Mason James [Sun, 31 May 2015 00:51:20 +0000]
Bumping DB version for 3.16.11
Mason James [Sun, 31 May 2015 01:27:58 +0000]
Add release notes for 3.16.11
Bernardo Gonzalez Kriegel [Sat, 30 May 2015 04:31:19 +0000]
Translation updates for Koha 3.16.11 release
Robin Sheat [Tue, 28 Apr 2015 03:19:30 +0000]
Bug 14068: fix preinst for fresh package installs
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Works as expected. Tested both upgrading and on a new install.
Signed-off-by: Mason James <mtj@kohaaloha.com>
Robin Sheat [Fri, 24 Apr 2015 02:48:53 +0000]
Bug 14055: remove symlink that breaks upgrades
Old versions of koha-common would put in a symlink to the system YUI
libraries. This causes upgrade problems, so we look out for that and zap
it if it's there.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Mason James <mtj@kohaaloha.com>
Tomas Cohen Arazi [Mon, 20 Apr 2015 18:39:45 +0000]
Bug 14006: about.pl checks the wrong zebra index mode
When setting zebra_bib_index_mode to grs1 I get two warnings when not applying the patch:
"The <zebra_bib_index_mode> entry is set to grs1. GRS-1 support is now deprecated and will be removed in future releases. Please use DOM instead by setting <zebra_bib_index_mode> to dom (full reindex required)."
"You have set <use_zebra_facets> but the <zebra_bib_index_mode> is not set to dom. Falling back to legacy facet calculation."
When applying the patch a third warning appears in addition to the two previous ones:
"The <zebra_bib_index_mode> entry is set to dom, but your system still appears to be set up for grs1 indexing."
Seems like the patch does what it should to me regarding the configuration mismatch warning.
Signed-off-by: Eivin Giske Skaaren <eskaaren@yahoo.no>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Mason James <mtj@kohaaloha.com>
Aleisha [Wed, 29 Apr 2015 01:56:45 +0000]
Bug 14075: Undefined value creates noisy warns in C4::AuthoritiesMarc
This match sets $sortby (previously undefined value) as an empty string to get rid of the warns.
To test:
1) Go to a URL such as http://localhost:8080/cgi-bin/koha/opac-authorities-home.pl?op=do_search&type=opac&operator=contains&value=a&marclist=any&and_or=and
2) Notice the warns in the error log
3) Apply patch
4) Reload URL
5) Notice page still works but no warns in error log
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
NOTE: I would have done $sortby //= '';
But this works too. :)
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Mason James <mtj@kohaaloha.com>
Tomas Cohen Arazi [Fri, 15 May 2015 18:28:56 +0000]
Bug 14204: (QA followup) remove unneeded messages
TEST PLAN
---------
1) Apply first patch
2) prove -v t/db_dependent/Labels/t_Batch.t
-- YUCK! No meaningful messages on a lot of the ok's.
3) Apply this patch
4) prove -v t/db_dependent/Labels/t_Batch.t
-- YAY! Meaningful test results
5) koha qa test tools
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Mason James <mtj@kohaaloha.com>
Nick Clemens [Thu, 14 May 2015 19:56:43 +0000]
Bug 14204: Fix t/db_dependent/Labels/t_Batch.t failing test from Bug 12991
This patch updaes the batch_id variable after items are added to test batch
To test:
1. prove t/db_dependent/Labels/t_Batch.t and see two tests fail
2. apply patch
3. prove again, tests pass!
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
NOTE: The $batch->add_item() call to C4::Creators::Batch::add_item
triggers the change of the batch_id so this line is necessary!
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Mason James <mtj@kohaaloha.com>
Mason James [Mon, 30 Mar 2015 06:33:45 +0000]
Bug 13109 - Serial failure for received and general viewing.
to test...
1/ attempt to view a subscription-detail that has a NULL value for either it's 'startdate' or 'enddate'
an example url would be...
http://koha-admin.foo.org/cgi-bin/koha/serials/subscription-detail.pl?subscriptionid=1
observe error...
'Date::Calc::PP::Delta_Days(): Usage: Date::Calc::Delta_Days($year1,$month1,$day1,$year2,$month2,$day2) at /your/koha/C4/Serials.pm line 2325'
2/ apply patch
3/ repeat step 1/
observe that detail page displays OK
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
I confirm the issue if startdate is null (can exist with old data,
before the js check on the form).
Amended patch: Remove trailing space char and the link to the bz number
(can be found using git log).
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Mason James <mtj@kohaaloha.com>
Kyle M Hall [Fri, 25 Jul 2014 13:12:36 +0000]
Bug 12445 [QA Followup] - Clear issues table before clearing borrrowers table
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
All tests pass, even more now than before.
Signed-off-by: Mason James <mtj@kohaaloha.com>
Yohann Dufour [Thu, 19 Jun 2014 14:32:05 +0000]
Bug 12445: ading unit tests to test the routines : CountSuggestion, ConnectSuggestionAndBiblio, SearchSuggestion, GetSuggestionInfo, DelSuggestion, GetSuggestionByStatus
These routines were not tested
Test plan:
1/ Execute the command : prove t/db_dependent/Suggestions.t
2/ The result has to be a success without error or warning :
t/db_dependent/Suggestions.t .. ok
All tests successful.
Files=1, Tests=89, 1 wallclock secs ( 0.05 usr 0.01 sys + 1.52 cusr 0.08 csys = 1.66 CPU)
Result: PASS
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Test pass, no koha-qa errors
But now there are 91!
prove t/db_dependent/Suggestions.t
t/db_dependent/Suggestions.t .. ok
All tests successful.
Files=1, Tests=91, 2 wallclock secs ( 0.05 usr 0.00 sys + 1.77 cusr 0.10 csys = 1.92 CPU)
Result: PASS
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Mason James <mtj@kohaaloha.com>
Yohann Dufour [Thu, 19 Jun 2014 07:14:24 +0000]
Bug 12445: Improving unit tests for C4::Suggestions.pm
Now, the tests used 'is' instead of 'ok', the tests are wrapped in a transaction, adding tests for the routines NewSuggestion, GetSuggestion, ModSuggestion, GetSuggestionFromBiblionumber and GetInfoFromBiblionumber.
The tests for the routines DelSuggestionsOlderThan, CountSuggestion, ConnectSuggestionAndBiblio, SearchSuggestion, GetSuggestionInfo, DelSuggestion and GetSuggestionByStatus will be arrived in another patch.
Test plan:
1/ Execute the command : prove t/db_dependent/Suggestions.t
2/ The result has to be a success without warning or error :
t/db_dependent/Suggestions.t .. ok
All tests successful.
