 <screeninfo>Patron Statistics Options</screeninfo>
39696 <imagedata fileref="images/reports/patronform.png"/>
39701 <para>If you choose to output to the browser your results will print
39702 to the screen.</para>
39705 <screeninfo>Patron Statistics Results</screeninfo>
39709 <imagedata fileref="images/reports/patronresults.png"/>
39714 <para>Based on your selections, you may see some query information
39715 above your results table. You can also choose to export to a file that
39716 you can manipulate to your needs.</para>
39719 <section id="catstats">
39720 <title><link linkend="catstats">Catalog Statistics</link></title>
39723 <para>These reports are limited in what data they can look at, so
39724 it's often recommended to use <link linkend="customreports">custom
39725 reports</link> for official end of the year statistics.</para>
39728 <para>Using the form provided, choose which value you would like to
39729 appear in the Column and which will appear in the Row.</para>
39732 <screeninfo>Catalog Statistics Form</screeninfo>
39736 <imagedata fileref="images/reports/catalogform.png"/>
39741 <para>If you choose to output to the browser your results will print
39742 to the screen.</para>
39745 <screeninfo>Catalog Statistic Results</screeninfo>
39749 <imagedata fileref="images/reports/catalogresults.png"/>
39754 <para>You can also choose to export to a file that you can manipulate
39755 to your needs.</para>
39758 <section id="circstats">
39759 <title><link linkend="circstats">Circulation Statistics</link></title>
39762 <para>These reports are limited in what data they can look at, so
39763 it's often recommended to use <link linkend="customreports">custom
39764 reports</link> for official end of the year statistics.</para>
39767 <para>Using the form provided, choose which value you would like to
39768 appear in the Column and which will appear in the Row.</para>
39771 <screeninfo>Circulation Statistics</screeninfo>
39775 <imagedata fileref="images/reports/circform.png"/>
39780 <para>If you choose to output to the browser your results will print
39781 to the screen.</para>
39784 <screeninfo>Circulation Statistic Results</screeninfo>
39788 <imagedata fileref="images/reports/circresults.png"/>
39793 <para>You can also choose to export to a file that you can manipulate
39794 to your needs.<note>
39795 <para>To get a complete picture of your monthly or daily
39796 circulation, you can run the report twice, once for 'Type' of
39797 'Checkout' and again for 'Renewal.'</para>
39799 <para>This report uses 'Period,' or date, filtering that allows
39800 you to limit to a month by simply selecting the first day of the
39801 first month through the first day of the next month. For example,
39802 10/1 to 11/1 to find statistics for the month of October.</para>
39806 <para>To find daily statistics, set your date
39807 range.</br> Example: "I want circulation data starting
39808 with date XXX up to, but not including, date XXX."</para>
39812 <para>For a whole month, an example range would be: 11/01/2009
39813 to 12/01/2009</para>
39817 <para>For a whole year, an example range would be: 01/01/2009
39818 to 01/01/2010</para>
39822 <para>For a single day, an example would be: 11/15/2009 to
39823 11/16/2009 to find what circulated on the 15th</para>
39828 <section id="inhouseuse">
39829 <title><link linkend="inhouseuse">Tracking in house use</link></title>
39831 <para>Using the Circulation statistics reporting wizard you can run
39832 reports on in house usage of items simply by choosing 'Local Use'
39833 from the 'Type' pull down:</para>
39836 <screeninfo>In House Use Stats</screeninfo>
39840 <imagedata fileref="images/reports/inhouse.png"/>
39847 <section id="serialstats">
39848 <title><link linkend="serialstats">Serials Statistics</link></title>
39851 <para>These reports are limited in what data they can look at, so
39852 it's often recommended to use <link linkend="customreports">custom
39853 reports</link> for official end of the year statistics.</para>
39856 <para>Using the form provided, choose how you would like to list the
39857 serials in your system.</para>
39860 <screeninfo>Serials Statistics</screeninfo>
39864 <imagedata fileref="images/reports/serialsform.png"/>
39869 <para>If you choose to output to the browser your results will print
39870 to the screen.</para>
39873 <screeninfo>Serials Results</screeninfo>
39877 <imagedata fileref="images/reports/serialsresults.png"/>
39882 <para>You can also choose to export to a file that you can manipulate
39883 to your needs.</para>
39886 <section id="holdstats">
39887 <title><link linkend="holdstats">Holds Statistics</link></title>
39890 <para>These reports are limited in what data they can look at, so
39891 it's often recommended to use <link linkend="customreports">custom
39892 reports</link> for official end of the year statistics.</para>
39895 <para>Using the form provided you can see statistics for holds placed,
39896 filled, cancelled and more at your library. From the form choose what
39897 value you want to display in the column and what value to show in the
39898 row. You can also choose from the filters on the far right of the
39902 <screeninfo>Hold Statistics Form</screeninfo>
39906 <imagedata fileref="images/reports/holdstatsform.png"/>
39911 <para>If you choose to output to the browser your results will print
39912 to the screen.</para>
39915 <screeninfo>Hold Stats Results</screeninfo>
39919 <imagedata fileref="images/reports/holdstatsresults.png"/>
39924 <para>You can also choose to export to a file that you can manipulate
39925 to your needs.</para>
39928 <section id="mostcheckouts">
39929 <title><link linkend="mostcheckouts">Patrons with the most checkouts</link></title>
39931 <para>This report will simply list the patrons who have the most
39935 <screeninfo>Patrons with the most checkouts form</screeninfo>
39939 <imagedata fileref="images/reports/topcheckoutsform.png"/>
39944 <para>If you choose to output to the browser your results will print
39945 to the screen.</para>
39948 <screeninfo>Top checkouts results</screeninfo>
39952 <imagedata fileref="images/reports/topcheckoutsresult.png"/>
39957 <para>You can also choose to export to a file that you can manipulate
39958 to your needs.</para>
39961 <section id="mostcirculated">
39962 <title><link linkend="mostcirculated">Most Circulated Items</link></title>
39964 <para>This report will simply list the items that have the been
39965 checked out the most.</para>
39968 <screeninfo>Most Circulation Items Form</screeninfo>
39972 <imagedata fileref="images/reports/topcircform.png"/>
39977 <para>If you choose to output to the browser your results will print
39978 to the screen.</para>
39981 <screeninfo>Top Circulation Items Results</screeninfo>
39985 <imagedata fileref="images/reports/topcircresults.png"/>
39990 <para>You can also choose to export to a file that you can manipulate
39991 to your needs.</para>
39994 <section id="patnocheckouts">
39995 <title><link linkend="patnocheckouts">Patrons with no checkouts</link></title>
39997 <para>This report will list for you the patrons in your system who
39998 haven't checked any items out.</para>
40001 <screeninfo>Patrons with no Checkouts</screeninfo>
40005 <imagedata fileref="images/reports/patnocheckout.png"/>
40010 <para>If you choose to output to the browser your results will print
40011 to the screen.</para>
40014 <screeninfo>Results for Patrons with no Checkouts</screeninfo>
40018 <imagedata fileref="images/reports/patnocheckout-results.png"/>
40023 <para>You can also choose to export to a file that you can manipulate
40024 to your needs.</para>
40027 <section id="itemnocheckouts">
40028 <title><link linkend="itemnocheckouts">Items with no checkouts</link></title>
40030 <para>This report will list items in your collection that have never
40031 been checked out.</para>
40034 <screeninfo>Items with No Checkouts</screeninfo>
40038 <imagedata fileref="images/reports/nocheckoutsform.png"/>
40043 <para>If you choose to output to the browser your results will print
40044 to the screen.</para>
40047 <screeninfo>Items with no checkouts results</screeninfo>
40051 <imagedata fileref="images/reports/nocheckoutsresults.png"/>
40056 <para>You can also choose to export to a file that you can manipulate
40057 to your needs.</para>
40060 <section id="catbyitem">
40061 <title><link linkend="catbyitem">Catalog by Item Type</link></title>
40063 <para>This report will list the total number of items of each item
40064 type per branch.</para>
40067 <screeninfo>Catalog by Item Type</screeninfo>
40071 <imagedata fileref="images/reports/itemtotals.png"/>
40076 <para>If you choose to output to the browser your results will print
40077 to the screen.</para>
40080 <screeninfo>Total of Items by Type and Branch</screeninfo>
40084 <imagedata fileref="images/reports/itemtotalsresults.png"/>
40089 <para>You can also choose to export to a file that you can manipulate
40090 to your needs.</para>
40093 <section id="lostreport">
40094 <title><link linkend="lostreport">Lost Items</link></title>
40096 <para>This report will allow you to generate a list of items that have
40097 been marked as Lost within the system</para>
40100 <screeninfo>Lost Items Report</screeninfo>
40104 <imagedata fileref="images/reports/lostitems.png"/>
40110 <section id="avloantime">
40111 <title><link linkend="avloantime">Average Loan Time</link></title>
40113 <para>This report will list the average time items are out on loan
40114 based on the criteria you enter:</para>
40117 <screeninfo>Average Checkout Period Form</screeninfo>
40121 <imagedata fileref="images/reports/averloanform.png"/>
40126 <para>If you choose to output to the browser your results will print
40127 to the screen.</para>
40130 <screeninfo>Average Checkout Period Results</screeninfo>
40134 <imagedata fileref="images/reports/avercheckout.png"/>
40139 <para>You can also choose to export to a file that you can manipulate
40140 to your needs.</para>
40144 <section id="reportdic">
40145 <title><link linkend="reportdic">Report Dictionary</link></title>
40147 <para>The report dictionary is a way to pre-define common filters you'd
40148 like to apply to your reports. This is a good way to add in filters that
40149 the report wizard doesn't include by default. To add a new definition,
40150 or filter, click 'New Definition' on the Reports Dictionary page and
40151 follow the 4 step process.</para>
40153 <para>Step 1: Name the definition and provide a description if
40157 <screeninfo>Create a Definition</screeninfo>
40161 <imagedata fileref="images/reports/dict1.png"/>
40166 <para>Step 2: Choose the module that the will be queried.</para>
40169 <screeninfo>Select Koha Module</screeninfo>
40173 <imagedata fileref="images/reports/dict2.png"/>
40178 <para>Step 3: Choose columns to query from the tables presented.</para>
40181 <screeninfo>Choose columns</screeninfo>
40185 <imagedata fileref="images/reports/dict3.png"/>
40190 <para>Step 4: Choose the value(s) from the field(s). These will be
40191 automatically populated with options available in your database.</para>
40194 <screeninfo>Choose fields and values</screeninfo>
40198 <imagedata fileref="images/reports/dict4.png"/>
40203 <para>Confirm your selections to save the definition.</para>
40206 <screeninfo>Confirm Definition</screeninfo>
40210 <imagedata fileref="images/reports/dictconfirm.png"/>
40215 <para>Your definitions will all appear on the Reports Dictionary
40219 <screeninfo>Reports Dictionary Listing</screeninfo>
40223 <imagedata fileref="images/reports/dictlist.png"/>
40228 <para>Then when generating reports on the module you created the value
40229 for you will see an option to limit by the definition at the bottom of
40230 the usual filters.</para>
40233 <screeninfo>Dictionary Limit Option</screeninfo>
40237 <imagedata fileref="images/reports/dictionarylimit.png"/>
40244 <chapter id="opac">
40245 <title>OPAC</title>
40247 <para>This chapter assumes that you have the following preferences set as
40252 <para><link linkend="opacthemes">opacthemes</link> = bootstrap</para>
40255 <para><link linkend="OPACXSLTResultsDisplay">OPACXSLTResultsDisplay</link> = default</para>
40259 <para><link linkend="OPACXSLTDetailsDisplay">OPACXSLTDetailsDisplay</link> =
40264 <para><link linkend="DisplayOPACiconsXSLT">DisplayOPACiconsXSLT</link>
40269 <para><link linkend="TagsEnabled">TagsEnabled</link> = Allow</para>
40273 <para><link linkend="TagsInputOnDetail">TagsInputOnDetail</link>
40278 <para><link linkend="TagsInputOnList">TagsInputOnList</link> =
40283 <para><link linkend="reviewson">reviewson</link> = Allow</para>
40287 <para><link linkend="ShowReviewer">ShowReviewer</link> = Allow</para>
40291 <para><link linkend="ShowReviewerPhoto">ShowReviewerPhoto</link>
40296 <para><link linkend="OPACFRBRizeEditions">OPACFRBRizeEditions</link> =
40301 <para><link linkend="OPACAmazonCoverImages">OPACAmazonCoverImages</link> =
40306 <para><link linkend="XISBN">XISBN</link> = Use</para>
40310 <para><link linkend="OPACSearchForTitleIn">OPACSearchForTitleIn</link>
40311 = Default set of links</para>
40315 <para><link linkend="OPACShowCheckoutName">OPACShowCheckoutName</link>
40316 = Don't show</para>
40320 <para><link linkend="RequestOnOpac">RequestOnOpac</link> =
40325 <para><link linkend="AutoResumeSuspendedHolds">AutoResumeSuspendedHolds</link> =
40330 <para><link linkend="OpacBrowseResults">OpacBrowseResults</link> =
40335 <para><link linkend="SuspendHoldsOpac">SuspendHoldsOpac</link> =
40340 <para><link linkend="OPACShowBarcode">OPACShowBarcode</link> = Don't show</para>
40343 <para><link linkend="OpacSeparateHoldings">OpacSeparateHoldings</link> = Don't
40347 <para><link linkend="OpacSeparateHoldings">OpacSeparateHoldingsBranch</link> = home
40351 <para><link linkend="DisplayLibraryFacets">DisplayLibraryFacets</link> = holding
40356 <para>If your system preferences are set differently your displays may
40359 <section id="opacsearchresults">
40360 <title><link linkend="opacsearchresults">Search Results</link></title>
40362 <para>To search the OPAC you can either choose to enter your search
40363 words in the box at the top of the OPAC or click on the 'Advanced
40364 Search' link to perform a more detailed search.</para>
40367 <screeninfo>OPAC Search Box</screeninfo>
40371 <imagedata fileref="images/opac/searchbox.png"/>
40376 <para>For more on searching check the '<link linkend="searching">Searching</link>' chapter in this manual.</para>
40378 <section id="opacresultsoverview">
40379 <title><link linkend="opacresultsoverview">Results Overview</link></title>
40381 <para>After performing a search the number of results found for your
40382 search will appear above the results</para>
40385 <screeninfo>Total Results</screeninfo>
40389 <imagedata fileref="images/opac/totalresults-rss.png"/>
40394 <para>By default your search results will be sorted based on your
40395 <link linkend="opacdefaultsort">OPACdefaultSortField and
40396 OPACdefaultSortOrder</link> system preference values. To change this
40397 you can choose another sorting method from the pull down on the
40401 <screeninfo>Results Sorting Options</screeninfo>
40405 <imagedata fileref="images/opac/sortingresults.png"/>
40410 <para>Under each title on your results list a series of values from your leader will appear.
40411 It is important to note that this has nothing to do with the item types or collection
40412 codes you have applied to your records, this data is all pulled from your fixed fields.
40413 This can be turned on or off with the <link linkend="DisplayOPACiconsXSLT">DisplayOPACiconsXSLT</link> system preference.</para>
40416 <screeninfo>Leader Visualization</screeninfo>
40420 <imagedata fileref="images/opac/leader.png"/>
40425 <para>Below each title you will see the availability for the items attached to the record. <note>
40426 <para>Even if you filtered on one library location all locations that hold the item will
40427 appear on the search results.</para>
40429 <para>An item's hold status doesn't not affect whether or not the item is 'available'
40430 until the item is in 'waiting' status. Items with on-shelf holds will show as
40431 available until a librarian has pulled them from the shelf and checked the item in
40432 make it show 'waiting'.</para>
40433 </important></para>
40436 <screeninfo>Holdings Information</screeninfo>
40440 <imagedata fileref="images/opac/holdings-results.png"/>
40445 <para>If you have turned on <link linkend="enhancedcontent">Enhanced
40446 Content</link> preferences you may have book jackets on your search
40450 <screeninfo>Book Jacket on Results</screeninfo>
40454 <imagedata fileref="images/opac/coverresults.png"/>
40458 <para>If you have set your <link linkend="didyoumean">Did you mean?</link> options you will
40459 see a yellow bar across the top of your results will other related searches.</para>
40461 <screeninfo>Did you mean?</screeninfo>
40464 <imagedata fileref="images/opac/didyoumeanopac.png"/>
40468 <para>If you performed an advanced search you see an option to go back and edit your
40469 advanced search blow the list of results pages.<screenshot>
40470 <screeninfo>Return to the last advanced search</screeninfo>
40473 <imagedata fileref="images/opac/editadvanced.png"/>
40476 </screenshot></para>
40479 <section id="opacfilter">
40480 <title><link linkend="opacfilter">Filters</link></title>
40482 <para>To filter your results click on the links below the 'Refine Your
40483 Search' menu on the left of your screen</para>
40486 <screeninfo>Refine Your Results</screeninfo>
40490 <imagedata fileref="images/opac/refineresults.png"/>
40494 <para>Depending on your setting for the <link linkend="DisplayLibraryFacets">DisplayLibraryFacets</link> system preference you will see filters for your home,
40495 holding or both libraries.<screenshot>
40496 <screeninfo>Library Facet</screeninfo>
40499 <imagedata fileref="images/opac/locationfacet.png"/>
40502 </screenshot></para>
40503 <para>After clicking a facet you can remove that filter from your results by clicking the
40504 small 'x' that appears to the right of the facet.<screenshot>
40505 <screeninfo>Remove library facet</screeninfo>
40508 <imagedata fileref="images/opac/removefilter.png"/>
40511 </screenshot></para>
40514 <section id="searchrss">
40515 <title><link linkend="searchrss">Search RSS Feeds</link></title>
40517 <para>You will be able to subscribe to your search results as an RSS
40518 feed by clicking the RSS icon in your address bar or next to the
40519 number of results. To learn more about what RSS feeds are check out
40520 <ulink url="http://www.youtube.com/watch?v=0klgLsSxGsU">this tutorial
40521 video</ulink>.</para>
40524 <screeninfo>RSS Feed Icon</screeninfo>
40528 <imagedata fileref="images/opac/totalresults-rss.png"/>
40533 <para>Subscribing to search results as RSS feeds will allow you to see
40534 when a new item is added to the catalog in your area of
40539 <section id="opacbibrec">
40540 <title><link linkend="opacbibrec">Bibliographic Record</link></title>
40542 <para>When you click on a title from the search results, you're brought
40543 to the bibliographic detail of the record. This page is broken down in
40544 several different areas.</para>
40546 <para>At the top of your screen will be the title and the GMD:</para>
40549 <screeninfo>Title</screeninfo>
40553 <imagedata fileref="images/opac/bibdetail/bibtitle.png"/>
40558 <para>Below the title the authors will be listed. These come from your
40559 1xx and 7xx fields. Clicking the author will run a search for other
40560 titles with that author.</para>
40563 <screeninfo>Author Display</screeninfo>
40567 <imagedata fileref="images/opac/bibdetail/bibauthor.png"/>
40572 <para>If you have an authority file you will see a magnifying glass to
40573 the right of author (and other) authorities. Clicking that magnifying
40574 glass will take you directly to the authority record.</para>
40577 <screeninfo>Authority link</screeninfo>
40581 <imagedata fileref="images/opac/bibdetail/authoritylink.png"/>
40586 <para>If you have your <link linkend="DisplayOPACiconsXSLT">DisplayOPACiconsXSLT</link> preference
40587 set to 'show' you will see a material type that is determined by values
40588 in your fixed fields (learn more in the <link linkend="XSLTiTypes">XSLT
40589 Item Types</link> Appendix).</para>
40592 <screeninfo>XSLT Item Type</screeninfo>
40596 <imagedata fileref="images/opac/bibdetail/bibleader.png"/>
40601 <para>Next you'll see the description of the record you're
40605 <screeninfo>Basic Details</screeninfo>
40609 <imagedata fileref="images/opac/bibdetail/bibdetails.png"/>
40614 <para>Following that information you'll find the subject headings which
40615 can be clicked to search for other titles on similar topics</para>
40618 <screeninfo>Bibliographic Subjects</screeninfo>
40622 <imagedata fileref="images/opac/bibdetail/bibsubjects.png"/>
40627 <para>If your record has a table of contents or summary it will appear
40628 next to the 'Summary' or 'Table of Contents' label</para>
40631 <screeninfo>Summary</screeninfo>
40635 <imagedata fileref="images/opac/bibdetail/bibsummary.png"/>
40640 <para>If your record has data in the 856 fields you'll see the links to
40641 the right of the 'Online Resources' label</para>
40644 <screeninfo>Online Resources</screeninfo>
40648 <imagedata fileref="images/opac/bibdetail/biblinks.png"/>
40653 <para>If the title you're viewing is in a public list then you'll see a
40654 list of those to the right of the 'List(s) this item appears in' label
40655 and if it has tags they will appear below the 'Tags from this library'
40659 <screeninfo>Tags</screeninfo>
40663 <imagedata fileref="images/opac/bibdetail/bibtags.png"/>
40668 <para>In the tabs below the details you will find your holdings
40676 <imagedata fileref="images/opac/bibdetail/bibholdings.png"/>
40681 <para>Any notes (5xx fields) that have been cataloged will appear under
40682 'Title Notes'</para>
40685 <screeninfo>Title notes</screeninfo>
40689 <imagedata fileref="images/opac/bibdetail/bibtitlenotes.png"/>
40694 <para>If you're allowing comments they will appear in the next
40698 <screeninfo>Comments</screeninfo>
40702 <imagedata fileref="images/opac/bibdetail/bibcomments.png"/>
40707 <para>And finally if you have enabled FRBR and you have other editions
40708 of the title in your collection you will see the 'Editions' tab.</para>
40711 <screeninfo>Editions</screeninfo>
40715 <imagedata fileref="images/opac/bibdetail/bibeditions.png"/>
40720 <para>To the right of the details you'll find a series of boxes. The
40721 first box is a list of buttons to help navigate the search results. From
40722 there you can see the next or previous result from your search or return
40723 to the results.</para>
40726 <screeninfo>Search Options</screeninfo>
40730 <imagedata fileref="images/opac/bibdetail/bibsearch.png"/>
40735 <para>Clicking Browse Results at the top of the right column will open
40736 up your search results on the detail page</para>
40739 <screeninfo>Search Results</screeninfo>
40743 <imagedata fileref="images/opac/bibdetail/bibbrowseresults.png"/>
40748 <para>Below the search buttons you'll find the links to place a hold,
40749 print the record, save the record to your lists, or add it to your
40753 <screeninfo>More options</screeninfo>
40757 <imagedata fileref="images/opac/bibdetail/biboptions.png"/>
40762 <para>Clicking 'More Searches' will show the list of libraries you
40763 entered in your <link linkend="OPACSearchForTitleIn">OPACSearchForTitleIn</link>
40767 <screeninfo>More Searches</screeninfo>
40771 <imagedata fileref="images/opac/bibdetail/bibmoresearch.png"/>
40776 <para>Under the 'Save Record' label you will find a series of file
40777 formats you can save the record as. This list can be customized by
40778 altering the <link linkend="OpacExportOptions">OpacExportOptions</link>
40779 system preference.</para>
40782 <screeninfo>Save Record</screeninfo>
40786 <imagedata fileref="images/opac/bibdetail/bibsave.png"/>
40791 <para>If at any time you want to change the view from the 'Normal' view
40792 to see the Marc or the ISBD you can click the tabs across the top of the
40796 <screeninfo>Record Views</screeninfo>
40800 <imagedata fileref="images/opac/bibdetail/bibviews.png"/>
40806 <section id="opaclistscart">
40807 <title><link linkend="opaclistscart">Lists & Cart</link></title>
40809 <para>A cart is a temporary holding place for records you're interested
40810 in finding during this session. That means that once you log out of the
40811 OPAC or close the browser you lose the items in your cart. A list is a
40812 more permanent location for saving items. To learn more about lists,
40813 check the <link linkend="stafflists">Lists in the Staff Client</link>
40814 chapter of this manual.</para>
40816 <section id="opaclists">
40817 <title><link linkend="opaclists">Lists</link></title>
40819 <para>Patrons can manage their own private lists by visiting the 'my
40820 lists' section of their account.</para>
40823 <screeninfo>Lists Management</screeninfo>
40827 <imagedata fileref="images/opac/nolists.png"/>
40832 <section id="opacaddlists">
40833 <title><link linkend="opacaddlists">Creating Lists</link></title>
40835 <para>Lists can also be created by choosing the 'New List' option in
40836 the 'Add to' menu on the search results</para>
40839 <screeninfo>Add to New List</screeninfo>
40843 <imagedata fileref="images/opac/addtonewlist.png"/>
40848 <para>To create a list the patron simply needs to click the 'New
40849 List' link and populate the form that appears</para>
40852 <screeninfo>Create a new list</screeninfo>
40856 <imagedata fileref="images/opac/publiclistpermissions.png"/>
40861 <para>The only field required is the 'List Name,' but the patron can also choose how they
40862 want the list sorted and if the list is public or private.<itemizedlist>
40864 <para>A Private List is managed by you and can be seen only by you (depending on
40865 your permissions settings below)</para>
40868 <para>A Public List can be seen by everybody, but managed only by you (depending on
40869 your permissions settings below)</para>
40871 </itemizedlist><important>
40872 <para>If you aren't allowing patrons to create public lists with the <link linkend="OpacAllowPublicListCreation">OpacAllowPublicListCreation</link>
40873 preference then patrons will only be able to create private lists.</para>
40875 <screeninfo>Create a new private list</screeninfo>
40878 <imagedata fileref="images/opac/newlist.png"/>
40882 </important></para>
40885 <para>Finally decide what your permissions will be on the list. You can all or disallow:<itemizedlist>
40887 <para>anyone else to add entries</para>
40890 <para>anyone to remove his own contributed entries<itemizedlist>
40893 <para>The owner of a list is always allowed to add entries, but needs
40894 permission to remove.</para>
40897 </itemizedlist></para>
40900 <para>anyone to remove other contributed entries </para>
40902 </itemizedlist></para>
40907 <section id="opacaddtolists">
40908 <title><link linkend="opacaddtolists">Adding titles to Lists</link></title>
40910 <para>Titles can be added to lists from the search results and/or
40911 from the bibliographic record. On the search results options to add
40912 items to the list appear below each result and across the top of the
40913 results page</para>
40916 <screeninfo>Add to Lists from Results</screeninfo>
40920 <imagedata fileref="images/opac/addtolistcart.png"/>
40925 <para>To add a single title to a list, click the 'Save to Lists'
40926 option and then choose the list you'd like to add the title to. To
40927 add multiple titles to a list check the boxes on the left of the
40928 titles you want to add and then choose the list you want to add the
40929 titles to from the 'Add too' pull down at the top of the
40933 <section id="listscontent">
40934 <title><link linkend="listscontent">Viewing Lists Contents</link></title>
40936 <para>To view the contents of a list, click on the list name under
40937 the Lists button.</para>
40940 <screeninfo>Lists</screeninfo>
40944 <imagedata fileref="images/opac/chooselist.png"/>
40949 <para>The contents of the list will look similar to your search
40950 results pages except that there will be different menu options
40951 across the top of the list.</para>
40954 <screeninfo>List View</screeninfo>
40958 <imagedata fileref="images/opac/listview.png"/>
40962 <para>To the right of the list title there is an RSS icon that will allow you to subscribe
40963 to updates to the list.</para>
40965 <para>Using the menu options above the list you can place multiple
40966 items on hold, download the list contents, email the list or print
40967 the list out.</para>
40971 <para>To place a hold on one or more list items check the box to
40972 the left of the item and click the 'Place Hold' link at the
40977 <para>To download the list contents click the 'Download List'
40978 link and choose the format you'd like to download the list
40983 <para>To email the list contents to someone, click the 'Send List' link and enter in
40984 your email details in the form that pops up (<link linkend="examplelistemail">view a
40985 sample Lists email</link>)</para>
40988 <screeninfo>Email List Contents</screeninfo>
40992 <imagedata fileref="images/opac/emailist.png"/>
40999 <para>To print the contents of your list out click the 'Print List' link</para>
41004 <section id="opacmanagelists">
41005 <title><link linkend="opacmanagelists">Managing Lists</link></title>
41007 <para>Once the list is saved patrons can begin adding items to it.
41008 From the 'my lists' tab on the patron record the patron can edit and
41009 delete the lists they have created by clicking the appropriate link
41010 to the right of the list name.</para>
41013 <screeninfo>My Lists</screeninfo>
41017 <imagedata fileref="images/opac/mylists.png"/>
41022 <para>To edit the list's title or sorting patrons click the 'Edit'
41023 link to the right of the list description.</para>
41026 <screeninfo>Editing List</screeninfo>
41030 <imagedata fileref="images/opac/editlist.png"/>
41035 <para>When clicking 'Delete' next to a list you will be asked to
41036 confirm that you want to delete the list.</para>
41039 <screeninfo>Delete list confirmation</screeninfo>
41043 <imagedata fileref="images/opac/deletelist.png"/>
41048 <para>The list will not be deleted until the 'Confirm' button is
41049 clicked to the right of the list you'd like to delete.</para>
41051 <para>If the library is allowing you to share private lists with the <link linkend="OpacAllowSharingPrivateLists">OpacAllowSharingPrivateLists</link> preference
41052 then you will see the 'Share' link on your list of lists and the 'Share list' link at
41053 the top of each individual list. Clicking this will ask you to enter the email address
41054 of a patron.<screenshot>
41055 <screeninfo>Share list</screeninfo>
41058 <imagedata fileref="images/opac/sharelist.png"/>
41061 </screenshot></para>
41062 <para>Once the email address is entered Koha will present you with a confirmation message </para>
41064 <screeninfo>Share list confirmation</screeninfo>
41067 <imagedata fileref="images/opac/shareconfirmation.png"/>
41071 <para>and will send a message to that patron.</para>
41075 <section id="opaccart">
41076 <title><link linkend="opaccart">Cart</link></title>
41080 <section id="opacaddtocart">
41081 <title><link linkend="opacaddtocart">Adding titles to the Cart</link></title>
41083 <para>Titles can be added to the cart from the search results and/or
41084 from the bibliographic record. On the search results options to add
41085 items to the cart appear below each result and across the top of the
41086 results page</para>
41089 <screeninfo>Add to Cart on Search Results</screeninfo>
41093 <imagedata fileref="images/opac/addtolistcart.png"/>
41098 <para>Clicking the 'Add to Cart' button will add the one title to
41099 your cart. To add multiple titles at once, check the box to the left
41100 of each result and then choose 'Cart' from the 'Add to' pull down at
41101 the top of the screen. Once titles are added to the cart you will be
41102 presented with a confirmation</para>
41105 <screeninfo>Items added to Cart</screeninfo>
41109 <imagedata fileref="images/opac/addedtocart.png"/>
41113 <para>From the results you will see which items are in your cart and will be able to
41114 remove those items by clicking '(remove)'.<screenshot>
41115 <screeninfo>Item in your cart</screeninfo>
41118 <imagedata fileref="images/opac/iteminyourcart.png"/>
41121 </screenshot></para>
41124 <section id="manageopaccart">
41125 <title><link linkend="manageopaccart">Managing the Cart</link></title>
41127 <para>Once you have titles in your cart you can manage the contents by clicking on the
41128 'Cart' button usually found at the top of the screen. Your cart will open in a new
41132 <screeninfo>Contents of your cart</screeninfo>
41136 <imagedata fileref="images/opac/cartcontents.png"/>
41141 <para>From this window you are presented with several options.
41142 Across the top of the cart are several buttons.</para>
41144 <para>First is the 'More details' button. Clicking this will show you additional
41145 information about the titles in your cart (ISBNs, Subjects, Publisher Info, Notes and more).<screenshot>
41146 <screeninfo>More details in the cart</screeninfo>
41149 <imagedata fileref="images/opac/cartmoredetails.png"/>
41152 </screenshot></para>
41154 <para>Next is the option to send the contents of your cart to an email address. This is
41155 handy if you want to send the resources you found at the library to your home email
41156 account to refer to later or to send to a patron researching a specific topic. Clicking
41157 this link will open up a new window that asks for the email address and message to send.
41158 <link linkend="examplecartemail">View a sample Cart email</link>.</para>
41161 <screeninfo>Email Cart</screeninfo>
41165 <imagedata fileref="images/opac/emailcart.png"/>
41170 <para>The cart can only be emailed by logged in users. This will prevent your cart email
41171 function from being used for spamming.</para>
41174 <para>In addition to sending your cart you can download the contents
41175 of your cart in several pre-defined formats or using a <link linkend="csvprofiles">CSV Profile</link> that you defined in the
41176 Tools module.</para>
41179 <screeninfo>Download Cart</screeninfo>
41183 <imagedata fileref="images/opac/downloadcart.png"/>
41188 <para>Finally you can print out the contents of your cart by
41189 choosing the 'Print' link.</para>
41191 <para>In addition to the various different ways to save the contents
41192 of your cart, there are ways to add value to the data in your cart.
41193 By selecting one or more titles from the cart you can add them to a
41194 list (click 'Add to a List'), place hold(s) (click 'Place hold'), or
41195 tag them (click 'Tag'). All of these operations follow the same
41196 procedure as they do when performing them in the OPAC.</para>
41201 <section id="opacplacehold">
41202 <title><link linkend="opacplacehold">Placing Holds</link></title>
41204 <para>Patrons can place holds on items via the OPAC if they're logged in
41205 and you have the <link linkend="RequestOnOpac">RequestOnOpac</link>
41206 preference set to 'Allow'. If the item can be placed on hold the option
41207 to place it on hold will appear in several different places.</para>
41211 <para>When viewing a list or search results page you'll see the
41212 option to place hold on multiple items by checking the boxes to the
41213 left of the results and clicking 'Place Hold' at the top</para>
41216 <screeninfo>Place Hold from Results</screeninfo>
41220 <imagedata fileref="images/opac/opacplaceholdresults.png"/>
41227 <para>When viewing a list or search results page you'll see the
41228 option to place the item on hold below the basic information about
41232 <screeninfo>Place Hold</screeninfo>
41236 <imagedata fileref="images/opac/opacplaceholdsindiv.png"/>
41243 <para>When viewing an individual title you'll see the option to
41244 place a hold in the box on the right side of the screen</para>
41247 <screeninfo>Place Hold</screeninfo>
41251 <imagedata fileref="images/opac/opacplaceholdsdetail.png"/>
41258 <para>No matter which of the above links you click to place your hold
41259 you'll be brought to the same hold screen.</para>
41262 <screeninfo>Place Hold Form</screeninfo>
41266 <imagedata fileref="images/opac/opacplacehold.png"/>
41273 <para>Check the box to the left of the items you'd like to place on
41278 <para>The title includes a link back to the detail page for the
41283 <para>The priority shows where in the holds queue this hold will
41287 <para>If allowed by your <link linkend="OPACAllowUserToChooseBranch">OPACAllowUserToChooseBranch</link> preference the patron can choose where they'd like
41288 to pick up their hold</para>
41291 <para>If you would like to see more options you can click 'Show more options'</para>
41296 <screeninfo>Place Hold Form with More Options</screeninfo>
41299 <imagedata fileref="images/opac/opacplaceholdmore.png"/>
41306 <para>If you have the <link linkend="AllowHoldItemTypeSelection">AllowHoldItemTypeSelection</link> preference set to 'Allow' and the record had
41307 more than one item type attached you will see an option to choose to limit the hold
41308 to a specific item type<screenshot>
41309 <screeninfo>AllowHoldItemTypeSelection</screeninfo>
41312 <imagedata fileref="images/opac/AllowHoldItemTypeSelection.png"/>
41315 </screenshot></para>
41320 <para>If allowed by your <link linkend="OPACAllowHoldDateInFuture">OPACAllowHoldDateInFuture</link> preference, the 'Hold Starts on Date' column will
41321 show. This field allows the patron to have their hold start on a future date.</para>
41325 <para>By default holds placed in the system remain until canceled,
41326 but if the patron fills in a 'Hold Not Needed After' date then the
41327 hold has an expiration date.</para>
41332 <para>Expired holds are removed by the <link linkend="expiredholdscron">Expired Holds Cron Job</link>, this
41333 is not an automatic process and must be set up by your system
41334 administrator</para>
41341 <para>If allowed by the <link linkend="OpacHoldNotes">OpacHoldNotes</link> preference then
41342 patrons can leave notes about their holds for the library by clicking the 'Edit notes' button</para>
41344 <screeninfo>Hold notes</screeninfo>
41347 <imagedata fileref="images/opac/holdnote.png"/>
41353 <para>Depending on the rules you set regarding item specific holds in your <link linkend="circfinerules">circulation and fines rules</link> the patron will be allowed
41354 to choose whether to place the hold on the next available copy and/or a specific
41357 <screeninfo>Specific Copy Hold</screeninfo>
41360 <imagedata fileref="images/opac/opacplaceholdspecific.png"/>
41367 <para>After clicking the Place Hold button the patron will be brought to
41368 their account page where they'll see all of the items they have on
41372 <section id="opacenhancedcontent">
41373 <title><link linkend="opacenhancedcontent">Enhanced Content</link></title>
41377 <section id="opactagging">
41378 <title><link linkend="opactagging">Tagging</link></title>
41380 <para>Depending on your settings for the <link linkend="TagsEnabled">TagsEnabled</link>, <link linkend="TagsInputOnList">TagsInputOnList</link> and <link linkend="TagsInputOnDetail">TagsInputOnDetail</link> preferences you
41381 may be able to add tags to bibliographic records from the search
41382 results and/or bibliographic records. If you are allowing patrons to
41383 add tags from the search results screen you will see an input box
41384 below each result and a 'Tag' option at the top of the screen.</para>
41387 <screeninfo>Tagging Options on Results</screeninfo>
41391 <imagedata fileref="images/opac/tags-results.png"/>
41396 <para>To add a tag to one item, type the tabs (separated by commas) in
41397 the 'New tag' box and click 'Add'. You will be presented with a
41398 confirmation of your tags being added.</para>
41401 <screeninfo>Tags Added on Results</screeninfo>
41405 <imagedata fileref="images/opac/tagsadded-results.png"/>
41410 <para>From the results you can also tag items in bulk by clicking the
41411 checkboxes on the left and then clicking the 'Tag' button at the top.
41412 After clicking the button it will change into an input box for you to
41413 add tags to all of the items you have selected.</para>
41416 <screeninfo>Add Tags to Multiple Items</screeninfo>
41420 <imagedata fileref="images/opac/tagaddmultiple-results.png"/>
41426 <section id="opaccomments">
41427 <title><link linkend="opaccomments">Comments</link></title>
41429 <para>Patrons can leave comments in the OPAC if you have the <link linkend="reviewson">reviewson</link> preference set to allow this.
41430 Each bibliographic record has a comments tab below the bibliographic
41431 information.</para>
41434 <screeninfo>Comments Tab</screeninfo>
41438 <imagedata fileref="images/opac/commentstab.png"/>
41443 <para>If the patron is logged in they will see a link to add a comment
41444 to the item. Clicking this link will open a pop up window with a box
41445 for their comments.</para>
41448 <screeninfo>Add a Comment</screeninfo>
41452 <imagedata fileref="images/opac/addcomment.png"/>
41457 <para>Once the comment has been typed and the 'Submit' button clicked,
41458 the patron will see their comment as pending and other patrons will
41459 simply see that there are no comments on the item.</para>
41462 <screeninfo>Pending Comment</screeninfo>
41466 <imagedata fileref="images/opac/commentpending.png"/>
41471 <para>Once the comment is approved the patron will see the number of comments on the
41472 'Comments' tab and their comment labeled amongst the other comments. If you have set your
41473 <link linkend="ShowReviewerPhoto">ShowReviewerPhoto</link> preference to 'Show' then
41474 you'll see the patron's photo pulled from the <ulink url="https://www.libravatar.org">Libravatar</ulink> library.</para>
41477 <screeninfo>Your Comments</screeninfo>
41481 <imagedata fileref="images/opac/yourcomment.png"/>
41486 <para>Other patrons will see the comment with the name of the patron
41487 who left the comment (unless you have set the <link linkend="ShowReviewer">ShowReviewer</link> preference to not show
41488 patron names).</para>
41491 <screeninfo>Comment by other patron</screeninfo>
41495 <imagedata fileref="images/opac/commentby.png"/>
41500 <para>If you have your <link linkend="OpacShowRecentComments">OpacShowRecentComments</link>
41501 set to show then you'll see the approved comments on that page.</para>
41504 <screeninfo>Recent Comments List</screeninfo>
41508 <imagedata fileref="images/opac/recentcomments.png"/>
41512 <para>From this page patrons can subscribe to the recent comments using RSS if they would
41516 <section id="zotero">
41517 <title><link linkend="zotero">Zotero</link></title>
41519 <para>Zotero is a Firefox add on that allows for the saving and
41520 generating of a bibliography. Learn more about and download Zotero at
41521 <ulink url="http://zotero.org">http://zotero.org</ulink>.</para>
41523 <para>When on the search results in the Koha OPAC, if you have Zotero
41524 installed, you will see a folder icon in the address bar to the right
41525 of the URL. Clicking that folder will open up a list of titles on the
41526 page for you to pick from to add to Zotero.</para>
41529 <screeninfo>Zotero pop up</screeninfo>
41533 <imagedata fileref="images/opac/zoteroaddressbar.png"/>
41538 <para>Select the titles you want to add to Zotero and then click the
41539 'OK' button. This will add the title to Zotero. You can see the title
41540 by opening your Zotero library.</para>
41543 <screeninfo>Title in the Zotero Library</screeninfo>
41547 <imagedata fileref="images/opac/zoterotitle.png"/>
41553 <section id="customrss">
41554 <title><link linkend="customrss">Custom RSS Feeds</link></title>
41556 <para>Using misc/cronjobs/rss/rss.pl you can generate an RSS feed for
41557 any SQL query (for example a new acquisitions RSS feed). rss.pl is run
41558 on the command line to produce an RSS XML document.</para>
41560 <para>The output should be placed in a directory accessible to the
41561 OPAC (or staff) web interface so that users can download the RSS
41564 <para>An example of usage can be found at: misc/cronjobs/rss.pl
41565 lastAcquired.conf</para>
41567 <para>Normally rss.pl should be run periodically (e.g., daily) to keep
41568 the feed up-to-date.</para>
41570 <para>The configuration file (e.g., lastAcquired.conf) lists</para>
41574 <para>name of the template file to use</para>
41578 <para>path of output file</para>
41582 <para>SQL query</para>
41586 <para>rss.pl runs the SQL query, then feeds the output of the query
41587 through the template to produce the output file.</para>
41590 <para>To use custom RSS feeds you need to turn on the rss.pl cron job.</para>
41591 </important></para>
41594 <section id="selfregistration">
41595 <title><link linkend="selfregistration">OPAC Self Registration</link></title>
41596 <para>If you allow it, patrons can register for their own accounts via the OPAC. If you have
41597 the <link linkend="PatronSelfRegistration">PatronSelfRegistration</link> preference set to
41598 'Allow' then patrons will see a link to register below the log in box on the right of the
41599 main OPAC page.</para>
41601 <screeninfo>Registration link in OPAC</screeninfo>
41604 <imagedata fileref="images/opac/PatronSelfRegistration.png"/>
41608 <para>When the patron clicks the 'Register here' link they will be brough to a registration
41609 page. The options on the registration page can be conrolled by editing the <link linkend="PatronSelfRegistrationBorrowerMandatoryField">PatronSelfRegistrationBorrowerMandatoryField</link> and the <link linkend="PatronSelfRegistrationBorrowerUnwantedField">PatronSelfRegistrationBorrowerUnwantedField</link> preferences.</para>
41611 <screeninfo>Registration form</screeninfo>
41614 <imagedata fileref="images/opac/patronregistration.png"/>
41618 <para>Once the patron has confirmed submitted their registration they will either be sent an
41619 email to confirm their account (if you have the <link linkend="PatronSelfRegistrationVerifyByEmail">PatronSelfRegistrationVerifyByEmail</link>
41620 preference to require this) or presented with their new username and password.</para>
41622 <screeninfo>New account confirmation</screeninfo>
41625 <imagedata fileref="images/opac/patronregistrationcomplete.png"/>
41629 <para>Patrons registered in this way will not have a cardnumber until assigned one by the
41630 library, but will have access to all OPAC functionality immediately. For this reason it is
41631 recommended that you:<itemizedlist>
41633 <para>set up a provisional <link linkend="addingpatroncat">patron category</link> for
41634 self registered patrons (such as 'Self Registered) instead of using an existing patron
41635 category and set that value in the <link linkend="PatronSelfRegistrationDefaultCategory">PatronSelfRegistrationDefaultCategory</link> preference</para>
41638 <para>give this patron category minimal circulation privileges in the <link linkend="circfinerules">Circulation and Fine Rules</link> (such as allowing a couple
41639 holds, but no check outs)</para>
41641 </itemizedlist>That way patrons will either have to come in to the library to verify their
41642 identity before given a cardnumber and the ability to check items out or the library will
41643 have to come up with internal policy on generating cardnumbers before providing them to self
41644 registered patrons. Once this is done the library can change the category to one that is
41645 more appropriate (be it an adult, resident, non resident, student, etc) and add a
41646 cardnumber/barcode.</para>
41649 <section id="opacmyaccount">
41650 <title><link linkend="opacmyaccount">My Account</link></title>
41652 <para>From the OPAC patrons can log in and access their account if you
41653 have set the <link linkend="opacuserlogin">opacuserlogin</link>
41654 preference to 'Allow'. Once logged in patrons are brought to their
41655 account summary. If you would like to get to your account in the OPAC,
41656 you can click on your name in the top right of any page in the
41658 <section id="resetpwopac">
41659 <title><link linkend="resetpwopac">Resetting your password</link></title>
41660 <para>If you have the <link linkend="OpacResetPassword">OpacResetPassword</link> set to
41661 allow patrons to reset their password they can click 'Forgot your password?' link found
41662 under the log in box to reset their passwords.</para>
41664 <screeninfo>'Forgot your password?' link</screeninfo>
41667 <imagedata fileref="images/opac/forgotpwlink.png"/>
41671 <para>Once clicked they will be presented with a form asking for their username and their
41672 email address (patrons must have an email address on file to reset their password).<screenshot>
41673 <screeninfo>Recover password</screeninfo>
41676 <imagedata fileref="images/opac/resetpw.png"/>
41679 </screenshot></para>
41680 <para>The system will then email the patron instructions for resetting their password.<screenshot>
41681 <screeninfo>Reset password confirmation</screeninfo>
41684 <imagedata fileref="images/opac/resetconfirm.png"/>
41687 </screenshot></para>
41690 <section id="opacmysummary">
41691 <title><link linkend="opacmysummary">My Summary</link></title>
41694 <screeninfo>My Summary</screeninfo>
41698 <imagedata fileref="images/opac/myaccount.png"/>
41703 <para>From the 'my summary' tab, patrons will see all of the items
41704 they have checked out with the overdue items highlighted in red. If
41705 you have <link linkend="OpacRenewalAllowed">OpacRenewalAllowed</link>
41706 set to 'Allow' then your patrons will be able to renew their books
41707 right from the OPAC. If you have HTML entered in the <link linkend="OPACMySummaryHTML">OPACMySummaryHTML</link> preference then
41708 you will see that to the right of the 'Fines' column.</para>
41711 <screeninfo>Checked out tab with OPACMySummaryHTML set</screeninfo>
41715 <imagedata fileref="images/opac/opacsummary-wlinks.png"/>
41720 <para id="barcodeattribute">If your patrons would like to see the items barcodes on their
41721 list of checked out items you can set up a <link linkend="patronattributetypes">patron
41722 attribute</link> with the value of SHOW_BCODE and <link linkend="authorizedvalues">authorized value</link> of YES_NO.</para>
41725 <screeninfo>Add SHOW_BCODE patron attribute</screeninfo>
41729 <imagedata fileref="images/opac/SHOW_BCODEadd.png"/>
41734 <para>Then on the <link linkend="editpatrons">patron's record set the
41735 value</link> for SHOW_BCODE to yes.</para>
41738 <screeninfo>Setting value for SHOW_BCODE on patron
41739 record</screeninfo>
41743 <imagedata fileref="images/opac/SHOW_BCODEattribute.png"/>
41748 <para>This will add a column to the check out summary in the OPAC that
41749 shows the patrons the barcodes of the items they have checked
41753 <screeninfo>Barcode number on checkout list in OPAC</screeninfo>
41757 <imagedata fileref="images/opac/barcodeoncheckouts.png"/>
41761 <para>If their guarantee has allowed it via <link linkend="opacmyprivacy">their
41762 privacy</link>, when the guarantor logs in they will see a tab labeled "Relatives'
41763 checkouts" on their summary tab.<screenshot>
41764 <screeninfo>Relatives' checkouts</screeninfo>
41767 <imagedata fileref="images/opac/relativecheckouts.png"/>
41770 </screenshot></para>
41772 <para>Clicking on the 'Overdue' tab will show only the items that are
41776 <screeninfo>Overdue Items</screeninfo>
41780 <imagedata fileref="images/opac/myoverdues.png"/>
41785 <para>The 'Fines' tab will show just a total of what the patron owes.
41786 Clicking on the total will take them to the 'my fines' tab where they
41787 will see a complete breakdown of their fines and bills. If you don't
41788 charge fines at your library you can turn the display of these tabs
41789 off by setting the <link linkend="OPACFinesTab">OPACFinesTab</link>
41790 preference to 'Don't Allow.'</para>
41793 <screeninfo>Patron Fines</screeninfo>
41797 <imagedata fileref="images/opac/myfines.png"/>
41802 <para>Finally, clicking on the 'Holds' tab will show the patron the status of all of the
41803 items they have on hold. </para>
41806 <screeninfo>Patron holds status</screeninfo>
41810 <imagedata fileref="images/opac/myholds.png"/>
41815 <para>Patrons can cancel or suspend (depending on the value of your <link linkend="SuspendHoldsOpac">SuspendHoldsOpac</link> system preference) their own holds if
41816 they are not in transit or already waiting for them. When they click 'Suspend' they will
41817 be presented with the option to choose a date for their hold to resume.<screenshot>
41818 <screeninfo>Suspend until</screeninfo>
41821 <imagedata fileref="images/opac/suspenduntil.png"/>
41824 </screenshot></para>
41825 <para>They can also suspend all of their holds indefinitely or until a specific date if they
41826 choose by filling in the suspend options at the bottom of the page.</para>
41829 <para>If you have your <link linkend="AutoResumeSuspendedHolds">AutoResumeSuspendedHolds</link>
41830 preference set to "Don't allow" then you will not have the option to
41831 put an end date on the hold suspension</para>
41835 <section id="opacmyaccount-flags">
41836 <title><link linkend="opacmyaccount-flags">Patron Flags</link></title>
41838 <para>If you have <link linkend="patronflags">flagged your patron's
41839 account</link> they may see one of the following error messages at the
41840 top of their account.</para>
41844 <para>Card marked as lost</para>
41847 <screeninfo>Library card lost</screeninfo>
41851 <imagedata fileref="images/opac/nocard.png"/>
41858 <para>Patron address in question</para>
41861 <screeninfo>Patron address in question</screeninfo>
41865 <imagedata fileref="images/opac/noaddress.png"/>
41873 <para>this error message will not include a link to the
41874 update form if you have <link linkend="OPACPatronDetails">OPACPatronDetails</link> set to
41875 'Don't allow'</para>
41882 <para>Patron marked restricted</para>
41885 <screeninfo>Patron restricted</screeninfo>
41889 <imagedata fileref="images/opac/debarred.png"/>
41897 <section id="opacmyfines">
41898 <title><link linkend="opacmyfines">My Fines</link></title>
41900 <para>If your library charges fines the next tab on the left is 'my
41901 fines.' Opening this tab will show the patron an entire history of
41902 their accounting at the library.</para>
41905 <screeninfo>Library Fines & Charges</screeninfo>
41909 <imagedata fileref="images/opac/mybilling.png"/>
41913 <para>If you are allowing patrons to pay their fines using PayPal with the <link linkend="EnablePayPalOpacPayments">EnablePayPalOpacPayments</link> preference there will
41914 be checkboxes to the left of each fine with an outstanding amount.<screenshot>
41915 <screeninfo>Fines with checkboxes</screeninfo>
41918 <imagedata fileref="images/opac/finescheckboxes.png"/>
41921 </screenshot></para>
41922 <para>At the bottom the patron will see the option to pay with PayPal for the items they
41923 have checked.</para>
41925 <screeninfo>PayPal Payment</screeninfo>
41928 <imagedata fileref="images/opac/paypaypal.png"/>
41932 <para>After paying they will be presented with a confirmation<screenshot>
41933 <screeninfo>PayPal Confirmation</screeninfo>
41936 <imagedata fileref="images/opac/paypalconfirm.png"/>
41939 </screenshot></para>
41940 <para>And you will see that the fine was paid using PayPal on the staff side.<screenshot>
41941 <screeninfo>Staff side fines</screeninfo>
41944 <imagedata fileref="images/opac/staffpaypal.png"/>
41947 </screenshot></para>
41950 <section id="opacmydetails">
41951 <title><link linkend="opacmydetails">My Details</link></title>
41953 <para>If you have your <link linkend="OPACPatronDetails">OPACPatronDetails</link> preference
41954 set to 'Allow', your patrons will see a form filled in with their contacting information
41955 by clicking on the 'my personal details' tab. You can control what fields patrons see and
41956 can modify via the OPAC by setting the <link linkend="PatronSelfRegistrationBorrowerMandatoryField">PatronSelfRegistrationBorrowerMandatoryField</link>
41957 <link linkend="PatronSelfRegistrationBorrowerUnwantedField">PatronSelfRegistrationBorrowerUnwantedField</link> preferences.</para>
41960 <screeninfo>Patron's personal details</screeninfo>
41964 <imagedata fileref="images/opac/myprofile.png"/>
41969 <para>Patrons can edit their details in this form and click 'Submit Changes' to have their
41970 edits sent to the library for review before their record is updated. Staff will see all
41971 patrons requesting modification to their record listed below the modules on the main
41972 dashboard along with anything else awaiting library attention.</para>
41974 <screeninfo>Patron requests waiting review</screeninfo>
41977 <imagedata fileref="images/opac/patronrequestwaiting.png"/>
41982 <para>If the <link linkend="OPACPatronDetails">OPACPatronDetails</link> preference is set to
41983 'Don't allow' then patrons will simply see their details and a message stating that they
41984 should contact the library for changes.</para>
41987 <screeninfo>Patron's personal details with no edits</screeninfo>
41991 <imagedata fileref="images/opac/myprofile-noedit.png"/>
41997 <section id="opacmytags">
41998 <title><link linkend="opacmytags">My Tags</link></title>
42000 <para>If your library has <link linkend="TagsEnabled">TagsEnabled</link> set to 'Allowed' then the
42001 next tab on the left will be 'my tags.' This tab will show patrons all
42002 of the tags in the system as a cloud and then all of the tags they
42003 have applied in a list format. From here patrons have the ability to
42004 remove tags that they have added if they want.</para>
42007 <screeninfo>Patron's tags</screeninfo>
42011 <imagedata fileref="images/opac/mytags.png"/>
42017 <section id="opacmypassword">
42018 <title><link linkend="opacmypassword">Change My Password</link></title>
42020 <para>Next, if you have <link linkend="OpacPasswordChange">OpacPasswordChange</link> set to 'Allow'
42021 the next tab will be 'change my password,' where patrons can change
42022 their password for logging into the OPAC. Patrons will be presented
42023 with a standard form asking them to enter their old password and then
42024 their new password twice.</para>
42027 <screeninfo>Change my password</screeninfo>
42031 <imagedata fileref="images/opac/mypassword.png"/>
42037 <section id="opacmysearchistory">
42038 <title><link linkend="opacmysearchistory">My Search History</link></title>
42040 <para>If you have your <link linkend="EnableOpacSearchHistory">EnableOpacSearchHistory</link>
42041 preference set to 'Allow' then your patrons can access their search
42042 history via the 'my search history' tab.</para>
42045 <screeninfo>my search history tab</screeninfo>
42049 <imagedata fileref="images/opac/mysearchhistory.png"/>
42054 <para>The search history is a record of all searches run by the
42055 patron. Clicking on any of the search phrases will re-run the search
42056 for the patron. The search history can be deleted by the patron at any
42057 time by clicking the 'Delete your search history' link found at the
42058 top of this tab or by clicking the little red 'x' next to the 'Search
42059 history' link at the top right of the OPAC.</para>
42062 <screeninfo>Search history link at the top right of the
42067 <imagedata fileref="images/opac/searchistory.png"/>
42073 <section id="opacmyhistory">
42074 <title><link linkend="opacmyhistory">My Reading History</link></title>
42076 <para>Depending on your library's setting for <link linkend="opacreadinghistory">opacreadinghistory</link> your patrons
42077 may see the 'my reading history' tab next. This will show the patron
42078 their entire reading history unless they have asked the library to not
42079 keep that information via the 'my privacy' tab which will appear if
42080 you have the <link linkend="OPACPrivacy">OPACPrivacy</link> preference
42081 set to 'Allow.'</para>
42084 <screeninfo>Patron reading history</screeninfo>
42088 <imagedata fileref="images/opac/myhistory.png"/>
42092 <para>If you have HTML entered in the <link linkend="OPACMySummaryHTML">OPACMySummaryHTML</link> preference then you will see that to the right of the 'Date'
42096 <section id="opacmyprivacy">
42097 <title><link linkend="opacmyprivacy">My Privacy</link></title>
42099 <para>The 'my privacy' tab will appear if you have both the <link linkend="opacreadinghistory">opacreadinghistory</link> and the <link linkend="OPACPrivacy">OPACPrivacy</link> preferences set to 'Allow.'
