1 = Installing the Evergreen server =
4 == Preamble: referenced user accounts ==
6 In subsequent sections, we will refer to a number of different accounts, as
10 ** The *user* Linux account is the account that you use to log onto the
11 Linux system as a regular user.
12 ** The *root* Linux account is an account that has system administrator
13 privileges. On Debian you can switch to this account from
14 your *user* account by issuing the `su -` command and entering the
15 password for the *root* account when prompted. On Ubuntu you can switch
16 to this account from your *user* account using the `sudo su -` command
17 and entering the password for your *user* account when prompted.
18 ** The *opensrf* Linux account is an account that you create when installing
19 OpenSRF. You can switch to this account from the *root* account by
20 issuing the `su - opensrf` command.
21 ** The *postgres* Linux account is created automatically when you install
22 the PostgreSQL database server. You can switch to this account from the
23 *root* account by issuing the `su - postgres` command.
24 * PostgreSQL user accounts:
25 ** The *evergreen* PostgreSQL account is a superuser account that you will
26 create to connect to the PostgreSQL database server.
27 * Evergreen administrator account:
28 ** The *egadmin* Evergreen account is an administrator account for
29 Evergreen that you will use to test connectivity and configure your
32 == Preamble: developer instructions ==
35 Skip this section if you are using an official release tarball downloaded
36 from http://evergreen-ils.org/egdownloads
38 Developers working directly with the source code from the Git repository,
39 rather than an official release tarball, must perform one step before they
40 can proceed with the `./configure` step.
42 As the *user* Linux account, issue the following command in the Evergreen
43 source directory to generate the configure script and Makefiles:
46 ------------------------------------------------------------------------------
48 ------------------------------------------------------------------------------
50 == Installing prerequisites ==
52 * **PostgreSQL**: The minimum supported version is 10.
53 * **Linux**: Evergreen has been tested on
56 Ubuntu Jammy Jellyfish (22.04),
57 and Ubuntu Focal Fossa (20.04).
58 If you are running an older version of these distributions, you may want
59 to upgrade before upgrading Evergreen. For instructions on upgrading these
60 distributions, visit the Debian or Ubuntu websites.
61 * **OpenSRF**: The minimum supported version of OpenSRF is 3.2.0.
64 Evergreen has a number of prerequisite packages that must be installed
65 before you can successfully configure, compile, and install Evergreen.
67 1. Begin by installing the most recent version of OpenSRF (3.2.0 or later).
68 You can download OpenSRF releases from http://evergreen-ils.org/opensrf-downloads/
70 2. Issue the following commands as the *root* Linux account to install
71 prerequisites using the `Makefile.install` prerequisite installer,
72 substituting `debian-bullseye`,`debian-buster`,`ubuntu-jammy`,
73 or `ubuntu-focal` for <osname> below:
76 ------------------------------------------------------------------------------
77 make -f Open-ILS/src/extras/Makefile.install <osname>
78 ------------------------------------------------------------------------------
80 [[optional_developer_additions]]
81 3. OPTIONAL: Developer additions
83 To perform certain developer tasks from a Git source code checkout,
84 additional packages are required. As the *root* Linux account:
86 * To install packages needed for retrieving and managing web dependencies,
87 use the <osname>-developer Makefile.install target. Currently,
88 this is only needed for building and installing the web
90 * To optionally run Angular and AngularJS tests you will need to manually
91 install Firefox and your choice of Chromium or Chrome.
94 ------------------------------------------------------------------------------
95 make -f Open-ILS/src/extras/Makefile.install <osname>-developer
96 ------------------------------------------------------------------------------
98 * To install packages required for building Evergreen translations, use
99 the <osname>-translator Makefile.install target.
102 ------------------------------------------------------------------------------
103 make -f Open-ILS/src/extras/Makefile.install <osname>-translator
104 ------------------------------------------------------------------------------
106 * To install packages required for building Evergreen release bundles, use
107 the <osname>-packager Makefile.install target.