Files=1, Tests=32, 2 wallclock secs ( 0.03 usr 0.01 sys + 1.49 cusr 0.08 csys = 1.61 CPU)
Result: PASS
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Mason James <mtj@kohaaloha.com>
Robin Sheat [Tue, 24 Feb 2015 05:32:30 +0000]
Bug 13645: dependencies for libdbix-connector-perl
Kyle M Hall [Fri, 20 Feb 2015 14:54:35 +0000]
Bug 13645 [QA Followup] - Add DBIx::Connector to the list of dependancies
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan Druart [Tue, 10 Feb 2015 09:47:05 +0000]
Bug 13645: Use DBIx::Connector
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Mason James <mtj@kohaaloha.com>
Jonathan Druart [Fri, 30 Jan 2015 16:10:54 +0000]
Bug 13645: Cache the DBIx connection
We don't want to recreate a new connection to the DB every time we want
a new schema.
This patch creates a $database package level variable on the same way
it's done in C4::Context for $dbh.
Signed-off-by: Jacek Ablewicz <abl@biblos.pk.edu.pl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Mason James <mtj@kohaaloha.com>
Mason James [Fri, 29 May 2015 05:37:32 +0000]
Bug 7904: 3.16.x followup
revert failling verify_cksum() test
Signed-off-by: Mason James <mtj@kohaaloha.com>
modified: t/SIP_Sip.t
Tomas Cohen Arazi [Thu, 5 Feb 2015 18:50:30 +0000]
Bug 7904: (QA followup) fix tests
The package name for SIP wasn't fixed in the tests by the original patches.
This patch fixes it.
To test:
- Run
$ prove t/db_dependent/SIP_ILS.t
- Tests should pass with the patch.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Colin Campbell [Thu, 30 Oct 2014 15:36:09 +0000]
Bug 7904 Change SIP modules to use standard LIB path
For historical reasons the SIPServer and SIP modules
have used an extra module path in addition to the
standard Koha one. This has caused numerous irritants
in attempting to set up scripts and basic tests. It
does not help in attempting to modify or debug
this code
This patch changes the package value in the modules
under the C4/SIP directory and makes calls to
them use the full package name.
Where the export mechanism was being short circuited
routines have been explicitly exported and imported
declarations of 'use ILS' when that module was
not being used and which only generated warnings
have been removed.
As a lot of the changes affect lines where
an object is instantiated with new. The opportunity
has been taken to replace the ambiguous indirect
syntax with the preferred direct call
In intializing ILS the full path is added as this
will not require any changes to existing configs.
I suspect this feature is unused, and adds
obfuscation rather than flexibility but have kept
the feature as we need this change in order to
rationalize and extend the testing of the server.
The visible difference is that with the normal Koha
PERL5LIB setting. Compilation of Modules under C4/SIP
should be successful and not fail with unlocated modules,
allowing developers to see any perl warnings
All the SIP modules can now be run through the tests
in t/00-load.t now except for SIPServer itself
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Mason James <mtj@kohaaloha.com>
Robin Sheat [Sun, 9 Nov 2014 22:38:29 +0000]
Bug 7904 - remove unnecessary path from SIP script
With the fixing of the namespace in the SIP code, we don't need to
modify the PERL5LIB to have the old one.
To test:
* do a package install using this and the other patches on bug 7904
* enable SIP
* make sure koha-start-sip and koha-stop-sip work
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Mason James <mtj@kohaaloha.com>
Robin Sheat [Tue, 14 Apr 2015 03:28:46 +0000]
Bug 13979: [3.16.x] updates to allow installation on jessie
This patch makes the build script keep the shipped YUI JavaScript library
instead of explicitly deleting it and using the one the operating system
provides.
Development is done against the YUI library we ship, so this makes sense
even if Debian still shipped it.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Mason James <mtj@kohaaloha.com>
Mason James [Thu, 23 Apr 2015 07:17:30 +0000]
Bumping version number for 3.16.10 release
Signed-off-by: Mason James <mtj@kohaaloha.com>
Mason James [Thu, 23 Apr 2015 05:26:45 +0000]
Release notes for 3.16.10
Signed-off-by: Mason James <mtj@kohaaloha.com>
Kyle M Hall [Fri, 20 Mar 2015 13:09:45 +0000]
Bug 12820 [QA Followup] - Tab and whitespace cleanup
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Colin Campbell [Tue, 10 Feb 2015 17:22:43 +0000]
Bug 12820: Handle rental fees in Sip issue and renew
Implement correct handling of fees associated with checking out
an item.
This is associated with fee acknowledged field (BO)
To quote from the Sip2 document
" If this field is N in a Checkout message and there is a fee
associated with checking out the item, the ACS should tell the
SC in the Checkout Response that there is a fee, and refuse to
check out the item. If the SC and the patron then interact and the
patron agrees to pay the fee, this field will be set to Y on a second
Checkout message, indicating to the ACS that the patron has acknowledged
the fee and checkout of the item should not be refused just
because there is a fee associated with the item"
So there are two Checkout requests the first with BO not set to Y is
rejected but the fee amount is returned. The Second Checkout with BO set
to Y should succeed.
Added a debug log message indicating why we block a checkout
when we dont otherwise indicate
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Mason James [Thu, 23 Apr 2015 04:20:21 +0000]
Bug 13746: Add tests (follow-up)
increase tests to 48, so t/db_dependent/Serials.t passes clean
Signed-off-by: Mason James <mtj@kohaaloha.com>
Jonathan Druart [Wed, 25 Feb 2015 12:21:07 +0000]
Bug 13746: Add tests
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Katrin Fischer [Sat, 21 Feb 2015 21:52:30 +0000]
Bug 13746: On creating a new subscription, notes fields get confused
For every subscription we have 4 notes fields in Koha, 2 are in the
subscription itself and another 2 are in the subscription history.
When creating a new subscription, the notes fields from the
subscription get copied to the fields of the subscription history,
leading to doubled up display of notes in the OPAC.
To test:
- Add a new subscription without patch
- check manual history
- Fill in both notes fields
- Verify that the notes fields got also saved into the
subscription history (easy from the Summary tab)
- Apply patch
- Add another subscription, like above
- Verify now only the subscription notes fields are saved
- Edit subscription and notes - verify all is ok
- Edit subscription history (Planning tab) - verify all is ok
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Katrin Fischer [Sat, 21 Feb 2015 19:40:31 +0000]
Bug 13744: Fix datatables paging on 'Holds to pull' report
The paging of the datatables on the 'holds to pull' report
page is broken without this patch.
To test:
- Make sure that some holds are placed on available items
in your installation
- Go to the circulation start page
- Open the 'holds to pull' report
- Verify that the patch fixes the paging on the result table
Also: Fixes "None" in the filter pull downs to be translatable.
Signed-off-by: Nicole <nicole@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Katrin Fischer [Sun, 22 Feb 2015 10:10:59 +0000]
Bug 13744: Fix datatables paging on 'checkout history' page
The paging in the datatable on the 'circulation history' page
is broken without this patch.
/cgi-bin/koha/catalogue/issuehistory.pl?biblionumber=...
To test:
- Search for a record with items that have been checked out
in the past
- From the detail page, open the 'checkout history' tab
- Check paging displays correctly with this patch and is
broken without
Signed-off-by: Nicole <nicole@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Katrin Fischer [Sat, 21 Feb 2015 19:30:07 +0000]
Bug 13744: Fix datatables paging on 'order from subscription' page
The paging of the datatable on the 'order from subscription' page
is broken without this patch.