42100 This tab will allow the patrons to decide how the library keeps their
42101 circulation history data.</para>
42104 <screeninfo>my privacy tab</screeninfo>
42108 <imagedata fileref="images/opac/myprivacy.png"/>
42113 <para>The patron can choose from three options:</para>
42117 <para>Forever: keep my reading history without limit. This is the
42118 option for users who want to keep track of what they are
42123 <para>Default: keep my reading history according to local laws.
42124 This is the default option : the library will keep your reading
42125 history for the duration permitted by local laws.</para>
42129 <para>Never: Delete my reading history immediately. This will
42130 delete all record of the item that was checked-out upon
42135 <para>Depending on the patron's suggestions the contents of the '<link linkend="opacmyhistory">my reading history</link>' tab and the '<link linkend="circhistory">Circulation History</link>' tab in the staff
42136 client may change.</para>
42138 <para>Regardless of the patron's choice they can delete their reading
42139 history in bulk at any time by clicking the 'Immediate deletion'
42143 <screeninfo>Delete Circulation History</screeninfo>
42147 <imagedata fileref="images/opac/deletecirchistory.png"/>
42152 <para>Clicking this button will not delete items that are currently checked out, but will
42153 clear the patron's past reading history.<important>
42154 <para>In order for the patron to be able to delete their reading history you must have
42155 the <link linkend="AnonymousPatron">AnonymousPatron</link> preference set.</para>
42156 </important></para>
42157 <para>If you're allowing guarantees to grand permission to their guarantors to view their
42158 current checkouts with the <link linkend="AllowPatronToSetCheckoutsVisibilityForGuarantor">AllowPatronToSetCheckoutsVisibilityForGuarantor</link> preference they will see that
42159 option on this screen.<screenshot>
42160 <screeninfo>AllowPatronToSetCheckoutsVisibilityForGuarantor</screeninfo>
42163 <imagedata fileref="images/opac/AllowPatronToSetCheckoutsVisibilityForGuarantor.png"/>
42166 </screenshot></para>
42167 <para>When the guarantor logs in they will see a tab labeled "Relatives' checkouts" on their
42168 summary tab.<screenshot>
42169 <screeninfo>Relatives' checkouts</screeninfo>
42172 <imagedata fileref="images/opac/relativecheckouts.png"/>
42175 </screenshot></para>
42178 <section id="opacmysuggestions">
42179 <title><link linkend="opacmysuggestions">My Purchase Suggestions</link></title>
42181 <para>If your library allows patrons to make purchase suggestions the
42182 next tab will show all suggestions that the patron made to the library
42183 and their statuses. To disable this tab and the suggestion
42184 functionality set the <link linkend="suggestionspref">suggestion</link> preference to 'Don't
42188 <screeninfo>Patron purchase suggestions</screeninfo>
42192 <imagedata fileref="images/opac/mysuggestions.png"/>
42196 <para>If you have <link linkend="OPACViewOthersSuggestions">OPACViewOthersSuggestions</link>
42197 set to 'Show' then patrons will be able to search suggestions from the top of this
42201 <section id="opacmymsgs">
42202 <title><link linkend="opacmymsgs">My Messaging</link></title>
42204 <para>If your library has the <link linkend="EnhancedMessagingPreferences">EnhancedMessagingPreferences</link> and the <link linkend="EnhancedMessagingPreferencesOPAC">EnhancedMessagingPreferencesOPAC</link>
42205 preferences set to 'Allow' then your patrons will be able to choose which messages they
42206 receive from the library (with the exception of overdue notices which the library
42210 <screeninfo>Patron messaging preferences</screeninfo>
42214 <imagedata fileref="images/opac/mymessages.png"/>
42219 <para>If you use an outside driver for sending text messages set with the <link linkend="SMSSendDriver">SMSSendDriver</link> preference, you will see an additional
42220 column to receive these messages as SMS (or text messages) and a field for a cell (or SMS)
42224 <screeninfo>SMSSendDriver in the OPAC</screeninfo>
42228 <imagedata fileref="images/opac/OPACSMSSendDriver.png"/>
42232 <para>If you are using the Email protocol for sending text messages set with the <link linkend="SMSSendDriver">SMSSendDriver</link> preference, you will see an additional
42233 column to receive these messages as SMS (or text messages), a field for a cell (or SMS)
42234 number, and a pull down listing <link linkend="smsadmin">cellular providers entered in
42235 administration</link>.</para>
42237 <screeninfo>SMSSendDriver in the OPAC</screeninfo>
42240 <imagedata fileref="images/opac/smsopac.png"/>
42244 <para>If you are using the <link linkend="TalkingTechItivaPhoneNotification">Itiva Talking
42245 Tech</link> service you will see an additional column to receive these messages via Phone.<screenshot>
42246 <screeninfo>Phone messaging preferences in the OPAC</screeninfo>
42249 <imagedata fileref="images/opac/opacphonemsg.png"/>
42252 </screenshot></para>
42255 <para>These notices are:</para>
42258 <para>Advanced notice : A notice in advance of the patron's items being due (The
42259 patron can choose the number of days in advance)</para>
42262 <para>Item checkout : A notice that lists all the of the items the patron has just
42263 checked out and/or renewed, this is an electronic form of the checkout
42267 <para>Hold filled : A notice when you have confirmed the hold is waiting for the
42271 <para>Item due : A notice on the day and item is due back at the library</para>
42274 <para>Item check-in : A notice that lists all the of the items the patron has just
42280 <para>Patrons can choose to receive their notices as a digest by checking the 'Digest only?'
42281 box along with the delivery method. A digest is a combination of all the messages of that
42282 type (so all items due in 3 days in one email) in to one email instead of multiple emails
42283 for each alert.</para>
42285 <para>You must choose a delivery method (SMS or Email or Phone) along with 'Digest only?'
42286 if you would like to receive a digest of the messages.</para>
42290 <section id="opacmylists">
42291 <title><link linkend="opacmylists">My Lists</link></title>
42293 <para>Finally, if your library has the <link linkend="virtualshelves">virtualshelves</link> set to 'Allow' then the
42294 last tab will by 'my lists.' From here your patrons can review public
42295 lists and create or edit their own private lists.</para>
42298 <screeninfo>Patron lists</screeninfo>
42302 <imagedata fileref="images/opac/mylists.png"/>
42307 <section id="opacdischarge">
42308 <title><link linkend="opacdischarge">Ask for a Discharge</link></title>
42309 <para>If you have enabled the <link linkend="useDischarge">useDischarge</link> preference
42310 then patrons will be able to request a discharge via the OPAC.<screenshot>
42311 <screeninfo>Discharge tab</screeninfo>
42314 <imagedata fileref="images/opac/dischargetab.png"/>
42317 </screenshot></para>
42318 <para>From here patrons can request a discharge</para>
42320 <screeninfo>Request discharge</screeninfo>
42323 <imagedata fileref="images/opac/dischargeopac.png"/>
42327 <para>And will receive confirmation of their request.</para>
42329 <screeninfo>Discharge confirmation</screeninfo>
42332 <imagedata fileref="images/opac/dischargeopac-confirm.png"/>
42339 <section id="purchasesuggest">
42340 <title><link linkend="purchasesuggest">Purchase Suggestions</link></title>
42342 <para>If your library has the <link linkend="suggestionspref">suggestion</link> preference set to 'Allow'
42343 then patrons will have the option to make purchase suggestions in
42344 several areas in the OPAC.</para>
42346 <para>If you are allowing everyone to see the purchase suggestions made by others with the
42347 <link linkend="OPACViewOthersSuggestions">OPACViewOthersSuggestions</link> preference,
42348 then there will be a link at the top of your OPAC under the search box.</para>
42351 <screeninfo>Purchase Suggestions Link on Search Box</screeninfo>
42355 <imagedata fileref="images/opac/suggestfromsearch.png"/>
42360 <para>There will be a link when the patron finds nothing for their
42364 <screeninfo>Purchase Suggestion Link from Search Results</screeninfo>
42368 <imagedata fileref="images/opac/suggestfromnoresults.png"/>
42373 <para>And there will be a link on the patron's <link linkend="opacmysuggestions">My Purchase Suggestions</link> tab.</para>
42376 <screeninfo>Purchase Suggestion from My Purchase Suggestions
42381 <imagedata fileref="images/opac/suggestfrommyaccount.png"/>
42386 <para>Clicking any one of these links will open the purchase suggestion
42390 <screeninfo>New Purchase Suggestion</screeninfo>
42394 <imagedata fileref="images/opac/newsuggestion.png"/>
42401 <para>From the form on the 'Title' is required by the
42405 <para>The Item type list can be edited by editing the SUGGEST_FORMAT <link linkend="authorizedvalues">authorized value</link>.</para>
42409 <para>If you would like the 'Reason for suggestion' menu shown in
42410 the screenshot above to appear on your suggestions list you need to
42411 add an <link linkend="authorizedvalues">authorized value</link>
42412 category titled 'OPAC_SUG' and include reasons as values in that
42417 <para>If you would like the patron to be able to choose which branch
42418 they are making a suggestion for you need to set the <link linkend="AllowPurchaseSuggestionBranchChoice">AllowPurchaseSuggestionBranchChoice</link>
42419 preference to 'Allow'</para>
42423 <para>Once the form is submitted the data will be saved to the <link linkend="managesuggest">Acquisitions</link> module for the librarians to
42428 <chapter id="searching">
42429 <title>Searching</title>
42433 <section id="searchprefixes">
42434 <title><link linkend="searchprefixes">Advanced Search Prefixes</link></title>
42436 <para>The following prefixes can be added to search terms in the keyword
42437 search box to limit items returned</para>
42441 <para>ti: title search</para>
42445 <para>ex. ti:hamlet</para>
42451 <para>su: subject search</para>
42455 <para>ex. su:cooking</para>
42461 <para>pb: publisher search</para>
42465 <para>ex. pb:penguin</para>
42471 <para>au: author search</para>
42475 <para>ex. au:rowling</para>
42481 <para>su-geo: geographic subjects</para>
42485 <para>ex. su-geo:wales and kw:description and kw:travel</para>
42491 <para>bc: barcode</para>
42495 <para>ex. bc:502326000912</para>
42501 <para>lex: lexile</para>
42505 <para>levels lex:510</para>
42514 <section id="searchguide">
42518 <firstname>Becky</firstname>
42519 <surname>Bell</surname>
42521 <orgname>WALDO</orgname>
42526 <firstname>Nicole C.</firstname>
42527 <surname>Engard</surname>
42528 <contrib>Fixed typos, changed content where necessary and added new
42529 screenshots.</contrib>
42533 <pubdate>October 2008</pubdate>
42535 <title><link linkend="searchguide">Guide to Searching</link></title>
42537 <para>This brief guide will explain a chart that shows a sample of how a
42538 MARC21 database can be configured, as well as a brief introductory
42539 searching guide. The indexing fields described in this document relate
42540 to the bibliographic data and does not address authority database
42543 <section id="searchguide-indexing">
42544 <title><link linkend="searchguide-indexing">Indexing and Searching Description</link></title>
42546 <para>Koha's databases are indexed by the Zebra open-source software.
42547 The overview to the documentation describes Zebra as:</para>
42550 <para>"...Zebra is a high-performance, general-purpose structured
42551 text indexing and retrieval engine. It reads records in a variety of
42552 input formats (eg. email, XML, MARC) and provides access to them
42553 through a powerful combination of Boolean search expressions and
42554 relevance-ranked free-text queries.</para>
42556 <para>Zebra supports large databases (tens of millions of records,
42557 tens of gigabytes of data). It allows safe, incremental database
42558 updates on live systems. Because Zebra supports the
42559 industry-standard information retrieval protocol, Z39.50, you can
42560 search Zebra databases using an enormous variety of programs and
42561 toolkits, both commercial and free, which understands this
42562 protocol..." Zebra - User's Guide and Reference, p. 1, <ulink url="http://www.indexdata.dk/zebra/doc/zebra.pdf">http://www.indexdata.dk/zebra/doc/zebra.pdf</ulink></para>
42565 <para>This brief guide will explain a chart that shows a sample of how
42566 a MARC21 database can be configured, as well as a brief introductory
42567 searching guide. The indexing fields described in this document relate
42568 to the bibliographic data and does not address authority database
42572 <para>The indexing described in this document is the set used by
42573 SouthEastern University. Your local indexing may vary.</para>
42577 <section id="searchguide-indexconfig">
42578 <title><link linkend="searchguide-indexconfig">Indexing Configuration</link></title>
42580 <para>There are three configuration files that Koha uses while
42583 <para>The first configuration file (etc/zebradb/biblios/etc/bib1.att)
42584 contains the Z39.50 bib-1 attribute list, plus the Koha local use
42585 attributes for Biblio Indexes, Items Index, and Fixed Fields and other
42586 special indexes. The Z39.50 Bib-1 profile is made up of several
42587 different types of attributes: Use, Relation, Position, Structure,
42588 Truncation, and Completeness. The bib-1 'Use' attribute is represented
42589 on the chart; the other attributes are used primarily when doing
42590 searches. While there are over 150+ use attributes that could be used
42591 to define your indexing set, it's unlikely that you will choose to use
42592 them all. The attributes you elect to use are those that become the
42593 indexing rules for your database. The other five attribute sets define
42594 the various ways that a search can be further defined, and will not
42595 specifically be addressed in this document. For a complete list of the
42596 standard Bib-1 attributes, go to <ulink url="http://www.loc.gov/z3950/agency/defns/bib1.html">http://www.loc.gov/z3950/agency/defns/bib1.html</ulink>.</para>
42598 <para>The second file is etc/zebradb/marc_defs/[marc21|unimarc]/biblios/record.abs if you
42599 use grs1 indexing [the default until 3.16] or
42600 etc/zebradb/marc_defs/[marc21|unimarc]/biblios/biblio-koha-indexdefs.xml if you use dom
42601 indexing [the default from 3.18]. Either files contains the abstract syntax which maps the
42602 MARC21 tags to the set of Use Attributes you choose to use. To be more precise the xml
42603 file to be activate needs to be transform into biblio-zebra-indexdefs.xsl, read the head
42604 of biblio-zebra-indexdefs.xsl to know more about this topic. The rules established in this
42605 file provides a passable Bath level 0 and 1 service, which includes author, title,
42606 subject, keyword and exact services such as standard identifiers (LCCN, ISBN, ISSN,
42609 <para>The third file (etc/zebradb/ccl.properties) is the Common
42610 Command Language (CCL) field mappings. This file combines the bib-1
42611 attribute set file and the abstract file and adds the qualifiers,
42612 usually known as index names. The qualifiers, or indexes, for this
42613 database are: pn, cpn, cfn, ti, se, ut, nb, ns, sn, lcn, callnum, su,
42614 su-to, su-geo, su-ut, yr,pubdate, acqdate, ln, pl, ab, nt, rtype,
42615 mc-rtype, mus, au, su-na, kw, pb, ctype, and an.</para>
42617 <para>The <link linkend="kohasearchindexes">Koha Indexing Chart</link> summarizes the
42618 contents of all three of these files in a more readable format. The first two columns
42619 labeled Z39.50 attribute and Z39.50 name matches the Z39.50 bib-1 attributes file. The
42620 third column labeled MARC tags indexed is where you find which MARC tags are mapped to an
42621 attribute. The fourth column labeled Qualifiers identifies the search abbreviations used
42622 in the internal CCL query. The following description provides a definition for the word
42623 'qualifiers'.</para>
42625 <para><emphasis>Qualifiers are used to direct the search to a
42626 particular searchable index, such as title (ti) and author indexes
42627 (au). The CCL standard itself doesn't specify a particular set of
42628 qualifiers, but it does suggest a few shorthand notations. You can
42629 customize the CCL parser to support a particular set of qualifiers to
42630 reflect the current target profile. Traditionally, a qualifier would
42631 map to a particular use-attribute within the BIB-1attribute set. It is
42632 also possible to set other attributes, such as the structure
42633 attribute.</emphasis></para>
42635 <para>In the MARC tags indexed column, there are some conventions used
42636 that have specific meanings. They are:</para>
42640 <para>A three digit tag (100) means that all subfields in the tag
42641 can be used in a search query. So, if you enter a search for
42642 'Jackson' as an author, you will retrieve records where Jackson
42643 could be the last name or the first name.</para>
42647 <para>A three digit tag that has a '$' followed by a letter
42648 (600$a) means that a search query will only search the 'a'
42653 <para>A three digit tag that is followed by a ':' and a letter
42654 (240:w) means that a search query can be further qualified. The
42655 letter following the ':' identifies how to conduct the search. The
42656 most common values you'll see are 'w' (word), 'p' (phrase), 's'
42657 (sort), and 'n' (numeric).</para>
42661 <para>The contents of the MARC tags, subfields, and/or fixed field
42662 elements that are listed in this chart are all indexed. You'll see
42663 that every attribute line is not mapped to a specific qualifier
42664 (index)-LC card number, line 9 is one example. However, every indexed
42665 word (a string of characters preceded and succeeded by a space) can be
42666 searched using a keyword (kw) search. So, although an LC card number
42667 specific index doesn't exist, you can still search by the LCCN since
42668 tag 010 is assigned to the LC-card-number attribute. To verify this,
42669 enter 72180055 in the persistent search box. You should retrieve The
42670 gods themselves, by Isaac Asimov.</para>
42672 <para>Examples of fixed field elements indexing can be seen on the
42673 chart between Attribute 8822 and Attribute 8703. These attributes are
42674 most commonly used for limiting. The fixed field attributes currently
42675 represent the BK codes. Other format codes, if needed, could be
42679 <section id="searchguide-basics">
42680 <title><link linkend="searchguide-basics">Basic Searching</link></title>
42682 <para>The search box that library staff and library patrons will see
42683 most often is the persistent search box at the top of the page. Koha
42684 interprets the searches as keyword searches.</para>
42687 <screeninfo>Koha search box</screeninfo>
42691 <imagedata fileref="images/searching/searchbox.png"/>
42696 <para>To start a search, you enter a word or multiple words in the
42697 search box. When a single word is entered, a keyword search is
42698 performed. You can check this out by typing one word into the form and
42699 note the number of results located. Then, repeat the search with a
42700 minor change. In front of the search word, type 'kw=' followed by the
42701 same search term. The results will be identical.</para>
42703 <para>When you have more than one word in the search box, Koha will
42704 still do a keyword search, but a bit differently. Each word will be
42705 searched on its own, then the Boolean connector 'and' will narrow your
42706 search to those items with all words contained in matching
42709 <para>Suppose you want to find material about how libraries are using
42710 mashups. You'll select the major words and enter them into the
42711 persistent search box.</para>
42714 <screeninfo>Keyword Search</screeninfo>
42718 <imagedata fileref="images/searching/searchterms.png"/>
42723 <para>The response to this search is:</para>
42726 <screeninfo>Results</screeninfo>
42730 <imagedata fileref="images/searching/resultssummary.png"/>
42735 <para>The order of the words does not affect the retrieval results, so
42736 you could also enter the search as "mashups library". The response to
42737 this search is results</para>
42740 <screeninfo>Results</screeninfo>
42744 <imagedata fileref="images/searching/resultssummary2.png"/>
42749 <para>Too many words in the search box will find very few matches, as
42750 the following example illustrates:</para>
42753 <screeninfo>No results found</screeninfo>
42757 <imagedata fileref="images/searching/noresults.png"/>
42763 <section id="searchguide-advanced">
42764 <title><link linkend="searchguide-advanced">Advanced Searching</link></title>
42766 <para>When you can't find the most appropriate material with a general
42767 search, you can move to the Advanced Search page by clicking on the
42768 Search option on the persistent toolbar.</para>
42771 <screeninfo>Koha Menu</screeninfo>
42775 <imagedata fileref="images/searching/menubar.png"/>
42780 <para>The Advanced Search page offers many ways to limit the results
42781 of your search. You can search using the Boolean operators AND, OR,
42782 and NOT; limit by item type; limit by year and language; limit by
42783 subtypes audience, content, format, or additional content types; by
42784 location and by availability.</para>
42786 <para>The first limiting section on the Advanced Search page provides
42787 a quick and simple way to use the Boolean operators in your search.
42788 Note that this display depends on a system preference setting. This
42789 option can be found on the Administration > System Preferences >
42790 Searching page. The option called <link linkend="expandedSearchOption">expandedSearchOption</link> must be set
42791 to 'show' to see the following display.</para>
42794 <screeninfo>Advanced Search Options</screeninfo>
42798 <imagedata fileref="images/searching/searchoptions.png"/>
42803 <para>In this section you can choose among the many indexes by
42804 clicking on the arrow in the first box. The blank box that follows is
42805 where you enter your first search term or terms. On the second line,
42806 you can choose the Boolean operator you want to use in your search.
42807 The options are 'and', 'or', and 'not'. Then, you would again choose
42808 the index to search, followed by the second term or terms. If you have
42809 more concepts you want to include in your search, you can click the
42810 [+] to add another line for your search.</para>
42812 <para>A sample search is shown next, followed by its results:</para>
42815 <screeninfo>Advanced Search</screeninfo>
42819 <imagedata fileref="images/searching/advsearch.png"/>
42825 <screeninfo>Results from Advanced Search</screeninfo>
42829 <imagedata fileref="images/searching/numresults.png"/>
42834 <para>When you use the Boolean operators to broaden or narrow a
42835 search, remember the action of each operator. The 'and' operator
42836 narrows the results you'll retrieve because the search will retrieve
42837 the records that include all your search terms. The 'or' operator
42838 expands the results because the search will look for occurrences of
42839 all of your search terms. The 'not' operator excludes records with the
42840 term that follows the operator.</para>
42842 <para>Note: If you leave this <link linkend="expandedSearchOption">expandedSearchOption</link> set to
42843 'don't show', this is the display you will see:</para>
42846 <screeninfo>Fewer Search Options</screeninfo>
42850 <imagedata fileref="images/searching/feweropts.png"/>
42855 <para>The Advanced Search page then shows the multiple kinds of limits
42856 that can be applied to your search results. Either check a box or
42857 select from the drop down menus to narrow your search. You will type
42858 the year, year range, or a 'greater than (>)' or 'less than (<)'
42862 <screeninfo>Other Advanced Search Options</screeninfo>
42866 <imagedata fileref="images/searching/advoptions.png"/>
42871 <para>Finally, you can choose how the results will be sorted. The
42872 pre-defined sort options are in the final area of the Advanced Search
42876 <screeninfo>Sort Results By</screeninfo>
42880 <imagedata fileref="images/searching/advsortby.png"/>
42885 <para>The default sort is by relevance, although you can choose to sort by author, by title,
42886 by call number, by dates, or by popularity (which uses the information on total issues
42887 found in the items table). If you would prefer a different default sort, you can set <link linkend="defaultSortField">defaultSortField</link> to one of the other choices in
42888 Administration > System Preferences > Searching.</para>
42890 <section id="searchguide-itemsearch">
42891 <title><link linkend="searchguide-itemsearch">Item Searching</link></title>
42892 <para>If you are looking for specific items you can use the item search engine in the staff
42893 client to find them. <itemizedlist>
42895 <para><emphasis>Get there:</emphasis> Search > Go to item search</para>
42897 </itemizedlist></para>
42898 <para>At the top of the advanced search page in the staff client you will see a link to 'Go
42899 to item search'<screenshot>
42900 <screeninfo>Item search link</screeninfo>
42903 <imagedata fileref="images/searching/itemsearchlink.png"/>
42906 </screenshot></para>
42907 <para>Clicking that link will open up a item specific search engine.<screenshot>
42908 <screeninfo>Item search</screeninfo>
42911 <imagedata fileref="images/searching/itemsearch.png"/>
42914 </screenshot></para>
42915 <para>Using the search form that is presented you can find a list of specific items that can
42916 be output to the screen or to a CSV file. If your results are printed to the screen you
42917 will have the option to narrow your search further using filters at the top.<screenshot>
42918 <screeninfo>Item search results</screeninfo>
42921 <imagedata fileref="images/searching/itemsearchresults.png"/>
42924 </screenshot></para>
42927 <section id="searchguide-ccl">
42928 <title><link linkend="searchguide-ccl">Common Command Language Searching</link></title>
42930 <para>Koha uses the Common Command Language (CCL) (ISO 8777) as its
42931 internal search protocol. Searches initiated in the graphical
42932 interface use this protocol as well, although the searcher doesn't
42933 know which indexes, operators and limiters are available and being
42934 used to conduct their search. The searcher can use the Advanced Search
42935 when more precise results set are desired and where the search indexes
42936 are somewhat known. However, some library users and many library staff
42937 prefer using a command based structure. This part of the document will
42938 present and explain the use of the Koha command based structure. The
42939 indexes, operators, and limiters used are identical to those used in
42940 the graphical interface.</para>
42942 <section id="searchguide-indexes">
42943 <title><link linkend="searchguide-indexes">Indexes</link></title>
42945 <para>The CCL standard itself doesn't specify a particular set of
42946 qualifiers (indexes), but it does suggest a few short-hand notations
42947 such as 'ti', 'au', and 'su'. Koha has a default set of indexes;
42948 it's possible to customize that set by adding needed indexes based
42949 on local requirements. A qualifier (index) maps to a particular
42950 use-attribute within the Z39.50 BIB-1 attribute set. The complete
42951 Z39.50 Bib-1 Attribute can be viewed at <ulink url="http://www.loc.gov/z3950/agency/defns/bib1.html">http://www.loc.gov/z3950/agency/defns/bib1.html</ulink>.</para>
42953 <para>The standard Koha set of indexes is a fairly common example of
42954 MARC21 indexing rules. The indexes that are defined in Koha are
42955 indexes typically used by other integrated library systems. The
42956 defined Z39.50 Bib-1 Attribute mapped to the indexes include:</para>
42958 <table cellpadding="4" cellspacing="4" frame="all">
42959 <title>Attributes</title>
42961 <tgroup align="left" cols="2" colsep="1" rowsep="1">
42964 <entry>Bib-1 Attribute</entry>
42966 <entry>Qualifier (index)</entry>
42972 <entry>Personal-name</entry>
42978 <entry>Corporate-name</entry>
42984 <entry>Conference-name</entry>
42990 <entry>Title</entry>
42996 <entry>Title-series</entry>
43002 <entry>Title-uniform</entry>
43008 <entry>ISBN</entry>
43014 <entry>ISSN</entry>
43020 <entry>Local number</entry>
43026 <entry>Local-classification</entry>
43028 <entry>lcn and callnum</entry>
43032 <entry>Subject</entry>
43034 <entry>su, su-to, su-geo, su-ut</entry>
43038 <entry>Pubdate</entry>
43040 <entry>yr,pubdate</entry>
43044 <entry>Date-of-Acquisition</entry>
43046 <entry>acqdate</entry>
43050 <entry>Language</entry>
43056 <entry>Place-of-publication</entry>
43062 <entry>Abstract</entry>
43068 <entry>Notes</entry>
43074 <entry>Record-type</entry>
43076 <entry>rtype, mc-rtype, mus</entry>
43080 <entry>Author</entry>
43082 <entry>au, aut</entry>
43086 <entry>Subject-person-name</entry>
43088 <entry>su-na</entry>
43092 <entry>Any (keyword)</entry>
43098 <entry>Publisher</entry>
43104 <entry>Content-type</entry>
43106 <entry>ctype</entry>
43110 <entry>Koha-Auth-Number</entry>
43116 <entry>Author-personal-bibliography</entry>
43122 <entry>Author-in-order</entry>
43130 <para>Refer to the <link linkend="kohasearchindexes">Koha Indexing Chart</link> for the
43131 MARC21 tags mapped to each Bib-1 Attribute and index combination.</para>
43133 <section id="search-audexamp">
43134 <title><link linkend="search-audexamp">Audience Examples</link></title>
43138 <para>aud:a Preschool</para>
43141 <para>aud:b Primary</para>
43144 <para>aud:c Pre-Adolescent</para>
43147 <para>aud:d Adolescent</para>
43151 <para>aud:e Adult</para>
43154 <para>aud:f Specialized</para>
43157 <para>aud:g General</para>
43160 <para>aud:j Juvenile</para>
43165 <section id="search-contentsexamp">
43166 <title><link linkend="search-contentsexamp">Contents Examples</link></title>
43170 <para>fic:1 Fiction</para>
43174 <para>fic:0 Non Fiction</para>
43178 <para>bio:b Biography</para>
43182 <para>mus:j Musical recording</para>
43186 <para>mus:I Non musical record</para>
43192 <section id="searchguide-syntax">
43193 <title><link linkend="searchguide-syntax">Search Syntax</link></title>
43195 <para>In the persistent search box, single words generally retrieve
43196 large sets. To narrow a search, you can use multiple words. Koha
43197 automatically uses the 'and' Boolean operator to create a set of
43198 records matching your input. When you want to narrow the search to
43199 an author or a title or a subject or some other specific field or
43200 use a Boolean operator, there isn't an obvious way to accomplish
43201 that specificity. The library user can, of course, go to the
43202 Advanced Search page; however, if you know how to construct a CCL
43203 search, you can achieve more specificity while using the persistent
43204 search box on any page.</para>
43206 <para>There is a specific order to the CCL search syntax. Although
43207 it can be used for simple searches, it is an especially effective
43208 way to perform complex searches, as it affords you a great deal of
43209 control over your search results. To construct a CCL search, first
43210 enter a desired index code, then an equal sign, followed by your
43211 search word(s). Following are examples of simple CCL
43216 <para>ti=principles of accounting</para>
43220 <para>au=brown joseph</para>
43224 <para>su=poetry</para>
43228 <para>su-na=Shakespeare</para>
43232 <para>kw=marlin</para>
43236 <para>You can refine your search by combining search terms with
43237 Boolean operators 'and', 'or', or 'not'. Following are examples of
43238 searches using Boolean operators.</para>
43242 <para>ti=principles of accounting and au=brown joseph</para>
43246 <para>su=poetry not su-na=Shakespeare</para>
43250 <para>kw=communication and su=debate</para>
43254 <para>You can also choose to search for things that start with a
43255 character or series of characters</para>
43259 <para>ti,first-in-subfield=C (will show you all titles that
43260 start with the letter 'C')</para>
43264 <para>Other string location searches can be performed with the
43265 following keywords:</para>
43269 <para>rtrn : right truncation</para>
43273 <para>ltrn : left truncation</para>
43277 <para>lrtrn : left and right truncation</para>
43281 <para>st-date : type date</para>
43285 <para>st-numeric : type number (integer)</para>
43289 <para>ext : exact search on whole subfield (does not work with
43294 <para>phr : search on phrase anywhere in the subfield</para>
43298 <para>startswithnt : subfield starts with</para>
43302 <para>Using specific indexes and Boolean operators are not the only
43303 way a search can be refined. You can also refine your search as a
43304 phrase when looking for a title, author, or subject. The syntax for
43305 this search is <emphasis>index,phr=search words</emphasis>.</para>
43307 <para>To illustrate the results of various search types, a search
43308 was done for the words 'supreme court'. The results illustrate that
43309 the search index and the word order make a difference in search
43310 results. Only the results count and the search itself is in these
43311 examples. The search executed will always be between the single
43315 <screeninfo>Sample Search 1</screeninfo>
43319 <imagedata fileref="images/searching/ex1.png"/>
43325 <screeninfo>Sample Search 2</screeninfo>
43329 <imagedata fileref="images/searching/ex2.png"/>
43335 <screeninfo>Sample Search 3</screeninfo>
43339 <imagedata fileref="images/searching/ex3.png"/>
43345 <screeninfo>Sample Search 4</screeninfo>
43349 <imagedata fileref="images/searching/ex4.png"/>
43355 <screeninfo>Sample Search 5</screeninfo>
43359 <imagedata fileref="images/searching/ex5.png"/>
43365 <screeninfo>Sample Search 6</screeninfo>
43369 <imagedata fileref="images/searching/ex6.png"/>
43375 <screeninfo>Sample Search 7</screeninfo>
43379 <imagedata fileref="images/searching/ex7.png"/>
43385 <screeninfo>Sample Search 8</screeninfo>
43389 <imagedata fileref="images/searching/ex8.png"/>
43395 <screeninfo>Sample Search 9</screeninfo>
43399 <imagedata fileref="images/searching/ex9.png"/>
43404 <para>You can also choose to use limiters in your search query. Some
43405 common limiters include dates, languages, record types, and item
43406 types. In the Advance Search, you can either click a box or key in
43407 data to limit your search. You can also apply the same limits with
43408 CCL by using the syntax in the following examples. In all</para>
43410 <para><emphasis>By Date: su=supreme court and
43411 yr,st-numeric=>2000</emphasis></para>
43414 <screeninfo>Sample Search 10</screeninfo>
43418 <imagedata fileref="images/searching/ex10.png"/>
43423 <para>When you limit by date, you can use the '>' (greater than),
43424 '<' (less than), '=' (equal), or 'yyyy-yyyy' (range)
43427 <para><emphasis>By Item Type: su=nursing and
43428 itype:BK</emphasis></para>
43431 <screeninfo>Sample Search 11</screeninfo>
43435 <imagedata fileref="images/searching/ex11.png"/>
43440 <para>Each library will have a different set of item types defined
43441 in their circulation configuration. When you set up item types, you
43442 define a code and a name for each one. The name will appear on the
43443 Advance Search page. The code you assigned is used as a CCL search
43444 limit, formatted as 'itype:x', where 'x' is the assigned code. The
43445 initial set of item types in Koha will usually be edited to reflect
43446 your collections, so your item type limiters may be different than
43447 the initial ones. The initial item type limiters follow.</para>
43451 <para>itype:BKS Books, Booklets, Workbooks</para>
43455 <para>itype:SR Audio Cassettes, CDs</para>
43459 <para>itype:IR Binders</para>
43463 <para>itype:CF CD-ROMs, DVD-ROMs, General Online
43468 <para>itype:VR DVDs, VHS</para>
43472 <para>itype:KT Kit</para>
43476 <para>itype:AR Models</para>
43480 <para>itype:SER Serials</para>
43484 <para><emphasis>By format: su=supreme court not
43485 l-format:sr</emphasis></para>
43488 <screeninfo>Sample Search 12</screeninfo>
43492 <imagedata fileref="images/searching/ex12.png"/>
43497 <para>The format limiters are derived from a combination of LDR, 006
43498 and 007 positions. The formats that are currently defined are the
43503 <para>l-format:ta Regular print</para>
43507 <para>l-format:tb Large print</para>
43511 <para>l-format:fk Braille</para>
43515 <para>l-format:sd CD audio</para>
43519 <para>l-format:ss Cassette recording</para>
43523 <para>l-format:vf VHS tape</para>
43527 <para>l-format:vd DVD video</para>
43531 <para>l-format:co CD software</para>
43535 <para>l-format:cr Website</para>
43539 <para><emphasis>By content type: su=supreme court not
43540 ctype:l</emphasis></para>
43543 <screeninfo>Sample Search 13</screeninfo>
43547 <imagedata fileref="images/searching/ex13.png"/>
43552 <para>The content types are taken from the 008 MARC tag, positions
43555 <para>There are two other limiter types that are not described in
43556 this document. They are: Audience and Content. The only difference
43557 in the syntax of the CCL is the actual limiter. They are reproduced
43558 here just in case you would like to use these limiters.</para>
43563 <section id="kohasearchindexes">
43564 <title><link linkend="kohasearchindexes">Koha Search Indexes</link></title>
43566 <para>By default, not all fields are indexed in the Zebra search engine,
43567 but many are. Below are the MARC21 fields that are indexed in
43570 <table cellpadding="4" cellspacing="4" frame="all">
43571 <title>Indexes</title>
43573 <tgroup align="left" cols="2" colsep="1" rowsep="1">
43576 <entry><para>Field</para></entry>
43578 <entry><para>Description</para></entry>
43584 <entry>Leader/06</entry>
43585 <entry>Record-type, rtype</entry>
43588 <entry>Leader/07</entry>
43589 <entry>Bib-level</entry>
43592 <entry>Leader/06-07</entry>
43593 <entry>Material-type</entry>
43596 <entry><para>001</para></entry>
43598 <entry><para>Control-number</para></entry>
43602 <entry><para>005</para></entry>
43604 <entry><para>Date/time-last-modified, dtlm, date-time-last-modified</para></entry>
43608 <entry><para>007</para></entry>
43610 <entry><para>Microform-generation:n:range(data,11,1),
43611 Material-type,ff7-00:w:range(data,0,1),
43612 ff7-01:w:range(data,1,1), ff7-02:w:range(data,2,1),
43613 ff7-01-02:w:range(data,0,2)</para></entry>
43617 <entry><para>008</para></entry>
43619 <entry><para>date-entered-on-file:n:range(data,0,5),
43620 date-entered-on-file:s:range(data,0,5),
43621 pubdate:w:range(data,7,4), pubdate:n:range(data,7,4),
43622 pubdate:y:range(data,7,4), pubdate:s:range(data,7,4),
43623 pl:w:range(data,15,3), ta:w:range(data,22,1),
43624 ff8-23:w:range(data,23,1), ff8-29:w:range(data,29,1),
43625 lf:w:range(data,33,1), bio:w:range(data,34,1),
43626 ln:n:range(data,35,3), ctype:w:range(data,24,4),
43627 Record-source:w:range(data,39,0)</para></entry>
43631 <entry><para>010</para></entry>
43633 <entry><para>LC-card-number, Identifier-standard</para></entry>
43637 <entry><para>011</para></entry>
43639 <entry><para>LC-card-number, Identifier-standard</para></entry>
43643 <entry><para>015</para></entry>
43645 <entry><para>BNB-card-number, BGF-number, Number-db,
43646 Number-natl-biblio, Identifier-standard</para></entry>
43650 <entry><para>017</para></entry>
43652 <entry><para>Number-legal-deposit,
43653 Identifier-standard</para></entry>
43657 <entry><para>018</para></entry>
43659 <entry><para>Identifier-standard</para></entry>
43663 <entry><para>020$a</para></entry>
43665 <entry><para>ISBN:w, Identifier-standard:w</para></entry>
43669 <entry><para>020</para></entry>
43671 <entry><para>Identifier-standard</para></entry>
43675 <entry><para>022$a</para></entry>
43677 <entry><para>ISSN:w, Identifier-standard:w</para></entry>
43681 <entry><para>022</para></entry>
43683 <entry><para>Identifier-standard</para></entry>
43687 <entry><para>023</para></entry>
43689 <entry><para>Identifier-standard</para></entry>
43693 <entry><para>024$a</para></entry>
43695 <entry><para>Identifier-other</para></entry>
43699 <entry><para>024</para></entry>
43701 <entry><para>Identifier-standard</para></entry>
43705 <entry><para>025</para></entry>
43707 <entry><para>Identifier-standard</para></entry>
43711 <entry><para>027</para></entry>
43713 <entry><para>Report-number, Identifier-standard</para></entry>
43717 <entry><para>028</para></entry>
43719 <entry><para>Number-music-publisher,
43720 Identifier-standard</para></entry>
43724 <entry><para>030</para></entry>
43726 <entry><para>CODEN, Identifier-standard</para></entry>
43730 <entry><para>034</para></entry>
43732 <entry><para>Map-scale</para></entry>
43736 <entry><para>037</para></entry>
43738 <entry><para>Identifier-standard, Stock-number</para></entry>
43742 <entry><para>040</para></entry>
43744 <entry><para>Code-institution, Record-source</para></entry>
43747 <entry>041$a</entry>
43748 <entry>ln-audio</entry>
43751 <entry>041$h</entry>
43752 <entry>language-original</entry>
43755 <entry>041$j</entry>
43756 <entry>ln-subtitle</entry>
43760 <entry><para>041</para></entry>
43762 <entry><para>ln</para></entry>
43766 <entry><para>043</para></entry>
43768 <entry><para>Code-geographic</para></entry>
43772 <entry><para>050$b</para></entry>
43774 <entry><para>LC-call-number:w, LC-call-number:p,
43775 LC-call-number:s</para></entry>
43779 <entry><para>050</para></entry>
43781 <entry><para>LC-call-number:w, LC-call-number:p,
43782 LC-call-number:s</para></entry>
43786 <entry><para>052</para></entry>
43788 <entry><para>Geographic-class</para></entry>
43792 <entry><para>060</para></entry>
43794 <entry><para>NLM-call-number</para></entry>
43798 <entry><para>070</para></entry>
43800 <entry><para>NAL-call-number</para></entry>
43804 <entry><para>080</para></entry>
43806 <entry><para>UDC-classification</para></entry>
43810 <entry><para>082</para></entry>
43812 <entry><para>Dewey-classification:w,
43813 Dewey-classification:s</para></entry>
43817 <entry><para>086</para></entry>
43819 <entry><para>Number-govt-pub</para></entry>
43823 <entry><para>100$9</para></entry>
43825 <entry><para>Cross-Reference:w, Koha-Auth-Number</para></entry>
43829 <entry><para>100$a</para></entry>
43831 <entry><para>Author,Author:p, Author:s, Editor,
43832 Author-personal-bibliography, Author-personal-bibliography:p,
43833 Author-personal-bibliography:s</para></entry>
43837 <entry><para>100</para></entry>
43839 <entry><para>Author, Author-title, Author-name-personal, Name,
43840 Name-and-title, Personal-name</para></entry>
43844 <entry><para>110$9</para></entry>
43846 <entry><para>Koha-Auth-Number</para></entry>
43850 <entry><para>110</para></entry>
43852 <entry><para>Author, Author-title, Author-name-corporate, Name,
43853 Name-and-title, Corporate-name</para></entry>
43857 <entry><para>111$9</para></entry>
43859 <entry><para>Koha-Auth-Number</para></entry>
43863 <entry><para>111</para></entry>
43865 <entry><para>Author, Author-title, Author-name-corporate, Name,
43866 Name-and-title, Conference-name</para></entry>
43870 <entry><para>130$n</para></entry>
43872 <entry><para>Thematic-number</para></entry>
43876 <entry><para>130$r</para></entry>
43878 <entry><para>Music-key</para></entry>
43882 <entry><para>130$9</para></entry>
43884 <entry><para>Koha-Auth-Number</para></entry>
43888 <entry><para>130</para></entry>
43890 <entry><para>Title, Title-uniform</para></entry>
43894 <entry><para>210</para></entry>
43896 <entry><para>Title, Title-abbreviated</para></entry>
43900 <entry><para>211</para></entry>
43902 <entry><para>Title, Title-abbreviated</para></entry>
43906 <entry><para>212</para></entry>
43908 <entry><para>Title, Title-other-variant</para></entry>
43912 <entry><para>214</para></entry>
43914 <entry><para>Title, Title-expanded</para></entry>
43918 <entry><para>222</para></entry>
43920 <entry><para>Title, Title-key</para></entry>
43924 <entry><para>240$r</para></entry>
43926 <entry><para>Music-key</para></entry>
43930 <entry><para>240$n</para></entry>
43932 <entry><para>Thematic-number</para></entry>
43936 <entry><para>240</para></entry>
43938 <entry><para>Title:w, Title:p, Title-uniform</para></entry>
43942 <entry><para>243$n</para></entry>
43944 <entry><para>Thematic-number</para></entry>
43948 <entry><para>243$r</para></entry>
43950 <entry><para>Music-key</para></entry>
43954 <entry><para>243</para></entry>
43956 <entry><para>Title:w, Title:p, Title-collective</para></entry>
43960 <entry><para>245$a</para></entry>
43962 <entry><para>Title-cover:w, Title-cover:p, Title-cover:s,
43963 Title:w, Title:p, Title:s</para></entry>
43967 <entry><para>245$c</para></entry>
43969 <entry><para>Author, Author-in-order:w, Author-in-order:p,
43970 Author-in-order:s</para></entry>
43974 <entry><para>245$9</para></entry>
43976 <entry><para>Cross-Reference:w, Koha-Auth-Number</para></entry>
43980 <entry><para>245</para></entry>
43982 <entry><para>Title:w, Title:p</para></entry>
43986 <entry><para>246</para></entry>
43988 <entry><para>Title, Title:p, Title-abbreviated, Title-expanded,
43989 Title-former</para></entry>
43993 <entry><para>247</para></entry>
43995 <entry><para>Title, Title:p, Title-former, Title-other-variant,
43996 Related-periodical</para></entry>
44000 <entry><para>260$a</para></entry>
44002 <entry><para>pl:w, pl:p</para></entry>
44006 <entry><para>260$b</para></entry>
44008 <entry><para>Publisher:w, Publisher:p</para></entry>
44012 <entry><para>260$c</para></entry>
44014 <entry><para>copydate, copydate:s</para></entry>
44018 <entry><para>260</para></entry>
44020 <entry><para>Provider, pl</para></entry>
44024 <entry>Provider</entry>
44028 <entry><para>300</para></entry>
44030 <entry><para>Extent:w, Extent:p</para></entry>
44034 <entry><para>400$a</para></entry>
44036 <entry><para>Name-and-title</para></entry>
44040 <entry><para>400$t</para></entry>
44042 <entry><para>Author-title, Name-and-title, Title,
44043 Title-series</para></entry>
44047 <entry><para>400$9</para></entry>
44049 <entry><para>Koha-Auth-Number</para></entry>
44053 <entry><para>400</para></entry>
44055 <entry><para>Author, Author-name-personal, Name,
44056 Personal-name</para></entry>
44060 <entry><para>410</para></entry>
44062 <entry><para>Author, Corporate-name</para></entry>
44066 <entry><para>410$a</para></entry>
44068 <entry><para>Name-and-title</para></entry>
44072 <entry><para>410$t</para></entry>
44074 <entry><para>Author-title, Title, Title-series</para></entry>
44078 <entry><para>410$9</para></entry>
44080 <entry><para>Koha-Auth-Number</para></entry>
44084 <entry><para>410</para></entry>
44086 <entry><para>Author-name-corporate, Name</para></entry>
44090 <entry><para>411</para></entry>
44092 <entry><para>Author, Conference-name</para></entry>
44096 <entry><para>411$a</para></entry>
44098 <entry><para>Name-and-title</para></entry>
44102 <entry><para>411$t</para></entry>
44104 <entry><para>Author-title, Title-series</para></entry>
44108 <entry><para>411</para></entry>
44110 <entry><para>Author-name-corporate, Name</para></entry>
44114 <entry><para>440$a</para></entry>
44116 <entry><para>Title-series:w, Title-series:p</para></entry>
44120 <entry><para>440$9</para></entry>
44122 <entry><para>Koha-Auth-Number</para></entry>
44126 <entry><para>440</para></entry>
44128 <entry><para>Title-series:w, Title-series:p, Title,
44129 Title-series</para></entry>
44133 <entry><para>490$a</para></entry>
44135 <entry><para>Title-series:w, Title-series:p</para></entry>
44139 <entry><para>490</para></entry>
44141 <entry><para>Title, Title-series</para></entry>
44145 <entry><para>490$9</para></entry>
44147 <entry><para>Koha-Auth-Number</para></entry>
44151 <entry><para>500</para></entry>
44153 <entry><para>Note:w, Note:p</para></entry>
44157 <entry><para>502</para></entry>
44159 <entry><para>Material-type</para></entry>
44163 <entry><para>505$r</para></entry>
44165 <entry><para>Author</para></entry>
44169 <entry><para>505$t</para></entry>
44171 <entry><para>Title</para></entry>
44175 <entry><para>505</para></entry>
44177 <entry><para>Note:w, Note:p</para></entry>
44181 <entry><para>510</para></entry>
44183 <entry><para>Indexed-by</para></entry>
44187 <entry><para>520</para></entry>
44189 <entry><para>Abstract:w, Abstract:p</para></entry>
44193 <entry><para>521$a</para></entry>
44195 <entry><para>lex:n</para></entry>
44199 <entry><para>526$c</para></entry>
44201 <entry><para>arl, arl:n</para></entry>
44205 <entry><para>526$d</para></entry>
44207 <entry><para>arp, arp:n</para></entry>
44211 <entry><para>590</para></entry>
44213 <entry><para>Note:w, Note:p</para></entry>
44217 <entry><para>600$a</para></entry>
44219 <entry><para>Name-and-title, Name, Personal-name,
44220 Subject-name-personal, Subject</para></entry>
44224 <entry><para>600$t</para></entry>
44226 <entry><para>Name-and-title, Title, Subject</para></entry>
44230 <entry><para>600$9</para></entry>
44232 <entry><para>Koha-Auth-Number</para></entry>
44236 <entry><para>600</para></entry>
44238 <entry><para>Name, Personal-name, Subject-name-personal,
44239 Subject</para></entry>
44243 <entry><para>610$a</para></entry>
44245 <entry><para>Name-and-title</para></entry>
44249 <entry><para>610$t</para></entry>
44251 <entry><para>Name-and-title, Title</para></entry>
44255 <entry><para>610$9</para></entry>
44257 <entry><para>Koha-Auth-Number</para></entry>
44261 <entry><para>610</para></entry>
44263 <entry><para>Name, Subject, Corporate-name</para></entry>
44267 <entry><para>611</para></entry>
44269 <entry><para>Conference-name</para></entry>
44273 <entry><para>611$a</para></entry>
44275 <entry><para>Name-and-title</para></entry>
44279 <entry><para>611$t</para></entry>
44281 <entry><para>Name-and-title, Title</para></entry>
44285 <entry><para>611$9</para></entry>
44287 <entry><para>Koha-Auth-Number</para></entry>
44291 <entry><para>611</para></entry>
44293 <entry><para>Name, Subject</para></entry>
44297 <entry><para>630$n</para></entry>
44299 <entry><para>Thematic-number</para></entry>
44303 <entry><para>630$r</para></entry>
44305 <entry><para>Music-key</para></entry>
44309 <entry><para>630$9</para></entry>
44311 <entry><para>Koha-Auth-Number</para></entry>
44315 <entry><para>630</para></entry>
44317 <entry><para>Subject</para></entry>
44321 <entry><para>650$9</para></entry>
44323 <entry><para>Koha-Auth-Number</para></entry>
44327 <entry><para>650</para></entry>
44329 <entry><para>Subject, Subject:p</para></entry>
44333 <entry><para>651$9</para></entry>
44335 <entry><para>Koha-Auth-Number</para></entry>
44339 <entry><para>651</para></entry>
44341 <entry><para>Name-geographic, Subject,Subject:p</para></entry>
44345 <entry><para>652$9</para></entry>
44347 <entry><para>Koha-Auth-Number</para></entry>
44351 <entry><para>653$9</para></entry>
44353 <entry><para>Koha-Auth-Number</para></entry>
44357 <entry><para>653</para></entry>
44359 <entry><para>Subject, Subject:p</para></entry>
44363 <entry><para>654$9</para></entry>
44365 <entry><para>Koha-Auth-Number</para></entry>
44369 <entry><para>654</para></entry>
44371 <entry><para>Subject</para></entry>
44375 <entry><para>655$9</para></entry>
44377 <entry><para>Koha-Auth-Number</para></entry>
44381 <entry><para>655</para></entry>
44383 <entry><para>Subject</para></entry>
44387 <entry><para>656$9</para></entry>
44389 <entry><para>Koha-Auth-Number</para></entry>
44393 <entry><para>656</para></entry>
44395 <entry><para>Subject</para></entry>
44399 <entry><para>657$9</para></entry>
44401 <entry><para>Koha-Auth-Number</para></entry>
44405 <entry><para>657</para></entry>
44407 <entry><para>Subject</para></entry>
44411 <entry><para>690$9</para></entry>
44413 <entry><para>Koha-Auth-Number</para></entry>
44417 <entry><para>690</para></entry>
44419 <entry><para>Subject, Subject:p</para></entry>
44423 <entry><para>700$9</para></entry>
44425 <entry><para>Cross-Reference, Koha-Auth-Number</para></entry>
44429 <entry><para>700$a</para></entry>
44431 <entry><para>Author, Author:p</para></entry>
44435 <entry><para>700$n</para></entry>
44437 <entry><para>Thematic-number</para></entry>
44441 <entry><para>700$r</para></entry>
44443 <entry><para>Music-key</para></entry>
44447 <entry><para>700$t</para></entry>
44449 <entry><para>Author-title, Name-and-title, Title,
44450 Title-uniform</para></entry>
44454 <entry><para>700</para></entry>
44456 <entry><para>Author, Author-name-corporate,
44457 Author-name-personal, Name, Editor, Personal-name</para></entry>
44461 <entry><para>710</para></entry>
44463 <entry><para>Author, Corporate-name</para></entry>
44467 <entry><para>710$t</para></entry>
44469 <entry><para>Author-title, Name-and-title, Title,
44470 Title-uniform</para></entry>
44474 <entry><para>710$a</para></entry>
44476 <entry><para>Name-and-title</para></entry>
44480 <entry><para>710$9</para></entry>
44482 <entry><para>Koha-Auth-Number</para></entry>
44486 <entry><para>710</para></entry>
44488 <entry><para>Author, Name</para></entry>
44492 <entry><para>711$a</para></entry>
44494 <entry><para>Name-and-title</para></entry>
44498 <entry><para>711$t</para></entry>
44500 <entry><para>Author-title, Title, Title-uniform</para></entry>
44504 <entry><para>711$9</para></entry>
44506 <entry><para>Koha-Auth-Number</para></entry>
44510 <entry><para>711</para></entry>
44512 <entry><para>Author-name-corporate, Name,
44513 Conference-name</para></entry>
44517 <entry><para>730$n</para></entry>
44519 <entry><para>Thematic-number</para></entry>
44523 <entry><para>730$r</para></entry>
44525 <entry><para>Music-key</para></entry>
44529 <entry><para>730$9</para></entry>
44531 <entry><para>Koha-Auth-Number</para></entry>
44535 <entry><para>730</para></entry>
44537 <entry><para>Title, Title-uniform</para></entry>
44541 <entry><para>740</para></entry>
44543 <entry><para>Title, Title-other-variant</para></entry>
44547 <entry><para>773$t</para></entry>
44549 <entry><para>Host-item</para></entry>
44553 <entry><para>780$t</para></entry>
44555 <entry><para>Title</para></entry>
44558 <entry>780$w</entry>
44559 <entry>Record-control-number</entry>
44563 <entry><para>780</para></entry>
44565 <entry><para>Title, Title-former,
44566 Related-periodical</para></entry>
44569 <entry>785$w</entry>
44570 <entry>Record-control-number</entry>
44574 <entry><para>785</para></entry>
44576 <entry><para>Related-periodical</para></entry>
44579 <entry>787$w</entry>
44580 <entry>Record-control-number</entry>
44584 <entry><para>800$a</para></entry>
44586 <entry><para>Name-and-title</para></entry>
44590 <entry><para>800$t</para></entry>
44592 <entry><para>Author-title, Name-and-title, Title,
44593 Title-series</para></entry>
44597 <entry><para>800$9</para></entry>
44599 <entry><para>Koha-Auth-Number</para></entry>
44603 <entry><para>800</para></entry>
44605 <entry><para>Author, Author-name-personal, Name,
44606 Personal-name</para></entry>
44610 <entry><para>810$a</para></entry>
44612 <entry><para>Name-and-title</para></entry>
44616 <entry><para>810$t</para></entry>
44618 <entry><para>Author-title, Name-and-title, Title,
44619 Title-series</para></entry>
44623 <entry><para>810$9</para></entry>
44625 <entry><para>Koha-Auth-Number</para></entry>
44629 <entry><para>810</para></entry>
44631 <entry><para>Author, Corporate-name, Author-name-corporate,
44632 Name</para></entry>
44636 <entry><para>811$a</para></entry>
44638 <entry><para>Name-and-title</para></entry>
44642 <entry><para>811$9</para></entry>
44644 <entry><para>Koha-Auth-Number</para></entry>
44648 <entry><para>811$t</para></entry>
44650 <entry><para>Author-title, Name-and-title, Title,
44651 Title-series</para></entry>
44655 <entry><para>811</para></entry>
44657 <entry><para>Author, Author-name-corporate, Name,
44658 Conference-name</para></entry>
44662 <entry><para>830$9</para></entry>
44664 <entry><para>Koha-Auth-Number</para></entry>
44668 <entry><para>830</para></entry>
44670 <entry><para>Title, Title-series</para></entry>
44674 <entry><para>840</para></entry>
44676 <entry><para>Title, Title-series</para></entry>
44680 <entry><para>942$0</para></entry>
44682 <entry><para>totalissues:n, totalissues:s</para></entry>
44686 <entry><para>942$2</para></entry>
44688 <entry><para>cn-bib-source</para></entry>
44692 <entry><para>942$6</para></entry>
44694 <entry><para>cn-bib-sort:n, cn-bib-sort:s</para></entry>
44698 <entry><para>942$c</para></entry>
44700 <entry><para>itemtype:w</para></entry>
44704 <entry><para>942$n</para></entry>
44706 <entry><para>Suppress:w, Suppress:n</para></entry>
44710 <entry><para>942$h</para></entry>
44712 <entry><para>cn-class</para></entry>
44716 <entry><para>942$i</para></entry>
44718 <entry><para>cn-item</para></entry>
44722 <entry><para>942$k</para></entry>
44724 <entry><para>cn-prefix</para></entry>
44728 <entry><para>942$m</para></entry>
44730 <entry><para>cn-suffix</para></entry>
44734 <entry><para>952$0</para></entry>
44736 <entry><para>withdrawn:n, withdrawn:w</para></entry>
44740 <entry><para>952$1</para></entry>
44742 <entry><para>lost, lost:n</para></entry>
44746 <entry><para>952$2</para></entry>
44748 <entry><para>classification-source</para></entry>
44752 <entry><para>952$3</para></entry>
44754 <entry><para>materials-specified</para></entry>
44758 <entry><para>952$4</para></entry>
44760 <entry><para>damaged:n, damaged:w</para></entry>
44764 <entry><para>952$5</para></entry>
44766 <entry><para>restricted:n, restricted:w</para></entry>
44770 <entry><para>952$6</para></entry>
44772 <entry><para>cn-sort:n, cn-sort:s</para></entry>
44776 <entry><para>952$7</para></entry>
44778 <entry><para>notforloan:n, notforloan:w</para></entry>
44782 <entry><para>952$8</para></entry>
44784 <entry><para>ccode</para></entry>
44788 <entry><para>952$9</para></entry>
44790 <entry><para>itemnumber:n, itemnumber:s</para></entry>
44794 <entry><para>952$a</para></entry>
44796 <entry><para>homebranch</para></entry>
44800 <entry><para>952$b</para></entry>
44802 <entry><para>holdingbranch</para></entry>
44806 <entry><para>952$c</para></entry>
44808 <entry><para>location</para></entry>
44812 <entry><para>952$d</para></entry>
44814 <entry><para>Date-of-acquisition, Date-of-acquisition:d,
44815 Date-of-acquisition:s</para></entry>
44819 <entry><para>952$e</para></entry>
44821 <entry><para>acqsource</para></entry>
44825 <entry><para>952$f</para></entry>
44827 <entry><para>coded-location-qualifier</para></entry>
44831 <entry><para>952$g</para></entry>
44833 <entry><para>price</para></entry>
44837 <entry><para>952$j</para></entry>
44839 <entry><para>stack:n, stack:w</para></entry>
44843 <entry><para>952$l</para></entry>
44845 <entry><para>issues:n, issues:w, issues:s</para></entry>
44849 <entry><para>952$m</para></entry>
44851 <entry><para>renewals:n, renewals:w</para></entry>
44855 <entry><para>952$n</para></entry>
44857 <entry><para>reserves:n, reserves:w</para></entry>
44861 <entry><para>952$o</para></entry>
44863 <entry><para>Local-classification:w, Local-classification:p,
44864 Local-classification:s</para></entry>
44868 <entry><para>952$p</para></entry>
44870 <entry><para>barcode, barcode:n</para></entry>
44874 <entry><para>952$q</para></entry>
44876 <entry><para>onloan:n, onloan:w</para></entry>
44880 <entry><para>952$r</para></entry>
44882 <entry><para>datelastseen</para></entry>
44886 <entry><para>952$s</para></entry>
44888 <entry><para>datelastborrowed</para></entry>
44892 <entry><para>952$t</para></entry>
44894 <entry><para>copynumber</para></entry>
44898 <entry><para>952$u</para></entry>
44900 <entry><para>uri:u</para></entry>
44904 <entry><para>952$v</para></entry>
44906 <entry><para>replacementprice</para></entry>
44910 <entry><para>952$w</para></entry>
44912 <entry><para>replacementpricedate</para></entry>
44916 <entry><para>952$y</para></entry>
44918 <entry><para>itype:w</para></entry>
44922 <entry><para>952$z</para></entry>
44924 <entry><para>Note:w, Note:p</para></entry>
44931 <para>Local-Number:n, Local-Number:w, Local-Number:s</para>
44939 <para>biblioitemnumber:n, biblioitemnumber:w, biblioitemnumber:s</para>
44947 <chapter id="pluginsystem">
44948 <title>Plugin System</title>
44949 <para>Koha's Plugin System allows for you to add additional tools and reports to Koha that are
44950 specific to your library. Plugins are installed by uploading KPZ ( Koha Plugin Zip ) packages.