110 ------------------------------------------------------------------------------
111 make -f Open-ILS/src/extras/Makefile.install <osname>-packager
112 ------------------------------------------------------------------------------
114 == Extra steps for web staff client ==
117 Skip this entire section if you are using an official release tarball downloaded
118 from http://evergreen-ils.org/downloads. Otherwise, ensure you have installed the
119 xref:#optional_developer_additions[optional developer additions] before proceeding.
121 [[install_files_for_web_staff_client]]
122 === Install AngularJS files for web staff client ===
124 1. Building, Testing, Minification: The remaining steps all take place within
125 the staff JS web root:
128 ------------------------------------------------------------------------------
129 cd $EVERGREEN_ROOT/Open-ILS/web/js/ui/default/staff/
130 ------------------------------------------------------------------------------
132 2. Install Project-local Dependencies. npm inspects the 'package.json' file
133 for dependencies and fetches them from the Node package network.
136 ------------------------------------------------------------------------------
137 npm install # fetch JS dependencies
138 ------------------------------------------------------------------------------
140 3. Run the build script.
143 ------------------------------------------------------------------------------
145 ------------------------------------------------------------------------------
147 4. OPTIONAL: Test web client code if the <osname>-developer packages and
148 the necessary browsers are installed.
149 CHROME_BIN should be set to the path to chrome or chromimum, e.g.,
153 ------------------------------------------------------------------------------
154 CHROME_BIN=/path/to/chrome npm run test
155 ------------------------------------------------------------------------------
157 [[install_files_for_angular_web_staff_client]]
158 === Install Angular files for web staff client ===
160 1. Building, Testing, Minification: The remaining steps all take place within
161 the Angular staff root:
164 ------------------------------------------------------------------------------
165 cd $EVERGREEN_ROOT/Open-ILS/src/eg2/
166 ------------------------------------------------------------------------------
168 2. Install Project-local Dependencies. npm inspects the 'package.json' file
169 for dependencies and fetches them from the Node package network.
172 ------------------------------------------------------------------------------
173 npm install # fetch JS dependencies
174 ------------------------------------------------------------------------------
176 3. Run the build script.
179 ------------------------------------------------------------------------------
180 ng build --configuration=production
181 ------------------------------------------------------------------------------
183 This can be a memory-intensive build. If the process does not finish, and you
184 get the message "Killed" in the console, try running it with
185 https://nodejs.org/api/cli.html#cli_max_old_space_size_size_in_megabytes[an explicit max-old-space-size option]
186 to encourage more garbage collection. For example, on a machine with 4GB of
187 memory, you can limit max-old-space-size to 3GB with:
190 ------------------------------------------------------------------------------
191 NODE_OPTIONS=--max-old-space-size=3072 ng build --configuration=production
192 ------------------------------------------------------------------------------
194 4. OPTIONAL: Test eg2 web client code if the <osname>-developer packages and
195 the necessary browsers are installed:
196 CHROME_BIN should be set to the path to chrome or chromimum, e.g.,
200 ------------------------------------------------------------------------------
201 CHROME_BIN=/path/to/chrome npm run test
202 ------------------------------------------------------------------------------
204 [[install_opac_deps]]
205 === Install OPAC skin dependencies ===
207 1. The following steps take place within the OPAC dependencies root:
210 ------------------------------------------------------------------------------
211 cd $EVERGREEN_ROOT/Open-ILS/web/opac/deps
212 ------------------------------------------------------------------------------
214 2. Install Project-local Dependencies. npm inspects the 'package.json' file
215 for dependencies and fetches them from the Node package network.