To test:
- Make sure you have a subscription, note the vendor
- Create a new basket for this vendor
- Add a new order line 'from a subscription'
- Check paging on the result table displays correctly
Signed-off-by: Nicole <nicole@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Fridolin Somers [Tue, 29 Jul 2014 06:57:54 +0000]
Bug 11331 - CSV export for viewlog.pl is missing newlines - followup
Perl formatting and cleaning.
Also corrects the HTML of results table in viewlog.tt.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Mason James <mtj@kohaaloha.com>
Fridolin Somers [Fri, 25 Jul 2014 15:01:42 +0000]
Bug 11331 - CSV export for viewlog.pl is missing newlines
When you try to export the result of tools/viewlog.pl in csv, file
cannot be correctly loaded :
- newline is missing after each record,
- strings should be enclosed in ""
- columns are not the same as for screen output
This patch corrects this by using like other export Text::CSV.
Adds a header line made with the keys of first data. For that, all data
values are initialiszed with empty string.
Test plan :
- Use a database with some logs, see sysprefs
/cgi-bin/koha/admin/preferences.pl?tab=logs
- Go to export page /cgi-bin/koha/tools/viewlog.pl
- Select a module
- Click on "To a file" and choose a file name
- Click on "Submit"
- Open file
=> Without this patch : newline is missing, multi-lines cells are not
enclosed in "", there are no column headings
=> Without this patch : each line is a data line, complexe cells are
enclosed in "", there are column headings
- Test the export of all modules to see that all headings are necessary
- Check the output to screen in the browser
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
The CSV export is significantly improved. I question the usefulness of
including biblioitemnumber in the output. A better inclusion would be
itemnumber.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
While this feature is still not perfect, this is a big improvement.
Passes tests and QA script, restores basic functionality.
Signed-off-by: Mason James <mtj@kohaaloha.com>
Benjamin Rokseth [Tue, 22 Apr 2014 12:09:16 +0000]
Bug 12122: TransferSlip should accept both itemnumber and barcode
Added small patch to allow barcode as input in TransferSlip routine, mostly
to allow generating transfer slips where only barcode is present (aka.
javascript).
Test plan:
1) find book with <barcode> and <itemnumber>
2) generate transferslips with both:
transfer-slip.pl?transferitem=<itemnumber>3967925&branchcode=MPL&op=slip
transfer-slip.pl?barcode=<barcode>&branchcode=MPL&op=slip
and verify that the generated slips match.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Edit:
- Added tests in t/db_dependent/Circulation_transfers.t
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Passes tests and QA script.
Works with both itemnumber or barcode as described.
Tested printing transfer slips with the URL examples given
and in the UI.
Frédéric Demians [Mon, 12 Jan 2015 11:18:19 +0000]
Bug 13568 OAI Server doesn't handle properly resumption token
When responding to ListRecords and ListIdentifiers verbs, OAI server doesn't
return proper resumption token. At the end of a result set, OAI server
generates a resumption token even if there isn't anymore records. Consequently,
OAI harverster will send a new request, based on this invalid resumption,
token. OAI Server responds with an empty resultset, which is considered as an
invalid response by most of the harvesters.
TO TEST:
- Find in your DB, a day where a few biblio records have been created. The
number of created biblios must inferior to OAI-PMH:MaxCount.
- Let say this day is 2014-01-09. Send an OAI-PMH request to Koha OAI Server:
/cgi-bin/koha/oai.pl?verb=ListRecords&metadataPrefix=marcxml&from=2014-01-09&until=2014-01-09
- At the end of the result, you will see a resumption token which looks like that:
<resumptionToken cursor="47">marcxml/47/2014-01-09/2014-01-09/</resumptionToken>
This is wrong. No resumptiion token should be sent since there isn't anymore
records to harvest.
- Apply the patch.
- Resend the OAI-PMH request. There is no resumption token at the end of the
result.
- You could test also with ListIdenfiers verb in place of ListRecord.
Signed-off-by: Christophe Brocquet <christophe.brocquet@obspm.fr>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Kyle M Hall [Wed, 28 Jan 2015 13:31:30 +0000]
Bug 13636 - Staff search results item status incorrect for holds
Imagine this scenario: we have one record with four items. Two of those
items are checked out, one of those items is a waiting hold, and one of
those items is available. We would expect to see this on the search
results page. Instead, we will see both non-checked out items as
unavailable due to waiting holds.
This is due to a semantic issue GetReserveStatus.
C4::Search::searchResults uses GetReserveStatus to get the reserve
status of each item, but unlike all other calls to the sub, this one
passes in not only itemnumber, but biblionumber.
When no reserve is found for the available item, the subroutine uses the
biblionumber to grab what is essentially an arbitrary reserve to use for
the status. This makes no sense and this functionality should be
entirely removed from the subroutine so regressions like this will be
prevented in the future.
Test Plan:
1) Create one record with 4 items
a) check two of the items out to patrons
b) set one of the items as a waiting hold
c) leave the fourth item as available
2) Run a search where this record will be in the results list
3) Note that the results list 2 items on loan, two unavailable
4) Apply this patch, reload the search results
5) Note that the results list 1 available, 2 on loan, 1 unavailable
Signed-off-by: John Andrews <jandrews@washoecounty.us>
Signed-off-by: Sheila Kearns <sheila.kearns@state.vt.us>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Note: This is for the staff search result list!
Works as expected.
Kyle M Hall [Wed, 19 Nov 2014 13:16:17 +0000]
Bug 13298 - Holds ratios report ignores ordered items
The holds ratio report ignores ordered items. This could cause a library
to inadvertently order more copies of a title than they actually need.
An option should be added to count ordered items ( i.e. any negative
notforloan value ).
Test Plan:
1) Apply this patch
2) Create a record with two items, one regular, one ordered.
3) Place 3 holds on the item
4) Run the reserve ratios report, by default you should see this record
5) Check the new 'include ordered' checkbox, rerun the report
6) Note that record is no longer displayed
Signed-off-by: Heather Braum <hbraum@nekls.org>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Jonathan Druart [Mon, 17 Nov 2014 16:17:49 +0000]
Bug 13270: Don't display "vendor note" label if nothing to display
Bug 12111 removes the vendor note edition on receiving.
The label should not be displayed when it's empty.
Test plan:
1/ Receive an order without a vendor note and verify that the label is not
displayed.
2/ Receive an order with a vendor note and verify that the note is
displayed.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Works as described, small template change.
Jonathan Druart [Thu, 11 Dec 2014 08:50:38 +0000]
Bug 13268: the size should not be emptied in pl script
It duplicates what the first patch does.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Fridolin Somers [Mon, 17 Nov 2014 15:32:20 +0000]
Bug 13268 - biblioitems.size value not correctly displayed (more)
Bug partially corrected by Bug 11357.