44951 A KPZ file is just a zip file containing the perl files, template files, and any other files
44952 necessary to make the plugin work.</para>
44953 <para>The plugin system needs to be turned on by a system administrator. </para>
44954 <section id="pluginsetup">
44955 <title><link linkend="pluginsetup">Set up</link></title>
44956 <para>To set up the Koha plugin system you must first make some changes to your install.<itemizedlist>
44958 <para>Change <enable_plugins>0</enable_plugins> to
44959 <enable_plugins>1</enable_plugins> in your koha-conf.xml file</para>
44962 <para>Restart your webserver</para>
44964 </itemizedlist>Once set up is complete you will need to alter your <link linkend="UseKohaPlugins">UseKohaPlugins</link> system preference. On the Tools page you
44965 will see the Tools Plugins and on the Reports page you will see the Reports Plugins.</para>
44968 <chapter id="staffsearchhistory">
44969 <title>Search History</title>
44970 <para>If you have your <link linkend="EnableSearchHistory">EnableSearchHistory</link> preference
44971 set to keep your search history then you can access this information by clicking on your
44972 username in the top right of the staff client and choosing 'Search history'.</para>
44974 <screeninfo>Search history</screeninfo>
44977 <imagedata fileref="images/searchhistory/searchhistory.png"/>
44981 <para>From this page you will see your bibliographic search history </para>
44983 <screeninfo>Bibliographic search history</screeninfo>
44986 <imagedata fileref="images/searchhistory/bibsearch.png"/>
44990 <para>And your authority search history.</para>
44992 <screeninfo>Authority search history</screeninfo>
44995 <imagedata fileref="images/searchhistory/authsearch.png"/>
45001 <chapter id="aboutkoha">
45002 <title>About Koha</title>
45004 <para>The 'About Koha' area will give you important server information as
45005 well as general information about Koha.</para>
45009 <para><emphasis>Get there:</emphasis> More > About Koha</para>
45013 <section id="aboutserver">
45014 <title><link linkend="aboutserver">Server Information</link></title>
45016 <para>Under the 'Server Information' tab you will find information about
45017 the Koha version and the machine you have installed Koha on. This
45018 information is very important for debugging problems. When reporting
45019 issues to your support provider or to the various other support avenues
45020 (mailing lists, chat room, etc), it's always good to give the
45021 information from this screen.</para>
45024 <screeninfo>Server Information on Koha</screeninfo>
45028 <imagedata fileref="images/about/aboutserver.png"/>
45034 <section id="aboutserverperl">
45035 <title><link linkend="aboutserverperl">Perl Modules</link></title>
45037 <para>In order to take advantage of all of the functionalities of Koha,
45038 you will need to keep your Perl modules up to date. The 'Perl Modules'
45039 tab will show you all of the modules required by Koha, the version you
45040 have installed and whether you need to upgrade certain modules.</para>
45043 <screeninfo>Perl Modules</screeninfo>
45047 <imagedata fileref="images/about/aboutperlmodules.png"/>
45052 <para>Items listed in bold are required by Koha, items highlighed in red
45053 are missing completely and items highlighted in yellow simply need to be
45057 <section id="aboutsystem">
45058 <title><link linkend="aboutsystem">System Information</link></title>
45060 <para>This tab will provide you with warnings if you are using system
45061 preferences that have since been deprecated or system preferences that
45062 you have set without other required preferences</para>
45065 <screeninfo>System Information</screeninfo>
45069 <imagedata fileref="images/about/systeminfo.jpg"/>
45076 <chapter id="implementation">
45077 <title>Implementation Checklist</title>
45079 <para>The following guide will walk you through the areas of Koha you need
45080 to look at in order to prepare to start using the system.</para>
45082 <section id="imp-migration">
45083 <title><link linkend="imp-migration">Data Migration</link></title>
45085 <para>Before you can start using Koha you'll need to have some data.
45086 This can be done by entering it all by hand, but most people already
45087 have their data in electronic format of some sort and just need to
45088 reformat it a bit for importing into Koha.</para>
45092 <para>Create a list of libraries and enter their info and codes into
45093 <link linkend="libsgroups">Libraries & Groups</link></para>
45097 <para>Define your list of <link linkend="itemtypeadmin">Item
45098 Types</link></para>
45102 <para>Define your patron categories and enter the categories and their codes into <link linkend="patcats">Patron Categories</link></para>
45106 <para>Enter any additional patron information fields you use in your
45107 library in the <link linkend="patronattributetypes">Patron
45108 Attributes</link></para>
45112 <para>Requires that you first set the <link linkend="ExtendedPatronAttributes">ExtendedPatronAttributes</link>
45113 system preference if you have custom fields</para>
45119 <para>Define all of your <link linkend="authorizedvalues">Authorized
45120 Values</link></para>
45124 <para><link linkend="ccode">Collection codes</link></para>
45128 <para><link linkend="shelvelocvals">Shelving
45129 locations</link></para>
45133 <para>Item statuses (<link linkend="lost">lost</link>, <link linkend="notforloan">not
45134 for loan</link>, <link linkend="damageauth">damaged</link>, <link linkend="withdrawnauth">withdrawn</link>)</para>
45138 <para>Plus any others that are needed in your library</para>
45144 <para>Optionally define <link linkend="citytowns">City/State/Postal Code</link> combos </para>
45148 <para><link linkend="kohamarcmapping">Map your bibliographic
45149 data</link> from your legacy system to Koha fields and migrate
45150 (remembering to use the collection, shelving, item type and library
45151 codes you entered in the above setting areas)</para>
45155 <para><link linkend="patronimport">Map your patron data</link> from
45156 your legacy system to the Koha fields and migrate (remembering to
45157 use the patron and library codes you defined above)</para>
45161 <para>Test your migrated data to be sure that everything is as you
45162 expect it to be, some things to test include:</para>
45166 <para>Check some of your titles with diacritics and make sure
45167 that they migrated properly.</para>
45171 <para>Check titles in a series and make sure that series
45172 information migrated properly.</para>
45176 <para>Make sure that your patrons have their contact information
45177 in the right fields.</para>
45181 <para>If your serials data was migrated search for these records
45182 in the catalog and confirm that they look right.</para>
45186 <para>If your serials data was migrated search for these records
45187 in the serials module and confirm that they look right.</para>
45191 <para>Check marc records to verify a variety of items are
45192 cataloged correctly</para>
45196 <para>Check cataloging process to see if all necessary fields
45197 are available</para>
45201 <para>If fines are migrated, check to see that they are applied
45206 <para>If holds are migrated, check to see they are accurate in
45207 catalog and patron record</para>
45214 <section id="impadmin">
45215 <title><link linkend="impadmin">Admin Configuration</link></title>
45217 <para>Most of these preferences won't need to be changed to use your
45218 Koha system, but there are a few that you might want to
45223 <para>If your library uses CAS Authentication, you'll want to set
45224 the various <link linkend="casauthentication">CAS system
45225 preferences</link></para>
45229 <para>Administration System Preferences</para>
45233 <para><link linkend="KohaAdminEmailAddress">KohaAdminEmailAddress</link> :
45234 This is the email address that will be used by the system in
45235 'from' lines and to send errors to if there is no email set for
45240 <para><link linkend="noItemTypeImages">noItemTypeImages</link> :
45241 Decide if you want to show item type icons in the staff client
45246 <para><link linkend="delimiter">delimiter</link> : This value
45247 will be put in between fields when exporting data from
45252 <para><link linkend="virtualshelves">virtualshelves</link> :
45253 Decide if you want the staff and/or patrons to use lists in
45258 <para><link linkend="AutoLocation">AutoLocation</link> : Require
45259 staff to log in to the staff client from a specific IP
45264 <para><link linkend="IndependentBranches">IndependentBranches</link> : Prevent
45265 librarians from editing content that belongs to other branches</para>
45271 <para>Go through the <link linkend="logs">Log System Preferences</link> and decide which
45272 actions you want to keep track of in the logs</para>
45275 <para>Decide if you'd like to share your library's information with the Koha community by
45276 setting the <link linkend="heaprefs">Sharing system preferences</link>.</para>
45279 <para>Decide what <link linkend="cronjobsch">cron jobs</link> you need to run and when.<itemizedlist>
45281 <para>If you're using the long overdue cron job be sure to set your <link linkend="DefaultLongOverdueChargeValue">DefaultLongOverdueChargeValue</link>,
45282 <link linkend="DefaultLongOverdueLostValue">DefaultLongOverdueLostValue</link>
45283 & <link linkend="DefaultLongOverdueLostValue">DefaultLongOverdueDays</link>
45284 preferences.</para>
45286 </itemizedlist></para>
45291 <section id="implocal">
45292 <title><link linkend="implocal">Localization Configuration</link></title>
45294 <para>Koha is used worldwide and so you need to make sure you set your
45295 localization preferences so that options throughout Koha appear properly
45296 for your location/language.</para>
45300 <para>Localization/Internationalization System Preferences</para>
45304 <para><link linkend="dateformat">dateformat</link> : Decide how
45305 dates are displayed throughout Koha</para>
45309 <para><link linkend="opaclanguagesdisplay">opaclanguagesdisplay</link> :
45310 Decide if patrons can choose what language the OPAC appears
45315 <para><link linkend="opaclanguages">opaclanguages</link> :
45316 Decide which languages the patrons can choose from</para>
45322 <para><link linkend="languagepref">language</link> : Decide
45323 which languages appear in the staff client</para>
45327 <para><link linkend="CalendarFirstDayOfWeek">CalendarFirstDayOfWeek</link> :
45328 Define your first day of the week</para>
45335 <section id="impcirc">
45336 <title><link linkend="impcirc">Circulation Configuration</link></title>
45338 <para>Before you start circulating your collection you'll need to set up
45339 your rules and preferences for circulation.</para>
45343 <para>Define your <link linkend="circfinerules">Circulation/Fine rules</link></para>
45347 <para>Enter the <link linkend="calholidays">days your library is
45348 closed</link> for fines and due date calculations</para>
45352 <para>Circulation System Preferences</para>
45356 <para><link linkend="CircControl">CircControl</link> : Define
45357 whether circ rules are based on item's location, patron's
45358 location or transaction location</para>
45362 <para><link linkend="useDaysMode">useDaysMode</link> : Define
45363 how due dates are calculated</para>
45367 <para><link linkend="finesCalendar">finesCalendar</link> :
45368 Define how fines are calculated (for every late date or only for
45369 days the library is open)</para>
45373 <para><link linkend="SpecifyDueDate">SpecifyDueDate</link> : Decide if staff are
45374 allowed to override due dates on checkout</para>
45377 <para><link linkend="SpecifyReturnDate">SpecifyReturnDate</link> : Decide if you want
45378 to let the staff specify an arbitrary return date on checkin</para>
45381 <para><link linkend="itemBarcodeFallbackSearch">itemBarcodeFallbackSearch</link> :
45382 Decide if you want staff to be able to checkout using a keyword search (title, call
45383 number, etc)</para>
45387 <para><link linkend="AutomaticItemReturn">AutomaticItemReturn</link> :
45388 Decide if items are sent back to the owning branch when checked
45393 <para><link linkend="todaysIssuesDefaultSortOrder">todaysIssuesDefaultSortOrder</link>
45394 : Decide how items checked out today display on the patron
45399 <para><link linkend="previousIssuesDefaultSortOrder">previousIssuesDefaultSortOrder</link>
45400 : Decide how items checked out prior to today display on the
45401 patron record</para>
45405 <para><link linkend="noissuescharge">noissuescharge</link> :
45406 Define the maximum amount a patron can owe before checkouts are
45411 <para><link linkend="ReturnBeforeExpiry">ReturnBeforeExpiry</link> : Decide
45412 if patrons need to return items before their accounts
45417 <para><link linkend="AllowHoldsOnDamagedItems">AllowHoldsOnDamagedItems</link>
45418 : Decide if patrons can place holds on items that are marked as
45423 <para><link linkend="AllowHoldPolicyOverride">AllowHoldPolicyOverride</link>
45424 : Decide if you want the staff to be able to override the
45425 setting for the above at checkout</para>
45431 <para><link linkend="maxreserves">maxreserves</link> : Decide
45432 how many items a patron can have on hold at once</para>
45436 <para><link linkend="AllowHoldPolicyOverride">AllowHoldPolicyOverride</link>
45437 : Decide if you want the staff to be able to override the
45438 setting for the above at checkout</para>
45444 <para><link linkend="maxoutstanding">maxoutstanding</link> :
45445 Define the maximum amount a patron can owe before holds are
45450 <para><link linkend="AllowHoldPolicyOverride">AllowHoldPolicyOverride</link>
45451 : Decide if you want the staff to be able to override the
45452 setting for the above at checkout</para>
45458 <para><link linkend="ReservesMaxPickUpDelay">ReservesMaxPickUpDelay</link> :
45459 Define the number of days before a hold expires</para>
45463 <para><link linkend="WebBasedSelfCheck">WebBasedSelfCheck</link>
45464 : Decide if you want to use the built in web-based self-checkout
45469 <para><link linkend="AutoSelfCheckAllowed">AutoSelfCheckAllowed</link> :
45470 Decide if the self-checkout system requires login</para>
45474 <para><link linkend="ShowPatronImageInWebBasedSelfCheck">ShowPatronImageInWebBasedSelfCheck</link>
45475 : Decide if you want patron images to show on the self
45476 checkout screen</para>
45482 <para><link linkend="AllowNotForLoanOverride">AllowNotForLoanOverride</link>
45483 : Decide if you want the staff to be able to checkout items
45484 marked as 'not for loan'</para>
45488 <para><link linkend="AllowRenewalLimitOverride">AllowRenewalLimitOverride</link>
45489 : Decide if you want staff to override the limit put on
45494 <para><link linkend="AllowFineOverride">AllowFineOverride</link> : Decide if you want
45495 staff to be able to override fine limits</para>
45498 <para><link linkend="AllowTooManyOverride">AllowTooManyOverride</link> : Descide if
45499 you want staff to be able to check out more than the limit to a patron</para>
45503 <para><link linkend="RenewalPeriodBase">RenewalPeriodBase</link>
45504 : Decide what date renewals are based on</para>
45508 <para><link linkend="finesMode">finesMode</link> : Switch to
45509 'Calculate and Charge' before go live if you charge fines</para>
45513 <para><link linkend="OverdueNoticeBcc">OverdueNoticeBcc</link> :
45514 If you want to receive a copy of every overdue notice sent out,
45515 enter your email address here</para>
45519 <para><link linkend="emailLibrarianWhenHoldIsPlaced">emailLibrarianWhenHoldIsPlaced</link>
45520 : Decide if you want an email every time a hold is placed</para>
45524 <para><link linkend="ReservesControlBranch">ReservesControlBranch</link> :
45525 Decide which branch's hold rules are considered first</para>
45529 <para><link linkend="AudioAlerts">soundon</link> : Decide if you want to have sounds
45530 on for circulation actions</para>
45534 <para><link linkend="FilterBeforeOverdueReport">FilterBeforeOverdueReport</link>
45535 : If you have a large amount of overdues, you might want to turn
45536 this preference on so as to allow you to filter before results
45541 <para><link linkend="DisplayClearScreenButton">DisplayClearScreenButton</link>
45542 : If you have a lot of staff members sharing one circ computer
45543 you might want to enable this so that staff can clear the screen
45544 in between checkouts to protect patron's privacy</para>
45548 <para><link linkend="CircAutoPrintQuickSlip">CircAutoPrintQuickSlip</link> :
45549 Decide how you want Koha to react if you scan in a blank barcode
45550 on the checkout screen</para>
45554 <para><link linkend="SuspendHoldsIntranet">SuspendHoldsIntranet</link>
45555 and/or <link linkend="SuspendHoldsOpac">SuspendHoldsOpac</link>
45556 : Decide if you want patrons and/or staff to be able to suspend
45561 <para><link linkend="AutoResumeSuspendedHolds">AutoResumeSuspendedHolds</link>
45562 : If you allow holds to be suspended decide if you want them
45563 to automatically resume on the date entered by the staff
45564 and/or patron</para>
45569 <para><link linkend="OnSiteCheckouts">OnSiteCheckouts</link> : Decide if you want to
45570 allow items to be checked out for use within the library</para>
45573 <para><link linkend="RecordLocalUseOnReturn">RecordLocalUseOnReturn</link> : Set this
45574 to record local use of items when you check them in</para>
45580 <para>Customize your <link linkend="notices">Notices &
45581 Slips</link></para>
45585 <para>Define your <link linkend="noticetriggers">Overdue Notice
45586 Triggers</link></para>
45590 <para>Set up your <link linkend="cronjobs">cron jobs</link></para>
45594 <para>Populate <link linkend="buildholdscron">your holds
45595 queue</link> (every 1-4 hours)</para>
45599 <para>Decide <link linkend="expiredholdscron">when holds
45600 expire</link> (daily)</para>
45604 <para><link linkend="finescronjob">Calculate fines due</link>
45609 <para>Fines on hourly loans will calculate when you check
45610 the items in</para>
45616 <para><link linkend="longoverduecron">Mark long overdue items as
45617 lost</link> (daily)</para>
45621 <para>Decide when the system <link linkend="msgqueuecron">sends
45622 out messages</link> (1-4 hours)</para>
45626 <para>Decide when the system <link linkend="overduenoticecron">queues overdue notices</link>
45631 <para>Set up <link linkend="printholdcron">hold notices that
45632 didn't send for printing</link> (daily after overdues and
45633 message queue)</para>
45637 <para>Decide when the system <link linkend="advnoticecron">queues the advanced notice of items
45638 due</link> (daily)</para>
45642 <para>Find holds that need to be <link linkend="unsuspendholdcron">resumed and remove
45643 suspension</link> (daily)</para>
45646 <para>If you're allowing automatic renewal of items <link linkend="autorenewcron">set
45647 them to renew</link> (nightly)</para>
45654 <section id="imppratrons">
45655 <title><link linkend="imppratrons">Patron Configuration</link></title>
45657 <para>You have already imported patron data from your old system, but
45658 there are plenty of options available to you regarding patrons and their
45663 <para>Enter your <link linkend="addstaffpatron">staff members as
45664 patrons</link></para>
45668 <para>Define <link linkend="patronpermissions">staff members
45669 access permissions</link></para>
45675 <para>Patron System Preferences</para>
45680 <para><link linkend="autoMemberNum">autoMemberNum</link> :
45681 Decide if the patrons barcodes are auto-generated or if you
45682 enter them yourself</para>
45686 <para><link linkend="MaxFine">MaxFine</link> : Determine the
45687 maximum amount that people can owe in fines</para>
45691 <para><link linkend="NotifyBorrowerDeparture">NotifyBorrowerDeparture</link>
45692 : Decide when to warn staff that the patron account is about to
45697 <para><link linkend="intranetreadinghistory">intranetreadinghistory</link> :
45698 Decide if the staff can see the patron's reading/checkout
45703 <para><link linkend="BorrowerMandatoryField">BorrowerMandatoryField</link> :
45704 List fields that you want to appear as mandatory on the patron
45705 add/edit form</para>
45709 <para><link linkend="BorrowersTitles">BorrowersTitles</link> :
45710 Add or change the titles for your patrons</para>
45714 <para><link linkend="borrowerRelationship">borrowerRelationship</link> : Add
45715 or change borrower relationships (child to adult and
45716 professional to organization)</para>
45720 <para><link linkend="AutoEmailPrimaryAddress">AutoEmailPrimaryAddress</link>
45721 : Determine if the patrons get an email confirming the creation
45722 of their account</para>
45726 <para><link linkend="EnhancedMessagingPreferences">EnhancedMessagingPreferences</link>
45727 : Decide if staff can choose from a series of notices (other than overdues) for
45731 <para><link linkend="EnhancedMessagingPreferencesOPAC">EnhancedMessagingPreferencesOPAC</link>: Decide if patrons can choose from a
45732 series of notices (other than ovedues) for themselves</para>
45736 <para><link linkend="patronimages">patronimages</link> : Decide
45737 if you want to save patron images in your system</para>
45741 <para><link linkend="ExtendedPatronAttributes">ExtendedPatronAttributes</link>
45742 : Decide if you want to enable custom patron fields</para>
45746 <para><link linkend="minPasswordLength">minPasswordLength</link>
45747 : Enter the minimum number of characters you want passwords to
45752 <para><link linkend="BorrowerUnwantedField">BorrowerUnwantedField</link> :
45753 Decide what fields your library doesn't need to see on the
45754 patron entry form</para>
45759 <para>Set up your <link linkend="cronjobs">cron jobs</link><itemizedlist>
45761 <para>Decide if you would like <link linkend="j2acron">children to automatically be
45762 come adults</link></para>
45764 </itemizedlist></para>
45769 <section id="impcatalog">
45770 <title><link linkend="impcatalog">Cataloging Configuration</link></title>
45772 <para>Before you start cataloging in Koha you'll want to set up your
45773 preferences and other rules.</para>
45777 <para>Define your cataloging templates aka <link linkend="marcbibframeworks">MARC Bibliographic
45778 Frameworks</link></para>
45782 <para>Run the <link linkend="marcbibframeworkstest">MARC
45783 Bibliographic Framework Test</link> to be sure your changes are
45790 <para>Define any <link linkend="authorizedvalues">authorized
45791 values</link> you might want to use in cataloging</para>
45795 <para>Set up <link linkend="classificationsources">custom
45796 classification sources</link> (if you use something other than the
45801 <para>Set up <link linkend="recordmatchingrules">MARC matching rules</link> for importing
45802 records from mrc files or Z39.50</para>
45806 <para>Set up <link linkend="keywordmapping">Koha to Keyword
45807 mapping</link> for deciding how to display marc fields to the screen
45808 (still in beta - only one field)</para>
45812 <para>Set up the <link linkend="z3950admin">Z39.50 targets</link> you want to search for
45813 cataloging (and acquisitions)</para>
45817 <para>Cataloging System Preferences</para>
45821 <para><link linkend="URLLinkText">URLLinkText</link> : Enter
45822 text to display when 856 fields do not have pre-defined
45827 <para><link linkend="hide_marc">hide_marc</link> : If you are
45828 unfamiliar with MARC you can have the MARC fields number
45833 <para><link linkend="LabelMARCView">LabelMARCView</link> :
45834 Choose how you want duplicate fields to appear on the
45839 <para><link linkend="DefaultClassificationSource">DefaultClassificationSource</link>
45840 : Choose which classification source is the default in your
45845 <para><link linkend="advancedMARCeditor">advancedMARCeditor</link> : Decide
45846 if you need labels to appear on your MARC editor</para>
45850 <para><link linkend="marcflavour">marcflavour</link> : Choose
45851 your MARC format</para>
45855 <para><link linkend="itemcallnumber">itemcallnumber</link> :
45856 Enter which field and subfields to look into for the call
45861 <para><link linkend="MARCOrgCode">MARCOrgCode</link> : Enter
45862 your MARC Organizational Code (not the same as your OCLC
45867 <para><link linkend="autoBarcode">autoBarcode</link> : Decide if
45868 Koha generates item barcodes for you</para>
45872 <para><link linkend="OpacSuppression">OpacSuppression</link> :
45873 Decide if you want to hide items marked as suppressed from the
45874 OPAC search results</para>
45880 <para>Set up your <link linkend="cronjobs">cron jobs</link></para>
45884 <para>Decide when the system <link linkend="checkurlcron">checks
45885 URLs in catalog records</link> to see if they are still
45893 <section id="impauthorities">
45894 <title><link linkend="impauthorities">Authorities Configuration</link></title>
45896 <para>Koha has the ability to keep track of your authority records and
45897 how they're linked to your bibliographic records. Before using
45898 authorities you should configure several preferences.</para>
45902 <para>Set <link linkend="authoritiesadmin">Authority
45903 Frameworks</link> aka templates</para>
45907 <para>Authority System Preferences</para>
45911 <para><link linkend="BiblioAddsAuthorities">BiblioAddsAuthorities</link> :
45912 Decide if Koha creates authorities when cataloging</para>
45916 <para><link linkend="dontmerge">dontmerge</link> : Decide if
45917 updates to authorities trigger updates to the bibliographic
45918 records that link to them</para>
45922 <para><link linkend="AutoCreateAuthorities">AutoCreateAuthorities</link> :
45923 Decide when authorities are created</para>
45927 <para><link linkend="LinkerModule">LinkerModule</link> : Decide
45928 which match the authority linker should use</para>
45932 <para><link linkend="LinkerOptions">LinkerOptions</link> :
45933 Decide if you want authority linking to be broader or more
45938 <para><link linkend="CatalogModuleRelink">CatalogModuleRelink</link> :
45939 Decide if you want to enable authority linking while
45946 <para>Set up your <link linkend="cronjobs">cron jobs</link></para>
45950 <para>Choose when the system looks for authorities updates to
45951 <link linkend="mergeauthcron">merge changes into bibliographic
45952 records</link></para>
45959 <section id="impsearching">
45960 <title><link linkend="impsearching">Searching Configuration</link></title>
45962 <para>There are several system preferences related to searching, it is
45963 not always recommended to make too many changes to these preferences
45964 since they are set to get you the most relevant results. If you would
45965 like to change the default way that Koha handles searching, view the
45966 <link linkend="searchingprefs">Searching system preferences</link>
45971 <para>Set up your <link linkend="cronjobs">cron jobs</link></para>
45975 <para>Decide how often your <link linkend="rebuildsearchcron">system rebuilds the search
45976 index</link> (4-10 min)</para>
45982 <para>Searching System Preferences</para>
45986 <para><link linkend="AdvancedSearchTypes">AdvancedSearchTypes</link> : Decide which
45987 authorized value fields you want patrons and staff to be able to limit their
45988 advanced searches by</para>
45991 <para><link linkend="AdvancedSearchLanguages">AdvancedSearchLanguages</link> : Decide
45992 which languages you want people to be able to limit to via the search engine</para>
45996 <para><link linkend="UseAuthoritiesForTracings">UseAuthoritiesForTracings</link>
45997 : Decide how you want Koha to handle subject searches in the
46002 <para><link linkend="TraceCompleteSubfields">TraceCompleteSubfields</link>
46003 : Decide how you want Koha to handle subject searches in the
46008 <para><link linkend="TraceSubjectSubdivisions">TraceSubjectSubdivisions</link>
46009 : Decide how you want Koha to handle subject searches in the
46016 <para><link linkend="displayFacetCount">displayFacetCount</link>
46017 : Decide whether to show facet counts on search results</para>
46024 <section id="impopac">
46025 <title><link linkend="impopac">OPAC Configuration</link></title>
46027 <para>There are a lot of ways you can customize your OPAC in
46032 <para>Decide how you want your OPAC to look & what content you
46033 want on the main page</para>
46037 <para>Create a library branded stylesheet using CSS</para>
46042 <para>Do not edit the default CSS files, instead create a new
46043 one, that way the system can always fall back on the original
46051 <para>Create a custom XSLT stylesheet to change the way search
46052 results and bib records appear in the OPAC</para>
46056 <para>OPAC System preferences</para>
46060 <para><link linkend="OPACBaseURL">OPACBaseURL</link> : Enter your library's url
46064 <para><link linkend="opacuserlogin">opacuserlogin</link> : Decide if you want to allow
46065 patrons to login to the OPAC to access customized functionality (searching will be
46066 allowed without logging in)</para>
46069 <para><link linkend="RequestOnOpac">RequestOnOpac</link> : Decide if patrons can
46070 place holds via the OPAC</para>
46073 <para><link linkend="OpacPasswordChange">OpacPasswordChange</link> : Decide if
46074 patrons can change their password (don't allow this if you're using LDAP)</para>
46077 <para><link linkend="OpacRenewalAllowed">OpacRenewalAllowed</link> : Decide if
46078 patrons can renew their checked out items via the OPAC</para>
46081 <para><link linkend="opacreadinghistory">opacreadinghistory</link> : Decide if
46082 patrons can view their reading/checkout history via the OPAC</para>
46085 <para><link linkend="reviewson">reviewson</link> : Decide if you want to allow
46086 patrons to comment on bib records via the OPAC</para>
46089 <para><link linkend="OpacStarRatings">OpacStarRatings</link> : Decide if patrons
46090 can leave star ratings</para>
46093 <para><link linkend="virtualshelves">virtualshelves</link> : Decide if you want
46094 patrons to be able to create Lists</para>
46097 <para><link linkend="OpacAllowPublicListCreation">OpacAllowPublicListCreation</link> : If patrons can create lists then decide
46098 if they are allowed to create public lists</para>
46101 <para><link linkend="suggestionspref">suggestion</link> : Decide if you want
46102 patrons to be able to submit purchase suggestions</para>
46105 <para><link linkend="OPACViewOthersSuggestions">OPACViewOthersSuggestions</link> :
46106 Decide if you want patrons to be able to see purchase suggestions made by other
46113 <para><link linkend="opacbookbag">opacbookbag</link> : Decide if
46114 patrons can save items into their cart</para>
46118 <para><link linkend="AnonSuggestions">AnonSuggestions</link> :
46119 Decide if you want non logged in users to be able to make
46120 purchase suggestions</para>
46124 <para><link linkend="LibraryName">LibraryName</link> : Enter
46125 your library name for display in the <title> tag and on
46126 the top of the OPAC</para>
46130 <para><link linkend="opaccredits">opaccredits</link> : Enter
46131 HTML to appear at the bottom of every page in the OPAC</para>
46135 <para><link linkend="OpacMainUserBlock">OpacMainUserBlock</link>
46136 : Enter HTML that will appear in the center of the main OPAC
46141 <para><link linkend="OpacNav">OpacNav</link> : Enter HTML that
46142 will appear to the left on the main OPAC page</para>
46146 <para><link linkend="OpacNavBottom">OpacNavBottom</link> : Enter
46147 HTML that will appear below OpacNav</para>
46151 <para><link linkend="OpacNavRight">OpacNavRight</link> : Enter
46152 HTML that will appear below the login box on the right</para>
46156 <para><link linkend="opacheader">opacheader</link> : Enter the
46157 HTML that will appear above the search box on the OPAC</para>
46161 <para><link linkend="OPACNoResultsFound">OPACNoResultsFound</link> : Enter
46162 the HTML that will appear when no results are found</para>
46166 <para><link linkend="OPACResultsSidebar">OPACResultsSidebar</link> : Enter
46167 the HTML that will appear below the facets on your search
46172 <para><link linkend="OPACMySummaryHTML">OPACMySummaryHTML</link>
46173 : Enter the HTML that will appear in the far right of the
46174 circulation summary in the OPAC</para>
46178 <para>Customize your stylesheets:</para>
46182 <para><link linkend="OPACUserCSS">OPACUserCSS</link> : Enter
46183 any additional fields you want to define styles for</para>
46187 <para><link linkend="opaclayoutstylesheet">opaclayoutstylesheet</link> :
46188 Point to a CSS file on your Koha server</para>
46194 <para><link linkend="OpacHighlightedWords">OpacHighlightedWords</link> :
46195 Decide if you want search terms to be highlighted on the search
46200 <para><link linkend="hidelostitems">hidelostitems</link> :
46201 Decide if you want to show patrons items you have marked as
46206 <para><link linkend="BiblioDefaultView">BiblioDefaultView</link>
46207 : Decide what view is the default for bib records on the
46212 <para><link linkend="OPACShelfBrowser">OPACShelfBrowser</link> : Decide if you want to
46213 enable the shelf browse functionality</para>
46217 <para><link linkend="OPACURLOpenInNewWindow">OPACURLOpenInNewWindow</link> :
46218 Decide if URLs clicked in the OPAC are opened in a new
46223 <para><link linkend="SearchMyLibraryFirst">SearchMyLibraryFirst</link> : If
46224 you have a multi-branch system decide if you want patrons to
46225 search their library first</para>
46229 <para><link linkend="OpacAuthorities">OpacAuthorities</link> :
46230 Decide if you want patrons to be able to search your authority
46235 <para><link linkend="OpacBrowser">OpacBrowser</link> : Decide if you want patrons to
46236 browse your authority file (French libraries only)</para>
46240 <para><link linkend="OPACSearchForTitleIn">OPACSearchForTitleIn</link> :
46241 Choose which libraries you want patrons to be able to re-run
46242 their search in</para>
46246 <para><link linkend="OpacAddMastheadLibraryPulldown">OpacAddMastheadLibraryPulldown</link>
46247 : If you're a multi-branch system you can add a pull down to the
46248 search bar for patrons to search which library to search</para>
46252 <para><link linkend="EnableOpacSearchHistory">EnableOpacSearchHistory</link>
46253 : Decide if you want the system to keep a search history</para>
46259 <para>Set up your <link linkend="cronjobs">cron jobs</link></para>
46263 <para>If you have the <link linkend="OpacBrowser">OpacBrowser</link> preference set
46264 decide <link linkend="authbrowsercron">when you want the contents to rebuild</link>
46265 (French libraries only)</para>
46269 <para>If you have <link linkend="customrss">custom RSS
46270 feeds</link>, decide when you want the <link linkend="customrssfeedcron">feed to be populated</link></para>
46276 <section id="editableopac">
46277 <title><link linkend="editableopac">Editable OPAC Regions</link></title>
46279 <para>Using the OPAC system preferences you can customize various regions, the following
46280 graphic will define what preferences update each of the regions in the Bootstrap
46284 <screeninfo>OPAC Editable Regions</screeninfo>
46288 <imagedata fileref="images/appendix-opac/opaccustomregions.jpg"/>
46295 <section id="impenhanced">
46296 <title><link linkend="impenhanced">Enhanced Content Configuration</link></title>
46298 <para>Koha allows you to pull in content from outside sources to enhance
46299 your bib records. All of this content can be toggled on and off using
46300 the enhanced content system preferences.</para>
46304 <para><link linkend="frbrenhancedprefs">FRBR/Editions</link></para>
46308 <para>If you would like to have your OPAC and/or staff client
46309 show an 'Editions' tab on the bib record, you want to enable one
46310 or the other FRBR preferences and then either one or both of the
46311 ISBN services (XISBN and ThingISBN).</para>
46317 <para><link linkend="amazonprefs">Amazon</link> : This service is
46318 free and just requires that you visit <ulink url="http://aws.amazon.com">http://aws.amazon.com</ulink> to sign
46323 <para>Using the Amazon preferences you can choose to show cover
46324 images from Amazon.</para>
46330 <para><link linkend="Babelthequeprefs">Babelthèque</link></para>
46334 <para>This is a pay service. Contact Babelthèque to learn how to
46335 enable this content in the OPAC.</para>
46341 <para><link linkend="btcontentprefs">Baker and Taylor</link></para>
46345 <para>This is a pay service from Baker & Taylor. Contact
46346 Baker & Taylor for the information to enter into these
46347 preferences.</para>
46353 <para><link linkend="html5">HTML5 Media</link><itemizedlist>
46355 <para>This allows libraries to embed streaming media in their catalog</para>
46357 </itemizedlist></para>
46360 <para><link linkend="googleprefs">Google</link></para>
46363 <para>This service is free and does not require registration, simply enable
46364 GoogleJackets and you're set to go.</para>
46370 <para><link linkend="IDreamLibraries">I Deam Books</link><itemizedlist>
46372 <para>This is a free service that compiles reviews for popular titles from many
46373 different sources.</para>
46375 </itemizedlist></para>
46378 <para><link linkend="librarythingprefs">LibraryThing</link></para>
46381 <para>With the exception of ThingISBN, you will need to contact LibraryThing for the
46382 information to enter into these preferences</para>
46385 <para>Enabling ThingISBN will help to populate the editions tab on the bib record
46386 display if you have enabled FRBR.</para>
46392 <para><link linkend="novelistselect">Novelist</link></para>
46396 <para>This is a pay service from Ebsco. Contact Ebsco for the
46397 information to enter into these preferences</para>
46403 <para><link linkend="oclcprefs">OCLC</link></para>
46406 <para>XISBN is used to populate the editions tab on the bib record display if you have
46407 enabled FRBR. This service is free for up to 999 queries a day.</para>
46412 <para><link linkend="OpenLibraryPrefs">Open Library</link><itemizedlist>
46414 <para>Open Library project is an open system that you can pull cover images (and in
46415 the future additional content) from</para>
46417 </itemizedlist></para>
46421 <para><link linkend="overdriveprefs">Overdrive</link><itemizedlist>
46423 <para>This is a pay service that libraries can subscribe to for ebook content. If
46424 the library subscribes to Overdrive they can integrate that content in to Koha for
46427 </itemizedlist></para>
46430 <para><link linkend="Syndeticsprefs">Syndetics</link></para>
46433 <para>This is a pay service from Syndetics to add content for your bib records.
46434 Contact Syndetics for the information to enter into these preferences.</para>
46440 <para><link linkend="taggingprefs">Tagging</link></para>
46444 <para>Choose whether or not you want to allow patrons to add
46445 tags to records in Koha.</para>
46452 <section id="impacq">
46453 <title><link linkend="impacq">Acquisitions Configuration</link></title>
46455 <para>When using acquisitions in Koha you first need to define some
46460 <para>Set up your <link linkend="budgetplanning">funds &
46461 budgets</link></para>
46465 <para>Choose your <link linkend="currexchangeadmin">default
46466 currency</link> and enter others if you order from multiple
46471 <para>Enter in your <link linkend="acqvendors">vendor
46472 information</link></para>
46476 <para>Create an <link linkend="marcbibframeworks">Framework with the
46477 code ACQ</link> (if you're going to enter item records at the time
46478 of ordering or receiving)</para>
46482 <para>Acquisitions System preferences</para>
46486 <para><link linkend="AcqCreateItem">AcqCreateItem</link> :
46487 Decide if an item record is created during acquisition</para>
46491 <para><link linkend="CurrencyFormat">CurrencyFormat</link> :
46492 Decide how you want monetary amounts to display</para>
46496 <para><link linkend="gist">gist</link> : Enter your sales tax
46497 (if you are billed for tax)</para>
46501 <para><link linkend="OrderPdfFormat">OrderPdfFormat</link> :
46502 Decide what format you want your print orders to use</para>
46509 <section id="impserials">
46510 <title><link linkend="impserials">Serials Configuration</link></title>
46512 <para>When you use serials there are a few options you can set before
46517 <para>Serials System Preferences</para>
46521 <para><link linkend="RenewSerialAddsSuggestion">RenewSerialAddsSuggestion</link>
46522 : Decide if you want renewing serials to add a suggestion for
46523 easy purchasing</para>
46527 <para><link linkend="RoutingSerials">RoutingSerials</link> :
46528 Decide if you want to route serials around your library</para>
46532 <para><link linkend="RoutingListAddReserves">RoutingListAddReserves</link> :
46533 Decide if holds are placed on serials when there is a routing
46534 list in place</para>
46540 <para>Cataloging System Preferences</para>
46544 <para><link linkend="StaffSerialIssueDisplayCount">StaffSerialIssueDisplayCount</link>
46545 : Decide how many of the most recent issues to display in the
46546 staff client</para>
46550 <para><link linkend="OPACSerialIssueDisplayCount">OPACSerialIssueDisplayCount</link>
46551 : Decide how many of the most recent issues to display in the
46556 <para><link linkend="SubscriptionHistory">SubscriptionHistory</link> :
46557 Decide how you want the subscription information to display in
46565 <section id="impgolive">
46566 <title><link linkend="impgolive">Planning for Go-Live</link></title>
46568 <para>Once you have all of your settings ready, you need to prepare for
46569 making your system live:</para>
46573 <para>Decide if you need training by an outside service or if your
46574 staff can do the training themselves.</para>
46578 <para>Make sure that there is time for your staff to play with your
46579 test system and get comfortable with it</para>
46583 <para>If this is a migration, work with your previous company to
46584 extract data right before you go live</para>
46588 <para>Come up with URLs for your new Koha OPAC & Staff
46593 <para>Make sure that if you're hosting your own system you have a
46600 <chapter id="sopac">
46601 <title>SOPAC2 Installation</title>
46603 <section id="sopacintro">
46607 <firstname>Jean-André</firstname>
46608 <surname>Santoni</surname>
46610 <orgname>BibLibre</orgname>
46615 <firstname>Nicole C.</firstname>
46616 <surname>Engard</surname>
46617 <contrib>Translation and minor edits.</contrib>
46621 <pubdate>August 2009</pubdate>
46623 <title><link linkend="sopacintro">Introduction</link></title>
46625 <para>This is an installation guide for SOPAC2 and its Koha connector. It
46626 has been tested on Debian Lenny and Ubuntu Jaunty with Drupal 6.12 and Koha
46627 3.0.x. It does not cover the installation of Koha and Drupal, only
46628 SOPAC, its dependencies and the connector.</para>
46631 <section id="sopacinstall">
46632 <title><link linkend="sopacinstall">Installation of Locum and Insurge</link></title>
46634 <para>Locum and Insurge are the two libraries used primarily by SOPAC.
46635 They serve as a layer of abstraction to the data. Insurge manages the
46636 social aspect (tags, reviews, ratings), while Locum manages the
46637 connection to the ILS via the connector. Both libraries use a different
46638 database from that of Drupal.</para>
46640 <section id="sopacdepend">
46641 <title><link linkend="sopacdepend">Dependencies</link></title>
46643 <para>There are no packages for Debian MDB2 yet, you can install it
46646 <programlisting># apt-get install php-pear
46647 # pear install MDB2
46648 # pear install MDB2#mysql</programlisting>
46651 <section id="sopacdownload">
46652 <title><link linkend="sopacdownload">Download</link></title>
46654 <para>Download the Locum and Insurge libraries from SVN:</para>
46656 <programlisting># cd /usr/local/lib
46657 # svn co http://dobby.darienlibrary.org/svn/locum/trunk/ locum
46658 # svn co http://dobby.darienlibrary.org/svn/insurge/trunk/ insurge</programlisting>
46661 <section id="sopaccreatedb">
46662 <title><link linkend="sopaccreatedb">Creation of the Database</link></title>
46664 <programlisting>$ mysql -u root
46665 mysql> create database scas;
46666 mysql> grant all privileges on scas.* to scas_user@'localhost' identified by 'scas_pass';
46667 mysql> flush privileges;
46668 mysql> exit</programlisting>
46671 <section id="sopacdsn">
46672 <title><link linkend="sopacdsn">Sync DSN</link></title>
46674 <para>This file will provide the connection information to a DB
46677 <programlisting># nano /usr/local/etc/locum_insurge_dsn.php</programlisting>
46679 <para>It should contain:</para>
46681 <programlisting><?php
46682 $dsn = 'mysql://scas_user:scas_pass@localhost/scas';</programlisting>
46685 <section id="sopacinstallinsurge">
46686 <title><link linkend="sopacinstallinsurge">Installation of Insurge</link></title>
46688 <para>If you customize the name of the database, remember to edit the
46691 <programlisting># nano /usr/local/lib/insurge/sql/scas_insurge.sql</programlisting>
46693 <para>Import Insurge:</para>
46695 <programlisting>$ mysql -u root -p < /usr/local/lib/insurge/sql/scas_insurge.sql</programlisting>
46697 <para>Configure Insurge:</para>
46699 <programlisting># nano /usr/local/lib/insurge/config/insurge.ini</programlisting>
46701 <para>The variables in insurge.ini are empty. The default values are
46702 too long and cause MySQL errors.</para>
46704 <para>Here is a sample of insurge.ini</para>
46706 <programlisting>; This is the Locum configuration file
46707 ; General configuration options for your installation of Insurge.
46709 dsn_file = "/usr/local/etc/locum_insurge_dsn.php"
46710 ; This is where you configure your repository membership information.
46712 ; parent_server is the server name of the repository parent server you have been
46714 ; group_id = The group ID you have been given by your repository admin.
46715 ; These configuration points are OPTIONAL and are only necessary if you are
46716 ; participating in a repository relationship.