218 ------------------------------------------------------------------------------
219 npm install # fetch JS and CSS dependencies
220 ------------------------------------------------------------------------------
222 Note that there is no build step.
224 == Configuration and compilation instructions ==
226 For the time being, we are still installing everything in the `/openils/`
227 directory. From the Evergreen source directory, issue the following commands as
228 the *user* Linux account to configure and build Evergreen:
231 ------------------------------------------------------------------------------
232 PATH=/openils/bin:$PATH ./configure --prefix=/openils --sysconfdir=/openils/conf
234 ------------------------------------------------------------------------------
236 These instructions assume that you have also installed OpenSRF under `/openils/`.
237 If not, please adjust PATH as needed so that the Evergreen `configure` script
238 can find `osrf_config`.
240 == Installation instructions ==
242 1. Once you have configured and compiled Evergreen, issue the following
243 command as the *root* Linux account to install Evergreen and copy
244 example configuration files to `/openils/conf`.
247 ------------------------------------------------------------------------------
249 ------------------------------------------------------------------------------
251 == Change ownership of the Evergreen files ==
253 All files in the `/openils/` directory and subdirectories must be owned by the
254 `opensrf` user. Issue the following command as the *root* Linux account to
255 change the ownership on the files:
258 ------------------------------------------------------------------------------
259 chown -R opensrf:opensrf /openils
260 ------------------------------------------------------------------------------
264 On Ubuntu or Debian, run the following command as the root user:
267 ------------------------------------------------------------------------------
269 ------------------------------------------------------------------------------
271 == Additional Instructions for Developers ==
274 Skip this section if you are using an official release tarball downloaded
275 from http://evergreen-ils.org/egdownloads
277 Developers working directly with the source code from the Git repository,
278 rather than an official release tarball, need to install the Dojo Toolkit
279 set of JavaScript libraries. The appropriate version of Dojo is included in
280 Evergreen release tarballs. Developers should install the Dojo 1.3.3 version
281 of Dojo by issuing the following commands as the *opensrf* Linux account:
284 ------------------------------------------------------------------------------
285 wget http://download.dojotoolkit.org/release-1.3.3/dojo-release-1.3.3.tar.gz
286 tar -C /openils/var/web/js -xzf dojo-release-1.3.3.tar.gz
287 cp -r /openils/var/web/js/dojo-release-1.3.3/* /openils/var/web/js/dojo/.
288 ------------------------------------------------------------------------------
291 == Configure the Apache Web server ==
293 . Use the example configuration files to configure your Web server for
294 the Evergreen catalog, web staff client, Web services, and administration
295 interfaces. Issue the following commands as the *root* Linux account:
298 ------------------------------------------------------------------------------------
299 cp Open-ILS/examples/apache_24/eg_24.conf /etc/apache2/sites-available/eg.conf
300 cp Open-ILS/examples/apache_24/eg_vhost_24.conf /etc/apache2/eg_vhost.conf
301 cp Open-ILS/examples/apache_24/eg_startup /etc/apache2/
303 mkdir /etc/apache2/ssl
305 ------------------------------------------------------------------------------------
307 . The `openssl` command cuts a new SSL key for your Apache server. For a
308 production server, you should purchase a signed SSL certificate, but you can
309 just use a self-signed certificate and accept the warnings in the
310 and browser during testing and development. Create an SSL key for the Apache
311 server by issuing the following command as the *root* Linux account:
314 ------------------------------------------------------------------------------
315 openssl req -new -x509 -days 365 -nodes -out server.crt -keyout server.key
316 ------------------------------------------------------------------------------
318 . As the *root* Linux account, edit the `eg.conf` file that you copied into
320 a. To enable access to the offline upload / execute interface from any
321 workstation on any network, make the following change (and note that
322 you *must* secure this for a production instance):
323 * Replace `Require host 10.0.0.0/8` with `Require all granted`
324 . Change the user for the Apache server.
325 * As the *root* Linux account, edit
326 `/etc/apache2/envvars`. Change `export APACHE_RUN_USER=www-data` to
327 `export APACHE_RUN_USER=opensrf`.