The size column in biblioitems is a bit problematic when used in TT, because instead of the size value from the biblio column it will give you the size of the variable or current loop.
It's currently used in the templates like opac-topissues.tt :
[% IF results_loo.size %][% results_loo.size %][% END %]
This patch corrects by using item() TT method.
See http://stackoverflow.com/questions/2311303/how-can-i-handle-hash-keys-containing-illegal-identifier-characters-in-template.
Test plan :
- Be sure there is a mapping between a MARC field and biblioitems.size
- Create a record A with biblioitems.size defined : like "10x12"
- Create a record B with no value in biblioitems.size
- Check each modified page :
=> Without this patch : you see a number (loop size) for both records
=> With this patch : you only see the correct value for A and nothing for B
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Fridolin Somers [Thu, 19 Jun 2014 12:47:15 +0000]
Bug 11357 - biblioitems.size value not correctly displayed in list emails sent from OPAC and intranet
The size column in biblioitems is a bit problematic when used in TT, because instead of the size value from the biblio column it will give you the size of the variable.
It's currently used in the templates for sending shelves from OPAC and intranet and maybe also in other places:
[% END %]
[% IF BIBLIO_RESULT.size %]
, [% BIBLIO_RESULT.size %]
[% END %]
This patch corrects by using item() TT method.
See http://stackoverflow.com/questions/2311303/how-can-i-handle-hash-keys-containing-illegal-identifier-characters-in-template.
Test plan :
In each display :
=> Without this patch you see biblioitems.pages and then a number
=> With this patch you only see biblioitems.pages
- Create a record with biblioitems.pages defined (like "12p") but without biblioitems.size defined
Same for OPAC and intranet :
- Add it to the cart
- Open the cart
- Check the "Title" column
- Click on "More Details"
- Check the "Details" row
- Send the basket via email and check the result
- Add to a list
- Send the list via email and check the result
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Works well!!
Tested on staff & opac, cart & list.
No koha-qa errors
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes QA script and tests.
Mason James [Thu, 9 Apr 2015 03:33:02 +0000]
Bug 12954: Failed login should retain anonymous session (3.16.x)
A failed login should not leave the user in a half logged authenticated
state, but rather return them to an anonymouse session as per the
pre-login attempt state.
To replicate error:
1. Try to log in with some nonexisting user id or wrong password in the
OPAC
2. Go directly to /opac-user.pl (e.g., enter it in the browser address
bar, or just click on the "Log in" link)
3. Observe a DBI error displayed on the screen
4. You are now in the "deadloop" of sorts (opac/opac-user.pl refuses to
display the login screen, no matter how many times you try to reload
it); to break the deadloop, one needs to:
- remove session cookie from the browser (or cause the session to
expire in some other way - closing browser window would be probably
enough for that)
- remove offending session on the server (from mysql sessions table,
..)
- log in with proper credentials using some other page (like
opac/opac-main.pl right-side panel), which does not involve
opac/opac-user.pl being called without "userid" CGI parameter.
To test:
1. Test as above, the DBI error should no longer be present
2. Check that search history works across failed and sucessful login
attempts
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Mason James <mtj@kohaaloha.com>
Martin Renvoize [Tue, 6 Jan 2015 06:54:00 +0000]
Bug 13521: Add missing semicolon
Add a missing semicolon to the end of a template variable assignment
line. This patch should not affect operation.
Note: With Bug 13499 we did a non-destructive perltidy, as such we only
affected indenting and whitespace to maintain blame history. However, a
number of minor code issues were also highlighted, in this series of
patches I hope to correct other minor style issues.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Mason James <mtj@kohaaloha.com>
Martin Renvoize [Tue, 6 Jan 2015 06:48:29 +0000]
Bug 13521: Removed superflous semicolon
Removed an uneeded semicolon from the end of an 'if' block. This should
not affect operation of the script.
Note: With Bug 13499 we did a non-destructive perltidy, as such we only
affected indenting and whitespace to maintain blame history. However, a
number of minor code issues were also highlighted, in this series of
patches I hope to correct other minor style issues.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Mason James <mtj@kohaaloha.com>
Kyle M Hall [Thu, 31 Jul 2014 15:28:44 +0000]
Bug 12507 - News does not always display in staff or OPAC
News will not display on the last day of each month due to the
way the date is calculated in the SQL code for grabbing news.
Test Plan:
1) Create a news item that should display
2) Change your server's date to the last day of the month
3) Note you can no longer see that news item
4) Apply this patch
5) Note you can now see your news item again
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Mason James <mtj@kohaaloha.com>
Mason James [Sun, 29 Mar 2015 22:51:48 +0000]
Add HTML notes
Mason James [Sun, 29 Mar 2015 22:09:19 +0000]
Release notes
Mason James [Sun, 29 Mar 2015 21:41:54 +0000]
Increment DB revision for 3.16.9 release
Katrin Fischer [Thu, 5 Mar 2015 08:36:48 +0000]
Bug 12399: Small change to remove the whole paging
Previous patch only removed the next and previous buttons.
This patch changes it a bit to remove the whole paging from
the print view of the page.
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Marc Véron [Sat, 31 Jan 2015 16:41:08 +0000]
Bug 12399 - opaccredits printing at top on printable version
This patch introduces a new class "noprint" in koha-tmpl/opac-tmpl/bootstrap/css/print.css
With this class, unwanted elements can be hidden when printing.
To test:
In OPAC, do a search with many results (> 1 Page)
Print page or do a print preview
See that footer elements are not displayed correctly (as of screenshot in comment #1) and that on top of page 2 the language selector overlays the list
Apply patch
Repeat steps above.
Verify that printed page looks much nicer now by hiding unwanted elements (including e.g. RSS icon, toolbar etc.)
This mechanism can be used on other pages as well.
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Mason James <mtj@kohaaloha.com>
Jonathan Druart [Mon, 16 Feb 2015 15:33:16 +0000]
Bug 13586: Remove some other occurrences
Signed-off-by: Larry Baerveldt <larry@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Mason James <mtj@kohaaloha.com>
Jonathan Druart [Mon, 16 Feb 2015 15:28:51 +0000]
Bug 13586: Remove the entire block
Previous patch remove the condition but not the block tested.
The entire block should be removed.
Signed-off-by: Larry Baerveldt <larry@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Mason James <mtj@kohaaloha.com>
Rochelle [Thu, 15 Jan 2015 20:51:43 +0000]
Bug 13586: Makefile.PL mentions win32
Edited Makefile.PL to remove mentions of win32
To test: Run Makefile.PL
Signed-off-by: Larry Baerveldt <larry@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Mason James <mtj@kohaaloha.com>
Katrin Fischer [Tue, 17 Mar 2015 23:01:29 +0000]
Bug 13858: Datatables paging on Koha news tool page slightly broken
The paging is slightly broken in the datatables table on the
news page in the tools module.