46720 group_key = ""</programlisting>
46723 <section id="sopacinstallocum">
46724 <title><link linkend="sopacinstallocum">Installation of Locum</link></title>
46726 <para>The same procedure applies to Locum</para>
46728 <programlisting># nano /usr/local/lib/locum/sql/scas_locum.sql
46729 # mysql < /usr/local/lib/locum/sql/scas_locum.sql
46730 # nano /usr/local/lib/locum/sql/locum_init.sql
46731 # mysql < /usr/local/lib/locum/sql/locum_init.sql
46732 # nano /usr/local/lib/locum/config/locum.ini
46733 # mkdir /usr/local/var
46734 # mkdir /usr/local/var/log</programlisting>
46736 <para>Configure the DSN:</para>
46738 <programlisting>[locum_config]
46739 dsn_file = "/usr/local/etc/locum_insurge_dsn.php"</programlisting>
46741 <para>And the information for your Koha installation:</para>
46743 <programlisting>[ils_config]
46745 ils_version = "30x"
46746 ils_server = "localhost"
46747 ils_harvest_port = "80"</programlisting>
46749 <para>The rest depends on your Koha configuration.</para>
46753 <section id="sopackoha">
46754 <title><link linkend="sopackoha">Installation of Koha Connector</link></title>
46756 <para>Download the Koha connector using SVN:</para>
46758 <programlisting># cd /usr/local/lib/locum/connectors/
46759 # svn co http://dobby.darienlibrary.org/svn/connectors/koha/ locum_koha_30x</programlisting>
46762 <section id="sopacharvest">
46763 <title><link linkend="sopacharvest">Harvest Records</link></title>
46765 <para>Now that the connector is in place, we will be able to launch
46766 harvest.php, a tool that will reap Locum DB Koha and fill the
46769 <para>Start by configuring harvest.php:</para>
46771 <programlisting># nano /usr/local/lib/locum/tools/harvest.php</programlisting>
46773 <para>Here are the variables you must change:</para>
46775 <programlisting>$first_record = 1;
46776 $last_record = 30;</programlisting>
46778 <para>These are the minimum and maximum biblionumbers from your Koha
46781 <para>Then start the harvest:</para>
46783 <programlisting># chmod +x /usr/local/lib/locum/tools/harvest.php
46784 $ /usr/local/lib/locum/tools/harvest.php</programlisting>
46787 <section id="sopacphinx">
46788 <title><link linkend="sopacphinx">Installation of Sphinx</link></title>
46790 <para>Sphinx is the indexer for the database used by Locum and
46793 <section id="sphinxdepend">
46794 <title><link linkend="sphinxdepend">Dependencies</link></title>
46796 <para>There is no Debian package for Sphinx so you'll have to compile
46797 the source directly:</para>
46799 <programlisting># apt-get install g++ make libmysql++-dev</programlisting>
46802 <section id="sphinxdownload">
46803 <title><link linkend="sphinxdownload">Download and Compile</link></title>
46805 <programlisting>$ wget http://sphinxsearch.com/downloads/sphinx-0.9.8.tar.gz
46806 $ tar zxvf sphinx-0.9.8.tar.gz
46808 $ ./configure --prefix=/usr/local/sphinx
46811 # mkdir /usr/local/sphinx
46812 # mkdir /usr/local/sphinx/lib
46813 # cp api/sphinxapi.php /usr/local/sphinx/lib/
46814 $ rm -R sphinx-0.9.8*</programlisting>
46817 <section id="sphinxuser">
46818 <title><link linkend="sphinxuser">Creation of User and Group</link></title>
46820 <para>Creating a Sphinx user and change the owner:</para>
46822 <programlisting># adduser sphinx
46824 # usermod -G sphinx sphinx
46825 # mkdir /usr/local/sphinx/var/run
46826 # chown -R sphinx.sphinx /usr/local/sphinx/var</programlisting>
46829 <section id="demonsphinx">
46830 <title><link linkend="demonsphinx">The Sphinx daemon</link></title>
46832 <para>Download:</para>
46834 <programlisting># cd /etc/init.d
46835 # wget http://www.thesocialopac.net/sites/thesocialopac.net/files/sphinx
46836 # chmod +x /etc/init.d/sphinx</programlisting>
46838 <para>Add Sphinx to the default boot services:</para>
46840 <programlisting># update-rc.d sphinx defaults</programlisting>
46843 <section id="sphinxconfig">
46844 <title><link linkend="sphinxconfig">Configuration</link></title>
46846 <para>Copy the configuration file supplied with the source of Sphinx
46847 before the change:</para>
46849 <programlisting># cp /usr/local/lib/locum/sphinx/sphinx.conf /usr/local/sphinx/etc/
46850 # sed 's/locum_db_user/scas_user/g' /usr/local/sphinx/etc/sphinx.conf > tmpfile;
46851 mv tmpfile /usr/local/sphinx/etc/sphinx.conf
46852 # sed 's/locum_db_pass/scas_pass/g' /usr/local/sphinx/etc/sphinx.conf > tmpfile; mv tmpfile /usr/local/sphinx/etc/sphinx.conf</programlisting>
46854 <para>And if you personalize the name of the database:</para>
46856 <programlisting># sed 's/scas/MY_DB/g' /usr/local/sphinx/etc/sphinx.conf > tmpfile; mv tmpfile /usr/local/sphinx/etc/sphinx.conf</programlisting>
46859 <section id="sphinxindexing">
46860 <title><link linkend="sphinxindexing">Indexing documents</link></title>
46862 <para>Indexing is necessary if you want to use the search features of
46865 <para>You must first complete the Insurge table index</para>
46867 <programlisting># chmod +x /usr/local/lib/insurge/tools/update-index.php
46868 $ /usr/local/lib/insurge/tools/update-index.php</programlisting>
46870 <para>Then start indexing Sphinx</para>
46872 <programlisting>$ /usr/local/sphinx/bin/indexer --all</programlisting>
46874 <para>Finally, we must start the daemon:</para>
46876 <programlisting># /etc/init.d/sphinx start</programlisting>
46878 <para>When the daemon is running, you can update the index with:</para>
46880 <programlisting>$ /usr/local/sphinx/bin/indexer --all --rotate</programlisting>
46884 <section id="installsopac">
46885 <title><link linkend="installsopac">Installation of SOPAC2</link></title>
46887 <para>Now to the SOPAC software itself:</para>
46889 <section id="downloadsopac">
46890 <title><link linkend="downloadsopac">Download</link></title>
46892 <para>Download from SVN:</para>
46894 <programlisting>$ cd /chemin/vers/drupal/sites/all/
46897 $ svn co http://dobby.darienlibrary.org/svn/sopac/trunk/ sopac</programlisting>
46900 <section id="sopacinstallation">
46901 <title><link linkend="sopacinstallation">Installation</link></title>
46903 <para>In Drupal's administration settings, activate the module.
46904 Also, enable the dependencies:</para>
46908 <para>Profile</para>
46912 <para>PHP Filter</para>
46920 <para>The Drupal menu should now list these entries.</para>
46923 <section id="configsopac">
46924 <title><link linkend="configsopac">Configuration</link></title>
46926 <para>Then go into the settings of SOPAC.</para>
46930 <para>Configure the paths to the Locum and Insurge
46935 <para>Choose a URL prefix SOPAC, in my "catalog". Create a node
46936 with content like:</para>
46940 <programlisting><?php
46941 print sopac_search_form('both');
46942 print theme('pages_catalog');</programlisting>
46946 <para>Check the Input Format "PHP Code"</para>
46950 <para>Check Move to front page</para>
46954 <para>In URL path settings, set the SOPAC URL prefix you have
46959 <para>Go to the root of Drupal, a search form will appear.</para>
46961 <para>Remember to empty Drupal's cache when something does not
46964 <para>Drupal offers a few blocks, which are not configured by default.
46965 You must specify on which page they should appear.</para>
46970 <chapter id="cronjobsch">
46971 <title>Cron Jobs</title>
46973 <para>A cron job is a Linux command for scheduling a command or script on your server to
46974 complete repetitive tasks automatically. Scripts executed as a cron job are typically used to
46975 modify files or databases; however, they can perform other tasks that do not modify data on
46976 the server, like sending out email notifications. Koha has many cron jobs in place that you
46977 can enable (search engine indexing, overdue notice generation, data cleanup and more), this
46978 chapter will explain those for you.</para>
46980 <section id="cronjobs">
46981 <title><link linkend="cronjobs">Cron Jobs</link></title>
46983 <para>The locations below assume a dev install which puts the crons in
46984 misc/, if you have a standard install you may want to look in bin/ for
46985 these files if you cannot find them in misc/</para>
46987 <section id="searchcron">
46988 <title><link linkend="searchcron">Search</link></title>
46992 <section id="rebuildsearchcron">
46993 <title><link linkend="rebuildsearchcron">Rebuild Index</link></title>
46995 <para>Script path: misc/migration_tools/rebuild_zebra.pl</para>
46997 <para>Does: Updates Zebra indexes with recently changed data.</para>
46999 <para>Required by: Zebra</para>
47001 <para>Frequency suggestion: every x minutes, (between 5-15 minutes)
47002 depending on performance needs</para>
47006 <section id="circcron">
47007 <title><link linkend="circcron">Circulation</link></title>
47009 <section id="buildholdscron">
47010 <title><link linkend="buildholdscron">Holds Queue</link></title>
47012 <para>Script path: misc/cronjobs/holds/build_holds_queue.pl</para>
47014 <para>Does: Updates holds queue report</para>
47016 <para>Required by: <link linkend="holdsqueue">Holds Queue
47017 Report</link></para>
47019 <para>Frequency suggestion: every 1-4 hours</para>
47021 <para>Description:</para>
47025 <para>A script that should be run periodically if your library
47026 system allows borrowers to place on-shelf holds. This script
47027 decides which library should be responsible for fulfilling a
47028 given hold request.</para>
47030 <para>It's behavior is controlled by the system preferences
47031 <link linkend="holdqueueweight">StaticHoldsQueueWeight</link>
47032 and <link linkend="holdqueueweight">RandomizeHoldsQueueWeight</link>.</para>
47034 <para>If you do not want all of your libraries to participate in
47035 the on-shelf holds fulfillment process, you should list the the
47036 libraries that *do* participate in the process here by inputting
47037 all the participating library's branchcodes, separated by commas
47038 ( e.g. "MPL,CPL,SPL,BML" etc. ).</para>
47040 <para>By default, the holds queue will be generated such that
47041 the system will first attempt to hold fulfillment using items
47042 already at the pickup library if possible. If there are no items
47043 available at the pickup library to fill a hold,
47044 build_holds_queue.pl will then use the list of libraries defined
47045 in StaticHoldsQueueWeight. If RandomizeHoldsQueueWeight is
47046 disabled ( which it is by default ), the script will assign
47047 fulfillment requests in the order the branches are placed in the
47048 StaticHoldsQueueWeight system preference.</para>
47050 <para>For example, if your system has three libraries, of
47051 varying sizes ( small, medium and large ) and you want the
47052 burden of holds fulfillment to be on larger libraries before
47053 smaller libraries, you would want StaticHoldsQueueWeight to look
47054 something like "LRG,MED,SML".</para>
47056 <para>If you want the burden of holds fulfillment to be spread
47057 out equally throughout your library system, simply enable
47058 RandomizeHoldsQueueWeight. When this system preference is
47059 enabled, the order in which libraries will be requested to
47060 fulfill an on-shelf hold will be randomized each time the list
47061 is regenerated.</para>
47063 <para>Leaving StaticHoldsQueueWeight empty is contraindicated at
47064 this time. Doing so will cause the build_holds_queue script to
47065 ignore RandomizeHoldsQueueWeight, causing the script to request
47066 hold fulfillment not randomly, but by alphabetical order.</para>
47070 <section id="buildholdscronperl">
47071 <title><link linkend="buildholdscronperl">Perl Documentation</link></title>
47073 <para><emphasis role="bold">GetBibsWithPendingHoldRequests</emphasis></para>
47075 <para>my $biblionumber_aref =
47076 GetBibsWithPendingHoldRequests();</para>
47078 <para>Return an arrayref of the biblionumbers of all bibs that
47079 have one or more unfilled hold requests.</para>
47081 <para><emphasis role="bold">GetPendingHoldRequestsForBib</emphasis></para>
47083 <para>my $requests =
47084 GetPendingHoldRequestsForBib($biblionumber);</para>
47086 <para>Returns an arrayref of hashrefs to pending, unfilled hold
47089 <para>the bib identified by $biblionumber. The following keys are
47090 present in each hashref:</para>
47094 <para>biblionumber</para>
47098 <para>borrowernumber</para>
47102 <para>itemnumber</para>
47106 <para>priority</para>
47110 <para>branchcode</para>
47114 <para>reservedate</para>
47118 <para>reservenotes</para>
47122 <para>borrowerbranch</para>
47126 <para>The arrayref is sorted in order of increasing
47129 <para><emphasis role="bold">GetItemsAvailableToFillHoldRequestsForBib</emphasis></para>
47131 <para>my $available_items =</para>
47133 <para>GetItemsAvailableToFillHoldRequestsForBib($biblionumber);</para>
47135 <para>Returns an arrayref of items available to fill hold requests
47136 for the bib identified by $biblionumber. An item is available to
47139 <para>request if and only if:</para>
47143 <para>it is not on loan</para>
47147 <para>it is not withdrawn</para>
47151 <para>it is not marked notforloan</para>
47155 <para>it is not currently in transit</para>
47159 <para>it is not lost</para>
47163 <para>it is not sitting on the hold shelf</para>
47167 <para><emphasis role="bold">MapItemsToHoldRequests</emphasis></para>
47169 <para>MapItemsToHoldRequests($hold_requests,
47170 $available_items);</para>
47172 <para><emphasis role="bold">CreatePickListFromItemMap</emphasis></para>
47174 <para><emphasis role="bold">AddToHoldTargetMap</emphasis></para>
47176 <para><emphasis role="bold">_get_branches_to_pull_from</emphasis></para>
47178 <para>Query system preferences to get ordered list of branches to
47179 use to fill hold requests.</para>
47183 <section id="expiredholdscron">
47184 <title><link linkend="expiredholdscron">Expired Holds</link></title>
47187 misc/cronjobs/holds/cancel_expired_holds.pl</para>
47189 <para>Does: By default, this cron job will only automatically cancel
47190 holds where the user has set an expiration date. If the library is
47191 using the <link linkend="ExpireReservesMaxPickUpDelay">ExpireReservesMaxPickUpDelay</link>
47192 and <link linkend="ExpireReservesMaxPickUpDelayCharge">ExpireReservesMaxPickUpDelayCharge</link>
47193 preferences then this script will also cancel holds that have been
47194 sitting on the hold shelf for too long and will (if the library
47195 does) charge the patron for not picking up the hold.</para>
47197 <para>Frequency suggestion: daily</para>
47200 <section id="unsuspendholdcron">
47201 <title><link linkend="unsuspendholdcron">Unsuspend Holds</link></title>
47204 misc/cronjobs/holds/auto_unsuspend_holds.pl</para>
47206 <para>Does: This script checks to find holds that should no longer
47207 be suspended and removes the suspension if the <link linkend="AutoResumeSuspendedHolds">AutoResumeSuspendedHolds</link>
47208 preference is set to 'allow'. This puts the patron back in to the
47209 queue where they were when the hold was suspended.</para>
47211 <para>Frequency suggestion: daily</para>
47214 <section id="finescronjob">
47215 <title><link linkend="finescronjob">Fines</link></title>
47217 <para>Script path: misc/cronjobs/fines.pl</para>
47218 <para>Does: Calculates and posts fines to patron accounts.</para>
47220 <para>Required by: <link linkend="finesMode">finesMode</link> system
47223 <para>Frequency suggestion: nightly</para>
47226 <section id="longoverduecron">
47227 <title><link linkend="longoverduecron">Long Overdues</link></title>
47229 <para>Script path: misc/cronjobs/longoverdue.pl</para>
47231 <para>Does: allows one to specify delays for changing items to
47232 different lost statuses, and optionally charge for them using the
47233 replacement price listed on the item record.</para>
47235 <para>Frequency suggestion: nightly<note>
47236 <para>Staff can control some of the parameters for the longoverdue cron job with the
47237 <link linkend="DefaultLongOverdueLostValue">DefaultLongOverdueLostValue</link> and
47238 <link linkend="DefaultLongOverdueChargeValue">DefaultLongOverdueChargeValue</link>
47239 preferences.</para>
47242 <section id="longoverduecronperl">
47243 <title><link linkend="longoverduecronperl">Perl Documentation</link></title>
47245 <para><emphasis role="bold">NAME</emphasis></para>
47247 <para>longoverdue.pl cron script to set lost statuses on overdue
47248 materials. Execute without options for help.</para>
47249 <para><emphasis role="bold">DESCRIPTION</emphasis></para>
47250 <para> --lost | -l </para>
47251 <para>This option takes the form of n=lv, where n is num days overdue, and lv is the
47252 lost value. See warning below.</para>
47253 <para> --charge | -c </para>
47254 <para>This specifies what lost value triggers Koha to charge the account for the lost
47255 item. Replacement costs are not charged if this is not specified. </para>
47256 <para>--verbose | v </para>
47257 <para>verbose. </para>
47258 <para>--confirm </para>
47259 <para>confirm. without this option, the script will report the number of affected items
47260 and return without modifying any records. </para>
47261 <para>--quiet </para>
47262 <para>suppress summary output. </para>
47263 <para>--maxdays </para>
47264 <para>Specifies the end of the range of overdue days to deal with (defaults to 366).
47265 This value is universal to all lost num days overdue passed. </para>
47266 <para>--mark-returned </para>
47267 <para>When an item is marked lost, remove it from the borrowers issued items.</para>
47271 <section id="updateissuescron">
47272 <title><link linkend="updateissuescron">Track total checkouts</link></title>
47274 <para>Script path: misc/cronjobs/update_totalissues.pl</para>
47276 <para>Does: updates the biblioitems.totalissues field in the
47277 database with the latest tally of checkouts.</para>
47279 <para>Frequency suggestion: nightly</para>
47280 <section id="updateissuesperldoc">
47281 <title><link linkend="updateissuesperldoc">Perl Documentation</link></title>
47282 <para><emphasis role="bold">NAME</emphasis>
47284 <para>update_totalissues.pl </para>
47285 <para><emphasis role="bold">SYNOPSIS</emphasis>
47287 <para>update_totalissues.pl --use-stats </para>
47288 <para>update_totalissues.pl --use-items </para>
47289 <para>update_totalissues.pl --commit=1000 </para>
47290 <para>update_totalissues.pl --since='2012-01-01' </para>
47291 <para>update_totalissues.pl --interval=30d </para>
47292 <para><emphasis role="bold">DESCRIPTION</emphasis>
47294 <para>This batch job populates bibliographic records' total issues count based on
47295 historical issue statistics. </para>
47296 <para>--help Prints this help </para>
47297 <para>-v|--verbose </para>
47298 <para>Provide verbose log information (list every bib modified). </para>
47299 <para>--use-stats </para>
47300 <para>Use the data in the statistics table for populating total issues. </para>
47301 <para>--use-items </para>
47302 <para>Use items.issues data for populating total issues. Note that issues data from the
47303 items table does not respect the --since or --interval options, by definition. Also
47304 note that if both --use-stats and --use-items are specified, the count of biblios
47305 processed will be misleading. </para>
47306 <para>-s|--since=DATE </para>
47307 <para>Only process issues recorded in the statistics table since DATE. </para>
47308 <para>-i|--interval=S </para>
47309 <para>Only process issues recorded in the statistics table in the last N units of time.
47310 The interval should consist of a number with a one- letter unit suffix. The valid
47311 suffixes are h (hours), d (days), w (weeks), m (months), and y (years). The default
47312 unit is days. </para>
47313 <para>--incremental </para>
47314 <para>Add the number of issues found in the statistics table to the existing total
47315 issues count. Intended so that this script can be used as a cron job to update
47316 popularity information during low-usage periods. If neither --since or --interval are
47317 specified, incremental mode will default to processing the last twenty-four hours. </para>
47318 <para>--commit=N </para>
47319 <para>Commit the results to the database after every N records are processed. </para>
47320 <para>--test </para>
47321 <para>Only test the popularity population script. </para>
47322 <para><emphasis role="bold">WARNING</emphasis>
47324 <para>If the time on your database server does not match the time on your Koha server
47325 you will need to take that into account, and probably use the --since argument instead
47326 of the --interval argument for incremental updating. </para>
47327 <para><emphasis role="bold">CREDITS</emphasis>
47329 <para>This patch to Koha was sponsored by the Arcadia Public Library and the Arcadia
47330 Public Library Foundation in honor of Jackie Faust-Moreno, late director of the
47331 Arcadia Public Library. </para>
47332 <para><emphasis role="bold">AUTHOR</emphasis>
47334 <para>Jared Camins-Esakov <jcamins AT cpbibliography DOT com></para>
47337 <section id="offlinecirccron">
47338 <title><link linkend="offlinecirccron">Generate Patron File for Offline Circulation</link></title>
47339 <para>Script path: misc/cronjobs/create_koc_db.pl</para>
47340 <para>Does: Generates the borrowers.db file for use with the <link linkend="windowsofflinecirc">Koha Offline Circulation</link> tool</para>
47341 <para>Frequency suggestion: weekly</para>
47343 <section id="autorenewcron">
47344 <title><link linkend="autorenewcron">Automatic renewal</link></title>
47345 <para>Script path: misc/cronjobs/automatic_renewals.pl</para>
47346 <para>Does: Will automatically renew items if you're allowing automatic renewal with your
47347 <link linkend="circfinerules">circulation and fine rules</link>.</para>
47348 <para>Frequency suggestion: nightly</para>
47349 <section id="autorenewcronperl">
47350 <title><link linkend="autorenewcronperl">Perl Documentation</link></title>
47351 <para><emphasis role="bold">NAME</emphasis>
47353 <para>automatic_renewals.pl - cron script to renew loans </para>
47354 <para><emphasis role="bold">SYNOPSIS</emphasis>
47356 <para>./automatic_renewals.pl </para>
47357 <para>or, in crontab: 0 3 * * * automatic_renewals.pl </para>
47358 <para><emphasis role="bold">DESCRIPTION</emphasis>
47360 <para>This script searches for issues scheduled for automatic renewal
47361 (issues.auto_renew). If there are still renews left (Renewals allowed) and the renewal
47362 isn't premature (No Renewal before) the issue is renewed. </para>
47363 <para><emphasis role="bold">OPTIONS</emphasis>
47365 <para>No options.</para>
47369 <section id="patroncrons">
47370 <title><link linkend="patroncrons">Patrons</link></title>
47372 <section id="deleteexpiredregistrationcron">
47373 <title><link linkend="deleteexpiredregistrationcron">Unverified Registrations</link></title>
47374 <para>Script path: misc/cronjobs/delete_expired_opac_registrations.pl</para>
47375 <para>Does: Deletes patron registrations that were submitted via the OPAC but not reviewed
47376 by the library within the number of days entered in the <link linkend="PatronSelfRegistrationExpireTemporaryAccountsDelay">PatronSelfRegistrationExpireTemporaryAccountsDelay</link> preference.</para>
47377 <para>Frequency suggestion: nightly</para>
47379 <section id="deleteunverifiedcron">
47380 <title><link linkend="deleteunverifiedcron">Unconfirmed Registrations</link></title>
47381 <para>Script path: misc/cronjobs/delete_unverified_opac_registrations.pl </para>
47382 <para>Does: Deletes patron self registrations that were submitted via the OPAC but not
47383 confirmed via email within 24 hours. This is only necessary if you are requiring patrons
47384 to confirm their registrations via email with the <link linkend="PatronSelfRegistrationVerifyByEmail">PatronSelfRegistrationVerifyByEmail</link> preference.</para>
47385 <para>Frequency suggestion: hourly</para>
47387 <section id="anonymizecron">
47388 <title><link linkend="anonymizecron">Anonymize Patron Data</link></title>
47389 <para>Script path: misc/cronjobs/batch_anonymise.pl</para>
47390 <para>Does: Used to anonymize patron data. This will remove borrowernumbers from
47391 circulation history so that the stats are kept, but the patron information is removed
47392 for privacy reasons.</para>
47394 <section id="j2acron">
47395 <title><link linkend="j2acron">Update Child to Adult Patron Type</link></title>
47396 <para>Script path: misc/cronjobs/j2a.pl</para>
47397 <para>Does: Convert juvenile/child patrons from juvenile patron category and category code
47398 to corresponding adult patron category and category code when they reach the upper age
47399 limit defined in the Patron Categories. </para>
47400 <para>Frequency suggestion: nightly</para>
47401 <section id="j2aperldoc">
47402 <title><link linkend="j2aperldoc">Perl Documentation</link></title>
47403 <para><emphasis role="bold">NAME</emphasis>
47405 <para>juv2adult.pl - convert juvenile/child patrons from juvenile patron category and
47406 category code to corresponding adult patron category and category code when they reach
47407 the upper age limit defined in the Patron Categories. </para>
47408 <para><emphasis role="bold">SYNOPSIS</emphasis>
47410 <para>juv2adult.pl [ -b=<branchcode> -f=<categorycode> -t=<categorycode> ] </para>
47411 <para>Options: </para>
47412 <para>--help brief help message </para>
47413 <para>--man full documentation </para>
47414 <para>-v verbose mode </para>
47415 <para>-n take no action, display only </para>
47416 <para>-b <branchname> only deal with patrons from this library/branch </para>
47417 <para>-f <categorycode> change patron category from this category </para>
47418 <para>-t <categorycode> change patron category to this category </para>
47419 <para>=head1 OPTIONS </para>
47420 <para>--help Print a brief help message and exits. </para>
47421 <para>--man Prints the manual page and exits. </para>
47422 <para>-v Verbose. Without this flag set, only fatal errors are reported. </para>
47423 <para>-n No Action. With this flag set, script will report changes but not actually
47424 execute them on the database. </para>
47425 <para>-b changes patrons for one specific branch. Use the value in the
47426 branches.branchcode table.</para>
47427 <para> -f *required* defines the juvenile category to update. Expects the code from
47428 categories.categorycode. </para>
47429 <para>-t *required* defines the category juvenile patrons will be converted to. Expects
47430 the code from categories.categorycode. </para>
47431 <para><emphasis role="bold">DESCRIPTION</emphasis>
47433 <para>This script is designed to update patrons from juvenile to adult patron types,
47434 remove the guarantor, and update their category codes appropriately when they reach
47435 the upper age limit defined in the Patron Categories. </para>
47436 <para><emphasis role="bold">USAGE EXAMPLES</emphasis>
47438 <para>"juv2adult.pl" - Suggests that you read this help. :) </para>
47439 <para>"juv2adult.pl" -b=<branchcode> -f=<categorycode> -t=<categorycode> -
47440 Processes a single branch, and updates the patron categories from fromcat to tocat. </para>
47441 <para>"juv2adult.pl" -f=<categorycode> -t=<categorycode> -v -n - Processes all
47442 branches, shows all messages, and reports the patrons who would be affected. Takes no
47443 action on the database.</para>
47448 <section id="noticescron">
47449 <title><link linkend="noticescron">Notices</link></title>
47453 <section id="msgqueuecron">
47454 <title><link linkend="msgqueuecron">Message Queue</link></title>
47456 <para>Script path: misc/cronjobs/process_message_queue.pl</para>
47458 <para>Does: processes the message queue to send the check out, check in and hold filled
47459 emails and SMS message to users and sends outgoing emails to patrons. requires <link linkend="EnhancedMessagingPreferences">EnhancedMessagingPreferences</link> to be
47462 <para>Frequency suggestion: 1-4 hours<important>
47463 <para>Item due and Advanced due notices are controlled by the <link linkend="advnoticecron">advance_notices cron</link>.</para>
47464 </important></para>
47467 <section id="advnoticecron">
47468 <title><link linkend="advnoticecron">Advanced Notice</link></title>
47470 <para>Script path: misc/cronjobs/advance_notices.pl</para>
47472 <para>Does: prepares "pre-due" notices and "item due" notices for
47473 patrons who request them prepares notices for patrons for items just
47474 due or coming due soon. requires <link linkend="EnhancedMessagingPreferences">EnhancedMessagingPreferences</link>
47477 <para>Frequency suggestion: nightly</para>
47480 <para>This script does not actually send the notices. It queues
47481 them in the <link linkend="msgqueuecron">message queue</link> for
47485 <section id="advnoticecronperl">
47486 <title><link linkend="advnoticecronperl">Perl Documentation</link></title>
47488 <para><emphasis role="bold">NAME</emphasis></para>
47490 <para>advance_notices.pl - cron script to put item due reminders
47491 into message queue</para>
47493 <para><emphasis role="bold">SYNOPSIS</emphasis></para>
47495 <para>./advance_notices.pl -c</para>
47497 <para>or, in crontab: 0 1 * * * advance_notices.pl -c</para>
47499 <para><emphasis role="bold">DESCRIPTION</emphasis></para>
47501 <para>This script prepares pre-due and item due reminders to be
47502 sent to patrons. It queues them in the message queue, which is
47503 processed by the process_message_queue.pl cronjob. The type and
47504 timing of the messages can be configured by the patrons in their
47505 "My Alerts" tab in the OPAC.</para>
47507 <para><emphasis role="bold">METHODS</emphasis></para>
47509 <para>parse_letter</para>
47513 <section id="overduenoticecron">
47514 <title><link linkend="overduenoticecron">Overdue Notice</link></title>
47516 <para>Script path: misc/cronjobs/overdue_notices.pl</para>
47518 <para>Does: prepares messages to alert patrons of overdue messages
47519 (both via email and print)</para>
47521 <para>Frequency suggestion: nightly</para>
47524 <para>This script does not actually send the notices. It queues
47525 them in the <link linkend="msgqueuecron">message queue</link> for
47526 later or generates the HTML for later printing</para>
47529 <section id="overduenoticecronperl">
47530 <title><link linkend="overduenoticecronperl">Perl Documentation</link></title>
47532 <para><emphasis role="bold">NAME</emphasis></para>
47534 <para>overdue_notices.pl - prepare messages to be sent to patrons
47535 for overdue items</para>
47537 <para><emphasis role="bold">SYNOPSIS</emphasis></para>
47539 <para>overdue_notices.pl [ -n ] [ -library <branchcode> ] [
47540 -library <branchcode>...] [ -max <number of days> ] [
47541 -csv [ <filename> ] ] [-itemscontent <field list>
47544 <para>Options:</para>
47546 <para>-help brief help message</para>
47548 <para>-man full documentation</para>
47550 <para>-n No email will be sent</para>
47552 <para>-max <days> maximum days overdue to deal with</para>
47554 <para>-library <branchname> only deal with overdues from
47555 this library (repeatable : several libraries can be given)</para>
47557 <para>-csv <filename> populate CSV file</para>
47559 <para>-html <filename> Output html to file</para>
47561 <para>-itemscontent <list of fields> item information in
47564 <para>-borcat <categorycode> category code that must be
47567 <para>-borcatout <categorycode> category code that must be
47570 <para><emphasis role="bold">OPTIONS</emphasis></para>
47572 <para>-help Print a brief help message and exits.</para>
47574 <para>-man Prints the manual page and exits.</para>
47576 <para>-v Verbose. Without this flag set, only fatal errors are
47579 <para>-n Do not send any email. Overdue notices that would have
47580 been sent to the patrons or to the admin are printed to standard
47581 out. CSV data (if the -csv flag is set) is written to standard out
47582 or to any csv filename given.</para>
47584 <para>-max Items older than max days are assumed to be handled
47585 somewhere else, probably the longoverdues.pl script. They are
47586 therefore ignored by this program. No notices are sent for them,
47587 and they are not added to any CSV files. Defaults to 90 to match
47588 longoverdues.pl.</para>
47590 <para>-library</para>
47592 <para>select overdues for one specific library. Use the value in
47593 the branches.branchcode table. This option can be repeated in
47594 order to select overdues for a group of libraries.</para>
47596 <para>-csv Produces CSV data. if -n (no mail) flag is set, then
47597 this CSV data is sent to standard out or to a filename if
47598 provided. Otherwise, only overdues that could not be emailed are
47599 sent in CSV format to the admin.</para>
47601 <para>-itemscontent</para>
47603 <para>comma separated list of fields that get substituted into
47604 templates in places of the <<items.content>>
47605 placeholder. This defaults to
47606 issuedate,title,barcode,author</para>
47608 <para>Other possible values come from fields in the biblios,
47609 items, and issues tables.</para>
47611 <para>-borcat Repetable field, that permit to select only few of
47612 patrons categories.</para>
47614 <para>-borcatout</para>
47616 <para>Repetable field, permis to exclude some patrons
47619 <para>-t | --triggered</para>
47621 <para>This option causes a notice to be generated if and only if
47622 an item is overdue by the number of days defined in a notice
47625 <para>By default, a notice is sent each time the script runs,
47626 which is suitable for less frequent run cron script, but requires
47627 syncing notice triggers with the cron schedule to ensure proper
47628 behavior. Add the --triggered option for daily cron, at the risk
47629 of no notice being generated if the cron fails to run on
47632 <para>-list-all</para>
47634 <para>Default items.content lists only those items that fall in
47635 the range of the currently processing notice. Choose list-all to
47636 include all overdue items in the list (limited by -max
47639 <para><emphasis role="bold">DESCRIPTION</emphasis></para>
47641 <para>This script is designed to alert patrons and administrators
47642 of overdue items.</para>
47644 <para>Configuration</para>
47646 <para>This script pays attention to the overdue notice
47647 configuration performed in the "Overdue notice/status triggers"
47648 section of the "Tools" area of the staff interface to Koha. There,
47649 you can choose which letter templates are sent out after a
47650 configurable number of days to patrons of each library. More
47651 information about the use of this section of Koha is available in
47652 the Koha manual.</para>
47654 <para>The templates used to craft the emails are defined in the
47655 "Tools: Notices" section of the staff interface to Koha.</para>
47657 <para>Outgoing emails</para>
47659 <para>Typically, messages are prepared for each patron with
47660 overdue items. Messages for whom there is no email address on file
47661 are collected and sent as attachments in a single email to each
47662 library administrator, or if that is not set, then to the email
47663 address in the "KohaAdminEmailAddress" system preference.</para>
47665 <para>These emails are staged in the outgoing message queue, as
47666 are messages produced by other features of Koha. This message
47667 queue must be processed regularly by the
47668 misc/cronjobs/process_message_queue.pl program.</para>
47670 <para>In the event that the "-n" flag is passed to this program,
47671 no emails are sent. Instead, messages are sent on standard output
47672 from this program. They may be redirected to a file if
47675 <para>Templates</para>
47677 <para>Templates can contain variables enclosed in double angle
47678 brackets like <<this>>. Those variables will be
47679 replaced with values specific to the overdue items or relevant
47680 patron. Available variables are:</para>
47682 <para><<bib>></para>
47684 <para>the name of the library</para>
47686 <para><<items.content>></para>
47688 <para>one line for each item, each line containing a tab separated
47689 list of title, author, barcode, issuedate</para>
47691 <para><<borrowers.*>></para>
47693 <para>any field from the borrowers table</para>
47695 <para><<branches.*>></para>
47697 <para>any field from the branches table</para>
47699 <para>CSV output</para>
47701 <para>The "-csv" command line option lets you specify a file to
47702 which overdues data should be output in CSV format.</para>
47704 <para>With the "-n" flag set, data about all overdues is written
47705 to the file. Without that flag, only information about overdues
47706 that were unable to be sent directly to the patrons will be
47707 written. In other words, this CSV file replaces the data that is
47708 typically sent to the administrator email address.</para>
47710 <para><emphasis role="bold">USAGE EXAMPLES</emphasis></para>
47712 <para>"overdue_notices.pl" - In this most basic usage, with no
47713 command line arguments, all libraries are processed individually,
47714 and notices are prepared for all patrons with overdue items for
47715 whom we have email addresses. Messages for those patrons for whom
47716 we have no email address are sent in a single attachment to the
47717 library administrator's email address, or to the address in the
47718 KohaAdminEmailAddress system preference.</para>
47720 <para>"overdue_notices.pl -n -csv /tmp/overdues.csv" - sends no
47721 email and populates /tmp/overdues.csv with information about all
47722 overdue items.</para>
47724 <para>"overdue_notices.pl -library MAIN max 14" - prepare notices
47725 of overdues in the last 2 weeks for the MAIN library.</para>
47727 <para><emphasis role="bold">SEE ALSO</emphasis></para>
47729 <para>The misc/cronjobs/advance_notices.pl program allows you to
47730 send messages to patrons in advance of their items becoming due,
47731 or to alert them of items that have just become due.</para>
47733 <para><emphasis role="bold">INTERNAL METHODS</emphasis></para>
47735 <para>These methods are internal to the operation of
47736 overdue_notices.pl.</para>
47738 <para>parse_letter</para>
47740 <para>parses the letter template, replacing the placeholders with
47741 data specific to this patron, biblio, or item</para>
47743 <para>named parameters:</para>
47745 <para>letter - required hashref</para>
47747 <para>borrowernumber - required integer</para>
47749 <para>substitute - optional hashref of other key/value pairs that
47750 should be substituted in the letter content</para>
47752 <para>returns the "letter" hashref, with the content updated to
47753 reflect the substituted keys and values.</para>
47755 <para>prepare_letter_for_printing</para>
47757 <para>returns a string of text appropriate for printing in the
47758 event that an overdue notice will not be sent to the patron's
47759 email address. Depending on the desired output format, this may be
47760 a CSV string, or a human-readable representation of the
47763 <para>required parameters:</para>
47765 <para>letter</para>
47767 <para>borrowernumber</para>
47769 <para>optional parameters:</para>
47771 <para>outputformat</para>
47775 <section id="printholdcron">
47776 <title><link linkend="printholdcron">Print Hold Notices</link></title>
47778 <para>Script path: misc/cronjobs/gather_print_notices.pl</para>
47780 <para>Does: looks through the message queue for hold notices that
47781 didn't go through because the patron didn't have an email address
47782 and generates a print notice</para>
47784 <para>Frequency suggestion: nightly</para>
47787 <section id="talkingtechcrons">
47788 <title><link linkend="talkingtechcrons">Talking Tech</link></title>
47790 <para>To learn more about setting up this third party product view
47791 the <link linkend="talkingtechappendix">Talking Tech
47792 Appendix</link>.</para>
47794 <section id="talkingtechsendcron">
47795 <title><link linkend="talkingtechsendcron">Sending Notices File</link></title>
47798 misc/cronjobs/thirdparty/TalkingTech_itiva_outbound.pl</para>
47800 <para>Does: Script to generate Spec C outbound notifications file
47801 for Talking Tech i-tiva phone notification system.</para>
47803 <para>Required by: <link linkend="TalkingTechItivaPhoneNotification">TalkingTechItivaPhoneNotification</link></para>
47805 <para>Frequency suggestion: nightly</para>
47807 <section id="talkingsendcronperl">
47808 <title><link linkend="talkingsendcronperl">Perl Documentation</link></title>
47810 <para><emphasis role="bold">USAGE</emphasis></para>
47812 <para>TalkingTech_itiva_outbound.pl</para>
47814 <para>TalkingTech_itiva_outbound.pl --type=OVERDUE -w 0 -w 2 -w
47815 6 --output=/tmp/talkingtech/outbound.csv</para>
47817 <para>TalkingTech_itiva_outbound.pl --type=RESERVE
47818 --type=PREOVERDUE --lang=FR</para>
47820 <para>Script to generate Spec C outbound notifications file for
47821 Talking Tech i-tiva phone notification system.</para>
47823 <para>--help -h</para>
47825 <para>Prints this help</para>
47827 <para>-v Provide verbose log information.</para>
47829 <para>--output -o</para>
47831 <para>Destination for outbound notifications file (CSV format).
47832 If no value is specified, output is dumped to screen.</para>
47834 <para>--lang</para>
47836 <para>Sets the language for all outbound messages. Currently
47837 supported values are EN, FR and ES. If no value is specified, EN
47838 will be used by default.</para>
47840 <para>--type</para>
47842 <para>REQUIRED. Sets which messaging types are to be used. Can
47843 be given multiple times, to specify multiple types in a single
47844 output file. Currently supported values are RESERVE, PREOVERDUE
47845 and OVERDUE. If no value is given, this script will not produce
47846 any outbound notifications.</para>
47848 <para>--waiting-hold-day -w</para>
47850 <para>OPTIONAL for --type=RESERVE. Sets the days after a hold
47851 has been set to waiting on which to call. Use switch as many
47852 times as desired. For example, passing "-w 0 -w 2 -w 6" will
47853 cause calls to be placed on the day the hold was set to waiting,
47854 2 days after the waiting date, and 6 days after. See example
47855 above. If this switch is not used with --type=RESERVE, calls
47856 will be placed every day until the waiting reserve is picked up
47857 or canceled.</para>
47859 <para>--library-code --code -c</para>
47861 <para>OPTIONAL The code of the source library of the message.
47862 The library code is used to group notices together for
47863 consortium purposes and apply library specific settings, such as
47864 prompts, to those notices. This field can be blank if all
47865 messages are from a single library.</para>
47869 <section id="talkingtechreceivecron">
47870 <title><link linkend="talkingtechreceivecron">Receiving Notices File</link></title>
47873 misc/cronjobs/thirdparty/TalkingTech_itiva_inbound.pl</para>
47875 <para>Does: Script to process received Results files for Talking
47876 Tech i-tiva phone notification system.</para>
47878 <para>Required by: <link linkend="TalkingTechItivaPhoneNotification">TalkingTechItivaPhoneNotification</link></para>
47880 <para>Frequency suggestion: nightly</para>
47882 <section id="talkingreceivecronperl">
47883 <title><link linkend="talkingreceivecronperl">Perl Documentation</link></title>
47885 <para><emphasis role="bold">USAGE</emphasis></para>
47887 <para>TalkingTech_itiva_inbound.pl</para>
47889 <para>TalkingTech_itiva_inbound.pl -v
47890 --input=/tmp/talkingtech/results.csv</para>
47892 <para>Script to process received Results files for Talking Tech
47893 i-tiva phone notification system.</para>
47895 <para>--help -h</para>
47897 <para>Prints this help</para>
47899 <para>-v Provide verbose log information.</para>
47901 <para>--input -i</para>
47903 <para>REQUIRED. Path to incoming results file.</para>
47907 <section id="patronexpirycron">
47908 <title><link linkend="patronexpirycron">Notify Patrons of Expiration</link></title>
47909 <para>Script path: misc/cronjobs/membership_expiry.pl </para>
47910 <para>Does: Sends messages to warn patrons of their card expiration to the <link linkend="msgqueuecron">messaage queue</link> cron.</para>
47911 <para>Requires: <link linkend="MembershipExpiryDaysNotice">MembershipExpiryDaysNotice</link></para>
47912 <para>Frequency: nightly</para>
47916 <section id="proccartcron">
47917 <title><link linkend="proccartcron">In Processing/Book Cart</link></title>
47919 <para>Script path: misc/cronjobs/cart_to_shelf.pl</para>
47921 <para>Does: Updates all items with a location of CART to the item's
47922 permanent location.</para>
47924 <para>Required by: <link linkend="NewItemsDefaultLocation">NewItemsDefaultLocation</link>,
47925 <link linkend="InProcessingToShelvingCart">InProcessingToShelvingCart</link>,
47926 & <link linkend="ReturnToShelvingCart">ReturnToShelvingCart</link>
47927 system preferences</para>
47929 <para>Frequency suggestion: hourly</para>
47931 <section id="proccartcronperl">
47932 <title><link linkend="proccartcronperl">Perl Documentation</link></title>
47934 <para><emphasis role="bold">NAME</emphasis></para>
47936 <para>cart_to_shelf.pl cron script to set items with location of
47937 CART to original shelving location after X hours. Execute without
47938 options for help.</para>
47942 <section id="catalogcron">
47943 <title><link linkend="catalogcron">Catalog</link></title>
47947 <section id="checkurlcron">
47948 <title><link linkend="checkurlcron">Check URLs</link></title>
47950 <para>Script path: misc/cronjobs/check-url.pl</para>
47952 <para>Does: checks URLs in 856$u field. Script output can now be
47953 formatted in CSV or HTML. The HTML version links directly to MARC
47954 biblio record editor.</para>
47956 <para>Frequency suggestion: monthly</para>
47958 <para>Learn more: <ulink url="http://wiki.koha-community.org/wiki/Check-url_enhancements">http://wiki.koha-community.org/wiki/Check-url_enhancements</ulink></para>
47960 <section id="checkurlcronperl">
47961 <title><link linkend="checkurlcronperl">Perl Documentation</link></title>
47963 <para><emphasis role="bold">NAME</emphasis></para>
47965 <para>C4::URL::Checker - base object for checking URL stored in
47968 <para><emphasis role="bold">SYNOPSIS</emphasis></para>
47970 <programlisting>use C4::URL::Checker;
47972 my $checker = C4::URL::Checker->new( );
47973 $checker->{ host_default } = 'http://mylib.kohalibrary.com';
47974 my $checked_urls = $checker->check_biblio( 123 );
47975 foreach my $url ( @$checked_urls ) {
47976 print "url: ", $url->{ url A }, "\n",
47977 "is_success: ", $url->{ is_success }, "\n",
47978 "status: ", $url->{ status }, "\n";
47979 } </programlisting>
47981 <para><emphasis role="bold">FUNCTIONS</emphasis></para>
47985 <para>Create a URL Checker. The returned object can be used to set
47986 default host variable :</para>
47988 <programlisting>my $checker = C4::URL::Checker->new( );
47989 $checker->{ host_default } = 'http://mylib.kohalibrary.com'; </programlisting>
47991 <para>check_biblio</para>
47993 <para>Check all URL from a biblio record. Returns a pointer to an
47994 array containing all URLs with checking for each of them.</para>
47996 <programlisting> my $checked_urls = $checker->check_biblio( 123 ); </programlisting>
47998 <para>With 2 URLs, the returned array will look like that:</para>
48002 'url' => 'http://mylib.tamil.fr/img/62265_0055B.JPG',
48003 'is_success' => 1,
48004 'status' => 'ok'
48007 'url' => 'http://mylib.tamil.fr//img/62265_0055C.JPG',
48008 'is_success' => 0,
48009 'status' => '404 - Page not found'
48011 ], </programlisting>
48013 <para><emphasis role="bold">NAME</emphasis></para>
48015 <para>check-url.pl - Check URLs from 856$u field.</para>
48017 <para><emphasis role="bold">USAGE</emphasis></para>
48019 <para>check-url.pl [--verbose|--help]
48020 [--host=http://default.tld]</para>
48022 <para>Scan all URLs found in 856$u of bib records and display if
48023 resources are available or not.</para>
48025 <para><emphasis role="bold">PARAMETERS</emphasis></para>
48027 <para>--host=http://default.tld</para>
48029 <para>Server host used when URL doesn't have one, ie doesn't begin
48030 with 'http:'. For example, if --host=http://www.mylib.com, then
48031 when 856$u contains 'img/image.jpg', the url checked is:
48032 http://www.mylib.com/image.jpg'.</para>
48034 <para>--verbose|-v</para>
48036 <para>Outputs both successful and failed URLs.</para>
48038 <para>--html</para>
48040 <para>Formats output in HTML. The result can be redirected to a
48041 file accessible by http. This way, it's possible to link directly
48042 to biblio record in edit mode. With this parameter --host-pro is
48045 <para>--host-pro=http://koha-pro.tld</para>
48047 <para>Server host used to link to biblio record editing
48050 <para>--help|-h</para>
48052 <para>Print this help page.</para>
48056 <section id="mergeauthcron">
48057 <title><link linkend="mergeauthcron">Update Authorities</link></title>
48059 <para>Script path: misc/migration_tools/merge_authority.pl</para>
48061 <para>Does: Updates biblio data with changes to authorities records<note>
48062 <para>The name of this script is misleading. This script does not merge authorities
48063 together it instead merges authority data with linked bib records. Edits to
48064 authority records will be applied to bibliographic records that use that authority
48065 when this script is run.</para>
48068 <para>Required by: <link linkend="dontmerge">dontmerge</link> system
48071 <para>Frequency suggestion: nightly</para>
48074 <section id="serialscron">
48075 <title><link linkend="serialscron">Serials Update</link></title>
48077 <para>Script path: misc/cronjobs/serialsUpdate.pl</para>
48079 <para>Does: checks if there is a "late" issue on active
48080 subscriptions, and if there is, the script will set it as late, and
48081 add the next one as expected.</para>
48083 <para>Frequency suggestion: nightly</para>
48085 <section id="autoitemupdatecron">
48086 <title><link linkend="autoitemupdatecron">Automatic item update</link></title>
48087 <para>Script path: misc/cronjobs/automatic_item_modification_by_age.pl</para>
48088 <para>Does: updates items based on the list of rules set forth in the <link linkend="autoitemagemod">Automatic item modifications by age</link> tool</para>
48089 <para>Required by: <link linkend="autoitemagemod">Automatic item modifications by
48092 <para>Frequency suggestions: nightly</para>
48093 <section id="autoitemupdatecrondoc">
48094 <title><link linkend="autoitemupdatecrondoc">Perl Documentation</link></title>
48095 <para><emphasis role="bold">NAME</emphasis>
48097 <para>automatic_item_modification_by_age.pl </para>
48098 <para><emphasis role="bold">SYNOPSIS</emphasis>
48100 <para>./automatic_item_modification_by_age.pl -h </para>
48101 <para>Toggle recent acquisitions status. Use this script to delete "new" status for
48103 <para><emphasis role="bold">OPTIONS</emphasis>
48105 <para>-h|--help Prints this help message. </para>
48106 <para>-v|--verbose Set the verbose flag. </para>
48107 <para>-c|--confirm The script will modify the items. </para>
48108 <para><emphasis role="bold">AUTHOR</emphasis>
48110 <para>Jonathan Druart <jonathan.druart@biblibre.com> </para>
48111 <para><emphasis role="bold">COPYRIGHT</emphasis>
48113 <para>Copyright 2013 BibLibre </para>
48114 <para><emphasis role="bold">LICENSE</emphasis>
48116 <para>This file is part of Koha. </para>
48117 <para>Koha is free software; you can redistribute it and/or modify it under the terms of
48118 the GNU General Public License as published by the Free Software Foundation; either
48119 version 3 of the License, or (at your option) any later version. </para>
48120 <para>Koha is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
48121 without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
48122 PURPOSE. See the GNU General Public License for more details. </para>
48123 <para>You should have received a copy of the GNU General Public License along with Koha;
48124 if not, see <http://www.gnu.org/licenses>.</para>
48129 <section id="opaccrons">
48130 <title><link linkend="opaccrons">OPAC</link></title>
48134 <section id="customrssfeedcron">
48135 <title><link linkend="customrssfeedcron">RSS Feeds</link></title>
48137 <para>Script path: misc/cronjobs/rss/rss.pl</para>
48139 <para>Does: Produces an RSS XML document for any SQL query (not used
48140 for search results RSS feed). <link linkend="customrss">Learn
48141 more</link>.</para>
48143 <para>Frequency suggestion: hourly</para>
48146 <section id="authbrowsercron">
48147 <title><link linkend="authbrowsercron">Authorities Browser</link></title>
48149 <para>Script path: misc/cronjobs/build_browser_and_cloud.pl</para>
48151 <para>Does: Generate content for authorities browse in OPAC</para>
48153 <para>Required by: <link linkend="OpacBrowser">OpacBrowser</link> system preference<important>
48154 <para>This preference and cron job should only be used on French systems.</para>
48155 </important></para>
48158 <section id="keywordclouds">
48159 <title><link linkend="keywordclouds">Subject/Author Clouds</link></title>
48161 <para>Script path: misc/cronjobs/cloud-kw.pl</para>
48163 <para>Does: Generates HTML keywords clouds from Koha Zebra indexes.
48164 misc/cronjobs/cloud-sample.conf has a sample of how this script
48167 <para>Frequency: This is the type of script you can run once a month
48168 or so, the content generated isn't going to change very much over
48171 <section id="keywordcloudsperl">
48172 <title><link linkend="keywordcloudsperl">Perl Documentation</link></title>
48174 <para><emphasis role="bold">NAME</emphasis></para>
48176 <para>cloud-kw.pl - Creates HTML keywords clouds from Koha Zebra
48179 <para><emphasis role="bold">USAGE</emphasis></para>
48181 <para>cloud-kw.pl [--verbose|--help] --conf=cloud.conf</para>
48183 <para>Creates multiple HTML files containing keywords cloud with
48184 top terms sorted by their logarithmic weight. cloud.conf is a YAML
48185 configuration file driving cloud generation process.</para>
48187 <para><emphasis role="bold">PARAMETERS</emphasis></para>
48189 <para>--conf=configuration file</para>
48191 <para>Specify configuration file name</para>
48193 <para>--verbose|-v</para>
48195 <para>Enable script verbose mode.</para>
48197 <para>--help|-h</para>
48199 <para>Print this help page.</para>
48201 <para><emphasis role="bold">CONFIGURATION</emphasis></para>
48203 <para>Configuration file looks like that:</para>
48205 <para><programlisting> ---
48206 # Koha configuration file for a specific installation
48207 # If not present, defaults to KOHA_CONF
48208 KohaConf: /home/koha/mylibray/etc/koha-conf.xml
48209 # Zebra index to scan
48211 # Koha index used to link found kewords with an opac search URL
48213 # Number of top keyword to use for the cloud
48215 # Include CSS style directives with the cloud
48216 # This could be used as a model and then CSS directives are
48217 # put in the appropriate CSS file directly.