328 . As the *root* Linux account, configure Apache with KeepAlive settings
329 appropriate for Evergreen. Higher values can improve the performance of a
330 single client by allowing multiple requests to be sent over the same TCP
331 connection, but increase the risk of using up all available Apache child
332 processes and memory.
333 * Edit `/etc/apache2/apache2.conf`.
334 a. Change `KeepAliveTimeout` to `1`.
335 b. Change `MaxKeepAliveRequests` to `100`.
336 . As the *root* Linux account, configure the prefork module to start and keep
337 enough Apache servers available to provide quick responses to clients without
338 running out of memory. The following settings are a good starting point for a
339 site that exposes the default Evergreen catalog to the web:
341 .`/etc/apache2/mods-available/mpm_prefork.conf`
343 ------------------------------------------------------------------------------
344 <IfModule mpm_prefork_module>
349 MaxConnectionsPerChild 500
351 ------------------------------------------------------------------------------
353 . As the *root* user, enable the mpm_prefork module:
356 ------------------------------------------------------------------------------
359 ------------------------------------------------------------------------------
361 . As the *root* Linux account, enable the Evergreen site:
364 ------------------------------------------------------------------------------
365 a2dissite 000-default # OPTIONAL: disable the default site (the "It Works" page)
367 ------------------------------------------------------------------------------
369 . As the *root* Linux account, enable Apache to write
370 to the lock directory; this is currently necessary because Apache
371 is running as the `opensrf` user:
374 ------------------------------------------------------------------------------
375 chown opensrf /var/lock/apache2
376 ------------------------------------------------------------------------------
378 Learn more about additional Apache options in the following sections:
380 * xref:admin:apache_rewrite_tricks.adoc#apache_rewrite_tricks[Apache Rewrite Tricks]
381 * xref:admin:apache_access_handler.adoc#apache_access_handler_perl_module[Apache Access Handler Perl Module]
383 == Configure OpenSRF for the Evergreen application ==
385 There are a number of example OpenSRF configuration files in `/openils/conf/`
386 that you can use as a template for your Evergreen installation. Issue the
387 following commands as the *opensrf* Linux account:
390 ------------------------------------------------------------------------------
391 cp -b /openils/conf/opensrf_core.xml.example /openils/conf/opensrf_core.xml
392 cp -b /openils/conf/opensrf.xml.example /openils/conf/opensrf.xml
393 ------------------------------------------------------------------------------
395 When you installed OpenSRF, you created four Jabber users on two
396 separate domains and edited the `opensrf_core.xml` file accordingly. Please
397 refer back to the OpenSRF README and, as the *opensrf* Linux account, edit the
398 Evergreen version of the `opensrf_core.xml` file using the same Jabber users
399 and domains as you used while installing and testing OpenSRF.
402 The `-b` flag tells the `cp` command to create a backup version of the
403 destination file. The backup version of the destination file has a tilde (`~`)
404 appended to the file name, so if you have forgotten the Jabber users and
405 domains, you can retrieve the settings from the backup version of the files.
407 `eg_db_config`, described in xref:#creating_the_evergreen_database[Creating the Evergreen database], sets the database connection information in `opensrf.xml` for you.
409 === Configure action triggers for the Evergreen application ===
410 _Action Triggers_ provide hooks for the system to perform actions when a given
411 event occurs; for example, to generate reminder or overdue notices, the
412 `checkout.due` hook is processed and events are triggered for potential actions
413 if there is no checkin time.
415 To enable the default set of hooks, issue the following command as the
416 *opensrf* Linux account:
419 ------------------------------------------------------------------------------
420 cp -b /openils/conf/action_trigger_filters.json.example /openils/conf/action_trigger_filters.json
421 ------------------------------------------------------------------------------
423 For more information about configuring and running action triggers, see
424 xref:admin:actiontriggers_process.adoc#processing_action_triggers[Notifications / Action Triggers].