To test:
- Access the tools > news page
- Make sure you have a few news entries
- Check that the paging is broken without the patch and
fixed once the patch is applied
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Mason James <mtj@kohaaloha.com>
Tomas Cohen Arazi [Sun, 15 Mar 2015 12:03:33 +0000]
Bug 13814: (QA followup) test for generated warnings
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Mason James <mtj@kohaaloha.com>
Julian FIOL [Tue, 10 Mar 2015 16:10:58 +0000]
Bug 13814 : Add Lines Alignment
Signed-off-by: Marc Veron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Mason James <mtj@kohaaloha.com>
Julian FIOL [Mon, 9 Mar 2015 16:21:17 +0000]
Bug 13814 : add 6 unit tests in t/Boolean.t
Works as expected.
Signed-off-by: Marc Veron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Mason James <mtj@kohaaloha.com>
Katrin Fischer [Sun, 8 Feb 2015 20:57:26 +0000]
Bug 13648: OPAC = hidden removes pull down from edit item form
If you uncheck the checkbox OPAC in the bibliographic framework
definition for an item subfield that is linked to an authorized
value list, the pull down will disappear from the item edit
form on staff. The label still shows.
1) Go to administration > bibliographic frameworks
2) Select a framework and go to the item field (MARC21: 952)
3) Edit a subfield with an authorized values list like damaged,
lost or withdrawn
4) Uncheck the checkbox for OPAC visibility
5) Edit or add an item within your chosen framework
6) Verify the subfield code and description are shown, but the
pull down has disappeared
7) Apply patch, verify the pull down shows now
8) Also test following hidden combination works correctly:
OPAC: checked
All other options: unchecked
Documentation of hidden values:
http://wiki.koha-community.org/wiki/Hidden_values
With special thanks to Jonathan Druart for helping me figure this out!
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Mason James <mtj@kohaaloha.com>
Jonathan Druart [Wed, 14 Jan 2015 11:03:10 +0000]
Bug 13578: Make sure the 'public' parameter is passed to the last step
If no caching system is up ($usecache == 0), the public parameter is
lost on the step 3.
The hash passed to the template looks like:
'cache_expiry', 300,
'cache_expiry_units',
'public', 1
So the template receives cache_expiry = 300, cache_expiry_units =
'public' and 1 = undef.
This patch fixes the problem passing the cache_expiry* parameters only
if the usecache is set.
Test plan:
0/ Disable any caching system
1/ Create a new public report and go up to the 6th step, save the report
and verify the report is created as public
2/ Enable a caching system
2/ Create a public report with a cache expiry value, save it and verify
the report is created as public and the cache expiry value is correct.
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described.
Signed-off-by: Mason James <mtj@kohaaloha.com>
Tomas Cohen Arazi [Sat, 7 Mar 2015 21:22:53 +0000]
Bug 13785: (QA followup) koha-disable should stop the indexer daemon
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Mason James <mtj@kohaaloha.com>
Larry Baerveldt [Tue, 3 Mar 2015 15:33:21 +0000]
Bug 13785: koha-disable should also stop SIP and zebra for instance
Currently koha-disable ONLY disables the instance in the apache conf
file. Presumably if you want to disable the instance, you also want
its processes to stop, so this patch will stop zebra, if running,
and SIP, if enabled.
Depends on Bug 13784.
To Test:
1) Have an enabled instance, with zebra and SIP running.
2) Run koha-disable INST. Note that after, both zebra and SIP
will still be running.
3) Re-enable INST.
4) Apply patch, and then copy debian/scripts/koha-disable to
package site, over /usr/sbin/koha-disable.
5) Run koha-disable INST. You should now see that both zebra
and SIP have been stopped.
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Robin Sheat <robin@catalyst.net.nz>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Mason James <mtj@kohaaloha.com>
Pasi Kallinen [Tue, 6 May 2014 08:20:59 +0000]
Bug 11364: Label layout types and text justification types are not translatable
To test:
1) cd misc/translator
2) perl translate update xx-YY
3) check that there's no msgids that contain the layout types or
text justification types in po/xx-YY-i-staff-t-prog-v-3006000.po
4) apply patch
5) perl translate update xx-YY
6) check po/xx-YY-i-staff-t-prog-v-3006000.po that it contains the
msgid for the frequencies. (search for "BLOCK translate_label_types"
and "BLOCK translate_justification_types")
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Mason James <mtj@kohaaloha.com>
Kyle M Hall [Fri, 6 Mar 2015 10:08:41 +0000]
Bug 13804 - Returns via the checkouts tables uses the phrase "Returned" rather than "Checked in"
Test plan:
1) Apply this patch
2) Return an item via the checkouts table
3) Note the left most column now reads "Checked in" rather than "Returned"
Followed test plan. Works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Mason James <mtj@kohaaloha.com>
Matthias Meusburger [Mon, 23 Jun 2014 14:51:00 +0000]
Bug 12631: Inventory: fix "wrong place" and "item not scanned"
"item not scanned": when calling GetItemsForInventory, datelastseen should
be used when "compare barcodes list to result" is checked.
Otherwise, when loading multiple barcodes files for the same inventory, many
items will be marked as "item not scanned" when loading the last barcode file
("compare barcodes list to result" checked) even though they were scanned.
"wrong place": when searching for wrongly placed items, we should only check
for the location (callnumbers, location and branch). To fix this, A new call
to GetItemsForInventory has been made with location filters only.
Otherwise, any item with a different itemtype for instance will be marked as
wrong place even if the location is correct.
Test plan:
"item not scanned" status:
1) Split a barcode file in two.
2) Load the first barcode file without checking "compare barcodes list to result".
3) Load the second barcode file with "compare barcodes list to result" checked.
4) Check in the csv report that you have a lot of scanned items with the "item
not scanned" status.
Then apply the patch, do the same, and check that the false "item not scanned"
statuses are gone.
"wrong place" status:
1) Load a barcode file with barcode matching an item that has a correct
location, but a different itemtype than what you're looking for.
2) Check in the results that this item will be marked as "change item status"
and "wrong place".
Then apply the patch, do the same, and check that the only status for this item is "change item status", which is correct.
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Mason James <mtj@kohaaloha.com>
Jonathan Druart [Wed, 25 Feb 2015 11:24:20 +0000]
Bug 13750: Fix capitalization All vs ALL
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Mason James <mtj@kohaaloha.com>
Katrin Fischer [Sun, 22 Feb 2015 10:50:21 +0000]
Bug 13750: Holds queue - Show branch name instead of branch code
When the holds queue report is limited to one library, it shows
<cound> items found for <branchcode>
With the patch applied, the branch name is shown instead of the code.
To test:
- Go to circulation > Holds queue
- Limit to one branch with holds waiting to be processed
- Confirm the string has changed to show the branch name
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Mason James <mtj@kohaaloha.com>
Tomas Cohen Arazi [Sat, 7 Mar 2015 20:35:36 +0000]
Bug 13784: (QA followup) allow running Zebra for disabled instances on packages
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Mason James <mtj@kohaaloha.com>
Larry Baerveldt [Tue, 3 Mar 2015 13:49:57 +0000]
Bug 13784: koha-stop-zebra should also work for disabled instances
Currently koha-stop-zebra will not stop zebra for disabled instances. It should
work more like koha-stop-sip, which does work for disabled instances. Also,
koha-stop-zebra is called by '/etc/init.d/koha-common stop' which clearly
should also apply to disabled instances.