48219 # HTML file where to output the cloud
48220 Output: /home/koha/mylibrary/koharoot/koha-tmpl/cloud-author.html
48222 KohaConf: /home/koha/yourlibray/etc/koha-conf.xml
48223 ZebraIndex: Subject
48227 Output: /home/koha/yourlibrary/koharoot/koha-tmpl/cloud-subject.html</programlisting><emphasis role="bold">IMPROVEMENTS</emphasis></para>
48229 <para>Generated top terms have more informations than those
48230 outputted from the time being. Some parameters could be easily
48231 added to improve this script:</para>
48233 <para>WithCount</para>
48235 <para>In order to output terms with the number of occurrences they
48236 have been found in Koha Catalogue by Zebra.</para>
48238 <para>CloudLevels</para>
48240 <para>Number of levels in the cloud. Now 24 levels are
48243 <para>Weighting</para>
48245 <para>Weighting method used to distribute terms in the cloud. We
48246 could have two values: Logarithmic and Linear. Now it's
48247 Logarithmic by default.</para>
48251 <para>Now terms are outputted in the lexical order. They could be
48252 sorted by their weight.</para>
48257 <section id="systemcron">
48258 <title><link linkend="systemcron">System Administration</link></title>
48262 <section id="cleandbcron">
48263 <title><link linkend="cleandbcron">Clean up Database</link></title>
48265 <para>Script path: misc/cronjobs/cleanup_database.pl</para>
48267 <para>Does: Truncates the sessions table, cleans out old zebraqueue entries, action logs
48268 and staged MARC files.</para>
48270 <title>Perl Documentation</title>
48271 <para><emphasis role="bold">USAGE</emphasis></para>
48272 <para>kohaclone/misc/cronjobs/cleanup_database.pl [-h|--help] [--sessions] [--sessdays
48273 DAYS] [-v|--verbose] [--zebraqueue DAYS] [-m|--mail] [--merged] [--import DAYS]
48274 [--logs DAYS] [--searchhistory DAYS]</para>
48275 <para><emphasis role="bold">PARAMETERS</emphasis></para>
48276 <para>-h --help </para>
48277 <para>prints this help message, and exits, ignoring all other options</para>
48278 <para>--sessions </para>
48279 <para>purge the sessions table. If you use this while users are logged into Koha, they
48280 will have to reconnect.</para>
48281 <para>--sessdays DAYS </para>
48282 <para>purge only sessions older than DAYS days</para>
48283 <para>-v --verbose </para>
48284 <para>will cause the script to give you a bit more information about the run.</para>
48285 <para>--zebraqueue DAYS </para>
48286 <para>purge completed zebraqueue entries older than DAYS days. Defaults to 30 days if no
48287 days specified.</para>
48288 <para>-m --mail DAYS </para>
48289 <para>purge items from the mail queue that are older than DAYS days. Defaults to 30 days
48290 if no days specified.</para>
48291 <para>--merged </para>
48292 <para>purged completed entries from need_merge_authorities.</para>
48293 <para>--import DAYS </para>
48294 <para>purge records from import tables older than DAYS days. Defaults to 60 days if no
48295 days specified</para>
48296 <para>--z3950 </para>
48297 <para>purge records from import tables that are the result of Z39.50 searches</para>
48298 <para>--logs DAYS </para>
48299 <para>purge entries from action_logs older than DAYS days. Defaults to 180 days if no
48300 days specified</para>
48301 <para>--searchhistory DAYS </para>
48302 <para>purge entries from search_history older than DAYS days. Defaults to 30 days if no
48303 days specified</para>
48304 <para>--list-invites DAYS </para>
48305 <para>purge (unaccepted) list share invites older than DAYS days. Defaults to 14 days if
48306 no days specified.</para>
48307 <para>--restrictions DAYS</para>
48308 <para>purge patrons restrictions expired since more than DAYS days. Defaults to 30 days
48309 if no days specified. </para>
48312 <section id="usagecron">
48313 <title><link linkend="usagecron">Share Usage Stats</link></title>
48314 <para>Script path: misc/cronjobs/share_usage_with_koha_community.pl</para>
48315 <para>Does: If you're sharing information via the <link linkend="UsageStats">UsageStats</link> feature this will send your info to the <ulink url="http://hea.koha-community.org/">Hea website</ulink>.</para>
48316 <para>Frequency: monthly</para>
48317 <section id="usagecronperl">
48318 <title><link linkend="usagecronperl">Perl Documentation</link></title>
48319 <para><emphasis role="bold">NAME</emphasis>
48321 <para>share_usage_with_koha_community.pl - Share your library's usage with the Koha
48323 <para><emphasis role="bold">SYNOPSIS</emphasis>
48325 <para>share_usage_with_koha_community.pl [-h|--help] [-v|--verbose] </para>
48326 <para>If the <link linkend="UsageStats">UsageStats</link> system preference is set, you
48327 can launch this script to share your usage data anonymously with the Koha community. </para>
48328 <para>Collecting Koha usage statistics will help developers to know how Koha is used
48329 across the world. </para>
48330 <para>This script will send the usage data for the bibliographic and authority records,
48331 checkouts, holds, orders, and subscriptions. </para>
48332 <para>Only the total number is retrieved. In no case will private data be shared! </para>
48333 <para>In order to know which parts of Koha modules are used, this script will collect
48334 some system preference values. </para>
48335 <para>If you want to tell us who you are, you can fill the <link linkend="UsageStatsLibraryName">UsageStatsLibraryName</link> system preference with
48336 your library name, <link linkend="UsageStatsLibraryUrl">UsageStatsLibraryUrl</link>,
48337 <link linkend="UsageStatsLibraryType">UsageStatsLibraryType</link> and/or <link linkend="UsageStatsCountry">UsageStatsCountry</link>. </para>
48338 <para>All these data will be analyzed on the <ulink url="http://hea.koha-community.org">http://hea.koha-community.org</ulink> Koha community website. </para>
48339 <para>IMPORTANT : please do NOT run the cron on the 1st, but on another day. The idea is
48340 to avoid all Koha libraries sending their data at the same time ! So choose any day
48341 between 1 and 28 !</para>
48342 <para><emphasis role="bold">OPTIONS</emphasis>
48344 <para>-h|--help </para>
48345 <para>Print a brief help message </para>
48346 <para>-v|--verbose </para>
48347 <para>Verbose mode. </para>
48348 <para>-f|--force </para>
48349 <para>Force the update.</para>
48350 <para><emphasis role="bold">AUTHOR</emphasis>
48352 <para>Alex Arnaud <alex.arnaud@biblibre.com> </para>
48353 <para>Jonathan Druart <jonathan.druart@biblibre.com></para>
48354 <para><emphasis role="bold">COPYRIGHT</emphasis>
48356 <para>Copyright 2014 BibLibre</para>
48357 <para><emphasis role="bold">LICENSE</emphasis>
48359 <para>This file is part of Koha. </para>
48360 <para>Koha is free software; you can redistribute it and/or modify it under the terms of
48361 the GNU General Public License as published by the Free Software Foundation; either
48362 version 3 of the License, or (at your option) any later version. </para>
48363 <para>You should have received a copy of the GNU General Public License along with Koha;
48364 if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
48365 Boston, MA 02110-1301 USA.</para>
48370 <section id="acqcrons">
48371 <title><link linkend="acqcrons">Acquisitions</link></title>
48373 <section id="cleansuggcron">
48374 <title><link linkend="cleansuggcron">Clean up old suggestions</link></title>
48376 <para>Script path: misc/cronjobs/purge_suggestions.pl</para>
48378 <para>Does: Removes old (defined by you) suggestions from the
48379 suggestion management area.</para>
48381 <section id="emailsuggestfund">
48382 <title><link linkend="emailsuggestfund">Email suggestions to process</link></title>
48383 <para>Script path: misc/cronjobs/notice_unprocessed_suggestions.pl</para>
48384 <para>Does: Generates a notice to the fund owner that there are suggestions in need of
48386 <section id="emailsuggestfundperl">
48387 <title><link linkend="emailsuggestfundperl">Perl Documentation</link></title>
48388 <para><emphasis role="bold">NAME</emphasis>
48390 <para>notice_unprocessed_suggestions.pl - Generate notification for unprocessed
48391 suggestions. </para>
48392 <para>The budget owner will be notified. </para>
48393 <para>The letter template 'TO_PROCESS' will be used. </para>
48394 <para><emphasis role="bold">SYNOPSIS</emphasis>
48396 <para>notice_unprocessed_suggestions.pl [-h|--help] [-v|--verbose] [-c|--confirm]
48397 [--days=NUMBER_OF_DAYS] </para>
48398 <para><emphasis role="bold">OPTIONS</emphasis>
48400 <para>-h|--help Print a brief help message </para>
48401 <para>-c|--confirm This flag must be provided in order for the script to actually
48402 generate notices. If it is not supplied, the script will only report on the patron it
48403 would have noticed. </para>
48404 <para>--days This parameter is mandatory. It must contain an integer representing the
48405 number of days elapsed since the last modification of suggestions to process. </para>
48406 <para>-v|--verbose Verbose mode.</para>
48409 <section id="edicron">
48410 <title><link linkend="edicron">EDI Message Processing</link></title>
48411 <para>Script path: misc/cronjobs/edi_cron.pl</para>
48412 <para>Does: Sends and received EDI messages</para>
48413 <para>Frequency: Every 15 minutes</para>
48417 <section id="deprecatedcrons">
48418 <title><link linkend="deprecatedcrons">Deprecated scripts</link></title>
48420 <para>These should not be run without modification:</para>
48422 <para>Script path: misc/cronjobs/update_items.pl</para>
48424 <para>Script path:misc/cronjobs/smsoverdues.pl</para>
48426 <para>Script path:misc/cronjobs/notifyMailsOp.pl</para>
48428 <para>Script path:misc/cronjobs/reservefix.pl</para>
48430 <para>Script path:misc/cronjobs/zebraqueue_start.pl</para>
48435 <chapter id="webservices">
48436 <title>Web Services</title>
48440 <section id="OAI-PMHservice">
48441 <title><link linkend="OAI-PMHservice">OAI-PMH</link></title>
48442 <para>For the Open Archives Initiative-Protocol for Metadata Harvesting (OAI-PMH) there are
48443 two groups of 'participants': Data Providers and Service Providers. Data Providers (open
48444 archives, repositories) provide free access to metadata, and may, but do not necessarily,
48445 offer free access to full texts or other resources. OAI-PMH provides an easy to implement,
48446 low barrier solution for Data Providers. Service Providers use the OAI interfaces of the
48447 Data Providers to harvest and store metadata. Note that this means that there are no live
48448 search requests to the Data Providers; rather, services are based on the harvested data via
48450 <para>Koha at present can only act as a Data Provider. It can not harvest from other
48451 repositories. The biggest stumbling block to having Koha harvest from other repositories is
48452 that MARC is the only metadata format that Koha indexes natively. Visit <ulink url="http://www.oaforum.org/tutorial/english/page3.htm">http://www.oaforum.org/tutorial/english/page3.htm</ulink> for diagrams of how OAI-PMH
48454 <para>Learn more about OAI-PMH at: <ulink url="http://www.openarchives.org/pmh/">http://www.openarchives.org/pmh/</ulink></para>
48455 <para>To enable OAI-PMH in Koha edit the <link linkend="OAI-PMH">OAI-PMH</link> preference.
48456 Once enabled you can visit http://YOURKOHACATALOG/cgi-bin/koha/oai.pl to see your
48459 <section id="oaiconfsample">
48460 <title><link linkend="oaiconfsample">Sample OAI Conf File</link></title>
48462 <para><programlisting> format:
48465 metadataNamespace: http://veryspecial.tamil.fr/vs/format-pivot/1.1/vs
48466 schema: http://veryspecial.tamil.fr/vs/format-pivot/1.1/vs.xsd
48467 xsl_file: /usr/local/koha/xslt/vs.xsl
48469 metadataPrefix: marxml
48470 metadataNamespace: http://www.loc.gov/MARC21/slim
48471 http://www.loc.gov/standards/marcxml/schema/MARC21slim
48472 schema: http://www.loc.gov/MARC21/slim
48473 http://www.loc.gov/standards/marcxml/schema/MARC21slim.xsd
48475 metadataPrefix: oai_dc
48476 metadataNamespace: http://www.openarchives.org/OAI/2.0/oai_dc/
48477 schema: http://www.openarchives.org/OAI/2.0/oai_dc.xsd
48479 /usr/local/koha/koha-tmpl/intranet-tmpl/xslt/UNIMARCslim2OAIDC.xsl</programlisting></para>
48482 <section id="Rest-services">
48483 <title><link linkend="Rest-services">REST services</link></title>
48485 <para>Koha can now be requested by REST http requests. BibLibre wrotes an external module to adds more possibilities than ILS-DI can provide.There is no authentication process, but authorized ips are listed in the config file. Services have been tested in 3.10, 3.12 and 3.14 koha versions. You can find more information about it into README file and opac/rest.pl documentation on http://git.biblibre.com. If you want to add features, send us a patch at dev_patches AT biblibre DOT com.</para>
48486 <para>Services provided in 1.4 version are:
48489 GET user/byid/:borrowernumber/holds
48490 GET user/:user_name/holds
48491 GET user/byid/:borrowernumber/issues
48492 GET user/:user_name/issues
48493 GET user/:user_name/issues_history
48494 GET user/byid/:borrowernumber/issues_history
48498 PUT user/:user_name
48499 GET biblio/:biblionumber/items
48500 GET biblio/:biblionumber/holdable
48501 GET biblio/:biblionumber/items_holdable_status
48502 GET item/:itemnumber/holdable
48503 PUT auth/change_password
48505 GET /suggestions/:suggestionid
48507 PUT /suggestions/:suggestionid
48508 DELETE /suggestions/:suggestionid
48515 <title>Using the SRU server</title>
48517 <section id="usingsru">
48521 <firstname>Nicolas</firstname>
48522 <surname>Morin</surname>
48524 <orgname>BibLibre</orgname>
48529 <firstname>Nicole C.</firstname>
48530 <surname>Engard</surname>
48531 <contrib>Edits where necessary.</contrib>
48535 <pubdate>December 2009</pubdate>
48537 <title><link linkend="usingsru">Using the SRU server</link></title>
48539 <para>Koha implements the Search/Retrieve via URL (SRU) protocol. More
48540 information about the protocol itself can be found at <ulink url="http://www.loc.gov/standards/sru/">http://www.loc.gov/standards/sru/</ulink>.
48541 The version implemented is version 1.1.</para>
48543 <section id="sru_explain">
48544 <title><link linkend="sru_explain">Explain</link></title>
48546 <para>If you want to have information about the implementation of SRU
48547 on a given server, you should have access to the Explain file using a
48548 request to the server without any parameter. Like
48549 <http://myserver.com:9999/biblios/>. The response from the
48550 server is an XML file that should look like the following and will
48551 give you information about the default settings of the SRU
48555 <zs:explainResponse>
48556 <zs:version>1.1</zs:version>
48558 <zs:recordSchema>http://explain.z3950.org/dtd/2.0/</zs:recordSchema>
48559 <zs:recordPacking>xml</zs:recordPacking>
48560 <zs:recordData>
48561 <explain xml:base="zebradb/explain-biblios.xml">
48563 try stylesheet url: http://./?stylesheet=docpath/sru2.xsl
48565 <serverInfo protocol="SRW/SRU/Z39.50">
48566 <host>biblibre</host>
48567 <port>9999</port>
48568 <database>biblios</database>
48569 </serverInfo>
48570 <databaseInfo>
48571 <title lang="en" primary="true">Koha 3 Bibliographic SRU/SRW/Z39.50 server</title>
48572 <description lang="en" primary="true">Koha 3 Bibliographic Server</description>
48574 <sru>http://biblibre:9999</sru>
48576 </databaseInfo>
48578 <set name="cql" identifier="info:srw/cql-context-set/1/cql-v1.1">
48579 <title>CQL Standard Set</title>
48581 <index search="true" scan="true" sort="false">
48582 <title lang="en">CQL Server Choice</title>
48584 <name set="cql">serverChoice</name>
48587 <attr type="1" set="bib1">text</attr>
48590 <index search="true" scan="true" sort="false">
48591 <title lang="en">CQL All</title>
48593 <name set="cql">all</name>
48596 <attr type="1" set="bib1">text</attr>
48599 <!-- Record ID index -->
48600 <index search="true" scan="true" sort="false">
48601 <title lang="en">Record ID</title>
48603 <name set="rec">id</name>
48606 <attr type="1" set="bib1">rec:id</attr>
48607 <attr type="4" set="bib1">3</attr>
48613 <section id="sru_search">
48614 <title><link linkend="sru_search">Search</link></title>
48617 http://myserver.com:9999/biblios?version=1.1&operation=searchRetrieve&query=reefs
48618 is composed of the following elements:</para>
48622 <para>base url of the SRU server :
48623 http://myserver.com:9999/biblios?</para>
48627 <para>search part with the 3 required parameters : version,
48628 operation and query. The parameters within the search part should
48629 be of the key=value form, and can be combined with the &
48634 <para>One can add optional parameters to the query, for instance
48635 maximumRecords indicating the maximum number of records to be returned
48637 http://myserver.com:9999/biblios?version=1.1&operation=searchRetrieve&query=reefs&maximumRecords=5
48638 will only get the first 5 results results from the server.</para>
48640 <para><ulink url="http://www.loc.gov/standards/sru/sru1-1archive/search-retrieve-operation.html">http://www.loc.gov/standards/sru/sru1-1archive/search-retrieve-operation.html</ulink>
48641 gives more details about the search operations and in particular the
48642 list of optional parameters for searching.</para>
48644 <section id="sru_search_more_details">
48645 <title><link linkend="sru_search_more_details">More details about Search</link></title>
48647 <para>The "operation" key can take two values: scan or
48648 searchRetrieve.</para>
48650 <para>If operation=searchRetrieve, then the search key should be
48651 query. As in : operation=searchRetrieve&query=reefs</para>
48653 <para>If operation=scan, then the search key should be scanClause.
48654 As in : operation=scan&scanClause=reefs</para>
48656 <para>etc/zebradb/biblios/etc/bib1.att defines Zebra/3950 indexes
48657 that exist on your system. For instance you'll see that we have
48658 indexes for Subject and for Title: att 21 Subject and att 4 Title
48659 respectively.</para>
48661 <para>In the pqf.properties file located under
48662 etc/zebradb/pqf.properties I see that an access point already uses
48663 my Subject index (index.dc.subject = 1=21) while another uses my
48664 Title index (index.dc.title = 1=4) I know this is my Subject index
48665 because as I've seen just before in my bib1.att file, it's called
48666 with =1=21 in Z3950: so index.dc.subject = 1=21 correctly points to
48667 my Subject index. And Title was called with 1=4 so index.dc.title =
48668 1=4 correctly points to my Title index. I can now construct my query
48669 just like I would in a search box, just preceding it with the
48670 "query" key: query=Subject=reefs and Title=coral searches "reefs" in
48671 the subject and "coral" in the title. The full url would be
48672 http://myserver.com:9999/biblios?version=1.1&operation=searchRetrieve&query=Subject=reefs
48673 and Title=coral If I want to limit the result set to just 5 records,
48675 http://myserver.com:9999/biblios?version=1.1&operation=searchRetrieve&query=Subject=reefs
48676 and Title=coral&maximumRecords=5</para>
48678 <para>I can also play with truncate, relations, etc. Those are also
48679 defined in my pqf.properties file. I can see for instance the
48680 position properties defined as:</para>
48683 position.first = 3=1 6=1
48685 position.any = 3=3 6=1
48686 # "any position in field"
48689 <para>So as an example if I want "coral" to be at the beginning of
48690 the title, I can do this query :
48691 http://myserver.com:9999/biblios?version=1.1&operation=searchRetrieve&query=Title=coral
48696 <section id="sru_retrieve">
48697 <title><link linkend="sru_retrieve">Retrieve</link></title>
48699 <para>My search for
48700 http://univ_lyon3.biblibre.com:9999/biblios?version=1.1&operation=searchRetrieve&query=coral
48701 reefs&maximumRecords=1 retrieves just on record. The response
48702 looks like this:</para>
48705 <zs:searchRetrieveResponse>
48706 <zs:version>1.1</zs:version>
48707 <zs:numberOfRecords>1</zs:numberOfRecords>
48710 <zs:recordPacking>xml</zs:recordPacking>
48711 <zs:recordData>
48712 <record xsi:schemaLocation="http://www.loc.gov/MARC21/slim http://www.loc.gov/ standards/marcxml/schema/MARC21slim.xsd">
48713 <leader> cam a22 4500</leader>
48714 <datafield tag="010" ind1=" " ind2=" ">
48715 <subfield code="a">2-603-01193-6</subfield>
48716 <subfield code="b">rel.</subfield>
48717 <subfield code="d">159 F</subfield>
48719 <datafield tag="020" ind1=" " ind2=" ">
48720 <subfield code="a">FR</subfield>
48721 <subfield code="b">00065351</subfield>
48723 <datafield tag="101" ind1="1" ind2=" ">
48724 <subfield code="c">ita</subfield>
48726 <datafield tag="105" ind1=" " ind2=" ">
48727 <subfield code="a">a z 00|y|</subfield>
48729 <datafield tag="106" ind1=" " ind2=" ">
48730 <subfield code="a">r</subfield>
48732 <datafield tag="100" ind1=" " ind2=" ">
48733 <subfield code="a">20091130 frey50 </subfield>
48735 <datafield tag="200" ind1="1" ind2=" ">
48736 <subfield code="a">Guide des récifs coralliens / A Guide to Coral Reefs</subfield>
48737 <subfield code="b">Texte imprimé</subfield>
48738 <subfield code="e">la faune sous-marine des coraux</subfield>
48739 <subfield code="f">A. et A. Ferrari</subfield>
48741 <datafield tag="210" ind1=" " ind2=" ">
48742 <subfield code="a">Lausanne</subfield>
48743 <subfield code="a">Paris</subfield>
48744 <subfield code="c">Delachaux et Niestlé</subfield>
48745 <subfield code="d">cop. 2000</subfield>
48746 <subfield code="e">impr. en Espagne</subfield>
48748 <datafield tag="215" ind1=" " ind2=" ">
48749 <subfield code="a">287 p.</subfield>
48750 <subfield code="c">ill. en coul., couv. ill. en coul.</subfield>
48751 <subfield code="d">20 cm</subfield>
48755 <size>4725</size>
48756 <localnumber>2</localnumber>
48757 <filename>/tmp/nw10BJv9Pk/upd_biblio/exported_records</filename>
48760 </zs:recordData>
48761 <zs:recordPosition>1</zs:recordPosition>
48763 </zs:records>
48764 </zs:searchRetrieveResponse>
48770 <appendix id="coverflow">
48775 <firstname>Kyle</firstname>
48776 <surname>Hall</surname>
48778 <orgname>ByWater Solutions</orgname>
48783 <firstname>Nicole C.</firstname>
48784 <surname>Engard</surname>
48788 <pubdate>2014</pubdate>
48790 <title>New titles slider for OPAC</title>
48791 <para>Often times libraries will want to add a flowing widget with new materials at the library
48792 to their main public catalog page. To do this you can use a widget from any number of
48793 services (usually for a cost) or you can <link linkend="pluginsystem">enable plugins</link> in
48794 Koha and use the <ulink url="http://git.bywatersolutions.com/koha-plugins.git/shortlog/refs/heads/cover_flow">Cover
48795 Flow plugin</ulink> which is based on the <ulink url="https://github.com/drien/jquery-flipster">Flipster</ulink>, a responsive jQuery
48796 coverflow plugin.</para>
48797 <para>Once the plugin is installed, the steps to get your coverflow to show up are as
48799 <para>First, you need to create one or more public reports for your coverflow widget or widgets
48800 to be based on. This is how the plugin knows what the content of your widget should contain.
48801 Each report needs only three columns; title, biblionumber, and isbn. It is important that you
48802 have a good and valid isbn, as that is the datum used to actually fetch the cover. In the
48803 iteration of the plugin, we are using Amazon cover images, but I believe in the end I will
48804 make the cover image fetcher configurable so we can use any data source for cover image
48806 <para>Second, we need to configure the plugin. The plugin configuration is a single text area
48807 that uses YAML ( actually, it’s JSON, whcih is a subset of YAML ) to store the configuration
48808 options. In this example it looks like
48809 this:<programlisting>- id: 42
48810 selector: #coverflow
48812 style: coverflow</programlisting></para>
48813 <para>In this example, we are telling the plugin to use the report with id 42, and use it to
48814 create a coverflow widget to replace the HTML element with the id “coverflow”. The options
48815 list is passed directly to Flipster, so any options supported by Flipster can be set from the
48816 plugin configuration! In fact, in addition to the traditional coverflow, Flipster has a
48817 “carousel” mode which is a much more compact version of the coverflow. You can also configure
48818 which cover the widget will start on, among other options.</para>
48819 <para>At the time the plugins options are saved or updated, the plugin will then generate some
48820 minified JavaScript code that is automatically stored in the Koha system preference
48821 OPACUserJS. Here is an example of the
48822 output:<programlisting>/* JS for Koha CoverFlow Plugin
48823 This JS was added automatically by installing the CoverFlow plugin
48824 Please do not modify */$(document).ready(function(){$.getScript("/plugin/Koha/Plugin/Com/ByWaterSolutions/CoverFlow/jquery-flipster/src/js/jquery.flipster.min.js",function(data,textStatus,jqxhr){$("head").append("<link id='flipster-css' href='/plugin/Koha/Plugin/Com/ByWaterSolutions/CoverFlow/jquery-flipster/src/css/jquery.flipster.min.css' type='text/css' rel='stylesheet' />");$('#coverflow').load("/coverflow.pl?id=42",function(){var opt={'items':'.item','minfactor':15,'distribution':1.5,'scalethreshold':0,'staticbelowthreshold':false,'titleclass':'itemTitle','selectedclass':'selectedItem','scrollactive':true,'step':{'limit':4,'width':10,'scale':true}};$('#coverflow').flipster({style:'coverflow',});});});});
48825 /* End of JS for Koha CoverFlow Plugin */</programlisting></para>
48826 <para>Why do this? For speed! Rather than regenerating this code each and every time the page
48827 loads, we can generate it once, and use it over and over again.</para>
48828 <para>If you inspect the code closely, you’ll notice it references a script “coverflow.pl”. This
48829 is a script that is included with the coverflow plugin. Since we need to access this from the
48830 OPAC ( and we don’t want to set off any XSS attack alarms ), we need to modify the web server
48831 configuration for the public catalog and add the followup to
48832 it:<programlisting>ScriptAlias /coverflow.pl "/var/lib/koha/mykoha/plugins/Koha/Plugin/Com/ByWaterSolutions/CoverFlow/coverflow.pl"</programlisting></para>
48833 <para>This line gives us access to the coverflow.pl script from the OPAC. This script retrieves
48834 the report data and passes it back to the public catalog for creating the coverflow widget.
48835 Koha::Cache is supported in order to make the widget load as quickly as possible!</para>
48836 <para>The final step is to put your selector element somewhere in your public catalog. In this
48837 example, I put the following in the system preference
48838 OpacMainUserBlock:<programlisting><span id="coverflow">Loading...</span></programlisting></para>
48839 <para>Once that is in place, you need only refresh your OPAC page, and there you have it, your
48840 very own catalog coverflow widget! Not only do these coverflows look great on a computer
48841 screen, but they look great on mobile platforms as well, and are even touch responsive!<screenshot>
48842 <screeninfo>Coverflow Widget</screeninfo>
48845 <imagedata fileref="images/appendix-coverflow/coverflow_2-300x170.gif"/>
48848 </screenshot></para>
48851 <appendix id="sysprefdefaults">
48852 <title>System Preference Defaults</title>
48856 <section id="isbddefaults">
48857 <title><link linkend="isbddefaults">ISBD Defaults</link></title>
48859 <para>Default values for the <link linkend="isbdpref">ISBD</link> preference.</para>
48861 <section id="isbddefault">
48862 <title><link linkend="isbddefault">MARC Default</link></title>
48864 <para>#100||{ 100a }{ 100b }{ 100c }{ 100d }{ 110a }{ 110b }{ 110c }{
48865 110d }{ 110e }{ 110f }{ 110g }{ 130a }{ 130d }{ 130f }{ 130g }{ 130h
48866 }{ 130k }{ 130l }{ 130m }{ 130n }{ 130o }{ 130p }{ 130r }{ 130s }{
48867 130t }|<br/><br/></para>
48869 <para>#245||{ 245a }{ 245b }{245f }{ 245g }{ 245k }{ 245n }{ 245p }{
48870 245s }{ 245h }|</para>
48872 <para>#246||{ : 246i }{ 246a }{ 246b }{ 246f }{ 246g }{ 246n }{ 246p
48875 <para>#242||{ = 242a }{ 242b }{ 242n }{ 242p }{ 242h }|</para>
48877 <para>#245||{ 245c }|</para>
48879 <para>#242||{ = 242c }|</para>
48881 <para>#250| - |{ 250a }{ 250b }|</para>
48883 <para>#254|, |{ 254a }|</para>
48885 <para>#255|, |{ 255a }{ 255b }{ 255c }{ 255d }{ 255e }{ 255f }{ 255g
48888 <para>#256|, |{ 256a }|</para>
48890 <para>#257|, |{ 257a }|</para>
48892 <para>#258|, |{ 258a }{ 258b }|</para>
48894 <para>#260| - |{ 260a }{ 260b }{ 260c }|</para>
48896 <para>#300| - |{ 300a }{ 300b }{ 300c }{ 300d }{ 300e }{ 300f }{ 300g
48899 <para>#306| - |{ 306a }|</para>
48901 <para>#307| - |{ 307a }{ 307b }|</para>
48903 <para>#310| - |{ 310a }{ 310b }|</para>
48905 <para>#321| - |{ 321a }{ 321b }|</para>
48907 <para>#340| - |{ 3403 }{ 340a }{ 340b }{ 340c }{ 340d }{ 340e }{ 340f
48908 }{ 340h }{ 340i }|</para>
48910 <para>#342| - |{ 342a }{ 342b }{ 342c }{ 342d }{ 342e }{ 342f }{ 342g
48911 }{ 342h }{ 342i }{ 342j }{ 342k }{ 342l }{ 342m }{ 342n }{ 342o }{
48912 342p }{ 342q }{ 342r }{ 342s }{ 342t }{ 342u }{ 342v }{ 342w }|</para>
48914 <para>#343| - |{ 343a }{ 343b }{ 343c }{ 343d }{ 343e }{ 343f }{ 343g
48915 }{ 343h }{ 343i }|</para>
48917 <para>#351| - |{ 3513 }{ 351a }{ 351b }{ 351c }|</para>
48919 <para>#352| - |{ 352a }{ 352b }{ 352c }{ 352d }{ 352e }{ 352f }{ 352g
48920 }{ 352i }{ 352q }|</para>
48922 <para>#362| - |{ 362a }{ 351z }|</para>
48924 <para>#440| - |{ 440a }{ 440n }{ 440p }{ 440v }{ 440x }|.</para>
48926 <para>#490| - |{ 490a }{ 490v }{ 490x }|.</para>
48928 <para>#800| - |{ 800a }{ 800b }{ 800c }{ 800d }{ 800e }{ 800f }{ 800g
48929 }{ 800h }{ 800j }{ 800k }{ 800l }{ 800m }{ 800n }{ 800o }{ 800p }{
48930 800q }{ 800r }{ 800s }{ 800t }{ 800u }{ 800v }|.</para>
48932 <para>#810| - |{ 810a }{ 810b }{ 810c }{ 810d }{ 810e }{ 810f }{ 810g
48933 }{ 810h }{ 810k }{ 810l }{ 810m }{ 810n }{ 810o }{ 810p }{ 810r }{
48934 810s }{ 810t }{ 810u }{ 810v }|.</para>
48936 <para>#811| - |{ 811a }{ 811c }{ 811d }{ 811e }{ 811f }{ 811g }{ 811h
48937 }{ 811k }{ 811l }{ 811n }{ 811p }{ 811q }{ 811s }{ 811t }{ 811u }{
48940 <para>#830| - |{ 830a }{ 830d }{ 830f }{ 830g }{ 830h }{ 830k }{ 830l
48941 }{ 830m }{ 830n }{ 830o }{ 830p }{ 830r }{ 830s }{ 830t }{ 830v
48944 <para>#500|<br/><br/>|{ 5003 }{ 500a }|</para>
48946 <para>#501|<br/><br/>|{ 501a }|</para>
48948 <para>#502|<br/><br/>|{ 502a }|</para>
48950 <para>#504|<br/><br/>|{ 504a }|</para>
48952 <para>#505|<br/><br/>|{ 505a }{ 505t }{ 505r }{ 505g }{
48955 <para>#506|<br/><br/>|{ 5063 }{ 506a }{ 506b }{ 506c }{
48956 506d }{ 506u }|</para>
48958 <para>#507|<br/><br/>|{ 507a }{ 507b }|</para>
48960 <para>#508|<br/><br/>|{ 508a }{ 508a }|</para>
48962 <para>#510|<br/><br/>|{ 5103 }{ 510a }{ 510x }{ 510c }{
48965 <para>#511|<br/><br/>|{ 511a }|</para>
48967 <para>#513|<br/><br/>|{ 513a }{513b }|</para>
48969 <para>#514|<br/><br/>|{ 514z }{ 514a }{ 514b }{ 514c }{
48970 514d }{ 514e }{ 514f }{ 514g }{ 514h }{ 514i }{ 514j }{ 514k }{ 514m
48973 <para>#515|<br/><br/>|{ 515a }|</para>
48975 <para>#516|<br/><br/>|{ 516a }|</para>
48977 <para>#518|<br/><br/>|{ 5183 }{ 518a }|</para>
48979 <para>#520|<br/><br/>|{ 5203 }{ 520a }{ 520b }{ 520u
48982 <para>#521|<br/><br/>|{ 5213 }{ 521a }{ 521b }|</para>
48984 <para>#522|<br/><br/>|{ 522a }|</para>
48986 <para>#524|<br/><br/>|{ 524a }|</para>
48988 <para>#525|<br/><br/>|{ 525a }|</para>
48990 <para>#526|<br/><br/>|{\n510i }{\n510a }{ 510b }{ 510c }{
48991 510d }{\n510x }|</para>
48993 <para>#530|<br/><br/>|{\n5063 }{\n506a }{ 506b }{ 506c }{
48994 506d }{\n506u }|</para>
48996 <para>#533|<br/><br/>|{\n5333 }{\n533a }{\n533b }{\n533c
48997 }{\n533d }{\n533e }{\n533f }{\n533m }{\n533n }|</para>
48999 <para>#534|<br/><br/>|{\n533p }{\n533a }{\n533b }{\n533c
49000 }{\n533d }{\n533e }{\n533f }{\n533m }{\n533n }{\n533t }{\n533x
49003 <para>#535|<br/><br/>|{\n5353 }{\n535a }{\n535b }{\n535c
49006 <para>#538|<br/><br/>|{\n5383 }{\n538a }{\n538i }{\n538u
49009 <para>#540|<br/><br/>|{\n5403 }{\n540a }{ 540b }{ 540c }{
49010 540d }{\n520u }|</para>
49012 <para>#544|<br/><br/>|{\n5443 }{\n544a }{\n544b }{\n544c
49013 }{\n544d }{\n544e }{\n544n }|</para>
49015 <para>#545|<br/><br/>|{\n545a }{ 545b }{\n545u }|</para>
49017 <para>#546|<br/><br/>|{\n5463 }{\n546a }{ 546b }|</para>
49019 <para>#547|<br/><br/>|{\n547a }|</para>
49021 <para>#550|<br/><br/>|{ 550a }|</para>
49023 <para>#552|<br/><br/>|{ 552z }{ 552a }{ 552b }{ 552c }{
49024 552d }{ 552e }{ 552f }{ 552g }{ 552h }{ 552i }{ 552j }{ 552k }{ 552l
49025 }{ 552m }{ 552n }{ 562o }{ 552p }{ 552u }|</para>
49027 <para>#555|<br/><br/>|{ 5553 }{ 555a }{ 555b }{ 555c }{
49028 555d }{ 555u }|</para>
49030 <para>#556|<br/><br/>|{ 556a }{ 506z }|</para>
49032 <para>#563|<br/><br/>|{ 5633 }{ 563a }{ 563u }|</para>
49034 <para>#565|<br/><br/>|{ 5653 }{ 565a }{ 565b }{ 565c }{
49035 565d }{ 565e }|</para>
49037 <para>#567|<br/><br/>|{ 567a }|</para>
49039 <para>#580|<br/><br/>|{ 580a }|</para>
49041 <para>#581|<br/><br/>|{ 5633 }{ 581a }{ 581z }|</para>
49043 <para>#584|<br/><br/>|{ 5843 }{ 584a }{ 584b }|</para>
49045 <para>#585|<br/><br/>|{ 5853 }{ 585a }|</para>
49047 <para>#586|<br/><br/>|{ 5863 }{ 586a }|</para>
49049 <para>#020|<br/><br/><label>ISBN: </label>|{
49050 020a }{ 020c }|</para>
49052 <para>#022|<br/><br/><label>ISSN: </label>|{
49055 <para>#222| = |{ 222a }{ 222b }|</para>
49057 <para>#210| = |{ 210a }{ 210b }|</para>
49059 <para>#024|<br/><br/><label>Standard No.:
49060 </label>|{ 024a }{ 024c }{ 024d }{ 0242 }|</para>
49062 <para>#027|<br/><br/><label>Standard Tech. Report.
49063 No.: </label>|{ 027a }|</para>
49065 <para>#028|<br/><br/><label>Publisher. No.:
49066 </label>|{ 028a }{ 028b }|</para>
49068 <para>#013|<br/><br/><label>Patent No.:
49069 </label>|{ 013a }{ 013b }{ 013c }{ 013d }{ 013e }{ 013f
49072 <para>#030|<br/><br/><label>CODEN: </label>|{
49075 <para>#037|<br/><br/><label>Source: </label>|{
49076 037a }{ 037b }{ 037c }{ 037f }{ 037g }{ 037n }|</para>
49078 <para>#010|<br/><br/><label>LCCN: </label>|{
49081 <para>#015|<br/><br/><label>Nat. Bib. No.:
49082 </label>|{ 015a }{ 0152 }|</para>
49084 <para>#016|<br/><br/><label>Nat. Bib. Agency Control
49085 No.: </label>|{ 016a }{ 0162 }|</para>
49087 <para>#600|<br/><br/><label>Subjects--Personal
49088 Names: </label>|{\n6003 }{\n600a}{ 600b }{ 600c }{ 600d }{ 600e
49089 }{ 600f }{ 600g }{ 600h }{--600k}{ 600l }{ 600m }{ 600n }{ 600o
49090 }{--600p}{ 600r }{ 600s }{ 600t }{ 600u
49091 }{--600x}{--600z}{--600y}{--600v}|</para>
49093 <para>#610|<br/><br/><label>Subjects--Corporate
49094 Names: </label>|{\n6103 }{\n610a}{ 610b }{ 610c }{ 610d }{ 610e
49095 }{ 610f }{ 610g }{ 610h }{--610k}{ 610l }{ 610m }{ 610n }{ 610o
49096 }{--610p}{ 610r }{ 610s }{ 610t }{ 610u
49097 }{--610x}{--610z}{--610y}{--610v}|</para>
49099 <para>#611|<br/><br/><label>Subjects--Meeting Names:
49100 </label>|{\n6113 }{\n611a}{ 611b }{ 611c }{ 611d }{ 611e }{ 611f
49101 }{ 611g }{ 611h }{--611k}{ 611l }{ 611m }{ 611n }{ 611o }{--611p}{
49102 611r }{ 611s }{ 611t }{ 611u }{--611x}{--611z}{--611y}{--611v}|</para>
49104 <para>#630|<br/><br/><label>Subjects--Uniform
49105 Titles: </label>|{\n630a}{ 630b }{ 630c }{ 630d }{ 630e }{ 630f
49106 }{ 630g }{ 630h }{--630k }{ 630l }{ 630m }{ 630n }{ 630o }{--630p}{
49107 630r }{ 630s }{ 630t }{--630x}{--630z}{--630y}{--630v}|</para>
49109 <para>#648|<br/><br/><label>Subjects--Chronological
49110 Terms: </label>|{\n6483 }{\n648a
49111 }{--648x}{--648z}{--648y}{--648v}|</para>
49113 <para>#650|<br/><br/><label>Subjects--Topical Terms:
49114 </label>|{\n6503 }{\n650a}{ 650b }{ 650c }{ 650d }{ 650e
49115 }{--650x}{--650z}{--650y}{--650v}|</para>
49117 <para>#651|<br/><br/><label>Subjects--Geographic
49118 Terms: </label>|{\n6513 }{\n651a}{ 651b }{ 651c }{ 651d }{ 651e
49119 }{--651x}{--651z}{--651y}{--651v}|</para>
49121 <para>#653|<br/><br/><label>Subjects--Index Terms:
49122 </label>|{ 653a }|</para>
49124 <para>#654|<br/><br/><label>Subjects--Facted Index
49125 Terms: </label>|{\n6543
49126 }{\n654a}{--654b}{--654x}{--654z}{--654y}{--654v}|</para>
49128 <para>#655|<br/><br/><label>Index Terms--Genre/Form:
49129 </label>|{\n6553 }{\n655a}{--655b}{--655x
49130 }{--655z}{--655y}{--655v}|</para>
49132 <para>#656|<br/><br/><label>Index Terms--Occupation:
49133 </label>|{\n6563
49134 }{\n656a}{--656k}{--656x}{--656z}{--656y}{--656v}|</para>
49136 <para>#657|<br/><br/><label>Index Terms--Function:
49137 </label>|{\n6573
49138 }{\n657a}{--657x}{--657z}{--657y}{--657v}|</para>
49140 <para>#658|<br/><br/><label>Index Terms--Curriculum
49142 </label>|{\n658a}{--658b}{--658c}{--658d}{--658v}|</para>
49144 <para>#050|<br/><br/><label>LC Class. No.:
49145 </label>|{ 050a }{ / 050b }|</para>
49147 <para>#082|<br/><br/><label>Dewey Class. No.:
49148 </label>|{ 082a }{ / 082b }|</para>
49150 <para>#080|<br/><br/><label>Universal Decimal Class.
49151 No.: </label>|{ 080a }{ 080x }{ / 080b }|</para>
49153 <para>#070|<br/><br/><label>National Agricultural
49154 Library Call No.: </label>|{ 070a }{ / 070b }|</para>
49156 <para>#060|<br/><br/><label>National Library of
49157 Medicine Call No.: </label>|{ 060a }{ / 060b }|</para>
49159 <para>#074|<br/><br/><label>GPO Item No.:
49160 </label>|{ 074a }|</para>
49162 <para>#086|<br/><br/><label>Gov. Doc. Class. No.:
49163 </label>|{ 086a }|</para>
49165 <para>#088|<br/><br/><label>Report. No.:
49166 </label>|{ 088a }|</para>
49169 <section id="unimarcdefault">
49170 <title><link linkend="unimarcdefault">UNIMARC Default</link></title>
49172 <para>#200|<h2>Title : |{200a}{. 200c}{ : 200e}{200d}{. 200h}{.
49173 200i}|</h2></para>
49175 <para>#461|<label class="ipt">A part of : </label>|<a
49176 href="/cgi-bin/koha/catalogue/search.pl?op=do_search{&q=461t&idx=ti}">{461t}</a>{N∞
49177 461h} {v. 461v}{(461d)}<br/>|</para>
49179 <para>#200b|<label class="ipt">Material Designation :
49180 </label>| {200b }|<br/></para>
49182 <para>#101a|<label class="ipt">Language(s): </label>|<a
49183 href="/cgi-bin/koha/catalogue/search.pl?op=do_search{&q=101a&idx=ln}">{101a}</a>|<br/></para>
49185 <para>#200f|<label class="ipt">Authors : </label>|<a
49186 href="/cgi-bin/koha/catalogue/search.pl?op=do_search{&q=200f&idx=au}">{200f
49187 ; }</a>|<br/></para>
49189 <para>#200g|<label class="ipt">Co-authors : </label>|<a
49190 href="/cgi-bin/koha/catalogue/search.pl?op=do_search{&q=200g&idx=au}">{200g
49191 ; }</a>|<br/></para>
49193 <para>#210a|<br/><label class="ipt">Place of pubblication
49194 : </label>|<a
49195 href="/cgi-bin/koha/catalogue/search.pl?op=do_search&idx=pl&q={210a}">{210a}</a>|<br/></para>
49197 <para>#210c|<label class="ipt">Publisher : </label>|<a
49198 href="/cgi-bin/koha/catalogue/search.pl?op=do_search&idx=pb&q={210c}">{210c
49199 ; }</a>|<br/></para>
49201 <para>#210d|<label class="ipt">Date of pubblication :
49202 </label>|{ 210d}|<br/></para>
49204 <para>#215|<label class="ipt">Description :
49205 </label>|{215a}{ : 215c}{ ; 215d}{ + 215e}|<br/></para>
49207 <para>#225a|<label class="ipt">Series :</label>|<a
49208 href="/cgi-bin/koha/catalogue/search.pl?op=do_search{&q=225a&idx=se}">{225a
49209 ;}</a> |</para>
49211 <para>#225||{ = 225d}{ : 225e}{. 225h}{. 225i}{ / 225f}{, 225x}{ ;
49212 225v}|<br/></para>
49214 <para>#686|<label>Classification : </label>|{ 686a
49215 }|<br/></para>
49217 <para>#608|<label>Form, Genre : </label>|<a
49218 href="/cgi-bin/koha/catalogue/search.pl?op=do_search&idx=su&q={608a}"><img
49219 border="0" src="/opac-tmpl/css/en/images/filefind.png" height="15"
49220 title="Search on {608a}">{
49221 608a}</a>|<br/><br/></para>
49223 <para>#200||<label class="ipt">Subjects :
49224 </label><br/>|<ul></para>
49226 <para>#600|<label class="ipt">Person(s)
49227 </label><br/> |<li><a
49228 href="/cgi-bin/koha/catalogue/search.pl?op=do_search&idx=su&q={600a}"><img
49229 border="0" src="/opac-tmpl/css/en/images/filefind.png" height="15"
49230 title="Search on {600a}">{
49231 600a}</a></li>|<br/></para>
49233 <para>#601|<label class="ipt">Organisation(s)
49234 </label><br/>|<li><a
49235 href="/cgi-bin/koha/catalogue/search.pl?op=do_search&idx=su&q={601a}"><img
49236 border="0" src="/opac-tmpl/css/en/images/filefind.png" height="15"
49237 title="Search on {601a}">{
49238 601a}</a></li>|<br/></para>
49240 <para>#606|<label class="ipt">Term(s)
49241 </label><br/>|<li><a
49242 href="/cgi-bin/koha/catalogue/search.pl?op=do_search&idx=su&q={606a}"><img
49243 border="0" src="/opac-tmpl/css/en/images/filefind.png" height="15"
49244 title="Search on {606a}">{
49245 606a}</a></li>|<br/></para>
49247 <para>#607|<label class="ipt">Place(s)
49248 </label><br/>|<li><a
49249 href="/cgi-bin/koha/catalogue/search.pl?op=do_search&idx=su&q={607a}"><img
49250 border="0" src="/opac-tmpl/css/en/images/filefind.png" height="15"
49251 title="Search on {607a}">{
49252 607a}</a></li>|<br/></para>
49254 <para>#610|<label>Keywords</label><br/>|<li><a
49255 href="/cgi-bin/koha/catalogue/search.pl?op=do_search&idx=su&q={610a}"><img
49256 border="0" src="/opac-tmpl/css/en/images/filefind.png" height="15"
49257 title="Search on {610a}">{ 610a}</a></li>|</para>
49259 <para>#200||</ul>|</para>
49261 <para>#856|<label class="ipt">Electronic resource :
49262 </label>|<a href="{856u}">click here</a> to go to
49263 the external resource<br/></para>
49265 <para>#010|<label class="ipt">ISBN : </label>|{010a
49266 ;}|<br/></para>
49268 <para>#011|<label class="ipt">ISSN : </label>|{011a
49269 ;}|<br/></para>
49271 <para>#200||<label class="ipt">Notes :
49272 </label>|<br/><ul></para>
49274 <para>#300||<li>{300a}</li>|</para>
49276 <para>#307||<li>{307a}</li>|</para>
49278 <para>#310||<li>{310a}</li>|</para>
49280 <para>#326||<li>{326a}</li>|</para>
49282 <para>#327||<li>{327a}</li>|</para>
49284 <para>#333|<li>Public : |{333a}</li>|</para>
49286 <para>#200||</ul>|</para>
49288 <para>#330||<label class="ipt">Abstract :
49289 </label>|<br/></para>
49291 <para>#330||{330a}|<br/></para>
49293 <para>#200||<br/><h2>Items</h2>|</para>
49295 <para>#200|<table>|<th>Call
49296 number</th><th>Copy
49297 note</th><th>Fonds</th><th>Genre
49298 detail</th><th>Circulation
49299 type</th><th>Barcode</th>|</para>
49301 <para>#995||<tr><td> {995k}</td><td>
49302 {995u}</td><td>
49303 {995y}</td><td>{995e} </td><td>
49304 {995o}</td><td>{995f}</td></tr>|</table></para>
49307 <section id="opacisbddefaults">
49308 <title><link linkend="opacisbddefaults">OPACISBD Defaults</link></title>
49309 <para>Default values for the <link linkend="OPACISBD">OPACISBD</link> preference.</para>
49310 <section id="opacisbdmarcdefault">
49311 <title><link linkend="opacisbdmarcdefault">MARC</link></title>
49312 <para>#100||{ 100a }{ 100b }{ 100c }{ 100d }{ 110a }{ 110b }{ 110c }{ 110d }{ 110e }{ 110f
49313 }{ 110g }{ 130a }{ 130d }{ 130f }{ 130g }{ 130h }{ 130k }{ 130l }{ 130m }{ 130n }{ 130o }{
49314 130p }{ 130r }{ 130s }{ 130t }|<br/><br/> </para>
49315 <para>#245||{ 245a }{ 245b }{245f }{ 245g }{ 245k }{ 245n }{ 245p }{ 245s }{ 245h }| </para>
49316 <para>#246||{ : 246i }{ 246a }{ 246b }{ 246f }{ 246g }{ 246n }{ 246p }{ 246h }| </para>
49317 <para>#242||{ = 242a }{ 242b }{ 242n }{ 242p }{ 242h }| </para>
49318 <para>#245||{ 245c }| </para>
49319 <para>#242||{ = 242c }| </para>
49320 <para>#250| - |{ 250a }{ 250b }| </para>
49321 <para>#254|, |{ 254a }| #255|, |{ 255a }{ 255b }{ 255c }{ 255d }{ 255e }{ 255f }{ 255g }|
49322 #256|, |{ 256a }| </para>
49323 <para>#257|, |{ 257a }| </para>
49324 <para>#258|, |{ 258a }{ 258b }| </para>
49325 <para>#260| - |{ 260a }{ 260b }{ 260c }| </para>
49326 <para>#300| - |{ 300a }{ 300b }{ 300c }{ 300d }{ 300e }{ 300f }{ 300g }| </para>
49327 <para>#306| - |{ 306a }| #307| - |{ 307a }{ 307b }| </para>
49328 <para>#310| - |{ 310a }{ 310b }| </para>
49329 <para>#321| - |{ 321a }{ 321b }| </para>
49330 <para>#340| - |{ 3403 }{ 340a }{ 340b }{ 340c }{ 340d }{ 340e }{ 340f }{ 340h }{ 340i }| </para>
49331 <para>#342| - |{ 342a }{ 342b }{ 342c }{ 342d }{ 342e }{ 342f }{ 342g }{ 342h }{ 342i }{
49332 342j }{ 342k }{ 342l }{ 342m }{ 342n }{ 342o }{ 342p }{ 342q }{ 342r }{ 342s }{ 342t }{
49333 342u }{ 342v }{ 342w }| </para>
49334 <para>#343| - |{ 343a }{ 343b }{ 343c }{ 343d }{ 343e }{ 343f }{ 343g }{ 343h }{ 343i }| </para>
49335 <para>#351| - |{ 3513 }{ 351a }{ 351b }{ 351c }| </para>
49336 <para>#352| - |{ 352a }{ 352b }{ 352c }{ 352d }{ 352e }{ 352f }{ 352g }{ 352i }{ 352q }| </para>
49337 <para>#362| - |{ 362a }{ 351z }| </para>
49338 <para>#440| - |{ 440a }{ 440n }{ 440p }{ 440v }{ 440x }|. #490| - |{ 490a }{ 490v }{ 490x
49340 <para>#800| - |{ 800a }{ 800b }{ 800c }{ 800d }{ 800e }{ 800f }{ 800g }{ 800h }{ 800j }{
49341 800k }{ 800l }{ 800m }{ 800n }{ 800o }{ 800p }{ 800q }{ 800r }{ 800s }{ 800t }{ 800u }{
49343 <para>#810| - |{ 810a }{ 810b }{ 810c }{ 810d }{ 810e }{ 810f }{ 810g }{ 810h }{ 810k }{
49344 810l }{ 810m }{ 810n }{ 810o }{ 810p }{ 810r }{ 810s }{ 810t }{ 810u }{ 810v }|. </para>
49345 <para>#811| - |{ 811a }{ 811c }{ 811d }{ 811e }{ 811f }{ 811g }{ 811h }{ 811k }{ 811l }{
49346 811n }{ 811p }{ 811q }{ 811s }{ 811t }{ 811u }{ 811v }|. </para>
49347 <para>#830| - |{ 830a }{ 830d }{ 830f }{ 830g }{ 830h }{ 830k }{ 830l }{ 830m }{ 830n }{
49348 830o }{ 830p }{ 830r }{ 830s }{ 830t }{ 830v }|. </para>
49349 <para>#500|<br/><br/>|{ 5003 }{ 500a }| </para>
49350 <para>#501|<br/><br/>|{ 501a }| </para>
49351 <para>#502|<br/><br/>|{ 502a }| </para>
49352 <para>#504|<br/><br/>|{ 504a }| </para>
49353 <para>#505|<br/><br/>|{ 505a }{ 505t }{ 505r }{ 505g }{ 505u }| </para>
49354 <para>#506|<br/><br/>|{ 5063 }{ 506a }{ 506b }{ 506c }{ 506d }{ 506u }| </para>
49355 <para>#507|<br/><br/>|{ 507a }{ 507b }| #508|<br/><br/>|{ 508a }{ 508a }| </para>
49356 <para>#510|<br/><br/>|{ 5103 }{ 510a }{ 510x }{ 510c }{ 510b }| </para>
49357 <para>#511|<br/><br/>|{ 511a }| </para>
49358 <para>#513|<br/><br/>|{ 513a }{513b }| </para>
49359 <para>#514|<br/><br/>|{ 514z }{ 514a }{ 514b }{ 514c }{ 514d }{ 514e }{ 514f }{ 514g
49360 }{ 514h }{ 514i }{ 514j }{ 514k }{ 514m }{ 514u }| </para>
49361 <para>#515|<br/><br/>|{ 515a }|</para>
49362 <para> #516|<br/><br/>|{ 516a }| </para>
49363 <para>#518|<br/><br/>|{ 5183 }{ 518a }| </para>
49364 <para>#520|<br/><br/>|{ 5203 }{ 520a }{ 520b }{ 520u }| </para>
49365 <para>#521|<br/><br/>|{ 5213 }{ 521a }{ 521b }| </para>
49366 <para>#522|<br/><br/>|{ 522a }| </para>
49367 <para>#524|<br/><br/>|{ 524a }| </para>
49368 <para>#525|<br/><br/>|{ 525a }| </para>
49369 <para>#526|<br/><br/>|{\n510i }{\n510a }{ 510b }{ 510c }{ 510d }{\n510x }| </para>
49370 <para>#530|<br/><br/>|{\n5063 }{\n506a }{ 506b }{ 506c }{ 506d }{\n506u }| </para>
49371 <para>#533|<br/><br/>|{\n5333 }{\n533a }{\n533b }{\n533c }{\n533d }{\n533e }{\n533f
49372 }{\n533m }{\n533n }| </para>
49373 <para>#534|<br/><br/>|{\n533p }{\n533a }{\n533b }{\n533c }{\n533d }{\n533e }{\n533f
49374 }{\n533m }{\n533n }{\n533t }{\n533x }{\n533z }| </para>
49375 <para>#535|<br/><br/>|{\n5353 }{\n535a }{\n535b }{\n535c }{\n535d }| </para>
49376 <para>#538|<br/><br/>|{\n5383 }{\n538a }{\n538i }{\n538u }| </para>
49377 <para>#540|<br/><br/>|{\n5403 }{\n540a }{ 540b }{ 540c }{ 540d }{\n520u }| </para>
49378 <para>#544|<br/><br/>|{\n5443 }{\n544a }{\n544b }{\n544c }{\n544d }{\n544e }{\n544n }| </para>
49379 <para>#545|<br/><br/>|{\n545a }{ 545b }{\n545u }| #546|<br/><br/>|{\n5463
49380 }{\n546a }{ 546b }| </para>
49381 <para>#547|<br/><br/>|{\n547a }| #550|<br/><br/>|{ 550a }| </para>
49382 <para>#552|<br/><br/>|{ 552z }{ 552a }{ 552b }{ 552c }{ 552d }{ 552e }{ 552f }{ 552g
49383 }{ 552h }{ 552i }{ 552j }{ 552k }{ 552l }{ 552m }{ 552n }{ 562o }{ 552p }{ 552u }| </para>
49384 <para>#555|<br/><br/>|{ 5553 }{ 555a }{ 555b }{ 555c }{ 555d }{ 555u }| </para>
49385 <para>#556|<br/><br/>|{ 556a }{ 506z }| #563|<br/><br/>|{ 5633 }{ 563a }{ 563u
49387 <para>#565|<br/><br/>|{ 5653 }{ 565a }{ 565b }{ 565c }{ 565d }{ 565e }| </para>
49388 <para>#567|<br/><br/>|{ 567a }| </para>
49389 <para>#580|<br/><br/>|{ 580a }| </para>
49390 <para>#581|<br/><br/>|{ 5633 }{ 581a }{ 581z }| </para>
49391 <para>#584|<br/><br/>|{ 5843 }{ 584a }{ 584b }| </para>
49392 <para>#585|<br/><br/>|{ 5853 }{ 585a }| </para>
49393 <para>#586|<br/><br/>|{ 5863 }{ 586a }| </para>
49394 <para>#020|<br/><br/><label>ISBN: </label>|{ 020a }{ 020c }| </para>
49395 <para>#022|<br/><br/><label>ISSN: </label>|{ 022a }| </para>
49396 <para>#222| = |{ 222a }{ 222b }| </para>
49397 <para>#210| = |{ 210a }{ 210b }| </para>
49398 <para>#024|<br/><br/><label>Standard No.: </label>|{ 024a }{ 024c }{ 024d }{
49400 <para>#027|<br/><br/><label>Standard Tech. Report. No.: </label>|{ 027a }| </para>
49401 <para>#028|<br/><br/><label>Publisher. No.: </label>|{ 028a }{ 028b }| </para>
49402 <para>#013|<br/><br/><label>Patent No.: </label>|{ 013a }{ 013b }{ 013c }{ 013d
49403 }{ 013e }{ 013f }| </para>
49404 <para>#030|<br/><br/><label>CODEN: </label>|{ 030a }| </para>
49405 <para>#037|<br/><br/><label>Source: </label>|{ 037a }{ 037b }{ 037c }{ 037f }{
49406 037g }{ 037n }| </para>
49407 <para>#010|<br/><br/><label>LCCN: </label>|{ 010a }| </para>
49408 <para>#015|<br/><br/><label>Nat. Bib. No.: </label>|{ 015a }{ 0152 }| </para>
49409 <para>#016|<br/><br/><label>Nat. Bib. Agency Control No.: </label>|{ 016a }{
49411 <para>#600|<br/><br/><label>Subjects--Personal Names: </label>|{\n6003
49412 }{\n600a}{ 600b }{ 600c }{ 600d }{ 600e }{ 600f }{ 600g }{ 600h }{--600k}{ 600l }{ 600m }{
49413 600n }{ 600o }{--600p}{ 600r }{ 600s }{ 600t }{ 600u }{--600x}{--600z}{--600y}{--600v}| </para>
49414 <para>#610|<br/><br/><label>Subjects--Corporate Names: </label>|{\n6103
49415 }{\n610a}{ 610b }{ 610c }{ 610d }{ 610e }{ 610f }{ 610g }{ 610h }{--610k}{ 610l }{ 610m }{
49416 610n }{ 610o }{--610p}{ 610r }{ 610s }{ 610t }{ 610u }{--610x}{--610z}{--610y}{--610v}| </para>
49417 <para>#611|<br/><br/><label>Subjects--Meeting Names: </label>|{\n6113 }{\n611a}{
49418 611b }{ 611c }{ 611d }{ 611e }{ 611f }{ 611g }{ 611h }{--611k}{ 611l }{ 611m }{ 611n }{
49419 611o }{--611p}{ 611r }{ 611s }{ 611t }{ 611u }{--611x}{--611z}{--611y}{--611v}| </para>
49420 <para>#630|<br/><br/><label>Subjects--Uniform Titles: </label>|{\n630a}{ 630b }{
49421 630c }{ 630d }{ 630e }{ 630f }{ 630g }{ 630h }{--630k }{ 630l }{ 630m }{ 630n }{ 630o
49422 }{--630p}{ 630r }{ 630s }{ 630t }{--630x}{--630z}{--630y}{--630v}| </para>
49423 <para>#648|<br/><br/><label>Subjects--Chronological Terms: </label>|{\n6483
49424 }{\n648a }{--648x}{--648z}{--648y}{--648v}|
49425 #650|<br/><br/><label>Subjects--Topical Terms: </label>|{\n6503 }{\n650a}{
49426 650b }{ 650c }{ 650d }{ 650e }{--650x}{--650z}{--650y}{--650v}| </para>
49427 <para>#651|<br/><br/><label>Subjects--Geographic Terms: </label>|{\n6513
49428 }{\n651a}{ 651b }{ 651c }{ 651d }{ 651e }{--651x}{--651z}{--651y}{--651v}| </para>
49429 <para>#653|<br/><br/><label>Subjects--Index Terms: </label>|{ 653a }| </para>
49430 <para>#654|<br/><br/><label>Subjects--Facted Index Terms: </label>|{\n6543
49431 }{\n654a}{--654b}{--654x}{--654z}{--654y}{--654v}| </para>
49432 <para>#655|<br/><br/><label>Index Terms--Genre/Form: </label>|{\n6553
49433 }{\n655a}{--655b}{--655x }{--655z}{--655y}{--655v}| </para>
49434 <para>#656|<br/><br/><label>Index Terms--Occupation: </label>|{\n6563
49435 }{\n656a}{--656k}{--656x}{--656z}{--656y}{--656v}| </para>
49436 <para>#657|<br/><br/><label>Index Terms--Function: </label>|{\n6573
49437 }{\n657a}{--657x}{--657z}{--657y}{--657v}| </para>
49438 <para>#658|<br/><br/><label>Index Terms--Curriculum Objective:
49439 </label>|{\n658a}{--658b}{--658c}{--658d}{--658v}| </para>
49440 <para>#050|<br/><br/><label>LC Class. No.: </label>|{ 050a }{ / 050b }| </para>
49441 <para>#082|<br/><br/><label>Dewey Class. No.: </label>|{ 082a }{ / 082b }| </para>
49442 <para>#080|<br/><br/><label>Universal Decimal Class. No.: </label>|{ 080a }{
49443 080x }{ / 080b }| </para>
49444 <para>#070|<br/><br/><label>National Agricultural Library Call No.: </label>|{
49445 070a }{ / 070b }| </para>
49446 <para>#060|<br/><br/><label>National Library of Medicine Call No.: </label>|{
49447 060a }{ / 060b }| </para>
49448 <para>#074|<br/><br/><label>GPO Item No.: </label>|{ 074a }| </para>
49449 <para>#086|<br/><br/><label>Gov. Doc. Class. No.: </label>|{ 086a }| </para>
49450 <para>#088|<br/><br/><label>Report. No.: </label>|{ 088a }|</para>
49455 <appendix id="receiptprint">
49456 <title>Configuring Receipt Printers</title>
49458 <para>The following instructions are for specific receipt printers, but
49459 can probably be used to help with setup of other brands as well.</para>
49461 <section id="epsonprinters">
49463 <corpauthor>NEKLS</corpauthor>
49465 <pubdate>2008</pubdate>
49467 <bibliosource><ulink url="http://www.nexpresslibrary.org/go-live/configure-your-receipt-printers/">http://www.nexpresslibrary.org/go-live/configure-your-receipt-printers/</ulink></bibliosource>
49470 <title><link linkend="epsonprinters">For Epson TM-T88III (3) & TM-T88IV (4) Printers</link></title>