426 [[creating_the_evergreen_database]]
427 == Creating the Evergreen database ==
429 === Setting up the PostgreSQL server ===
431 For production use, most libraries install the PostgreSQL database server on a
432 dedicated machine. Therefore, by default, the `Makefile.install` prerequisite
433 installer does *not* install the PostgreSQL database server that is required
434 by every Evergreen system. You can install the packages required by Debian or
435 Ubuntu on the machine of your choice using the following commands as the
436 *root* Linux account:
438 .Installing PostgreSQL server packages
440 Each OS build target provides the postgres server installation
441 packages required for each operating system. To install Postgres
442 server packages, use the make target
443 'postgres-server-<OSTYPE>-<POSTGRESVERSION>'. Choose the most
444 appropriate command below based on your operating system and desired
447 The first below will install PostgreSQL 10, the minimum supported
448 version and the version recommended for production use of Evergreen:
451 ------------------------------------------------------------------------------
452 make -f Open-ILS/src/extras/Makefile.install postgres-server-debian-bullseye-10
453 make -f Open-ILS/src/extras/Makefile.install postgres-server-debian-buster-10
454 make -f Open-ILS/src/extras/Makefile.install postgres-server-ubuntu-focal-10
455 make -f Open-ILS/src/extras/Makefile.install postgres-server-ubuntu-jammy-10
456 ------------------------------------------------------------------------------
460 Evergreen support for PostgreSQL server versions greater than 10 is
461 still exprimental. The use of the following is discouraged in
462 production environments. The following are only recommended if you
463 are willing to test newer PostgreSQL versions for performance and
467 To install PostgreSQL version 11, use the following command for your operating
471 ------------------------------------------------------------------------------
472 make -f Open-ILS/src/extras/Makefile.install postgres-server-debian-bullseye-11
473 make -f Open-ILS/src/extras/Makefile.install postgres-server-debian-buster-11
474 make -f Open-ILS/src/extras/Makefile.install postgres-server-ubuntu-focal-11
475 make -f Open-ILS/src/extras/Makefile.install postgres-server-ubuntu-jammy-11
476 ------------------------------------------------------------------------------
478 To install PostgreSQL version 12, use the following command for your operating
482 ------------------------------------------------------------------------------
483 make -f Open-ILS/src/extras/Makefile.install postgres-server-debian-bullseye-12
484 make -f Open-ILS/src/extras/Makefile.install postgres-server-debian-buster-12
485 make -f Open-ILS/src/extras/Makefile.install postgres-server-ubuntu-focal-12
486 make -f Open-ILS/src/extras/Makefile.install postgres-server-ubuntu-jammy-12
487 ------------------------------------------------------------------------------
489 To install PostgreSQL version 13, use the following command for your operating
493 ------------------------------------------------------------------------------
494 make -f Open-ILS/src/extras/Makefile.install postgres-server-debian-bullseye-13
495 make -f Open-ILS/src/extras/Makefile.install postgres-server-debian-buster-13
496 make -f Open-ILS/src/extras/Makefile.install postgres-server-ubuntu-focal-13
497 make -f Open-ILS/src/extras/Makefile.install postgres-server-ubuntu-jammy-13
498 ------------------------------------------------------------------------------
500 To install PostgreSQL version 14, use the following command for your operating
504 ------------------------------------------------------------------------------
505 make -f Open-ILS/src/extras/Makefile.install postgres-server-debian-bullseye-14
506 make -f Open-ILS/src/extras/Makefile.install postgres-server-debian-buster-14
507 make -f Open-ILS/src/extras/Makefile.install postgres-server-ubuntu-focal-14
508 make -f Open-ILS/src/extras/Makefile.install postgres-server-ubuntu-jammy-14
509 ------------------------------------------------------------------------------
511 To install PostgreSQL version 15, use the following command for your operating
515 ------------------------------------------------------------------------------
516 make -f Open-ILS/src/extras/Makefile.install postgres-server-debian-bullseye-15
517 make -f Open-ILS/src/extras/Makefile.install postgres-server-debian-buster-15
518 make -f Open-ILS/src/extras/Makefile.install postgres-server-ubuntu-focal-15
519 make -f Open-ILS/src/extras/Makefile.install postgres-server-ubuntu-jammy-15
520 ------------------------------------------------------------------------------