To Test:
1) Disable a koha instance.
2) Run koha-stop-zebra INSTANCE. You should get message
"Instance INSTANCE disabled. No action taken."
3) Apply patch, and copy patched file debian/scripts/koha-stop-zebra
to package site over /usr/sbin/koha-stop-zebra.
4) Disable koha instance.
5) Run koha-stop-zebra INSTANCE. It should now stop zebra.
http://bugs.koha-community.org/show_bug.cgi?id=13784
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Robin Sheat <robin@catalyst.net.nz>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Mason James <mtj@kohaaloha.com>
Jonathan Druart [Wed, 28 Jan 2015 12:03:31 +0000]
Bug 13635: Unimarc - On editing a notice, the title should be displayed
The title method of MARC::Record does not deal with UNIMARC, it should
not be called if the marc flavour is UNIMARC.
Test plan:
On an unimarc installation, edit a notice, with this patch you should
see
"Editing TITLE (Record number BIBLIONUMBER)"
Without, the title was not displayed.
Same in the breadcrumbs.
Bug 13635: Remove another useless call
There is another call to the title method in additem.pl without any
check on the marc flavour.
But here the title variable sent to the template is redefined 3 lines
later.
So it can be simply removed.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Tested on UNIMARC install, editing a 'record' (not notice) does not show
title on breadcrumbs, status bar or page title.
With patch it does!
No koha-qa errors.
Signed-off-by: joel aloi <aloi54@live.fr>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Mason James <mtj@kohaaloha.com>
Fridolin Somers [Wed, 21 Jan 2015 09:22:19 +0000]
Bug 13605 - _AUTHOR_ not replaced in relatives checkouts
In members/moremember.pl, in relatives checkouts tab, "by _AUTHOR_" appears before author.
This code sould be replaced in JS.
Test plan :
- Go to a borrower with relative's checkouts
=> without patch : you see "by _AUTHOR_" string before author name
=> with patch : you see "by" string before author name
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, fixes the problem.
Signed-off-by: Mason James <mtj@kohaaloha.com>
Adrien Saurat [Tue, 19 Mar 2013 16:00:40 +0000]
Bug 9848: SIP tests, fix in 10renew_all.t (additionnal checkin)
Adds a checkin operation at the beginning of the test.
Otherwise, a former test leaves the test item checked out
and this generates an error.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Mason James <mtj@kohaaloha.com>
Katrin Fischer [Sat, 21 Feb 2015 21:24:03 +0000]
Bug 13745: Fix serial collection page to always show branch name
The serial collection page shows 2 tables, one for the subscriptions
and a second for the issues. Both show the branch, but the first
showed the code while the second showed the name.
With this patch both tables show the name.
To test:
- Search for a subscription or create one
- Navigate to the serial collection page (navigation on left side)
- Check both tables on the page show the branch name with
the patch applied
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Mason James <mtj@kohaaloha.com>
Katrin Fischer [Sat, 21 Feb 2015 19:52:02 +0000]
Bug 13741: "No fund found" is not translatable
The string "No fund found" on the funds overview page is
not translatable.
To test:
- Create a new budget
- Check for the string on the funds page of the new budget
- Run an update on one of the po file sets
cd misc/translator
perl translate update <langcode>
- Verify that the string now appars in the po file for staff
- Verify the page still looks the same as before the patch
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Mason James <mtj@kohaaloha.com>
Mason James [Thu, 26 Mar 2015 02:57:26 +0000]
Bumping version
Mason James [Thu, 26 Mar 2015 01:54:30 +0000]
modified: installer/data/mysql/updatedatabase.pl
Tomas Cohen Arazi [Tue, 24 Feb 2015 17:20:31 +0000]
Bug 13523: DBIC updates
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Mason James <mtj@kohaaloha.com>
Benjamin Rokseth [Thu, 22 Jan 2015 11:21:47 +0000]
Bug 13523 - AddBiblio fails on mysql with STRICT_TRANS_TABLES
This patch removes the NOT NULL restriction on biblioitems.marcxml and
deletedbiblioitems.marcxml due to STRICT_TRANS_TABLES default in
Mysql 5.6.22 and onwards.
Test:
1. check mysql global settings:
mysql > SELECT @@GLOBAL.sql_mode;
verify that STRICT_TRANS_TABLES is not set
2. set STRICT_TRANS_TABLES (or upgrade mysql to > 5.6.21)
mysql > SET @@GLOBAL.sql_mode = 'STRICT_TRANS_TABLES';
3. try to add biblio in Cataloguing module
verify that it fails with a "software error"
4. apply patch
5. repeat 3 and verify that there is no "software error" any more
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
I confirm with the problem with mariadb and STRICT_TRANS_TABLES enabled.
On adding a biblio (C4::Biblio::AddBiblio), biblioitems is populate in
_koha_add_biblioitem but marxcml is not generated yet. It's in
ModBiblioMarc, few lines later.
The NOT NULL condition is not valid here.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Mason James <mtj@kohaaloha.com>
Viktor Sarge [Wed, 18 Feb 2015 21:02:09 +0000]
Bug 13729 - Give news in Opac a unique anchor
This patch introduces the use of the idnew-value from the opac_news table as a base for a unique anchor on each newsitem in Opac.
The anchor can be used for linking to specific newsitems and also for improving bug 7843 (RSS stream for news) with a unique link to each item in the RSS stream.
Test plan:
* Make shure you have a few news in the opac. Best is if it's enough to hide a few beneath the bottom of the window.
* Install the patch.
* Verify that you can access newitems with links like mykoha/cgi-bin/koha/opac-main.pl#newsitem4
* Experiment with removing newsitems and verify that that the newsitem-id stay unique to each newsitem.
Signed-off-by: Magnus Enger <magnus@enger.priv.no>
Works as advertised. Nice enhancement!
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Mason James <mtj@kohaaloha.com>
Marc Véron [Tue, 10 Feb 2015 17:16:45 +0000]
Bug 13682 - Capitalization: Holds Queue
This patch changes capitalization of Holds Queue to Holds queue in koha-tmpl/intranet-tmpl/prog/en/modules/circ/view_holdsqueu$
To test:
Apply patch
Go to Circulation > Holds queue page
Verify that the capitalization is correct
Signed-off-by: Magnus Enger <magnus@enger.priv.no>
Works as advertised.
Signed-off-by: Mason James <mtj@kohaaloha.com>
Rafal Kopaczka [Fri, 14 Nov 2014 13:06:22 +0000]
Bug 13254 - Delete record don't wait for confirmation
In some cases (eg. when Staf Client Search is active), when user choose
Edit->Delete record on record tool bar, browser don't wait for
confirmation and goes immediately to delete record.