49474 <section id="epsonprintdriver">
49475 <title><link linkend="epsonprintdriver">In the Print Driver</link></title>
49477 <para>For these instructions, we are using version 5,0,3,0 of the
49478 Epson TM-T88III print driver; the EPSON TM-T88IV version is ReceiptE4.
49479 Register at the <ulink url="https://www.epsonexpert.com/login">EpsonExpert Technical Resource
49480 Center website</ulink> to gain access to the drivers; go to Technical
49481 Resources, then choose the printer model from the Printers drop-down
49484 <para>Click Start > Printers and Faxes > Right click the receipt
49485 printer > Properties:</para>
49489 <para>Advanced Tab, click Printing Defaults button</para>
49493 <para>Layout Tab: Paper size: Roll Paper 80 x 297mm</para>
49497 <para>TM-T88III: Layout Tab: Check Reduce Printing and Fit to
49498 Printable Width</para>
49502 <para>TM-T88IV: Check Reduced Size Print; Click OK on the popup
49503 window that appears. Fit to Printable Width should be
49504 automatically selected.</para>
49508 <para>OK your way out of there.</para>
49513 <section id="epsonfirefox">
49514 <title><link linkend="epsonfirefox">In Firefox</link></title>
49516 <para>Under File > Page Setup:</para>
49520 <para>Shrink to fit page on Format & Options tab</para>
49524 <para>0,0,0,0 for Margins on Margins & Header/Footer Tab. This
49525 makes the receipts use all available space on the paper
49530 <para>Set all Headers/Footers to -blank-. This removes all of the
49531 gunk you might normally find on a print from Firefox, such as the
49532 URL, number of pages, etc.</para>
49536 <para>Click OK</para>
49540 <para>Set the default printer settings in Firefox so you don't see a
49541 "Print" dialog:</para>
49545 <para>Go to File > Print</para>
49549 <para>Set the Printer to the receipt printer.</para>
49553 <para>Click the Advanced (or Properties) button</para>
49557 <para>Layout Tab: Paper size: Roll Paper 80 x 297mm</para>
49561 <para>TM-T88III: Layout Tab: Check Reduce Printing and Fit to
49562 Printable Width</para>
49566 <para>TM-T88IV: Check Reduced Size Print; click OK on the popup
49567 window that appears. Fit to Printable Width should be
49568 automatically selected.</para>
49572 <para>OK your way out, go ahead and print whatever page you are
49577 <para>Type about:config, in the address bar. Click "I'll be
49578 careful, I promise!" on the warning message.</para>
49582 <para>Type, print.always in Filter.</para>
49586 <para>Look for print.always_print_silent.</para>
49590 <para>If the preference is there then set the value to
49597 <para>If the preference is not there (and it shouldn't be in most
49598 browsers) you have to add the preference.</para>
49602 <para>Right click the preference area and select New >
49607 <para>Type print.always_print_silent in the dialog box and set
49608 the value to True. This sets the print settings in Firefox to
49609 always use the same settings and print without showing a
49617 <para>Setting the print.always_print_silent setting in about:config
49618 DISABLES the ability to choose a printer in Firefox.</para>
49623 <section id="epson2">
49625 <corpauthor>NEKLS</corpauthor>
49627 <pubdate>2008</pubdate>
49629 <bibliosource><ulink url="http://www.nexpresslibrary.org/go-live/configure-your-receipt-printers/">http://www.nexpresslibrary.org/go-live/configure-your-receipt-printers/</ulink></bibliosource>
49632 <title><link linkend="epson2">For Epson TM-T88II (2) Printers</link></title>
49634 <para>Register at the <ulink url="https://www.epsonexpert.com/login">EpsonExpert Technical Resource
49635 Center website</ulink> to gain access to the drivers; go to Technical
49636 Resources, then choose the printer model from the Printers drop-down
49639 <section id="epson2firefox">
49640 <title><link linkend="epson2firefox">In Firefox</link></title>
49642 <para>Under File > Page Setup:</para>
49646 <para>Shrink to fit page on Format & Options tab</para>
49650 <para>0,0,0,0 for Margins on Margins & Header/Footer Tab. This
49651 makes the receipts use all available space on the paper
49656 <para>Set all Headers/Footers to -blank-. This removes all of the
49657 gunk you might normally find on a print from Firefox, such as the
49658 URL, number of pages, etc.</para>
49662 <para>Click OK</para>
49666 <para>Set the default printer settings in Firefox so you don't see a
49667 "Print" dialog:</para>
49671 <para>Go to File > Print</para>
49675 <para>Set the Printer to the receipt printer.</para>
49679 <para>Print whatever page you are on.</para>
49683 <para>Type about:config, in the address bar. Click "I'll be
49684 careful, I promise!" on the warning message.</para>
49688 <para>Type, print.always in Filter.</para>
49692 <para>Look for, print.always_print_silent.</para>
49696 <para>If the preference is there then set the value to
49703 <para>If the preference is not there (and it shouldn't be in most
49704 browsers) you have to add the preference.</para>
49708 <para>Right click the preference area and select New >
49713 <para>Type, print.always_print_silent in the dialog box and
49714 set the value to True. This sets the print settings in Firefox
49715 to always use the same settings and print without showing a
49723 <para>Setting the print.always_print_silent setting in about:config
49724 DISABLES the ability to choose a printer in Firefox.</para>
49729 <section id="starprinter">
49731 <corpauthor>RHCL</corpauthor>
49734 <firstname>Nicole C.</firstname>
49736 <surname>Engard</surname>
49739 <pubdate>2010</pubdate>
49742 <title><link linkend="starprinter">For Star SP542 Printers</link></title>
49744 <section id="installstarprinter">
49745 <title><link linkend="installstarprinter">Installing the Printer</link></title>
49747 <para>While the following comments are based on the Star SP542 receipt
49748 printer, they probably apply to all printers in the SP5xx
49751 <para>The Star SP542 receipt printer works well with Koha and <emphasis role="bold">Firefox
49752 on Windows XP SP3</emphasis>. This printer, with either the parallel or USB interface,
49753 is fairly easy to install and configure. You will need the following executable file which
49754 is available from numerous places on the Internet:</para>
49756 <para>linemode_2k-xp_20030205.exe</para>
49758 <para>This executable actually does all of the installation; you will
49759 not need to use the Microsoft Windows "Add Printer" program. We
49760 recommend that when installing, the option for the software monitor
49761 not be selected; we have experienced significant pauses and delays in
49762 printing with it. Instead, simply choose to install the receipt
49763 printer without the monitor.</para>
49765 <para>Additionally, the install program may not put the printer on the
49766 correct port, especially if using the USB interface. This is easily
49767 corrected by going to "Start -> Printers and Faxes -> Properties
49768 for the SP542 printer -> Ports", then check the appropriate
49771 <para>A reboot may be required, even if not indicated by the
49772 installation software or the operating system.</para>
49773 <para><emphasis role="bold">Windows 7</emphasis> users should refer to this page: <ulink url="http://www.starmicronics.com/supports/win7.aspx">http://www.starmicronics.com/supports/win7.aspx</ulink>.
49778 <section id="firefoxreceipt">
49780 <corpauthor>VOKAL</corpauthor>
49783 <firstname>Nicole C.</firstname>
49785 <surname>Engard</surname>
49788 <pubdate>2010</pubdate>
49790 <bibliosource><ulink url="https://docs.google.com/View?id=dcccx9zm_3htvhwzgc#Setting_up_your_SLIP_printer_1_18087191815760117">https://docs.google.com/View?id=dcccx9zm_3htvhwzgc#Setting_up_your_SLIP_printer_1_18087191815760117</ulink></bibliosource>
49793 <title><link linkend="firefoxreceipt">Configuring Firefox to Print to Receipt Printer</link></title>
49797 <para>Open File > Page Setup</para>
49801 <para>Make all the headers and footers blank</para>
49805 <para>Set the margins to 0 (zero)</para>
49809 <para>In the address bar of Firefox, type about:config</para>
49813 <para>Search for print.always_print_silent and double click
49818 <para>Change it from false to true</para>
49822 <para>This lets you skip the Print pop up box that comes up, as
49823 well as skipping the step where you have to click OK,
49824 automatically printing the right sized slip.</para>
49830 <para>If print.always_print_silent does not come up</para>
49834 <para>Right click on a blank area of the preference
49839 <para>Select new > Boolean</para>
49843 <para>Enter "print.always_print_silent" as the name (without
49848 <para>Click OK</para>
49852 <para>Select true for the value</para>
49858 <para>You may also want to check what is listed for
49859 print.print_printer</para>
49863 <para>You may have to choose Generic/Text Only (or whatever your
49864 receipt printer might be named)</para>
49871 <appendix id="noticesappendix">
49872 <title>Notice & Slips Guides</title>
49873 <section id="noticesfieldguide">
49877 <firstname>Barton</firstname>
49878 <surname>Chittenden</surname>
49880 <orgname>ByWater Solutions</orgname>
49884 <firstname>Nicole C.</firstname>
49885 <surname>Engard</surname>
49888 <pubdate>2014</pubdate>
49890 <title><link linkend="noticesfieldguide">Field Guide for Notices & Slips</link></title>
49891 <para>This guide will break down the notices and slips information in 3 ways. First it will
49892 tell you what file generates the notice, then how you will present the item info in that
49893 notice and finally if the notice can be branch specific or not.</para>
49895 <informaltable style="border-collapse:collapse;border:1px solid black;font-family:'Times New Roman';letter-spacing:normal;text-indent:0px;text-transform:none;word-spacing:0px">
49898 <th rowspan="1" colspan="1" align="left">Letter Code</th>
49899 <th rowspan="1" colspan="1" align="left">Used In</th>
49900 <th rowspan="1" colspan="1" align="left">Detail tag</th>
49901 <th rowspan="1" colspan="1" align="left">Can be branch specific</th>
49906 <td rowspan="1" colspan="1" align="left">DUE</td>
49907 <td rowspan="1" colspan="1" align="left">advance_notices.pl</td>
49908 <td rowspan="1" colspan="1" align="left"><<items.content>></td>
49909 <td rowspan="1" colspan="1" align="left">No</td>
49912 <td rowspan="1" colspan="1" align="left">DUEDGST</td>
49913 <td rowspan="1" colspan="1" align="left">advance_notices.pl</td>
49914 <td rowspan="1" colspan="1" align="left"><<items.content>></td>
49915 <td rowspan="1" colspan="1" align="left">No</td>
49918 <td rowspan="1" colspan="1" align="left">PREDUE</td>
49919 <td rowspan="1" colspan="1" align="left">advance_notices.pl</td>
49920 <td rowspan="1" colspan="1" align="left"><<items.content>></td>
49921 <td rowspan="1" colspan="1" align="left">No</td>
49924 <td rowspan="1" colspan="1" align="left">PREDUEDGST</td>
49925 <td rowspan="1" colspan="1" align="left">advance_notices.pl</td>
49926 <td rowspan="1" colspan="1" align="left"><<items.content>></td>
49927 <td rowspan="1" colspan="1" align="left">No</td>
49930 <td rowspan="1" colspan="1" align="left">ODUE*</td>
49931 <td rowspan="1" colspan="1" align="left">overdue_notices.pl</td>
49932 <td rowspan="1" colspan="1" align="left"><<items.content>> or <item>
49934 <td rowspan="1" colspan="1" align="left">Yes</td>
49937 <td rowspan="1" colspan="1" align="left">CHECKOUT</td>
49938 <td rowspan="1" colspan="1" align="left">C4/Circulation.pm</td>
49939 <td rowspan="1" colspan="1" align="left">N/A</td>
49940 <td rowspan="1" colspan="1" align="left">Yes</td>
49943 <td rowspan="1" colspan="1" align="left">RENEWAL</td>
49944 <td rowspan="1" colspan="1" align="left">C4/Circulation.pm</td>
49945 <td rowspan="1" colspan="1" align="left">N/A</td>
49946 <td rowspan="1" colspan="1" align="left">Yes</td>
49949 <td rowspan="1" colspan="1" align="left">TRANSFERSLIP</td>
49950 <td rowspan="1" colspan="1" align="left">C4/Circulation.pm</td>
49951 <td rowspan="1" colspan="1" align="left">N/A</td>
49952 <td rowspan="1" colspan="1" align="left">Yes</td>
49955 <td rowspan="1" colspan="1" align="left">ISSUESLIP</td>
49956 <td rowspan="1" colspan="1" align="left">C4/Members.pm</td>
49957 <td rowspan="1" colspan="1" align="left">
49958 <para><checkedout> </checkedout> </para>
49959 <para> <overdue> </overdue> </para>
49960 <para> <news> </news> </para>
49962 <td rowspan="1" colspan="1" align="left">Yes</td>
49965 <td rowspan="1" colspan="1" align="left">ISSUEQSLIP</td>
49966 <td rowspan="1" colspan="1" align="left">C4/Members.pm</td>
49967 <td rowspan="1" colspan="1" align="left"><checkedout> </checkedout></td>
49968 <td rowspan="1" colspan="1" align="left">Yes</td>
49971 <td rowspan="1" colspan="1" align="left">HOLDPLACED</td>
49972 <td rowspan="1" colspan="1" align="left">C4/Reserves.pm</td>
49973 <td rowspan="1" colspan="1" align="left">N/A</td>
49974 <td rowspan="1" colspan="1" align="left">Yes</td>
49977 <td rowspan="1" colspan="1" align="left">RESERVESLIP</td>
49978 <td rowspan="1" colspan="1" align="left">C4/Reserves.pm</td>
49979 <td rowspan="1" colspan="1" align="left">N/A</td>
49980 <td rowspan="1" colspan="1" align="left">Yes</td>
49983 <td rowspan="1" colspan="1" align="left">ASKED</td>
49984 <td rowspan="1" colspan="1" align="left">C4/Suggestions.pm</td>
49985 <td rowspan="1" colspan="1" align="left">N/A</td>
49986 <td rowspan="1" colspan="1" align="left">Yes</td>
49989 <td rowspan="1" colspan="1" align="left">CHECKED</td>
49990 <td rowspan="1" colspan="1" align="left">C4/Suggestions.pm</td>
49991 <td rowspan="1" colspan="1" align="left">N/A</td>
49992 <td rowspan="1" colspan="1" align="left">Yes</td>
49995 <td rowspan="1" colspan="1" align="left">ACCEPTED</td>
49996 <td rowspan="1" colspan="1" align="left">C4/Suggestions.pm</td>
49997 <td rowspan="1" colspan="1" align="left">N/A</td>
49998 <td rowspan="1" colspan="1" align="left">Yes</td>
50001 <td rowspan="1" colspan="1" align="left">REJECTED</td>
50002 <td rowspan="1" colspan="1" align="left">C4/Suggestions.pm</td>
50003 <td rowspan="1" colspan="1" align="left">N/A</td>
50004 <td rowspan="1" colspan="1" align="left">Yes</td>
50007 <td rowspan="1" colspan="1" align="left">OPAC_REG_VERIFY</td>
50008 <td rowspan="1" colspan="1" align="left">opac/opac-memberentry.pl</td>
50009 <td rowspan="1" colspan="1" align="left">N/A</td>
50010 <td rowspan="1" colspan="1" align="left">No</td>
50018 <appendix id="samplenotice">
50019 <title>Example Notice</title>
50021 <para>Nicole Engard</para>
50023 <para>410 Library Rd.</para>
50025 <para>Philadelphia, PA 19107</para>
50027 <para>Dear Nicole Engard (23529000035726),</para>
50029 <para>According to our records, at the time of this notice, you have items
50030 that are overdue. Please return or renew them as soon as possible to avoid
50031 increasing late fines.</para>
50033 <para>If you have registered a password with the library, you may use it
50034 with your library card number to renew online.</para>
50036 <para>If you believe you have returned the items below please call at and
50037 library staff will be happy to help resolve the issue.</para>
50039 <para>The following item(s) are currently overdue:</para>
50041 <para>07/08/2008 Creating drug-free schools and communities : 502326000054
50042 Fox, C. Lynn.</para>
50044 <para>06/27/2008 Eating fractions / 502326000022 McMillan, Bruce.</para>
50046 <para>Sincerely, Library Staff</para>
50049 <appendix id="sampleserialsapp">
50050 <title>Sample Serials</title>
50054 <section id="readersdigestsample">
50055 <title><link linkend="readersdigestsample">Reader's Digest (0034-0375)</link></title>
50059 <para>Published 12 times a year (monthly)</para>
50063 <para>The Volume number changes every 6 months and the numbers
50064 continues on (requires an advanced pattern).</para>
50067 <screeninfo>Sample Reader's Digest Subscription</screeninfo>
50071 <imagedata fileref="images/serialssamples/readersserial.png"/>
50081 <section id="peoplesample">
50082 <title><link linkend="peoplesample">People Weekly (1076-0091)</link></title>
50086 <para>Published weekly</para>
50090 <para>The website says "on Saturday except the first week of
50091 August, Thanksgiving week, the first and last weeks of the year"
50092 but this does not match the pattern for 2007 or 2008</para>
50098 <para>In the Jul-Dec there are 26 issues</para>
50102 <para>In the Jan-Jun there are 25 issues (no issue for the first
50103 week of January)</para>
50107 <para>Since the irregularity on the first # 26 does not skip a week,
50108 this would be set up as to roll over on issue 25. The 26th issue in the
50109 second half of the year would have to be received as a
50110 supplemental.</para>
50112 <para>The irregularity check will complain that 52 issues were expected,
50113 but 25 entered. The current irregularity check can only check that the
50114 first position of the numbering pattern matches the expected issue count
50115 of the periodicity. But we do need to trigger the rollover on the
50116 volume, so we need to define the last two weeks of the year as
50117 irregularities. So we receive 50 issues the first 50 weeks, then one
50118 supplemental issue in week 51, which we have to define the enumeration
50119 for, then the next predicted issue will be the following year's first
50123 <section id="hebrewserialsample">
50124 <title><link linkend="hebrewserialsample">Et-Mol</link></title>
50126 <para>This journal is published with the following rules:</para>
50130 <para>6 issues a year (every 2 months)</para>
50134 <para>year changes every 6 issues</para>
50138 <para>we start in 2011</para>
50142 <para>the issue number goes up indefinitely</para>
50146 <para>starting from issue 215</para>
50150 <para>The planning would look like this:</para>
50153 <screeninfo>Sample for this Hebrew Journal</screeninfo>
50157 <imagedata fileref="images/serialssamples/hebrewnewspaper.png"/>
50162 <section id="backpackerserial">
50163 <title><link linkend="backpackerserial">Backpacker (0277-867X)</link></title>
50164 <para>Published 9 times a year irregularly. The issues continues while the volume and number
50165 rolls over every 9 issues. If you're holding Volume 41, Number 3, Issue 302 in your hand
50166 the prediction would look like this:</para>
50168 <screeninfo>Backpacker numbering pattern</screeninfo>
50171 <imagedata fileref="images/serialssamples/backpacker.png"/>
50175 <para>And the received issues would number like this:</para>
50176 <para>v. 41, no. 3, iss. 302 </para>
50177 <para>v. 41, no. 4, iss. 303 </para>
50178 <para>v. 41, no. 5, iss. 304 </para>
50179 <para>v. 41, no. 6, iss. 305 </para>
50180 <para>v. 41, no. 7, iss. 306 </para>
50181 <para>v. 41, no. 8, iss. 307</para>
50182 <para>v. 41, no. 9, iss. 308 </para>
50183 <para>v. 42, no. 1, iss. 309 </para>
50184 <para>v. 42, no. 2, iss. 310 </para>
50185 <para>v. 42, no. 3, iss. 311 </para>
50186 <para>v. 42, no. 4, iss. 312</para>
50188 <section id="keatsserial">
50189 <title><link linkend="keatsserial">Keats-Shelley Journal (0453-4387)</link></title>
50190 <para>This journal is published once per year in July. The numbering follows this pattern: <itemizedlist>
50192 <para>Vol. 61 2013</para>
50195 <para>Vol. 62 2014</para>
50198 <para>Vol. 63 2015</para>
50200 </itemizedlist> Setup should look like this (if you're starting in July 2014):</para>
50202 <screeninfo>Serial planning</screeninfo>
50205 <imagedata fileref="images/serialssamples/keatsplanning.png"/>
50210 <section id="cilserial">
50211 <title><link linkend="cilserial">Computers in Libraries (1041-7915)</link></title>
50212 <para>Computers in Libraries is published ten times per year (monthly with January/February
50213 and July/August combined issues).</para>
50215 <screeninfo>Subscription details</screeninfo>
50218 <imagedata fileref="images/serialssamples/cilirregular.png"/>
50223 <screeninfo>Serial Planning</screeninfo>
50226 <imagedata fileref="images/serialssamples/cilpattern.png"/>
50231 <screeninfo>Received details</screeninfo>
50234 <imagedata fileref="images/serialssamples/cilreceived.png"/>
50240 <appendix id="samplelistemail">
50241 <title>Sample List & Cart Emails</title>
50242 <section id="examplelistemail">
50243 <title><link linkend="examplelistemail">Example Email from List</link></title>
50244 <para>Below is an example of an email from a list in
50245 Koha.<programlisting>Hi,
50247 Here is your list called If You Like Jodi Picoult, sent from our online catalog.
50249 Please note that the attached file is a MARC bibliographic records file
50250 which can be imported into a Personal Bibliographic Software like EndNote,
50251 Reference Manager or ProCite.
50252 ---------------------------------------------
50254 Home safe : a novel /
50256 by Berg, Elizabeth.
50258 Published by: Random House,, 260 p. ;, 25 cm.
50259 Copyright year: 2009
50261 In the online catalog:
50262 http://MYCATALOG/cgi-bin/koha/opac-detail.pl?biblionumber=12113
50264 North Branch FIC (FIC Ber) TVSN500088894O
50265 Main Library FIC (FIC Boh) TVSN5000921548
50266 South Branch FIC (FIC Boh) TVSN500092156A
50267 West Branch FIC (FIC Boh) TVSN5000921559
50269 ---------------------------------------------
50273 by Brown, Rosellen.
50275 Published by: Farrar, Straus, and Giroux,, 402 p. ;, 24 cm.
50276 Copyright year: 2000
50278 In the online catalog:
50279 http://MYCATALOG/cgi-bin/koha/opac-detail.pl?biblionumber=12501
50281 East Branch (813/.54)
50282 South Branch FIC (FIC Bro) TVSN5000451333</programlisting></para>
50284 <section id="examplecartemail">
50285 <title><link linkend="examplecartemail">Example Email from Cart</link></title>
50286 <para>Below is a sample of what an email from the Cart in Koha will look
50287 like:<programlisting>Hi,
50289 Joaquin D'Planque sent you a cart from our online catalog.
50291 Please note that the attached file is a MARC bibliographic records
50292 file which can be imported into personal bibliographic software like
50293 EndNote, Reference Manager or ProCite.
50295 ---------------------------------------------------------------------
50299 Author(s): Brookfield, Karen. ;
50300 Published by: Knopf : | Distributed by Random House, , 63 p. : ,
50302 Copyright year: 1993
50303 Notes : Includes index.
50307 http://MYCATALOG/cgi-bin/koha/opac-detail.pl?biblionumber=31644
50311 * East Branch (JNF 002 Bro) TVSN500017618A
50313 -----------------------------------------------------------------
50315 2. The 1965 World book year book :
50317 Published by: Field Enterprises Educational Corp., , 628 p. : , 26
50319 Copyright year: 1965
50320 Notes : Includes index. | Spine title: Year book, 1965. | Cover
50321 title: The World book year book, 1965.
50323 http://www.archive.org/details/1965worldbookyea00chic%20%7C%20http://www.openlibrary.org/books/OL24199089M
50326 http://MYCATALOG/cgi-bin/koha/opac-detail.pl?biblionumber=88666
50328 -----------------------------------------------------------------</programlisting></para>
50332 <appendix id="kohacms">
50333 <title>Using Koha as a Content Management System (CMS)</title>
50337 <section id="kohacmssetup">
50338 <title><link linkend="kohacmssetup">Setup</link></title>
50340 <para>These are instructions for taking a default install of Koha and allowing it to function
50341 as a little content management system. This will allow a library to publish an arbitrary
50342 number of pages based on a template. This example uses the template for the main opac page,
50343 but you could just as well use any template you wish with a bit more editing. This may be
50344 appropriate if you have a small library, want to allow librarians to easily add pages, and
50345 do not want to support a complete CMS. </para>
50349 <para>Copy /usr/share/koha/opac/cgi-bin/opac/opac-main.pl to
50350 /usr/share/koha/opac/cgi-bin/opac/pages.pl (in the same directory) </para>
50354 <para>Edit pages.pl in an editor</para>
50358 <para>At approximately line 33 change this code: </para>
50360 <programlisting>template_name => "opac-main.tmpl",</programlisting>
50364 <para>To this code:</para>
50366 <programlisting>template_name => "pages.tmpl", </programlisting>
50370 <para>At approximately line 62 after this code: </para>
50371 <programlisting>$template->param(
50372 koha_news => $all_koha_news,
50373 koha_news_count => $koha_news_count,
50374 display_daily_quote => C4::Context->preference('QuoteOfTheDay'),
50375 daily_quote => $quote,
50376 );</programlisting>
50379 <para>Add these lines: </para>
50380 <programlisting> my $page = "page_" . $input->param('p'); # go for "p" value in URL and do the concatenation
50381 my $preference = C4::Context->preference($page); # Go for preference
50382 $template->{VARS}->{'page_test'} = $preference; # pass variable to template pages.tt</programlisting>
50386 <para>Note pages.pl file must have Webserver user execution permissions, you can use
50387 <ulink url="http://en.wikipedia.org/wiki/Chmod">chmod</ulink> command if you are
50388 actually logged in as such user:
50389 <programlisting> $chmod 755 pages.pl</programlisting></para>
50393 <para>In the browser go to Home > Administration > System Preferences > Local Use and add
50394 a New Preference called "page_test" </para>
50398 <para>Fill it out as so</para>
50402 <para>Explanation: test page for pages tiny cms</para>
50406 <para>Variable: page_test</para>
50410 <para>Value: Lorem ipsum</para>
50414 <para>Click the TextArea link (or enter "TextArea" into the
50415 input field below it)</para>
50419 <para>variable options (last field): 80|50</para>
50425 <para>In a browser go to http://youraddress/cgi-bin/koha/pages.pl?p=test The page should
50426 come up with the words "Lorem ipsum" in the main content area of the page. (replace
50427 "youraddress" with localhost, 127.0.0.1, or your domain name depending on how you have
50428 Apache set up.) </para>
50432 <para>To add more pages simply create a system preference where the title begins with
50433 "page_" followed by any arbitrary letters. You can add any markup you want as the value
50434 of the field. Reference the new page by changing the value of the "p" parameter in the
50438 <para>To learn more visit the Koha wiki page on this topic: <ulink url="http://wiki.koha-community.org/wiki/Koha_as_a_CMS">http://wiki.koha-community.org/wiki/Koha_as_a_CMS</ulink></para>
50439 <section id="kohacmstmpl">
50440 <title><link linkend="kohacmstmpl">Editing the pages template</link></title>
50441 <para>The file to create / edit for the pages template will depend on your <link linkend="opacthemes">opacthemes</link> system preference setting </para>
50442 <section id="kohacmstmplboot">
50443 <title><link linkend="kohacmstmplboot">Editing 'bootstrap' theme template (current)</link></title>
50446 <para>Copy /usr/share/koha/opac/htdocs/opac-tmpl/bootstrap/en/modules/opac-main.tt to /usr/share/koha/opac/htdocs/opac-tmpl/bootstrap/en/modules/pages.tt</para>
50449 <para>Edit /usr/share/koha/opac/htdocs/opac-tmpl/bootstrap/en/modules/pages.tt</para>
50452 <para>At approximately line 61, change this:
50453 <programlisting> [% IF ( OpacMainUserBlock ) %]<div id="opacmainuserblock">[% OpacMainUserBlock %]</div>[% END %]</programlisting></para>
50457 <programlisting> [% IF ( page_test ) %]<div id="opacmainuserblock">[% page_test %]</div>[% END %]</programlisting></para>
50460 <para>Remark: You may wish to disable your News block of these CMS style pages e.g. when you do not want it displayed on the CMS style pages or where the News block is long enough that it actually makes the 'page_test' include scroll outside the default viewport dimensions. In that case, remove the following code from your pages.tt template.
50462 [% IF ( koha_news_count ) %]
50463 <div id="news">
50464 <table class="table table-bordered">
50465 [% FOREACH koha_new IN koha_news %]
50466 <thead><tr><th>[% koha_new.title %]</th></tr></thead>
50467 <tbody><tr><td><p>[% koha_new.new %]</p>
50468 <p class="newsfooter"><i>(published on [% koha_new.newdate %])</i></p></td></tr></tbody>
50477 <section id="kohacmstrouble">
50478 <title><link linkend="kohacmstrouble">Troubleshooting</link></title>
50480 <para>If you have problems check file permissions on pages.pl and
50481 pages.tmpl. They should have the same user and group as other Koha
50482 files like opac-main.pl.</para>
50485 <section id="kohacmsbonus">
50486 <title><link linkend="kohacmsbonus">Bonus Points</link></title>
50488 <para>Instead of using the address
50489 http://youraddress/cgi-bin/koha/pages.pl?p=test you can shorten it to
50490 http://youraddress/pages.pl?p=test Just open up
50491 /etc/koha/koha-httpd.conf and add the follow at about line
50492 13:<programlisting>ScriptAlias /pages.pl "/usr/share/koha/opac/cgi-bin/opac/pages.pl" </programlisting></para>
50494 <para>Then restart Apache.</para>
50498 <section id="kohacmsusage">
50499 <title><link linkend="kohacmsusage">Usage</link></title>
50501 <para>After setting up Koha as a CMS you can create new pages following
50502 these instructions:</para>
50504 <section id="kohacmspages">
50505 <title><link linkend="kohacmspages">Adding Pages</link></title>
50507 <para>To add a new page you need to add a system preference under
50512 <para>Get there: More > Administration > Global System
50513 Preferences > Local Use</para>
50517 <para>Click 'New Preference'</para>
50521 <para>Enter in a description in the Explanation field</para>
50525 <para>Enter a value that starts with 'page_' in the Variable
50530 <para>Enter starting HTML in the Value field</para>
50533 <screeninfo>Add a new preference</screeninfo>
50537 <imagedata fileref="images/appendix-cms/newpreference.png"/>
50544 <para>Set the Variable Type to Textarea</para>
50548 <para>Set the Variable options to something like 20|20 for 20 rows
50549 and 20 columns</para>
50552 <screeninfo>Settings for the new preference</screeninfo>
50556 <imagedata fileref="images/appendix-cms/newpref-settings.png"/>
50564 <section id="kohacmsview">
50565 <title><link linkend="kohacmsview">Viewing your page</link></title>
50567 <para>You can view your new page at
50568 http://YOUR-OPAC/cgi-bin/koha/pages.pl?p=PAGENAME where PAGENAME is
50569 the part you entered after 'page_' in the Variable field.</para>
50572 <section id="kohacmsexpage">
50573 <title><link linkend="kohacmsexpage">Example</link></title>
50575 <para>This process can be used to create recommended reading lists
50576 within Koha. So once the code changes have been made per the
50577 instructions on 'Koha as a CMS' you go through the 'Adding a New Page'
50578 instructions above to great a page for 'Recommended Reading
50582 <screeninfo>Create page by modifying a system
50583 preference</screeninfo>
50587 <imagedata fileref="images/appendix-cms/recommendedreading.png"/>
50592 <para>Next we need to create pages for our various classes (or
50593 categories). To do this, return to the 'Adding a New Page' section and
50594 create a preference for the first class.</para>
50597 <screeninfo>Add a new sys pref for another page</screeninfo>
50601 <imagedata fileref="images/appendix-cms/class101-pref.png"/>
50606 <para>Next you'll want to link your first page to your new second
50607 page, go to the page_recommend preference and click 'Edit.' Now you
50608 want to edit the HTML to include a link to your newest page:</para>
50611 <screeninfo>Edit original preference to add new page</screeninfo>
50615 <imagedata fileref="images/appendix-cms/editrecommendpref.png"/>
50621 <section id="examplecms">
50622 <title><link linkend="examplecms">Live Examples</link></title>
50626 <para>The Crawford Library at Dallas Christian College is using
50627 this method for their recommended reading lists: <ulink url="http://opac.dallas.edu/">http://opac.dallas.edu/</ulink></para>
50634 <appendix id="resetkohadb">
50635 <title>Resetting the Koha Database</title>
50637 <para>These notes on how to reset the database for Koha were derived from the following email
50638 thread: <ulink url="http://lists.koha-community.org/pipermail/koha-devel/2009-January/008939.html">http://lists.koha-community.org/pipermail/koha-devel/2009-January/008939.html</ulink> and
50639 <ulink url="http://lists.katipo.co.nz/public/koha/2014-June/039701.html">http://lists.katipo.co.nz/public/koha/2014-June/039701.html</ulink>
50642 <para>Resetting the database may be useful if you install Koha with the
50643 sample data, and then wish to use real data without reinstalling the
50646 <section id="deletetables">
50647 <title><link linkend="deletetables">Delete sample data from Tables</link></title>
50648 <para>Use your preferred MySQL client to <ulink url="http://dev.mysql.com/doc/refman/5.5/en/delete.html">delete</ulink> the following
50655 <para>biblioitems</para>
50661 <para>auth_header</para>
50664 <para>sessions</para>
50667 <para>zebraqueue</para>
50671 You may need to disable foreign key checks to delete data from same tables. For instructions follow this thread:
50672 <ulink url="https://lists.katipo.co.nz/pipermail/koha/2013-July/036853.html">https://lists.katipo.co.nz/pipermail/koha/2013-July/036853.html</ulink>.
50676 <section id="resetzebra">
50677 <title><link linkend="resetzebra">Reset the Zebra Index</link></title>
50679 <para>Run the following commands to reset the authorities and biblios
50680 Zebra indices. <programlisting>$ zebraidx -c /etc/koha/zebradb/zebra-authorities-dom.cfg -g iso2709 -d authorities init
50681 $ zebraidx -c /etc/koha/zebradb/zebra-biblios.cfg -g iso2709 -d biblios init </programlisting></para>
50682 <para>If you are running a package install then you'll want to run the following commands to
50683 reset the authorities and biblios Zebra indices
50684 instead:<programlisting>$ sudo zebraidx -c /etc/koha/sites/YOURLIBRARY/zebra-authorities-dom.cfg -g iso2709 -d authorities init
50685 $ sudo zebraidx -c /etc/koha/sites/YOURLIBRARY/zebra-biblios.cfg -g iso2709 -d biblios init </programlisting></para>
50686 <para>Replacing YOURLIBRARY with your Koha installation name.</para>
50690 <appendix id="importantlinks">
50691 <title>Important Links</title>
50695 <section id="koharelatedlinks">
50696 <title><link linkend="koharelatedlinks">Koha Related</link></title>
50700 <para>Report Koha Bugs - <ulink url="http://bugs.koha-community.org">http://bugs.koha-community.org</ulink></para>
50704 <para>Koha Versioning Control - <ulink url="http://git.koha-community.org/">http://git.koha-community.org/</ulink></para>
50708 <para>Database Structure - <ulink url="http://schema.koha-community.org">http://schema.koha-community.org</ulink></para>
50711 <para>Koha Community Statistics - <ulink url="http://hea.koha-community.org">http://hea.koha-community.org</ulink></para>
50715 <para>Koha as a CMS - <ulink url="http://wiki.koha-community.org/wiki/Koha_as_a_CMS">http://wiki.koha-community.org/wiki/Koha_as_a_CMS</ulink></para>
50719 <para>Kyles's Koha Tools - <ulink url="http://kylehall.info/index.php/projects/koha/">http://kylehall.info/index.php/projects/koha/</ulink></para>
50723 <para>Koha Bibliography - <ulink url="http://www.zotero.org/groups/koha">http://www.zotero.org/groups/koha</ulink></para>
50727 <para>Koha Shared Links - <ulink url="http://groups.diigo.com/group/everything-koha">http://groups.diigo.com/group/everything-koha</ulink></para>
50731 <section id="circrelatedlinks">
50732 <title><link linkend="circrelatedlinks">Circulation Related</link></title>
50735 <para>Koha Desktop Offline Circulation: <ulink url="https://github.com/bywatersolutions/koha-offline-circulation/releases">https://github.com/bywatersolutions/koha-offline-circulation/releases</ulink></para>
50738 <para>Koha Firefox Offline Circulation: <ulink url="https://addons.mozilla.org/en-US/firefox/addon/koct/">https://addons.mozilla.org/en-US/firefox/addon/koct/</ulink>
50744 <section id="catalogrelatedlinks">
50745 <title><link linkend="catalogrelatedlinks">Cataloging Related</link></title>
50749 <para>Koha MARC Tutorials - <ulink url="http://www.pakban.net/brooke/">http://www.pakban.net/brooke/</ulink></para>
50753 <para>IRSpy Open Z39.50 Server Search - <ulink url="http://irspy.indexdata.com/">http://irspy.indexdata.com/</ulink></para>
50757 <para>Z39.50 Server List - <ulink url="http://staff.library.mun.ca/staff/toolbox/z3950hosts.htm">http://staff.library.mun.ca/staff/toolbox/z3950hosts.htm</ulink></para>
50760 <para>Open Koha Z39.50 Targets - <ulink url="http://wiki.koha-community.org/wiki/Koha_Open_Z39.50_Sources">http://wiki.koha-community.org/wiki/Koha_Open_Z39.50_Sources</ulink></para>
50764 <para>Library of Congress Authorities - <ulink url="http://authorities.loc.gov/">http://authorities.loc.gov/</ulink></para>
50768 <para>MARC Country Codes - <ulink url="http://www.loc.gov/marc/countries/">http://www.loc.gov/marc/countries/</ulink></para>
50772 <para>Search the MARC Code List for Organizations - <ulink url="http://www.loc.gov/marc/organizations/org-search.php">http://www.loc.gov/marc/organizations/org-search.php</ulink></para>
50776 <para>Search for Canadian MARC Codes - <ulink url="http://www.collectionscanada.gc.ca/illcandir-bin/illsear/l=0/c=1">http://www.collectionscanada.gc.ca/illcandir-bin/illsear/l=0/c=1</ulink></para>
50780 <para>Z39.50 Bib-1 Attribute - <ulink url="http://www.loc.gov/z3950/agency/defns/bib1.html">http://www.loc.gov/z3950/agency/defns/bib1.html</ulink></para>
50785 <section id="enhancedcontentlinks">
50786 <title><link linkend="enhancedcontentlinks">Enhanced Content Related</link></title>
50790 <para>Amazon Associates - <ulink url="https://affiliate-program.amazon.com/">https://affiliate-program.amazon.com</ulink></para>
50794 <para>Amazon Web Services - <ulink url="http://aws.amazon.com">http://aws.amazon.com</ulink></para>
50798 <para>WorldCat Affiliate Tools - <ulink url="http://www.worldcat.org/wcpa/do/AffiliateUserServices?method=initSelfRegister">http://www.worldcat.org/wcpa/do/AffiliateUserServices?method=initSelfRegister</ulink></para>
50802 <para>XISBN - <ulink url="http://www.worldcat.org/affiliate/webservices/xisbn/app.jsp">http://www.worldcat.org/affiliate/webservices/xisbn/app.jsp</ulink></para>
50806 <para>LibraryThing for Libraries - <ulink url="http://www.librarything.com/forlibraries">http://www.librarything.com/forlibraries</ulink></para>
50811 <section id="opaclinks">
50812 <title><link linkend="opaclinks">Design Related</link></title>
50816 <para>JQuery Library - <ulink url="http://wiki.koha-community.org/wiki/JQuery_Library">http://wiki.koha-community.org/wiki/JQuery_Library</ulink></para>
50819 <para>HTML & CSS Library - <ulink url="http://wiki.koha-community.org/wiki/HTML_%26_CSS_Library">http://wiki.koha-community.org/wiki/HTML_%26_CSS_Library</ulink></para>
50823 <para>Owen Leonard's Koha Blog - <ulink url="http://www.myacpl.org/koha">http://www.myacpl.org/koha</ulink></para>
50828 <section id="reportlinks">
50829 <title><link linkend="reportlinks">Reports Related</link></title>
50833 <para>SQL Reports Library - <ulink url="http://wiki.koha-community.org/wiki/SQL_Reports_Library">http://wiki.koha-community.org/wiki/SQL_Reports_Library</ulink></para>
50837 <para>Database Schema - <ulink url="http://schema.koha-community.org">http://schema.koha-community.org</ulink></para>
50841 <para>Sample reports from NEKLS - <ulink url="http://www.nexpresslibrary.org/training/reports-training/">http://www.nexpresslibrary.org/training/reports-training/</ulink></para>
50846 <section id="installlinks">
50847 <title><link linkend="installlinks">Installation Guides</link></title>
50851 <para>Installing Koha 3 on Ubuntu - <ulink url="http://www.blazingmoon.org/guides/k3-on-u810-1.html">http://www.blazingmoon.org/guides/k3-on-u810-1.html</ulink></para>
50855 <para>Koha on Debian installation documentation - <ulink url="http://openlib.org/home/krichel/courses/lis508/doc/koha_installation_overview.html">http://openlib.org/home/krichel/courses/lis508/doc/koha_installation_overview.html</ulink></para>
50859 <para>Koha 3.2 on Debian Squeeze - <ulink url="http://wiki.koha-community.org/wiki/Koha_3.2_on_Debian_Squeeze">http://wiki.koha-community.org/wiki/Koha_3.2_on_Debian_Squeeze</ulink></para>
50864 <section id="misclinks">
50865 <title><link linkend="misclinks">Misc</link></title>
50869 <para>Zotero - <ulink url="http://zotero.org">http://zotero.org</ulink></para>
50873 <para>SOPAC - <ulink url="http://thesocialopac.net/">http://thesocialopac.net</ulink></para>
50879 <appendix id="XSLTiTypes">
50880 <title>Koha XSLT Item Types</title>
50882 <para>When you have any of the XSLT system preferences (<link linkend="OPACXSLTDetailsDisplay">OPACXSLTDetailsDisplay</link>, <link linkend="OPACXSLTResultsDisplay">OPACXSLTResultsDisplay</link>, <link linkend="XSLTDetailsDisplay">XSLTDetailsDisplay</link>, and/or <link linkend="XSLTResultsDisplay">XSLTResultsDisplay</link>) along with the <link linkend="DisplayOPACiconsXSLT">DisplayOPACiconsXSLT</link> and <link linkend="DisplayIconsXSLT">DisplayIconsXSLT</link>
50883 preferences turned on you will see item type icons on the related screen. <important>
50884 <para>These images are coming from values found in your leader, if your leader is not
50885 cataloged properly it might be best to turn off the <link linkend="DisplayOPACiconsXSLT">DisplayOPACiconsXSLT</link> preference (which can be done while leaving the other XSLT
50886 preferences turned on).</para>
50887 </important></para>
50890 <screeninfo>Book image</screeninfo>
50894 <imagedata fileref="images/appendix-xslt/book.png"/>
50901 <para>Book [BK]</para>
50905 <para>leader6 = a (and one of the leader7 values below)</para>
50909 <para>leader7 = a</para>
50913 <para>leader7 = c</para>
50917 <para>leader7 = d</para>
50921 <para>leader7 = m</para>
50927 <para>leader6 = t</para>
50934 <screeninfo>Computer Image</screeninfo>
50938 <imagedata fileref="images/appendix-xslt/comp.png"/>
50945 <para>Computer File [CF]</para>
50949 <para>leader6 = m</para>
50956 <screeninfo>Continuing Resource Image</screeninfo>
50960 <imagedata fileref="images/appendix-xslt/cr.png"/>
50967 <para>Continuing Resource [CR]</para>
50971 <para>leader7 = b</para>
50975 <para>leader7 = i</para>
50979 <para>leader7 = s</para>
50986 <screeninfo>Map Image</screeninfo>
50990 <imagedata fileref="images/appendix-xslt/map.png"/>
50997 <para>Map [MP]</para>
51001 <para>leader6 = e</para>
51005 <para>leader6 = f</para>
51012 <screeninfo>Mixed Materials Image</screeninfo>
51016 <imagedata fileref="images/appendix-xslt/mixed.png"/>
51023 <para>Mixed [MX]</para>
51027 <para>leader6 = p</para>
51034 <screeninfo>Sound Image</screeninfo>
51038 <imagedata fileref="images/appendix-xslt/sound.png"/>
51045 <para>Sound [MU]</para>
51049 <para>leader6 = c</para>
51053 <para>leader6 = d</para>
51057 <para>leader6 = i</para>
51061 <para>leader6 = j</para>
51068 <screeninfo>Visual Material Image</screeninfo>
51072 <imagedata fileref="images/appendix-xslt/visual.png"/>
51079 <para>Visual Material [VM]</para>
51083 <para>leader6 = g</para>
51087 <para>leader6 = k</para>
51091 <para>leader6 = r</para>
51098 <screeninfo>Kit Image</screeninfo>
51102 <imagedata fileref="images/appendix-xslt/kit.png"/>
51113 <para>leader6 = o</para>
51120 <appendix id="marcedit">
51121 <title>MarcEdit</title>
51123 <para>Many libraries like to use MarcEdit for modifications or data cleanup. If you'd like to do
51124 this you will need to download it at: <ulink url="http://marcedit.reeset.net/">http://marcedit.reeset.net/</ulink><important>
51125 <para>Many of the actions described in this chapter can be done in Koha using <link linkend="marcmodtemplates">Marc Modification Templates</link>, but this section is here
51126 for those who are used to MarcEdit.</para>
51127 </important></para>
51129 <section id="marceditprefix">
51130 <title><link linkend="marceditprefix">Adding a prefix to call numbers</link></title>
51132 <para>When bringing data into Koha, you may want to first clean it up.
