+++ /dev/null
-README for Evergreen trunk
-
-Installing prerequisites:
-========================
-Evergreen has a number of prerequisite packages that must be installed
-before you can successfully configure, compile, and install Evergreen.
-
-1. Begin by installing the most recent version of OpenSRF (1.6.2 or later).
-You can download OpenSRF releases from
-http://evergreen-ils.org/downloads
-
-2. On Debian and Ubuntu, the easiest way to install the rest of the
-prerequisites for Evergreen is to use the Makefile.install prerequisite
-installer.
-
-Issue the following commands as the root user to install prerequisites
-using the Makefile.install prerequisite installer, substituting
-"debian-etch", "debian-lenny", "fedora-14", "ubuntu-hardy", "ubuntu-lucid",
-"centos", or "rhel" for <osname> below:
-
-make -f Open-ILS/src/extras/Makefile.install <osname>
-
-Note: "centos" and "rhel" are less tested than the debian, fedora,
-and ubuntu options. Your patches and suggestions for improvement are
-welcome!
-
-Configuration and compilation instructions:
-==========================================
-
-For the time being, we are still installing everything in the /openils/
-directory. If you are working with a version of Evergreen taken directly
-from the Subversion repository, rather than a packaged version of Evergreen,
-first see "Developer instructions" below.
-
-Otherwise, issue the following commands to configure and build Evergreen:
-
-./configure --prefix=/openils --sysconfdir=/openils/conf
-make
-
-Installation instructions:
-=========================
-
-Once you have configured and compiled Evergreen, issue the following
-command as the root user to install Evergreen:
-
-make STAFF_CLIENT_STAMP_ID=rel_trunk install
-
-This will install Evergreen, including example configuration files in
-/openils/conf/ that you can use as templates for your own configuration files.
-The STAFF_CLIENT_STAMP_ID variable stamps the server-side and client-side files
-for the staff client to ensure that they match.
-
-Install Dojo Toolkit:
-====================
-
-Evergreen uses the Dojo Toolkit to support its Web and staff client interfaces.
-
-Download the Dojo Toolkit (Dojo + Dijit + DojoX) from
-http://dojotoolkit.org/downloads
-
-Issue the following commands as the root user to fetch, extract, and copy the
-files into the correct directory, adjusting the version number to match the
-version of the Dojo Toolkit that you downloaded:
-
-wget http://download.dojotoolkit.org/release-1.3.3/dojo-release-1.3.3.tar.gz
-tar -C /openils/var/web/js -xzf dojo-release-1.3.3.tar.gz
-cp -r /openils/var/web/js/dojo-release-1.3.3/* /openils/var/web/js/dojo/.
-
-Create the oils_web.xml configuration file:
-==========================================
-Many administration interfaces, such as acquisitions, bookings, and various
-configuration screens, depend on the correct configuration of HTML templates.
-Copying the sample configuration file into place should work in most cases:
-
-cp /openils/conf/oils_web.xml.example /openils/conf/oils_web.xml
-
-Change ownership of the Evergreen files:
-=======================================
-
-All files in the /openils/ directory and subdirectories must be owned by the
-"opensrf" user. Issue the following command as the root user to change the
-ownership on the files:
-
-chown -R opensrf:opensrf /openils
-
-Configure the Apache Web server:
-===============================
-
-Use the example configuration files in Open-ILS/examples/apache/ to configure
-your Web server for the Evergreen catalog, staff client, Web services, and
-administration interfaces.
-
-Configure OpenSRF for the Evergreen application:
-===============================================
-
-There are a number of example OpenSRF configuration files in /openils/conf/ that
-you can use as a template for your Evergreen installation.
-
-cp /openils/conf/opensrf_core.xml.example /openils/conf/opensrf_core.xml
-cp /openils/conf/opensrf.xml.example /openils/conf/opensrf.xml
-
-When you installed OpenSRF, you will have created four Jabber users on two
-separate domains and edited the opensrf_core.xml file accordingly. Please
-refer back to the OpenSRF README and edit the Evergreen version of the
-opensrf_core.xml file using the same Jabber users and domains as you used
-while installing and testing OpenSRF.