To reproduce:
1. Search for some biblio records and choose one without items attached.
2. Note that there, must be "Return to search results" box on left side,
bug works in that case, when in normal view everything work fine.
3. Click Edit->Delete record, watch that confirmation box shows, but
don't wait for OK and runs immediately. If you are fast enough to
click OK, then you get error as below, because record was deleted
earlier.
To test:
1. Apply patch.
2. Follow reproduce steps.
3. Check if waits for confirmation in all cases.
4. Check if deletes record after confirm.
Followed test plan. Patch behaves as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Confirmed the problem and that the patch fixes it.
Good catch!
Signed-off-by: Mason James <mtj@kohaaloha.com>
Jonathan Druart [Fri, 6 Mar 2015 09:55:12 +0000]
Bug 13801: svc/bib - Set charset to utf-8 on printing header
Test plan:
0/ Add unicode characters on the record biblionumber=X
1/ go on http://<staff-interface>/cgi-bin/koha/svc/bib/X
2/ Confirm you have encoding issues
3/ Apply the patch
4/ Repeat 2
5/ Confirm that all is correctly encoded
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Mason James <mtj@kohaaloha.com>
Tomas Cohen Arazi [Mon, 18 Aug 2014 20:20:24 +0000]
Bug 12782: (followup) skip tests that fail because of provider's error
It seems that XISBN is failing sometimes, if you run the tests a couple
of times in a row. An error 500 is raised by lwp.
This problem should be trapped and related tests skipped. Because too much
noise could make people pay no attention to this tests failing.
To reproduce:
- Run the tests several consecutive times:
$ prove -v t/db_dependent/XISBN.t
=> FAIL: XISBN test will fail eventually, printing a networking-related warning.
- Apply the patch
- Repeat the test
=> SUCCESS: when XISBN the networking/connection refused problem arises, the test
is skipped, and it still passes.
Regards
To+
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Mason James <mtj@kohaaloha.com>
Tomas Cohen Arazi [Mon, 18 Aug 2014 19:42:39 +0000]
Bug 12782: t/db_dependent/XISBN.t fails in DOM setup
To test:
- Have a DOM setup
- Run
$ prove -v t/db_dependent/XISBN.t
=> FAIL: Can't call method "field" on an undefined value at .... C4/Search.pm ...
- Apply the patch
- Run
$ prove -v t/db_dependent/XISBN.t
=> SUCCESS: Tests pass.
- Sign off
Regards
To+
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Mason James <mtj@kohaaloha.com>
Mason James [Tue, 3 Mar 2015 11:40:02 +0000]
Adding release notes
Mason James [Thu, 26 Feb 2015 05:33:18 +0000]
Bumping version number for 3.16.8 release
Mason James [Fri, 27 Feb 2015 14:17:59 +0000]
Revert "Bug 13431 - Shared FastMmap file causes issues"
This reverts commit
8705cb845ef78c5e941a7a1ee8765fdd8cc40e8b.
Mason James [Fri, 27 Feb 2015 14:17:49 +0000]
Revert "Bug 13431 [QA Follow-up]: Shared FastMmap file causes issues"
This reverts commit
081ce4ba27ec032e70a57d7f056e8aaa23490542.
Bernardo Gonzalez Kriegel [Sun, 22 Feb 2015 23:06:34 +0000]
Translation updates for Koha 3.16.08 release
Signed-off-by: Mason James <mtj@kohaaloha.com>
Kyle M Hall [Fri, 20 Feb 2015 12:23:15 +0000]
Bug 12858 [QA Followup] - Don't call webservice if we have no data
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Mason James <mtj@kohaaloha.com>
Martin Renvoize [Tue, 2 Sep 2014 09:14:03 +0000]
Bug 12858: Add error handling to Syndetics Index
* Syndetics routines include a statement to check that the returned
content from Syndetics is xml. The get_syndetics_index routine was
missing this check and so when a 'not found' html page was returned
the opac-detail page would take a long time to load whilst xml::simple
attempted to parse the large html document.
Test Plan
1. Enable Syndetics indexes on opac.
2. Head over to an opac-detail page on the opac.
3. Remove the ISBN from the same item in the staff client.
4. Reload the opac-detail page for the item noticeing a much slower
page load.
5. Apply the patch
6. Reload the opac-detail page for the item and note that it now laods
in a reasonable timescale again.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Mason James <mtj@kohaaloha.com>
Kyle M Hall [Tue, 20 Jan 2015 15:11:24 +0000]
Bug 13603 - autoBarcode setting hbyymmincr not taking month into account when looking up next increment
The hbyymmincr autoBarcode builder looks up all barcodes that begin with
any number of letters ( the branchcode ) and a two-digit year directly
afterward ( e.g. MPL15 ), then grabs the last four digits as the
increment counter. The problem is, this does not take months into
account, so unlike the description that says the system is limited to
10,000 items a month, it is limited to 10,000 items per *year*.
This situation can easily be corrected my adding the month into the
lookup ( e.g. MPL1501 ).
Test Plan:
1) Enable autoBarcode, set to hbyymmincr
2) Catalog an item, let the barcode.pl plugin generate
the next barcode.
3) Catalog an item with the barcode MPL15009999
4) Catalog another item, use the barcode.pl plugin to
generate the next barcode.
5) Note the barcode is generated ends with '0001' instead of the
correct increment
6) Apply this patch
7) Repeat step 4
8) Note the barcode now ends with the correct increment
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jeanne Heicher <nppublib@pa.net>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Problem confirmed - the continuing number bit was not reset
to start counting from 1 again on the beginning of a new month.
Signed-off-by: Mason James <mtj@kohaaloha.com>
Jonathan Druart [Wed, 26 Nov 2014 14:14:59 +0000]
Bug 13343: Embed items when send a basket/shelf
When a basket/shelf is downloaded, items are embedded, but not when
sending it by email.
We would expect to get the same file.
Test plan:
On Opac and intranet:
1/ Add records with items to your basket and send it by email.
Verify the file contains items.
2/ Add records with items to a list and send it by email.
Verify the file contains items.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Mason James <mtj@kohaaloha.com>
Jacek Ablewicz [Tue, 30 Dec 2014 09:30:30 +0000]
Bug 13431 [QA Follow-up]: Shared FastMmap file causes issues
1) Removed 'use C4::Context;' because it can lead to introduction
of circular reference in the near future
2) Put fastmmap initialization code into an eval {} block, to catch
various kinds of errors which can still occur during it's init in
some [less usual] Koha setups and/or more unusual circumstances
3) Do not include UID in the sharefile name (it will be constructed
using namespace + database name + database host instead).
Test plan addendum:
s/and UID//
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Mason James <mtj@kohaaloha.com>
Jacek Ablewicz [Tue, 16 Dec 2014 11:48:09 +0000]
Bug 13431 - Shared FastMmap file causes issues
Koha::Cache package does not take into account that, when using
fastmmap caching variant, mmaped cache file created in /tmp
(typically: /tmp/sharefile-koha-koha), would only be further
accessible to the one given OS user - the one which created it.