51133 One common action among Koha users is to add a prefix to the call
51138 <para>Open MarcEdit</para>
51141 <screeninfo>MarcEdit</screeninfo>
51145 <imagedata fileref="images/appendix-marcedit/marcedit.png"/>
51152 <para>Click 'MarcEditor'</para>
51156 <para>Go to Tools > Edit Subfield Data</para>
51159 <screeninfo>Edit subfield data</screeninfo>
51163 <imagedata fileref="images/appendix-marcedit/marcedit-editsubfield.png"/>
51170 <para>To prepend data the special character is: ^b To simply
51171 prepend data to the beginning of a subfield, add ^b to the Field
51172 Data: textbox and the data to be appended in the Replace</para>
51175 <screeninfo>Prepend data to a field</screeninfo>
51179 <imagedata fileref="images/appendix-marcedit/editsubfield.png"/>
51186 <para>To prepend data to the beginning of the subfield while
51187 replacing a text string, add ^b[string to replace] to the Field
51188 Data textbox and the data to be appended in the Replace With
51196 <section id="marceditexcel">
51200 <firstname>Kanika</firstname>
51201 <surname>Goyal</surname>
51203 <orgname>Delhi Technological University</orgname>
51208 <firstname>Nicole C.</firstname>
51209 <surname>Engard</surname>
51210 <contrib>Edits where necessary.</contrib>
51214 <pubdate>2010</pubdate>
51216 <bibliosource><ulink url="http://www.botskool.com/geeks/how-import-excel-data-koha">http://www.botskool.com/geeks/how-import-excel-data-koha</ulink></bibliosource>
51218 <title><link linkend="marceditexcel">Importing Excel data into Koha</link></title>
51220 <para>Suppose you have records of your library in excel data sheet
51221 format and want them to import into Koha. But how will you do this? Koha
51222 will not let you import excel records directly. Well here is a very
51223 simple solution for you which will let you import your excel records in
51224 Koha easily. First, we will convert excel file into Marc file and then
51225 will import it into Koha.</para>
51227 <para>Follow the given steps to import your excel records into
51230 <section id="convertexcel">
51231 <title><link linkend="convertexcel">Converting from Excel format into .mrk format</link></title>
51233 <para>First, we will convert excel format into .mrk format. For this we will use MarcEdit.
51234 You can download it from <ulink url="http://marcedit.reeset.net/">http://marcedit.reeset.net/</ulink></para>
51236 <para>Now open it and select Add-ins-->Delimited Text
51240 <screeninfo>Delimited Text Translator</screeninfo>
51244 <imagedata fileref="images/appendix-marcedit/excelimport/step-1.png"/>
51249 <para>Click Next when the following window appears.</para>
51252 <screeninfo>Delimited Text Translator</screeninfo>
51256 <imagedata fileref="images/appendix-marcedit/excelimport/step-2.png"/>
51261 <para>Browse for your excel file.</para>
51264 <screeninfo>Delimited Text Translator</screeninfo>
51268 <imagedata fileref="images/appendix-marcedit/excelimport/step-3.png"/>
51273 <para>Locate your excel file by choosing the format Excel
51274 File(*.xls).</para>
51277 <screeninfo>Delimited Text Translator</screeninfo>
51281 <imagedata fileref="images/appendix-marcedit/excelimport/step-4.png"/>
51286 <para>Similarly, fill all the other entries such as Output File, Excel
51287 Sheet Name and check UTF-8 Encoded (if required) and Click
51291 <screeninfo>Delimited Text Translator</screeninfo>
51295 <imagedata fileref="images/appendix-marcedit/excelimport/step-5.png"/>
51300 <para>Now you will be prompted for mapping the fields to recognise the
51301 fields by standard marc format.</para>
51303 <para>Suppose for Field 0 that is first column I entered Map to:
51304 022$a( Valid ISSN for the continuing resource) and then click on
51308 <screeninfo>Delimited Text Translator</screeninfo>
51312 <imagedata fileref="images/appendix-marcedit/excelimport/step-6.png"/>
51318 <para>You can customize Indicators and all other things, for more
51319 information on marc21 format visit the <ulink url="http://www.loc.gov/marc/bibliographic/">official library of
51320 congress site</ulink>.</para>
51323 <para>Similarly map all other fields and then Click on Finish.</para>
51326 <screeninfo>Delimited Text Translator</screeninfo>
51330 <imagedata fileref="images/appendix-marcedit/excelimport/step-7.png"/>
51335 <para>And then a window will appear indicating that your Marc Text
51336 File(*.mrk) has been created.</para>
51339 <screeninfo>Delimited Text Translator</screeninfo>
51343 <imagedata fileref="images/appendix-marcedit/excelimport/step-8.png"/>
51348 <para>Click Close and we have created a .mrk file from .xls file in
51349 this step. You can view the file by double clicking on it.</para>
51352 <section id="convertmrk">
51353 <title><link linkend="convertmrk">Convert .mrk file to .mrc</link></title>
51355 <para>We will convert .mrk file that we have created in the above step
51356 into raw Marc format that can be directly imported into Koha.</para>
51358 <para>For this again open MarcEdit and Select MARC Tools.</para>
51361 <screeninfo>MARC Tools</screeninfo>
51365 <imagedata fileref="images/appendix-marcedit/excelimport/step-9.png"/>
51370 <para>Next Select MarcMaker to convert .mrk file into .mrc
51374 <screeninfo>MarcMaker</screeninfo>
51378 <imagedata fileref="images/appendix-marcedit/excelimport/step-10.png"/>
51383 <para>Locate your input file and name your output file. Then Click
51387 <screeninfo>MarcMaker</screeninfo>
51391 <imagedata fileref="images/appendix-marcedit/excelimport/step-11.png"/>
51396 <para>And it will show you the Result.</para>
51399 <screeninfo>MarcMaker</screeninfo>
51403 <imagedata fileref="images/appendix-marcedit/excelimport/step-12.png"/>
51408 <para>Click Close and now we have raw Marc records with us (.mrc
51412 <section id="importmrc">
51413 <title><link linkend="importmrc">Import .mrc into Koha</link></title>
51415 <para>More information on importing records into Koha can be found in
51416 the '<link linkend="stagemarc">Stage MARC Records for Import</link>'
51417 section of this manual.</para>
51419 <para>Finally we will import above created .mrc file into Koha.</para>
51421 <para>Click on Tools in your Koha staff client.</para>
51424 <screeninfo>Koha Staff Client</screeninfo>
51428 <imagedata fileref="images/appendix-marcedit/excelimport/step-13.png"/>
51433 <para>Next Click on Stage MARC Records for Import.</para>
51436 <screeninfo>Stage MARC Records for Import</screeninfo>
51440 <imagedata fileref="images/appendix-marcedit/excelimport/step-14.png"/>
51445 <para>After this, choose your previously created .mrc file and click
51449 <screeninfo>Stage File</screeninfo>
51453 <imagedata fileref="images/appendix-marcedit/excelimport/step-15.png"/>
51458 <para>You can also add comment about file and finally click on Stage
51462 <screeninfo>Stage for Import</screeninfo>
51466 <imagedata fileref="images/appendix-marcedit/excelimport/step-17.png"/>
51471 <para>When the import is done, you will get a result something like
51475 <screeninfo>Staged Records Summary</screeninfo>
51479 <imagedata fileref="images/appendix-marcedit/excelimport/step-18.png"/>
51484 <para>Next, click on Manage staged records.</para>
51486 <para>Here you can even change matching rules.</para>
51489 <screeninfo>Manage Staged Records</screeninfo>
51493 <imagedata fileref="images/appendix-marcedit/excelimport/step-19.png"/>
51498 <para>Click on Import this batch into catalog when you are
51501 <para>Thats it. After all the records get imported, check Status and
51502 it should read "imported"</para>
51505 <screeninfo>Finalize Import</screeninfo>
51509 <imagedata fileref="images/appendix-marcedit/excelimport/step-20.png"/>
51514 <para>You can even undo the Import operation.</para>
51516 <para>And within few minutes, we have imported around 10,000 records
51522 <appendix id="talkingtechappendix">
51523 <title>Talking Tech</title>
51525 <para>Talking Tech I-tiva is a third party, proprietary, product that
51526 libraries can subscribe to. Learn more here: <ulink url="http://www.talkingtech.com/solutions/library">http://www.talkingtech.com/solutions/library</ulink>.</para>
51528 <section id="talkingtechinstall">
51529 <title><link linkend="talkingtechinstall">Installation and Setup Instructions</link></title>
51531 <para>Be sure you've run
51532 installer/data/mysql/atomicupdate/Bug-4246-Talking-Tech-itiva-phone-notifications.pl
51533 to install the required data pack (new syspref, notice placeholders and
51534 messaging transport preferences)</para>
51536 <para>To use, <link linkend="TalkingTechItivaPhoneNotification">TalkingTechItivaPhoneNotification</link>
51537 syspref must be turned on.</para>
51539 <para>If you wish to process PREOVERDUE or RESERVES messages, you'll
51540 need the <link linkend="EnhancedMessagingPreferences">EnhancedMessagingPreferences</link>
51541 system preference turned on, and patrons to have filled in a preference
51542 for receiving these notices by phone.</para>
51544 <para>For OVERDUE messages, overdue notice triggers must be configured
51545 under Koha -> Tools -> <link linkend="noticetriggers">Overdue
51546 Notice Triggers</link>. Either branch-specific triggers or the default
51547 level triggers may be used (script will select whichever is
51548 appropriate).</para>
51551 <section id="talkingtechsend">
51552 <title><link linkend="talkingtechsend">Sending Notices File</link></title>
51556 <para>Add the <link linkend="talkingtechsendcron">TalkingTech_itiva_outbound.pl</link>
51557 script to your crontab</para>
51561 <para>Add an FTP/SFTP or other transport method to send the output
51562 file to the I-tiva server</para>
51566 <para>If you wish, archive the sent notices file in another
51567 directory after sending</para>
51571 <para>Run TalkingTech_itiva_outbound.pl --help for more
51575 <section id="talkingtechreceive">
51576 <title><link linkend="talkingtechreceive">Receiving Results File</link></title>
51580 <para>Add an FTP/SFTP or other transport method to send the Results
51581 file to a known directory on your Koha server</para>
51585 <para>Add the <link linkend="talkingtechreceivecron">TalkingTech_itiva_inbound.pl</link>
51586 script to your crontab, aimed at that directory</para>
51590 <para>If you wish, archive the results file in another directory
51591 after processing</para>
51595 <para>Run TalkingTech_itiva_inbound.pl --help for more
51599 <appendix id="oclcappendix">
51600 <title>OCLC Connexion Gateway</title>
51601 <para>Koha can be set to work with the OCLC Connextion Gateway. This allows libraries to use
51602 OCLC Connexion as their cataloging tool and simply send those records to Koha with a single
51603 click. The following instructions will help you set up the OCLC Connexion Gateway, if you
51604 have a system administrator you will want to consult with them on this process.</para>
51605 <section id="oclckohasetup">
51609 <firstname>D. Ruth</firstname>
51610 <surname>Bavousett</surname>
51612 <orgname>ByWater Solutions</orgname>
51617 <firstname>Nicole C.</firstname>
51618 <surname>Engard</surname>
51622 <pubdate>2012</pubdate>
51624 <title><link linkend="oclckohasetup">Setting up OCLC service on Koha</link></title>
51625 <para>First, you'll need to create a file somewhere on your system with configuration
51626 information. You could put this anywhere that is visible to the account that will be
51627 running the service. </para>
51628 <para>The file contains 11 lines. The first 6 will be about your Koha
51629 system:<programlisting>host: The IP address of your Koha server
51630 port: The port you want to use for the Connexion service. This port must be different from your SIP port, or any other service
51631 koha: The full URL of your staff client
51632 log: The location (full file specification) of your log for the service
51633 user: The default Koha username to use for importing
51634 password: The password that goes with that username</programlisting></para>
51635 <para>The remaining lines describe how to do the staging:
51636 <programlisting>match: The name of the matching rule from your system to use
51637 overlay_action: "replace", "create_new", or "ignore"-- what to do if there is a match
51638 nomatch_action: "create_new" or "ignore"-- what to do if there is no match
51639 item_action: "always_add","add_only_for_matches","add_only_for_new", or "ignore" -- what to do with embedded 952 item data
51640 import_mode: "direct" or "stage"</programlisting></para>
51641 <para> A sample file would look like
51642 this:<programlisting>host: 1.2.3.4
51644 log: /home/koha/koha-dev/var/log/connexion.log
51645 koha: http://kohastaff.myuniversity.edu
51646 user: koha_generic_staff
51649 overlay_action: replace
51650 nomatch_action: create_new
51651 item_action: ignore
51652 import_mode: direct</programlisting></para>
51653 <para>When choosing an 'import_mode' if you use "direct" then the staged record will be
51654 immediately imported into Koha, and should be searchable after your indexes catch up. If
51655 you choose "stage", then the record will be placed in a staged batch for you to later go the
51656 <link linkend="managestaged">Manage Staged MARC Records</link> tool to finish the import. </para>
51657 <para>If you import multiple records, they'll be in the same batch, until that batch is
51658 imported, then a new batch will be created. </para>
51659 <para>In "direct" mode, each record will be in its' own batch. </para>
51660 <para>To start the service, run the script:
51661 <programlisting>/location/of/connexion/import/daemon/connexion_import_daemon.pl -d -c /location/of/config/file.cnf</programlisting></para>
51663 <section id="oclcdesktopsetup">
51667 <firstname>D. Ruth</firstname>
51668 <surname>Bavousett</surname>
51670 <orgname>ByWater Solutions</orgname>
51675 <firstname>Heather</firstname>
51676 <surname>Hernandez</surname>
51678 <orgname>San Francisco Maritime National Historical Park</orgname>
51683 <firstname>Nicole C.</firstname>
51684 <surname>Engard</surname>
51688 <pubdate>2012/2014</pubdate>
51690 <title><link linkend="oclcdesktopsetup">Setting up your OCLC desktop client</link></title>
51692 <para>Screenshots are OCLC Connexion Client v.2.50, Koha v.3.12</para>
51694 <para>To set up the OCLC Connexion desktop client to connect to Koha, go to Tools > Options,
51695 then choose the Export tab. <screenshot>
51696 <screeninfo>Connexion Export Tab</screeninfo>
51699 <imagedata fileref="images/appendix-oclc/oclcexporttab.png"/>
51702 </screenshot><itemizedlist>
51704 <para>Click the "Create..." button to set up a new destination, then choose "OCLC
51705 Gateway Export" and click OK.</para>
51708 <para>Enter the following information:</para>
51712 <para>"Host Name:" Your catalog’s appropriate IP address (from your <link linkend="oclckohasetup">config file above</link>) </para>
51715 <para>"Port:" Your catalog's appropriate port number (from your <link linkend="oclckohasetup">config file above</link>) </para>
51718 <para>"Login ID:" The cataloger's Koha login </para>
51721 <para>"Password:" The cataloger's Koha password </para>
51724 <para>"Notify Host Before Disconnect" = checked, </para>
51727 <para>"Timeout" = 100, "Retries" = 3, "Delay" = 0 (zero), </para>
51730 <para>"Send Local System Logon ID Password" = checked. </para>
51736 <screeninfo>OCLC Gateway Export Settings</screeninfo>
51739 <imagedata fileref="images/appendix-oclc/oclcgatewaysetup.png"/>
51745 <para>Select "OK" when finished, and you should see your new "Gateway Export" option
51746 listed (The catalog's IP address and port are blacked out in the following
51750 <screeninfo>Gateway Export Added</screeninfo>
51753 <imagedata fileref="images/appendix-oclc/oclcgatewayexport.png"/>
51760 <para>Click on "Record Characteristics" and make sure that the bibliographic records are
51761 using MARC21, UTF-8 Unicode, and click OK to save. </para>
51764 <screeninfo>Record Characteristics</screeninfo>
51767 <imagedata fileref="images/appendix-oclc/oclcrecordchar.png"/>
51773 </itemizedlist></para>
51774 <para>You should be ready to go! To export a record from OCLC Connexion Client to Koha, just
51775 press F5 while the record is on-screen. The export dialog will pop up, and you'll see
51776 Connexion attempting to talk to Koha. You should get a message that the record was added or
51777 overlaid, including its biblio number, and a URL that you can copy into your web browser to
51778 jump straight to the record. </para>
51780 <section id="oclcgateway">
51784 <firstname>Heather</firstname>
51785 <surname>Hernandez</surname>
51787 <orgname>San Francisco Maritime National Historical Park</orgname>
51791 <firstname>Nicole C.</firstname>
51792 <surname>Engard</surname>
51795 <pubdate>2014</pubdate>
51797 <title><link linkend="oclcgateway">Using the OCLC Connexion Gateway</link></title>
51798 <para>Records can be exported from Connexion either in a batch or one by one. </para>
51799 <section id="oclconeexport">
51800 <title><link linkend="oclconeexport">Exporting records one by one</link></title>
51801 <para>To export bibliographic records one by one, be sure your "Batch" options are correct:
51802 from the "Tools" menu, select "Options", and select the "Batch" tab. In the "Perform local
51803 actions in batch" area, "Bibliographic Record Export" should be unchecked<screenshot>
51804 <screeninfo>Connexion batch options</screeninfo>
51807 <imagedata fileref="images/appendix-oclc/oclcoptions.png"/>
51810 </screenshot></para>
51811 <para>When ready to export, from the "Action" menu, select "Export" or use the F5 key. You
51812 will see a screen similar to the following if the import is successful and if the record
51813 is new to the Catalog; you may copy & paste the resulting URL into your Koha catalog
51814 to see the new record.<screenshot>
51815 <screeninfo>Connexion Export</screeninfo>
51818 <imagedata fileref="images/appendix-oclc/oclcstatus.png"/>
51821 </screenshot></para>
51822 <para>If the record was overlaid, you will see a message to that effect in the "OCLC Gateway
51823 Export Status" window<screenshot>
51824 <screeninfo>Overlay confirmation</screeninfo>
51827 <imagedata fileref="images/appendix-oclc/oclcoverlay.png"/>
51830 </screenshot></para>
51832 <section id="oclcbatchexport">
51833 <title><link linkend="oclcbatchexport">Exporting records in a batch</link></title>
51834 <para>To export bibliographic records in a batch, be sure your "Batch" options are correct:
51835 from the "Tools" menu, select "Options", and select the "Batch" tab. In the "Perform local
51836 actions in batch" area, "Bibliographic Record Export" should be checked<screenshot>
51837 <screeninfo>OCLC Batch Export Options</screeninfo>
51840 <imagedata fileref="images/appendix-oclc/oclcexportbatch.png"/>
51843 </screenshot></para>
51844 <para>When a record is ready to export, from the "Action" menu, select "Export" or use the
51845 F5 key, and it’s export status will be "ready." </para>
51846 <para>When ready to export the batch, from the "Batch" menu, select "Process batch" and
51847 check the appropriate "Path" and "Export" boxes<screenshot>
51848 <screeninfo>Batch import process</screeninfo>
51851 <imagedata fileref="images/appendix-oclc/oclcprocessbatch.png"/>
51854 </screenshot></para>
51855 <para>The export will begin, and the bib records will be exported & imported into Koha
51856 one by one; you will see "OCLC Gateway Export Status" windows, as above, showing you the
51857 results of each export. That window will stay there until you select "Close," and then the
51858 next record’s export/import will begin. The process will continue until all records in the
51859 batch are completed. Then you may or may not see the Connexion Client export report
51860 (depending on your Client options for that). </para>
51862 <section id="oclcitems">
51863 <title><link linkend="oclcitems">Items in OCLC</link></title>
51864 <para>If you'd like to create your item records in OCLC you can do so by addding a 952 for
51865 each item to the bib record you're cataloging. The <link linkend="itemcatguide">Item/Holdings Cataloging Guide</link> will break down what subfields you can use in the
51866 952, but at the minimum you want to have subfield 2, a, b, and y on your items.</para>
51868 <title>Item record example</title>
51869 <para>952 \\$2CLASSIFICATION$aHOMEBRANCHCODE$bHOLDINGBRANCHCODE$yITEMTYPECODE</para>
51874 <para>The subfield 2 holds the classification code. This can be ddc for Dewey or lcc
51875 for Library of Congress or z for Custom. Other classification sources can be found
51876 in the <link linkend="classificationsources">Classification Sources</link> area in
51877 administration</para>
51880 <para>Subfield a is your home library and needs to be the code for your home library,
51881 not the library name. You can find these codes in the <link linkend="libsgroups">Libraries & Groups</link> administration area.</para>
51884 <para>Subfield b is your holding library and needs to be the code for your holding
51885 library, not the library name. You can find these codes in the <link linkend="libsgroups">Libraries & Groups</link> administration area.</para>
51888 <para>Subfield y is your item type code. It needs to be the code, not the item type
51889 name. You can find these codes in the <link linkend="itemtypeadmin">Item
51890 Types</link> administration area.</para>
51895 <title>Item record example</title>
51896 <para>952 \\$2ddc$aMAIN$bMAIN$yBOOK</para>
51898 <para>In addition to these required fields you can enter any other subfield you'd like. Most
51899 libraries will enter a call number in subfield o and a barcode in subfield p as well.
51900 Review the <link linkend="itemcatguide">Item/Holdings Cataloging Guide</link> for a full
51901 list of subfields and values.</para>
51906 <appendix id="faqs">
51907 <title>FAQs</title>
51911 <section id="displayfaq">
51912 <title><link linkend="displayfaq">Display</link></title>
51916 <section id="customicons">
51917 <title><link linkend="customicons">Custom Item Type/Authorized Value Icons</link></title>
51919 <para><emphasis role="bold">Question:</emphasis> Can I have my own set
51920 of item type images (or authorized value icons)?</para>
51922 <para><emphasis role="bold">Answer: </emphasis>Absolutely. To add
51923 additional icons to your system you simply add a new directory to
51924 koha-tmpl/intranet-tmpl/prog/img/itemtypeimg/ and to
51925 koha-tmpl/opac-tmpl/prog/itemtypeimg and put your icons in the new
51926 directory. Your icons will show up in a new tab as soon as they are in
51927 the folders.</para>
51932 <para>Remember to put the icons in both places (on the OPAC and
51933 the intranet).</para>
51939 <section id="customkohaimages">
51940 <title><link linkend="customkohaimages">Customizing Koha Images</link></title>
51942 <para><emphasis role="bold">Question</emphasis>: Can I customize the
51943 images in the OPAC?</para>
51945 <para><emphasis role="bold">Answer</emphasis>: Absolutely. Koha comes
51946 with a series of original images that you can alter to meet your
51947 needs. The originals can be found in the misc/interface_customization/
51951 <section id="opacdisplayfaq">
51952 <title><link linkend="opacdisplayfaq">OPAC Display Fields</link></title>
51954 <para><emphasis role="bold">Question</emphasis>: What MARC fields
51955 print to the different OPAC screens in Koha?</para>
51957 <para><emphasis role="bold">Answer</emphasis>: The XSLT preference
51958 must be set as follows for the following fields to show</para>
51962 <para><link linkend="OPACXSLTResultsDisplay">OPACXSLTResultsDisplay</link> =
51963 using XSLT stylesheets</para>
51967 <para><link linkend="OPACXSLTDetailsDisplay">OPACXSLTDetailsDisplay</link> =
51968 using XSLT stylesheets</para>
51972 <para><link linkend="DisplayOPACiconsXSLT">DisplayOPACiconsXSLT</link> =
51977 <para>The OPAC Results page shows:</para>
51985 <para>100, 110, 111</para>
51989 <para>700, 710, 711</para>
52009 <para>The OPAC Details page shows:</para>
52017 <para>100, 110, 111</para>
52021 <para>700, 710, 711</para>
52025 <para>440, 490</para>
52053 <para>130, 240</para>
52093 <para>plus all of the 5xx fields in the Notes tab at the
52099 <section id="displaysubtitle">
52100 <title><link linkend="displaysubtitle">Subtitle Display on Bib Records</link></title>
52102 <para><emphasis role="bold">Question</emphasis>: How do I get the
52103 subtitle to display on the detail pages for my bib records?</para>
52105 <para><emphasis role="bold">Answer</emphasis>: Subtitle display now
52106 depends on there being a <link linkend="keywordmapping">keyword
52107 mapping</link> for the MARC field in question. Adding a mapping for
52108 "subtitle" -> "245b" for an item's framework results in display of
52109 the subtitle in OPAC and staff client search and detail pages
52110 (although not in all instances where subtitles might be displayed,
52111 e.g. the Cart).</para>
52114 <section id="opacbarcodesfaq">
52115 <title><link linkend="opacbarcodesfaq">Show patrons the barcodes of items they have checked
52118 <para><emphasis role="bold">Question</emphasis>: Can patrons see the
52119 barcodes for the items they have checked out.</para>
52121 <para><emphasis role="bold">Answer</emphasis>: Not by default, but
52122 with a few edits to the patron record you can make a barcode column
52123 appear on the patron's check out summary in the OPAC. You can set up a
52124 <link linkend="patronattributetypes">patron attribute</link> with the
52125 value of SHOW_BCODE and <link linkend="authorizedvalues">authorized
52126 value</link> of YES_NO to make this happen.</para>
52129 <screeninfo>Add SHOW_BCODE patron attribute</screeninfo>
52133 <imagedata fileref="images/opac/SHOW_BCODEadd.png"/>
52138 <para>Then on the <link linkend="editpatrons">patron's record set the
52139 value</link> for SHOW_BCODE to yes.</para>
52142 <screeninfo>Setting value for SHOW_BCODE on patron
52143 record</screeninfo>
52147 <imagedata fileref="images/opac/SHOW_BCODEattribute.png"/>
52152 <para>This will add a column to the check out summary in the OPAC that
52153 shows the patrons the barcodes of the items they have checked
52157 <screeninfo>Barcode number on checkout list in OPAC</screeninfo>
52161 <imagedata fileref="images/opac/barcodeoncheckouts.png"/>
52166 <para>Clicking on the 'Overdue' tab will show only the items that are
52171 <section id="circfaq">
52172 <title><link linkend="circfaq">Circulation/Notices</link></title>
52176 <section id="dropboxfaq">
52177 <title><link linkend="dropboxfaq">Book drop Date</link></title>
52179 <para><emphasis role="bold">Question</emphasis>: How is the book drop date is determined? Is
52180 it the last open date for the checkout branch? Is it today's date minus one? Can the book
52181 drop checkin date be set?</para>
52183 <para><emphasis role="bold">Answer</emphasis>: If the library is closed for four days for
52184 renovations, for example, there would be more than one day needed for the book drop date.
52185 You will only have one book drop date and that will be the last day that the library open
52186 (determined by the holiday calendar) because there is no real way to know what day the
52187 books were dropped into the box during the 4 closed days. The only way to change the
52188 effective checkin date in book drop mode is to modify the calendar.</para>
52190 <section id="holdsreportsfaq">
52191 <title><link linkend="holdsreportsfaq">Holds to Pull and Holds Queue</link></title>
52192 <para><emphasis role="bold">Question</emphasis>: What is the difference between the <link linkend="holdsqueue">Holds Queue</link> and <link linkend="holdspull">Holds to
52193 Pull</link>?</para>
52194 <para><emphasis role="bold">Answer</emphasis>: The holds to pull report gives a simple list
52195 of what holds need to be filled with available items. It should only be used in Koha
52196 installations where there is only one library. </para>
52197 <para>The holds queue tries to do the same thing, but in a 'smarter' way. This allows it to
52198 split up the list by library, consult the <link linkend="transportcostmatrix">transport
52199 cost matrix</link> and refresh regularly to provide different pull lists to each
52203 <section id="dupoverduefaq">
52204 <title><link linkend="dupoverduefaq">Duplicate Overdue Notices</link></title>
52206 <para><emphasis role="bold">Question</emphasis>: Why are patrons
52207 getting two overdue notices?</para>
52209 <para><emphasis role="bold">Answer</emphasis>: This tool takes all
52210 branches in the overdue rules and sent notifications to them. So, if
52211 you have a default rule & a branch rule, the notification will be
52212 generated twice. A quick fix is to discard "default rule" for
52216 <section id="printoverduefaq">
52217 <title><link linkend="printoverduefaq">Printing Overdue Notices</link></title>
52219 <para><emphasis role="bold">Question</emphasis>: Can I print overdue
52220 notices for patrons without email addresses on file?</para>
52222 <para><emphasis role="bold">Answer</emphasis>: Yes. The <link linkend="overduenoticecron">overdue notice cron job</link> has a
52223 setting to generate the overdue notices as HTML for printing. An
52224 example of this usage would be:</para>
52226 <para><programlisting>overdue_notices.pl -t -html /tmp/noticedir -itemscontent issuedate,date_due,title,barcode,author </programlisting>In
52227 this example, we wanted to use only certain item fields in our
52228 notices, so we specified itemscontent fields in the cron entry; that's
52229 not a requirement for the feature.</para>
52231 <para>The command line needs to specify a web-accessible directory
52232 where the print notices will go -- they get a filename like
52233 notices-2009-11-24.html (or holdnotices-2009-11-24.html). The overdue
52234 notice itself can be formatted to fit a Z-mailer. Within the notice
52235 file, the text is spaced down or over to where it will print properly
52236 on the form. The script has code that wraps around the notice file to
52237 tell the HTML to obey the formatting, and to do a page break between
52238 notices. That's so that when staff print it out, they get one per
52239 page. We had to add an extra syspref (<link linkend="PrintNoticesMaxLines">PrintNoticesMaxLines</link>) to specify
52240 page length because our client allows a _lot_ of checkouts which meant
52241 some notices were running onto multiple pages. That syspref says to
52242 truncate the print notice at that page length and put in a message
52243 about go check your OPAC account for the full list.</para>
52245 <para>The print and email overdues use the same notice file. The print
52246 notices for holds are different -- there's a separate HOLD_PRINT
52247 notice file and the system uses it if there's no email address. Then a
52248 nightly cron job runs to gather those up from the message queue and
52249 put them in an HTML file in the notice directory, as above.</para>
52251 <para>The cron entry is gather_print_notices.pl /tmp/noticedir</para>
52254 <section id="renewfaq">
52255 <title><link linkend="renewfaq">Unable to Renew Items</link></title>
52257 <para><emphasis role="bold">Question</emphasis>: We're trying to renew
52258 some items for our patron. One of the items is on hold and ineligible
52259 for renewal, but the other two items refuse to renew even though they
52260 should be eligible. When I try to use the override renewal limit, it
52261 just returns a little message that says "renewal failed". Any idea
52262 what's going on here?</para>
52264 <para><emphasis role="bold">Answer</emphasis>: At the very least you will need to set an
52265 absolute <link linkend="circfinerules">default circulation rule</link>. This rule should
52266 be set for the default itemtype, default branchcode and default patron category. That will
52267 catch anyone who doesn't match a specific rule. Patrons who do not match a specific rule
52268 will get blocked from placing holds or renewing items, since there was no baseline number
52269 of holds or renewals to utilize.</para>
52272 <section id="holdsfaq">
52273 <title><link linkend="holdsfaq">Unable to Place Holds</link></title>
52275 <para><emphasis role="bold">Question</emphasis>: Why can't I place
52276 holds when I have all of the preferences turned on.</para>
52278 <para><emphasis role="bold">Answer</emphasis>: You probably need to
52279 set a default circulation rule. At the very least you will need to set
52280 an default circulation rule. This rule should be set for all item
52281 types, all branches and all patron categories. That will catch all
52282 instances that do not match a specific rule. When checking out if you
52283 do not have a rule for the default branch, default item and default
52284 patron category then you may see patrons getting blocked from placing
52288 <section id="keyboardshort">
52289 <title><link linkend="keyboardshort">Keyboard Shortcuts</link></title>
52291 <para><emphasis role="bold">Question</emphasis>: Do I have to use my
52292 mouse to access the checkout, checkin and cataloging tabs at the top
52293 of the circulation pages?</para>
52295 <para><emphasis role="bold">Answer</emphasis>: You can jump between
52296 the tabs on the quick search box at the top of the screen by using the
52297 following hot keys (if the tab is available):</para>
52301 <para>jump to the catalog search with Alt+Q</para>
52305 <para>jump to the checkout with Alt+U</para>
52309 <para>this will not work for Mac user</para>
52315 <para>jump to the checkin with Alt+R</para>
52320 <para>Mac users use the OPTION button in place of ALT</para>
52324 <section id="smsnoticefaq">
52325 <title><link linkend="smsnoticefaq">SMS Notices/Messages</link></title>
52327 <para><emphasis role="bold">Question</emphasis>: I want Koha to send
52328 notices via SMS, what do I need to do?</para>
52330 <para><emphasis role="bold">Answer</emphasis>: First you need to
52331 choose a SMS service to use with Koha. There is a list available here:
52332 <ulink url="http://search.cpan.org/search?query=sms%3A%3Asend&mode=all">http://search.cpan.org/search?query=sms%3A%3Asend&mode=all</ulink>
52333 Not all SMS services available to libraries have Perl drivers, so be
52334 sure to check this list to see if the provider you're considering is
52335 listed. If not you want to ask your provider if they have a Perl
52336 module, if not you should consider another service. Some common
52337 options in the US (that have Perl drivers) are:</para>
52341 <para>AQL (<ulink url="http://www.aql.com">www.aql.com</ulink>)</para>
52345 <para>Wadja (<ulink url="http://wadja.com">wadja.com</ulink>)</para>
52349 <para>Ipipi (<ulink url="http://ipipi.com">ipipi.com</ulink>)</para>
52353 <para>T-mobile</para>
52357 <para>SMSDiscount (<ulink url="http://smsdiscount.com">smsdiscount.com</ulink>)</para>
52361 <para>Clickatell</para>
52364 <para><emphasis role="bold">Question</emphasis>: What about in India?</para>
52366 <para><emphasis role="bold">Answer</emphasis>: India does not yet have too many options
52367 here. This is partly due to the Telecom regulatory authority's (TRAI) stipulations about
52368 transactional SMSes and limits on the number of SMSes that may be sent / received per
52369 users per day. India specific drivers include: <itemizedlist>
52371 <para>Unicel Technologies Pvt Ltd (<ulink url="http://unicel.in">unicel.in</ulink>)</para>
52373 </itemizedlist></para>
52377 <section id="catfaq">
52378 <title><link linkend="catfaq">Cataloging</link></title>
52382 <section id="authorityfaq">
52383 <title><link linkend="authorityfaq">Authority Fields</link></title>
52385 <para><emphasis role="bold">Question: </emphasis>Why can't I edit 1xx,
52386 6xx, or 7xx fields in my catalog record?</para>
52388 <para><emphasis role="bold">Answer:</emphasis> These fields are authority controlled and you
52389 probably have the <link linkend="BiblioAddsAuthorities">BiblioAddsAuthorities</link> set
52390 to "Don't allow". When it is set to "Don't allow" these fields will be locked and require
52391 you to search for an existing authority record to populate the field with. To allow typing
52392 in these authority fields set <link linkend="BiblioAddsAuthorities">BiblioAddsAuthorities</link> to 'Allow'.<note>
52393 <para>Fields affected by this preference will show a lock symbol in them</para>
52397 <screeninfo>Fields affected by this preference show a lock in the field</screeninfo>
52401 <imagedata fileref="images/cataloging/lockedauthority.png"/>
52407 <section id="kohamarcfaq">
52408 <title><link linkend="kohamarcfaq">Koha to MARC Mapping</link></title>
52410 <para><emphasis role="bold">Question</emphasis>: What's the
52411 relationship between 'Koha to MARC Mapping' and 'MARC Bibliographic
52412 Frameworks'?</para>
52414 <para><emphasis role="bold">Answer</emphasis>: Mapping can be defined
52415 through 'MARC Bibliographic Frameworks' OR 'Koha to MARC Mapping'.
52416 'Koha to MARC Mapping' is just a shortcut to speed up linkage. If you
52417 change a mapping in one of these modules, the mapping will change in
52418 the other as well. (In other words, the two modules 'overwrite' each
52419 other in order to prevent conflicts from existing in Koha).</para>
52422 <section id="itemsperbibfaq">
52423 <title><link linkend="itemsperbibfaq">Number of Items Per Bib Record</link></title>
52425 <para><emphasis role="bold">Question</emphasis>: Is there a limit on
52426 the number of items I can attach to a bib record?</para>
52428 <para><emphasis role="bold">Answer</emphasis>: There is no explicit limit to the number of
52429 items you can attach to a bibliographic record, but if you attach enough of them, your
52430 MARC record will exceed the maximum file size limit for the ISO 2709 standard, which
52431 breaks indexing for that record. I've found this occurs somewhere between 600 and 1000
52432 items on a 'normal' bibliographic record.</para>
52435 <section id="analyticsfaq">
52436 <title><link linkend="analyticsfaq">Analytics</link></title>
52438 <para><emphasis role="bold">Question</emphasis>: I am using the <link linkend="EasyAnalyticalRecords">EasyAnalyticalRecords</link> feature,
52439 but my links in the OPAC and Staff Client to 'Show Analytics' are not
52442 <para><emphasis role="bold">Answer</emphasis>: If you plan on using
52443 <link linkend="EasyAnalyticalRecords">EasyAnalyticalRecords</link> you
52444 will want to make sure to set your <link linkend="UseControlNumber">UseControlNumber</link> preference to
52445 "Don't use," this will prevent broken links.</para>
52449 <section id="acqfaq">
52450 <title><link linkend="acqfaq">Acquisitions</link></title>
52454 <section id="planningcatfaq">
52455 <title><link linkend="planningcatfaq">Planning Categories</link></title>
52457 <para><emphasis role="bold">Question</emphasis>: What is a planning
52460 <para><emphasis role="bold">Answer</emphasis>: When you plan in
52461 advance for the way your budget is going to be spent, you initially
52462 plan for how it's going to be spent over time, that's the most natural
52463 thing to do.</para>
52465 <para>So you plan for $1000 in Jan. $1000 in Feb., $3000 in March,
52466 etc. You can basically do the same thing with a list of values in lieu
52467 of the months.</para>
52469 <para>Say you have a list like this one:</para>
52473 <para>< 1 month</para>
52477 <para>< 6 months</para>
52481 <para>< 1 year</para>
52485 <para>< 3 years</para>
52489 <para>< 10 years</para>
52493 <para>> 10 years</para>
52497 <para>The list is meant to represent when the books acquired where
52498 published. Then you plan for it, saying: we went to spend at list 40%
52499 of our budgets on books published less than a year ago, 10% on books
52500 more than 10 years old, etc.</para>
52502 <para>Upon acquiring new material, you'll be able to select, for a
52503 given item, a value from this list in a drop down. Then, after the
52504 material has been acquired, at the end of the year, you'll be able to
52505 compare the goals set, with what's been achieved.</para>
52509 <section id="serialsfaq">
52510 <title><link linkend="serialsfaq">Serials</link></title>
52514 <section id="advancedpatternfaq">
52515 <title><link linkend="advancedpatternfaq">Advanced Patterns</link></title>
52517 <para><emphasis role="bold">Question</emphasis>: What is the 'inner
52518 counter' on the advanced serials pattern interface?</para>
52520 <para><emphasis role="bold">Answer</emphasis>: I think it is better to
52521 give an example to understand this :</para>
52523 <para>Example for a monthly subscription :</para>
52527 <para>First issue publication date : April 2010</para>
52531 <para>Numbering : No {X}, year {Y}</para>
52535 <para>First issue : No 4, year 2010</para>
52539 <para>For the year Y : you will want the year change on January
52542 <para>So, the advanced pattern for Y will be :</para>
52546 <para>Add : 1</para>
52550 <para>once every : 12</para>
52554 <para>When more than 9999999</para>
52558 <para>inner counter : 3</para>
52562 <para>Set back to 0</para>
52566 <para>Begins with 2010</para>
52570 <para>Year is going to change after 12 received issues from April
52571 2010, that is in April 2011 if you don't set inner counter. Set inner
52572 counter to 3 will say to Koha : change year after 12-3 = 9 received
52575 <para>Inner counter says to Koha to take into account the first issues
52576 of the year, even if they are not received with Koha. If you begin
52577 with first issue of the year write nothing or 0.</para>
52581 <section id="reportsfaq">
52582 <title><link linkend="reportsfaq">Reports</link></title>
52586 <section id="accounttypefaq">
52587 <title><link linkend="accounttypefaq">Define Codes Stored in DB</link></title>
52591 <section id="finescodefaq">
52592 <title><link linkend="finescodefaq">Fines Table</link></title>
52594 <para><emphasis role="bold">Question:</emphasis> What do the codes
52595 in the accounttype field in the accountlines table stand for?</para>
52597 <para><emphasis role="bold">Answer:</emphasis></para>
52601 <para>A = Account management fee</para>
52605 <para>C = Credit</para>
52609 <para>F = Overdue fine</para>
52613 <para>FOR = Forgiven</para>
52617 <para>FU = Overdue, still acccruing</para>
52621 <para>L = Lost item</para>
52624 <para>LR = Lost item returned/refunded</para>
52628 <para>M = Sundry</para>
52632 <para>N = New card</para>
52636 <para>PAY = Payment</para>
52640 <para>W = Writeoff</para>
52645 <section id="statscodefaq">
52646 <title><link linkend="statscodefaq">Statistics Table</link></title>
52648 <para><emphasis role="bold">Question: </emphasis>What are the
52649 possible codes for the type field in the statistics table?</para>
52651 <para><emphasis role="bold">Answer:</emphasis></para>
52655 <para>localuse</para>
52659 <para>Registers if an item that had been checked out to a
52660 statistics patron (category type = 'X') is returned</para>
52670 <para>return</para>
52678 <para>writeoff</para>
52682 <para>payment</para>
52686 <para>CreditXXX</para>
52690 <para>The XXX stores different types of fee credits, so a query to catch them all
52691 would include a clause like "type LIKE 'Credit%'"</para>
52698 <section id="rescodefaq">
52699 <title><link linkend="rescodefaq">Reserves Table</link></title>
52701 <para><emphasis role="bold">Question</emphasis>: What are the
52702 possible codes for the found field in the reserves and old_reserves
52705 <para><emphasis role="bold">Answer</emphasis>:</para>
52709 <para>NULL: means the patron requested the 1st available, and we
52710 haven't chosen the item</para>
52714 <para>T = Transit: the reserve is linked to an item but is in
52715 transit to the pickup branch</para>
52719 <para>W = Waiting: the reserve is linked to an item, is at the pickup branch, and is
52720 waiting on the hold shelf</para>
52724 <para>F = Finished: the reserve has been completed, and is
52730 <section id="reportdicfaq">
52731 <title><link linkend="reportdicfaq">Reports Dictionary Table</link></title>
52733 <para><emphasis role="bold">Question</emphasis>: What are the
52734 possible codes for the area field in the reports_dictionary
52737 <para><emphasis role="bold">Answer</emphasis>:</para>
52741 <para>1 = Circulation</para>
52745 <para>2 = Catalog</para>
52749 <para>3 = Patrons</para>
52753 <para>4 = Acquisitions</para>
52757 <para>5 = Accounts</para>
52762 <section id="msgtablefaq">
52763 <title><link linkend="msgtablefaq">Messages Table</link></title>
52765 <para><emphasis role="bold">Question</emphasis>: What are the
52766 possible codes for the message_type field in the messages
52769 <para><emphasis role="bold">Answer</emphasis>:</para>
52773 <para>L = For Librarians</para>
52777 <para>B = For Patrons/Borrowers</para>
52782 <section id="serialtablefaq">
52783 <title><link linkend="serialtablefaq">Serial Table</link></title>
52785 <para><emphasis role="bold">Question</emphasis>: What are the possible codes for the
52786 status field in the serial table?</para>
52788 <para><emphasis role="bold">Answer</emphasis>:</para>
52792 <para>1 = Expected </para>
52795 <para>2 = Arrived </para>
52798 <para>3 = Late </para>
52801 <para>4 = Missing </para>
52804 <para>5 = Not available </para>
52807 <para>6 = Delete</para>
52810 <para>7 = Claimed </para>
52813 <para>8 = Stopped</para>
52816 <para>41 = Missing (not received) </para>
52819 <para>42 = Missing (sold out) </para>
52822 <para>43 = Missing (damaged) </para>
52825 <para>44 = Missing (lost)</para>
52829 <section id="borrowerprivacyvalues">
52830 <title><link linkend="borrowerprivacyvalues">Borrowers Table</link></title>
52831 <para><emphasis role="bold">Question</emphasis>: What are the possible codes for the
52832 privacy field in the borrowers table?</para>
52833 <para><emphasis role="bold">Answer</emphasis>:<itemizedlist>
52835 <para>0 = Forever</para>
52838 <para>1 = Default</para>
52841 <para>2 = Never</para>
52843 </itemizedlist></para>
52845 <section id="messpreffaq">
52846 <title><link linkend="messpreffaq">Messaging Preferences</link></title>
52847 <para><emphasis role="bold">Question</emphasis>: What are the possible codes in the
52848 message_attribute_id field in the borrower_message_preferences table?</para>
52849 <para><emphasis role="bold">Answer</emphasis>:<itemizedlist>
52851 <para>2 = advanced notice </para>
52854 <para>6 = item checkout </para>
52857 <para>4 = hold filled </para>
52860 <para>1 = item due </para>
52863 <para>5 = item check in</para>
52865 </itemizedlist></para>
52869 <section id="runtimefaq">
52870 <title><link linkend="runtimefaq">Runtime Parameters</link></title>
52872 <para><emphasis role="bold">Question</emphasis>: Is there a way to
52873 filter my custom SQL reports before they run?</para>
52875 <para><emphasis role="bold">Answer</emphasis>: If you feel that your
52876 report might be too resource intensive you might want to consider
52877 using runtime parameters to your query. Runtime parameters basically
52878 make a filter appear before the report is run to save your system
52881 <para>There is a specific syntax that Koha will understand as 'ask for
52882 values when running the report'. The syntax is <<Question to
52883 ask|authorized_value>>.</para>
52887 <para>The << and >> are just delimiters. You must put
52888 << at the beginning and >> at the end of your
52893 <para>The 'Question to ask' will be displayed on the left of the
52894 string to enter.</para>
52898 <para>The authorized_value can be omitted if not applicable. If it contains an
52899 authorized value category, or branches or itemtype or categorycode or
52900 biblio_framework, a list with the Koha authorized values will be displayed instead of
52901 a free field Note that you can have more than one parameter in a given SQL Note that
52902 entering nothing at run time won't probably work as you expect. It will be considered
52903 as "value empty" not as "ignore this parameter". For example entering nothing for :
52904 "title=<<Enter title>>" will display results with title='' (no title). If
52905 you want to have to have something not mandatory, use "title like <<Enter
52906 title>>" and enter a % at run time instead of nothing</para>
52910 <para>Examples:</para>
52914 <para>SELECT surname,firstname FROM borrowers WHERE
52915 branchcode=<<Enter patrons library|branches>> AND
52916 surname like <<Enter filter for patron surname (% if
52917 none)>></para>
52921 <para>SELECT * FROM items WHERE homebranch = <<Pick your branch|branches>>
52922 and barcode like <<Partial barcode value here>></para>
52925 <para>SELECT title , author FROM biblio WHERE frameworkcode=<<Enter the
52926 frameworkcode|biblio_framework>> </para>
52931 <para>To generate a date picker calendar to the right of the field
52932 when running a report you can use the 'date' keyword like this:
52933 <<Enter Date|date>></para>
52936 <screeninfo>Date Picker</screeninfo>
52940 <imagedata fileref="images/reports/datepicker.png"/>
52947 <para>You have to put "%" in a text box to 'leave it blank'.
52948 Otherwise, it literally looks for "" (empty string) as the value for
52953 <para>In addition to using any authorized value code to generate a dropdown, you can use
52954 the following values as well: Framework codes (biblio_framework), Branches (branches),
52955 Item Types (itemtypes) and Patron Categories (categorycode). For example a branch pull
52956 down would be generated like this <<Branch|branches>></para>
52959 <screeninfo>Branch pull down</screeninfo>
52963 <imagedata fileref="images/reports/branchpulldown.png"/>
52967 </important></para>
52970 <section id="reportlimitfaq">
52971 <title><link linkend="reportlimitfaq">Results Limited</link></title>
52973 <para><emphasis role="bold">Question</emphasis>: When I download my
52974 report it's limited to 10,000 results, how do I get all of the results
52975 to download?</para>
52977 <para><emphasis role="bold">Answer</emphasis>: There is a limit of
52978 10,000 records put on SQL statements entered in Koha. To get around
52979 this you want to add 'LIMIT 100000' to the end of your SQL statement
52980 (or any other number above 10,000.</para>
52984 <section id="searchfaq">
52985 <title><link linkend="searchfaq">Searching</link></title>
52989 <section id="advancedsearchfaq">
52990 <title><link linkend="advancedsearchfaq">Advanced Search</link></title>
52994 <section id="scanindexfaq">
52995 <title><link linkend="scanindexfaq">Scan Indexes</link></title>
52997 <para><emphasis role="bold">Question</emphasis>: What does 'scan
52998 indexes' on the advanced search page mean?</para>
53000 <para><emphasis role="bold">Answer</emphasis>: When you choose an
53001 index, enter a term, click 'scan indexes' and do the search, Koha
53002 displays the searched term and the following terms found in this
53003 index with the number of corresponding records That is search is not
53004 made directly in the catalog, but first in the indexes It works only
53005 for one index at once, and only with no limit in Location (All
53006 libraries needed)</para>
53009 <section id="searchstartswith">
53010 <title><link linkend="searchstartswith">Searching for Terms that Start With a Character</link></title>
53012 <para><emphasis role="bold">Question</emphasis>: How do I search for
53013 all titles that start with the letter 'C'?</para>
53015 <para><emphasis role="bold">Answer</emphasis>: You can choose to
53016 search for things that start with a character or series of
53017 characters by using the CCL 'first-in-subfield'</para>
53021 <para>example: ti,first-in-subfield=C</para>
53027 <section id="wildcardsearchfaq">
53028 <title><link linkend="wildcardsearchfaq">Wildcard Searching</link></title>
53030 <para><emphasis role="bold">Question</emphasis>:What is the difference
53031 between a keyword search using the '*' (asterisk) versus a keyword
53032 search using the '%' (percent)? Both work in the catalog, but return
53033 different sets. Why?</para>
53035 <para><emphasis role="bold">Answer</emphasis>: A wildcard is a
53036 character (*,?,%,.) that can be used to represent one or more
53037 characters in a word. Two of the wildcard characters that can be used
53038 in Koha searches are the asterisk ('*') and the percent sign ('%').
53039 However, these two characters act differently when used in
53042 <para>The '*' is going to force a more exact search of the first few
53043 characters you enter prior to the '*'. The asterisk will allow for an
53044 infinite number of characters in the search as long as the first few
53045 characters designated by your search remain the same. For example,
53046 searching for authors using the term, Smi*, will return a list that
53047 may include Smith, Smithers, Smithfield, Smiley, etc depending on the
53048 authors in your database.</para>
53050 <para>The '%' will treat the words you enter in the terms of "is
53051 like". So a search of Smi% will search for words like Smi. This
53052 results in a much more varied results list. For example, a search on
53053 Smi% will return a list containing Smothers, Smith, Smelley,
53054 Smithfield and many others depending on what is your database.</para>
53056 <para>The bottom line in searching with wildcards: '*' is more exact
53057 while '%' searches for like terms.</para>
53059 <section id="titlesearchingfaq">
53060 <title><link linkend="titlesearchingfaq">Title Searching</link></title>
53061 <para><emphasis role="bold">Question</emphasis>: Why does my Zebra title search for 'Help'
53062 not turn up 'The help' in the first pages of results?</para>
53063 <para><emphasis role="bold">Answer</emphasis>: When doing a title search, you actually want
53064 to search for the title (i.e., 'the help' rather than just 'help'), and it will bubble
53065 right up to the top. If you're just searching for 'help' then the relevance ranking is
53066 going to affect the results you see. </para>
53067 <para>When it comes to relevance in Zebra, here's what's happening. First, the search is
53068 done. If you search for the title "help", then any title that has "help" in it comes back.
53069 Then from those records, separately, it does relevance on the *whole* record. The more
53070 your word appears, the more relevant, and some MARC tags are worth more points than
53071 others. So a self-help book with 505 notes where "help" appears a *lot* will be at the
53072 top, regardless of keyword or title.</para>
53073 <para>But when you add a *second word*, that helps it figure things out, as it's weighing
53074 the relevance of both words and the phrase. Because of the way relevance works, if you
53075 search "the help", then "the help" or "the help I need" are more relevant than "the way to
53076 help", because they appear together in order. Likewise, "help the girl" would be lower
53077 relevance, because it's out of order, and "help for the homeless" would be lower still, as
53078 they're out of order, and apart.</para>
53079 <para>The moral of the story is that single word searches, particularly on common words,
53080 will always struggle a bit; it can't evaluate relevance well, because you've not given it
53081 enough input.</para>
53085 <section id="enhancedcontentfaq">
53086 <title><link linkend="enhancedcontentfaq">Enhanced Content</link></title>
53090 <section id="frbrfaq">
53091 <title><link linkend="frbrfaq">FRBRizing Content</link></title>
53093 <para><emphasis role="bold">Question: </emphasis>At our public library
53094 we are running a Koha installation and we've tried to turn on all the
53095 nice functionalities in Koha such as the frbrising tool, but do not
53096 get the same result as Nelsonville public library.</para>
53098 <para><emphasis role="bold">Answer: </emphasis>In fact, this feature
53099 is quite tricky to make that right. First it looks at XISBN service.