522 .Create the Evergreen PostgreSQL user
524 You need to create a PostgreSQL superuser to create and access the database.
525 Issue the following command as the *postgres* Linux account to create a new
526 PostgreSQL superuser named `evergreen`. When prompted, enter the new user's
530 ------------------------------------------------------------------------------
531 createuser -s -P evergreen
532 ------------------------------------------------------------------------------
534 .Enabling connections to the PostgreSQL database
536 Your PostgreSQL database may be configured by default to prevent connections,
537 for example, it might reject attempts to connect via TCP/IP or from other
538 servers. To enable TCP/IP connections from localhost, check your `pg_hba.conf`
539 file, found in the `/etc/postgresql/` directory on Debian and Ubuntu.
540 A simple way to enable TCP/IP
541 connections from localhost to all databases with password authentication, which
542 would be suitable for a test install of Evergreen on a single server, is to
543 ensure the file contains the following entries _before_ any "host ... ident"
546 ------------------------------------------------------------------------------
547 host all all ::1/128 md5
548 host all all 127.0.0.1/32 md5
549 ------------------------------------------------------------------------------
551 When you change the `pg_hba.conf` file, you will need to reload PostgreSQL to
552 make the changes take effect. For more information on configuring connectivity
554 http://www.postgresql.org/docs/devel/static/auth-pg-hba-conf.html
556 === Creating the Evergreen database and schema ===
558 Once you have created the *evergreen* PostgreSQL account, you also need to
559 create the database and schema, and configure your configuration files to point
560 at the database server. Issue the following command as the *root* Linux account
561 from inside the Evergreen source directory, replacing <user>, <password>,
562 <hostname>, <port>, and <dbname> with the appropriate values for your
563 PostgreSQL database (where <user> and <password> are for the *evergreen*
564 PostgreSQL account you just created), and replace <admin-user> and <admin-pass>
565 with the values you want for the *egadmin* Evergreen administrator account:
568 ------------------------------------------------------------------------------
569 perl Open-ILS/src/support-scripts/eg_db_config --update-config \
570 --service all --create-database --create-schema --create-offline \
571 --user <user> --password <password> --hostname <hostname> --port <port> \
572 --database <dbname> --admin-user <admin-user> --admin-pass <admin-pass>
573 ------------------------------------------------------------------------------
575 This creates the database and schema and configures all of the services in
576 your `/openils/conf/opensrf.xml` configuration file to point to that database.
577 It also creates the configuration files required by the Evergreen `cgi-bin`
578 administration scripts, and sets the user name and password for the *egadmin*
579 Evergreen administrator account to your requested values.
581 You can get a complete set of options for `eg_db_config` by passing the
584 === Loading sample data ===
586 If you add the `--load-all-sample` parameter to the `eg_db_config` command,
587 a set of authority and bibliographic records, call numbers, copies, staff
588 and regular users, and transactions will be loaded into your target
589 database. This sample dataset is commonly referred to as the _concerto_
590 sample data, and can be useful for testing out Evergreen functionality and
591 for creating problem reports that developers can easily recreate with their
592 own copy of the _concerto_ sample data.
594 === Creating the database on a remote server ===
596 In a production instance of Evergreen, your PostgreSQL server should be
597 installed on a dedicated server.
599 To create the database instance on a remote database server, simply
600 use the `--create-database` flag on `eg_db_config`.