In many Koha setups, in the circumstances when various system scripts
are executed by 2+ users with diffrent UIDs (like multi-tenant servers,
for example) this may cause many kinds of issues. Observable symptom
is usually the appearance of the below error when searching, or looking
at MARC Framework pages and a few other places:
Open of share file /tmp/sharefile-koha-koha failed: Permission denied
at /usr/lib/perl5/Cache/FastMmap.pm line 640.
This patch:
- disables initialisation of fastmmap caching subsystem unless it is
explicitly requested by the user (CACHING_SYSTEM=fastmmap)
- disables fastmmap cache usage for command line scripts
(i.e. when GATEWAY_INTERFACE environment variable is not defined)
- adds the database name, host name and an ID of the OS user to the
mmaped file name created in /tmp, to prevent various kinds of
unintentional conflicts and/or permission problems from happening
To test:
1) remove the /tmp/sharefile-koha-* file[s] (if any)
2) do something which would lead to its re-creation (e.g., performing
any search in OPAC should be sufficient to cause that)
3) observe that /tmp/sharefile-koha-koha got created
4) remove it
5) apply patch
6) redo step 2)
7) observe that aforementioned file is no longer created in /tmp
8) set CACHING_SYSTEM environment variable to 'fastmmap'
9) redo step 2), observe that /tmp/sharefile-koha-* file got created
and that it's name now contains hostname, database name and UID
10) ensure that everything still works like it should and that there
are no regressions of any kinds anywhere in the system ;)
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Mason James <mtj@kohaaloha.com>
Kyle M Hall [Wed, 21 May 2014 18:09:04 +0000]
Bug 12323 [SIGNED OFF] - Acquisitions search results fixed in order of biblionumber
The acquisitions search is exhibiting the same behavior as bug 11410.
Results are always fixed in order of biblionumber, among other possible
issues ( including the ampersand issue ).
Test Plan:
1) From an open basket, choose "Add to basket"
2) Run a search for "From an existing record"
3) Note the "View MARC" URLs are fixed in order of biblionumber
4) Apply this patch
5) Refresh the page
6) Note the results are no longer fixed in order of biblionumber
Signed-off-by: David Cook <dcook@prosentient.com.au>
Works as described.
I think the code could be a bit tidier, but I think it makes sense to
use buildQuery here. It'll detect CCL, CQL, and PQF queries, as well
as parsing a regular keyword search as one would expect when searching
the catalogue.
It also has the added bonus of performing relevance searching,
so long as QueryAutoTruncation is off, and so long as library staff
avoid using the "*" truncation wildcard (see bug 12430).
While there are simpler ways to fix this acq bug, I think this was
probably the best move, as it adds a bit to the consistency of what
librarians can expect from their search results.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Same result with and without the patch but I agree with the changes.
BuildQuery should be called before SimpleSearch if QP is not used.
Signed-off-by: Mason James <mtj@kohaaloha.com>
Mark Tompsett [Wed, 19 Nov 2014 18:28:12 +0000]
Bug 11954 - Clean up currency default files
It makes no sense to have TRUNCATE or foreign key checks.
TEST PLAN
---------
1) Back up your database
2) in an mysql client:
use kohadata;
SET FOREIGN_KEY_CHECKS=0;
TRUNCATE currency;
source /home/mtompset/kohaclone/installer/data/mysql/ru-RU/optional/sample_currency.sql
SET FOREIGN_KEY_CHECKS=0;
TRUNCATE currency;
source /home/mtompset/kohaclone/installer/data/mysql/uk-UA/optional/sample_currency.sql
SET FOREIGN_KEY_CHECKS=0;
TRUNCATE currency;
source /home/mtompset/kohaclone/installer/data/mysql/it-IT/necessari/parameters.sql
SET FOREIGN_KEY_CHECKS=1;
QUIT
-- These should all work without problem.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Mason James <mtj@kohaaloha.com>
Jonathan Druart [Wed, 5 Nov 2014 11:41:13 +0000]
Bug 13201: GetSuggestion takes suggestionid
Having $ordernumber as the parameter in a function which is
handling suggestions and it is used as a suggestion id is
confusing to the coder and person trying to read the code.
This patch corrects the confusion.
REVISED TEST PLAN
-----------------
1) perldoc C4::Suggestions
-- notice it says ordernumber for the GetSuggestions example.
2) Ensure you have CPL in your branches table.
3) prove -v t/db_dependent/Suggestions.t
-- if you have more than 8 itemtypes in your database, two
tests at the end will fail, but that is not relevant to
the modified GetSuggestions code.
4) apply patch
5) perldoc C4::Suggestions
-- notice it is corrected now.
6) prove -v t/db_dependent/Suggestions.t
-- it should run with the same results as in step 3.
That is, if you have 8 itemtypes, all pass, otherwise
those two tests fail.
7) run koha qa test tool
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Mason James <mtj@kohaaloha.com>
Fridolin Somers [Fri, 5 Dec 2014 14:50:05 +0000]
Bug 13401 - sort branches alphabetically in admin/authorised_values.pl
This patch adds a sort of branches alphabetically by name in authorised values administration, like in many other pages.
Also replaces var $branch (too ambigus) by $branchcode.
Test plan :
- Create 2 branches : code=AAA,name=Zbranch and code=ZZZ,name=Abranch
- Create a new authorized value : admin/authorised_values.pl
- Look at "Libraries limitation" :
=> Without patch branches are sorted by code : Zbranch then Abranch
=> Without patch branches are sorted by name : Abranch then Zbranch
- Select a branch and save
- Re-edit
=> Check the same branch is selected
Followed test plan. Patch behaves as expected.
Signed-off-by: Marc Veron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Mason James <mtj@kohaaloha.com>
Olli-Antti Kivilahti [Tue, 20 Jan 2015 14:48:13 +0000]
Bug 13602 - Username/password already exists when editing borrower attributes and messaging preferences
When editing a Patron's messaging preferences or borrower attributes, one cannot
save changes because 'userid' is not given as a parameter.
It shouldn't, but the
Check_Userid($newdata{'userid'},$borrowernumber) -check must have it.
REPLICATE THE ISSUE:
1. Find a Borrower.
2. Go to the details-tab.
3. Under "Patron messaging preferences" click edit to edit just the messaging
preferences.
4. Just save, no need to make any modifications.
5. Observe the error "Username/password already exists"
This happens to all/most of the sub-forms in the Borrower's Details-view.
AFTER THIS PATCH:
Check_Userid() get the $userid from the new parameters, or if not present, from
the koha.borrowers-table.
TEST FOR REGRESSION:
1. Edit a borrower normally. Notice no errors.
2. Edit a sub-form (Alternate address/Patron messaging preferences). Notice no
errors.
DISCLAIMER: You are free to steal/rip/modify/hack this patch to your soul's
extent without my permission. As long as it makes to Koha I am happy.
Works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Mason James <mtj@kohaaloha.com>
projects / koha.git / log