53100 And then search in your database for that ISBN. So both XISBN and your
53101 internal ISBN (in biblio table) have to be normalized. You could
53102 therefore use the script misc/batchupdateISBNs.pl (it removes all the
53103 - in your local ISBNs)</para>
53106 <section id="amzfaq">
53107 <title><link linkend="amzfaq">Amazon</link></title>
53111 <section id="amazonfaq">
53112 <title><link linkend="amazonfaq">All Amazon Content</link></title>
53114 <para><emphasis role="bold">Question</emphasis>: I have all of the
53115 Amazon preferences turned on and have entered both of my keys, but
53116 none of the content appears in my system, why is that?</para>
53118 <para><emphasis role="bold">Answer</emphasis>: Amazon's API checks
53119 your server time on all requests and if your server time is not set
53120 properly requests will be denied. To resolve this issue be sure to
53121 set your system time appropriately. Once that change in made Amazon
53122 content should appear immediately.</para>
53124 <para>On Debian the the command is <emphasis>date -s "2010-06-30
53125 17:21"</emphasis> (with the proper date and time for your
53131 <section id="systemfaq">
53132 <title><link linkend="systemfaq">System Administration</link></title>
53136 <section id="zebracronfaq">
53137 <title><link linkend="zebracronfaq">Errors in Zebra Cron</link></title>
53139 <para><emphasis role="bold">Question</emphasis>: I am noticing some
53140 errors in the koha-zebradaemon-output.log file. When new records are
53141 added it takes a bit longer to index than we think they should.
53142 Running rebuild zebra is often faster. Zebra ends up indexing and
53143 search works, but I am concerned about the errors. Any ideas?</para>
53145 <para><emphasis role="bold">Answer</emphasis>: Rebuild_zebra.pl -r
53146 deletes all of the files in the Zebra db directories (such as
53147 reci-0.mf) and then recreates them. Thus, permissions will be lost,
53148 and the files will be owned by the user who ran rebuild_zebra.pl. If
53149 one rebuilds the zebra indexes as root, the daemons, which typically
53150 run under the user Koha, will not be able to update the indexes. Thus,
53151 it's important then that the zebra rebuilds are put in the cronjob
53152 file of the user Koha, and not root. Also important is that other
53153 users, such as root, don't manually execute rebuilds.</para>
53155 <para>If one desires that another user be able to execute
53156 rebuild_zebra.pl, he should be given the permission to execute 'sudo
53157 -u Koha .../rebuild_zebra.pl,' (if you want to do this, you also have
53158 to edit the sudoers file to pass the PERL5LIB variable with the
53159 env_keep option as by default sudo strips away almost all environment
53160 variables). Or, as root user, one can use a simple 'su koha' and then
53161 the rebuild_zebra.pl command.</para>
53163 <para>I've also tried to set the sticky bit on rebuild_zebra.pl, but
53164 for whatever reason it didn't seem to work due to some problem with
53165 the PERL5LIB variable that I wasn't able to figure. That seems to me
53166 the easiest thing to do, if anybody has any idea how to make it work.
53167 If it worked and were the default, I think it would help folks to
53168 avoid a great deal of the problems that come up with zebra.</para>
53171 <section id="publicztarget">
53172 <title><link linkend="publicztarget">Making Z39.50 Target Public</link></title>
53174 <para><emphasis role="bold">Question</emphasis>: Could someone tell me
53175 the exact steps I need to take to configure Zebra to expose my Koha 3
53176 db as a public Z39.50 service?</para>
53178 <para><emphasis role="bold">Answer</emphasis>: Edit the KOHA_CONF file
53179 that your Koha is using. Uncomment the publicserver line like:</para>
53181 <para><!-- <listen id="publicserver"
53182 >tcp:@:9999</listen> --></para>
53184 <para>to be:</para>
53186 <para><listen id="publicserver"
53187 >tcp:@:9999</listen></para>
53189 <para>Then restart zebasrv and connect on the port specified
53193 <section id="authvalfaq">
53194 <title><link linkend="authvalfaq">Shelving Location Authorized Values</link></title>
53196 <para><emphasis role="bold">Question</emphasis>: When editing an item,
53197 the new shelving location I created is not showing up by default in
53198 the items where I assigned it to.</para>
53200 <para><emphasis role="bold">Answer</emphasis>: This is because you
53201 created the new shelving location with a code value of 0 (zero) Just
53202 FYI the system interprets authorized values of 0 as equaling a null so
53203 when you edit a record in cataloging where the authorized value in a
53204 field was assigned where the code was 0, the value displays as null in
53205 the item editor (or MARC editor) instead of the value the library
53206 meant it to be.</para>
53209 <section id="whyauthvals">
53210 <title><link linkend="whyauthvals">Why do I need Authorized Values?</link></title>
53212 <para><emphasis role="bold">Question</emphasis>: Why would I want to
53213 define authorized values for MARC tags?</para>
53215 <para><emphasis role="bold">Answer</emphasis>: Authorized Values
53216 create a 'controlled vocabulary' for your staff. As an example, let us
53217 assume that your Koha installation is used by several libraries, and
53218 you use MARC 21. You might want to restrict the 850a MARC subfield to
53219 the institution codes for just those libraries. In that case, you
53220 could define an authorized values category (perhaps called "INST") and
53221 enter the institution codes as the authorized values for that
53225 <para>Koha automatically sets up authorized value categories for
53226 your item types and branch codes, and you can link these authorized
53227 values to MARC subfields when you set up your MARC tag
53232 <section id="sessionstblfaq">
53233 <title><link linkend="sessionstblfaq">How do I clean up the sessions table?</link></title>
53235 <para><emphasis role="bold">Question</emphasis>: Is there a periodic
53236 job that can be run to cull old sessions from the table? We don't want
53237 to backup all the useless session data every night.</para>
53239 <para><emphasis role="bold">Answer</emphasis>: You can run <link linkend="cleandbcron">cleanup database cron job</link>.</para>
53241 <para>Or just before doing a backup command (mysqldump), you can
53242 truncate session table: </para>
53244 <para><programlisting>mysql -u<kohauser -p<password <koha-db-name -e 'TRUNCATE TABLE sessions'</programlisting></para>
53248 <section id="hardwarefaq">
53249 <title><link linkend="hardwarefaq">Hardware</link></title>
53253 <section id="barcodefaq">
53254 <title><link linkend="barcodefaq">Barcode Scanners</link></title>
53256 <para><emphasis role="bold">Question</emphasis>: What barcode scanners
53257 have been known to work with Koha?</para>
53259 <para><emphasis role="bold">Answer</emphasis>: The simple rule of
53260 thumb is, does it act like a keyboard device?, if so, it will work.
53261 (i.e. can you take the scanner, scan a barcode and have it show up in
53262 a text editor, if so, it will work.)</para>
53264 <para>The main points to check are that it connects to your PC
53265 conveniently (can be USB or "keyboard wedge" which means it connects
53266 in line with the keyboard, which is useful with older computers), and
53267 that it scans the barcode type that you are using.</para>
53269 <para>It is a good idea to test some 'used' barcodes if you have any,
53270 to see whether the scanner can read scuffed or slightly wrinkled ones
53271 successfully. Most scanners are capable of reading several barcode
53272 types - there are many, and the specification should list the ones it
53273 can read. You may need to adjust settings slightly, such as prefix and
53274 suffix characters, or whether you want to send an 'enter' character or
53277 <para>One more tip - some can be set 'always on' and may come with a
53278 stand, some have triggers under the handle, some have buttons on top,
53279 some are held like a pen. Think about the staff working with the
53280 hardware before choosing, as a button in the wrong place can be very
53281 awkward to use.</para>
53284 <section id="printersfaq">
53285 <title><link linkend="printersfaq">Printers</link></title>
53289 <section id="kohaprinters">
53290 <title><link linkend="kohaprinters">Printers used by Koha libraries</link></title>
53294 <para>POS-X receipt printer</para>
53298 <para>Star Micronics printer (exact model unknown) with a
53299 generic/plain text driver.</para>
53303 <para>Star SP2000 (Nelsonville)</para>
53307 <para>Star TSP-100 futurePRINT (Geauga)</para>
53311 <para>"I know there have been a lot of questions on receipt
53312 printers so I thought I'd pass on my findings. We have been
53313 testing the Star TSP-100 futurePRINT. I found this print to
53314 be VERY easy to configure for Koha. I was even able to
53315 customize the print job by adding our system logo (a .gif)
53316 to the top of every receipt. Also with a bitmap created in
53317 Paint was able to add a message at the bottom of each
53318 receipt with the contact information, hours and website for
53319 the library that the materials were checked out at."</para>
53325 <para>Epson TM 88 IIIP thermal receipt printers</para>
53329 <para>Epson TM-T88IV</para>
53333 <para>1x1 labels using a Dymolabelwriter printer</para>
53338 <section id="braillefaq">
53339 <title><link linkend="braillefaq">Braille Support</link></title>
53341 <para><emphasis role="bold">Question</emphasis>: Are there any
53342 braille embosser or printer which has inbuilt braille converter and
53343 it is accessible with UNIX environment?</para>
53345 <para><emphasis role="bold">Answer</emphasis>: You may want to look
53346 into BRLTTY (<ulink url="http://www.emptech.info/product_details.php?ID=1232">http://www.emptech.info/product_details.php?ID=1232</ulink>).</para>
53349 <section id="hardwaresupport">
53350 <title><link linkend="hardwaresupport">Additional Support</link></title>
53354 <para><ulink url="http://www.nexpresslibrary.org/go-live/configure-your-receipt-printers/">http://www.nexpresslibrary.org/go-live/configure-your-receipt-printers/</ulink></para>
53362 <appendix id="extending">
53363 <title>Extending Koha</title>
53365 <section id="amzlookup">
53369 <firstname>Cab</firstname>
53370 <surname>Vinton</surname>
53372 <orgname>Sanbornton Public Library</orgname>
53376 <firstname>Nicole C.</firstname>
53377 <surname>Engard</surname>
53381 <pubdate>September 2009</pubdate>
53383 <bibliosource><ulink url="http://lists.katipo.co.nz/pipermail/koha/2009-September/020003.html">http://lists.katipo.co.nz/pipermail/koha/2009-September/020003.html</ulink></bibliosource>
53385 <title><link linkend="amzlookup">Amazon lookup script for Koha libraries</link></title>
53387 <para>We order most of our materials from Amazon, so I've been looking
53388 for a convenient way to tell if a book under consideration is in our
53389 catalog already.</para>
53391 <para>Greasemonkey & a custom user script fit the bill
53396 <para><ulink url="https://addons.mozilla.org/en-US/firefox/addon/748">https://addons.mozilla.org/en-US/firefox/addon/748</ulink></para>
53400 <para><ulink url="http://userscripts.org/scripts/show/56847">http://userscripts.org/scripts/show/56847</ulink></para>
53404 <para>A few caveats:</para>
53408 <para>Like most scripts, this one was designed to work with Firefox;
53409 I haven't explored getting it to work with other browsers.</para>
53413 <para>I'm not a JavaScript programmer -- this was adapted from
53414 others' work. Just a few lines would have to be changed to get the
53415 script to work with your catalog.</para>
53419 <para>It depends on the existence of ISBN for the item in question,
53420 so movies, older books, etc. would not work.</para>
53424 <para>Others have added all sorts of bells & whistles: XISBN lookups
53425 to search for related titles, custom messages based on the status of
53426 items (on order, on hold, etc.), ... just search the UserScripts site
53427 for Amazon + library. For a later date!</para>
53430 <section id="extendkeywordclouds">
53431 <title><link linkend="extendkeywordclouds">Keyword Clouds</link></title>
53433 <para>In addition to the traditional tag cloud available in Koha, there
53434 is a way to generate clouds for popular subjects within Koha.</para>
53436 <para>The <link linkend="keywordclouds">Author/Subject Cloud cron
53437 job</link> is used to help with this process. This cron job sends its
53438 output to files.</para>
53442 <para>/home/koha/mylibrary/koharoot/koha-tmpl/cloud-author.html</para>
53446 <para>/home/koha/yourlibrary/koharoot/koha-tmpl/cloud-subject.html</para>
53450 <para>This means that you can produce clouds for authors, collective
53451 author, all kind of subjects, classifications, etc. And since it works
53452 on zebra indexes, it is quick, even on large DBs. Tags clouds are sent
53453 to files. It's up to library webmaster to deal with those files in order
53454 to include them in <link linkend="OpacMainUserBlock">OPACMainUserBlock</link>, or include them
53455 into their library CMS.</para>
53457 <para>Some libraries even send the file into a Samba shared folder where
53458 webmaster take them, eventually clean them a little bit before
53459 integrating them into navigation widgets or pages.</para>
53462 <section id="newtitlesoption">
53463 <title><link linkend="newtitlesoption">Newest Titles Pulldown</link></title>
53465 <para>Often we want to add a way for our patrons to do searches for the
53466 newest items. In this example I'll show you how to create a pull down
53467 menu of the newest items by item type. These tips will work (with a
53468 couple changes) for collection codes or shelving locations as
53471 <para>First, it's important to note that every link in Koha is a
53472 permanent link. This means if I do a search for everything of a specific
53473 item type sorted by the acquisitions date and bookmark that URL,
53474 whenever I click it I'll see the newest items of that type on the first
53475 few pages of the results.</para>
53477 <para>I took this knowledge and wrote a form takes this functionality in
53478 to consideration. It basically just does a search of your Koha catalog
53479 for a specific item type and sorts the results by acquisitions
53482 <para>The first thing I did was write a MySQL statement to generate a
53483 list of item types for me - why copy and paste when you can use the
53484 power of MySQL?</para>
53486 <para><programlisting>select concat('<option value=\"mc-itype:', itemtype, '\">',description,'</option>') from itemtypes</programlisting></para>
53488 <para>The above looks at the itemtypes table and slaps the necessary
53489 HTML around each item type for me. I then exported that to CSV and
53490 opened it in my text editor and added the other parts of the
53493 <para><programlisting><p><strong>New Items</strong></p>
53494 <p><form name="searchform" method="get" action="/cgi-bin/koha/opac-search.pl">
53495 <input name="idx" value="kw" type="hidden">
53496 <input name="sort_by" value="acqdate_dsc" type="hidden">
53497 <input name="do" value="OK" type="hidden">
53498 <select name="limit" onchange="this.form.submit()">
53499 <option>-- Please choose --</option>
53500 <option value="mc-itype:BOOK">Book</option>
53501 <option value="mc-itype:BOOKCD">Book on CD</option>
53502 <option value="mc-itype:DVD">DVD</option>
53503 <option value="mc-itype:LRG_PRINT">Large print book</option>
53504 <option value="mc-itype:MAGAZINE">Magazine</option>
53505 <option value="mc-itype:NEWSPAPER">Newspaper</option>
53506 <option value="mc-itype:VIDEO">Videocassette</option>
53509 </p></programlisting></para>
53511 <para>Now, what does all of that mean? The important bits are
53514 <para>First the starting of the form.</para>
53516 <para><programlisting><p><form name="searchform" method="get" action="/cgi-bin/koha/opac-search.pl"></programlisting></para>
53518 <para>This tells the browser to take any value selected and put it at
53519 the end of this http://YOURSITE/cgi-bin/koha/opac-search.pl. If you want
53520 to embed this form on your library website (and not on your OPAC) you
53521 can put the full OPAC URL in there.</para>
53523 <para>Next, there is a hidden value that is telling the search to sort
53524 by acquisitions date descending (newest items at the top):</para>
53526 <para><programlisting><input name="sort_by" value="acqdate_dsc" type="hidden"></programlisting></para>
53528 <para>And finally you have an option for each item type you want people
53529 to search.<programlisting><option value="mc-itype:BOOK">Book</option></programlisting></para>
53531 <para>These options each include the string "mc-itype:" which tells Koha
53532 to do an item type search.</para>
53534 <para>Once you have all of that in place you can copy and paste the form
53535 to somewhere on your OPAC. The <ulink url="http://catalog.farmingtonlibraries.org">Farmington Public Libraries
53536 OPAC</ulink> has a few examples of this on the left.</para>
53539 <section id="colorsearch">
53540 <title><link linkend="colorsearch">Cataloging and Searching by Color</link></title>
53542 <para>One of the icon sets installed in Koha includes a series of
53543 colors. This set can be used to catalog and search by color if you'd
53544 like. This guide will walk you use changing collection code to color in
53545 Koha so that you can do this.</para>
53547 <para>The following SQL could be used to add these colors to the CCODE
53548 authorized value category in a batch. If you wanted to use these colors
53549 for another authorized value you'd have to edit this to use that
53552 <programlisting> insert into authorised_values (category, authorised_value, lib,
53553 lib_opac, imageurl) values ('CCODE','000000','Black','','colors/000000.png');
53554 insert into authorised_values (category, authorised_value, lib,
53555 lib_opac, imageurl) values ('CCODE','66cc66','Bright Green','','colors/66cc66.png');
53556 insert into authorised_values (category, authorised_value, lib,
53557 lib_opac, imageurl) values ('CCODE','99cc33','Olive','','colors/99cc33.png');
53558 insert into authorised_values (category, authorised_value, lib,
53559 lib_opac, imageurl) values ('CCODE','3333cc','Dark Blue','','colors/3333cc.png');
53560 insert into authorised_values (category, authorised_value, lib,
53561 lib_opac, imageurl) values ('CCODE','006600' ,'Dark Green','','colors/006600.png');
53562 insert into authorised_values (category, authorised_value, lib,
53563 lib_opac, imageurl) values ('CCODE','6600cc','Plum','','colors/6600cc.png');
53564 insert into authorised_values (category, authorised_value, lib,
53565 lib_opac, imageurl) values ('CCODE','6666cc','Purple','','colors/6666cc.png');
53566 insert into authorised_values (category, authorised_value, lib,
53567 lib_opac, imageurl) values ('CCODE','9999cc','Light Purple','','colors/9999cc.png');
53568 insert into authorised_values (category, authorised_value, lib,
53569 lib_opac, imageurl) values ('CCODE','660000' ,'Burgundy','','colors/660000.png');
53570 insert into authorised_values (category, authorised_value, lib,
53571 lib_opac, imageurl) values ('CCODE','663333' ,'Brown','','colors/663333.png');
53572 insert into authorised_values (category, authorised_value, lib,
53573 lib_opac, imageurl) values ('CCODE','990000' ,'Red','','colors/990000.png');
53574 insert into authorised_values (category, authorised_value, lib,
53575 lib_opac, imageurl) values ('CCODE','996633' ,'Tan','','colors/996633.png');
53576 insert into authorised_values (category, authorised_value, lib,
53577 lib_opac, imageurl) values ('CCODE','999999' ,'Gray','','colors/999999.png');
53578 insert into authorised_values (category, authorised_value, lib,
53579 lib_opac, imageurl) values ('CCODE','cc66cc','Pink','','colors/cc66cc.png');
53580 insert into authorised_values (category, authorised_value, lib,
53581 lib_opac, imageurl) values ('CCODE','cc99cc','Bubble Gum','','colors/cc99cc.png');
53582 insert into authorised_values (category, authorised_value, lib,
53583 lib_opac, imageurl) values ('CCODE','cc3333' ,'Orange','','colors/cc3333.png');
53584 insert into authorised_values (category, authorised_value, lib,
53585 lib_opac, imageurl) values ('CCODE','cc6666' ,'Peach','','colors/cc6666.png');
53586 insert into authorised_values (category, authorised_value, lib,
53587 lib_opac, imageurl) values ('CCODE','cc9999' ,'Rose','','colors/cc9999.png');
53588 insert into authorised_values (category, authorised_value, lib,
53589 lib_opac, imageurl) values ('CCODE','cccc00' ,'Gold','','colors/cccc00.png');
53590 insert into authorised_values (category, authorised_value, lib,
53591 lib_opac, imageurl) values ('CCODE','ffff33' ,'Yellow','','colors/ffff33.png');
53592 insert into authorised_values (category, authorised_value, lib,
53593 lib_opac, imageurl) values ('CCODE','ffffcc','Cream','','colors/ffffcc.png');
53594 insert into authorised_values (category, authorised_value, lib,
53595 lib_opac, imageurl) values ('CCODE','ffffff','White','','colors/ffffff.png');</programlisting>
53597 <para>If you would like to choose the colors manually you can do that
53598 via the <link linkend="authorizedvalues">Authorized Values</link>
53599 administration area.</para>
53602 <screeninfo>Colors for CCODE</screeninfo>
53606 <imagedata fileref="images/appendix-extending/colorccode.png"/>
53611 <para>Next you'll want to <link linkend="marcbibframeworks">update the
53612 frameworks</link> so that the 952$8 (if you're using collection code)
53613 label to says Color.</para>
53615 <para>Once you have that in place you can start to catalog items by
53618 <para>Finally you'll want to add the following JQuery to your
53619 preferences so that it will relabel 'Collection' to 'Color'</para>
53621 <para><link linkend="intranetuserjs">IntranetUserJS</link></para>
53623 <programlisting>$(document).ready(function(){
53624 $("#advsearch-tab-ccode a:contains('Collection')").text("Color");
53625 $("#holdings th:contains('Collection')").text("Color");
53626 });</programlisting>
53628 <para><link linkend="opacuserjs">OPACUserJS</link></para>
53630 <programlisting>$(document).ready(function(){
53631 $("#advsearch-tab-ccode a:contains('Collection')").text("Color");
53632 $('#item_ccode').text("Color");
53633 });</programlisting>
53639 <appendix id="siteintegration">
53640 <title>Koha and Your Website</title>
53642 <para>This appendix will include tips for integrating Koha in to your
53643 library website.</para>
53645 <section id="embedsearch">
53646 <title><link linkend="embedsearch">Koha search on your site</link></title>
53648 <para>Often you'll want to add a Koha search box to your library
53649 website. To do so, just copy and paste the following code in to your
53650 library website and update the YOURCATALOG bit with your catalog's URL
53651 and you're set to go.</para>
53653 <para><programlisting>
53654 <form name="searchform" method="get" action="http://YOURCATLOG/cgi-bin/koha/opac-search.pl" id="searchform">
53655 <input id="transl1" name="q" type="text"><p>
53656 <select name="idx" id="masthead_search">
53657 <option value="kw">Keyword</option>
53658 <option value="ti">Title</option>
53659 <option value="au">Author</option>
53660 <option value="su">Subject</option>
53661 <option value="nb">ISBN</option>
53662 <option value="se">Series</option>
53663 <option value="callnum">Call Number</option>
53665 <input value="Search" id="searchsubmit" type="submit">
53666 </p></form>
53667 </programlisting></para>
53671 <appendix id="gpl">
53672 <title><acronym>GNU</acronym> General Public License version 3</title>
53674 <para>Version 3, 29 June 2007</para>
53676 <para>Copyright © 2007 Free Software Foundation, Inc. <ulink url="http://fsf.org/">http://fsf.org/</ulink></para>
53678 <para>Everyone is permitted to copy and distribute verbatim copies of this
53679 license document, but changing it is not allowed.</para>
53681 <bridgehead id="Preamble" renderas="sect1">Preamble</bridgehead>
53683 <para>The <acronym>GNU</acronym> General Public License is a free,
53684 copyleft license for software and other kinds of works.</para>
53686 <para>The licenses for most software and other practical works are
53687 designed to take away your freedom to share and change the works. By
53688 contrast, the <acronym>GNU</acronym> General Public License is intended to
53689 guarantee your freedom to share and change all versions of a program--to
53690 make sure it remains free software for all its users. We, the Free
53691 Software Foundation, use the <acronym>GNU</acronym> General Public License
53692 for most of our software; it applies also to any other work released this
53693 way by its authors. You can apply it to your programs, too.</para>
53695 <para>When we speak of free software, we are referring to freedom, not
53696 price. Our General Public Licenses are designed to make sure that you have
53697 the freedom to distribute copies of free software (and charge for them if
53698 you wish), that you receive source code or can get it if you want it, that
53699 you can change the software or use pieces of it in new free programs, and
53700 that you know you can do these things.</para>
53702 <para>To protect your rights, we need to prevent others from denying you
53703 these rights or asking you to surrender the rights. Therefore, you have
53704 certain responsibilities if you distribute copies of the software, or if
53705 you modify it: responsibilities to respect the freedom of others.</para>
53707 <para>For example, if you distribute copies of such a program, whether
53708 gratis or for a fee, you must pass on to the recipients the same freedoms
53709 that you received. You must make sure that they, too, receive or can get
53710 the source code. And you must show them these terms so they know their
53713 <para>Developers that use the <acronym>GNU</acronym>
53714 <acronym>GPL</acronym> protect your rights with two steps: (1) assert
53715 copyright on the software, and (2) offer you this License giving you legal
53716 permission to copy, distribute and/or modify it.</para>
53718 <para>For the developers' and authors' protection, the
53719 <acronym>GPL</acronym> clearly explains that there is no warranty for this
53720 free software. For both users' and authors' sake, the
53721 <acronym>GPL</acronym> requires that modified versions be marked as
53722 changed, so that their problems will not be attributed erroneously to
53723 authors of previous versions.</para>
53725 <para>Some devices are designed to deny users access to install or run
53726 modified versions of the software inside them, although the manufacturer
53727 can do so. This is fundamentally incompatible with the aim of protecting
53728 users' freedom to change the software. The systematic pattern of such
53729 abuse occurs in the area of products for individuals to use, which is
53730 precisely where it is most unacceptable. Therefore, we have designed this
53731 version of the <acronym>GPL</acronym> to prohibit the practice for those
53732 products. If such problems arise substantially in other domains, we stand
53733 ready to extend this provision to those domains in future versions of the
53734 <acronym>GPL</acronym>, as needed to protect the freedom of users.</para>
53736 <para>Finally, every program is threatened constantly by software patents.
53737 States should not allow patents to restrict development and use of
53738 software on general-purpose computers, but in those that do, we wish to
53739 avoid the special danger that patents applied to a free program could make
53740 it effectively proprietary. To prevent this, the <acronym>GPL</acronym>
53741 assures that patents cannot be used to render the program non-free.</para>
53743 <para>The precise terms and conditions for copying, distribution and
53744 modification follow.</para>
53746 <bridgehead>TERMS AND CONDITIONS</bridgehead>
53748 <bridgehead id="Definitions" renderas="sect1">0. Definitions.</bridgehead>
53750 <para>"This License" refers to version 3 of the <acronym>GNU</acronym>
53751 General Public License.</para>
53753 <para>"Copyright" also means copyright-like laws that apply to other kinds
53754 of works, such as semiconductor masks.</para>
53756 <para>"The Program" refers to any copyrightable work licensed under this
53757 License. Each licensee is addressed as "you". "Licensees" and "recipients"
53758 may be individuals or organizations.</para>
53760 <para>To "modify" a work means to copy from or adapt all or part of the
53761 work in a fashion requiring copyright permission, other than the making of
53762 an exact copy. The resulting work is called a "modified version" of the
53763 earlier work or a work "based on" the earlier work.</para>
53765 <para>A "covered work" means either the unmodified Program or a work based
53766 on the Program.</para>
53768 <para>To "propagate" a work means to do anything with it that, without
53769 permission, would make you directly or secondarily liable for infringement
53770 under applicable copyright law, except executing it on a computer or
53771 modifying a private copy. Propagation includes copying, distribution (with
53772 or without modification), making available to the public, and in some
53773 countries other activities as well.</para>
53775 <para>To "convey" a work means any kind of propagation that enables other
53776 parties to make or receive copies. Mere interaction with a user through a
53777 computer network, with no transfer of a copy, is not conveying.</para>
53779 <para>An interactive user interface displays "Appropriate Legal Notices"
53780 to the extent that it includes a convenient and prominently visible
53781 feature that (1) displays an appropriate copyright notice, and (2) tells
53782 the user that there is no warranty for the work (except to the extent that
53783 warranties are provided), that licensees may convey the work under this
53784 License, and how to view a copy of this License. If the interface presents
53785 a list of user commands or options, such as a menu, a prominent item in
53786 the list meets this criterion.</para>
53788 <bridgehead id="SourceCode" renderas="sect1">1. Source Code.</bridgehead>
53790 <para>The "source code" for a work means the preferred form of the work
53791 for making modifications to it. "Object code" means any non-source form of
53794 <para>A "Standard Interface" means an interface that either is an official
53795 standard defined by a recognized standards body, or, in the case of
53796 interfaces specified for a particular programming language, one that is
53797 widely used among developers working in that language.</para>
53799 <para>The "System Libraries" of an executable work include anything, other
53800 than the work as a whole, that (a) is included in the normal form of
53801 packaging a Major Component, but which is not part of that Major
53802 Component, and (b) serves only to enable use of the work with that Major
53803 Component, or to implement a Standard Interface for which an
53804 implementation is available to the public in source code form. A "Major
53805 Component", in this context, means a major essential component (kernel,
53806 window system, and so on) of the specific operating system (if any) on
53807 which the executable work runs, or a compiler used to produce the work, or
53808 an object code interpreter used to run it.</para>
53810 <para>The "Corresponding Source" for a work in object code form means all
53811 the source code needed to generate, install, and (for an executable work)
53812 run the object code and to modify the work, including scripts to control
53813 those activities. However, it does not include the work's System
53814 Libraries, or general-purpose tools or generally available free programs
53815 which are used unmodified in performing those activities but which are not
53816 part of the work. For example, Corresponding Source includes interface
53817 definition files associated with source files for the work, and the source
53818 code for shared libraries and dynamically linked subprograms that the work
53819 is specifically designed to require, such as by intimate data
53820 communication or control flow between those subprograms and other parts of
53823 <para>The Corresponding Source need not include anything that users can
53824 regenerate automatically from other parts of the Corresponding
53827 <para>The Corresponding Source for a work in source code form is that same
53830 <bridgehead id="BasicPermissions" renderas="sect1">2. Basic
53831 Permissions.</bridgehead>
53833 <para>All rights granted under this License are granted for the term of
53834 copyright on the Program, and are irrevocable provided the stated
53835 conditions are met. This License explicitly affirms your unlimited
53836 permission to run the unmodified Program. The output from running a
53837 covered work is covered by this License only if the output, given its
53838 content, constitutes a covered work. This License acknowledges your rights
53839 of fair use or other equivalent, as provided by copyright law.</para>
53841 <para>You may make, run and propagate covered works that you do not
53842 convey, without conditions so long as your license otherwise remains in
53843 force. You may convey covered works to others for the sole purpose of
53844 having them make modifications exclusively for you, or provide you with
53845 facilities for running those works, provided that you comply with the
53846 terms of this License in conveying all material for which you do not
53847 control copyright. Those thus making or running the covered works for you
53848 must do so exclusively on your behalf, under your direction and control,
53849 on terms that prohibit them from making any copies of your copyrighted
53850 material outside their relationship with you.</para>
53852 <para>Conveying under any other circumstances is permitted solely under
53853 the conditions stated below. Sublicensing is not allowed; section 10 makes
53854 it unnecessary.</para>
53856 <bridgehead id="Protecting" renderas="sect1">3. Protecting Users' Legal
53857 Rights From Anti-Circumvention Law.</bridgehead>
53859 <para>No covered work shall be deemed part of an effective technological
53860 measure under any applicable law fulfilling obligations under article 11
53861 of the WIPO copyright treaty adopted on 20 December 1996, or similar laws
53862 prohibiting or restricting circumvention of such measures.</para>
53864 <para>When you convey a covered work, you waive any legal power to forbid
53865 circumvention of technological measures to the extent such circumvention
53866 is effected by exercising rights under this License with respect to the
53867 covered work, and you disclaim any intention to limit operation or
53868 modification of the work as a means of enforcing, against the work's
53869 users, your or third parties' legal rights to forbid circumvention of
53870 technological measures.</para>
53872 <bridgehead id="ConveyingVerbatim" renderas="sect1">4. Conveying Verbatim
53873 Copies.</bridgehead>
53875 <para>You may convey verbatim copies of the Program's source code as you
53876 receive it, in any medium, provided that you conspicuously and
53877 appropriately publish on each copy an appropriate copyright notice; keep
53878 intact all notices stating that this License and any non-permissive terms
53879 added in accord with section 7 apply to the code; keep intact all notices
53880 of the absence of any warranty; and give all recipients a copy of this
53881 License along with the Program.</para>
53883 <para>You may charge any price or no price for each copy that you convey,
53884 and you may offer support or warranty protection for a fee.</para>
53886 <bridgehead id="ConveyingModified" renderas="sect1">5. Conveying Modified
53887 Source Versions.</bridgehead>
53889 <para>You may convey a work based on the Program, or the modifications to
53890 produce it from the Program, in the form of source code under the terms of
53891 section 4, provided that you also meet all of these conditions:</para>
53893 <orderedlist numeration="loweralpha">
53895 <para>The work must carry prominent notices stating that you modified
53896 it, and giving a relevant date.</para>
53900 <para>The work must carry prominent notices stating that it is
53901 released under this License and any conditions added under section 7.
53902 This requirement modifies the requirement in section 4 to "keep intact
53903 all notices".</para>
53907 <para>You must license the entire work, as a whole, under this License
53908 to anyone who comes into possession of a copy. This License will
53909 therefore apply, along with any applicable section 7 additional terms,
53910 to the whole of the work, and all its parts, regardless of how they
53911 are packaged. This License gives no permission to license the work in
53912 any other way, but it does not invalidate such permission if you have
53913 separately received it.</para>
53917 <para>If the work has interactive user interfaces, each must display
53918 Appropriate Legal Notices; however, if the Program has interactive
53919 interfaces that do not display Appropriate Legal Notices, your work
53920 need not make them do so.</para>
53924 <para>A compilation of a covered work with other separate and independent
53925 works, which are not by their nature extensions of the covered work, and
53926 which are not combined with it such as to form a larger program, in or on
53927 a volume of a storage or distribution medium, is called an "aggregate" if
53928 the compilation and its resulting copyright are not used to limit the
53929 access or legal rights of the compilation's users beyond what the
53930 individual works permit. Inclusion of a covered work in an aggregate does
53931 not cause this License to apply to the other parts of the
53934 <bridgehead id="ConveyingNonSource" renderas="sect1">6. Conveying
53935 Non-Source Forms.</bridgehead>
53937 <para>You may convey a covered work in object code form under the terms of
53938 sections 4 and 5, provided that you also convey the machine-readable
53939 Corresponding Source under the terms of this License, in one of these
53942 <orderedlist numeration="loweralpha">
53944 <para>Convey the object code in, or embodied in, a physical product
53945 (including a physical distribution medium), accompanied by the
53946 Corresponding Source fixed on a durable physical medium customarily
53947 used for software interchange.</para>
53951 <para>Convey the object code in, or embodied in, a physical product
53952 (including a physical distribution medium), accompanied by a written
53953 offer, valid for at least three years and valid for as long as you
53954 offer spare parts or customer support for that product model, to give
53955 anyone who possesses the object code either (1) a copy of the
53956 Corresponding Source for all the software in the product that is
53957 covered by this License, on a durable physical medium customarily used
53958 for software interchange, for a price no more than your reasonable
53959 cost of physically performing this conveying of source, or (2) access
53960 to copy the Corresponding Source from a network server at no
53965 <para>Convey individual copies of the object code with a copy of the
53966 written offer to provide the Corresponding Source. This alternative is
53967 allowed only occasionally and noncommercially, and only if you
53968 received the object code with such an offer, in accord with subsection
53973 <para>Convey the object code by offering access from a designated
53974 place (gratis or for a charge), and offer equivalent access to the
53975 Corresponding Source in the same way through the same place at no
53976 further charge. You need not require recipients to copy the
53977 Corresponding Source along with the object code. If the place to copy
53978 the object code is a network server, the Corresponding Source may be
53979 on a different server (operated by you or a third party) that supports
53980 equivalent copying facilities, provided you maintain clear directions
53981 next to the object code saying where to find the Corresponding Source.
53982 Regardless of what server hosts the Corresponding Source, you remain
53983 obligated to ensure that it is available for as long as needed to
53984 satisfy these requirements.</para>
53988 <para>Convey the object code using peer-to-peer transmission, provided
53989 you inform other peers where the object code and Corresponding Source
53990 of the work are being offered to the general public at no charge under
53991 subsection 6d.</para>
53995 <para>A separable portion of the object code, whose source code is
53996 excluded from the Corresponding Source as a System Library, need not be
53997 included in conveying the object code work.</para>
53999 <para>A "User Product" is either (1) a "consumer product", which means any
54000 tangible personal property which is normally used for personal, family, or
54001 household purposes, or (2) anything designed or sold for incorporation
54002 into a dwelling. In determining whether a product is a consumer product,
54003 doubtful cases shall be resolved in favor of coverage. For a particular
54004 product received by a particular user, "normally used" refers to a typical
54005 or common use of that class of product, regardless of the status of the
54006 particular user or of the way in which the particular user actually uses,
54007 or expects or is expected to use, the product. A product is a consumer
54008 product regardless of whether the product has substantial commercial,
54009 industrial or non-consumer uses, unless such uses represent the only
54010 significant mode of use of the product.</para>
54012 <para>"Installation Information" for a User Product means any methods,
54013 procedures, authorization keys, or other information required to install
54014 and execute modified versions of a covered work in that User Product from
54015 a modified version of its Corresponding Source. The information must
54016 suffice to ensure that the continued functioning of the modified object
54017 code is in no case prevented or interfered with solely because
54018 modification has been made.</para>
54020 <para>If you convey an object code work under this section in, or with, or
54021 specifically for use in, a User Product, and the conveying occurs as part
54022 of a transaction in which the right of possession and use of the User
54023 Product is transferred to the recipient in perpetuity or for a fixed term
54024 (regardless of how the transaction is characterized), the Corresponding
54025 Source conveyed under this section must be accompanied by the Installation
54026 Information. But this requirement does not apply if neither you nor any
54027 third party retains the ability to install modified object code on the
54028 User Product (for example, the work has been installed in
54029 <acronym>ROM</acronym>).</para>
54031 <para>The requirement to provide Installation Information does not include
54032 a requirement to continue to provide support service, warranty, or updates
54033 for a work that has been modified or installed by the recipient, or for
54034 the User Product in which it has been modified or installed. Access to a
54035 network may be denied when the modification itself materially and
54036 adversely affects the operation of the network or violates the rules and
54037 protocols for communication across the network.</para>
54039 <para>Corresponding Source conveyed, and Installation Information
54040 provided, in accord with this section must be in a format that is publicly
54041 documented (and with an implementation available to the public in source
54042 code form), and must require no special password or key for unpacking,
54043 reading or copying.</para>
54045 <bridgehead id="AdditionalTerms" renderas="sect1">7. Additional
54046 Terms.</bridgehead>
54048 <para>"Additional permissions" are terms that supplement the terms of this
54049 License by making exceptions from one or more of its conditions.
54050 Additional permissions that are applicable to the entire Program shall be
54051 treated as though they were included in this License, to the extent that
54052 they are valid under applicable law. If additional permissions apply only
54053 to part of the Program, that part may be used separately under those
54054 permissions, but the entire Program remains governed by this License
54055 without regard to the additional permissions.</para>
54057 <para>When you convey a copy of a covered work, you may at your option
54058 remove any additional permissions from that copy, or from any part of it.
54059 (Additional permissions may be written to require their own removal in
54060 certain cases when you modify the work.) You may place additional
54061 permissions on material, added by you to a covered work, for which you
54062 have or can give appropriate copyright permission.</para>
54064 <para>Notwithstanding any other provision of this License, for material
54065 you add to a covered work, you may (if authorized by the copyright holders
54066 of that material) supplement the terms of this License with terms:</para>
54068 <orderedlist numeration="loweralpha">
54070 <para>Disclaiming warranty or limiting liability differently from the
54071 terms of sections 15 and 16 of this License; or</para>
54075 <para>Requiring preservation of specified reasonable legal notices or
54076 author attributions in that material or in the Appropriate Legal
54077 Notices displayed by works containing it; or</para>
54081 <para>Prohibiting misrepresentation of the origin of that material, or
54082 requiring that modified versions of such material be marked in
54083 reasonable ways as different from the original version; or</para>
54087 <para>Limiting the use for publicity purposes of names of licensors or
54088 authors of the material; or</para>
54092 <para>Declining to grant rights under trademark law for use of some
54093 trade names, trademarks, or service marks; or</para>
54097 <para>Requiring indemnification of licensors and authors of that
54098 material by anyone who conveys the material (or modified versions of
54099 it) with contractual assumptions of liability to the recipient, for
54100 any liability that these contractual assumptions directly impose on
54101 those licensors and authors.</para>
54105 <para>All other non-permissive additional terms are considered "further
54106 restrictions" within the meaning of section 10. If the Program as you
54107 received it, or any part of it, contains a notice stating that it is
54108 governed by this License along with a term that is a further restriction,
54109 you may remove that term. If a license document contains a further
54110 restriction but permits relicensing or conveying under this License, you
54111 may add to a covered work material governed by the terms of that license
54112 document, provided that the further restriction does not survive such
54113 relicensing or conveying.</para>
54115 <para>If you add terms to a covered work in accord with this section, you
54116 must place, in the relevant source files, a statement of the additional
54117 terms that apply to those files, or a notice indicating where to find the
54118 applicable terms.</para>
54120 <para>Additional terms, permissive or non-permissive, may be stated in the
54121 form of a separately written license, or stated as exceptions; the above
54122 requirements apply either way.</para>
54124 <bridgehead id="Termination" renderas="sect1">8. Termination.</bridgehead>
54126 <para>You may not propagate or modify a covered work except as expressly
54127 provided under this License. Any attempt otherwise to propagate or modify
54128 it is void, and will automatically terminate your rights under this
54129 License (including any patent licenses granted under the third paragraph
54130 of section 11).</para>
54132 <para>However, if you cease all violation of this License, then your
54133 license from a particular copyright holder is reinstated (a)
54134 provisionally, unless and until the copyright holder explicitly and
54135 finally terminates your license, and (b) permanently, if the copyright
54136 holder fails to notify you of the violation by some reasonable means prior
54137 to 60 days after the cessation.</para>
54139 <para>Moreover, your license from a particular copyright holder is
54140 reinstated permanently if the copyright holder notifies you of the
54141 violation by some reasonable means, this is the first time you have
54142 received notice of violation of this License (for any work) from that
54143 copyright holder, and you cure the violation prior to 30 days after your
54144 receipt of the notice.</para>
54146 <para>Termination of your rights under this section does not terminate the
54147 licenses of parties who have received copies or rights from you under this
54148 License. If your rights have been terminated and not permanently
54149 reinstated, you do not qualify to receive new licenses for the same
54150 material under section 10.</para>
54152 <bridgehead id="AcceptanceNotRequired" renderas="sect1">9. Acceptance Not
54153 Required for Having Copies.</bridgehead>
54155 <para>You are not required to accept this License in order to receive or
54156 run a copy of the Program. Ancillary propagation of a covered work
54157 occurring solely as a consequence of using peer-to-peer transmission to
54158 receive a copy likewise does not require acceptance. However, nothing
54159 other than this License grants you permission to propagate or modify any
54160 covered work. These actions infringe copyright if you do not accept this
54161 License. Therefore, by modifying or propagating a covered work, you
54162 indicate your acceptance of this License to do so.</para>
54164 <bridgehead id="AutomaticDownstream" renderas="sect1">10. Automatic
54165 Licensing of Downstream Recipients.</bridgehead>
54167 <para>Each time you convey a covered work, the recipient automatically
54168 receives a license from the original licensors, to run, modify and
54169 propagate that work, subject to this License. You are not responsible for
54170 enforcing compliance by third parties with this License.</para>
54172 <para>An "entity transaction" is a transaction transferring control of an
54173 organization, or substantially all assets of one, or subdividing an
54174 organization, or merging organizations. If propagation of a covered work
54175 results from an entity transaction, each party to that transaction who
54176 receives a copy of the work also receives whatever licenses to the work
54177 the party's predecessor in interest had or could give under the previous
54178 paragraph, plus a right to possession of the Corresponding Source of the
54179 work from the predecessor in interest, if the predecessor has it or can
54180 get it with reasonable efforts.</para>
54182 <para>You may not impose any further restrictions on the exercise of the
54183 rights granted or affirmed under this License. For example, you may not
54184 impose a license fee, royalty, or other charge for exercise of rights
54185 granted under this License, and you may not initiate litigation (including
54186 a cross-claim or counterclaim in a lawsuit) alleging that any patent claim
54187 is infringed by making, using, selling, offering for sale, or importing
54188 the Program or any portion of it.</para>
54190 <bridgehead id="Patents" renderas="sect1">11. Patents.</bridgehead>
54192 <para>A "contributor" is a copyright holder who authorizes use under this
54193 License of the Program or a work on which the Program is based. The work
54194 thus licensed is called the contributor's "contributor version".</para>
54196 <para>A contributor's "essential patent claims" are all patent claims
54197 owned or controlled by the contributor, whether already acquired or
54198 hereafter acquired, that would be infringed by some manner, permitted by
54199 this License, of making, using, or selling its contributor version, but do
54200 not include claims that would be infringed only as a consequence of
54201 further modification of the contributor version. For purposes of this
54202 definition, "control" includes the right to grant patent sublicenses in a
54203 manner consistent with the requirements of this License.</para>
54205 <para>Each contributor grants you a non-exclusive, worldwide, royalty-free
54206 patent license under the contributor's essential patent claims, to make,
54207 use, sell, offer for sale, import and otherwise run, modify and propagate
54208 the contents of its contributor version.</para>
54210 <para>In the following three paragraphs, a "patent license" is any express
54211 agreement or commitment, however denominated, not to enforce a patent
54212 (such as an express permission to practice a patent or covenant not to sue
54213 for patent infringement). To "grant" such a patent license to a party
54214 means to make such an agreement or commitment not to enforce a patent
54215 against the party.</para>
54217 <para>If you convey a covered work, knowingly relying on a patent license,
54218 and the Corresponding Source of the work is not available for anyone to
54219 copy, free of charge and under the terms of this License, through a
54220 publicly available network server or other readily accessible means, then
54221 you must either (1) cause the Corresponding Source to be so available, or
54222 (2) arrange to deprive yourself of the benefit of the patent license for
54223 this particular work, or (3) arrange, in a manner consistent with the
54224 requirements of this License, to extend the patent license to downstream
54225 recipients. "Knowingly relying" means you have actual knowledge that, but
54226 for the patent license, your conveying the covered work in a country, or
54227 your recipient's use of the covered work in a country, would infringe one
54228 or more identifiable patents in that country that you have reason to
54229 believe are valid.</para>
54231 <para>If, pursuant to or in connection with a single transaction or
54232 arrangement, you convey, or propagate by procuring conveyance of, a
54233 covered work, and grant a patent license to some of the parties receiving
54234 the covered work authorizing them to use, propagate, modify or convey a
54235 specific copy of the covered work, then the patent license you grant is
54236 automatically extended to all recipients of the covered work and works
54237 based on it.</para>
54239 <para>A patent license is "discriminatory" if it does not include within
54240 the scope of its coverage, prohibits the exercise of, or is conditioned on
54241 the non-exercise of one or more of the rights that are specifically
54242 granted under this License. You may not convey a covered work if you are a
54243 party to an arrangement with a third party that is in the business of
54244 distributing software, under which you make payment to the third party
54245 based on the extent of your activity of conveying the work, and under
54246 which the third party grants, to any of the parties who would receive the
54247 covered work from you, a discriminatory patent license (a) in connection
54248 with copies of the covered work conveyed by you (or copies made from those
54249 copies), or (b) primarily for and in connection with specific products or
54250 compilations that contain the covered work, unless you entered into that
54251 arrangement, or that patent license was granted, prior to 28 March
54254 <para>Nothing in this License shall be construed as excluding or limiting
54255 any implied license or other defenses to infringement that may otherwise
54256 be available to you under applicable patent law.</para>
54258 <bridgehead id="NoSurrender" renderas="sect1">12. No Surrender of Others'
54259 Freedom.</bridgehead>
54261 <para>If conditions are imposed on you (whether by court order, agreement
54262 or otherwise) that contradict the conditions of this License, they do not
54263 excuse you from the conditions of this License. If you cannot convey a
54264 covered work so as to satisfy simultaneously your obligations under this
54265 License and any other pertinent obligations, then as a consequence you may
54266 not convey it at all. For example, if you agree to terms that obligate you
54267 to collect a royalty for further conveying from those to whom you convey
54268 the Program, the only way you could satisfy both those terms and this
54269 License would be to refrain entirely from conveying the Program.</para>
54271 <bridgehead id="UsedWithAGPL" renderas="sect1">13. Use with the
54272 <acronym>GNU</acronym> Affero General Public License.</bridgehead>
54274 <para>Notwithstanding any other provision of this License, you have
54275 permission to link or combine any covered work with a work licensed under
54276 version 3 of the <acronym>GNU</acronym> Affero General Public License into
54277 a single combined work, and to convey the resulting work. The terms of
54278 this License will continue to apply to the part which is the covered work,
54279 but the special requirements of the <acronym>GNU</acronym> Affero General
54280 Public License, section 13, concerning interaction through a network will
54281 apply to the combination as such.</para>
54283 <bridgehead id="RevisedVersions" renderas="sect1">14. Revised Versions of
54284 this License.</bridgehead>
54286 <para>The Free Software Foundation may publish revised and/or new versions
54287 of the <acronym>GNU</acronym> General Public License from time to time.
54288 Such new versions will be similar in spirit to the present version, but
54289 may differ in detail to address new problems or concerns.</para>
54291 <para>Each version is given a distinguishing version number. If the
54292 Program specifies that a certain numbered version of the
54293 <acronym>GNU</acronym> General Public License "or any later version"
54294 applies to it, you have the option of following the terms and conditions
54295 either of that numbered version or of any later version published by the
54296 Free Software Foundation. If the Program does not specify a version number
54297 of the <acronym>GNU</acronym> General Public License, you may choose any
54298 version ever published by the Free Software Foundation.</para>
54300 <para>If the Program specifies that a proxy can decide which future
54301 versions of the <acronym>GNU</acronym> General Public License can be used,
54302 that proxy's public statement of acceptance of a version permanently
54303 authorizes you to choose that version for the Program.</para>
54305 <para>Later license versions may give you additional or different
54306 permissions. However, no additional obligations are imposed on any author
54307 or copyright holder as a result of your choosing to follow a later
54310 <bridgehead id="WarrantyDisclaimer" renderas="sect1">15. Disclaimer of
54311 Warranty.</bridgehead>
54313 <para>THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY
54314 APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT
54315 HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY
54316 OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,
54317 THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
54318 PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM
54319 IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF
54320 ALL NECESSARY SERVICING, REPAIR OR CORRECTION.</para>
54322 <bridgehead id="LiabilityLimitation" renderas="sect1">16. Limitation of
54323 Liability.</bridgehead>
54325 <para>IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN
54326 WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR
54327 CONVEYS THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
54328 INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES
54329 ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT
54330 LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES
54331 SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE
54332 WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN
54333 ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.</para>
54335 <bridgehead id="InterpretationSecs1516" renderas="sect1">17.
54336 Interpretation of Sections 15 and 16.</bridgehead>
54338 <para>If the disclaimer of warranty and limitation of liability provided
54339 above cannot be given local legal effect according to their terms,
54340 reviewing courts shall apply local law that most closely approximates an
54341 absolute waiver of all civil liability in connection with the Program,
54342 unless a warranty or assumption of liability accompanies a copy of the
54343 Program in return for a fee.</para>
54345 <bridgehead>END OF TERMS AND CONDITIONS</bridgehead>
54347 <bridgehead id="HowToApply" renderas="sect1">How to Apply These Terms to
54348 Your New Programs</bridgehead>
54350 <para>If you develop a new program, and you want it to be of the greatest
54351 possible use to the public, the best way to achieve this is to make it
54352 free software which everyone can redistribute and change under these
54355 <para>To do so, attach the following notices to the program. It is safest
54356 to attach them to the start of each source file to most effectively state
54357 the exclusion of warranty; and each file should have at least the
54358 "copyright" line and a pointer to where the full notice is found.</para>
54361 <replaceable>one line to give the program's name and a brief idea of what it does.</replaceable>
54362 Copyright (C) <replaceable>year</replaceable> <replaceable>name of author</replaceable>
54364 This program is free software: you can redistribute it and/or modify
54365 it under the terms of the <acronym>GNU</acronym> General Public License as published by
54366 the Free Software Foundation, either version 3 of the License, or
54367 (at your option) any later version.
54369 This program is distributed in the hope that it will be useful,
54370 but WITHOUT ANY WARRANTY; without even the implied warranty of
54371 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
54372 <acronym>GNU</acronym> General Public License for more details.
54374 You should have received a copy of the <acronym>GNU</acronym> General Public License
54375 along with this program. If not, see <ulink url="http://www.gnu.org/licenses/">http://www.gnu.org/licenses/</ulink>.
54378 <para>Also add information on how to contact you by electronic and paper
54381 <para>If the program does terminal interaction, make it output a short
54382 notice like this when it starts in an interactive mode:</para>
54385 <replaceable>program</replaceable> Copyright (C) <replaceable>year</replaceable> <replaceable>name of author</replaceable>
54386 This program comes with ABSOLUTELY NO WARRANTY; for details type `<literal>show w</literal>'.
54387 This is free software, and you are welcome to redistribute it
54388 under certain conditions; type `<literal>show c</literal>' for details.
54391 <para>The hypothetical commands `<literal>show w</literal>' and
54392 `<literal>show c</literal>' should show the appropriate parts of the
54393 General Public License. Of course, your program's commands might be
54394 different; for a GUI interface, you would use an "about box".</para>
54396 <para>You should also get your employer (if you work as a programmer) or
54397 school, if any, to sign a "copyright disclaimer" for the program, if
54398 necessary. For more information on this, and how to apply and follow the
54399 <acronym>GNU</acronym> <acronym>GPL</acronym>, see <ulink url="http://www.gnu.org/licenses/">http://www.gnu.org/licenses/</ulink>.</para>
54401 <para>The <acronym>GNU</acronym> General Public License does not permit
54402 incorporating your program into proprietary programs. If your program is a
54403 subroutine library, you may consider it more useful to permit linking
54404 proprietary applications with the library. If this is what you want to do,
54405 use the <acronym>GNU</acronym> Lesser General Public License instead of
54406 this License. But first, please read <ulink url="http://www.gnu.org/philosophy/why-not-lgpl.html">http://www.gnu.org/philosophy/why-not-lgpl.html</ulink>.</para>