602 == Starting Evergreen ==
604 1. As the *root* Linux account, start the `memcached` and `ejabberd` services
605 (if they aren't already running):
608 ------------------------------------------------------------------------------
609 /etc/init.d/ejabberd start
610 /etc/init.d/memcached start
611 ------------------------------------------------------------------------------
613 2. As the *opensrf* Linux account, start Evergreen. The `-l` flag in the
614 following command is only necessary if you want to force Evergreen to treat the
615 hostname as `localhost`; if you configured `opensrf.xml` using the real
616 hostname of your machine as returned by `perl -ENet::Domain 'print
617 Net::Domain::hostfqdn() . "\n";'`, you should not use the `-l` flag.
620 ------------------------------------------------------------------------------
621 osrf_control -l --start-all
622 ------------------------------------------------------------------------------
624 ** If you receive the error message `bash: osrf_control: command not found`,
625 then your environment variable `PATH` does not include the `/openils/bin`
626 directory; this should have been set in the *opensrf* Linux account's
627 `.bashrc` configuration file. To manually set the `PATH` variable, edit the
628 configuration file `~/.bashrc` as the *opensrf* Linux account and add the
632 ------------------------------------------------------------------------------
633 export PATH=$PATH:/openils/bin
634 ------------------------------------------------------------------------------
636 3. As the *opensrf* Linux account, generate the Web files needed by the web staff
637 client and catalog and update the organization unit proximity (you need to do
638 this the first time you start Evergreen, and after that each time you change the library org unit configuration.
642 ------------------------------------------------------------------------------
644 ------------------------------------------------------------------------------
646 4. As the *root* Linux account, restart the Apache Web server:
649 ------------------------------------------------------------------------------
650 /etc/init.d/apache2 restart
651 ------------------------------------------------------------------------------
653 If the Apache Web server was running when you started the OpenSRF services, you
654 might not be able to successfully log in to the OPAC or web staff client until the
655 Apache Web server is restarted.
657 == Testing connections to Evergreen ==
659 Once you have installed and started Evergreen, test your connection to
660 Evergreen via `srfsh`. As the *opensrf* Linux account, issue the following
661 commands to start `srfsh` and try to log onto the Evergreen server using the
662 *egadmin* Evergreen administrator user name and password that you set using the
663 `eg_db_config` command:
666 ------------------------------------------------------------------------------
668 srfsh% login <admin-user> <admin-pass>
669 ------------------------------------------------------------------------------
671 You should see a result like:
673 Received Data: "250bf1518c7527a03249858687714376"
674 ------------------------------------
675 Request Completed Successfully
676 Request Time in seconds: 0.045286
677 ------------------------------------
681 "textcode":"SUCCESS",
684 "stacktrace":"oils_auth.c:304",
686 "authtoken":"e5f9827cc0f93b503a1cc66bee6bdd1a",
692 ------------------------------------
693 Request Completed Successfully
694 Request Time in seconds: 1.336568
695 ------------------------------------
696 [[install-troubleshooting-1]]
697 If this does not work, it's time to do some troubleshooting.
699 * As the *opensrf* Linux account, run the `settings-tester.pl` script to see
700 if it finds any system configuration problems. The script is found at
701 `Open-ILS/src/support-scripts/settings-tester.pl` in the Evergreen source
703 * Follow the steps in the http://evergreen-ils.org/dokuwiki/doku.php?id=troubleshooting:checking_for_errors[troubleshooting guide].
704 * If you have faithfully followed the entire set of installation steps
705 listed here, you are probably extremely close to a working system.
706 Gather your configuration files and log files and contact the
707 http://evergreen-ils.org/communicate/mailing-lists/[Evergreen development
708 mailing list] for assistance before making any drastic changes to your system
713 Need help installing or using Evergreen? Join the mailing lists at
714 http://evergreen-ils.org/communicate/mailing-lists/ or contact us on the Freenode
715 IRC network on the #evergreen channel.
719 This work is licensed under the Creative Commons Attribution-ShareAlike 3.0
720 Unported License. To view a copy of this license, visit
721 http://creativecommons.org/licenses/by-sa/3.0/ or send a letter to Creative
722 Commons, 444 Castro Street, Suite 900, Mountain View, California, 94041, USA.