-
-eg_db_config.pl, described in the following section, will set the database
-connection information in opensrf.xml for you.
-
-Creating the Evergreen database:
-===============================
-
-PostgreSQL 9.0 will be installed on your system by the Makefile.install
-prerequisite installer if packages are available for your distribution, or
-you will have to compile PostgreSQL 9.0 from source and install it (which
-is beyond the scope of this document).
-
-Once the PostgreSQL database server has been installed, you will need to
-create the database and add the appropriate languages and extensions to
-support Evergreen. Issue the following commands as the "postgres" user to set
-up a database called "evergreen". Note that the location of the PostgreSQL
-"contrib" packages may vary depending on your distribution. In the following
-commands, we assume that you are working with PostgreSQL 9.0 on a Debian-based
-system:
-
-createdb --template template0 --encoding UNICODE evergreen
-createlang plperl evergreen
-createlang plperlu evergreen
-createlang plpgsql evergreen
-psql -f /usr/share/postgresql/9.0/contrib/tablefunc.sql -d evergreen
-psql -f /usr/share/postgresql/9.0/contrib/tsearch2.sql -d evergreen
-psql -f /usr/share/postgresql/9.0/contrib/pgxml.sql -d evergreen
-psql -f /usr/share/postgresql/9.0/contrib/hstore.sql -d evergreen
-
-Once you have created the Evergreen database, you need to create a PostgreSQL
-user to access the database. Issue the following command as the "postgres"
-user to create a new PostgreSQL user named "evergreen". When prompted, enter
-the new user's password and answer "yes" to make the new role a superuser:
-
-createuser -P evergreen
-
-Once you have created the Evergreen database, you also need to create the
-database schema and configure your configuration files to point at the
-database server. Issue the following command as root from inside the Evergreen
-source directory, replacing <user>, <password>, <hostname>, <port>, and <dbname>
-with the appropriate values for your PostgreSQL database, and <admin-user> and
-<admin-pass> with the values you want for the default Evergreen administrator
-account:
-
-perl Open-ILS/src/support-scripts/eg_db_config.pl --update-config \
- --service all --create-schema --create-offline \
- --user <user> --password <password> --hostname <hostname> --port <port> \
- --database <dbname> --admin-user <admin-user> --admin-pass <admin-pass>
-
-This will create the database schema and configure all of the services in
-your /openils/conf/opensrf.xml configuration file to point to that database.
-It also creates the configuration files required by the Evergreen cgi-bin
-administration scripts, and set the user name and password for the default
-Evergreen administrator account to your requested values.
-
-Developer instructions:
-======================
-
-Developers working directly with the source code from the Subversion
-repository will also need to install some extra packages and perform
-one more step before they can proceed with the "./configure" step.
-
-Install the following packages:
- * autoconf
- * automake
- * libtool
-
-Run the following command in the source directory to generate the configure
-script and Makefiles:
-
-./autogen.sh
-
-After running 'make install', developers also need to install the Dojo Toolkit
-set of JavaScript libraries. The appropriate version of Dojo is included
-in Evergreen release tarballs; developers should install the Dojo 1.3.3
-version of Dojo as follows:
-
-wget http://download.dojotoolkit.org/release-1.3.3/dojo-release-1.3.3.tar.gz
-tar xzf dojo-release-1.3.3.tar.gz
-cp -r dojo-release-1.3.3/* /openils/var/web/js/dojo/.
-
-Getting help:
-============
-
-Need help installing or using Evergreen? Join the mailing lists at
-http://evergreen-ils.org/listserv.php or contact us on the Freenode
-IRC network on the #evergreen channel.
projects / evergreen-equinox.git / blobdiff